third_party/libxslt/libexslt/Makefile.in - Issue 2865973002: Check in the libxslt roll script.

Unified Diff: third_party/libxslt/libexslt/Makefile.in

Issue 2865973002: Check in the libxslt roll script. (Closed)

Patch Set: Consistent quotes. Created 3 years, 7 months ago

Use n/p to move between diff chunks; N/P to move between comments. Draft comments are only viewable by you.

Jump to:

View side-by-side diff with in-line comments

Index: third_party/libxslt/libexslt/Makefile.in

diff --git a/third_party/libxslt/libexslt/Makefile.in b/third_party/libxslt/libexslt/Makefile.in

deleted file mode 100644

index 41b0cc43d3fedab5e78d0be0bd682fde98bd96a3..0000000000000000000000000000000000000000

--- a/third_party/libxslt/libexslt/Makefile.in

+++ /dev/null

@@ -1,832 +0,0 @@

-# Makefile.in generated by automake 1.14.1 from Makefile.am.

-# @configure_input@

-# This Makefile.in is free software; the Free Software Foundation

-# gives unlimited permission to copy and/or distribute it,

-# with or without modifications, as long as this notice is preserved.

-# This program is distributed in the hope that it will be useful,

-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

-# PARTICULAR PURPOSE.

-@SET_MAKE@

-VPATH = @srcdir@

-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'

-am__make_running_with_option = \

- case $${target_option-} in \

- ?) ;; \

- *) echo "am__make_running_with_option: internal error: invalid" \

- "target option '$${target_option-}' specified" >&2; \

- exit 1;; \

- esac; \

- has_opt=no; \

- sane_makeflags=$$MAKEFLAGS; \

- if $(am__is_gnu_make); then \

- sane_makeflags=$$MFLAGS; \

- else \

- case $$MAKEFLAGS in \

- *\\[\ \ ]*) \

- bs=\\; \

- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \

- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \

- esac; \

- fi; \

- skip_next=no; \

- strip_trailopt () \

- { \

- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \

- }; \

- for flg in $$sane_makeflags; do \

- test $$skip_next = yes && { skip_next=no; continue; }; \

- case $$flg in \

- *=*|--*) continue;; \

- -*I) strip_trailopt 'I'; skip_next=yes;; \

- -*I?*) strip_trailopt 'I';; \

- -*O) strip_trailopt 'O'; skip_next=yes;; \

- -*O?*) strip_trailopt 'O';; \

- -*l) strip_trailopt 'l'; skip_next=yes;; \

- -*l?*) strip_trailopt 'l';; \

- -[dEDm]) skip_next=yes;; \

- -[JT]) skip_next=yes;; \

- esac; \

- case $$flg in \

- *$$target_option*) has_opt=yes; break;; \

- esac; \

- done; \

- test $$has_opt = yes

-am__make_dryrun = (target_option=n; $(am__make_running_with_option))

-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))

-pkgdatadir = $(datadir)/@PACKAGE@

-pkgincludedir = $(includedir)/@PACKAGE@

-pkglibdir = $(libdir)/@PACKAGE@

-pkglibexecdir = $(libexecdir)/@PACKAGE@

-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

-install_sh_DATA = $(install_sh) -c -m 644

-install_sh_PROGRAM = $(install_sh) -c

-install_sh_SCRIPT = $(install_sh) -c

-INSTALL_HEADER = $(INSTALL_DATA)

-transform = $(program_transform_name)

-NORMAL_INSTALL = :

-PRE_INSTALL = :

-POST_INSTALL = :

-NORMAL_UNINSTALL = :

-PRE_UNINSTALL = :

-POST_UNINSTALL = :

-build_triplet = @build@

-host_triplet = @host@

-subdir = libexslt

-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \

- $(srcdir)/exsltconfig.h.in $(top_srcdir)/depcomp \

- $(exsltinc_HEADERS)

-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

-am__aclocal_m4_deps = $(top_srcdir)/configure.in

-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

- $(ACLOCAL_M4)

-mkinstalldirs = $(install_sh) -d

-CONFIG_HEADER = $(top_builddir)/config.h

-CONFIG_CLEAN_FILES = exsltconfig.h

-CONFIG_CLEAN_VPATH_FILES =

-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;

-am__vpath_adj = case $$p in \

- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \

- *) f=$$p;; \

- esac;

