[ARM] tegra: add nvos/nvrm/nvmap drivers

arch/arm/mach-tegra/nv/include/nverrval.h

Index: arch/arm/mach-tegra/nv/include/nverrval.h
diff --git a/arch/arm/mach-tegra/nv/include/nverrval.h b/arch/arm/mach-tegra/nv/include/nverrval.h
new file mode 100755
index 0000000000000000000000000000000000000000..8be2cbf920936e9b9781a5d3872a96adf50bff9f
--- /dev/null
+++ b/arch/arm/mach-tegra/nv/include/nverrval.h
@@ -0,0 +1,383 @@
+/*
+ * Copyright (c) 2006-2009 NVIDIA Corporation.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of the NVIDIA Corporation nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/**
+ * nverrval.h is a header used for macro expansion of the errors defined for
+ * the Nv methods & interfaces.
+ *
+ * This header is NOT protected from being included multiple times, as it is
+ * used for C pre-processor macro expansion of error codes, and the
+ * descriptions of those error codes.
+ *
+ * Each error code has a unique name, description and value to make it easier
+ * for developers to identify the source of a failure.  Thus there are no
+ *generic or unknown error codes.
+ */
+
+/**
+* @defgroup nv_errors NVIDIA Error Codes
+*
+* Provides return error codes for functions.
+*
+* @ingroup nvodm_errors
+* @{
+*/
+
+/** common error codes */
+NVERROR(Success,                            0x00000000, "success")
+NVERROR(NotImplemented,                     0x00000001, "method or interface is not implemented")
+NVERROR(NotSupported,                       0x00000002, "requested operation is not supported")
+NVERROR(NotInitialized,                     0x00000003, "method or interface is not initialized")
+NVERROR(BadParameter,                       0x00000004, "bad parameter to method or interface")
+NVERROR(Timeout,                            0x00000005, "not completed in the expected time")
+NVERROR(InsufficientMemory,                 0x00000006, "insufficient system memory")
+NVERROR(ReadOnlyAttribute,                  0x00000007, "cannot write a read-only attribute")
+NVERROR(InvalidState,                       0x00000008, "module is in invalid state to perform the requested operation")
+NVERROR(InvalidAddress,                     0x00000009, "invalid address")
+NVERROR(InvalidSize,                        0x0000000A, "invalid size")
+NVERROR(BadValue,                           0x0000000B, "illegal value specified for parameter")
+NVERROR(AlreadyAllocated,                   0x0000000D, "resource has already been allocated")
+NVERROR(Busy,                               0x0000000E, "busy, try again")
+NVERROR(ModuleNotPresent,                   0x000a000E, "hw module is not peresent")
+NVERROR(ResourceError,                      0x0000000F, "clock, power, or pinmux resource error")
+NVERROR(CountMismatch,                      0x00000010, "Encounter Error on count mismatch")
+
+/* surface specific error codes */
+NVERROR(InsufficientVideoMemory,            0x00010000, "insufficient video memory")
+NVERROR(BadSurfaceColorScheme,              0x00010001, "this surface scheme is not supported in the current controller")
+NVERROR(InvalidSurface,                     0x00010002, "invalid surface")
+NVERROR(SurfaceNotSupported,                0x00010003, "surface is not supported")
+
+/* display specific error codes */
+NVERROR(DispInitFailed,                     0x00020000, "display initialization failed")
+NVERROR(DispAlreadyAttached,                0x00020001, "the display is already attached to a controller")
+NVERROR(DispTooManyDisplays,                0x00020002, "the controller has too many displays attached")
+NVERROR(DispNoDisplaysAttached,             0x00020003, "the controller does not have an attached display")
+NVERROR(DispModeNotSupported,               0x00020004, "the mode is not supported by the display or controller")
+NVERROR(DispNotFound,                       0x00020005, "the requested display was not found")
+NVERROR(DispAttachDissallowed,              0x00020006, "the display cannot attach to the given controller")
