[sql] Remove SQLite 3.10.2 reference directory.

third_party/sqlite/sqlite-src-3100200/src/sqliteInt.h

-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code.  In place of
-** a legal notice, here is a blessing:
-**
-**    May you do good and not evil.
-**    May you find forgiveness for yourself and forgive others.
-**    May you share freely, never taking more than you give.
-**
-*************************************************************************
-** Internal interface definitions for SQLite.
-**
-*/
-#ifndef _SQLITEINT_H_
-#define _SQLITEINT_H_
-
-/*
-** Include the header file used to customize the compiler options for MSVC.
-** This should be done first so that it can successfully prevent spurious
-** compiler warnings due to subsequent content in this file and other files
-** that are included by this file.
-*/
-#include "msvc.h"
-
-/*
-** Special setup for VxWorks
-*/
-#include "vxworks.h"
-
-/*
-** These #defines should enable >2GB file support on POSIX if the
-** underlying operating system supports it.  If the OS lacks
-** large file support, or if the OS is windows, these should be no-ops.
-**
-** Ticket #2739:  The _LARGEFILE_SOURCE macro must appear before any
-** system #includes.  Hence, this block of code must be the very first
-** code in all source files.
-**
-** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch
-** on the compiler command line.  This is necessary if you are compiling
-** on a recent machine (ex: Red Hat 7.2) but you want your code to work
-** on an older machine (ex: Red Hat 6.0).  If you compile on Red Hat 7.2
-** without this option, LFS is enable.  But LFS does not exist in the kernel
-** in Red Hat 6.0, so the code won't work.  Hence, for maximum binary
-** portability you should omit LFS.
-**
-** The previous paragraph was written in 2005.  (This paragraph is written
-** on 2008-11-28.) These days, all Linux kernels support large files, so
-** you should probably leave LFS enabled.  But some embedded platforms might
-** lack LFS in which case the SQLITE_DISABLE_LFS macro might still be useful.
-**
-** Similar is true for Mac OS X.  LFS is only supported on Mac OS X 9 and later.
-*/
-#ifndef SQLITE_DISABLE_LFS
-# define _LARGE_FILE       1
-# ifndef _FILE_OFFSET_BITS
-#   define _FILE_OFFSET_BITS 64
-# endif
-# define _LARGEFILE_SOURCE 1
-#endif
-
-/* What version of GCC is being used.  0 means GCC is not being used */
-#ifdef __GNUC__
-# define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__)
-#else
-# define GCC_VERSION 0
-#endif
-
-/* Needed for various definitions... */
-#if defined(__GNUC__) && !defined(_GNU_SOURCE)
-# define _GNU_SOURCE
-#endif
-
-#if defined(__OpenBSD__) && !defined(_BSD_SOURCE)
-# define _BSD_SOURCE
-#endif
-
-/*
-** For MinGW, check to see if we can include the header file containing its
-** version information, among other things.  Normally, this internal MinGW
-** header file would [only] be included automatically by other MinGW header
-** files; however, the contained version information is now required by this
-** header file to work around binary compatibility issues (see below) and
-** this is the only known way to reliably obtain it.  This entire #if block
-** would be completely unnecessary if there was any other way of detecting
-** MinGW via their preprocessor (e.g. if they customized their GCC to define
-** some MinGW-specific macros).  When compiling for MinGW, either the
-** _HAVE_MINGW_H or _HAVE__MINGW_H (note the extra underscore) macro must be
-** defined; otherwise, detection of conditions specific to MinGW will be
-** disabled.
-*/
-#if defined(_HAVE_MINGW_H)
-# include "mingw.h"
-#elif defined(_HAVE__MINGW_H)
-# include "_mingw.h"
-#endif
-
-/*
-** For MinGW version 4.x (and higher), check to see if the _USE_32BIT_TIME_T
-** define is required to maintain binary compatibility with the MSVC runtime
-** library in use (e.g. for Windows XP).
-*/
-#if !defined(_USE_32BIT_TIME_T) && !defined(_USE_64BIT_TIME_T) && \
-    defined(_WIN32) && !defined(_WIN64) && \
-    defined(__MINGW_MAJOR_VERSION) && __MINGW_MAJOR_VERSION >= 4 && \
-    defined(__MSVCRT__)
-# define _USE_32BIT_TIME_T
-#endif
-
-/* The public SQLite interface.  The _FILE_OFFSET_BITS macro must appear
-** first in QNX.  Also, the _USE_32BIT_TIME_T macro must appear first for
-** MinGW.
-*/
-#include "sqlite3.h"
-
-/*
-** Include the configuration header output by 'configure' if we're using the
-** autoconf-based build
-*/
-#ifdef _HAVE_SQLITE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "sqliteLimit.h"
-
-/* Disable nuisance warnings on Borland compilers */
-#if defined(__BORLANDC__)
-#pragma warn -rch /* unreachable code */
-#pragma warn -ccc /* Condition is always true or false */
-#pragma warn -aus /* Assigned value is never used */
-#pragma warn -csu /* Comparing signed and unsigned */
-#pragma warn -spa /* Suspicious pointer arithmetic */
-#endif
-
-/*
-** Include standard header files as necessary
-*/
-#ifdef HAVE_STDINT_H
-#include <stdint.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-#include <inttypes.h>
-#endif
-
-/*
-** The following macros are used to cast pointers to integers and
-** integers to pointers.  The way you do this varies from one compiler
-** to the next, so we have developed the following set of #if statements
-** to generate appropriate macros for a wide range of compilers.
-**
-** The correct "ANSI" way to do this is to use the intptr_t type. 
-** Unfortunately, that typedef is not available on all compilers, or
-** if it is available, it requires an #include of specific headers
-** that vary from one machine to the next.
-**
-** Ticket #3860:  The llvm-gcc-4.2 compiler from Apple chokes on
-** the ((void*)&((char*)0)[X]) construct.  But MSVC chokes on ((void*)(X)).
-** So we have to define the macros in different ways depending on the
-** compiler.
-*/
-#if defined(__PTRDIFF_TYPE__)  /* This case should work for GCC */
-# define SQLITE_INT_TO_PTR(X)  ((void*)(__PTRDIFF_TYPE__)(X))
-# define SQLITE_PTR_TO_INT(X)  ((int)(__PTRDIFF_TYPE__)(X))
-#elif !defined(__GNUC__)       /* Works for compilers other than LLVM */
-# define SQLITE_INT_TO_PTR(X)  ((void*)&((char*)0)[X])
-# define SQLITE_PTR_TO_INT(X)  ((int)(((char*)X)-(char*)0))
-#elif defined(HAVE_STDINT_H)   /* Use this case if we have ANSI headers */
-# define SQLITE_INT_TO_PTR(X)  ((void*)(intptr_t)(X))
-# define SQLITE_PTR_TO_INT(X)  ((int)(intptr_t)(X))
-#else                          /* Generates a warning - but it always works */
-# define SQLITE_INT_TO_PTR(X)  ((void*)(X))
-# define SQLITE_PTR_TO_INT(X)  ((int)(X))
-#endif
-
-/*
-** The SQLITE_WITHIN(P,S,E) macro checks to see if pointer P points to
-** something between S (inclusive) and E (exclusive).
-**
-** In other words, S is a buffer and E is a pointer to the first byte after
-** the end of buffer S.  This macro returns true if P points to something
-** contained within the buffer S.
-*/
-#if defined(HAVE_STDINT_H)
-# define SQLITE_WITHIN(P,S,E) \
-    ((uintptr_t)(P)>=(uintptr_t)(S) && (uintptr_t)(P)<(uintptr_t)(E))
-#else
-# define SQLITE_WITHIN(P,S,E) ((P)>=(S) && (P)<(E))
-#endif
-
-/*
-** A macro to hint to the compiler that a function should not be
-** inlined.
-*/
-#if defined(__GNUC__)
-#  define SQLITE_NOINLINE  __attribute__((noinline))
-#elif defined(_MSC_VER) && _MSC_VER>=1310
-#  define SQLITE_NOINLINE  __declspec(noinline)
-#else
-#  define SQLITE_NOINLINE
-#endif
-
-/*
-** Make sure that the compiler intrinsics we desire are enabled when
-** compiling with an appropriate version of MSVC unless prevented by
-** the SQLITE_DISABLE_INTRINSIC define.
-*/
-#if !defined(SQLITE_DISABLE_INTRINSIC)
-#  if defined(_MSC_VER) && _MSC_VER>=1300
-#    if !defined(_WIN32_WCE)
-#      include <intrin.h>
-#      pragma intrinsic(_byteswap_ushort)
-#      pragma intrinsic(_byteswap_ulong)
-#      pragma intrinsic(_ReadWriteBarrier)
-#    else
-#      include <cmnintrin.h>
-#    endif
-#  endif
-#endif
-
-/*
-** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2.
-** 0 means mutexes are permanently disable and the library is never
-** threadsafe.  1 means the library is serialized which is the highest
-** level of threadsafety.  2 means the library is multithreaded - multiple
-** threads can use SQLite as long as no two threads try to use the same
-** database connection at the same time.
-**
-** Older versions of SQLite used an optional THREADSAFE macro.
-** We support that for legacy.
-*/
-#if !defined(SQLITE_THREADSAFE)
-# if defined(THREADSAFE)
-#   define SQLITE_THREADSAFE THREADSAFE
-# else
-#   define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */
-# endif
-#endif
-
-/*
-** Powersafe overwrite is on by default.  But can be turned off using
-** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option.
-*/
-#ifndef SQLITE_POWERSAFE_OVERWRITE
-# define SQLITE_POWERSAFE_OVERWRITE 1
-#endif
-
-/*
-** EVIDENCE-OF: R-25715-37072 Memory allocation statistics are enabled by
-** default unless SQLite is compiled with SQLITE_DEFAULT_MEMSTATUS=0 in
-** which case memory allocation statistics are disabled by default.
-*/
-#if !defined(SQLITE_DEFAULT_MEMSTATUS)
-# define SQLITE_DEFAULT_MEMSTATUS 1
-#endif
-
-/*
-** Exactly one of the following macros must be defined in order to
-** specify which memory allocation subsystem to use.
-**
-**     SQLITE_SYSTEM_MALLOC          // Use normal system malloc()
-**     SQLITE_WIN32_MALLOC           // Use Win32 native heap API
-**     SQLITE_ZERO_MALLOC            // Use a stub allocator that always fails
-**     SQLITE_MEMDEBUG               // Debugging version of system malloc()
-**
-** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the
-** assert() macro is enabled, each call into the Win32 native heap subsystem
-** will cause HeapValidate to be called.  If heap validation should fail, an
-** assertion will be triggered.
-**
-** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as
-** the default.
-*/
-#if defined(SQLITE_SYSTEM_MALLOC) \
-  + defined(SQLITE_WIN32_MALLOC) \
-  + defined(SQLITE_ZERO_MALLOC) \
-  + defined(SQLITE_MEMDEBUG)>1
-# error "Two or more of the following compile-time configuration options\
- are defined but at most one is allowed:\
- SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\
- SQLITE_ZERO_MALLOC"
-#endif
-#if defined(SQLITE_SYSTEM_MALLOC) \
-  + defined(SQLITE_WIN32_MALLOC) \
-  + defined(SQLITE_ZERO_MALLOC) \
-  + defined(SQLITE_MEMDEBUG)==0
-# define SQLITE_SYSTEM_MALLOC 1
-#endif
-
-/*
-** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the
-** sizes of memory allocations below this value where possible.
-*/
-#if !defined(SQLITE_MALLOC_SOFT_LIMIT)
-# define SQLITE_MALLOC_SOFT_LIMIT 1024
-#endif
-
-/*
-** We need to define _XOPEN_SOURCE as follows in order to enable
-** recursive mutexes on most Unix systems and fchmod() on OpenBSD.
-** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit
-** it.
-*/
-#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__)
-#  define _XOPEN_SOURCE 600
-#endif
-
-/*
-** NDEBUG and SQLITE_DEBUG are opposites.  It should always be true that
-** defined(NDEBUG)==!defined(SQLITE_DEBUG).  If this is not currently true,
-** make it true by defining or undefining NDEBUG.
-**
-** Setting NDEBUG makes the code smaller and faster by disabling the
-** assert() statements in the code.  So we want the default action
-** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG
-** is set.  Thus NDEBUG becomes an opt-in rather than an opt-out
-** feature.
-*/
-#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) 
-# define NDEBUG 1
-#endif
-#if defined(NDEBUG) && defined(SQLITE_DEBUG)
-# undef NDEBUG
-#endif
-
-/*
-** Enable SQLITE_ENABLE_EXPLAIN_COMMENTS if SQLITE_DEBUG is turned on.
-*/
-#if !defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) && defined(SQLITE_DEBUG)
-# define SQLITE_ENABLE_EXPLAIN_COMMENTS 1
-#endif
-
-/*
-** The testcase() macro is used to aid in coverage testing.  When 
-** doing coverage testing, the condition inside the argument to
-** testcase() must be evaluated both true and false in order to
-** get full branch coverage.  The testcase() macro is inserted
-** to help ensure adequate test coverage in places where simple
-** condition/decision coverage is inadequate.  For example, testcase()
-** can be used to make sure boundary values are tested.  For
-** bitmask tests, testcase() can be used to make sure each bit
-** is significant and used at least once.  On switch statements
-** where multiple cases go to the same block of code, testcase()
-** can insure that all cases are evaluated.
-**
-*/
-#ifdef SQLITE_COVERAGE_TEST
-  void sqlite3Coverage(int);
-# define testcase(X)  if( X ){ sqlite3Coverage(__LINE__); }
-#else
-# define testcase(X)
-#endif
-
-/*
-** The TESTONLY macro is used to enclose variable declarations or
-** other bits of code that are needed to support the arguments
-** within testcase() and assert() macros.
-*/
-#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST)
-# define TESTONLY(X)  X
-#else
-# define TESTONLY(X)
-#endif
-
-/*
-** Sometimes we need a small amount of code such as a variable initialization
-** to setup for a later assert() statement.  We do not want this code to
-** appear when assert() is disabled.  The following macro is therefore
-** used to contain that setup code.  The "VVA" acronym stands for
-** "Verification, Validation, and Accreditation".  In other words, the
-** code within VVA_ONLY() will only run during verification processes.
-*/
-#ifndef NDEBUG
-# define VVA_ONLY(X)  X
-#else
-# define VVA_ONLY(X)
-#endif
-
-/*
-** The ALWAYS and NEVER macros surround boolean expressions which 
-** are intended to always be true or false, respectively.  Such
-** expressions could be omitted from the code completely.  But they
-** are included in a few cases in order to enhance the resilience
-** of SQLite to unexpected behavior - to make the code "self-healing"
-** or "ductile" rather than being "brittle" and crashing at the first
-** hint of unplanned behavior.
-**
-** In other words, ALWAYS and NEVER are added for defensive code.
-**
-** When doing coverage testing ALWAYS and NEVER are hard-coded to
-** be true and false so that the unreachable code they specify will
-** not be counted as untested code.
-*/
-#if defined(SQLITE_COVERAGE_TEST)
-# define ALWAYS(X)      (1)
-# define NEVER(X)       (0)
-#elif !defined(NDEBUG)
-# define ALWAYS(X)      ((X)?1:(assert(0),0))
-# define NEVER(X)       ((X)?(assert(0),1):0)
-#else
-# define ALWAYS(X)      (X)
-# define NEVER(X)       (X)
-#endif
-
-/*
-** Declarations used for tracing the operating system interfaces.
-*/
-#if defined(SQLITE_FORCE_OS_TRACE) || defined(SQLITE_TEST) || \
-    (defined(SQLITE_DEBUG) && SQLITE_OS_WIN)
-  extern int sqlite3OSTrace;
-# define OSTRACE(X)          if( sqlite3OSTrace ) sqlite3DebugPrintf X
-# define SQLITE_HAVE_OS_TRACE
-#else
-# define OSTRACE(X)
-# undef  SQLITE_HAVE_OS_TRACE
-#endif
-
-/*
-** Is the sqlite3ErrName() function needed in the build?  Currently,
-** it is needed by "mutex_w32.c" (when debugging), "os_win.c" (when
-** OSTRACE is enabled), and by several "test*.c" files (which are
-** compiled using SQLITE_TEST).
-*/
-#if defined(SQLITE_HAVE_OS_TRACE) || defined(SQLITE_TEST) || \
-    (defined(SQLITE_DEBUG) && SQLITE_OS_WIN)
-# define SQLITE_NEED_ERR_NAME
-#else
-# undef  SQLITE_NEED_ERR_NAME
-#endif
-
-/*
-** Return true (non-zero) if the input is an integer that is too large
-** to fit in 32-bits.  This macro is used inside of various testcase()
-** macros to verify that we have tested SQLite for large-file support.
-*/
-#define IS_BIG_INT(X)  (((X)&~(i64)0xffffffff)!=0)
-
-/*
-** The macro unlikely() is a hint that surrounds a boolean
-** expression that is usually false.  Macro likely() surrounds
-** a boolean expression that is usually true.  These hints could,
-** in theory, be used by the compiler to generate better code, but
-** currently they are just comments for human readers.
-*/
-#define likely(X)    (X)
-#define unlikely(X)  (X)
-
-#include "hash.h"
-#include "parse.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-#include <stddef.h>
-
-/*
-** If compiling for a processor that lacks floating point support,
-** substitute integer for floating-point
-*/
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# define double sqlite_int64
-# define float sqlite_int64
-# define LONGDOUBLE_TYPE sqlite_int64
-# ifndef SQLITE_BIG_DBL
-#   define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50)
-# endif
-# define SQLITE_OMIT_DATETIME_FUNCS 1
-# define SQLITE_OMIT_TRACE 1
-# undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT
-# undef SQLITE_HAVE_ISNAN
-#endif
-#ifndef SQLITE_BIG_DBL
-# define SQLITE_BIG_DBL (1e99)
-#endif
-
-/*
-** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0
-** afterward. Having this macro allows us to cause the C compiler 
-** to omit code used by TEMP tables without messy #ifndef statements.
-*/
-#ifdef SQLITE_OMIT_TEMPDB
-#define OMIT_TEMPDB 1
-#else
-#define OMIT_TEMPDB 0
-#endif
-
-/*
-** The "file format" number is an integer that is incremented whenever
-** the VDBE-level file format changes.  The following macros define the
-** the default file format for new databases and the maximum file format
-** that the library can read.
-*/
-#define SQLITE_MAX_FILE_FORMAT 4
-#ifndef SQLITE_DEFAULT_FILE_FORMAT
-# define SQLITE_DEFAULT_FILE_FORMAT 4
-#endif
-
-/*
-** Determine whether triggers are recursive by default.  This can be
-** changed at run-time using a pragma.
-*/
-#ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS
-# define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0
-#endif
-
-/*
-** Provide a default value for SQLITE_TEMP_STORE in case it is not specified
-** on the command-line
-*/
-#ifndef SQLITE_TEMP_STORE
-# define SQLITE_TEMP_STORE 1
-# define SQLITE_TEMP_STORE_xc 1  /* Exclude from ctime.c */
-#endif
-
-/*
-** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if
-** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it 
-** to zero.
-*/
-#if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0
-# undef SQLITE_MAX_WORKER_THREADS
-# define SQLITE_MAX_WORKER_THREADS 0
-#endif
-#ifndef SQLITE_MAX_WORKER_THREADS
-# define SQLITE_MAX_WORKER_THREADS 8
-#endif
-#ifndef SQLITE_DEFAULT_WORKER_THREADS
-# define SQLITE_DEFAULT_WORKER_THREADS 0
-#endif
-#if SQLITE_DEFAULT_WORKER_THREADS>SQLITE_MAX_WORKER_THREADS
-# undef SQLITE_MAX_WORKER_THREADS
-# define SQLITE_MAX_WORKER_THREADS SQLITE_DEFAULT_WORKER_THREADS
-#endif
-
-/*
-** The default initial allocation for the pagecache when using separate
-** pagecaches for each database connection.  A positive number is the
-** number of pages.  A negative number N translations means that a buffer
-** of -1024*N bytes is allocated and used for as many pages as it will hold.
-*/
-#ifndef SQLITE_DEFAULT_PCACHE_INITSZ
-# define SQLITE_DEFAULT_PCACHE_INITSZ 100
-#endif
-
-/*
-** GCC does not define the offsetof() macro so we'll have to do it
-** ourselves.
-*/
-#ifndef offsetof
-#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD))
-#endif
-
-/*
-** Macros to compute minimum and maximum of two numbers.
-*/
-#define MIN(A,B) ((A)<(B)?(A):(B))
-#define MAX(A,B) ((A)>(B)?(A):(B))
-
-/*
-** Swap two objects of type TYPE.