-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;

-am__install_max = 40

-am__nobase_strip_setup = \

- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`

-am__nobase_strip = \

- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"

-am__nobase_list = $(am__nobase_strip_setup); \

- for p in $$list; do echo "$$p $$p"; done | \

- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,$ .*$/[^/]*$$,\1,' | \

- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \

- if (++n[$$2] == $(am__install_max)) \

- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \

- END { for (dir in files) print dir, files[dir] }'

-am__base_list = \

- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \

- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'

-am__uninstall_files_from_dir = { \

- test -z "$$files" \

- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \

- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \

- $(am__cd) "$$dir" && rm -f $$files; }; \

- }

-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)" \

- "$(DESTDIR)$(exsltincdir)" "$(DESTDIR)$(exsltincdir)"

-LTLIBRARIES = $(lib_LTLIBRARIES)

-am__DEPENDENCIES_1 =

-libexslt_la_DEPENDENCIES = $(top_builddir)/libxslt/libxslt.la \

- $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \

- $(am__DEPENDENCIES_1)

-am_libexslt_la_OBJECTS = exslt.lo common.lo crypto.lo math.lo sets.lo \

- functions.lo strings.lo date.lo saxon.lo dynamic.lo

-libexslt_la_OBJECTS = $(am_libexslt_la_OBJECTS)

-AM_V_lt = $(am__v_lt_@AM_V@)

-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)

-am__v_lt_0 = --silent

-am__v_lt_1 =

-libexslt_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \

- $(libexslt_la_LDFLAGS) $(LDFLAGS) -o $@

-AM_V_P = $(am__v_P_@AM_V@)

-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)

-am__v_P_0 = false

-am__v_P_1 = :

-AM_V_GEN = $(am__v_GEN_@AM_V@)

-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)

-am__v_GEN_0 = @echo " GEN " $@;

-am__v_GEN_1 =

-AM_V_at = $(am__v_at_@AM_V@)

-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)

-am__v_at_0 = @

-am__v_at_1 =

-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)

-depcomp = $(SHELL) $(top_srcdir)/depcomp

-am__depfiles_maybe = depfiles

-am__mv = mv -f

-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \

- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

- $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \

- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \

- $(AM_CFLAGS) $(CFLAGS)

-AM_V_CC = $(am__v_CC_@AM_V@)

-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)

-am__v_CC_0 = @echo " CC " $@;

-am__v_CC_1 =

-CCLD = $(CC)

-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \

- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \

- $(AM_LDFLAGS) $(LDFLAGS) -o $@

-AM_V_CCLD = $(am__v_CCLD_@AM_V@)

-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)

-am__v_CCLD_0 = @echo " CCLD " $@;

-am__v_CCLD_1 =

-SOURCES = $(libexslt_la_SOURCES)

-DIST_SOURCES = $(libexslt_la_SOURCES)

-am__can_run_installinfo = \

- case $$AM_UPDATE_INFO_DIR in \

- n|no|NO) false;; \

- *) (install-info --version) >/dev/null 2>&1;; \

- esac

-man3dir = $(mandir)/man3

-NROFF = nroff

-MANS = $(man_MANS)

-HEADERS = $(exsltinc_HEADERS) $(nodist_exsltinc_HEADERS)

-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)

-# Read a list of newline-separated strings from the standard input,

-# and print each of them once, without duplicates. Input order is

-# *not* preserved.

-am__uniquify_input = $(AWK) '\

- BEGIN { nonempty = 0; } \

- { items[$$0] = 1; nonempty = 1; } \

- END { if (nonempty) { for (i in items) print i; }; } \

-# Make sure the list of sources is unique. This is necessary because,

-# e.g., the same source file might be shared among _SOURCES variables

-# for different programs/libraries.