+NVERROR(DispTypeNotSupported,               0x00020007, "display type not supported")
+NVERROR(DispAuthenticationFailed,           0x00020008, "display authenication failed")
+NVERROR(DispNotAttached,                    0x00020009, "display not attached")
+NVERROR(DispSamePwrState,                   0x0002000A, "display already in requested power state")
+NVERROR(DispEdidFailure,                    0x0002000B, "edid read/parsing failure")
+
+/* NvOs error codes */
+NVERROR(FileWriteFailed,                    0x00030000, "the file write operation failed")
+NVERROR(FileReadFailed,                     0x00030001, "the file read operation failed")
+NVERROR(EndOfFile,                          0x00030002, "the end of file has been reached")
+NVERROR(FileOperationFailed,                0x00030003, "the file operation has failed")
+NVERROR(DirOperationFailed,                 0x00030004, "the directory operation has failed")
+NVERROR(EndOfDirList,                       0x00030005, "there are no more entries in the directory")
+NVERROR(ConfigVarNotFound,                  0x00030006, "the configuration variable is not present")
+NVERROR(InvalidConfigVar,                   0x00030007, "the configuration variable is corrupted")
+NVERROR(LibraryNotFound,                    0x00030008, "the dynamic library was not found for open")
+NVERROR(SymbolNotFound,                     0x00030009, "the symbol in a dyanmic library was not found")
+NVERROR(MemoryMapFailed,                    0x0003000a, "the memory mapping operation failed")
+NVERROR(IoctlFailed,                        0x0003000f, "the ioctl failed")
+NVERROR(AccessDenied,                       0x00030010, "the pointer is invalid or require additional privileges for access")
+NVERROR(DeviceNotFound,                     0x00030011, "requested device is not found")
+NVERROR(KernelDriverNotFound,               0x00030012, "kernel driver not found")
+NVERROR(FileNotFound,                       0x00030013, "File or directory not found")
+
+/* I/O devices */
+NVERROR(SpiReceiveError,                    0x00040000, "spi receive error" )
+NVERROR(SpiTransmitError,                   0x00040001, "spi transmit error" )
+NVERROR(HsmmcCardNotPresent,                0x00041000, "hsmmc card not present")
+NVERROR(HsmmcControllerBusy,                0x00041001, "hsmmc controller is busy")
+NVERROR(HsmmcAutoDetectCard,                0x00041002, "auto detect the card in hsmmc slot")
+NVERROR(SdioCardNotPresent,                 0x00042000, "sdio card not present")
+NVERROR(SdioInstanceTaken,                  0x00042001, "Instance unavailable or in use")
+NVERROR(SdioControllerBusy,                 0x00042002, "controller is busy")
+NVERROR(SdioReadFailed,                     0x00042003, "read transaction has failed")
+NVERROR(SdioWriteFailed,                    0x00042004, "write transaction has failed")
+NVERROR(SdioBadBlockSize,                   0x00042005, "bad block size")
+NVERROR(SdioClockNotConfigured,             0x00042006, "Clock is not configured")
+NVERROR(SdioSdhcPatternIntegrityFailed,     0x00042007, "SDHC Check pattern integrity failed")
+NVERROR(SdioCommandFailed,                  0x00042008, "command failed to execute")
+NVERROR(SdioCardAlwaysPresent,              0x00042009, "sdio card is soldered")
+NVERROR(SdioAutoDetectCard,                 0x0004200a, "auto detect the sd card")
+NVERROR(UsbInvalidEndpoint,                 0x00043000, "usb invalid endpoint")
+NVERROR(UsbfTxfrActive,                     0x00043001, "The endpoint has an active transfer in progress.")
+NVERROR(UsbfTxfrComplete,                   0x00043002, "The endpoint has a completed transfer that has not been cleared.")
+NVERROR(UsbfTxfrFail,                       0x00043003, "The endpoint transfer is failed.")
+NVERROR(UsbfEpStalled,                      0x00043004, "The endpoint has been placed in a halted or stalled state.")
