Revert of Add SSE4 optimization of S32A_Opaque_Blitrow

src/opts/SkBlitRow_opts_SSE4_x64_asm.S

Index: src/opts/SkBlitRow_opts_SSE4_x64_asm.S
diff --git a/src/opts/SkBlitRow_opts_SSE4_x64_asm.S b/src/opts/SkBlitRow_opts_SSE4_x64_asm.S
deleted file mode 100644
index 31b2a3da1f71512fccffd08609b48c7973838932..0000000000000000000000000000000000000000
--- a/src/opts/SkBlitRow_opts_SSE4_x64_asm.S
+++ /dev/null
@@ -1,505 +0,0 @@
-/*
- * Copyright 2013 The Android Open Source Project
- *
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- */
-
-#if !defined(_MSC_VER)
-
-#define EXTRACT_ALPHA(var1, var2) \
-    movdqa      %var1, %var2;           /* Clone source pixels to extract alpha */\
-    psrlw       $8, %var2;              /* Discard red and blue, leaving alpha and green */\
-    pshufhw     $0xF5, %var2, %var2;    /* Repeat alpha for scaling (high) */\
-    movdqa      %xmm6, %xmm4;           \
-    pshuflw     $0xF5, %var2, %var2;    /* Repeat alpha for scaling (low) */\
-    movdqa      %xmm5, %xmm3;           \
-    psubw       %var2, %xmm4            /* Finalize alpha calculations */
-
-#define SCALE_PIXELS \
-    psllw       $8, %xmm5;              /* Filter out red and blue components */\
-    pmulhuw     %xmm4, %xmm5;           /* Scale red and blue */\
-    psrlw       $8, %xmm3;              /* Filter out alpha and green components */\
-    pmullw      %xmm4, %xmm3            /* Scale alpha and green */
-
-
-/*
- * void S32A_Opaque_BlitRow32_SSE4(SkPMColor* SK_RESTRICT dst,
- *                                 const SkPMColor* SK_RESTRICT src,
- *                                 int count, U8CPU alpha)
- *
- * This function is divided into six blocks: initialization, blit 4-15 pixels,
- * blit 0-3 pixels, align destination for 16+ pixel blits,
- * blit 16+ pixels with source unaligned, blit 16+ pixels with source aligned.
- * There are some code reuse between the blocks.
- *
- * The primary optimization comes from checking the source pixels' alpha value.
- * If the alpha is zero, the pixel can be skipped entirely.
- * If the alpha is fully opaque, the pixel can be copied directly to the destination.
- * According to collected statistics, these two cases are the most common.
- * The main loop(s) uses pre-loading and unrolling in an attempt to reduce the
- * memory latency worse-case.
- */
-
-#ifdef __clang__
-    .text
-    .global _S32A_Opaque_BlitRow32_SSE4_asm
-#else
-    .section .text.sse4.2,"ax",@progbits
-    .type S32A_Opaque_BlitRow32_SSE4_asm, @function
-    .global S32A_Opaque_BlitRow32_SSE4_asm
-#endif
-
-    .p2align 4
-_S32A_Opaque_BlitRow32_SSE4_asm:
-S32A_Opaque_BlitRow32_SSE4_asm:
-    .cfi_startproc
-    prefetcht0  (%rsi)
-    movl        %edx, %ecx              // Pixel count
-    movq        %rdi, %rdx              // Destination pointer
-    movq        %rsi, %rax              // Source pointer
-
-    // Setup SSE constants
-    movdqa      .LAlphaCheckMask(%rip), %xmm7  // 0xFF000000 mask to check alpha
-    movdqa      .LInverseAlphaCalc(%rip), %xmm6// 16-bit 256 to calculate inv. alpha
-    movdqa      .LResultMergeMask(%rip), %xmm0 // 0x00FF00FF mask (Must be in xmm0 because of pblendvb)
-
-    subl        $4, %ecx                // Check if we have only 0-3 pixels
-    js          .LReallySmall
-    cmpl        $11, %ecx               // Do we have enough pixels to run the main loop?