-am__define_uniq_tagged_files = \

- list='$(am__tagged_files)'; \

- unique=`for i in $$list; do \

- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

- done | $(am__uniquify_input)`

-ETAGS = etags

-CTAGS = ctags

-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

-ACLOCAL = @ACLOCAL@

-AMTAR = @AMTAR@

-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@

-AR = @AR@

-AS = @AS@

-AUTOCONF = @AUTOCONF@

-AUTOHEADER = @AUTOHEADER@

-AUTOMAKE = @AUTOMAKE@

-AWK = @AWK@

-CC = @CC@

-CCDEPMODE = @CCDEPMODE@

-CFLAGS = @CFLAGS@

-CPP = @CPP@

-CPPFLAGS = @CPPFLAGS@

-CRYPTO_TESTDIR = @CRYPTO_TESTDIR@

-CYGPATH_W = @CYGPATH_W@

-DEFS = @DEFS@

-DEPDIR = @DEPDIR@

-DLLTOOL = @DLLTOOL@

-DSYMUTIL = @DSYMUTIL@

-DUMPBIN = @DUMPBIN@

-ECHO_C = @ECHO_C@

-ECHO_N = @ECHO_N@

-ECHO_T = @ECHO_T@

-EGREP = @EGREP@

-EXEEXT = @EXEEXT@

-EXSLT_INCLUDEDIR = @EXSLT_INCLUDEDIR@

-EXSLT_LIBDIR = @EXSLT_LIBDIR@

-EXSLT_LIBS = @EXSLT_LIBS@

-EXTRA_LIBS = @EXTRA_LIBS@

-FGREP = @FGREP@

-GREP = @GREP@

-HTML_DIR = @HTML_DIR@

-INSTALL = @INSTALL@

-INSTALL_DATA = @INSTALL_DATA@

-INSTALL_PROGRAM = @INSTALL_PROGRAM@

-INSTALL_SCRIPT = @INSTALL_SCRIPT@

-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

-LD = @LD@

-LDFLAGS = @LDFLAGS@

-LIBEXSLT_MAJOR_VERSION = @LIBEXSLT_MAJOR_VERSION@

-LIBEXSLT_MICRO_VERSION = @LIBEXSLT_MICRO_VERSION@

-LIBEXSLT_MINOR_VERSION = @LIBEXSLT_MINOR_VERSION@

-LIBEXSLT_VERSION = @LIBEXSLT_VERSION@

-LIBEXSLT_VERSION_EXTRA = @LIBEXSLT_VERSION_EXTRA@

-LIBEXSLT_VERSION_INFO = @LIBEXSLT_VERSION_INFO@

-LIBEXSLT_VERSION_NUMBER = @LIBEXSLT_VERSION_NUMBER@

-LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@

-LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@

-LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@

-LIBOBJS = @LIBOBJS@

-LIBS = @LIBS@

-LIBTOOL = @LIBTOOL@

-LIBXML_CFLAGS = @LIBXML_CFLAGS@

-LIBXML_LIBS = @LIBXML_LIBS@

-LIBXML_REQUIRED_VERSION = @LIBXML_REQUIRED_VERSION@

-LIBXML_SRC = @LIBXML_SRC@

-LIBXSLT_DEFAULT_PLUGINS_PATH = @LIBXSLT_DEFAULT_PLUGINS_PATH@

-LIBXSLT_MAJOR_MINOR_VERSION = @LIBXSLT_MAJOR_MINOR_VERSION@

-LIBXSLT_MAJOR_VERSION = @LIBXSLT_MAJOR_VERSION@

-LIBXSLT_MICRO_VERSION = @LIBXSLT_MICRO_VERSION@

-LIBXSLT_MINOR_VERSION = @LIBXSLT_MINOR_VERSION@

-LIBXSLT_VERSION = @LIBXSLT_VERSION@

-LIBXSLT_VERSION_EXTRA = @LIBXSLT_VERSION_EXTRA@

-LIBXSLT_VERSION_INFO = @LIBXSLT_VERSION_INFO@

-LIBXSLT_VERSION_NUMBER = @LIBXSLT_VERSION_NUMBER@

-LIPO = @LIPO@

-LN_S = @LN_S@

-LTLIBOBJS = @LTLIBOBJS@

-MAKEINFO = @MAKEINFO@

-MANIFEST_TOOL = @MANIFEST_TOOL@

-MKDIR_P = @MKDIR_P@

-MV = @MV@

-M_LIBS = @M_LIBS@

-NM = @NM@

-NMEDIT = @NMEDIT@

-OBJDUMP = @OBJDUMP@

-OBJEXT = @OBJEXT@

-OTOOL = @OTOOL@

-OTOOL64 = @OTOOL64@

-PACKAGE = @PACKAGE@

-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