+NVERROR(UsbfCableDisConnected,              0x00043005, "usb cable disconnected")
+NVERROR(UartOverrun,                        0x00044000, "overrun occurred when receiving the data")
+NVERROR(UartFraming,                        0x00044001, "data received had framing error")
+NVERROR(UartParity,                         0x00044002, "data received had parity error")
+NVERROR(UartBreakReceived,                  0x00044004, "received break signal")
+NVERROR(I2cReadFailed,                      0x00045000, "Failed to read data through I2C")
+NVERROR(I2cWriteFailed,                     0x00045001, "Failed to write data through I2C")
+NVERROR(I2cDeviceNotFound,                  0x00045003, "Slave Device Not Found")
+NVERROR(I2cInternalError,                   0x00045004, "The controller reports the error during transaction like fifo overrun, underrun")
+NVERROR(I2cArbitrationFailed,               0x00045005, "Master does not able to get the control of bus")
+NVERROR(IdeHwError,                         0x00046000, "Ide HW error")
+NVERROR(IdeReadError,                       0x00046001, "Ide read error")
+NVERROR(IdeWriteError,                      0x00046002, "Ide write error")
+
+/* OWR error codes */
+NVERROR(OwrReadFailed,                      0x00047000, "OWR data reading failed")
+NVERROR(OwrWriteFailed,                     0x00047001, "OWR data write failed")
+NVERROR(OwrBitTransferFailed,               0x00047002, "OWR bit transfer failed")
+NVERROR(OwrInvalidOffset,                   0x00047003, "OWR invalid offset")
+
+/* Nv2D error codes */
+NVERROR(InvalidOperation,                   0x00050000, "invalid operation")
+
+/* NvRm error codes */
+NVERROR(RmInitFailed,                       0x00060000, "rm failed to initialize")
+NVERROR(RmChannelInitFailure,               0x00060001, "channel init failed")
+NVERROR(RmStreamInitFailure,                0x00060002, "stream init failed")
+NVERROR(RmSyncPointAllocFailure,            0x00060003, "sync point alloc failed")
+NVERROR(ResourceAlreadyInUse,               0x00060004, "resource already in use")
+NVERROR(DmaBusy,                            0x00061000, "the dma channel is busy and not able to take any more request")
+NVERROR(InvalidSourceId,                    0x00061001, "invalid source id")
+NVERROR(DmaChannelNotAvailable,             0x00061002, "dma channel not available")
+
+/* NvIsp error codes */
+NVERROR(NoConnectedImager,                  0x00070001, "no imager connected")
+NVERROR(UnsupportedResolution,              0x00070002, "unsupported resolution")
+NVERROR(I2CCommunicationError,              0x00070003, "i2c communication failed")
+NVERROR(IspConfigFileParseError,            0x00070004, "isp config file parse error")
+NVERROR(TooDark,                            0x00070006, "image too dark for 3A operation")
+NVERROR(InvalidIspConfigAttribute,          0x00070007, "invalid isp config attribute")
+NVERROR(InvalidIspConfigAttributeElement,   0x00070008, "invalid isp config attribute element")
+NVERROR(IspConfigSyntaxError,               0x00070009, "isp config syntax error")
+NVERROR(ImagerVersionNotSupported,          0x0007000A, "imager version not supported")
+NVERROR(CorruptedBuffer,                    0x0007000B, "buffer is corrupted")
+
+
+/* NvTest error codes */
+NVERROR(TestApplicationFailed,              0x00080000, "the test application failed")
+NVERROR(TestNoUserInput,                    0x00080001, "no user input available")
+NVERROR(TestCommandLineError,               0x00080002, "command line parsing error")
+NVERROR(TestDataVerificationFailed,         0x00080003, "Data verification failed error")
+NVERROR(TestServerFileReadFailed,           0x00081000, "reading the test file failed")
+NVERROR(TestServerInvalidAddress,           0x00081001, "invalid connection address")
+NVERROR(TestServerMemoryLimitExceeded,      0x00081002, "target memory limit exceeded")
+
+/* NvCam error codes */
+NVERROR(ColorFormatNotSupported,            0x00090006, "color format not supported")
+
+/* Transport error codes */
+NVERROR(TransportPortAlreadyExist,          0x000A0001, "The port name already exist.")
+NVERROR(TransportMessageBoxEmpty,           0x000A0003, "Received Message box empty.")
+NVERROR(TransportMessageBoxFull,            0x000A0004, "Message box is full and not able to send the message.")
+NVERROR(TransportConnectionFailed,          0x000A0006, "Making connection to port is failed.")