-    ja          .LBigBlit
-
-    // Handle small blits (4-15 pixels)
-    ////////////////////////////////////////////////////////////////////////////////
-    xorq        %rdi, %rdi              // Reset offset to zero
-
-.LSmallLoop:
-    lddqu       (%rax, %rdi), %xmm1     // Load four source pixels
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    ja          .LSmallAlphaNotOpaqueOrZero
-    jz          .LSmallAlphaZero
-    movdqu      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-.LSmallAlphaZero:
-    addq        $16, %rdi
-    subl        $4, %ecx                // Check if there are four additional pixels, at least
-    jns         .LSmallLoop
-    jmp         .LSmallRemaining
-
-    // Handle mixed alphas (calculate and scale)
-    .p2align 4
-.LSmallAlphaNotOpaqueOrZero:
-    lddqu       (%rdx, %rdi), %xmm5     // Load four destination pixels
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-
-    addq        $16, %rdi
-    subl        $4, %ecx                // Check if we can store all four pixels
-    pblendvb    %xmm0, %xmm5, %xmm3
-    paddb       %xmm3, %xmm1            // Add source and destination pixels together
-    movdqu      %xmm1, -16(%rdx, %rdi)  // Store four destination pixels
-    jns         .LSmallLoop
-
-    // Handle the last 0-3 pixels (also used by the big unaligned loop)
-.LSmallRemaining:
-    cmpl        $-4, %ecx               // Check if we are done
-    je          .LSmallExit
-    sall        $2, %ecx                // Calculate offset for last pixels
-    movslq      %ecx, %rcx
-    addq        %rcx, %rdi
-
-    lddqu       (%rax, %rdi), %xmm1     // Load last four source pixels (overlapping)
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    jc          .LSmallRemainingStoreAll// If all alphas are opaque, just store (overlapping)
-    jz          .LSmallExit             // If all alphas are zero, skip the pixels completely
-
-    // Handle mixed alphas (calculate and scale)
-    lddqu       (%rdx, %rdi), %xmm5     // Load last four destination pixels (overlapping)
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-
-    psllw       $8, %xmm3               // Filter out red and blue components
-    pmulhuw     %xmm4, %xmm3            // Scale red and blue
-    movdqa      %xmm5, %xmm2
-    psrlw       $8, %xmm2               // Filter out alpha and green components
-    pmullw      %xmm4, %xmm2            // Scale alpha and green
-
-    cmpl        $-8, %ecx               // Check how many pixels should be written
-    pblendvb    %xmm0, %xmm3, %xmm2     // Combine results
-    paddb       %xmm2, %xmm1            // Add source and destination pixels together
-    jb          .LSmallPixelsLeft1
-    ja          .LSmallPixelsLeft3      // To avoid double-blending the overlapping pixels...
-    pblendw     $0xF0, %xmm1, %xmm5     // Merge only the final two pixels to the destination
-    movdqu      %xmm5, (%rdx, %rdi)     // Store last two destination pixels
-.LSmallExit:
-    ret
-
-.LSmallPixelsLeft1:
-    pblendw     $0xC0, %xmm1, %xmm5     // Merge only the final pixel to the destination
-    movdqu      %xmm5, (%rdx, %rdi)     // Store last destination pixel
-    ret
-
-.LSmallPixelsLeft3:
-    pblendw     $0xFC, %xmm1, %xmm5     // Merge only the final three pixels to the destination
-    movdqu      %xmm5, (%rdx, %rdi)     // Store last three destination pixels
-    ret
-
-.LSmallRemainingStoreAll:
-    movdqu      %xmm1, (%rdx, %rdi)     // Store last destination pixels (overwrite)
-    ret
-
-    // Handle really small blits (0-3 pixels)
-    ////////////////////////////////////////////////////////////////////////////////
-.LReallySmall:
-    addl        $4, %ecx
-    jle         .LReallySmallExit
-    pcmpeqd     %xmm1, %xmm1
-    cmpl        $2, %ecx                // Check how many pixels should be read
-    pinsrd      $0x0, (%rax), %xmm1     // Load one source pixel
-    pinsrd      $0x0, (%rdx), %xmm5     // Load one destination pixel
-    jb          .LReallySmallCalc
-    pinsrd      $0x1, 4(%rax), %xmm1    // Load second source pixel
-    pinsrd      $0x1, 4(%rdx), %xmm5    // Load second destination pixel
-    je          .LReallySmallCalc
-    pinsrd      $0x2, 8(%rax), %xmm1    // Load third source pixel
-    pinsrd      $0x2, 8(%rdx), %xmm5    // Load third destination pixel
-
-.LReallySmallCalc:
-    ptest       %xmm7, %xmm1            // Check if all alphas are opaque
-    jc          .LReallySmallStore      // If all alphas are opaque, just store
-
-    // Handle mixed alphas (calculate and scale)
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-
-    pand        %xmm0, %xmm5            // Filter out red and blue components
-    pmullw      %xmm4, %xmm5            // Scale red and blue
-    psrlw       $8, %xmm3               // Filter out alpha and green components
-    pmullw      %xmm4, %xmm3            // Scale alpha and green
-
-    psrlw       $8, %xmm5               // Combine results
-    pblendvb    %xmm0, %xmm5, %xmm3
-    paddb       %xmm3, %xmm1            // Add source and destination pixels together
-
-.LReallySmallStore:
-    cmpl        $2, %ecx                // Check how many pixels should be written
-    pextrd      $0x0, %xmm1, (%rdx)     // Store one destination pixel
-    jb          .LReallySmallExit
-    pextrd      $0x1, %xmm1, 4(%rdx)    // Store second destination pixel
-    je          .LReallySmallExit
-    pextrd      $0x2, %xmm1, 8(%rdx)    // Store third destination pixel
-.LReallySmallExit:
-    ret
-
-    // Handle bigger blit operations (16+ pixels)
-    ////////////////////////////////////////////////////////////////////////////////
-    .p2align 4
-.LBigBlit:
-    // Align destination?