-PACKAGE_NAME = @PACKAGE_NAME@

-PACKAGE_STRING = @PACKAGE_STRING@

-PACKAGE_TARNAME = @PACKAGE_TARNAME@

-PACKAGE_URL = @PACKAGE_URL@

-PACKAGE_VERSION = @PACKAGE_VERSION@

-PATH_SEPARATOR = @PATH_SEPARATOR@

-PERL = @PERL@

-PYTHON = @PYTHON@

-PYTHONSODV = @PYTHONSODV@

-PYTHON_INCLUDES = @PYTHON_INCLUDES@

-PYTHON_LIBS = @PYTHON_LIBS@

-PYTHON_SITE_PACKAGES = @PYTHON_SITE_PACKAGES@

-PYTHON_SUBDIR = @PYTHON_SUBDIR@

-PYTHON_VERSION = @PYTHON_VERSION@

-RANLIB = @RANLIB@

-RELDATE = @RELDATE@

-RM = @RM@

-SED = @SED@

-SET_MAKE = @SET_MAKE@

-SHELL = @SHELL@

-STRIP = @STRIP@

-TAR = @TAR@

-THREAD_LIBS = @THREAD_LIBS@

-VERSION = @VERSION@

-VERSION_SCRIPT_FLAGS = @VERSION_SCRIPT_FLAGS@

-WIN32_EXTRA_LDFLAGS = @WIN32_EXTRA_LDFLAGS@

-WIN32_EXTRA_LIBADD = @WIN32_EXTRA_LIBADD@

-WITH_CRYPTO = @WITH_CRYPTO@

-WITH_DEBUGGER = @WITH_DEBUGGER@

-WITH_MEM_DEBUG = @WITH_MEM_DEBUG@

-WITH_MODULES = @WITH_MODULES@

-WITH_TRIO = @WITH_TRIO@

-WITH_XSLT_DEBUG = @WITH_XSLT_DEBUG@

-XMLLINT = @XMLLINT@

-XML_CONFIG = @XML_CONFIG@

-XSLTPROC = @XSLTPROC@

-XSLTPROCDV = @XSLTPROCDV@

-XSLT_INCLUDEDIR = @XSLT_INCLUDEDIR@

-XSLT_LIBDIR = @XSLT_LIBDIR@

-XSLT_LIBS = @XSLT_LIBS@

-XSLT_LOCALE_WINAPI = @XSLT_LOCALE_WINAPI@

-XSLT_LOCALE_XLOCALE = @XSLT_LOCALE_XLOCALE@

-abs_builddir = @abs_builddir@

-abs_srcdir = @abs_srcdir@

-abs_top_builddir = @abs_top_builddir@

-abs_top_srcdir = @abs_top_srcdir@

-ac_ct_AR = @ac_ct_AR@

-ac_ct_CC = @ac_ct_CC@

-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@

-am__include = @am__include@

-am__leading_dot = @am__leading_dot@

-am__quote = @am__quote@

-am__tar = @am__tar@

-am__untar = @am__untar@

-bindir = @bindir@

-build = @build@

-build_alias = @build_alias@

-build_cpu = @build_cpu@

-build_os = @build_os@

-build_vendor = @build_vendor@

-builddir = @builddir@

-datadir = @datadir@

-datarootdir = @datarootdir@

-docdir = @docdir@

-dvidir = @dvidir@

-exec_prefix = @exec_prefix@

-host = @host@

-host_alias = @host_alias@

-host_cpu = @host_cpu@

-host_os = @host_os@

-host_vendor = @host_vendor@

-htmldir = @htmldir@

-includedir = @includedir@

-infodir = @infodir@

-install_sh = @install_sh@

-libdir = @libdir@

-libexecdir = @libexecdir@

-localedir = @localedir@

-localstatedir = @localstatedir@

-mandir = @mandir@

-mkdir_p = @mkdir_p@

-oldincludedir = @oldincludedir@

-pdfdir = @pdfdir@

-prefix = @prefix@

-program_transform_name = @program_transform_name@

-psdir = @psdir@

-pythondir = @pythondir@

-sbindir = @sbindir@

-sharedstatedir = @sharedstatedir@

-srcdir = @srcdir@

-sysconfdir = @sysconfdir@

-target_alias = @target_alias@

-top_build_prefix = @top_build_prefix@

-top_builddir = @top_builddir@

-top_srcdir = @top_srcdir@

-AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/libxslt -I$(top_srcdir)/libexslt \