-*/
-#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;}
-
-/*
-** Check to see if this machine uses EBCDIC.  (Yes, believe it or
-** not, there are still machines out there that use EBCDIC.)
-*/
-#if 'A' == '\301'
-# define SQLITE_EBCDIC 1
-#else
-# define SQLITE_ASCII 1
-#endif
-
-/*
-** Integers of known sizes.  These typedefs might change for architectures
-** where the sizes very.  Preprocessor macros are available so that the
-** types can be conveniently redefined at compile-type.  Like this:
-**
-**         cc '-DUINTPTR_TYPE=long long int' ...
-*/
-#ifndef UINT32_TYPE
-# ifdef HAVE_UINT32_T
-#  define UINT32_TYPE uint32_t
-# else
-#  define UINT32_TYPE unsigned int
-# endif
-#endif
-#ifndef UINT16_TYPE
-# ifdef HAVE_UINT16_T
-#  define UINT16_TYPE uint16_t
-# else
-#  define UINT16_TYPE unsigned short int
-# endif
-#endif
-#ifndef INT16_TYPE
-# ifdef HAVE_INT16_T
-#  define INT16_TYPE int16_t
-# else
-#  define INT16_TYPE short int
-# endif
-#endif
-#ifndef UINT8_TYPE
-# ifdef HAVE_UINT8_T
-#  define UINT8_TYPE uint8_t
-# else
-#  define UINT8_TYPE unsigned char
-# endif
-#endif
-#ifndef INT8_TYPE
-# ifdef HAVE_INT8_T
-#  define INT8_TYPE int8_t
-# else
-#  define INT8_TYPE signed char
-# endif
-#endif
-#ifndef LONGDOUBLE_TYPE
-# define LONGDOUBLE_TYPE long double
-#endif
-typedef sqlite_int64 i64;          /* 8-byte signed integer */
-typedef sqlite_uint64 u64;         /* 8-byte unsigned integer */
-typedef UINT32_TYPE u32;           /* 4-byte unsigned integer */
-typedef UINT16_TYPE u16;           /* 2-byte unsigned integer */
-typedef INT16_TYPE i16;            /* 2-byte signed integer */
-typedef UINT8_TYPE u8;             /* 1-byte unsigned integer */
-typedef INT8_TYPE i8;              /* 1-byte signed integer */
-
-/*
-** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value
-** that can be stored in a u32 without loss of data.  The value
-** is 0x00000000ffffffff.  But because of quirks of some compilers, we
-** have to specify the value in the less intuitive manner shown:
-*/
-#define SQLITE_MAX_U32  ((((u64)1)<<32)-1)
-
-/*
-** The datatype used to store estimates of the number of rows in a
-** table or index.  This is an unsigned integer type.  For 99.9% of
-** the world, a 32-bit integer is sufficient.  But a 64-bit integer
-** can be used at compile-time if desired.
-*/
-#ifdef SQLITE_64BIT_STATS
- typedef u64 tRowcnt;    /* 64-bit only if requested at compile-time */
-#else
- typedef u32 tRowcnt;    /* 32-bit is the default */
-#endif
-
-/*
-** Estimated quantities used for query planning are stored as 16-bit
-** logarithms.  For quantity X, the value stored is 10*log2(X).  This
-** gives a possible range of values of approximately 1.0e986 to 1e-986.
-** But the allowed values are "grainy".  Not every value is representable.
-** For example, quantities 16 and 17 are both represented by a LogEst
-** of 40.  However, since LogEst quantities are suppose to be estimates,
-** not exact values, this imprecision is not a problem.
-**
-** "LogEst" is short for "Logarithmic Estimate".
-**
-** Examples:
-**      1 -> 0              20 -> 43          10000 -> 132
-**      2 -> 10             25 -> 46          25000 -> 146
-**      3 -> 16            100 -> 66        1000000 -> 199
-**      4 -> 20           1000 -> 99        1048576 -> 200
-**     10 -> 33           1024 -> 100    4294967296 -> 320
-**
-** The LogEst can be negative to indicate fractional values. 
-** Examples:
-**
-**    0.5 -> -10           0.1 -> -33        0.0625 -> -40
-*/
-typedef INT16_TYPE LogEst;
-
-/*
-** Set the SQLITE_PTRSIZE macro to the number of bytes in a pointer
-*/
-#ifndef SQLITE_PTRSIZE
-# if defined(__SIZEOF_POINTER__)
-#   define SQLITE_PTRSIZE __SIZEOF_POINTER__
-# elif defined(i386)     || defined(__i386__)   || defined(_M_IX86) ||    \
-       defined(_M_ARM)   || defined(__arm__)    || defined(__x86)
-#   define SQLITE_PTRSIZE 4
-# else
-#   define SQLITE_PTRSIZE 8
-# endif
-#endif
-
-/*
-** Macros to determine whether the machine is big or little endian,
-** and whether or not that determination is run-time or compile-time.
-**
-** For best performance, an attempt is made to guess at the byte-order
-** using C-preprocessor macros.  If that is unsuccessful, or if
-** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined
-** at run-time.
-*/
-#if (defined(i386)     || defined(__i386__)   || defined(_M_IX86) ||    \
-     defined(__x86_64) || defined(__x86_64__) || defined(_M_X64)  ||    \
-     defined(_M_AMD64) || defined(_M_ARM)     || defined(__x86)   ||    \
-     defined(__arm__)) && !defined(SQLITE_RUNTIME_BYTEORDER)
-# define SQLITE_BYTEORDER    1234
-# define SQLITE_BIGENDIAN    0
-# define SQLITE_LITTLEENDIAN 1
-# define SQLITE_UTF16NATIVE  SQLITE_UTF16LE
-#endif
-#if (defined(sparc)    || defined(__ppc__))  \
-    && !defined(SQLITE_RUNTIME_BYTEORDER)
-# define SQLITE_BYTEORDER    4321
-# define SQLITE_BIGENDIAN    1
-# define SQLITE_LITTLEENDIAN 0
-# define SQLITE_UTF16NATIVE  SQLITE_UTF16BE
-#endif
-#if !defined(SQLITE_BYTEORDER)
-# ifdef SQLITE_AMALGAMATION
-  const int sqlite3one = 1;
-# else
-  extern const int sqlite3one;
-# endif
-# define SQLITE_BYTEORDER    0     /* 0 means "unknown at compile-time" */
-# define SQLITE_BIGENDIAN    (*(char *)(&sqlite3one)==0)
-# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1)
-# define SQLITE_UTF16NATIVE  (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE)
-#endif
-
-/*
-** Constants for the largest and smallest possible 64-bit signed integers.
-** These macros are designed to work correctly on both 32-bit and 64-bit
-** compilers.
-*/
-#define LARGEST_INT64  (0xffffffff|(((i64)0x7fffffff)<<32))
-#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64)
-
-/* 
-** Round up a number to the next larger multiple of 8.  This is used
-** to force 8-byte alignment on 64-bit architectures.
-*/
-#define ROUND8(x)     (((x)+7)&~7)
-
-/*
-** Round down to the nearest multiple of 8
-*/
-#define ROUNDDOWN8(x) ((x)&~7)
-
-/*
-** Assert that the pointer X is aligned to an 8-byte boundary.  This
-** macro is used only within assert() to verify that the code gets
-** all alignment restrictions correct.
-**
-** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the
-** underlying malloc() implementation might return us 4-byte aligned
-** pointers.  In that case, only verify 4-byte alignment.
-*/
-#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC
-# define EIGHT_BYTE_ALIGNMENT(X)   ((((char*)(X) - (char*)0)&3)==0)
-#else
-# define EIGHT_BYTE_ALIGNMENT(X)   ((((char*)(X) - (char*)0)&7)==0)
-#endif
-
-/*
-** Disable MMAP on platforms where it is known to not work
-*/
-#if defined(__OpenBSD__) || defined(__QNXNTO__)
-# undef SQLITE_MAX_MMAP_SIZE
-# define SQLITE_MAX_MMAP_SIZE 0
-#endif
-
-/*
-** Default maximum size of memory used by memory-mapped I/O in the VFS
-*/
-#ifdef __APPLE__
-# include <TargetConditionals.h>
-# if TARGET_OS_IPHONE
-#   undef SQLITE_MAX_MMAP_SIZE
-#   define SQLITE_MAX_MMAP_SIZE 0
-# endif
-#endif
-#ifndef SQLITE_MAX_MMAP_SIZE
-# if defined(__linux__) \
-  || defined(_WIN32) \
-  || (defined(__APPLE__) && defined(__MACH__)) \
-  || defined(__sun) \
-  || defined(__FreeBSD__) \
-  || defined(__DragonFly__)
-#   define SQLITE_MAX_MMAP_SIZE 0x7fff0000  /* 2147418112 */
-# else
-#   define SQLITE_MAX_MMAP_SIZE 0
-# endif
-# define SQLITE_MAX_MMAP_SIZE_xc 1 /* exclude from ctime.c */
-#endif
-
-/*
-** The default MMAP_SIZE is zero on all platforms.  Or, even if a larger
-** default MMAP_SIZE is specified at compile-time, make sure that it does
-** not exceed the maximum mmap size.
-*/
-#ifndef SQLITE_DEFAULT_MMAP_SIZE
-# define SQLITE_DEFAULT_MMAP_SIZE 0
-# define SQLITE_DEFAULT_MMAP_SIZE_xc 1  /* Exclude from ctime.c */
-#endif
-#if SQLITE_DEFAULT_MMAP_SIZE>SQLITE_MAX_MMAP_SIZE
-# undef SQLITE_DEFAULT_MMAP_SIZE
-# define SQLITE_DEFAULT_MMAP_SIZE SQLITE_MAX_MMAP_SIZE
-#endif
-
-/*
-** Only one of SQLITE_ENABLE_STAT3 or SQLITE_ENABLE_STAT4 can be defined.
-** Priority is given to SQLITE_ENABLE_STAT4.  If either are defined, also
-** define SQLITE_ENABLE_STAT3_OR_STAT4
-*/
-#ifdef SQLITE_ENABLE_STAT4
-# undef SQLITE_ENABLE_STAT3
-# define SQLITE_ENABLE_STAT3_OR_STAT4 1
-#elif SQLITE_ENABLE_STAT3
-# define SQLITE_ENABLE_STAT3_OR_STAT4 1
-#elif SQLITE_ENABLE_STAT3_OR_STAT4
-# undef SQLITE_ENABLE_STAT3_OR_STAT4
-#endif
-
-/*
-** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not
-** the Select query generator tracing logic is turned on.
-*/
-#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_SELECTTRACE)
-# define SELECTTRACE_ENABLED 1
-#else
-# define SELECTTRACE_ENABLED 0
-#endif
-
-/*
-** An instance of the following structure is used to store the busy-handler
-** callback for a given sqlite handle. 
-**
-** The sqlite.busyHandler member of the sqlite struct contains the busy
-** callback for the database handle. Each pager opened via the sqlite
-** handle is passed a pointer to sqlite.busyHandler. The busy-handler
-** callback is currently invoked only from within pager.c.
-*/
-typedef struct BusyHandler BusyHandler;
-struct BusyHandler {
-  int (*xFunc)(void *,int);  /* The busy callback */
-  void *pArg;                /* First arg to busy callback */
-  int nBusy;                 /* Incremented with each busy call */
-};
-
-/*
-** Name of the master database table.  The master database table
-** is a special table that holds the names and attributes of all
-** user tables and indices.
-*/
-#define MASTER_NAME       "sqlite_master"
-#define TEMP_MASTER_NAME  "sqlite_temp_master"
-
-/*
-** The root-page of the master database table.
-*/
-#define MASTER_ROOT       1
-
-/*
-** The name of the schema table.
-*/
-#define SCHEMA_TABLE(x)  ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME)
-
-/*
-** A convenience macro that returns the number of elements in
-** an array.
-*/
-#define ArraySize(X)    ((int)(sizeof(X)/sizeof(X[0])))
-
-/*
-** Determine if the argument is a power of two
-*/
-#define IsPowerOfTwo(X) (((X)&((X)-1))==0)
-
-/*
-** The following value as a destructor means to use sqlite3DbFree().
-** The sqlite3DbFree() routine requires two parameters instead of the 
-** one parameter that destructors normally want.  So we have to introduce 
-** this magic value that the code knows to handle differently.  Any 
-** pointer will work here as long as it is distinct from SQLITE_STATIC
-** and SQLITE_TRANSIENT.
-*/
-#define SQLITE_DYNAMIC   ((sqlite3_destructor_type)sqlite3MallocSize)
-
-/*
-** When SQLITE_OMIT_WSD is defined, it means that the target platform does
-** not support Writable Static Data (WSD) such as global and static variables.
-** All variables must either be on the stack or dynamically allocated from
-** the heap.  When WSD is unsupported, the variable declarations scattered
-** throughout the SQLite code must become constants instead.  The SQLITE_WSD
-** macro is used for this purpose.  And instead of referencing the variable
-** directly, we use its constant as a key to lookup the run-time allocated
-** buffer that holds real variable.  The constant is also the initializer
-** for the run-time allocated buffer.
-**
-** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL
-** macros become no-ops and have zero performance impact.
-*/
-#ifdef SQLITE_OMIT_WSD
-  #define SQLITE_WSD const
-  #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v)))
-  #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config)
-  int sqlite3_wsd_init(int N, int J);
-  void *sqlite3_wsd_find(void *K, int L);
-#else
-  #define SQLITE_WSD 
-  #define GLOBAL(t,v) v
-  #define sqlite3GlobalConfig sqlite3Config
-#endif
-
-/*
-** The following macros are used to suppress compiler warnings and to
-** make it clear to human readers when a function parameter is deliberately 
-** left unused within the body of a function. This usually happens when
-** a function is called via a function pointer. For example the 
-** implementation of an SQL aggregate step callback may not use the
-** parameter indicating the number of arguments passed to the aggregate,
-** if it knows that this is enforced elsewhere.
-**
-** When a function parameter is not used at all within the body of a function,
-** it is generally named "NotUsed" or "NotUsed2" to make things even clearer.
-** However, these macros may also be used to suppress warnings related to
-** parameters that may or may not be used depending on compilation options.
-** For example those parameters only used in assert() statements. In these
-** cases the parameters are named as per the usual conventions.
-*/
-#define UNUSED_PARAMETER(x) (void)(x)
-#define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y)
-
-/*
-** Forward references to structures
-*/
-typedef struct AggInfo AggInfo;
-typedef struct AuthContext AuthContext;
-typedef struct AutoincInfo AutoincInfo;
-typedef struct Bitvec Bitvec;
-typedef struct CollSeq CollSeq;
-typedef struct Column Column;
-typedef struct Db Db;
-typedef struct Schema Schema;
-typedef struct Expr Expr;
-typedef struct ExprList ExprList;
-typedef struct ExprSpan ExprSpan;
-typedef struct FKey FKey;
-typedef struct FuncDestructor FuncDestructor;
-typedef struct FuncDef FuncDef;
-typedef struct FuncDefHash FuncDefHash;
-typedef struct IdList IdList;
-typedef struct Index Index;
-typedef struct IndexSample IndexSample;
-typedef struct KeyClass KeyClass;
-typedef struct KeyInfo KeyInfo;
-typedef struct Lookaside Lookaside;
-typedef struct LookasideSlot LookasideSlot;
-typedef struct Module Module;
-typedef struct NameContext NameContext;
-typedef struct Parse Parse;
-typedef struct PrintfArguments PrintfArguments;
-typedef struct RowSet RowSet;
-typedef struct Savepoint Savepoint;
-typedef struct Select Select;
-typedef struct SQLiteThread SQLiteThread;
-typedef struct SelectDest SelectDest;
-typedef struct SrcList SrcList;
-typedef struct StrAccum StrAccum;
-typedef struct Table Table;
-typedef struct TableLock TableLock;
-typedef struct Token Token;
-typedef struct TreeView TreeView;
-typedef struct Trigger Trigger;
-typedef struct TriggerPrg TriggerPrg;
-typedef struct TriggerStep TriggerStep;
-typedef struct UnpackedRecord UnpackedRecord;
-typedef struct VTable VTable;
-typedef struct VtabCtx VtabCtx;
-typedef struct Walker Walker;
-typedef struct WhereInfo WhereInfo;
-typedef struct With With;
-
-/*
-** Defer sourcing vdbe.h and btree.h until after the "u8" and 
-** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque
-** pointer types (i.e. FuncDef) defined above.
-*/
-#include "btree.h"
-#include "vdbe.h"
-#include "pager.h"
-#include "pcache.h"
-
-#include "os.h"
-#include "mutex.h"
-
-
-/*
-** Each database file to be accessed by the system is an instance
-** of the following structure.  There are normally two of these structures
-** in the sqlite.aDb[] array.  aDb[0] is the main database file and
-** aDb[1] is the database file used to hold temporary tables.  Additional
-** databases may be attached.
-*/
-struct Db {
-  char *zName;         /* Name of this database */
-  Btree *pBt;          /* The B*Tree structure for this database file */
-  u8 safety_level;     /* How aggressive at syncing data to disk */
-  Schema *pSchema;     /* Pointer to database schema (possibly shared) */
-};
-
-/*
-** An instance of the following structure stores a database schema.
-**
-** Most Schema objects are associated with a Btree.  The exception is
-** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing.
-** In shared cache mode, a single Schema object can be shared by multiple
-** Btrees that refer to the same underlying BtShared object.
-** 
-** Schema objects are automatically deallocated when the last Btree that
-** references them is destroyed.   The TEMP Schema is manually freed by
-** sqlite3_close().
-*
-** A thread must be holding a mutex on the corresponding Btree in order
-** to access Schema content.  This implies that the thread must also be
-** holding a mutex on the sqlite3 connection pointer that owns the Btree.
-** For a TEMP Schema, only the connection mutex is required.
-*/
-struct Schema {
-  int schema_cookie;   /* Database schema version number for this file */
-  int iGeneration;     /* Generation counter.  Incremented with each change */
-  Hash tblHash;        /* All tables indexed by name */
-  Hash idxHash;        /* All (named) indices indexed by name */
-  Hash trigHash;       /* All triggers indexed by name */
-  Hash fkeyHash;       /* All foreign keys by referenced table name */
-  Table *pSeqTab;      /* The sqlite_sequence table used by AUTOINCREMENT */
-  u8 file_format;      /* Schema format version for this file */
-  u8 enc;              /* Text encoding used by this database */
-  u16 schemaFlags;     /* Flags associated with this schema */
-  int cache_size;      /* Number of pages to use in the cache */
-};
-
-/*
-** These macros can be used to test, set, or clear bits in the 
-** Db.pSchema->flags field.
-*/
-#define DbHasProperty(D,I,P)     (((D)->aDb[I].pSchema->schemaFlags&(P))==(P))
-#define DbHasAnyProperty(D,I,P)  (((D)->aDb[I].pSchema->schemaFlags&(P))!=0)
-#define DbSetProperty(D,I,P)     (D)->aDb[I].pSchema->schemaFlags|=(P)
-#define DbClearProperty(D,I,P)   (D)->aDb[I].pSchema->schemaFlags&=~(P)
-
-/*
-** Allowed values for the DB.pSchema->flags field.
-**
-** The DB_SchemaLoaded flag is set after the database schema has been
-** read into internal hash tables.
-**
-** DB_UnresetViews means that one or more views have column names that
-** have been filled out.  If the schema changes, these column names might
-** changes and so the view will need to be reset.
-*/
-#define DB_SchemaLoaded    0x0001  /* The schema has been loaded */
-#define DB_UnresetViews    0x0002  /* Some views have defined column names */
-#define DB_Empty           0x0004  /* The file is empty (length 0 bytes) */
-
-/*
-** The number of different kinds of things that can be limited
-** using the sqlite3_limit() interface.
-*/
-#define SQLITE_N_LIMIT (SQLITE_LIMIT_WORKER_THREADS+1)
-
-/*
-** Lookaside malloc is a set of fixed-size buffers that can be used
-** to satisfy small transient memory allocation requests for objects
-** associated with a particular database connection.  The use of
-** lookaside malloc provides a significant performance enhancement
-** (approx 10%) by avoiding numerous malloc/free requests while parsing
-** SQL statements.
-**
-** The Lookaside structure holds configuration information about the
-** lookaside malloc subsystem.  Each available memory allocation in
-** the lookaside subsystem is stored on a linked list of LookasideSlot
-** objects.
-**
-** Lookaside allocations are only allowed for objects that are associated
-** with a particular database connection.  Hence, schema information cannot
-** be stored in lookaside because in shared cache mode the schema information
-** is shared by multiple database connections.  Therefore, while parsing
-** schema information, the Lookaside.bEnabled flag is cleared so that
-** lookaside allocations are not used to construct the schema objects.
