[M60] exo: Send DSF of internal display to ARC

third_party/wayland-protocols/include/protocol/remote-shell-unstable-v1-client-protocol.h

 /* Generated by wayland-scanner 1.12.90 */
 
 #ifndef REMOTE_SHELL_UNSTABLE_V1_CLIENT_PROTOCOL_H
 #define REMOTE_SHELL_UNSTABLE_V1_CLIENT_PROTOCOL_H
 
 #include <stdint.h>
 #include <stddef.h>
 #include "wayland-client.h"
 
 #ifdef  __cplusplus
@@ skipping 241 matching lines @@
                                       struct zcr_remote_shell_v1 *zcr_remote_shell_v1,
                                       int32_t width,
                                       int32_t height,
                                       int32_t transform,
                                       wl_fixed_t scale_factor,
                                       int32_t work_area_inset_left,
                                       int32_t work_area_inset_top,
                                       int32_t work_area_inset_right,
                                       int32_t work_area_inset_bottom,
                                       uint32_t layout_mode);
-        /**
-         * area of remote shell
-         *
-         * Defines an area of the remote shell used for layout. Each
-         * series of "workspace" events must be terminated by a "configure"
-         * event.
-         * @since 5
-         */
-        void (*workspace)(void *data,
+        /**
+         * area of remote shell
+         *
+         * Defines an area of the remote shell used for layout. Each
+         * series of "workspace" events must be terminated by a "configure"
+         * event.
+         * @param is_internal 1 if screen is built-in
+         * @since 5
+         */
+        void (*workspace)(void *data,
                           struct zcr_remote_shell_v1 *zcr_remote_shell_v1,
                           uint32_t id_hi,
                           uint32_t id_lo,
                           int32_t x,
                           int32_t y,
                           int32_t width,
                           int32_t height,
                           int32_t inset_left,
                           int32_t inset_top,
                           int32_t inset_right,
                           int32_t inset_bottom,
                           int32_t transform,
-                          wl_fixed_t scale_factor);
-        /**
-         * suggests configuration of remote shell
-         *
-         * Suggests a new configuration of the remote shell. Preceded by
-         * a series of "workspace" events.
-         * @since 5
-         */
-        void (*configure)(void *data,
+                          wl_fixed_t scale_factor,
+                          uint32_t is_internal);
+        /**
+         * suggests configuration of remote shell
+         *
+         * Suggests a new configuration of the remote shell. Preceded by
+         * a series of "workspace" events.
+         * @since 5
+         */
+        void (*configure)(void *data,
                           struct zcr_remote_shell_v1 *zcr_remote_shell_v1,
                           uint32_t layout_mode);
 };
 
 /**
  * @ingroup iface_zcr_remote_shell_v1
  */
 static inline int
 zcr_remote_shell_v1_add_listener(struct zcr_remote_shell_v1 *zcr_remote_shell_v1,
                                  const struct zcr_remote_shell_v1_listener *listener, void *data)
@@ skipping 116 matching lines @@
 
