Add an unpatched version of xz, XZ Utils, to /trunk/deps/third_party

xz/src/liblzma/api/lzma/container.h

Index: xz/src/liblzma/api/lzma/container.h
===================================================================
--- xz/src/liblzma/api/lzma/container.h	(revision 0)
+++ xz/src/liblzma/api/lzma/container.h	(revision 0)
@@ -0,0 +1,404 @@
+/**
+ * \file        lzma/container.h
+ * \brief       File formats
+ */
+
+/*
+ * Author: Lasse Collin
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ *
+ * See ../lzma.h for information about liblzma as a whole.
+ */
+
+#ifndef LZMA_H_INTERNAL
+#	error Never include this file directly. Use <lzma.h> instead.
+#endif
+
+
+/************
+ * Encoding *
+ ************/
+
+/**
+ * \brief       Default compression preset
+ *
+ * It's not straightforward to recommend a default preset, because in some
+ * cases keeping the resource usage relatively low is more important that
+ * getting the maximum compression ratio.
+ */
+#define LZMA_PRESET_DEFAULT     UINT32_C(6)
+
+
+/**
+ * \brief       Mask for preset level
+ *
+ * This is useful only if you need to extract the level from the preset
+ * variable. That should be rare.
+ */
+#define LZMA_PRESET_LEVEL_MASK  UINT32_C(0x1F)
+
+
+/*
+ * Preset flags
+ *
+ * Currently only one flag is defined.
+ */
+
+/**
+ * \brief       Extreme compression preset
+ *
+ * This flag modifies the preset to make the encoding significantly slower
+ * while improving the compression ratio only marginally. This is useful
+ * when you don't mind wasting time to get as small result as possible.
+ *
+ * This flag doesn't affect the memory usage requirements of the decoder (at
+ * least not significantly). The memory usage of the encoder may be increased
+ * a little but only at the lowest preset levels (0-2).
+ */
+#define LZMA_PRESET_EXTREME       (UINT32_C(1) << 31)
+
+
+/**
+ * \brief       Calculate rough memory usage of easy encoder
+ *
+ * This function is a wrapper for lzma_raw_encoder_memusage().
+ *
+ * \param       preset  Compression preset (level and possible flags)
+ */
+extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Calculate rough decoder memory usage of a preset
+ *
+ * This function is a wrapper for lzma_raw_decoder_memusage().
+ *
+ * \param       preset  Compression preset (level and possible flags)
+ */
+extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset)
+		lzma_nothrow lzma_attr_pure;
+
+
+/**
+ * \brief       Initialize .xz Stream encoder using a preset number
+ *
+ * This function is intended for those who just want to use the basic features
+ * if liblzma (that is, most developers out there).
+ *
+ * \param       strm    Pointer to lzma_stream that is at least initialized
+ *                      with LZMA_STREAM_INIT.
+ * \param       preset  Compression preset to use. A preset consist of level
+ *                      number and zero or more flags. Usually flags aren't
+ *                      used, so preset is simply a number [0, 9] which match
+ *                      the options -0 .. -9 of the xz command line tool.
+ *                      Additional flags can be be set using bitwise-or with
+ *                      the preset level number, e.g. 6 | LZMA_PRESET_EXTREME.
+ * \param       check   Integrity check type to use. See check.h for available
+ *                      checks. If you are unsure, use LZMA_CHECK_CRC32.
+ *
+ * \return      - LZMA_OK: Initialization succeeded. Use lzma_code() to
+ *                encode your data.
+ *              - LZMA_MEM_ERROR: Memory allocation failed.
+ *              - LZMA_OPTIONS_ERROR: The given compression level is not
+ *                supported by this build of liblzma.
+ *              - LZMA_UNSUPPORTED_CHECK: The given check type is not
+ *                supported by this liblzma build.
+ *              - LZMA_PROG_ERROR: One or more of the parameters have values
+ *                that will never be valid. For example, strm == NULL.
+ *
+ * If initialization fails (return value is not LZMA_OK), all the memory
+ * allocated for *strm by liblzma is always freed. Thus, there is no need
+ * to call lzma_end() after failed initialization.
+ *
+ * If initialization succeeds, use lzma_code() to do the actual encoding.
+ * Valid values for `action' (the second argument of lzma_code()) are
+ * LZMA_RUN, LZMA_SYNC_FLUSH, LZMA_FULL_FLUSH, and LZMA_FINISH. In future,
+ * there may be compression levels or flags that don't support LZMA_SYNC_FLUSH.
+ */
+extern LZMA_API(lzma_ret) lzma_easy_encoder(
+		lzma_stream *strm, uint32_t preset, lzma_check check)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call .xz Stream encoding using a preset number
+ *
+ * The maximum required output buffer size can be calculated with
+ * lzma_stream_buffer_bound().
+ *
+ * \param       preset      Compression preset to use. See the description
+ *                          in lzma_easy_encoder().