-*/
-struct Lookaside {
-  u16 sz;                 /* Size of each buffer in bytes */
-  u8 bEnabled;            /* False to disable new lookaside allocations */
-  u8 bMalloced;           /* True if pStart obtained from sqlite3_malloc() */
-  int nOut;               /* Number of buffers currently checked out */
-  int mxOut;              /* Highwater mark for nOut */
-  int anStat[3];          /* 0: hits.  1: size misses.  2: full misses */
-  LookasideSlot *pFree;   /* List of available buffers */
-  void *pStart;           /* First byte of available memory space */
-  void *pEnd;             /* First byte past end of available space */
-};
-struct LookasideSlot {
-  LookasideSlot *pNext;    /* Next buffer in the list of free buffers */
-};
-
-/*
-** A hash table for function definitions.
-**
-** Hash each FuncDef structure into one of the FuncDefHash.a[] slots.
-** Collisions are on the FuncDef.pHash chain.
-*/
-struct FuncDefHash {
-  FuncDef *a[23];       /* Hash table for functions */
-};
-
-#ifdef SQLITE_USER_AUTHENTICATION
-/*
-** Information held in the "sqlite3" database connection object and used
-** to manage user authentication.
-*/
-typedef struct sqlite3_userauth sqlite3_userauth;
-struct sqlite3_userauth {
-  u8 authLevel;                 /* Current authentication level */
-  int nAuthPW;                  /* Size of the zAuthPW in bytes */
-  char *zAuthPW;                /* Password used to authenticate */
-  char *zAuthUser;              /* User name used to authenticate */
-};
-
-/* Allowed values for sqlite3_userauth.authLevel */
-#define UAUTH_Unknown     0     /* Authentication not yet checked */
-#define UAUTH_Fail        1     /* User authentication failed */
-#define UAUTH_User        2     /* Authenticated as a normal user */
-#define UAUTH_Admin       3     /* Authenticated as an administrator */
-
-/* Functions used only by user authorization logic */
-int sqlite3UserAuthTable(const char*);
-int sqlite3UserAuthCheckLogin(sqlite3*,const char*,u8*);
-void sqlite3UserAuthInit(sqlite3*);
-void sqlite3CryptFunc(sqlite3_context*,int,sqlite3_value**);
-
-#endif /* SQLITE_USER_AUTHENTICATION */
-
-/*
-** typedef for the authorization callback function.
-*/
-#ifdef SQLITE_USER_AUTHENTICATION
-  typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*,
-                               const char*, const char*);
-#else
-  typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*,
-                               const char*);
-#endif
-
-
-/*
-** Each database connection is an instance of the following structure.
-*/
-struct sqlite3 {
-  sqlite3_vfs *pVfs;            /* OS Interface */
-  struct Vdbe *pVdbe;           /* List of active virtual machines */
-  CollSeq *pDfltColl;           /* The default collating sequence (BINARY) */
-  sqlite3_mutex *mutex;         /* Connection mutex */
-  Db *aDb;                      /* All backends */
-  int nDb;                      /* Number of backends currently in use */
-  int flags;                    /* Miscellaneous flags. See below */
-  i64 lastRowid;                /* ROWID of most recent insert (see above) */
-  i64 szMmap;                   /* Default mmap_size setting */
-  unsigned int openFlags;       /* Flags passed to sqlite3_vfs.xOpen() */
-  int errCode;                  /* Most recent error code (SQLITE_*) */
-  int errMask;                  /* & result codes with this before returning */
-  u16 dbOptFlags;               /* Flags to enable/disable optimizations */
-  u8 enc;                       /* Text encoding */
-  u8 autoCommit;                /* The auto-commit flag. */
-  u8 temp_store;                /* 1: file 2: memory 0: default */
-  u8 mallocFailed;              /* True if we have seen a malloc failure */
-  u8 dfltLockMode;              /* Default locking-mode for attached dbs */
-  signed char nextAutovac;      /* Autovac setting after VACUUM if >=0 */
-  u8 suppressErr;               /* Do not issue error messages if true */
-  u8 vtabOnConflict;            /* Value to return for s3_vtab_on_conflict() */
-  u8 isTransactionSavepoint;    /* True if the outermost savepoint is a TS */
-  int nextPagesize;             /* Pagesize after VACUUM if >0 */
-  u32 magic;                    /* Magic number for detect library misuse */
-  int nChange;                  /* Value returned by sqlite3_changes() */
-  int nTotalChange;             /* Value returned by sqlite3_total_changes() */
-  int aLimit[SQLITE_N_LIMIT];   /* Limits */
-  int nMaxSorterMmap;           /* Maximum size of regions mapped by sorter */
-  struct sqlite3InitInfo {      /* Information used during initialization */
-    int newTnum;                /* Rootpage of table being initialized */
-    u8 iDb;                     /* Which db file is being initialized */
-    u8 busy;                    /* TRUE if currently initializing */
-    u8 orphanTrigger;           /* Last statement is orphaned TEMP trigger */
-    u8 imposterTable;           /* Building an imposter table */
-  } init;
-  int nVdbeActive;              /* Number of VDBEs currently running */
-  int nVdbeRead;                /* Number of active VDBEs that read or write */
-  int nVdbeWrite;               /* Number of active VDBEs that read and write */
-  int nVdbeExec;                /* Number of nested calls to VdbeExec() */
-  int nVDestroy;                /* Number of active OP_VDestroy operations */
-  int nExtension;               /* Number of loaded extensions */
-  void **aExtension;            /* Array of shared library handles */
-  void (*xTrace)(void*,const char*);        /* Trace function */
-  void *pTraceArg;                          /* Argument to the trace function */
-  void (*xProfile)(void*,const char*,u64);  /* Profiling function */
-  void *pProfileArg;                        /* Argument to profile function */
-  void *pCommitArg;                 /* Argument to xCommitCallback() */   
-  int (*xCommitCallback)(void*);    /* Invoked at every commit. */
-  void *pRollbackArg;               /* Argument to xRollbackCallback() */   
-  void (*xRollbackCallback)(void*); /* Invoked at every commit. */
-  void *pUpdateArg;
-  void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64);
-#ifndef SQLITE_OMIT_WAL
-  int (*xWalCallback)(void *, sqlite3 *, const char *, int);
-  void *pWalArg;
-#endif
-  void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*);
-  void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*);
-  void *pCollNeededArg;
-  sqlite3_value *pErr;          /* Most recent error message */
-  union {
-    volatile int isInterrupted; /* True if sqlite3_interrupt has been called */
-    double notUsed1;            /* Spacer */
-  } u1;
-  Lookaside lookaside;          /* Lookaside malloc configuration */
-#ifndef SQLITE_OMIT_AUTHORIZATION
-  sqlite3_xauth xAuth;          /* Access authorization function */
-  void *pAuthArg;               /* 1st argument to the access auth function */
-#endif
-#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
-  int (*xProgress)(void *);     /* The progress callback */
-  void *pProgressArg;           /* Argument to the progress callback */
-  unsigned nProgressOps;        /* Number of opcodes for progress callback */
-#endif
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-  int nVTrans;                  /* Allocated size of aVTrans */
-  Hash aModule;                 /* populated by sqlite3_create_module() */
-  VtabCtx *pVtabCtx;            /* Context for active vtab connect/create */
-  VTable **aVTrans;             /* Virtual tables with open transactions */
-  VTable *pDisconnect;    /* Disconnect these in next sqlite3_prepare() */
-#endif
-  FuncDefHash aFunc;            /* Hash table of connection functions */
-  Hash aCollSeq;                /* All collating sequences */
-  BusyHandler busyHandler;      /* Busy callback */
-  Db aDbStatic[2];              /* Static space for the 2 default backends */
-  Savepoint *pSavepoint;        /* List of active savepoints */
-  int busyTimeout;              /* Busy handler timeout, in msec */
-  int nSavepoint;               /* Number of non-transaction savepoints */
-  int nStatement;               /* Number of nested statement-transactions  */
-  i64 nDeferredCons;            /* Net deferred constraints this transaction. */
-  i64 nDeferredImmCons;         /* Net deferred immediate constraints */
-  int *pnBytesFreed;            /* If not NULL, increment this in DbFree() */
-#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
-  /* The following variables are all protected by the STATIC_MASTER 
-  ** mutex, not by sqlite3.mutex. They are used by code in notify.c. 
-  **
-  ** When X.pUnlockConnection==Y, that means that X is waiting for Y to
-  ** unlock so that it can proceed.
-  **
-  ** When X.pBlockingConnection==Y, that means that something that X tried
-  ** tried to do recently failed with an SQLITE_LOCKED error due to locks
-  ** held by Y.
-  */
-  sqlite3 *pBlockingConnection; /* Connection that caused SQLITE_LOCKED */
-  sqlite3 *pUnlockConnection;           /* Connection to watch for unlock */
-  void *pUnlockArg;                     /* Argument to xUnlockNotify */
-  void (*xUnlockNotify)(void **, int);  /* Unlock notify callback */
-  sqlite3 *pNextBlocked;        /* Next in list of all blocked connections */
-#endif
-#ifdef SQLITE_USER_AUTHENTICATION
-  sqlite3_userauth auth;        /* User authentication information */
-#endif
-};
-
-/*
-** A macro to discover the encoding of a database.
-*/
-#define SCHEMA_ENC(db) ((db)->aDb[0].pSchema->enc)
-#define ENC(db)        ((db)->enc)
-
-/*
-** Possible values for the sqlite3.flags.
-*/
-#define SQLITE_VdbeTrace      0x00000001  /* True to trace VDBE execution */
-#define SQLITE_InternChanges  0x00000002  /* Uncommitted Hash table changes */
-#define SQLITE_FullFSync      0x00000004  /* Use full fsync on the backend */
-#define SQLITE_CkptFullFSync  0x00000008  /* Use full fsync for checkpoint */
-#define SQLITE_CacheSpill     0x00000010  /* OK to spill pager cache */
-#define SQLITE_FullColNames   0x00000020  /* Show full column names on SELECT */
-#define SQLITE_ShortColNames  0x00000040  /* Show short columns names */
-#define SQLITE_CountRows      0x00000080  /* Count rows changed by INSERT, */
-                                          /*   DELETE, or UPDATE and return */
-                                          /*   the count using a callback. */
-#define SQLITE_NullCallback   0x00000100  /* Invoke the callback once if the */
-                                          /*   result set is empty */
-#define SQLITE_SqlTrace       0x00000200  /* Debug print SQL as it executes */
-#define SQLITE_VdbeListing    0x00000400  /* Debug listings of VDBE programs */
-#define SQLITE_WriteSchema    0x00000800  /* OK to update SQLITE_MASTER */
-#define SQLITE_VdbeAddopTrace 0x00001000  /* Trace sqlite3VdbeAddOp() calls */
-#define SQLITE_IgnoreChecks   0x00002000  /* Do not enforce check constraints */
-#define SQLITE_ReadUncommitted 0x0004000  /* For shared-cache mode */
-#define SQLITE_LegacyFileFmt  0x00008000  /* Create new databases in format 1 */
-#define SQLITE_RecoveryMode   0x00010000  /* Ignore schema errors */
-#define SQLITE_ReverseOrder   0x00020000  /* Reverse unordered SELECTs */
-#define SQLITE_RecTriggers    0x00040000  /* Enable recursive triggers */
-#define SQLITE_ForeignKeys    0x00080000  /* Enforce foreign key constraints  */
-#define SQLITE_AutoIndex      0x00100000  /* Enable automatic indexes */
-#define SQLITE_PreferBuiltin  0x00200000  /* Preference to built-in funcs */
-#define SQLITE_LoadExtension  0x00400000  /* Enable load_extension */
-#define SQLITE_EnableTrigger  0x00800000  /* True to enable triggers */
-#define SQLITE_DeferFKs       0x01000000  /* Defer all FK constraints */
-#define SQLITE_QueryOnly      0x02000000  /* Disable database changes */
-#define SQLITE_VdbeEQP        0x04000000  /* Debug EXPLAIN QUERY PLAN */
-#define SQLITE_Vacuum         0x08000000  /* Currently in a VACUUM */
-#define SQLITE_CellSizeCk     0x10000000  /* Check btree cell sizes on load */
-
-
-/*
-** Bits of the sqlite3.dbOptFlags field that are used by the
-** sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS,...) interface to
-** selectively disable various optimizations.
-*/
-#define SQLITE_QueryFlattener 0x0001   /* Query flattening */
-#define SQLITE_ColumnCache    0x0002   /* Column cache */
-#define SQLITE_GroupByOrder   0x0004   /* GROUPBY cover of ORDERBY */
-#define SQLITE_FactorOutConst 0x0008   /* Constant factoring */
-/*                not used    0x0010   // Was: SQLITE_IdxRealAsInt */
-#define SQLITE_DistinctOpt    0x0020   /* DISTINCT using indexes */
-#define SQLITE_CoverIdxScan   0x0040   /* Covering index scans */
-#define SQLITE_OrderByIdxJoin 0x0080   /* ORDER BY of joins via index */
-#define SQLITE_SubqCoroutine  0x0100   /* Evaluate subqueries as coroutines */
-#define SQLITE_Transitive     0x0200   /* Transitive constraints */
-#define SQLITE_OmitNoopJoin   0x0400   /* Omit unused tables in joins */
-#define SQLITE_Stat34         0x0800   /* Use STAT3 or STAT4 data */
-#define SQLITE_CursorHints    0x2000   /* Add OP_CursorHint opcodes */
-#define SQLITE_AllOpts        0xffff   /* All optimizations */
-
-/*
-** Macros for testing whether or not optimizations are enabled or disabled.
-*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-#define OptimizationDisabled(db, mask)  (((db)->dbOptFlags&(mask))!=0)
-#define OptimizationEnabled(db, mask)   (((db)->dbOptFlags&(mask))==0)
-#else
-#define OptimizationDisabled(db, mask)  0
-#define OptimizationEnabled(db, mask)   1
-#endif
-
-/*
-** Return true if it OK to factor constant expressions into the initialization
-** code. The argument is a Parse object for the code generator.
-*/
-#define ConstFactorOk(P) ((P)->okConstFactor)
-
-/*
-** Possible values for the sqlite.magic field.
-** The numbers are obtained at random and have no special meaning, other
-** than being distinct from one another.
-*/
-#define SQLITE_MAGIC_OPEN     0xa029a697  /* Database is open */
-#define SQLITE_MAGIC_CLOSED   0x9f3c2d33  /* Database is closed */
-#define SQLITE_MAGIC_SICK     0x4b771290  /* Error and awaiting close */
-#define SQLITE_MAGIC_BUSY     0xf03b7906  /* Database currently in use */
-#define SQLITE_MAGIC_ERROR    0xb5357930  /* An SQLITE_MISUSE error occurred */
-#define SQLITE_MAGIC_ZOMBIE   0x64cffc7f  /* Close with last statement close */
-
-/*
-** Each SQL function is defined by an instance of the following
-** structure.  A pointer to this structure is stored in the sqlite.aFunc
-** hash table.  When multiple functions have the same name, the hash table
-** points to a linked list of these structures.
-*/
-struct FuncDef {
-  i16 nArg;            /* Number of arguments.  -1 means unlimited */
-  u16 funcFlags;       /* Some combination of SQLITE_FUNC_* */
-  void *pUserData;     /* User data parameter */
-  FuncDef *pNext;      /* Next function with same name */
-  void (*xFunc)(sqlite3_context*,int,sqlite3_value**); /* Regular function */
-  void (*xStep)(sqlite3_context*,int,sqlite3_value**); /* Aggregate step */
-  void (*xFinalize)(sqlite3_context*);                /* Aggregate finalizer */
-  char *zName;         /* SQL name of the function. */
-  FuncDef *pHash;      /* Next with a different name but the same hash */
-  FuncDestructor *pDestructor;   /* Reference counted destructor function */
-};
-
-/*
-** This structure encapsulates a user-function destructor callback (as
-** configured using create_function_v2()) and a reference counter. When
-** create_function_v2() is called to create a function with a destructor,
-** a single object of this type is allocated. FuncDestructor.nRef is set to 
-** the number of FuncDef objects created (either 1 or 3, depending on whether
-** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor
-** member of each of the new FuncDef objects is set to point to the allocated
-** FuncDestructor.
-**
-** Thereafter, when one of the FuncDef objects is deleted, the reference
-** count on this object is decremented. When it reaches 0, the destructor
-** is invoked and the FuncDestructor structure freed.
-*/
-struct FuncDestructor {
-  int nRef;
-  void (*xDestroy)(void *);
-  void *pUserData;
-};
-
-/*
-** Possible values for FuncDef.flags.  Note that the _LENGTH and _TYPEOF
-** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG.  And
-** SQLITE_FUNC_CONSTANT must be the same as SQLITE_DETERMINISTIC.  There
-** are assert() statements in the code to verify this.
-*/
-#define SQLITE_FUNC_ENCMASK  0x0003 /* SQLITE_UTF8, SQLITE_UTF16BE or UTF16LE */
-#define SQLITE_FUNC_LIKE     0x0004 /* Candidate for the LIKE optimization */
-#define SQLITE_FUNC_CASE     0x0008 /* Case-sensitive LIKE-type function */
-#define SQLITE_FUNC_EPHEM    0x0010 /* Ephemeral.  Delete with VDBE */
-#define SQLITE_FUNC_NEEDCOLL 0x0020 /* sqlite3GetFuncCollSeq() might be called*/
-#define SQLITE_FUNC_LENGTH   0x0040 /* Built-in length() function */
-#define SQLITE_FUNC_TYPEOF   0x0080 /* Built-in typeof() function */
-#define SQLITE_FUNC_COUNT    0x0100 /* Built-in count(*) aggregate */
-#define SQLITE_FUNC_COALESCE 0x0200 /* Built-in coalesce() or ifnull() */
-#define SQLITE_FUNC_UNLIKELY 0x0400 /* Built-in unlikely() function */
-#define SQLITE_FUNC_CONSTANT 0x0800 /* Constant inputs give a constant output */
-#define SQLITE_FUNC_MINMAX   0x1000 /* True for min() and max() aggregates */
-#define SQLITE_FUNC_SLOCHNG  0x2000 /* "Slow Change". Value constant during a
-                                    ** single query - might change over time */
-
-/*
-** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are
-** used to create the initializers for the FuncDef structures.
-**
-**   FUNCTION(zName, nArg, iArg, bNC, xFunc)
-**     Used to create a scalar function definition of a function zName 
-**     implemented by C function xFunc that accepts nArg arguments. The
-**     value passed as iArg is cast to a (void*) and made available
-**     as the user-data (sqlite3_user_data()) for the function. If 
-**     argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set.
-**
-**   VFUNCTION(zName, nArg, iArg, bNC, xFunc)
-**     Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag.
-**
-**   DFUNCTION(zName, nArg, iArg, bNC, xFunc)
-**     Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag and
-**     adds the SQLITE_FUNC_SLOCHNG flag.  Used for date & time functions
-**     and functions like sqlite_version() that can change, but not during
-**     a single query.
-**
-**   AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal)
-**     Used to create an aggregate function definition implemented by
-**     the C functions xStep and xFinal. The first four parameters
-**     are interpreted in the same way as the first 4 parameters to
-**     FUNCTION().
-**
-**   LIKEFUNC(zName, nArg, pArg, flags)
-**     Used to create a scalar function definition of a function zName 
-**     that accepts nArg arguments and is implemented by a call to C 
-**     function likeFunc. Argument pArg is cast to a (void *) and made
-**     available as the function user-data (sqlite3_user_data()). The
-**     FuncDef.flags variable is set to the value passed as the flags
-**     parameter.
-*/
-#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \
-  {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
-   SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
-#define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \
-  {nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
-   SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
-#define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \
-  {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
-   SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
-#define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \
-  {nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\
-   SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0}
-#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \
-  {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
-   pArg, 0, xFunc, 0, 0, #zName, 0, 0}
-#define LIKEFUNC(zName, nArg, arg, flags) \
-  {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \
-   (void *)arg, 0, likeFunc, 0, 0, #zName, 0, 0}
-#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \
-  {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \
-   SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0}
-#define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \
-  {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \
-   SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0}
-
-/*
-** All current savepoints are stored in a linked list starting at
-** sqlite3.pSavepoint. The first element in the list is the most recently
-** opened savepoint. Savepoints are added to the list by the vdbe
-** OP_Savepoint instruction.
-*/
-struct Savepoint {
-  char *zName;                        /* Savepoint name (nul-terminated) */
-  i64 nDeferredCons;                  /* Number of deferred fk violations */
-  i64 nDeferredImmCons;               /* Number of deferred imm fk. */
-  Savepoint *pNext;                   /* Parent savepoint (if any) */
-};
-
-/*
-** The following are used as the second parameter to sqlite3Savepoint(),
-** and as the P1 argument to the OP_Savepoint instruction.