+NVERROR(TransportNotConnected,              0x000A0007, "Port is not connected.")
+
+/* Nand error codes */
+NVERROR(NandReadFailed,                     0x000B0000, "Nand Read failed")
+NVERROR(NandProgramFailed,                  0x000B0001, "Nand Program failed")
+NVERROR(NandEraseFailed,                    0x000B0002, "Nand Erase failed")
+NVERROR(NandCopyBackFailed,                 0x000B0003, "Nand Copy back failed")
+NVERROR(NandOperationFailed,                0x000B0004, "requested Nand operation failed")
+NVERROR(NandBusy,                           0x000B0005, "Nand operation incomplete and is busy")
+NVERROR(NandNotOpened,                      0x000B0006, "Nand driver not opened")
+NVERROR(NandAlreadyOpened,                  0x000B0007, "Nand driver is already opened")
+NVERROR(NandBadOperationRequest,            0x000B0008, "status for wrong nand operation is requested ")
+NVERROR(NandCommandQueueError,              0x000B0009, "Command queue error occured ")
+NVERROR(NandReadEccFailed,                  0x000B0010, "Read with ECC resulted in uncorrectable errors")
+NVERROR(NandFlashNotSupported,              0x000B0011, "Nand flash on board is not supported by the ddk")
+NVERROR(NandLockFailed,                     0x000B0012, "Nand flash lock feature failed")
+NVERROR(NandErrorThresholdReached,          0x000B0013, "Ecc errors reached the threshold set")
+NVERROR(NandWriteFailed,                    0x000B0014, "Nand Write failed")
+NVERROR(NandBadBlock,                       0x000B0015, "Indicates a bad block on media")
+NVERROR(NandBadState,                       0x000B0016, "Indicates an invalid state")
+NVERROR(NandBlockIsLocked,                  0x000B0017, "Indicates the block is locked")
+NVERROR(NandNoFreeBlock,                    0x000B0018, "Indicates there is no free block in the flash")
+NVERROR(NandTTFailed,                       0x000B0019, "Nand TT Failure")
+NVERROR(NandTLFailed,                       0x000B001A, "Nand TL Failure")
+NVERROR(NandTLNoBlockAssigned,              0x000B001B, "Nand TL No Block Assigned")
+
+/* nvwinsys error codes */
+NVERROR(WinSysBadDisplay,                   0x000C0000, "bad display specified")
+NVERROR(WinSysNoDevice,                     0x000C0001, "no device found")
+NVERROR(WinSysBadDrawable,                  0x000C0002, "bad drawable")
+
+/* nvblserver error codes */
+NVERROR(BLServerFileReadFailed,             0x000D0000, "reading the bootloader file failed")
+NVERROR(BLServerInvalidAddress,             0x000D0001, "invalid connection address")
+NVERROR(BLServerInvalidElfFile,             0x000D0002, "invalid elf file")
+NVERROR(BLServerConnectionFailed,           0x000D0003, "connection with target failed")
+NVERROR(BLServerMemoryLimitExceeded,        0x000D0005, "target memory limit exceeded")
+
+/* NvMM Audio Mixer error codes */
+NVERROR(AudioMixerPinTypeNotSupported,      0x000E0000, "Pin type is not supported")
+NVERROR(AudioMixerDirectionNotSupported,    0x000E0001, "Pin direction is not supported")
+NVERROR(AudioMixerNoMorePinsAvailable,      0x000E0002, "No more pins are available")
+NVERROR(AudioMixerBadPinNumber,             0x000E0003, "Bad pin number")
+
+/* NvMM Video Encoder error codes */
+NVERROR(VideoEncResolutionNotSupported,     0x000E1000, "Resolution parameters must be multiple of 16")
+
+/* NvMM JPEG Encoder error codes */
+NVERROR(JPEGEncHWError,                     0x000E2000, "HW encountered some error in Encoding: either ICQ is full or MEMDMA is busy")
+
+/* NvMM Video Decoder error codes */
+NVERROR(VideoDecRetainLock,                    0x000E3001, "Keep the HW lock with the decoder")