+ * \param       check       Type of the integrity check to calculate from
+ *                          uncompressed data.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_easy_buffer_encode(
+		uint32_t preset, lzma_check check,
+		lzma_allocator *allocator, const uint8_t *in, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow;
+
+
+/**
+ * \brief       Initialize .xz Stream encoder using a custom filter chain
+ *
+ * \param       strm    Pointer to properly prepared lzma_stream
+ * \param       filters Array of filters. This must be terminated with
+ *                      filters[n].id = LZMA_VLI_UNKNOWN. See filter.h for
+ *                      more information.
+ * \param       check   Type of the integrity check to calculate from
+ *                      uncompressed data.
+ *
+ * \return      - LZMA_OK: Initialization was successful.
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_stream_encoder(lzma_stream *strm,
+		const lzma_filter *filters, lzma_check check)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .lzma encoder (legacy file format)
+ *
+ * The .lzma format is sometimes called the LZMA_Alone format, which is the
+ * reason for the name of this function. The .lzma format supports only the
+ * LZMA1 filter. There is no support for integrity checks like CRC32.
+ *
+ * Use this function if and only if you need to create files readable by
+ * legacy LZMA tools such as LZMA Utils 4.32.x. Moving to the .xz format
+ * is strongly recommended.
+ *
+ * The valid action values for lzma_code() are LZMA_RUN and LZMA_FINISH.
+ * No kind of flushing is supported, because the file format doesn't make
+ * it possible.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_alone_encoder(
+		lzma_stream *strm, const lzma_options_lzma *options)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Calculate output buffer size for single-call Stream encoder
+ *
+ * When trying to compress uncompressible data, the encoded size will be
+ * slightly bigger than the input data. This function calculates how much
+ * output buffer space is required to be sure that lzma_stream_buffer_encode()
+ * doesn't return LZMA_BUF_ERROR.
+ *
+ * The calculated value is not exact, but it is guaranteed to be big enough.
+ * The actual maximum output space required may be slightly smaller (up to
+ * about 100 bytes). This should not be a problem in practice.
+ *
+ * If the calculated maximum size doesn't fit into size_t or would make the
+ * Stream grow past LZMA_VLI_MAX (which should never happen in practice),
+ * zero is returned to indicate the error.
+ *
+ * \note        The limit calculated by this function applies only to
+ *              single-call encoding. Multi-call encoding may (and probably
+ *              will) have larger maximum expansion when encoding
+ *              uncompressible data. Currently there is no function to
+ *              calculate the maximum expansion of multi-call encoding.
+ */
+extern LZMA_API(size_t) lzma_stream_buffer_bound(size_t uncompressed_size)
+		lzma_nothrow;
+
+
+/**
+ * \brief       Single-call .xz Stream encoder
+ *
+ * \param       filters     Array of filters. This must be terminated with
+ *                          filters[n].id = LZMA_VLI_UNKNOWN. See filter.h
+ *                          for more information.
+ * \param       check       Type of the integrity check to calculate from
+ *                          uncompressed data.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_size     Size of the input buffer
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Encoding was successful.
+ *              - LZMA_BUF_ERROR: Not enough output buffer space.
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_stream_buffer_encode(
+		lzma_filter *filters, lzma_check check,
+		lzma_allocator *allocator, const uint8_t *in, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/************
+ * Decoding *
+ ************/
+
+/**
+ * This flag makes lzma_code() return LZMA_NO_CHECK if the input stream
+ * being decoded has no integrity check. Note that when used with
+ * lzma_auto_decoder(), all .lzma files will trigger LZMA_NO_CHECK
+ * if LZMA_TELL_NO_CHECK is used.
+ */
+#define LZMA_TELL_NO_CHECK              UINT32_C(0x01)
+
+
+/**
+ * This flag makes lzma_code() return LZMA_UNSUPPORTED_CHECK if the input
+ * stream has an integrity check, but the type of the integrity check is not
+ * supported by this liblzma version or build. Such files can still be
+ * decoded, but the integrity check cannot be verified.
+ */
+#define LZMA_TELL_UNSUPPORTED_CHECK     UINT32_C(0x02)
+
+
+/**
+ * This flag makes lzma_code() return LZMA_GET_CHECK as soon as the type
+ * of the integrity check is known. The type can then be got with
+ * lzma_get_check().
+ */
+#define LZMA_TELL_ANY_CHECK             UINT32_C(0x04)
+
+
+/**
+ * This flag enables decoding of concatenated files with file formats that
+ * allow concatenating compressed files as is. From the formats currently
+ * supported by liblzma, only the .xz format allows concatenated files.
+ * Concatenated files are not allowed with the legacy .lzma format.
+ *
+ * This flag also affects the usage of the `action' argument for lzma_code().
+ * When LZMA_CONCATENATED is used, lzma_code() won't return LZMA_STREAM_END
+ * unless LZMA_FINISH is used as `action'. Thus, the application has to set
+ * LZMA_FINISH in the same way as it does when encoding.