-*/
-#define SAVEPOINT_BEGIN      0
-#define SAVEPOINT_RELEASE    1
-#define SAVEPOINT_ROLLBACK   2
-
-
-/*
-** Each SQLite module (virtual table definition) is defined by an
-** instance of the following structure, stored in the sqlite3.aModule
-** hash table.
-*/
-struct Module {
-  const sqlite3_module *pModule;       /* Callback pointers */
-  const char *zName;                   /* Name passed to create_module() */
-  void *pAux;                          /* pAux passed to create_module() */
-  void (*xDestroy)(void *);            /* Module destructor function */
-  Table *pEpoTab;                      /* Eponymous table for this module */
-};
-
-/*
-** information about each column of an SQL table is held in an instance
-** of this structure.
-*/
-struct Column {
-  char *zName;     /* Name of this column */
-  Expr *pDflt;     /* Default value of this column */
-  char *zDflt;     /* Original text of the default value */
-  char *zType;     /* Data type for this column */
-  char *zColl;     /* Collating sequence.  If NULL, use the default */
-  u8 notNull;      /* An OE_ code for handling a NOT NULL constraint */
-  char affinity;   /* One of the SQLITE_AFF_... values */
-  u8 szEst;        /* Estimated size of value in this column. sizeof(INT)==1 */
-  u8 colFlags;     /* Boolean properties.  See COLFLAG_ defines below */
-};
-
-/* Allowed values for Column.colFlags:
-*/
-#define COLFLAG_PRIMKEY  0x0001    /* Column is part of the primary key */
-#define COLFLAG_HIDDEN   0x0002    /* A hidden column in a virtual table */
-
-/*
-** A "Collating Sequence" is defined by an instance of the following
-** structure. Conceptually, a collating sequence consists of a name and
-** a comparison routine that defines the order of that sequence.
-**
-** If CollSeq.xCmp is NULL, it means that the
-** collating sequence is undefined.  Indices built on an undefined
-** collating sequence may not be read or written.
-*/
-struct CollSeq {
-  char *zName;          /* Name of the collating sequence, UTF-8 encoded */
-  u8 enc;               /* Text encoding handled by xCmp() */
-  void *pUser;          /* First argument to xCmp() */
-  int (*xCmp)(void*,int, const void*, int, const void*);
-  void (*xDel)(void*);  /* Destructor for pUser */
-};
-
-/*
-** A sort order can be either ASC or DESC.
-*/
-#define SQLITE_SO_ASC       0  /* Sort in ascending order */
-#define SQLITE_SO_DESC      1  /* Sort in ascending order */
-#define SQLITE_SO_UNDEFINED -1 /* No sort order specified */
-
-/*
-** Column affinity types.
-**
-** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and
-** 't' for SQLITE_AFF_TEXT.  But we can save a little space and improve
-** the speed a little by numbering the values consecutively.  
-**
-** But rather than start with 0 or 1, we begin with 'A'.  That way,
-** when multiple affinity types are concatenated into a string and
-** used as the P4 operand, they will be more readable.
-**
-** Note also that the numeric types are grouped together so that testing
-** for a numeric type is a single comparison.  And the BLOB type is first.
-*/
-#define SQLITE_AFF_BLOB     'A'
-#define SQLITE_AFF_TEXT     'B'
-#define SQLITE_AFF_NUMERIC  'C'
-#define SQLITE_AFF_INTEGER  'D'
-#define SQLITE_AFF_REAL     'E'
-
-#define sqlite3IsNumericAffinity(X)  ((X)>=SQLITE_AFF_NUMERIC)
-
-/*
-** The SQLITE_AFF_MASK values masks off the significant bits of an
-** affinity value. 
-*/
-#define SQLITE_AFF_MASK     0x47
-
-/*
-** Additional bit values that can be ORed with an affinity without
-** changing the affinity.
-**
-** The SQLITE_NOTNULL flag is a combination of NULLEQ and JUMPIFNULL.
-** It causes an assert() to fire if either operand to a comparison
-** operator is NULL.  It is added to certain comparison operators to
-** prove that the operands are always NOT NULL.
-*/
-#define SQLITE_JUMPIFNULL   0x10  /* jumps if either operand is NULL */
-#define SQLITE_STOREP2      0x20  /* Store result in reg[P2] rather than jump */
-#define SQLITE_NULLEQ       0x80  /* NULL=NULL */
-#define SQLITE_NOTNULL      0x90  /* Assert that operands are never NULL */
-
-/*
-** An object of this type is created for each virtual table present in
-** the database schema. 
-**
-** If the database schema is shared, then there is one instance of this
-** structure for each database connection (sqlite3*) that uses the shared
-** schema. This is because each database connection requires its own unique
-** instance of the sqlite3_vtab* handle used to access the virtual table 
-** implementation. sqlite3_vtab* handles can not be shared between 
-** database connections, even when the rest of the in-memory database 
-** schema is shared, as the implementation often stores the database
-** connection handle passed to it via the xConnect() or xCreate() method
-** during initialization internally. This database connection handle may
-** then be used by the virtual table implementation to access real tables 
-** within the database. So that they appear as part of the callers 
-** transaction, these accesses need to be made via the same database 
-** connection as that used to execute SQL operations on the virtual table.
-**
-** All VTable objects that correspond to a single table in a shared
-** database schema are initially stored in a linked-list pointed to by
-** the Table.pVTable member variable of the corresponding Table object.
-** When an sqlite3_prepare() operation is required to access the virtual
-** table, it searches the list for the VTable that corresponds to the
-** database connection doing the preparing so as to use the correct
-** sqlite3_vtab* handle in the compiled query.
-**
-** When an in-memory Table object is deleted (for example when the
-** schema is being reloaded for some reason), the VTable objects are not 
-** deleted and the sqlite3_vtab* handles are not xDisconnect()ed 
-** immediately. Instead, they are moved from the Table.pVTable list to
-** another linked list headed by the sqlite3.pDisconnect member of the
-** corresponding sqlite3 structure. They are then deleted/xDisconnected 
-** next time a statement is prepared using said sqlite3*. This is done
-** to avoid deadlock issues involving multiple sqlite3.mutex mutexes.
-** Refer to comments above function sqlite3VtabUnlockList() for an
-** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect
-** list without holding the corresponding sqlite3.mutex mutex.
-**
-** The memory for objects of this type is always allocated by 
-** sqlite3DbMalloc(), using the connection handle stored in VTable.db as 
-** the first argument.
-*/
-struct VTable {
-  sqlite3 *db;              /* Database connection associated with this table */
-  Module *pMod;             /* Pointer to module implementation */
-  sqlite3_vtab *pVtab;      /* Pointer to vtab instance */
-  int nRef;                 /* Number of pointers to this structure */
-  u8 bConstraint;           /* True if constraints are supported */
-  int iSavepoint;           /* Depth of the SAVEPOINT stack */
-  VTable *pNext;            /* Next in linked list (see above) */
-};
-
-/*
-** The schema for each SQL table and view is represented in memory
-** by an instance of the following structure.
-*/
-struct Table {
-  char *zName;         /* Name of the table or view */
-  Column *aCol;        /* Information about each column */
-  Index *pIndex;       /* List of SQL indexes on this table. */
-  Select *pSelect;     /* NULL for tables.  Points to definition if a view. */
-  FKey *pFKey;         /* Linked list of all foreign keys in this table */
-  char *zColAff;       /* String defining the affinity of each column */
-  ExprList *pCheck;    /* All CHECK constraints */
-                       /*   ... also used as column name list in a VIEW */
-  int tnum;            /* Root BTree page for this table */
-  i16 iPKey;           /* If not negative, use aCol[iPKey] as the rowid */
-  i16 nCol;            /* Number of columns in this table */
-  u16 nRef;            /* Number of pointers to this Table */
-  LogEst nRowLogEst;   /* Estimated rows in table - from sqlite_stat1 table */
-  LogEst szTabRow;     /* Estimated size of each table row in bytes */
-#ifdef SQLITE_ENABLE_COSTMULT
-  LogEst costMult;     /* Cost multiplier for using this table */
-#endif
-  u8 tabFlags;         /* Mask of TF_* values */
-  u8 keyConf;          /* What to do in case of uniqueness conflict on iPKey */
-#ifndef SQLITE_OMIT_ALTERTABLE
-  int addColOffset;    /* Offset in CREATE TABLE stmt to add a new column */
-#endif
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-  int nModuleArg;      /* Number of arguments to the module */
-  char **azModuleArg;  /* 0: module 1: schema 2: vtab name 3...: args */
-  VTable *pVTable;     /* List of VTable objects. */
-#endif
-  Trigger *pTrigger;   /* List of triggers stored in pSchema */
-  Schema *pSchema;     /* Schema that contains this table */
-  Table *pNextZombie;  /* Next on the Parse.pZombieTab list */
-};
-
-/*
-** Allowed values for Table.tabFlags.
-**
-** TF_OOOHidden applies to tables or view that have hidden columns that are
-** followed by non-hidden columns.  Example:  "CREATE VIRTUAL TABLE x USING
-** vtab1(a HIDDEN, b);".  Since "b" is a non-hidden column but "a" is hidden,
-** the TF_OOOHidden attribute would apply in this case.  Such tables require
-** special handling during INSERT processing.
-*/
-#define TF_Readonly        0x01    /* Read-only system table */
-#define TF_Ephemeral       0x02    /* An ephemeral table */
-#define TF_HasPrimaryKey   0x04    /* Table has a primary key */
-#define TF_Autoincrement   0x08    /* Integer primary key is autoincrement */
-#define TF_Virtual         0x10    /* Is a virtual table */
-#define TF_WithoutRowid    0x20    /* No rowid.  PRIMARY KEY is the key */
-#define TF_NoVisibleRowid  0x40    /* No user-visible "rowid" column */
-#define TF_OOOHidden       0x80    /* Out-of-Order hidden columns */
-
-
-/*
-** Test to see whether or not a table is a virtual table.  This is
-** done as a macro so that it will be optimized out when virtual
-** table support is omitted from the build.
-*/
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-#  define IsVirtual(X)      (((X)->tabFlags & TF_Virtual)!=0)
-#else
-#  define IsVirtual(X)      0
-#endif
-
-/*
-** Macros to determine if a column is hidden.  IsOrdinaryHiddenColumn()
-** only works for non-virtual tables (ordinary tables and views) and is
-** always false unless SQLITE_ENABLE_HIDDEN_COLUMNS is defined.  The
-** IsHiddenColumn() macro is general purpose.
-*/
-#if defined(SQLITE_ENABLE_HIDDEN_COLUMNS)
-#  define IsHiddenColumn(X)         (((X)->colFlags & COLFLAG_HIDDEN)!=0)
-#  define IsOrdinaryHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
-#elif !defined(SQLITE_OMIT_VIRTUALTABLE)
-#  define IsHiddenColumn(X)         (((X)->colFlags & COLFLAG_HIDDEN)!=0)
-#  define IsOrdinaryHiddenColumn(X) 0
-#else
-#  define IsHiddenColumn(X)         0
-#  define IsOrdinaryHiddenColumn(X) 0
-#endif
-
-
-/* Does the table have a rowid */
-#define HasRowid(X)     (((X)->tabFlags & TF_WithoutRowid)==0)
-#define VisibleRowid(X) (((X)->tabFlags & TF_NoVisibleRowid)==0)
-
-/*
-** Each foreign key constraint is an instance of the following structure.
-**
-** A foreign key is associated with two tables.  The "from" table is
-** the table that contains the REFERENCES clause that creates the foreign
-** key.  The "to" table is the table that is named in the REFERENCES clause.
-** Consider this example:
-**
-**     CREATE TABLE ex1(
-**       a INTEGER PRIMARY KEY,
-**       b INTEGER CONSTRAINT fk1 REFERENCES ex2(x)
-**     );
-**
-** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2".
-** Equivalent names:
-**
-**     from-table == child-table
-**       to-table == parent-table
-**
-** Each REFERENCES clause generates an instance of the following structure
-** which is attached to the from-table.  The to-table need not exist when
-** the from-table is created.  The existence of the to-table is not checked.
-**
-** The list of all parents for child Table X is held at X.pFKey.
-**
-** A list of all children for a table named Z (which might not even exist)
-** is held in Schema.fkeyHash with a hash key of Z.
-*/
-struct FKey {
-  Table *pFrom;     /* Table containing the REFERENCES clause (aka: Child) */
-  FKey *pNextFrom;  /* Next FKey with the same in pFrom. Next parent of pFrom */
-  char *zTo;        /* Name of table that the key points to (aka: Parent) */
-  FKey *pNextTo;    /* Next with the same zTo. Next child of zTo. */
-  FKey *pPrevTo;    /* Previous with the same zTo */
-  int nCol;         /* Number of columns in this key */
-  /* EV: R-30323-21917 */
-  u8 isDeferred;       /* True if constraint checking is deferred till COMMIT */
-  u8 aAction[2];        /* ON DELETE and ON UPDATE actions, respectively */
-  Trigger *apTrigger[2];/* Triggers for aAction[] actions */
-  struct sColMap {      /* Mapping of columns in pFrom to columns in zTo */
-    int iFrom;            /* Index of column in pFrom */
-    char *zCol;           /* Name of column in zTo.  If NULL use PRIMARY KEY */
-  } aCol[1];            /* One entry for each of nCol columns */
-};
-
-/*
-** SQLite supports many different ways to resolve a constraint
-** error.  ROLLBACK processing means that a constraint violation
-** causes the operation in process to fail and for the current transaction
-** to be rolled back.  ABORT processing means the operation in process
-** fails and any prior changes from that one operation are backed out,
-** but the transaction is not rolled back.  FAIL processing means that
-** the operation in progress stops and returns an error code.  But prior
-** changes due to the same operation are not backed out and no rollback
-** occurs.  IGNORE means that the particular row that caused the constraint
-** error is not inserted or updated.  Processing continues and no error
-** is returned.  REPLACE means that preexisting database rows that caused
-** a UNIQUE constraint violation are removed so that the new insert or
-** update can proceed.  Processing continues and no error is reported.
-**
-** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys.
-** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the
-** same as ROLLBACK for DEFERRED keys.  SETNULL means that the foreign
-** key is set to NULL.  CASCADE means that a DELETE or UPDATE of the
-** referenced table row is propagated into the row that holds the
-** foreign key.
-** 
-** The following symbolic values are used to record which type
-** of action to take.
-*/
-#define OE_None     0   /* There is no constraint to check */
-#define OE_Rollback 1   /* Fail the operation and rollback the transaction */
-#define OE_Abort    2   /* Back out changes but do no rollback transaction */
-#define OE_Fail     3   /* Stop the operation but leave all prior changes */
-#define OE_Ignore   4   /* Ignore the error. Do not do the INSERT or UPDATE */
-#define OE_Replace  5   /* Delete existing record, then do INSERT or UPDATE */
-
-#define OE_Restrict 6   /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */
-#define OE_SetNull  7   /* Set the foreign key value to NULL */
-#define OE_SetDflt  8   /* Set the foreign key value to its default */
-#define OE_Cascade  9   /* Cascade the changes */
-
-#define OE_Default  10  /* Do whatever the default action is */
-
-
-/*
-** An instance of the following structure is passed as the first
-** argument to sqlite3VdbeKeyCompare and is used to control the 
-** comparison of the two index keys.
-**
-** Note that aSortOrder[] and aColl[] have nField+1 slots.  There
-** are nField slots for the columns of an index then one extra slot
-** for the rowid at the end.
-*/
-struct KeyInfo {
-  u32 nRef;           /* Number of references to this KeyInfo object */
-  u8 enc;             /* Text encoding - one of the SQLITE_UTF* values */
-  u16 nField;         /* Number of key columns in the index */
-  u16 nXField;        /* Number of columns beyond the key columns */
-  sqlite3 *db;        /* The database connection */
-  u8 *aSortOrder;     /* Sort order for each column. */
-  CollSeq *aColl[1];  /* Collating sequence for each term of the key */
-};
-
-/*
-** This object holds a record which has been parsed out into individual
-** fields, for the purposes of doing a comparison.
-**
-** A record is an object that contains one or more fields of data.
-** Records are used to store the content of a table row and to store
-** the key of an index.  A blob encoding of a record is created by
-** the OP_MakeRecord opcode of the VDBE and is disassembled by the
-** OP_Column opcode.
-**
-** An instance of this object serves as a "key" for doing a search on
-** an index b+tree. The goal of the search is to find the entry that
-** is closed to the key described by this object.  This object might hold
-** just a prefix of the key.  The number of fields is given by
-** pKeyInfo->nField.
-**
-** The r1 and r2 fields are the values to return if this key is less than
-** or greater than a key in the btree, respectively.  These are normally
-** -1 and +1 respectively, but might be inverted to +1 and -1 if the b-tree
-** is in DESC order.
-**
-** The key comparison functions actually return default_rc when they find
-** an equals comparison.  default_rc can be -1, 0, or +1.  If there are
-** multiple entries in the b-tree with the same key (when only looking
-** at the first pKeyInfo->nFields,) then default_rc can be set to -1 to 
-** cause the search to find the last match, or +1 to cause the search to
-** find the first match.
-**
-** The key comparison functions will set eqSeen to true if they ever
-** get and equal results when comparing this structure to a b-tree record.
-** When default_rc!=0, the search might end up on the record immediately
-** before the first match or immediately after the last match.  The
-** eqSeen field will indicate whether or not an exact match exists in the
-** b-tree.
-*/
-struct UnpackedRecord {
-  KeyInfo *pKeyInfo;  /* Collation and sort-order information */
-  Mem *aMem;          /* Values */
-  u16 nField;         /* Number of entries in apMem[] */
-  i8 default_rc;      /* Comparison result if keys are equal */
-  u8 errCode;         /* Error detected by xRecordCompare (CORRUPT or NOMEM) */
-  i8 r1;              /* Value to return if (lhs > rhs) */
-  i8 r2;              /* Value to return if (rhs < lhs) */
-  u8 eqSeen;          /* True if an equality comparison has been seen */
-};
-
-
-/*
-** Each SQL index is represented in memory by an
-** instance of the following structure.
-**
-** The columns of the table that are to be indexed are described
-** by the aiColumn[] field of this structure.  For example, suppose
-** we have the following table and index:
-**
-**     CREATE TABLE Ex1(c1 int, c2 int, c3 text);
-**     CREATE INDEX Ex2 ON Ex1(c3,c1);
-**
-** In the Table structure describing Ex1, nCol==3 because there are
-** three columns in the table.  In the Index structure describing
-** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed.
-** The value of aiColumn is {2, 0}.  aiColumn[0]==2 because the 
-** first column to be indexed (c3) has an index of 2 in Ex1.aCol[].
-** The second column to be indexed (c1) has an index of 0 in
-** Ex1.aCol[], hence Ex2.aiColumn[1]==0.
-**
-** The Index.onError field determines whether or not the indexed columns
-** must be unique and what to do if they are not.  When Index.onError=OE_None,
-** it means this is not a unique index.  Otherwise it is a unique index
-** and the value of Index.onError indicate the which conflict resolution 
-** algorithm to employ whenever an attempt is made to insert a non-unique
-** element.
-**
-** While parsing a CREATE TABLE or CREATE INDEX statement in order to
-** generate VDBE code (as opposed to parsing one read from an sqlite_master
-** table as part of parsing an existing database schema), transient instances
-** of this structure may be created. In this case the Index.tnum variable is
-** used to store the address of a VDBE instruction, not a database page
-** number (it cannot - the database page is not allocated until the VDBE
-** program is executed). See convertToWithoutRowidTable() for details.