- -I$(top_builddir) -I$(top_builddir)/libxslt \

- -I$(top_builddir)/libexslt

-AM_CFLAGS = $(LIBGCRYPT_CFLAGS) $(LIBXML_CFLAGS)

-lib_LTLIBRARIES = libexslt.la

-exsltincdir = $(includedir)/libexslt

-exsltinc_HEADERS = \

- exslt.h \

- exsltexports.h

-nodist_exsltinc_HEADERS = \

- exsltconfig.h

-libexslt_la_SOURCES = \

- exslt.c \

- common.c \

- crypto.c \

- math.c \

- sets.c \

- functions.c \

- strings.c \

- date.c \

- saxon.c \

- libexslt.h \

- dynamic.c

-libexslt_la_LIBADD = $(top_builddir)/libxslt/libxslt.la $(EXTRA_LIBS) $(LIBGCRYPT_LIBS) $(M_LIBS)

-libexslt_la_LDFLAGS = $(WIN32_EXTRA_LDFLAGS) -version-info $(LIBEXSLT_VERSION_INFO)

-man_MANS = libexslt.3

-EXTRA_DIST = $(man_MANS)

-all: all-am

-.SUFFIXES:

-.SUFFIXES: .c .lo .o .obj

-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)

- @for dep in $?; do \

- case '$(am__configure_deps)' in \

- *$$dep*) \

- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \

- && { if test -f $@; then exit 0; else break; fi; }; \

- exit 1;; \

- esac; \

- done; \

- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libexslt/Makefile'; \

- $(am__cd) $(top_srcdir) && \

- $(AUTOMAKE) --gnu libexslt/Makefile

-.PRECIOUS: Makefile

-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

- @case '$?' in \

- *config.status*) \

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

- *) \

- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

- esac;

-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(top_srcdir)/configure: $(am__configure_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(ACLOCAL_M4): $(am__aclocal_m4_deps)

- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

-$(am__aclocal_m4_deps):

-exsltconfig.h: $(top_builddir)/config.status $(srcdir)/exsltconfig.h.in

- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

-install-libLTLIBRARIES: $(lib_LTLIBRARIES)

- @$(NORMAL_INSTALL)

- @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \

- list2=; for p in $$list; do \

- if test -f $$p; then \

- list2="$$list2 $$p"; \

- else :; fi; \

- done; \

- test -z "$$list2" || { \

- echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \

- $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \

- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \

- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \

- }

-uninstall-libLTLIBRARIES:

- @$(NORMAL_UNINSTALL)

- @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \

- for p in $$list; do \

- $(am__strip_dir) \

- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \

- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \

- done

-clean-libLTLIBRARIES:

- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)

- @list='$(lib_LTLIBRARIES)'; \

- locs=`for p in $$list; do echo $$p; done | \

- sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \

- sort -u`; \

- test -z "$$locs" || { \

- echo rm -f $${locs}; \

- rm -f $${locs}; \

- }

-libexslt.la: $(libexslt_la_OBJECTS) $(libexslt_la_DEPENDENCIES) $(EXTRA_libexslt_la_DEPENDENCIES)

- $(AM_V_CCLD)$(libexslt_la_LINK) -rpath $(libdir) $(libexslt_la_OBJECTS) $(libexslt_la_LIBADD) $(LIBS)

-mostlyclean-compile:

- -rm -f *.$(OBJEXT)

-distclean-compile:

- -rm -f *.tab.c

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/date.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynamic.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exslt.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/functions.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/math.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/saxon.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sets.Plo@am__quote@

-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strings.Plo@am__quote@

-.c.o:

-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<

-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

-.c.obj:

-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`

-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

-.c.lo:

-@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<

-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@

-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<

-mostlyclean-libtool:

- -rm -f *.lo

-clean-libtool:

- -rm -rf .libs _libs

-install-man3: $(man_MANS)

- @$(NORMAL_INSTALL)