+ *
+ * If LZMA_CONCATENATED is not used, the decoders still accept LZMA_FINISH
+ * as `action' for lzma_code(), but the usage of LZMA_FINISH isn't required.
+ */
+#define LZMA_CONCATENATED               UINT32_C(0x08)
+
+
+/**
+ * \brief       Initialize .xz Stream decoder
+ *
+ * \param       strm        Pointer to properly prepared lzma_stream
+ * \param       memlimit    Rough memory usage limit as bytes
+ * \param       flags       Bitwise-or of zero or more of the decoder flags:
+ *                          LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK,
+ *                          LZMA_TELL_ANY_CHECK, LZMA_CONCATENATED
+ *
+ * \return      - LZMA_OK: Initialization was successful.
+ *              - LZMA_MEM_ERROR: Cannot allocate memory.
+ *              - LZMA_OPTIONS_ERROR: Unsupported flags
+ */
+extern LZMA_API(lzma_ret) lzma_stream_decoder(
+		lzma_stream *strm, uint64_t memlimit, uint32_t flags)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Decode .xz Streams and .lzma files with autodetection
+ *
+ * This decoder autodetects between the .xz and .lzma file formats, and
+ * calls lzma_stream_decoder() or lzma_alone_decoder() once the type
+ * of the input file has been detected.
+ *
+ * \param       strm        Pointer to properly prepared lzma_stream
+ * \param       memlimit    Rough memory usage limit as bytes
+ * \param       flags       Bitwise-or of flags, or zero for no flags.
+ *
+ * \return      - LZMA_OK: Initialization was successful.
+ *              - LZMA_MEM_ERROR: Cannot allocate memory.
+ *              - LZMA_OPTIONS_ERROR: Unsupported flags
+ */
+extern LZMA_API(lzma_ret) lzma_auto_decoder(
+		lzma_stream *strm, uint64_t memlimit, uint32_t flags)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Initialize .lzma decoder (legacy file format)
+ *
+ * Valid `action' arguments to lzma_code() are LZMA_RUN and LZMA_FINISH.
+ * There is no need to use LZMA_FINISH, but allowing it may simplify
+ * certain types of applications.
+ *
+ * \return      - LZMA_OK
+ *              - LZMA_MEM_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_alone_decoder(
+		lzma_stream *strm, uint64_t memlimit)
+		lzma_nothrow lzma_attr_warn_unused_result;
+
+
+/**
+ * \brief       Single-call .xz Stream decoder
+ *
+ * \param       memlimit    Pointer to how much memory the decoder is allowed
+ *                          to allocate. The value pointed by this pointer is
+ *                          modified if and only if LZMA_MEMLIMIT_ERROR is
+ *                          returned.
+ * \param       flags       Bitwise-or of zero or more of the decoder flags:
+ *                          LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK,
+ *                          LZMA_CONCATENATED. Note that LZMA_TELL_ANY_CHECK
+ *                          is not allowed and will return LZMA_PROG_ERROR.
+ * \param       allocator   lzma_allocator for custom allocator functions.
+ *                          Set to NULL to use malloc() and free().
+ * \param       in          Beginning of the input buffer
+ * \param       in_pos      The next byte will be read from in[*in_pos].
+ *                          *in_pos is updated only if decoding succeeds.
+ * \param       in_size     Size of the input buffer; the first byte that
+ *                          won't be read is in[in_size].
+ * \param       out         Beginning of the output buffer
+ * \param       out_pos     The next byte will be written to out[*out_pos].
+ *                          *out_pos is updated only if encoding succeeds.
+ * \param       out_size    Size of the out buffer; the first byte into
+ *                          which no data is written to is out[out_size].
+ *
+ * \return      - LZMA_OK: Decoding was successful.
+ *              - LZMA_FORMAT_ERROR
+ *              - LZMA_OPTIONS_ERROR
+ *              - LZMA_DATA_ERROR
+ *              - LZMA_NO_CHECK: This can be returned only if using
+ *                the LZMA_TELL_NO_CHECK flag.
+ *              - LZMA_UNSUPPORTED_CHECK: This can be returned only if using
+ *                the LZMA_TELL_UNSUPPORTED_CHECK flag.
+ *              - LZMA_MEM_ERROR
+ *              - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached.
+ *                The minimum required memlimit value was stored to *memlimit.
+ *              - LZMA_BUF_ERROR: Output buffer was too small.
+ *              - LZMA_PROG_ERROR
+ */
+extern LZMA_API(lzma_ret) lzma_stream_buffer_decode(
+		uint64_t *memlimit, uint32_t flags, lzma_allocator *allocator,
+		const uint8_t *in, size_t *in_pos, size_t in_size,
+		uint8_t *out, size_t *out_pos, size_t out_size)
+		lzma_nothrow lzma_attr_warn_unused_result;
Property changes on: xz/src/liblzma/api/lzma/container.h
___________________________________________________________________
Added: svn:eol-style
   + LF