-*/
-struct Index {
-  char *zName;             /* Name of this index */
-  i16 *aiColumn;           /* Which columns are used by this index.  1st is 0 */
-  LogEst *aiRowLogEst;     /* From ANALYZE: Est. rows selected by each column */
-  Table *pTable;           /* The SQL table being indexed */
-  char *zColAff;           /* String defining the affinity of each column */
-  Index *pNext;            /* The next index associated with the same table */
-  Schema *pSchema;         /* Schema containing this index */
-  u8 *aSortOrder;          /* for each column: True==DESC, False==ASC */
-  const char **azColl;     /* Array of collation sequence names for index */
-  Expr *pPartIdxWhere;     /* WHERE clause for partial indices */
-  ExprList *aColExpr;      /* Column expressions */
-  int tnum;                /* DB Page containing root of this index */
-  LogEst szIdxRow;         /* Estimated average row size in bytes */
-  u16 nKeyCol;             /* Number of columns forming the key */
-  u16 nColumn;             /* Number of columns stored in the index */
-  u8 onError;              /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */
-  unsigned idxType:2;      /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */
-  unsigned bUnordered:1;   /* Use this index for == or IN queries only */
-  unsigned uniqNotNull:1;  /* True if UNIQUE and NOT NULL for all columns */
-  unsigned isResized:1;    /* True if resizeIndexObject() has been called */
-  unsigned isCovering:1;   /* True if this is a covering index */
-  unsigned noSkipScan:1;   /* Do not try to use skip-scan if true */
-#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
-  int nSample;             /* Number of elements in aSample[] */
-  int nSampleCol;          /* Size of IndexSample.anEq[] and so on */
-  tRowcnt *aAvgEq;         /* Average nEq values for keys not in aSample */
-  IndexSample *aSample;    /* Samples of the left-most key */
-  tRowcnt *aiRowEst;       /* Non-logarithmic stat1 data for this index */
-  tRowcnt nRowEst0;        /* Non-logarithmic number of rows in the index */
-#endif
-};
-
-/*
-** Allowed values for Index.idxType
-*/
-#define SQLITE_IDXTYPE_APPDEF      0   /* Created using CREATE INDEX */
-#define SQLITE_IDXTYPE_UNIQUE      1   /* Implements a UNIQUE constraint */
-#define SQLITE_IDXTYPE_PRIMARYKEY  2   /* Is the PRIMARY KEY for the table */
-
-/* Return true if index X is a PRIMARY KEY index */
-#define IsPrimaryKeyIndex(X)  ((X)->idxType==SQLITE_IDXTYPE_PRIMARYKEY)
-
-/* Return true if index X is a UNIQUE index */
-#define IsUniqueIndex(X)      ((X)->onError!=OE_None)
-
-/* The Index.aiColumn[] values are normally positive integer.  But
-** there are some negative values that have special meaning:
-*/
-#define XN_ROWID     (-1)     /* Indexed column is the rowid */
-#define XN_EXPR      (-2)     /* Indexed column is an expression */
-
-/*
-** Each sample stored in the sqlite_stat3 table is represented in memory 
-** using a structure of this type.  See documentation at the top of the
-** analyze.c source file for additional information.
-*/
-struct IndexSample {
-  void *p;          /* Pointer to sampled record */
-  int n;            /* Size of record in bytes */
-  tRowcnt *anEq;    /* Est. number of rows where the key equals this sample */
-  tRowcnt *anLt;    /* Est. number of rows where key is less than this sample */
-  tRowcnt *anDLt;   /* Est. number of distinct keys less than this sample */
-};
-
-/*
-** Each token coming out of the lexer is an instance of
-** this structure.  Tokens are also used as part of an expression.
-**
-** Note if Token.z==0 then Token.dyn and Token.n are undefined and
-** may contain random values.  Do not make any assumptions about Token.dyn
-** and Token.n when Token.z==0.
-*/
-struct Token {
-  const char *z;     /* Text of the token.  Not NULL-terminated! */
-  unsigned int n;    /* Number of characters in this token */
-};
-
-/*
-** An instance of this structure contains information needed to generate
-** code for a SELECT that contains aggregate functions.
-**
-** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a
-** pointer to this structure.  The Expr.iColumn field is the index in
-** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate
-** code for that node.
-**
-** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the
-** original Select structure that describes the SELECT statement.  These
-** fields do not need to be freed when deallocating the AggInfo structure.
-*/
-struct AggInfo {
-  u8 directMode;          /* Direct rendering mode means take data directly
-                          ** from source tables rather than from accumulators */
-  u8 useSortingIdx;       /* In direct mode, reference the sorting index rather
-                          ** than the source table */
-  int sortingIdx;         /* Cursor number of the sorting index */
-  int sortingIdxPTab;     /* Cursor number of pseudo-table */
-  int nSortingColumn;     /* Number of columns in the sorting index */
-  int mnReg, mxReg;       /* Range of registers allocated for aCol and aFunc */
-  ExprList *pGroupBy;     /* The group by clause */
-  struct AggInfo_col {    /* For each column used in source tables */
-    Table *pTab;             /* Source table */
-    int iTable;              /* Cursor number of the source table */
-    int iColumn;             /* Column number within the source table */
-    int iSorterColumn;       /* Column number in the sorting index */
-    int iMem;                /* Memory location that acts as accumulator */
-    Expr *pExpr;             /* The original expression */
-  } *aCol;
-  int nColumn;            /* Number of used entries in aCol[] */
-  int nAccumulator;       /* Number of columns that show through to the output.
-                          ** Additional columns are used only as parameters to
-                          ** aggregate functions */
-  struct AggInfo_func {   /* For each aggregate function */
-    Expr *pExpr;             /* Expression encoding the function */
-    FuncDef *pFunc;          /* The aggregate function implementation */
-    int iMem;                /* Memory location that acts as accumulator */
-    int iDistinct;           /* Ephemeral table used to enforce DISTINCT */
-  } *aFunc;
-  int nFunc;              /* Number of entries in aFunc[] */
-};
-
-/*
-** The datatype ynVar is a signed integer, either 16-bit or 32-bit.
-** Usually it is 16-bits.  But if SQLITE_MAX_VARIABLE_NUMBER is greater
-** than 32767 we have to make it 32-bit.  16-bit is preferred because
-** it uses less memory in the Expr object, which is a big memory user
-** in systems with lots of prepared statements.  And few applications
-** need more than about 10 or 20 variables.  But some extreme users want
-** to have prepared statements with over 32767 variables, and for them
-** the option is available (at compile-time).
-*/
-#if SQLITE_MAX_VARIABLE_NUMBER<=32767
-typedef i16 ynVar;
-#else
-typedef int ynVar;
-#endif
-
-/*
-** Each node of an expression in the parse tree is an instance
-** of this structure.
-**
-** Expr.op is the opcode. The integer parser token codes are reused
-** as opcodes here. For example, the parser defines TK_GE to be an integer
-** code representing the ">=" operator. This same integer code is reused
-** to represent the greater-than-or-equal-to operator in the expression
-** tree.
-**
-** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB, 
-** or TK_STRING), then Expr.token contains the text of the SQL literal. If
-** the expression is a variable (TK_VARIABLE), then Expr.token contains the 
-** variable name. Finally, if the expression is an SQL function (TK_FUNCTION),
-** then Expr.token contains the name of the function.
-**
-** Expr.pRight and Expr.pLeft are the left and right subexpressions of a
-** binary operator. Either or both may be NULL.
-**
-** Expr.x.pList is a list of arguments if the expression is an SQL function,
-** a CASE expression or an IN expression of the form "<lhs> IN (<y>, <z>...)".
-** Expr.x.pSelect is used if the expression is a sub-select or an expression of
-** the form "<lhs> IN (SELECT ...)". If the EP_xIsSelect bit is set in the
-** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is 
-** valid.
-**
-** An expression of the form ID or ID.ID refers to a column in a table.
-** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is
-** the integer cursor number of a VDBE cursor pointing to that table and
-** Expr.iColumn is the column number for the specific column.  If the
-** expression is used as a result in an aggregate SELECT, then the
-** value is also stored in the Expr.iAgg column in the aggregate so that
-** it can be accessed after all aggregates are computed.
-**
-** If the expression is an unbound variable marker (a question mark 
-** character '?' in the original SQL) then the Expr.iTable holds the index 
-** number for that variable.
-**
-** If the expression is a subquery then Expr.iColumn holds an integer
-** register number containing the result of the subquery.  If the
-** subquery gives a constant result, then iTable is -1.  If the subquery
-** gives a different answer at different times during statement processing
-** then iTable is the address of a subroutine that computes the subquery.
-**
-** If the Expr is of type OP_Column, and the table it is selecting from
-** is a disk table or the "old.*" pseudo-table, then pTab points to the
-** corresponding table definition.
-**
-** ALLOCATION NOTES:
-**
-** Expr objects can use a lot of memory space in database schema.  To
-** help reduce memory requirements, sometimes an Expr object will be
-** truncated.  And to reduce the number of memory allocations, sometimes
-** two or more Expr objects will be stored in a single memory allocation,
-** together with Expr.zToken strings.
-**
-** If the EP_Reduced and EP_TokenOnly flags are set when
-** an Expr object is truncated.  When EP_Reduced is set, then all
-** the child Expr objects in the Expr.pLeft and Expr.pRight subtrees
-** are contained within the same memory allocation.  Note, however, that
-** the subtrees in Expr.x.pList or Expr.x.pSelect are always separately
-** allocated, regardless of whether or not EP_Reduced is set.
-*/
-struct Expr {
-  u8 op;                 /* Operation performed by this node */
-  char affinity;         /* The affinity of the column or 0 if not a column */
-  u32 flags;             /* Various flags.  EP_* See below */
-  union {
-    char *zToken;          /* Token value. Zero terminated and dequoted */
-    int iValue;            /* Non-negative integer value if EP_IntValue */
-  } u;
-
-  /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no
-  ** space is allocated for the fields below this point. An attempt to
-  ** access them will result in a segfault or malfunction. 
-  *********************************************************************/
-
-  Expr *pLeft;           /* Left subnode */
-  Expr *pRight;          /* Right subnode */
-  union {
-    ExprList *pList;     /* op = IN, EXISTS, SELECT, CASE, FUNCTION, BETWEEN */
-    Select *pSelect;     /* EP_xIsSelect and op = IN, EXISTS, SELECT */
-  } x;
-
-  /* If the EP_Reduced flag is set in the Expr.flags mask, then no
-  ** space is allocated for the fields below this point. An attempt to
-  ** access them will result in a segfault or malfunction.
-  *********************************************************************/
-
-#if SQLITE_MAX_EXPR_DEPTH>0
-  int nHeight;           /* Height of the tree headed by this node */
-#endif
-  int iTable;            /* TK_COLUMN: cursor number of table holding column
-                         ** TK_REGISTER: register number
-                         ** TK_TRIGGER: 1 -> new, 0 -> old
-                         ** EP_Unlikely:  134217728 times likelihood */
-  ynVar iColumn;         /* TK_COLUMN: column index.  -1 for rowid.
-                         ** TK_VARIABLE: variable number (always >= 1). */
-  i16 iAgg;              /* Which entry in pAggInfo->aCol[] or ->aFunc[] */
-  i16 iRightJoinTable;   /* If EP_FromJoin, the right table of the join */
-  u8 op2;                /* TK_REGISTER: original value of Expr.op
-                         ** TK_COLUMN: the value of p5 for OP_Column
-                         ** TK_AGG_FUNCTION: nesting depth */
-  AggInfo *pAggInfo;     /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */
-  Table *pTab;           /* Table for TK_COLUMN expressions. */
-};
-
-/*
-** The following are the meanings of bits in the Expr.flags field.
-*/
-#define EP_FromJoin  0x000001 /* Originates in ON/USING clause of outer join */
-#define EP_Agg       0x000002 /* Contains one or more aggregate functions */
-#define EP_Resolved  0x000004 /* IDs have been resolved to COLUMNs */
-#define EP_Error     0x000008 /* Expression contains one or more errors */
-#define EP_Distinct  0x000010 /* Aggregate function with DISTINCT keyword */
-#define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */
-#define EP_DblQuoted 0x000040 /* token.z was originally in "..." */
-#define EP_InfixFunc 0x000080 /* True for an infix function: LIKE, GLOB, etc */
-#define EP_Collate   0x000100 /* Tree contains a TK_COLLATE operator */
-#define EP_Generic   0x000200 /* Ignore COLLATE or affinity on this tree */
-#define EP_IntValue  0x000400 /* Integer value contained in u.iValue */
-#define EP_xIsSelect 0x000800 /* x.pSelect is valid (otherwise x.pList is) */
-#define EP_Skip      0x001000 /* COLLATE, AS, or UNLIKELY */
-#define EP_Reduced   0x002000 /* Expr struct EXPR_REDUCEDSIZE bytes only */
-#define EP_TokenOnly 0x004000 /* Expr struct EXPR_TOKENONLYSIZE bytes only */
-#define EP_Static    0x008000 /* Held in memory not obtained from malloc() */
-#define EP_MemToken  0x010000 /* Need to sqlite3DbFree() Expr.zToken */
-#define EP_NoReduce  0x020000 /* Cannot EXPRDUP_REDUCE this Expr */
-#define EP_Unlikely  0x040000 /* unlikely() or likelihood() function */
-#define EP_ConstFunc 0x080000 /* A SQLITE_FUNC_CONSTANT or _SLOCHNG function */
-#define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */
-#define EP_Subquery  0x200000 /* Tree contains a TK_SELECT operator */
-#define EP_Alias     0x400000 /* Is an alias for a result set column */
-
-/*
-** Combinations of two or more EP_* flags
-*/
-#define EP_Propagate (EP_Collate|EP_Subquery) /* Propagate these bits up tree */
-
-/*
-** These macros can be used to test, set, or clear bits in the 
-** Expr.flags field.
-*/
-#define ExprHasProperty(E,P)     (((E)->flags&(P))!=0)
-#define ExprHasAllProperty(E,P)  (((E)->flags&(P))==(P))
-#define ExprSetProperty(E,P)     (E)->flags|=(P)
-#define ExprClearProperty(E,P)   (E)->flags&=~(P)
-
-/* The ExprSetVVAProperty() macro is used for Verification, Validation,
-** and Accreditation only.  It works like ExprSetProperty() during VVA
-** processes but is a no-op for delivery.
-*/
-#ifdef SQLITE_DEBUG
-# define ExprSetVVAProperty(E,P)  (E)->flags|=(P)
-#else
-# define ExprSetVVAProperty(E,P)
-#endif
-
-/*
-** Macros to determine the number of bytes required by a normal Expr 
-** struct, an Expr struct with the EP_Reduced flag set in Expr.flags 
-** and an Expr struct with the EP_TokenOnly flag set.
-*/
-#define EXPR_FULLSIZE           sizeof(Expr)           /* Full size */
-#define EXPR_REDUCEDSIZE        offsetof(Expr,iTable)  /* Common features */
-#define EXPR_TOKENONLYSIZE      offsetof(Expr,pLeft)   /* Fewer features */
-
-/*
-** Flags passed to the sqlite3ExprDup() function. See the header comment 
-** above sqlite3ExprDup() for details.
-*/
-#define EXPRDUP_REDUCE         0x0001  /* Used reduced-size Expr nodes */
-
-/*
-** A list of expressions.  Each expression may optionally have a
-** name.  An expr/name combination can be used in several ways, such
-** as the list of "expr AS ID" fields following a "SELECT" or in the
-** list of "ID = expr" items in an UPDATE.  A list of expressions can
-** also be used as the argument to a function, in which case the a.zName
-** field is not used.
-**
-** By default the Expr.zSpan field holds a human-readable description of
-** the expression that is used in the generation of error messages and
-** column labels.  In this case, Expr.zSpan is typically the text of a
-** column expression as it exists in a SELECT statement.  However, if
-** the bSpanIsTab flag is set, then zSpan is overloaded to mean the name
-** of the result column in the form: DATABASE.TABLE.COLUMN.  This later
-** form is used for name resolution with nested FROM clauses.
-*/
-struct ExprList {
-  int nExpr;             /* Number of expressions on the list */
-  struct ExprList_item { /* For each expression in the list */
-    Expr *pExpr;            /* The list of expressions */
-    char *zName;            /* Token associated with this expression */
-    char *zSpan;            /* Original text of the expression */
-    u8 sortOrder;           /* 1 for DESC or 0 for ASC */
-    unsigned done :1;       /* A flag to indicate when processing is finished */
-    unsigned bSpanIsTab :1; /* zSpan holds DB.TABLE.COLUMN */
-    unsigned reusable :1;   /* Constant expression is reusable */
-    union {
-      struct {
-        u16 iOrderByCol;      /* For ORDER BY, column number in result set */
-        u16 iAlias;           /* Index into Parse.aAlias[] for zName */
-      } x;
-      int iConstExprReg;      /* Register in which Expr value is cached */
-    } u;
-  } *a;                  /* Alloc a power of two greater or equal to nExpr */
-};
-
-/*
-** An instance of this structure is used by the parser to record both
-** the parse tree for an expression and the span of input text for an
-** expression.
-*/
-struct ExprSpan {
-  Expr *pExpr;          /* The expression parse tree */
-  const char *zStart;   /* First character of input text */
-  const char *zEnd;     /* One character past the end of input text */
-};
-
-/*
-** An instance of this structure can hold a simple list of identifiers,
-** such as the list "a,b,c" in the following statements:
-**
-**      INSERT INTO t(a,b,c) VALUES ...;
-**      CREATE INDEX idx ON t(a,b,c);
-**      CREATE TRIGGER trig BEFORE UPDATE ON t(a,b,c) ...;
-**
-** The IdList.a.idx field is used when the IdList represents the list of
-** column names after a table name in an INSERT statement.  In the statement
-**
-**     INSERT INTO t(a,b,c) ...
-**
-** If "a" is the k-th column of table "t", then IdList.a[0].idx==k.
-*/
-struct IdList {
-  struct IdList_item {
-    char *zName;      /* Name of the identifier */
-    int idx;          /* Index in some Table.aCol[] of a column named zName */
-  } *a;
-  int nId;         /* Number of identifiers on the list */
-};
-
-/*
-** The bitmask datatype defined below is used for various optimizations.
-**
-** Changing this from a 64-bit to a 32-bit type limits the number of
-** tables in a join to 32 instead of 64.  But it also reduces the size
-** of the library by 738 bytes on ix86.
-*/
-typedef u64 Bitmask;
-
-/*
-** The number of bits in a Bitmask.  "BMS" means "BitMask Size".
-*/
-#define BMS  ((int)(sizeof(Bitmask)*8))
-
-/*
-** A bit in a Bitmask
-*/
-#define MASKBIT(n)   (((Bitmask)1)<<(n))
-#define MASKBIT32(n) (((unsigned int)1)<<(n))
-
-/*
-** The following structure describes the FROM clause of a SELECT statement.
-** Each table or subquery in the FROM clause is a separate element of
-** the SrcList.a[] array.
-**
-** With the addition of multiple database support, the following structure
-** can also be used to describe a particular table such as the table that
-** is modified by an INSERT, DELETE, or UPDATE statement.  In standard SQL,
-** such a table must be a simple name: ID.  But in SQLite, the table can
-** now be identified by a database name, a dot, then the table name: ID.ID.
-**
-** The jointype starts out showing the join type between the current table
-** and the next table on the list.  The parser builds the list this way.
-** But sqlite3SrcListShiftJoinType() later shifts the jointypes so that each
-** jointype expresses the join between the table and the previous table.
-**
-** In the colUsed field, the high-order bit (bit 63) is set if the table
-** contains more than 63 columns and the 64-th or later column is used.
-*/
-struct SrcList {
-  int nSrc;        /* Number of tables or subqueries in the FROM clause */
-  u32 nAlloc;      /* Number of entries allocated in a[] below */
-  struct SrcList_item {
-    Schema *pSchema;  /* Schema to which this item is fixed */
-    char *zDatabase;  /* Name of database holding this table */
-    char *zName;      /* Name of the table */
-    char *zAlias;     /* The "B" part of a "A AS B" phrase.  zName is the "A" */
-    Table *pTab;      /* An SQL table corresponding to zName */
-    Select *pSelect;  /* A SELECT statement used in place of a table name */
-    int addrFillSub;  /* Address of subroutine to manifest a subquery */
-    int regReturn;    /* Register holding return address of addrFillSub */
-    int regResult;    /* Registers holding results of a co-routine */
-    struct {
-      u8 jointype;      /* Type of join between this able and the previous */
-      unsigned notIndexed :1;    /* True if there is a NOT INDEXED clause */
-      unsigned isIndexedBy :1;   /* True if there is an INDEXED BY clause */
-      unsigned isTabFunc :1;     /* True if table-valued-function syntax */
-      unsigned isCorrelated :1;  /* True if sub-query is correlated */
-      unsigned viaCoroutine :1;  /* Implemented as a co-routine */
-      unsigned isRecursive :1;   /* True for recursive reference in WITH */
-    } fg;
-#ifndef SQLITE_OMIT_EXPLAIN
-    u8 iSelectId;     /* If pSelect!=0, the id of the sub-select in EQP */
-#endif
-    int iCursor;      /* The VDBE cursor number used to access this table */
-    Expr *pOn;        /* The ON clause of a join */
-    IdList *pUsing;   /* The USING clause of a join */
-    Bitmask colUsed;  /* Bit N (1<<N) set if column N of pTab is used */
-    union {
-      char *zIndexedBy;    /* Identifier from "INDEXED BY <zIndex>" clause */
-      ExprList *pFuncArg;  /* Arguments to table-valued-function */
-    } u1;
-    Index *pIBIndex;  /* Index structure corresponding to u1.zIndexedBy */
-  } a[1];             /* One entry for each identifier on the list */
-};
-
-/*
-** Permitted values of the SrcList.a.jointype field
-*/
-#define JT_INNER     0x0001    /* Any kind of inner or cross join */
-#define JT_CROSS     0x0002    /* Explicit use of the CROSS keyword */
-#define JT_NATURAL   0x0004    /* True for a "natural" join */
-#define JT_LEFT      0x0008    /* Left outer join */
-#define JT_RIGHT     0x0010    /* Right outer join */
-#define JT_OUTER     0x0020    /* The "OUTER" keyword is present */
-#define JT_ERROR     0x0040    /* unknown or unsupported join type */
-
-
-/*
-** Flags appropriate for the wctrlFlags parameter of sqlite3WhereBegin()
-** and the WhereInfo.wctrlFlags member.