+NVERROR(VideoDecMataDataFound,                 0x000E3002, "Decoder has decoded Mata Data Information")
+NVERROR(VideoDecFrameDecoded,                  0x000E3004, "Decoder has decoded one complete Frame")
+NVERROR(VideoDecDecodedPartialFrame,           0x000E3008, "Decoder has decoded Frame Partially")
+NVERROR(VideoDecInsufficientBitstream,         0x000E3010, "unable to decode because of unavailablity of bitstream for decoding")
+NVERROR(VideoDecOutputSurfaceUnavailable,      0x000E3020, "Output surface is unavailable for storing current decoded frame")
+NVERROR(VideoDecUnsupportedStreamFormat,       0x000E3040, "Given i/p Stream format is not supported by Video Decoder")
+NVERROR(VideoDecFrameDecodedPlusVideoDecEvent, 0x000E3080, "Decoder has decoded one complete frame and need to send event to client")
+NVERROR(VideoDecFailed,                        0x000E3100, "Failed to decode")
+NVERROR(VideoDecDecodingComplete,              0x000E3200, "Decoder has finished decoding")
+NVERROR(VideoDecProvideNextIPBuffer,           0x000E3400, "Decoder is still using current buffer,mean while provide next ip buffer")
+NVERROR(VideoDecProvideCurrentIPBuffer,        0x000E3800, "provide Current ip buffer again")
+
+/* Vibrate shim error codes */
+NVERROR(PipeNotConnected,                      0x000F0000, "Indicates that there are no readers attached to the message queue")
+NVERROR(ReadQNotCreated,                       0x000F0001, "Some error creating the read message Q")
+
+/* Content Parser, Writer, Pipe error codes */
+NVERROR(ParserEndOfStream,                  0x00100000, "the end of stream has been reached")
+NVERROR(ParserFailedToGetData,              0x00100001, "Could not get data because of some Error")
+NVERROR(InSufficientBufferSize,             0x00100002, "InSufficientBufferSize for parser to read data")
+NVERROR(ParserReadFailure,                  0x00100003, "Encounter Error on parser reads")
+NVERROR(ParserOpenFailure,                  0x00100004, "Encounter Error on parser open")
+NVERROR(UnSupportedStream,                  0x00100005, "Error for Unsupported streams")
+NVERROR(ParserFailure,                      0x00100006, "Fail to Parse the file. Or General/logical Error encounter on other parser failures")
+NVERROR(ParserHeaderDecodeNotComplete,      0x00100007, "Could not get data because Header Decode is not complete")
+NVERROR(ParserCloseFailure,                 0x00100008, "Encounter Error on parser close")
+NVERROR(ParserMarkerHit,                    0x00100009, "Parser Marker HIT")
+NVERROR(ParserCorruptedStream,              0x0010000A, "Encounter error on corrupted Parser stream")
+NVERROR(ParserDRMLicenseNotFound,           0x0010000B, "DRM License Not Found")
+NVERROR(ParserDRMFailure,                   0x0010000C, "DRM Functionality Failed")
+NVERROR(ParserSeekUnSupported,              0x0010000D, "Seek UnSupported dueto non-index rntries etc., ")
+NVERROR(ParserTrickModeUnSupported,         0x0010000E, "Seek UnSupported dueto non-index rntries etc., ")
+NVERROR(ParserCoreNotCreated,               0x0010000F, "Core not created ")
+NVERROR(UnSupported_VideoStream,            0x00100010, "Error for Unsupported streams")
+NVERROR(UnSupported_AudioStream,            0x00100011, "Error for Unsupported streams")
+NVERROR(WriterOpenFailure,                  0x00101001, "Encounter Error on writer open")
+NVERROR(WriterUnsupportedStream,            0x00101002, "Error for Unsupported streams in writer")
+NVERROR(WriterUnsupportedUserData,          0x00101003, "Error Unsupported user data  set in writer")
+NVERROR(WriterFileSizeLimitExceeded,        0x00101004, "File size limit exceeded in writer")