-    testl       $0xF, %edx
-    lddqu       (%rax), %xmm1           // Pre-load four source pixels
-    jz          .LAligned
-
-    movq        %rdx, %rdi              // Calculate alignment of destination pointer
-    negq        %rdi
-    andl        $0xF, %edi
-
-    // Handle 1-3 pixels to align destination
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    jz          .LAlignDone             // If all alphas are zero, just skip
-    lddqu       (%rdx), %xmm5           // Load four destination pixels
-    jc          .LAlignStore            // If all alphas are opaque, just store
-
-    // Handle mixed alphas (calculate and scale)
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-
-    psllw       $8, %xmm3               // Filter out red and blue components
-    pmulhuw     %xmm4, %xmm3            // Scale red and blue
-    movdqa      %xmm5, %xmm2
-    psrlw       $8, %xmm2               // Filter out alpha and green components
-    pmullw      %xmm4, %xmm2            // Scale alpha and green
-
-    pblendvb    %xmm0, %xmm3, %xmm2     // Combine results
-    paddb       %xmm2, %xmm1            // Add source and destination pixels together
-
-.LAlignStore:
-    cmpl        $8, %edi                // Check how many pixels should be written
-    jb          .LAlignPixelsLeft1
-    ja          .LAlignPixelsLeft3
-    pblendw     $0x0F, %xmm1, %xmm5     // Blend two pixels
-    jmp .LAlignStorePixels
-
-.LAlignPixelsLeft1:
-    pblendw     $0x03, %xmm1, %xmm5     // Blend one pixel
-    jmp .LAlignStorePixels
-
-.LAlignPixelsLeft3:
-    pblendw     $0x3F, %xmm1, %xmm5     // Blend three pixels
-
-.LAlignStorePixels:
-    movdqu      %xmm5, (%rdx)           // Store destination pixels
-
-.LAlignDone:
-    addq        %rdi, %rax              // Adjust pointers and pixel count
-    addq        %rdi, %rdx
-    shrq        $2, %rdi
-    lddqu       (%rax), %xmm1           // Pre-load new source pixels (after alignment)
-    subl        %edi, %ecx
-
-.LAligned:                              // Destination is guaranteed to be 16 byte aligned
-    xorq        %rdi, %rdi              // Reset offset to zero
-    subl        $8, %ecx                // Decrease counter (Reserve four pixels for the cleanup)
-    testl       $0xF, %eax              // Check alignment of source pointer
-    jz          .LAlignedLoop
-
-    // Source not aligned to destination
-    ////////////////////////////////////////////////////////////////////////////////
-    .p2align 4
-.LUnalignedLoop:                        // Main loop for unaligned, handles eight pixels per iteration
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero00
-    lddqu       16(%rax, %rdi), %xmm2   // Pre-load four source pixels
-    jz          .LAlphaZero00
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-
-.LAlphaZero00:
-    ptest       %xmm7, %xmm2            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero01
-    lddqu       32(%rax, %rdi), %xmm1   // Pre-load four source pixels
-    jz          .LAlphaZero01
-    movdqa      %xmm2, 16(%rdx, %rdi)   // Store four destination pixels
-
-.LAlphaZero01:
-    addq        $32, %rdi               // Adjust offset and pixel count
-    subl        $8, %ecx
-    jae         .LUnalignedLoop
-    addl        $8, %ecx                // Adjust pixel count
-    jmp         .LLoopCleanup0
-
-    .p2align 4
-.LAlphaNotOpaqueOrZero00:
-    movdqa      (%rdx, %rdi), %xmm5     // Load four destination pixels
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-
-    lddqu       16(%rax, %rdi), %xmm2   // Pre-load four source pixels
-    pblendvb    %xmm0, %xmm5, %xmm3     // Combine results
-    paddb       %xmm3, %xmm1            // Add source and destination pixels together
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-
-    // Handle next four pixels
-    ptest       %xmm7, %xmm2            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero01
-    lddqu       32(%rax, %rdi), %xmm1   // Pre-load four source pixels
-    jz          .LAlphaZero02