-*/
-#define WHERE_ORDERBY_NORMAL   0x0000 /* No-op */
-#define WHERE_ORDERBY_MIN      0x0001 /* ORDER BY processing for min() func */
-#define WHERE_ORDERBY_MAX      0x0002 /* ORDER BY processing for max() func */
-#define WHERE_ONEPASS_DESIRED  0x0004 /* Want to do one-pass UPDATE/DELETE */
-#define WHERE_DUPLICATES_OK    0x0008 /* Ok to return a row more than once */
-#define WHERE_OMIT_OPEN_CLOSE  0x0010 /* Table cursors are already open */
-#define WHERE_FORCE_TABLE      0x0020 /* Do not use an index-only search */
-#define WHERE_ONETABLE_ONLY    0x0040 /* Only code the 1st table in pTabList */
-#define WHERE_NO_AUTOINDEX     0x0080 /* Disallow automatic indexes */
-#define WHERE_GROUPBY          0x0100 /* pOrderBy is really a GROUP BY */
-#define WHERE_DISTINCTBY       0x0200 /* pOrderby is really a DISTINCT clause */
-#define WHERE_WANT_DISTINCT    0x0400 /* All output needs to be distinct */
-#define WHERE_SORTBYGROUP      0x0800 /* Support sqlite3WhereIsSorted() */
-#define WHERE_REOPEN_IDX       0x1000 /* Try to use OP_ReopenIdx */
-#define WHERE_ONEPASS_MULTIROW 0x2000 /* ONEPASS is ok with multiple rows */
-
-/* Allowed return values from sqlite3WhereIsDistinct()
-*/
-#define WHERE_DISTINCT_NOOP      0  /* DISTINCT keyword not used */
-#define WHERE_DISTINCT_UNIQUE    1  /* No duplicates */
-#define WHERE_DISTINCT_ORDERED   2  /* All duplicates are adjacent */
-#define WHERE_DISTINCT_UNORDERED 3  /* Duplicates are scattered */
-
-/*
-** A NameContext defines a context in which to resolve table and column
-** names.  The context consists of a list of tables (the pSrcList) field and
-** a list of named expression (pEList).  The named expression list may
-** be NULL.  The pSrc corresponds to the FROM clause of a SELECT or
-** to the table being operated on by INSERT, UPDATE, or DELETE.  The
-** pEList corresponds to the result set of a SELECT and is NULL for
-** other statements.
-**
-** NameContexts can be nested.  When resolving names, the inner-most 
-** context is searched first.  If no match is found, the next outer
-** context is checked.  If there is still no match, the next context
-** is checked.  This process continues until either a match is found
-** or all contexts are check.  When a match is found, the nRef member of
-** the context containing the match is incremented. 
-**
-** Each subquery gets a new NameContext.  The pNext field points to the
-** NameContext in the parent query.  Thus the process of scanning the
-** NameContext list corresponds to searching through successively outer
-** subqueries looking for a match.
-*/
-struct NameContext {
-  Parse *pParse;       /* The parser */
-  SrcList *pSrcList;   /* One or more tables used to resolve names */
-  ExprList *pEList;    /* Optional list of result-set columns */
-  AggInfo *pAggInfo;   /* Information about aggregates at this level */
-  NameContext *pNext;  /* Next outer name context.  NULL for outermost */
-  int nRef;            /* Number of names resolved by this context */
-  int nErr;            /* Number of errors encountered while resolving names */
-  u16 ncFlags;         /* Zero or more NC_* flags defined below */
-};
-
-/*
-** Allowed values for the NameContext, ncFlags field.
-**
-** Note:  NC_MinMaxAgg must have the same value as SF_MinMaxAgg and
-** SQLITE_FUNC_MINMAX.
-** 
-*/
-#define NC_AllowAgg  0x0001  /* Aggregate functions are allowed here */
-#define NC_HasAgg    0x0002  /* One or more aggregate functions seen */
-#define NC_IsCheck   0x0004  /* True if resolving names in a CHECK constraint */
-#define NC_InAggFunc 0x0008  /* True if analyzing arguments to an agg func */
-#define NC_PartIdx   0x0010  /* True if resolving a partial index WHERE */
-#define NC_IdxExpr   0x0020  /* True if resolving columns of CREATE INDEX */
-#define NC_MinMaxAgg 0x1000  /* min/max aggregates seen.  See note above */
-
-/*
-** An instance of the following structure contains all information
-** needed to generate code for a single SELECT statement.
-**
-** nLimit is set to -1 if there is no LIMIT clause.  nOffset is set to 0.
-** If there is a LIMIT clause, the parser sets nLimit to the value of the
-** limit and nOffset to the value of the offset (or 0 if there is not
-** offset).  But later on, nLimit and nOffset become the memory locations
-** in the VDBE that record the limit and offset counters.
-**
-** addrOpenEphm[] entries contain the address of OP_OpenEphemeral opcodes.
-** These addresses must be stored so that we can go back and fill in
-** the P4_KEYINFO and P2 parameters later.  Neither the KeyInfo nor
-** the number of columns in P2 can be computed at the same time
-** as the OP_OpenEphm instruction is coded because not
-** enough information about the compound query is known at that point.
-** The KeyInfo for addrOpenTran[0] and [1] contains collating sequences
-** for the result set.  The KeyInfo for addrOpenEphm[2] contains collating
-** sequences for the ORDER BY clause.
-*/
-struct Select {
-  ExprList *pEList;      /* The fields of the result */
-  u8 op;                 /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */
-  u16 selFlags;          /* Various SF_* values */
-  int iLimit, iOffset;   /* Memory registers holding LIMIT & OFFSET counters */
-#if SELECTTRACE_ENABLED
-  char zSelName[12];     /* Symbolic name of this SELECT use for debugging */
-#endif
-  int addrOpenEphm[2];   /* OP_OpenEphem opcodes related to this select */
-  u64 nSelectRow;        /* Estimated number of result rows */
-  SrcList *pSrc;         /* The FROM clause */
-  Expr *pWhere;          /* The WHERE clause */
-  ExprList *pGroupBy;    /* The GROUP BY clause */
-  Expr *pHaving;         /* The HAVING clause */
-  ExprList *pOrderBy;    /* The ORDER BY clause */
-  Select *pPrior;        /* Prior select in a compound select statement */
-  Select *pNext;         /* Next select to the left in a compound */
-  Expr *pLimit;          /* LIMIT expression. NULL means not used. */
-  Expr *pOffset;         /* OFFSET expression. NULL means not used. */
-  With *pWith;           /* WITH clause attached to this select. Or NULL. */
-};
-
-/*
-** Allowed values for Select.selFlags.  The "SF" prefix stands for
-** "Select Flag".
-*/
-#define SF_Distinct        0x0001  /* Output should be DISTINCT */
-#define SF_All             0x0002  /* Includes the ALL keyword */
-#define SF_Resolved        0x0004  /* Identifiers have been resolved */
-#define SF_Aggregate       0x0008  /* Contains aggregate functions */
-#define SF_UsesEphemeral   0x0010  /* Uses the OpenEphemeral opcode */
-#define SF_Expanded        0x0020  /* sqlite3SelectExpand() called on this */
-#define SF_HasTypeInfo     0x0040  /* FROM subqueries have Table metadata */
-#define SF_Compound        0x0080  /* Part of a compound query */
-#define SF_Values          0x0100  /* Synthesized from VALUES clause */
-#define SF_MultiValue      0x0200  /* Single VALUES term with multiple rows */
-#define SF_NestedFrom      0x0400  /* Part of a parenthesized FROM clause */
-#define SF_MaybeConvert    0x0800  /* Need convertCompoundSelectToSubquery() */
-#define SF_MinMaxAgg       0x1000  /* Aggregate containing min() or max() */
-#define SF_Recursive       0x2000  /* The recursive part of a recursive CTE */
-#define SF_Converted       0x4000  /* By convertCompoundSelectToSubquery() */
-#define SF_IncludeHidden   0x8000  /* Include hidden columns in output */
-
-
-/*
-** The results of a SELECT can be distributed in several ways, as defined
-** by one of the following macros.  The "SRT" prefix means "SELECT Result
-** Type".
-**
-**     SRT_Union       Store results as a key in a temporary index 
-**                     identified by pDest->iSDParm.
-**
-**     SRT_Except      Remove results from the temporary index pDest->iSDParm.
-**
-**     SRT_Exists      Store a 1 in memory cell pDest->iSDParm if the result
-**                     set is not empty.
-**
-**     SRT_Discard     Throw the results away.  This is used by SELECT
-**                     statements within triggers whose only purpose is
-**                     the side-effects of functions.
-**
-** All of the above are free to ignore their ORDER BY clause. Those that
-** follow must honor the ORDER BY clause.
-**
-**     SRT_Output      Generate a row of output (using the OP_ResultRow
-**                     opcode) for each row in the result set.
-**
-**     SRT_Mem         Only valid if the result is a single column.
-**                     Store the first column of the first result row
-**                     in register pDest->iSDParm then abandon the rest
-**                     of the query.  This destination implies "LIMIT 1".
-**
-**     SRT_Set         The result must be a single column.  Store each
-**                     row of result as the key in table pDest->iSDParm. 
-**                     Apply the affinity pDest->affSdst before storing
-**                     results.  Used to implement "IN (SELECT ...)".
-**
-**     SRT_EphemTab    Create an temporary table pDest->iSDParm and store
-**                     the result there. The cursor is left open after
-**                     returning.  This is like SRT_Table except that
-**                     this destination uses OP_OpenEphemeral to create
-**                     the table first.
-**
-**     SRT_Coroutine   Generate a co-routine that returns a new row of
-**                     results each time it is invoked.  The entry point
-**                     of the co-routine is stored in register pDest->iSDParm
-**                     and the result row is stored in pDest->nDest registers
-**                     starting with pDest->iSdst.
-**
-**     SRT_Table       Store results in temporary table pDest->iSDParm.
-**     SRT_Fifo        This is like SRT_EphemTab except that the table
-**                     is assumed to already be open.  SRT_Fifo has
-**                     the additional property of being able to ignore
-**                     the ORDER BY clause.
-**
-**     SRT_DistFifo    Store results in a temporary table pDest->iSDParm.
-**                     But also use temporary table pDest->iSDParm+1 as
-**                     a record of all prior results and ignore any duplicate
-**                     rows.  Name means:  "Distinct Fifo".
-**
-**     SRT_Queue       Store results in priority queue pDest->iSDParm (really
-**                     an index).  Append a sequence number so that all entries
-**                     are distinct.
-**
-**     SRT_DistQueue   Store results in priority queue pDest->iSDParm only if
-**                     the same record has never been stored before.  The
-**                     index at pDest->iSDParm+1 hold all prior stores.
-*/
-#define SRT_Union        1  /* Store result as keys in an index */
-#define SRT_Except       2  /* Remove result from a UNION index */
-#define SRT_Exists       3  /* Store 1 if the result is not empty */
-#define SRT_Discard      4  /* Do not save the results anywhere */
-#define SRT_Fifo         5  /* Store result as data with an automatic rowid */
-#define SRT_DistFifo     6  /* Like SRT_Fifo, but unique results only */
-#define SRT_Queue        7  /* Store result in an queue */
-#define SRT_DistQueue    8  /* Like SRT_Queue, but unique results only */
-
-/* The ORDER BY clause is ignored for all of the above */
-#define IgnorableOrderby(X) ((X->eDest)<=SRT_DistQueue)
-
-#define SRT_Output       9  /* Output each row of result */
-#define SRT_Mem         10  /* Store result in a memory cell */
-#define SRT_Set         11  /* Store results as keys in an index */
-#define SRT_EphemTab    12  /* Create transient tab and store like SRT_Table */
-#define SRT_Coroutine   13  /* Generate a single row of result */
-#define SRT_Table       14  /* Store result as data with an automatic rowid */
-
-/*
-** An instance of this object describes where to put of the results of
-** a SELECT statement.
-*/
-struct SelectDest {
-  u8 eDest;            /* How to dispose of the results.  On of SRT_* above. */
-  char affSdst;        /* Affinity used when eDest==SRT_Set */
-  int iSDParm;         /* A parameter used by the eDest disposal method */
-  int iSdst;           /* Base register where results are written */
-  int nSdst;           /* Number of registers allocated */
-  ExprList *pOrderBy;  /* Key columns for SRT_Queue and SRT_DistQueue */
-};
-
-/*
-** During code generation of statements that do inserts into AUTOINCREMENT 
-** tables, the following information is attached to the Table.u.autoInc.p
-** pointer of each autoincrement table to record some side information that
-** the code generator needs.  We have to keep per-table autoincrement
-** information in case inserts are down within triggers.  Triggers do not
-** normally coordinate their activities, but we do need to coordinate the
-** loading and saving of autoincrement information.
-*/
-struct AutoincInfo {
-  AutoincInfo *pNext;   /* Next info block in a list of them all */
-  Table *pTab;          /* Table this info block refers to */
-  int iDb;              /* Index in sqlite3.aDb[] of database holding pTab */
-  int regCtr;           /* Memory register holding the rowid counter */
-};
-
-/*
-** Size of the column cache
-*/
-#ifndef SQLITE_N_COLCACHE
-# define SQLITE_N_COLCACHE 10
-#endif
-
-/*
-** At least one instance of the following structure is created for each 
-** trigger that may be fired while parsing an INSERT, UPDATE or DELETE
-** statement. All such objects are stored in the linked list headed at
-** Parse.pTriggerPrg and deleted once statement compilation has been
-** completed.
-**
-** A Vdbe sub-program that implements the body and WHEN clause of trigger
-** TriggerPrg.pTrigger, assuming a default ON CONFLICT clause of
-** TriggerPrg.orconf, is stored in the TriggerPrg.pProgram variable.
-** The Parse.pTriggerPrg list never contains two entries with the same
-** values for both pTrigger and orconf.
-**
-** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns
-** accessed (or set to 0 for triggers fired as a result of INSERT 
-** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to
-** a mask of new.* columns used by the program.
-*/
-struct TriggerPrg {
-  Trigger *pTrigger;      /* Trigger this program was coded from */
-  TriggerPrg *pNext;      /* Next entry in Parse.pTriggerPrg list */
-  SubProgram *pProgram;   /* Program implementing pTrigger/orconf */
-  int orconf;             /* Default ON CONFLICT policy */
-  u32 aColmask[2];        /* Masks of old.*, new.* columns accessed */
-};
-
-/*
-** The yDbMask datatype for the bitmask of all attached databases.
-*/
-#if SQLITE_MAX_ATTACHED>30
-  typedef unsigned char yDbMask[(SQLITE_MAX_ATTACHED+9)/8];
-# define DbMaskTest(M,I)    (((M)[(I)/8]&(1<<((I)&7)))!=0)
-# define DbMaskZero(M)      memset((M),0,sizeof(M))
-# define DbMaskSet(M,I)     (M)[(I)/8]|=(1<<((I)&7))
-# define DbMaskAllZero(M)   sqlite3DbMaskAllZero(M)
-# define DbMaskNonZero(M)   (sqlite3DbMaskAllZero(M)==0)
-#else
-  typedef unsigned int yDbMask;
-# define DbMaskTest(M,I)    (((M)&(((yDbMask)1)<<(I)))!=0)
-# define DbMaskZero(M)      (M)=0
-# define DbMaskSet(M,I)     (M)|=(((yDbMask)1)<<(I))
-# define DbMaskAllZero(M)   (M)==0
-# define DbMaskNonZero(M)   (M)!=0
-#endif
-
-/*
-** An SQL parser context.  A copy of this structure is passed through
-** the parser and down into all the parser action routine in order to
-** carry around information that is global to the entire parse.
-**
-** The structure is divided into two parts.  When the parser and code
-** generate call themselves recursively, the first part of the structure
-** is constant but the second part is reset at the beginning and end of
-** each recursion.
-**
-** The nTableLock and aTableLock variables are only used if the shared-cache 
-** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are
-** used to store the set of table-locks required by the statement being
-** compiled. Function sqlite3TableLock() is used to add entries to the
-** list.
-*/
-struct Parse {
-  sqlite3 *db;         /* The main database structure */
-  char *zErrMsg;       /* An error message */
-  Vdbe *pVdbe;         /* An engine for executing database bytecode */
-  int rc;              /* Return code from execution */
-  u8 colNamesSet;      /* TRUE after OP_ColumnName has been issued to pVdbe */
-  u8 checkSchema;      /* Causes schema cookie check after an error */
-  u8 nested;           /* Number of nested calls to the parser/code generator */
-  u8 nTempReg;         /* Number of temporary registers in aTempReg[] */
-  u8 isMultiWrite;     /* True if statement may modify/insert multiple rows */
-  u8 mayAbort;         /* True if statement may throw an ABORT exception */
-  u8 hasCompound;      /* Need to invoke convertCompoundSelectToSubquery() */
-  u8 okConstFactor;    /* OK to factor out constants */
-  int aTempReg[8];     /* Holding area for temporary registers */
-  int nRangeReg;       /* Size of the temporary register block */
-  int iRangeReg;       /* First register in temporary register block */
-  int nErr;            /* Number of errors seen */
-  int nTab;            /* Number of previously allocated VDBE cursors */
-  int nMem;            /* Number of memory cells used so far */
-  int nSet;            /* Number of sets used so far */
-  int nOnce;           /* Number of OP_Once instructions so far */
-  int nOpAlloc;        /* Number of slots allocated for Vdbe.aOp[] */
-  int szOpAlloc;       /* Bytes of memory space allocated for Vdbe.aOp[] */
-  int iFixedOp;        /* Never back out opcodes iFixedOp-1 or earlier */
-  int ckBase;          /* Base register of data during check constraints */
-  int iSelfTab;        /* Table of an index whose exprs are being coded */
-  int iCacheLevel;     /* ColCache valid when aColCache[].iLevel<=iCacheLevel */
-  int iCacheCnt;       /* Counter used to generate aColCache[].lru values */
-  int nLabel;          /* Number of labels used */
-  int *aLabel;         /* Space to hold the labels */
-  struct yColCache {
-    int iTable;           /* Table cursor number */
-    i16 iColumn;          /* Table column number */
-    u8 tempReg;           /* iReg is a temp register that needs to be freed */
-    int iLevel;           /* Nesting level */
-    int iReg;             /* Reg with value of this column. 0 means none. */
-    int lru;              /* Least recently used entry has the smallest value */
-  } aColCache[SQLITE_N_COLCACHE];  /* One for each column cache entry */
-  ExprList *pConstExpr;/* Constant expressions */
-  Token constraintName;/* Name of the constraint currently being parsed */
-  yDbMask writeMask;   /* Start a write transaction on these databases */
-  yDbMask cookieMask;  /* Bitmask of schema verified databases */
-  int cookieValue[SQLITE_MAX_ATTACHED+2];  /* Values of cookies to verify */
-  int regRowid;        /* Register holding rowid of CREATE TABLE entry */
-  int regRoot;         /* Register holding root page number for new objects */
-  int nMaxArg;         /* Max args passed to user function by sub-program */
-#if SELECTTRACE_ENABLED
-  int nSelect;         /* Number of SELECT statements seen */
-  int nSelectIndent;   /* How far to indent SELECTTRACE() output */
-#endif
-#ifndef SQLITE_OMIT_SHARED_CACHE
-  int nTableLock;        /* Number of locks in aTableLock */
-  TableLock *aTableLock; /* Required table locks for shared-cache mode */
-#endif
-  AutoincInfo *pAinc;  /* Information about AUTOINCREMENT counters */
-
-  /* Information used while coding trigger programs. */
-  Parse *pToplevel;    /* Parse structure for main program (or NULL) */
-  Table *pTriggerTab;  /* Table triggers are being coded for */
-  int addrCrTab;       /* Address of OP_CreateTable opcode on CREATE TABLE */
-  u32 nQueryLoop;      /* Est number of iterations of a query (10*log2(N)) */
-  u32 oldmask;         /* Mask of old.* columns referenced */
-  u32 newmask;         /* Mask of new.* columns referenced */
-  u8 eTriggerOp;       /* TK_UPDATE, TK_INSERT or TK_DELETE */
-  u8 eOrconf;          /* Default ON CONFLICT policy for trigger steps */
-  u8 disableTriggers;  /* True to disable triggers */
-
-  /************************************************************************
-  ** Above is constant between recursions.  Below is reset before and after
-  ** each recursion.  The boundary between these two regions is determined
-  ** using offsetof(Parse,nVar) so the nVar field must be the first field
-  ** in the recursive region.