+NVERROR(WriterInsufficientMemory,           0x00101005, "Insufficient memory in writer")
+NVERROR(WriterFailure,                      0x00101006, "General/logical Error encounter on other writer failures")
+NVERROR(WriterCloseFailure,                 0x00101007, "Encounter Error on writer close")
+NVERROR(WriterInitFailure,                  0x00101008, "Writer Init Failed")
+NVERROR(WriterFileWriteLimitExceeded,       0x00101009, "File Write limit exceeded in writer")
+NVERROR(ContentPipeNoData,                  0x00102001, "Data not available")
+NVERROR(ContentPipeNoFreeBuffers,           0x00102002, "No free buffers")
+NVERROR(ContentPipeSpareAreaInUse,          0x00102003, "Spare buffer is in use")
+NVERROR(ContentPipeEndOfStream,             0x00102004, "End of stream reached")
+NVERROR(ContentPipeNotReady,                0x00102005, "Not Ready")
+NVERROR(ContentPipeInNonCachingMode,        0x00102006, "In non-caching mode")
+NVERROR(ContentPipeInsufficientMemory,      0x00102007, "Insufficient memory in ContentPipe")
+NVERROR(ContentPipeNotInvalidated,          0x00102008, "ContentPipe memory is not invalidated")
+
+NVERROR(UnSupportedMetadata,                0x00102009, "UnSupportedMetadata")
+NVERROR(MetadataSuccess,                    0x0010200A, "Successfully Extracted the Metadata key")
+NVERROR(MetadataFailure,                    0x0010200B, "Error Encountered during Meta data Extraction")
+NVERROR(NewMetaDataAvailable,               0x0010200C, "NewMetaDataAvailable")
+
+/* TrackList error codes */
+NVERROR(TrackListInvalidTrackIndex,         0x00110001, "Invalid track number")
+NVERROR(TrackListError,                     0x00110002, "Error encounterd in TrackList Operation")
+NVERROR(TrackListItemStillPlayingError,     0x00110003, " Track list item is currently playing")
+NVERROR(TrackListNotPlaying,                0x00110004, " Track list is not playing")
+
+/* nv3p error codes */
+NVERROR(Nv3pUnrecoverableProtocol,          0x00120000, "unrecoverable protocol error")
+NVERROR(Nv3pBadPacketType,                  0x00120001, "bad packet type")
+NVERROR(Nv3pPacketNacked,                   0x00120002, "packet was nacked")
+NVERROR(Nv3pBadReceiveLength,               0x00120003, "bad receive length")
+NVERROR(Nv3pBadReturnData,                  0x00120004, "bad return data")
+
+/* AES error codes */
+NVERROR(AesClearSbkFailed,                  0x00130000, "AES clear Secure Boot Key Failed")
+NVERROR(AesLockSskFailed,                   0x00130001, "AES Lock Secure Storage Key Failed")
+NVERROR(AesDisableCryptoFailed,             0x00130002, "AES disable crypto failed")
+
+/* Block Driver error codes */
+/* generic error codes */
+NVERROR(BlockDriverIllegalIoctl,            0x00140001, "Block Driver illegal IOCTL invoked")
+NVERROR(BlockDriverOverlappedPartition,     0x00140002, "Block Driver partition overlap")
+NVERROR(BlockDriverNoPartition,             0x00140003, "Block Driver IOCTL call needs partition create")
+NVERROR(BlockDriverIllegalPartId,           0x00140004, "Block Driver operation using illegal partition ID")
+NVERROR(BlockDriverWriteVerifyFailed,       0x00140005, "Block Driver write data comparison failed")
+/* Nand specific block driver errors */
+NVERROR(NandBlockDriverEraseFailure,        0x00140011, "Nand Block Driver erase failed")
+NVERROR(NandBlockDriverWriteFailure,        0x00140012, "Nand Block Driver write failed")
+NVERROR(NandBlockDriverReadFailure,         0x00140013, "Nand Block Driver read failed")
+NVERROR(NandBlockDriverLockFailure,         0x00140014, "Nand Block Driver lock failed")
+NVERROR(NandRegionIllegalAddress,           0x00140015, "Nand Block Driver sector access illegal")