-    movdqa      %xmm2, 16(%rdx, %rdi)   // Store four destination pixels
-.LAlphaZero02:
-    addq        $32, %rdi               // Adjust offset and pixel count
-    subl        $8, %ecx
-    jae         .LUnalignedLoop
-    addl        $8, %ecx                // Adjust pixel count
-    jmp         .LLoopCleanup0
-
-    .p2align 4
-.LAlphaNotOpaqueOrZero01:
-    movdqa      16(%rdx, %rdi), %xmm5   // Load four destination pixels
-    EXTRACT_ALPHA(xmm2, xmm1)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-
-    lddqu       32(%rax, %rdi), %xmm1   // Pre-load four source pixels
-    addq        $32, %rdi
-    pblendvb    %xmm0, %xmm5, %xmm3     // Combine results
-    paddb       %xmm3, %xmm2            // Add source and destination pixels together
-    subl        $8, %ecx
-    movdqa      %xmm2, -16(%rdx, %rdi)  // Store four destination pixels
-    jae         .LUnalignedLoop
-    addl        $8, %ecx                // Adjust pixel count
-
-    // Cleanup - handle pending pixels from loop
-.LLoopCleanup0:
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero02
-    jz          .LAlphaZero03
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-.LAlphaZero03:
-    addq        $16, %rdi
-    subl        $4, %ecx
-    js          .LSmallRemaining        // Reuse code from small loop
-    lddqu       (%rax, %rdi), %xmm1     // Pre-load four source pixels
-    jmp         .LLoopCleanup0
-
-.LAlphaNotOpaqueOrZero02:
-    movdqa      (%rdx, %rdi), %xmm5     // Load four destination pixels
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-
-    addq        $16, %rdi
-    subl        $4, %ecx
-    pblendvb    %xmm0, %xmm5, %xmm3     // Combine results
-    paddb       %xmm3, %xmm1            // Add source and destination pixels together
-    movdqa      %xmm1, -16(%rdx, %rdi)  // Store four destination pixels
-    js          .LSmallRemaining        // Reuse code from small loop
-    lddqu       (%rax, %rdi), %xmm1     // Pre-load four source pixels
-    jmp         .LLoopCleanup0
-
-    // Source aligned to destination
-    ////////////////////////////////////////////////////////////////////////////////
-    .p2align 4
-.LAlignedLoop:                          // Main loop for aligned, handles eight pixels per iteration
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero10
-    movdqa      16(%rax, %rdi), %xmm2   // Pre-load four source pixels
-    jz          .LAlphaZero10
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-
-.LAlphaZero10:
-    ptest       %xmm7, %xmm2            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero11
-    movdqa      32(%rax, %rdi), %xmm1   // Pre-load four source pixels
-    jz          .LAlphaZero11
-    movdqa      %xmm2, 16(%rdx, %rdi)   // Store four destination pixels
-
-.LAlphaZero11:
-    addq        $32, %rdi               // Adjust offset and pixel count
-    subl        $8, %ecx
-    jae         .LAlignedLoop
-    jmp         .LLoopCleanup1
-
-    .p2align 4
-.LAlphaNotOpaqueOrZero10:
-    movdqa      (%rdx, %rdi), %xmm5     // Load four destination pixels
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-
-    movdqa      16(%rax, %rdi), %xmm2   // Pre-load four source pixels
-    pblendvb    %xmm0, %xmm5, %xmm3     // Combine results
-    paddb       %xmm3, %xmm1            // Add source and destination pixels together
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-
-    // Handle next four pixels
-    ptest       %xmm7, %xmm2            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero11
-    movdqa      32(%rax, %rdi), %xmm1   // Pre-load four source pixels
-    jz          .LAlphaZero12
-    movdqa      %xmm2, 16(%rdx, %rdi)   // Store four destination pixels
-.LAlphaZero12:
-    addq        $32, %rdi               // Adjust offset and pixel count
-    subl        $8, %ecx
-    jae         .LAlignedLoop
-    jmp         .LLoopCleanup1
-
-    .p2align 4
-.LAlphaNotOpaqueOrZero11:
-    movdqa      16(%rdx, %rdi), %xmm5   // Load four destination pixels