- @list1=''; \

- list2='$(man_MANS)'; \

- test -n "$(man3dir)" \

- && test -n "`echo $$list1$$list2`" \

- || exit 0; \

- echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \

- $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \

- { for i in $$list1; do echo "$$i"; done; \

- if test -n "$$list2"; then \

- for i in $$list2; do echo "$$i"; done \

- | sed -n '/\.3[a-z]*$$/p'; \

- fi; \

- } | while read p; do \

- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; echo "$$p"; \

- done | \

- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \

- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \

- sed 'N;N;s,\n, ,g' | { \

- list=; while read file base inst; do \

- if test "$$base" = "$$inst"; then list="$$list $$file"; else \

- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \

- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \

- fi; \

- done; \

- for i in $$list; do echo "$$i"; done | $(am__base_list) | \

- while read files; do \

- test -z "$$files" || { \

- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \

- $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \

- done; }

-uninstall-man3:

- @$(NORMAL_UNINSTALL)

- @list=''; test -n "$(man3dir)" || exit 0; \

- files=`{ for i in $$list; do echo "$$i"; done; \

- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \

- sed -n '/\.3[a-z]*$$/p'; \

- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \

- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \

- dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)

-install-exsltincHEADERS: $(exsltinc_HEADERS)

- @$(NORMAL_INSTALL)

- @list='$(exsltinc_HEADERS)'; test -n "$(exsltincdir)" || list=; \

- if test -n "$$list"; then \

- echo " $(MKDIR_P) '$(DESTDIR)$(exsltincdir)'"; \

- $(MKDIR_P) "$(DESTDIR)$(exsltincdir)" || exit 1; \

- fi; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(exsltincdir)'"; \

- $(INSTALL_HEADER) $$files "$(DESTDIR)$(exsltincdir)" || exit $$?; \

- done

-uninstall-exsltincHEADERS:

- @$(NORMAL_UNINSTALL)

- @list='$(exsltinc_HEADERS)'; test -n "$(exsltincdir)" || list=; \

- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \

- dir='$(DESTDIR)$(exsltincdir)'; $(am__uninstall_files_from_dir)

-install-nodist_exsltincHEADERS: $(nodist_exsltinc_HEADERS)

- @$(NORMAL_INSTALL)

- @list='$(nodist_exsltinc_HEADERS)'; test -n "$(exsltincdir)" || list=; \

- if test -n "$$list"; then \

- echo " $(MKDIR_P) '$(DESTDIR)$(exsltincdir)'"; \

- $(MKDIR_P) "$(DESTDIR)$(exsltincdir)" || exit 1; \

- fi; \

- for p in $$list; do \

- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \

- echo "$$d$$p"; \

- done | $(am__base_list) | \

- while read files; do \

- echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(exsltincdir)'"; \

- $(INSTALL_HEADER) $$files "$(DESTDIR)$(exsltincdir)" || exit $$?; \

- done

-uninstall-nodist_exsltincHEADERS:

- @$(NORMAL_UNINSTALL)

- @list='$(nodist_exsltinc_HEADERS)'; test -n "$(exsltincdir)" || list=; \

- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \

- dir='$(DESTDIR)$(exsltincdir)'; $(am__uninstall_files_from_dir)

-ID: $(am__tagged_files)

- $(am__define_uniq_tagged_files); mkid -fID $$unique

-tags: tags-am

-TAGS: tags

-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

- set x; \

- here=`pwd`; \

- $(am__define_uniq_tagged_files); \

- shift; \

- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \

- test -n "$$unique" || unique=$$empty_fix; \

- if test $$# -gt 0; then \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- "$$@" $$unique; \

- else \

- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

- $$unique; \

- fi; \

- fi

-ctags: ctags-am

-CTAGS: ctags

-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)

- $(am__define_uniq_tagged_files); \

- test -z "$(CTAGS_ARGS)$$unique" \

- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

- $$unique

-GTAGS:

- here=`$(am__cd) $(top_builddir) && pwd` \

- && $(am__cd) $(top_srcdir) \

- && gtags -i $(GTAGS_ARGS) "$$here"

-cscopelist: cscopelist-am

-cscopelist-am: $(am__tagged_files)

- list='$(am__tagged_files)'; \

- case "$(srcdir)" in \

- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \

- *) sdir=$(subdir)/$(srcdir) ;; \

- esac; \

- for i in $$list; do \

- if test -f "$$i"; then \

- echo "$(subdir)/$$i"; \

- else \

- echo "$$sdir/$$i"; \

- fi; \

- done >> $(top_builddir)/cscope.files

-distclean-tags:

- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

-distdir: $(DISTFILES)

- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \

- list='$(DISTFILES)'; \

- dist_files=`for file in $$list; do echo $$file; done | \

- sed -e "s|^$$srcdirstrip/||;t" \

- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \

- case $$dist_files in \

- */*) $(MKDIR_P) `echo "$$dist_files" | \

- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \

- sort -u` ;; \

- esac; \

- for file in $$dist_files; do \

- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

- if test -d $$d/$$file; then \

- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \

- if test -d "$(distdir)/$$file"; then \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \

- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \

- fi; \

- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \

- else \

- test -f "$(distdir)/$$file" \

- || cp -p $$d/$$file "$(distdir)/$$file" \

- || exit 1; \

- fi; \

- done

-check-am: all-am

-check: check-am

-all-am: Makefile $(LTLIBRARIES) $(MANS) $(HEADERS)

-installdirs:

- for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(exsltincdir)" "$(DESTDIR)$(exsltincdir)"; do \

- test -z "$$dir" || $(MKDIR_P) "$$dir"; \

- done

-install: install-am

-install-exec: install-exec-am

-install-data: install-data-am

-uninstall: uninstall-am

-install-am: all-am

- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

-installcheck: installcheck-am

-install-strip:

- if test -z '$(STRIP)'; then \

- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

- install; \

- else \

- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \

- fi

-mostlyclean-generic:

-clean-generic:

-distclean-generic:

- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

-maintainer-clean-generic:

- @echo "This command is intended for maintainers to use"

- @echo "it deletes files that may require special tools to rebuild."

-clean: clean-am

-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \

- mostlyclean-am

-distclean: distclean-am

- -rm -rf ./$(DEPDIR)

- -rm -f Makefile

-distclean-am: clean-am distclean-compile distclean-generic \

- distclean-tags

-dvi: dvi-am

-dvi-am:

-html: html-am

-html-am:

-info: info-am

-info-am:

-install-data-am: install-exsltincHEADERS install-man \

- install-nodist_exsltincHEADERS

-install-dvi: install-dvi-am

-install-dvi-am:

-install-exec-am: install-libLTLIBRARIES

-install-html: install-html-am

-install-html-am:

-install-info: install-info-am

-install-info-am:

-install-man: install-man3

-install-pdf: install-pdf-am

-install-pdf-am:

-install-ps: install-ps-am

-install-ps-am:

-installcheck-am:

-maintainer-clean: maintainer-clean-am

- -rm -rf ./$(DEPDIR)

- -rm -f Makefile

-maintainer-clean-am: distclean-am maintainer-clean-generic

-mostlyclean: mostlyclean-am

-mostlyclean-am: mostlyclean-compile mostlyclean-generic \

- mostlyclean-libtool

-pdf: pdf-am

-pdf-am:

-ps: ps-am

-ps-am:

-uninstall-am: uninstall-exsltincHEADERS uninstall-libLTLIBRARIES \

- uninstall-man uninstall-nodist_exsltincHEADERS

-uninstall-man: uninstall-man3

-.MAKE: install-am install-strip

-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \

- clean-libLTLIBRARIES clean-libtool cscopelist-am ctags \

- ctags-am distclean distclean-compile distclean-generic \

- distclean-libtool distclean-tags distdir dvi dvi-am html \

- html-am info info-am install install-am install-data \

- install-data-am install-dvi install-dvi-am install-exec \

- install-exec-am install-exsltincHEADERS install-html \

- install-html-am install-info install-info-am \

- install-libLTLIBRARIES install-man install-man3 \

- install-nodist_exsltincHEADERS install-pdf install-pdf-am \

- install-ps install-ps-am install-strip installcheck \

- installcheck-am installdirs maintainer-clean \

- maintainer-clean-generic mostlyclean mostlyclean-compile \

- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \

- tags tags-am uninstall uninstall-am uninstall-exsltincHEADERS \

- uninstall-libLTLIBRARIES uninstall-man uninstall-man3 \

- uninstall-nodist_exsltincHEADERS

-# Tell versions [3.59,3.63) of GNU make to not export all variables.

-# Otherwise a system limit (for SysV at least) may be exceeded.

-.NOEXPORT:

« no previous file with comments | « third_party/libxslt/libexslt/Makefile.am ('k') | third_party/libxslt/libexslt/common.c » ('j') | no next file with comments »