+NVERROR(NandRegionTableOpFailure,           0x00140016, "Nand Block Driver region operation failed")
+NVERROR(NandBlockDriverMultiInterleave,     0x00140017, "Nand Block Driver multiple interleave modes")
+NVERROR(NandTagAreaSearchFailure,           0x0014001c, "Nand Block Driver tag area search failed")
+/* EMMC specific block driver errors */
+NVERROR(EmmcBlockDriverLockNotSupported,    0x00140101, "EMMC Block Driver Lock operation not supported")
+NVERROR(EmmcBlockDriverLockUnaligned,       0x00140102, "EMMC Block Driver Lock area size or location unaligned")
+NVERROR(EmmcBlockDriverIllegalStateRead,    0x00140103, "EMMC Block Driver Read when state is not TRANS")
+NVERROR(EmmcBlockDriverIllegalStateWrite,   0x00140104, "EMMC Block Driver Write when state is not TRANS")
+NVERROR(EmmcCommandFailed,                  0x00140105, "EMMC Block Driver command failed to execute")
+NVERROR(EmmcReadFailed,                     0x00140106, "EMMC Block Driver Read failed")
+NVERROR(EmmcWriteFailed,                    0x00140107, "EMMC Block Driver Write failed")
+NVERROR(EmmcBlockDriverEraseFailure,        0x00140108, "Emmc Block Driver erase failed")
+NVERROR(EmmcBlockDriverIllegalAddress,      0x00140109, "Emmc Block Driver address is illegal or misaligned")
+NVERROR(EmmcBlockDriverLockFailure,         0x0014010A, "Emmc Block Driver lock failed")
+NVERROR(EmmcBlockDriverBlockIsLocked,       0x0014010B, "Emmc Block Driver Accessed block is locked")
+/* Mipi Hsi error codes */
+NVERROR(MipiHsiTxFifoEmpty,                 0x00140200, "TX_FIFO_CNT in Status and Interrupt Identification Register is zero")
+NVERROR(MipiHsiRxFifoEmpty,                 0x00140201, "RX_FIFO_CNT in Status and Interrupt Identification Register is zero")
+NVERROR(MipiHsiBusy,                        0x00140202, "Mipi Hsi controller is busy")
+NVERROR(MipiHsiHandleNotConfigured,         0x00140203, "Mipi Hsi handle is not configured")
+NVERROR(MipiHsiTransmitError,               0x00140204, "Mipi Hsi transmit error - check the write function ")
+NVERROR(MipiHsiReceiveError,                0x00140205, "Mipi Hsi receive error - check the read function")
+NVERROR(MipiHsiTransferIncomplete,          0x00140206, "Mipi Hsi requested number of packets are not transferred")
+
+/* Shader compiler error codes */
+NVERROR(SCCompileFail,                      0x00150000, "Source shader compilation failed")
+
+/* Drm error codes */
+NVERROR(DrmFailure,                         0x00160000, "Drm - Failed")
+NVERROR(DrmInvalidArg,                      0x00160001, "Drm Invalid arguments passed")
+NVERROR(DrmOutOfMemory,                     0x00160002, "Drm-Memory insufficent")
+NVERROR(DrmFileNotFound,                    0x00160003, "Drm - File not found")
+NVERROR(DrmBufferTooSmall,                  0x00160004, "Drm- Buffer size passed is too small")
+NVERROR(DrmInvalidLicense,                  0x00160005, "Drm - Invalid license")
+NVERROR(DrmLicenseExpired,                  0x00160006, "Drm- License expired")
+NVERROR(DrmRightsNotAvailable,              0x00160007, "Drm-Right are not available")
+NVERROR(DrmLicenseNotFound,                 0x00160008, "Drm - License it not found")
+NVERROR(DrmInvalidBindId,                   0x00160009, "Drm - Invalid Bind Id ")
+NVERROR(DrmVersionNotSupported,             0x0016000a, "Drm-Unsupported Version")
+NVERROR(DrmMeteringNotSupported,            0x0016000b, "Drm- Metering is not supported")
+NVERROR(DrmDecryptionFailed,                0x0016000c, "Drm- Decryption failed")
+/* System Update error codes */
+NVERROR(SysUpdateInvalidBLVersion,          0x00170000, "NvSysUpdate - InvalidBL Version")
+
+/** @} */
+/* ^^^ ADD ALL NEW ERRORS RIGHT ABOVE HERE ^^^ */