-  ************************************************************************/
-
-  int nVar;                 /* Number of '?' variables seen in the SQL so far */
-  int nzVar;                /* Number of available slots in azVar[] */
-  u8 iPkSortOrder;          /* ASC or DESC for INTEGER PRIMARY KEY */
-  u8 explain;               /* True if the EXPLAIN flag is found on the query */
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-  u8 declareVtab;           /* True if inside sqlite3_declare_vtab() */
-  int nVtabLock;            /* Number of virtual tables to lock */
-#endif
-  int nAlias;               /* Number of aliased result set columns */
-  int nHeight;              /* Expression tree height of current sub-select */
-#ifndef SQLITE_OMIT_EXPLAIN
-  int iSelectId;            /* ID of current select for EXPLAIN output */
-  int iNextSelectId;        /* Next available select ID for EXPLAIN output */
-#endif
-  char **azVar;             /* Pointers to names of parameters */
-  Vdbe *pReprepare;         /* VM being reprepared (sqlite3Reprepare()) */
-  const char *zTail;        /* All SQL text past the last semicolon parsed */
-  Table *pNewTable;         /* A table being constructed by CREATE TABLE */
-  Trigger *pNewTrigger;     /* Trigger under construct by a CREATE TRIGGER */
-  const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */
-  Token sNameToken;         /* Token with unqualified schema object name */
-  Token sLastToken;         /* The last token parsed */
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-  Token sArg;               /* Complete text of a module argument */
-  Table **apVtabLock;       /* Pointer to virtual tables needing locking */
-#endif
-  Table *pZombieTab;        /* List of Table objects to delete after code gen */
-  TriggerPrg *pTriggerPrg;  /* Linked list of coded triggers */
-  With *pWith;              /* Current WITH clause, or NULL */
-  With *pWithToFree;        /* Free this WITH object at the end of the parse */
-};
-
-/*
-** Return true if currently inside an sqlite3_declare_vtab() call.
-*/
-#ifdef SQLITE_OMIT_VIRTUALTABLE
-  #define IN_DECLARE_VTAB 0
-#else
-  #define IN_DECLARE_VTAB (pParse->declareVtab)
-#endif
-
-/*
-** An instance of the following structure can be declared on a stack and used
-** to save the Parse.zAuthContext value so that it can be restored later.
-*/
-struct AuthContext {
-  const char *zAuthContext;   /* Put saved Parse.zAuthContext here */
-  Parse *pParse;              /* The Parse structure */
-};
-
-/*
-** Bitfield flags for P5 value in various opcodes.
-*/
-#define OPFLAG_NCHANGE       0x01    /* Set to update db->nChange */
-#define OPFLAG_EPHEM         0x01    /* OP_Column: Ephemeral output is ok */
-#define OPFLAG_LASTROWID     0x02    /* Set to update db->lastRowid */
-#define OPFLAG_ISUPDATE      0x04    /* This OP_Insert is an sql UPDATE */
-#define OPFLAG_APPEND        0x08    /* This is likely to be an append */
-#define OPFLAG_USESEEKRESULT 0x10    /* Try to avoid a seek in BtreeInsert() */
-#define OPFLAG_LENGTHARG     0x40    /* OP_Column only used for length() */
-#define OPFLAG_TYPEOFARG     0x80    /* OP_Column only used for typeof() */
-#define OPFLAG_BULKCSR       0x01    /* OP_Open** used to open bulk cursor */
-#define OPFLAG_SEEKEQ        0x02    /* OP_Open** cursor uses EQ seek only */
-#define OPFLAG_FORDELETE     0x08    /* OP_Open is opening for-delete csr */
-#define OPFLAG_P2ISREG       0x10    /* P2 to OP_Open** is a register number */
-#define OPFLAG_PERMUTE       0x01    /* OP_Compare: use the permutation */
-
-/*
- * Each trigger present in the database schema is stored as an instance of
- * struct Trigger. 
- *
- * Pointers to instances of struct Trigger are stored in two ways.
- * 1. In the "trigHash" hash table (part of the sqlite3* that represents the 
- *    database). This allows Trigger structures to be retrieved by name.
- * 2. All triggers associated with a single table form a linked list, using the
- *    pNext member of struct Trigger. A pointer to the first element of the
- *    linked list is stored as the "pTrigger" member of the associated
- *    struct Table.
- *
- * The "step_list" member points to the first element of a linked list
- * containing the SQL statements specified as the trigger program.
- */
-struct Trigger {
-  char *zName;            /* The name of the trigger                        */
-  char *table;            /* The table or view to which the trigger applies */
-  u8 op;                  /* One of TK_DELETE, TK_UPDATE, TK_INSERT         */
-  u8 tr_tm;               /* One of TRIGGER_BEFORE, TRIGGER_AFTER */
-  Expr *pWhen;            /* The WHEN clause of the expression (may be NULL) */
-  IdList *pColumns;       /* If this is an UPDATE OF <column-list> trigger,
-                             the <column-list> is stored here */
-  Schema *pSchema;        /* Schema containing the trigger */
-  Schema *pTabSchema;     /* Schema containing the table */
-  TriggerStep *step_list; /* Link list of trigger program steps             */
-  Trigger *pNext;         /* Next trigger associated with the table */
-};
-
-/*
-** A trigger is either a BEFORE or an AFTER trigger.  The following constants
-** determine which. 
-**
-** If there are multiple triggers, you might of some BEFORE and some AFTER.
-** In that cases, the constants below can be ORed together.
-*/
-#define TRIGGER_BEFORE  1
-#define TRIGGER_AFTER   2
-
-/*
- * An instance of struct TriggerStep is used to store a single SQL statement
- * that is a part of a trigger-program. 
- *
- * Instances of struct TriggerStep are stored in a singly linked list (linked
- * using the "pNext" member) referenced by the "step_list" member of the 
- * associated struct Trigger instance. The first element of the linked list is
- * the first step of the trigger-program.
- * 
- * The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or
- * "SELECT" statement. The meanings of the other members is determined by the 
- * value of "op" as follows:
- *
- * (op == TK_INSERT)
- * orconf    -> stores the ON CONFLICT algorithm
- * pSelect   -> If this is an INSERT INTO ... SELECT ... statement, then
- *              this stores a pointer to the SELECT statement. Otherwise NULL.
- * zTarget   -> Dequoted name of the table to insert into.
- * pExprList -> If this is an INSERT INTO ... VALUES ... statement, then
- *              this stores values to be inserted. Otherwise NULL.
- * pIdList   -> If this is an INSERT INTO ... (<column-names>) VALUES ... 
- *              statement, then this stores the column-names to be
- *              inserted into.
- *
- * (op == TK_DELETE)
- * zTarget   -> Dequoted name of the table to delete from.
- * pWhere    -> The WHERE clause of the DELETE statement if one is specified.
- *              Otherwise NULL.
- * 
- * (op == TK_UPDATE)
- * zTarget   -> Dequoted name of the table to update.
- * pWhere    -> The WHERE clause of the UPDATE statement if one is specified.
- *              Otherwise NULL.
- * pExprList -> A list of the columns to update and the expressions to update
- *              them to. See sqlite3Update() documentation of "pChanges"
- *              argument.
- * 
- */
-struct TriggerStep {
-  u8 op;               /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */
-  u8 orconf;           /* OE_Rollback etc. */
-  Trigger *pTrig;      /* The trigger that this step is a part of */
-  Select *pSelect;     /* SELECT statement or RHS of INSERT INTO SELECT ... */
-  char *zTarget;       /* Target table for DELETE, UPDATE, INSERT */
-  Expr *pWhere;        /* The WHERE clause for DELETE or UPDATE steps */
-  ExprList *pExprList; /* SET clause for UPDATE. */
-  IdList *pIdList;     /* Column names for INSERT */
-  TriggerStep *pNext;  /* Next in the link-list */
-  TriggerStep *pLast;  /* Last element in link-list. Valid for 1st elem only */
-};
-
-/*
-** The following structure contains information used by the sqliteFix...
-** routines as they walk the parse tree to make database references
-** explicit.  
-*/
-typedef struct DbFixer DbFixer;
-struct DbFixer {
-  Parse *pParse;      /* The parsing context.  Error messages written here */
-  Schema *pSchema;    /* Fix items to this schema */
-  int bVarOnly;       /* Check for variable references only */
-  const char *zDb;    /* Make sure all objects are contained in this database */
-  const char *zType;  /* Type of the container - used for error messages */
-  const Token *pName; /* Name of the container - used for error messages */
-};
-
-/*
-** An objected used to accumulate the text of a string where we
-** do not necessarily know how big the string will be in the end.
-*/
-struct StrAccum {
-  sqlite3 *db;         /* Optional database for lookaside.  Can be NULL */
-  char *zBase;         /* A base allocation.  Not from malloc. */
-  char *zText;         /* The string collected so far */
-  u32  nChar;          /* Length of the string so far */
-  u32  nAlloc;         /* Amount of space allocated in zText */
-  u32  mxAlloc;        /* Maximum allowed allocation.  0 for no malloc usage */
-  u8   accError;       /* STRACCUM_NOMEM or STRACCUM_TOOBIG */
-  u8   bMalloced;      /* zText points to allocated space */
-};
-#define STRACCUM_NOMEM   1
-#define STRACCUM_TOOBIG  2
-
-/*
-** A pointer to this structure is used to communicate information
-** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback.
-*/
-typedef struct {
-  sqlite3 *db;        /* The database being initialized */
-  char **pzErrMsg;    /* Error message stored here */
-  int iDb;            /* 0 for main database.  1 for TEMP, 2.. for ATTACHed */
-  int rc;             /* Result code stored here */
-} InitData;
-
-/*
-** Structure containing global configuration data for the SQLite library.
-**
-** This structure also contains some state information.
-*/
-struct Sqlite3Config {
-  int bMemstat;                     /* True to enable memory status */
-  int bCoreMutex;                   /* True to enable core mutexing */
-  int bFullMutex;                   /* True to enable full mutexing */
-  int bOpenUri;                     /* True to interpret filenames as URIs */
-  int bUseCis;                      /* Use covering indices for full-scans */
-  int mxStrlen;                     /* Maximum string length */
-  int neverCorrupt;                 /* Database is always well-formed */
-  int szLookaside;                  /* Default lookaside buffer size */
-  int nLookaside;                   /* Default lookaside buffer count */
-  sqlite3_mem_methods m;            /* Low-level memory allocation interface */
-  sqlite3_mutex_methods mutex;      /* Low-level mutex interface */
-  sqlite3_pcache_methods2 pcache2;  /* Low-level page-cache interface */
-  void *pHeap;                      /* Heap storage space */
-  int nHeap;                        /* Size of pHeap[] */
-  int mnReq, mxReq;                 /* Min and max heap requests sizes */
-  sqlite3_int64 szMmap;             /* mmap() space per open file */
-  sqlite3_int64 mxMmap;             /* Maximum value for szMmap */
-  void *pScratch;                   /* Scratch memory */
-  int szScratch;                    /* Size of each scratch buffer */
-  int nScratch;                     /* Number of scratch buffers */
-  void *pPage;                      /* Page cache memory */
-  int szPage;                       /* Size of each page in pPage[] */
-  int nPage;                        /* Number of pages in pPage[] */
-  int mxParserStack;                /* maximum depth of the parser stack */
-  int sharedCacheEnabled;           /* true if shared-cache mode enabled */
-  u32 szPma;                        /* Maximum Sorter PMA size */
-  /* The above might be initialized to non-zero.  The following need to always
-  ** initially be zero, however. */
-  int isInit;                       /* True after initialization has finished */
-  int inProgress;                   /* True while initialization in progress */
-  int isMutexInit;                  /* True after mutexes are initialized */
-  int isMallocInit;                 /* True after malloc is initialized */
-  int isPCacheInit;                 /* True after malloc is initialized */
-  int nRefInitMutex;                /* Number of users of pInitMutex */
-  sqlite3_mutex *pInitMutex;        /* Mutex used by sqlite3_initialize() */
-  void (*xLog)(void*,int,const char*); /* Function for logging */
-  void *pLogArg;                       /* First argument to xLog() */
-#ifdef SQLITE_ENABLE_SQLLOG
-  void(*xSqllog)(void*,sqlite3*,const char*, int);
-  void *pSqllogArg;
-#endif
-#ifdef SQLITE_VDBE_COVERAGE
-  /* The following callback (if not NULL) is invoked on every VDBE branch
-  ** operation.  Set the callback using SQLITE_TESTCTRL_VDBE_COVERAGE.
-  */
-  void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx);  /* Callback */
-  void *pVdbeBranchArg;                                     /* 1st argument */
-#endif
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-  int (*xTestCallback)(int);        /* Invoked by sqlite3FaultSim() */
-#endif
-  int bLocaltimeFault;              /* True to fail localtime() calls */
-};
-
-/*
-** This macro is used inside of assert() statements to indicate that
-** the assert is only valid on a well-formed database.  Instead of:
-**
-**     assert( X );
-**
-** One writes:
-**
-**     assert( X || CORRUPT_DB );
-**
-** CORRUPT_DB is true during normal operation.  CORRUPT_DB does not indicate
-** that the database is definitely corrupt, only that it might be corrupt.
-** For most test cases, CORRUPT_DB is set to false using a special
-** sqlite3_test_control().  This enables assert() statements to prove
-** things that are always true for well-formed databases.
-*/
-#define CORRUPT_DB  (sqlite3Config.neverCorrupt==0)
-
-/*
-** Context pointer passed down through the tree-walk.
-*/
-struct Walker {
-  int (*xExprCallback)(Walker*, Expr*);     /* Callback for expressions */
-  int (*xSelectCallback)(Walker*,Select*);  /* Callback for SELECTs */
-  void (*xSelectCallback2)(Walker*,Select*);/* Second callback for SELECTs */
-  Parse *pParse;                            /* Parser context.  */
-  int walkerDepth;                          /* Number of subqueries */
-  u8 eCode;                                 /* A small processing code */
-  union {                                   /* Extra data for callback */
-    NameContext *pNC;                          /* Naming context */
-    int n;                                     /* A counter */
-    int iCur;                                  /* A cursor number */
-    SrcList *pSrcList;                         /* FROM clause */
-    struct SrcCount *pSrcCount;                /* Counting column references */
-    struct CCurHint *pCCurHint;                /* Used by codeCursorHint() */
-  } u;
-};
-
-/* Forward declarations */
-int sqlite3WalkExpr(Walker*, Expr*);
-int sqlite3WalkExprList(Walker*, ExprList*);
-int sqlite3WalkSelect(Walker*, Select*);
-int sqlite3WalkSelectExpr(Walker*, Select*);
-int sqlite3WalkSelectFrom(Walker*, Select*);
-int sqlite3ExprWalkNoop(Walker*, Expr*);
-
-/*
-** Return code from the parse-tree walking primitives and their
-** callbacks.
-*/
-#define WRC_Continue    0   /* Continue down into children */
-#define WRC_Prune       1   /* Omit children but continue walking siblings */
-#define WRC_Abort       2   /* Abandon the tree walk */
-
-/*
-** An instance of this structure represents a set of one or more CTEs
-** (common table expressions) created by a single WITH clause.
-*/
-struct With {
-  int nCte;                       /* Number of CTEs in the WITH clause */
-  With *pOuter;                   /* Containing WITH clause, or NULL */
-  struct Cte {                    /* For each CTE in the WITH clause.... */
-    char *zName;                    /* Name of this CTE */
-    ExprList *pCols;                /* List of explicit column names, or NULL */
-    Select *pSelect;                /* The definition of this CTE */
-    const char *zCteErr;            /* Error message for circular references */
-  } a[1];
-};
-
-#ifdef SQLITE_DEBUG
-/*
-** An instance of the TreeView object is used for printing the content of
-** data structures on sqlite3DebugPrintf() using a tree-like view.
-*/
-struct TreeView {
-  int iLevel;             /* Which level of the tree we are on */
-  u8  bLine[100];         /* Draw vertical in column i if bLine[i] is true */
-};
-#endif /* SQLITE_DEBUG */
-
-/*
-** Assuming zIn points to the first byte of a UTF-8 character,
-** advance zIn to point to the first byte of the next UTF-8 character.
-*/
-#define SQLITE_SKIP_UTF8(zIn) {                        \
-  if( (*(zIn++))>=0xc0 ){                              \
-    while( (*zIn & 0xc0)==0x80 ){ zIn++; }             \
-  }                                                    \
-}
-
-/*
-** The SQLITE_*_BKPT macros are substitutes for the error codes with
-** the same name but without the _BKPT suffix.  These macros invoke
-** routines that report the line-number on which the error originated
-** using sqlite3_log().  The routines also provide a convenient place
-** to set a debugger breakpoint.
-*/
-int sqlite3CorruptError(int);
-int sqlite3MisuseError(int);
-int sqlite3CantopenError(int);
-#define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__)
-#define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__)
-#define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__)
-
-
-/*
-** FTS4 is really an extension for FTS3.  It is enabled using the
-** SQLITE_ENABLE_FTS3 macro.  But to avoid confusion we also call
-** the SQLITE_ENABLE_FTS4 macro to serve as an alias for SQLITE_ENABLE_FTS3.
-*/
-#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3)
-# define SQLITE_ENABLE_FTS3 1
-#endif
-
-/*
-** The ctype.h header is needed for non-ASCII systems.  It is also
-** needed by FTS3 when FTS3 is included in the amalgamation.
-*/
-#if !defined(SQLITE_ASCII) || \
-    (defined(SQLITE_ENABLE_FTS3) && defined(SQLITE_AMALGAMATION))
-# include <ctype.h>
-#endif
-
-/*
-** The following macros mimic the standard library functions toupper(),
-** isspace(), isalnum(), isdigit() and isxdigit(), respectively. The
-** sqlite versions only work for ASCII characters, regardless of locale.
-*/
-#ifdef SQLITE_ASCII
-# define sqlite3Toupper(x)  ((x)&~(sqlite3CtypeMap[(unsigned char)(x)]&0x20))
-# define sqlite3Isspace(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x01)
-# define sqlite3Isalnum(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x06)
-# define sqlite3Isalpha(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x02)
-# define sqlite3Isdigit(x)   (sqlite3CtypeMap[(unsigned char)(x)]&0x04)
-# define sqlite3Isxdigit(x)  (sqlite3CtypeMap[(unsigned char)(x)]&0x08)
-# define sqlite3Tolower(x)   (sqlite3UpperToLower[(unsigned char)(x)])
-#else
-# define sqlite3Toupper(x)   toupper((unsigned char)(x))
-# define sqlite3Isspace(x)   isspace((unsigned char)(x))
-# define sqlite3Isalnum(x)   isalnum((unsigned char)(x))
-# define sqlite3Isalpha(x)   isalpha((unsigned char)(x))
-# define sqlite3Isdigit(x)   isdigit((unsigned char)(x))
-# define sqlite3Isxdigit(x)  isxdigit((unsigned char)(x))
-# define sqlite3Tolower(x)   tolower((unsigned char)(x))
-#endif
-#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-int sqlite3IsIdChar(u8);
-#endif
-
-/*
-** Internal function prototypes
-*/
-#define sqlite3StrICmp sqlite3_stricmp
-int sqlite3Strlen30(const char*);
-#define sqlite3StrNICmp sqlite3_strnicmp
-
-int sqlite3MallocInit(void);
-void sqlite3MallocEnd(void);
-void *sqlite3Malloc(u64);
-void *sqlite3MallocZero(u64);
-void *sqlite3DbMallocZero(sqlite3*, u64);
-void *sqlite3DbMallocRaw(sqlite3*, u64);
-char *sqlite3DbStrDup(sqlite3*,const char*);
-char *sqlite3DbStrNDup(sqlite3*,const char*, u64);
-void *sqlite3Realloc(void*, u64);
-void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64);
-void *sqlite3DbRealloc(sqlite3 *, void *, u64);
-void sqlite3DbFree(sqlite3*, void*);
-int sqlite3MallocSize(void*);
-int sqlite3DbMallocSize(sqlite3*, void*);
-void *sqlite3ScratchMalloc(int);
-void sqlite3ScratchFree(void*);
-void *sqlite3PageMalloc(int);
-void sqlite3PageFree(void*);
-void sqlite3MemSetDefault(void);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-void sqlite3BenignMallocHooks(void (*)(void), void (*)(void));
-#endif
-int sqlite3HeapNearlyFull(void);
-
-/*
-** On systems with ample stack space and that support alloca(), make
-** use of alloca() to obtain space for large automatic objects.  By default,
-** obtain space from malloc().
