[M60] exo: Send DSF of internal display to ARC

third_party/wayland-protocols/include/protocol/remote-shell-unstable-v1-server-protocol.h

 /* Generated by wayland-scanner 1.12.90 */
 
 #ifndef REMOTE_SHELL_UNSTABLE_V1_SERVER_PROTOCOL_H
 #define REMOTE_SHELL_UNSTABLE_V1_SERVER_PROTOCOL_H
 
 #include <stdint.h>
 #include <stddef.h>
 #include "wayland-server.h"
 
 #ifdef  __cplusplus
@@ skipping 322 matching lines @@
 static inline void
 zcr_remote_shell_v1_send_configuration_changed(struct wl_resource *resource_, int32_t width, int32_t height, int32_t transform, wl_fixed_t scale_factor, int32_t work_area_inset_left, int32_t work_area_inset_top, int32_t work_area_inset_right, int32_t work_area_inset_bottom, uint32_t layout_mode)
 {
         wl_resource_post_event(resource_, ZCR_REMOTE_SHELL_V1_CONFIGURATION_CHANGED, width, height, transform, scale_factor, work_area_inset_left, work_area_inset_top, work_area_inset_right, work_area_inset_bottom, layout_mode);
 }
 
 /**
  * @ingroup iface_zcr_remote_shell_v1
  * Sends an workspace event to the client owning the resource.
  * @param resource_ The client's resource
+ * @param is_internal 1 if screen is built-in
  */
 static inline void
-zcr_remote_shell_v1_send_workspace(struct wl_resource *resource_, uint32_t id_hi, uint32_t id_lo, int32_t x, int32_t y, int32_t width, int32_t height, int32_t inset_left, int32_t inset_top, int32_t inset_right, int32_t inset_bottom, int32_t transform, wl_fixed_t scale_factor)
+zcr_remote_shell_v1_send_workspace(struct wl_resource *resource_, uint32_t id_hi, uint32_t id_lo, int32_t x, int32_t y, int32_t width, int32_t height, int32_t inset_left, int32_t inset_top, int32_t inset_right, int32_t inset_bottom, int32_t transform, wl_fixed_t scale_factor, uint32_t is_internal)
 {
-        wl_resource_post_event(resource_, ZCR_REMOTE_SHELL_V1_WORKSPACE, id_hi, id_lo, x, y, width, height, inset_left, inset_top, inset_right, inset_bottom, transform, scale_factor);
+        wl_resource_post_event(resource_, ZCR_REMOTE_SHELL_V1_WORKSPACE, id_hi, id_lo, x, y, width, height, inset_left, inset_top, inset_right, inset_bottom, transform, scale_factor, is_internal);
 }
 
 /**
  * @ingroup iface_zcr_remote_shell_v1
  * Sends an configure event to the client owning the resource.
  * @param resource_ The client's resource
  */
 static inline void
 zcr_remote_shell_v1_send_configure(struct wl_resource *resource_, uint32_t layout_mode)
 {
         wl_resource_post_event(resource_, ZCR_REMOTE_SHELL_V1_CONFIGURE, layout_mode);
 }
 