 #ifndef ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM
 #define ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM
 /**
  * @ingroup iface_zcr_remote_surface_v1
  * systemui visibility behavior
  *
  * Determine the visibility behavior of the system UI.
  */
 enum zcr_remote_surface_v1_systemui_visibility_state {
-  /**
-   * system ui is visible
-   */
-  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_VISIBLE = 1,
-  /**
-   * system ui autohides and is not sticky
-   */
-  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_NON_STICKY = 2,
-  /**
-   * system ui autohides and is sticky
-   */
-  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_STICKY = 3,
+        /**
+         * system ui is visible
+         */
+        ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_VISIBLE = 1,
+        /**
+         * system ui autohides and is not sticky
+         */
+        ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_NON_STICKY = 2,
+        /**
+         * system ui autohides and is sticky
+         */
+        ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_STICKY = 3,
 };
 #endif /* ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM */
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  * @struct zcr_remote_surface_v1_listener
  */
 struct zcr_remote_surface_v1_listener {
         /**
          * surface wants to be closed
@@ skipping 16 matching lines @@
          * compositor when the surface state changed.
          *
          * This is an event to notify that the window state changed in
          * compositor. The state change may be triggered by a client's
          * request, or some user action directly handled by the compositor.
          * The client may choose to ignore this event.
          */
         void (*state_type_changed)(void *data,
                                    struct zcr_remote_surface_v1 *zcr_remote_surface_v1,
                                    uint32_t state_type);
-        /**
-         * suggest a surface change
-         *
-         * The configure event asks the client to change surface state.
-         *
-         * The client must apply the origin offset to window positions in
-         * set_window_geometry requests.
-         *
-         * The states listed in the event are state_type values, and might
-         * change due to a client request or an event directly handled by
-         * the compositor.
-         *
-         * Clients should arrange their surface for the new state, and then
-         * send an ack_configure request with the serial sent in this
-         * configure event at some point before committing the new surface.
-         *
-         * If the client receives multiple configure events before it can
-         * respond to one, it is free to discard all but the last event it
-         * received.
-         * @since 5
-         */
-        void (*configure)(void *data,
+        /**
+         * suggest a surface change
+         *
+         * The configure event asks the client to change surface state.
+         *
+         * The client must apply the origin offset to window positions in
+         * set_window_geometry requests.
+         *
+         * The states listed in the event are state_type values, and might
+         * change due to a client request or an event directly handled by
+         * the compositor.
+         *
+         * Clients should arrange their surface for the new state, and then
+         * send an ack_configure request with the serial sent in this
+         * configure event at some point before committing the new surface.
+         *
+         * If the client receives multiple configure events before it can
+         * respond to one, it is free to discard all but the last event it
+         * received.
+         * @since 5
+         */
+        void (*configure)(void *data,
                           struct zcr_remote_surface_v1 *zcr_remote_surface_v1,
                           int32_t origin_offset_x,
                           int32_t origin_offset_y,
                           struct wl_array *states,
                           uint32_t serial);
 };
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
@@ skipping 468 matching lines @@
 static inline void
 zcr_remote_surface_v1_set_rectangular_surface_shadow(struct zcr_remote_surface_v1 *zcr_remote_surface_v1, int32_t x, int32_t y, int32_t width, int32_t height)
 {
         wl_proxy_marshal((struct wl_proxy *) zcr_remote_surface_v1,
                          ZCR_REMOTE_SURFACE_V1_SET_RECTANGULAR_SURFACE_SHADOW, x, y, width, height);
 }
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  *
- * Requests how the surface will change the visibility of the system UI when it
- * is made active.
+ * Requests how the surface will change the visibility of the system UI when it is made active.
  */
-static inline void zcr_remote_surface_v1_set_systemui_visibility(
-    struct zcr_remote_surface_v1* zcr_remote_surface_v1,
-    uint32_t visibility) {
-  wl_proxy_marshal((struct wl_proxy*)zcr_remote_surface_v1,
-                   ZCR_REMOTE_SURFACE_V1_SET_SYSTEMUI_VISIBILITY, visibility);
+static inline void
+zcr_remote_surface_v1_set_systemui_visibility(struct zcr_remote_surface_v1 *zcr_remote_surface_v1, uint32_t visibility)
+{
+        wl_proxy_marshal((struct wl_proxy *) zcr_remote_surface_v1,
+                         ZCR_REMOTE_SURFACE_V1_SET_SYSTEMUI_VISIBILITY, visibility);
 }
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  *
  * Request that surface is made to be always on top.
  *
  * This is only a request that the window should be always on top.
  * The compositor may choose to ignore this request.
  *
  */
-static inline void zcr_remote_surface_v1_set_always_on_top(
-    struct zcr_remote_surface_v1* zcr_remote_surface_v1) {
-  wl_proxy_marshal((struct wl_proxy*)zcr_remote_surface_v1,
-                   ZCR_REMOTE_SURFACE_V1_SET_ALWAYS_ON_TOP);
+static inline void
+zcr_remote_surface_v1_set_always_on_top(struct zcr_remote_surface_v1 *zcr_remote_surface_v1)
+{
+        wl_proxy_marshal((struct wl_proxy *) zcr_remote_surface_v1,
+                         ZCR_REMOTE_SURFACE_V1_SET_ALWAYS_ON_TOP);
 }
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  *
  * Request that surface is made to be not always on top.
  *
  * This is only a request that the window should be not always on top.
  * The compositor may choose to ignore this request.
  */
-static inline void zcr_remote_surface_v1_unset_always_on_top(
-    struct zcr_remote_surface_v1* zcr_remote_surface_v1) {
-  wl_proxy_marshal((struct wl_proxy*)zcr_remote_surface_v1,
-                   ZCR_REMOTE_SURFACE_V1_UNSET_ALWAYS_ON_TOP);
+static inline void
+zcr_remote_surface_v1_unset_always_on_top(struct zcr_remote_surface_v1 *zcr_remote_surface_v1)
+{
+        wl_proxy_marshal((struct wl_proxy *) zcr_remote_surface_v1,
+                         ZCR_REMOTE_SURFACE_V1_UNSET_ALWAYS_ON_TOP);
 }
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  *
  * When a configure event is received, if a client commits the
  * surface in response to the configure event, then the client
  * must make an ack_configure request sometime before the commit
  * request, passing along the serial of the configure event.
  *
@@ skipping 80 matching lines @@
                          ZCR_NOTIFICATION_SURFACE_V1_DESTROY);
 
         wl_proxy_destroy((struct wl_proxy *) zcr_notification_surface_v1);
 }
 
 #ifdef  __cplusplus
 }
 #endif
 
 #endif