-    EXTRACT_ALPHA(xmm2, xmm1)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-    movdqa      32(%rax, %rdi), %xmm1   // Pre-load four source pixels
-
-    addq        $32, %rdi
-    pblendvb    %xmm0, %xmm5, %xmm3     // Combine results
-    paddb       %xmm3, %xmm2            // Add source and destination pixels together
-    subl        $8, %ecx
-    movdqa      %xmm2, -16(%rdx, %rdi)  // Store four destination pixels
-    jae         .LAlignedLoop
-
-    // Cleanup - handle four pending pixels from loop
-.LLoopCleanup1:
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    ja          .LAlphaNotOpaqueOrZero12
-    jz          .LAlphaZero13
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-.LAlphaZero13:
-    addl        $8, %ecx                // Adjust offset and pixel count
-    jz          .LExit
-    addq        $16, %rdi
-    jmp         .LRemainLoop1
-
-.LAlphaNotOpaqueOrZero12:
-    movdqa      (%rdx, %rdi), %xmm5     // Load four destination pixels
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-
-    addl        $8, %ecx                // Adjust offset and pixel count
-    pblendvb    %xmm0, %xmm5, %xmm3     // Combine results
-    paddb       %xmm3, %xmm1            // Add source and destination pixels together
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-    jz          .LExit
-    addq        $16, %rdi
-
-    // Handle last 1-7 pixels
-.LRemainLoop1:
-    movdqa      (%rax, %rdi), %xmm1     // Load four source pixels
-    ptest       %xmm7, %xmm1            // Check if all alphas are zero or opaque
-    ja          .LRemainAlphaNotOpaqueOrZero1
-    jz          .LRemainAlphaZero1
-
-    // All alphas were opaque (copy)
-    subl        $4, %ecx                // Check if we have more than four pixels left
-    jle         .LRemainStore
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-    addq        $16, %rdi
-    jmp         .LRemainLoop1
-
-    // All alphas were zero (skip)
-    .p2align 4
-.LRemainAlphaZero1:
-    subl        $4, %ecx                // Check if we have more than four pixels left
-    jle         .LExit
-    addq        $16, %rdi
-    jmp         .LRemainLoop1
-
-    // Handle mixed alphas (calculate and scale)
-    .p2align 4
-.LRemainAlphaNotOpaqueOrZero1:
-    movdqa      (%rdx, %rdi), %xmm5     // Load four destination pixels
-    EXTRACT_ALPHA(xmm1, xmm2)           // Extract and clone alpha value
-    SCALE_PIXELS                        // Scale pixels using alpha
-
-    subl        $4, %ecx
-    pblendvb    %xmm0, %xmm5, %xmm3     // Combine results
-    paddb       %xmm3, %xmm1            // Add source and destination pixels together
-    jle         .LRemainStore
-    movdqa      %xmm1, (%rdx, %rdi)     // Store four destination pixels
-    addq        $16, %rdi
-    jmp         .LRemainLoop1
-
-    // Store the last 1-4 pixels
-    .p2align 4
-.LRemainStore:
-    jz          .LRemainFull
-    movdqa      (%rdx, %rdi), %xmm5     // Load four destination pixels
-    cmpl        $-2, %ecx               // Check how many pixels should be written
-    jb          .LRemainPixelsLeft11
-    ja          .LRemainPixelsLeft13
-    pblendw     $0x0F, %xmm1, %xmm5
-    movdqa      %xmm5, (%rdx, %rdi)     // Store last 2 destination pixels
-.LExit:
-    ret
-
-.LRemainPixelsLeft11:
-    pblendw     $0x03, %xmm1, %xmm5
-    movdqa      %xmm5, (%rdx, %rdi)     // Store last destination pixel
-    ret
-
-.LRemainPixelsLeft13:
-    pblendw     $0x3F, %xmm1, %xmm5
-    movdqa      %xmm5, (%rdx, %rdi)     // Store last 3 destination pixels
-    ret
-
-.LRemainFull:
-    movdqa      %xmm1, (%rdx, %rdi)     // Store last 4 destination pixels
-    ret
-
-    .cfi_endproc
-#ifndef __clang__
-    .size S32A_Opaque_BlitRow32_SSE4_asm, .-S32A_Opaque_BlitRow32_SSE4_asm
-#endif
-
-    // Constants for SSE code
-    .pushsection .rodata
-    .p2align 4
-.LAlphaCheckMask:
-    .long   0xFF000000, 0xFF000000, 0xFF000000, 0xFF000000
-.LInverseAlphaCalc:
-    .word   256, 256, 256, 256, 256, 256, 256, 256
-.LResultMergeMask:
-    .long   0x00FF00FF, 0x00FF00FF, 0x00FF00FF, 0x00FF00FF
-    .popsection
-#endif