 #ifndef ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM
 #define ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM
 /**
  * @ingroup iface_zcr_remote_surface_v1
  * systemui visibility behavior
  *
  * Determine the visibility behavior of the system UI.
  */
 enum zcr_remote_surface_v1_systemui_visibility_state {
-  /**
-   * system ui is visible
-   */
-  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_VISIBLE = 1,
-  /**
-   * system ui autohides and is not sticky
-   */
-  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_NON_STICKY = 2,
-  /**
-   * system ui autohides and is sticky
-   */
-  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_STICKY = 3,
+        /**
+         * system ui is visible
+         */
+        ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_VISIBLE = 1,
+        /**
+         * system ui autohides and is not sticky
+         */
+        ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_NON_STICKY = 2,
+        /**
+         * system ui autohides and is sticky
+         */
+        ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_STICKY = 3,
 };
 #endif /* ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM */
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  * @struct zcr_remote_surface_v1_interface
  */
 struct zcr_remote_surface_v1_interface {
         /**
          * Destroy the remote_surface
@@ skipping 232 matching lines @@
          * and specifies inner bounds of the shadow. Specifying zero width
          * and height will disable the shadow.
          * @since 2
          */
         void (*set_rectangular_surface_shadow)(struct wl_client *client,
                                                struct wl_resource *resource,
                                                int32_t x,
                                                int32_t y,
                                                int32_t width,
                                                int32_t height);
-        /**
-         * requests the system ui visibility behavior for the surface
-         *
-         * Requests how the surface will change the visibility of the
-         * system UI when it is made active.
-         * @since 3
-         */
-        void (*set_systemui_visibility)(struct wl_client* client,
-                                        struct wl_resource* resource,
-                                        uint32_t visibility);
-        /**
-         * set always on top
-         *
-         * Request that surface is made to be always on top.
-         *
-         * This is only a request that the window should be always on top.
-         * The compositor may choose to ignore this request.
-         * @since 4
-         */
-        void (*set_always_on_top)(struct wl_client* client,
-                                  struct wl_resource* resource);
-        /**
-         * unset always on top
-         *
-         * Request that surface is made to be not always on top.
-         *
-         * This is only a request that the window should be not always on
-         * top. The compositor may choose to ignore this request.
-         * @since 4
-         */
-        void (*unset_always_on_top)(struct wl_client* client,
-                                    struct wl_resource* resource);
-        /**
-         * ack a configure event
-         *
-         * When a configure event is received, if a client commits the
-         * surface in response to the configure event, then the client must
-         * make an ack_configure request sometime before the commit
-         * request, passing along the serial of the configure event.
-         *
-         * For instance, the compositor might use this information during
-         * display configuration to change its coordinate space for
-         * set_window_geometry requests only when the client has switched
-         * to the new coordinate space.
-         *
-         * If the client receives multiple configure events before it can
-         * respond to one, it only has to ack the last configure event.
-         *
-         * A client is not required to commit immediately after sending an
-         * ack_configure request - it may even ack_configure several times
-         * before its next surface commit.
-         *
-         * A client may send multiple ack_configure requests before
-         * committing, but only the last request sent before a commit
-         * indicates which configure event the client really is responding
-         * to.
-         * @param serial the serial from the configure event
-         * @since 5
-         */
-        void (*ack_configure)(struct wl_client* client,
-                              struct wl_resource* resource,
-                              uint32_t serial);
-        /**
-         * start an interactive move
-         *
-         * Start an interactive, user-driven move of the surface.
-         *
-         * The compositor responds to this request with a configure event
-         * that transitions to the "moving" state. The client must only
-         * initiate motion after acknowledging the state change. The
-         * compositor can assume that subsequent set_window_geometry
-         * requests are position updates until the next state transition is
-         * acknowledged.
-         *
-         * The compositor may ignore move requests depending on the state
-         * of the surface, e.g. fullscreen or maximized.
-         * @since 5
-         */
-        void (*move)(struct wl_client* client, struct wl_resource* resource);
+        /**
+         * requests the system ui visibility behavior for the surface
+         *
+         * Requests how the surface will change the visibility of the
+         * system UI when it is made active.
+         * @since 3
+         */
+        void (*set_systemui_visibility)(struct wl_client *client,
+                                        struct wl_resource *resource,
+                                        uint32_t visibility);
+        /**
+         * set always on top
+         *
+         * Request that surface is made to be always on top.
+         *
+         * This is only a request that the window should be always on top.
+         * The compositor may choose to ignore this request.
+         * @since 4
+         */
+        void (*set_always_on_top)(struct wl_client *client,
+                                  struct wl_resource *resource);
+        /**
+         * unset always on top
+         *
+         * Request that surface is made to be not always on top.
+         *
+         * This is only a request that the window should be not always on
+         * top. The compositor may choose to ignore this request.
+         * @since 4
+         */
+        void (*unset_always_on_top)(struct wl_client *client,
+                                    struct wl_resource *resource);
+        /**
+         * ack a configure event
+         *
+         * When a configure event is received, if a client commits the
+         * surface in response to the configure event, then the client must
+         * make an ack_configure request sometime before the commit
+         * request, passing along the serial of the configure event.
+         *
+         * For instance, the compositor might use this information during
+         * display configuration to change its coordinate space for
+         * set_window_geometry requests only when the client has switched
+         * to the new coordinate space.
+         *
+         * If the client receives multiple configure events before it can
+         * respond to one, it only has to ack the last configure event.
+         *
+         * A client is not required to commit immediately after sending an
+         * ack_configure request - it may even ack_configure several times
+         * before its next surface commit.
+         *
+         * A client may send multiple ack_configure requests before
+         * committing, but only the last request sent before a commit
+         * indicates which configure event the client really is responding
+         * to.
+         * @param serial the serial from the configure event
+         * @since 5
+         */
+        void (*ack_configure)(struct wl_client *client,
+                              struct wl_resource *resource,
+                              uint32_t serial);
+        /**
+         * start an interactive move
+         *
+         * Start an interactive, user-driven move of the surface.
+         *
+         * The compositor responds to this request with a configure event
+         * that transitions to the "moving" state. The client must only
+         * initiate motion after acknowledging the state change. The
+         * compositor can assume that subsequent set_window_geometry
+         * requests are position updates until the next state transition is
+         * acknowledged.
+         *
+         * The compositor may ignore move requests depending on the state
+         * of the surface, e.g. fullscreen or maximized.
+         * @since 5
+         */
+        void (*move)(struct wl_client *client,
+                     struct wl_resource *resource);
 };
 
 #define ZCR_REMOTE_SURFACE_V1_CLOSE 0
 #define ZCR_REMOTE_SURFACE_V1_STATE_TYPE_CHANGED 1
 #define ZCR_REMOTE_SURFACE_V1_CONFIGURE 2
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
 #define ZCR_REMOTE_SURFACE_V1_CLOSE_SINCE_VERSION 1
@@ skipping 154 matching lines @@
 /**
  * @ingroup iface_zcr_notification_surface_v1
  */
 #define ZCR_NOTIFICATION_SURFACE_V1_DESTROY_SINCE_VERSION 1
 
 #ifdef  __cplusplus
 }
 #endif
 
 #endif