-**
-** The alloca() routine never returns NULL.  This will cause code paths
-** that deal with sqlite3StackAlloc() failures to be unreachable.
-*/
-#ifdef SQLITE_USE_ALLOCA
-# define sqlite3StackAllocRaw(D,N)   alloca(N)
-# define sqlite3StackAllocZero(D,N)  memset(alloca(N), 0, N)
-# define sqlite3StackFree(D,P)       
-#else
-# define sqlite3StackAllocRaw(D,N)   sqlite3DbMallocRaw(D,N)
-# define sqlite3StackAllocZero(D,N)  sqlite3DbMallocZero(D,N)
-# define sqlite3StackFree(D,P)       sqlite3DbFree(D,P)
-#endif
-
-#ifdef SQLITE_ENABLE_MEMSYS3
-const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
-#endif
-#ifdef SQLITE_ENABLE_MEMSYS5
-const sqlite3_mem_methods *sqlite3MemGetMemsys5(void);
-#endif
-
-
-#ifndef SQLITE_MUTEX_OMIT
-  sqlite3_mutex_methods const *sqlite3DefaultMutex(void);
-  sqlite3_mutex_methods const *sqlite3NoopMutex(void);
-  sqlite3_mutex *sqlite3MutexAlloc(int);
-  int sqlite3MutexInit(void);
-  int sqlite3MutexEnd(void);
-#endif
-#if !defined(SQLITE_MUTEX_OMIT) && !defined(SQLITE_MUTEX_NOOP)
-  void sqlite3MemoryBarrier(void);
-#else
-# define sqlite3MemoryBarrier()
-#endif
-
-sqlite3_int64 sqlite3StatusValue(int);
-void sqlite3StatusUp(int, int);
-void sqlite3StatusDown(int, int);
-void sqlite3StatusHighwater(int, int);
-
-/* Access to mutexes used by sqlite3_status() */
-sqlite3_mutex *sqlite3Pcache1Mutex(void);
-sqlite3_mutex *sqlite3MallocMutex(void);
-
-#ifndef SQLITE_OMIT_FLOATING_POINT
-  int sqlite3IsNaN(double);
-#else
-# define sqlite3IsNaN(X)  0
-#endif
-
-/*
-** An instance of the following structure holds information about SQL
-** functions arguments that are the parameters to the printf() function.
-*/
-struct PrintfArguments {
-  int nArg;                /* Total number of arguments */
-  int nUsed;               /* Number of arguments used so far */
-  sqlite3_value **apArg;   /* The argument values */
-};
-
-#define SQLITE_PRINTF_INTERNAL 0x01
-#define SQLITE_PRINTF_SQLFUNC  0x02
-void sqlite3VXPrintf(StrAccum*, u32, const char*, va_list);
-void sqlite3XPrintf(StrAccum*, u32, const char*, ...);
-char *sqlite3MPrintf(sqlite3*,const char*, ...);
-char *sqlite3VMPrintf(sqlite3*,const char*, va_list);
-#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
-  void sqlite3DebugPrintf(const char*, ...);
-#endif
-#if defined(SQLITE_TEST)
-  void *sqlite3TestTextToPtr(const char*);
-#endif
-
-#if defined(SQLITE_DEBUG)
-  void sqlite3TreeViewExpr(TreeView*, const Expr*, u8);
-  void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*);
-  void sqlite3TreeViewSelect(TreeView*, const Select*, u8);
-  void sqlite3TreeViewWith(TreeView*, const With*, u8);
-#endif
-
-
-void sqlite3SetString(char **, sqlite3*, const char*);
-void sqlite3ErrorMsg(Parse*, const char*, ...);
-int sqlite3Dequote(char*);
-int sqlite3KeywordCode(const unsigned char*, int);
-int sqlite3RunParser(Parse*, const char*, char **);
-void sqlite3FinishCoding(Parse*);
-int sqlite3GetTempReg(Parse*);
-void sqlite3ReleaseTempReg(Parse*,int);
-int sqlite3GetTempRange(Parse*,int);
-void sqlite3ReleaseTempRange(Parse*,int,int);
-void sqlite3ClearTempRegCache(Parse*);
-Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int);
-Expr *sqlite3Expr(sqlite3*,int,const char*);
-void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*);
-Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*, const Token*);
-Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*);
-Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*);
-void sqlite3ExprAssignVarNumber(Parse*, Expr*);
-void sqlite3ExprDelete(sqlite3*, Expr*);
-ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*);
-void sqlite3ExprListSetSortOrder(ExprList*,int);
-void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int);
-void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*);
-void sqlite3ExprListDelete(sqlite3*, ExprList*);
-u32 sqlite3ExprListFlags(const ExprList*);
-int sqlite3Init(sqlite3*, char**);
-int sqlite3InitCallback(void*, int, char**, char**);
-void sqlite3Pragma(Parse*,Token*,Token*,Token*,int);
-void sqlite3ResetAllSchemasOfConnection(sqlite3*);
-void sqlite3ResetOneSchema(sqlite3*,int);
-void sqlite3CollapseDatabaseArray(sqlite3*);
-void sqlite3BeginParse(Parse*,int);
-void sqlite3CommitInternalChanges(sqlite3*);
-void sqlite3DeleteColumnNames(sqlite3*,Table*);
-int sqlite3ColumnsFromExprList(Parse*,ExprList*,i16*,Column**);
-Table *sqlite3ResultSetOfSelect(Parse*,Select*);
-void sqlite3OpenMasterTable(Parse *, int);
-Index *sqlite3PrimaryKeyIndex(Table*);
-i16 sqlite3ColumnOfIndex(Index*, i16);
-void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int);
-#if SQLITE_ENABLE_HIDDEN_COLUMNS
-  void sqlite3ColumnPropertiesFromName(Table*, Column*);
-#else
-# define sqlite3ColumnPropertiesFromName(T,C) /* no-op */
-#endif
-void sqlite3AddColumn(Parse*,Token*);
-void sqlite3AddNotNull(Parse*, int);
-void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int);
-void sqlite3AddCheckConstraint(Parse*, Expr*);
-void sqlite3AddColumnType(Parse*,Token*);
-void sqlite3AddDefaultValue(Parse*,ExprSpan*);
-void sqlite3AddCollateType(Parse*, Token*);
-void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*);
-int sqlite3ParseUri(const char*,const char*,unsigned int*,
-                    sqlite3_vfs**,char**,char **);
-Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
-int sqlite3CodeOnce(Parse *);
-
-#ifdef SQLITE_OMIT_BUILTIN_TEST
-# define sqlite3FaultSim(X) SQLITE_OK
-#else
-  int sqlite3FaultSim(int);
-#endif
-
-Bitvec *sqlite3BitvecCreate(u32);
-int sqlite3BitvecTest(Bitvec*, u32);
-int sqlite3BitvecTestNotNull(Bitvec*, u32);
-int sqlite3BitvecSet(Bitvec*, u32);
-void sqlite3BitvecClear(Bitvec*, u32, void*);
-void sqlite3BitvecDestroy(Bitvec*);
-u32 sqlite3BitvecSize(Bitvec*);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-int sqlite3BitvecBuiltinTest(int,int*);
-#endif
-
-RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int);
-void sqlite3RowSetClear(RowSet*);
-void sqlite3RowSetInsert(RowSet*, i64);
-int sqlite3RowSetTest(RowSet*, int iBatch, i64);
-int sqlite3RowSetNext(RowSet*, i64*);
-
-void sqlite3CreateView(Parse*,Token*,Token*,Token*,ExprList*,Select*,int,int);
-
-#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE)
-  int sqlite3ViewGetColumnNames(Parse*,Table*);
-#else
-# define sqlite3ViewGetColumnNames(A,B) 0
-#endif
-
-#if SQLITE_MAX_ATTACHED>30
-  int sqlite3DbMaskAllZero(yDbMask);
-#endif
-void sqlite3DropTable(Parse*, SrcList*, int, int);
-void sqlite3CodeDropTable(Parse*, Table*, int, int);
-void sqlite3DeleteTable(sqlite3*, Table*);
-#ifndef SQLITE_OMIT_AUTOINCREMENT
-  void sqlite3AutoincrementBegin(Parse *pParse);
-  void sqlite3AutoincrementEnd(Parse *pParse);
-#else
-# define sqlite3AutoincrementBegin(X)
-# define sqlite3AutoincrementEnd(X)
-#endif
-void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int);
-void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*);
-IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*);
-int sqlite3IdListIndex(IdList*,const char*);
-SrcList *sqlite3SrcListEnlarge(sqlite3*, SrcList*, int, int);
-SrcList *sqlite3SrcListAppend(sqlite3*, SrcList*, Token*, Token*);
-SrcList *sqlite3SrcListAppendFromTerm(Parse*, SrcList*, Token*, Token*,
-                                      Token*, Select*, Expr*, IdList*);
-void sqlite3SrcListIndexedBy(Parse *, SrcList *, Token *);
-void sqlite3SrcListFuncArgs(Parse*, SrcList*, ExprList*);
-int sqlite3IndexedByLookup(Parse *, struct SrcList_item *);
-void sqlite3SrcListShiftJoinType(SrcList*);
-void sqlite3SrcListAssignCursors(Parse*, SrcList*);
-void sqlite3IdListDelete(sqlite3*, IdList*);
-void sqlite3SrcListDelete(sqlite3*, SrcList*);
-Index *sqlite3AllocateIndexObject(sqlite3*,i16,int,char**);
-Index *sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
-                          Expr*, int, int);
-void sqlite3DropIndex(Parse*, SrcList*, int);
-int sqlite3Select(Parse*, Select*, SelectDest*);
-Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*,
-                         Expr*,ExprList*,u16,Expr*,Expr*);
-void sqlite3SelectDelete(sqlite3*, Select*);
-Table *sqlite3SrcListLookup(Parse*, SrcList*);
-int sqlite3IsReadOnly(Parse*, Table*, int);
-void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int);
-#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY)
-Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,Expr*,char*);
-#endif
-void sqlite3DeleteFrom(Parse*, SrcList*, Expr*);
-void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int);
-WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int);
-void sqlite3WhereEnd(WhereInfo*);
-u64 sqlite3WhereOutputRowCount(WhereInfo*);
-int sqlite3WhereIsDistinct(WhereInfo*);
-int sqlite3WhereIsOrdered(WhereInfo*);
-int sqlite3WhereIsSorted(WhereInfo*);
-int sqlite3WhereContinueLabel(WhereInfo*);
-int sqlite3WhereBreakLabel(WhereInfo*);
-int sqlite3WhereOkOnePass(WhereInfo*, int*);
-#define ONEPASS_OFF      0        /* Use of ONEPASS not allowed */
-#define ONEPASS_SINGLE   1        /* ONEPASS valid for a single row update */
-#define ONEPASS_MULTI    2        /* ONEPASS is valid for multiple rows */
-void sqlite3ExprCodeLoadIndexColumn(Parse*, Index*, int, int, int);
-int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int, u8);
-void sqlite3ExprCodeGetColumnToReg(Parse*, Table*, int, int, int);
-void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int);
-void sqlite3ExprCodeMove(Parse*, int, int, int);
-void sqlite3ExprCacheStore(Parse*, int, int, int);
-void sqlite3ExprCachePush(Parse*);
-void sqlite3ExprCachePop(Parse*);
-void sqlite3ExprCacheRemove(Parse*, int, int);
-void sqlite3ExprCacheClear(Parse*);
-void sqlite3ExprCacheAffinityChange(Parse*, int, int);
-void sqlite3ExprCode(Parse*, Expr*, int);
-void sqlite3ExprCodeCopy(Parse*, Expr*, int);
-void sqlite3ExprCodeFactorable(Parse*, Expr*, int);
-void sqlite3ExprCodeAtInit(Parse*, Expr*, int, u8);
-int sqlite3ExprCodeTemp(Parse*, Expr*, int*);
-int sqlite3ExprCodeTarget(Parse*, Expr*, int);
-void sqlite3ExprCodeAndCache(Parse*, Expr*, int);
-int sqlite3ExprCodeExprList(Parse*, ExprList*, int, int, u8);
-#define SQLITE_ECEL_DUP      0x01  /* Deep, not shallow copies */
-#define SQLITE_ECEL_FACTOR   0x02  /* Factor out constant terms */
-#define SQLITE_ECEL_REF      0x04  /* Use ExprList.u.x.iOrderByCol */
-void sqlite3ExprIfTrue(Parse*, Expr*, int, int);
-void sqlite3ExprIfFalse(Parse*, Expr*, int, int);
-void sqlite3ExprIfFalseDup(Parse*, Expr*, int, int);
-Table *sqlite3FindTable(sqlite3*,const char*, const char*);
-Table *sqlite3LocateTable(Parse*,int isView,const char*, const char*);
-Table *sqlite3LocateTableItem(Parse*,int isView,struct SrcList_item *);
-Index *sqlite3FindIndex(sqlite3*,const char*, const char*);
-void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*);
-void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*);
-void sqlite3Vacuum(Parse*);
-int sqlite3RunVacuum(char**, sqlite3*);
-char *sqlite3NameFromToken(sqlite3*, Token*);
-int sqlite3ExprCompare(Expr*, Expr*, int);
-int sqlite3ExprListCompare(ExprList*, ExprList*, int);
-int sqlite3ExprImpliesExpr(Expr*, Expr*, int);
-void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*);
-void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*);
-int sqlite3FunctionUsesThisSrc(Expr*, SrcList*);
-Vdbe *sqlite3GetVdbe(Parse*);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-void sqlite3PrngSaveState(void);
-void sqlite3PrngRestoreState(void);
-#endif
-void sqlite3RollbackAll(sqlite3*,int);
-void sqlite3CodeVerifySchema(Parse*, int);
-void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb);
-void sqlite3BeginTransaction(Parse*, int);
-void sqlite3CommitTransaction(Parse*);
-void sqlite3RollbackTransaction(Parse*);
-void sqlite3Savepoint(Parse*, int, Token*);
-void sqlite3CloseSavepoints(sqlite3 *);
-void sqlite3LeaveMutexAndCloseZombie(sqlite3*);
-int sqlite3ExprIsConstant(Expr*);
-int sqlite3ExprIsConstantNotJoin(Expr*);
-int sqlite3ExprIsConstantOrFunction(Expr*, u8);
-int sqlite3ExprIsTableConstant(Expr*,int);
-#ifdef SQLITE_ENABLE_CURSOR_HINTS
-int sqlite3ExprContainsSubquery(Expr*);
-#endif
-int sqlite3ExprIsInteger(Expr*, int*);
-int sqlite3ExprCanBeNull(const Expr*);
-int sqlite3ExprNeedsNoAffinityChange(const Expr*, char);
-int sqlite3IsRowid(const char*);
-void sqlite3GenerateRowDelete(
-    Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8,int);
-void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*, int);
-int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int);
-void sqlite3ResolvePartIdxLabel(Parse*,int);
-void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int,
-                                     u8,u8,int,int*);
-void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int);
-int sqlite3OpenTableAndIndices(Parse*, Table*, int, u8, int, u8*, int*, int*);
-void sqlite3BeginWriteOperation(Parse*, int, int);
-void sqlite3MultiWrite(Parse*);
-void sqlite3MayAbort(Parse*);
-void sqlite3HaltConstraint(Parse*, int, int, char*, i8, u8);
-void sqlite3UniqueConstraint(Parse*, int, Index*);
-void sqlite3RowidConstraint(Parse*, int, Table*);
-Expr *sqlite3ExprDup(sqlite3*,Expr*,int);
-ExprList *sqlite3ExprListDup(sqlite3*,ExprList*,int);
-SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int);
-IdList *sqlite3IdListDup(sqlite3*,IdList*);
-Select *sqlite3SelectDup(sqlite3*,Select*,int);
-#if SELECTTRACE_ENABLED
-void sqlite3SelectSetName(Select*,const char*);
-#else
-# define sqlite3SelectSetName(A,B)
-#endif
-void sqlite3FuncDefInsert(FuncDefHash*, FuncDef*);
-FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,int,u8,u8);
-void sqlite3RegisterBuiltinFunctions(sqlite3*);
-void sqlite3RegisterDateTimeFunctions(void);
-void sqlite3RegisterGlobalFunctions(void);
-int sqlite3SafetyCheckOk(sqlite3*);
-int sqlite3SafetyCheckSickOrOk(sqlite3*);
-void sqlite3ChangeCookie(Parse*, int);
-
-#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
-void sqlite3MaterializeView(Parse*, Table*, Expr*, int);
-#endif
-
-#ifndef SQLITE_OMIT_TRIGGER
-  void sqlite3BeginTrigger(Parse*, Token*,Token*,int,int,IdList*,SrcList*,
-                           Expr*,int, int);
-  void sqlite3FinishTrigger(Parse*, TriggerStep*, Token*);
-  void sqlite3DropTrigger(Parse*, SrcList*, int);
-  void sqlite3DropTriggerPtr(Parse*, Trigger*);
-  Trigger *sqlite3TriggersExist(Parse *, Table*, int, ExprList*, int *pMask);
-  Trigger *sqlite3TriggerList(Parse *, Table *);
-  void sqlite3CodeRowTrigger(Parse*, Trigger *, int, ExprList*, int, Table *,
-                            int, int, int);
-  void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int);
-  void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*);
-  void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*);
-  TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*);
-  TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*,
-                                        Select*,u8);
-  TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8);
-  TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*);
-  void sqlite3DeleteTrigger(sqlite3*, Trigger*);
-  void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*);
-  u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int);
-# define sqlite3ParseToplevel(p) ((p)->pToplevel ? (p)->pToplevel : (p))
-# define sqlite3IsToplevel(p) ((p)->pToplevel==0)
-#else
-# define sqlite3TriggersExist(B,C,D,E,F) 0
-# define sqlite3DeleteTrigger(A,B)
-# define sqlite3DropTriggerPtr(A,B)
-# define sqlite3UnlinkAndDeleteTrigger(A,B,C)
-# define sqlite3CodeRowTrigger(A,B,C,D,E,F,G,H,I)
-# define sqlite3CodeRowTriggerDirect(A,B,C,D,E,F)
-# define sqlite3TriggerList(X, Y) 0
-# define sqlite3ParseToplevel(p) p
-# define sqlite3IsToplevel(p) 1
-# define sqlite3TriggerColmask(A,B,C,D,E,F,G) 0
-#endif
-
-int sqlite3JoinType(Parse*, Token*, Token*, Token*);
-void sqlite3CreateForeignKey(Parse*, ExprList*, Token*, ExprList*, int);
-void sqlite3DeferForeignKey(Parse*, int);
-#ifndef SQLITE_OMIT_AUTHORIZATION
-  void sqlite3AuthRead(Parse*,Expr*,Schema*,SrcList*);
-  int sqlite3AuthCheck(Parse*,int, const char*, const char*, const char*);
-  void sqlite3AuthContextPush(Parse*, AuthContext*, const char*);
-  void sqlite3AuthContextPop(AuthContext*);
-  int sqlite3AuthReadCol(Parse*, const char *, const char *, int);
-#else
-# define sqlite3AuthRead(a,b,c,d)
-# define sqlite3AuthCheck(a,b,c,d,e)    SQLITE_OK
-# define sqlite3AuthContextPush(a,b,c)
-# define sqlite3AuthContextPop(a)  ((void)(a))
-#endif
-void sqlite3Attach(Parse*, Expr*, Expr*, Expr*);
-void sqlite3Detach(Parse*, Expr*);
-void sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*);
-int sqlite3FixSrcList(DbFixer*, SrcList*);
-int sqlite3FixSelect(DbFixer*, Select*);
-int sqlite3FixExpr(DbFixer*, Expr*);
-int sqlite3FixExprList(DbFixer*, ExprList*);
-int sqlite3FixTriggerStep(DbFixer*, TriggerStep*);
-int sqlite3AtoF(const char *z, double*, int, u8);
-int sqlite3GetInt32(const char *, int*);
-int sqlite3Atoi(const char*);
-int sqlite3Utf16ByteLen(const void *pData, int nChar);
-int sqlite3Utf8CharLen(const char *pData, int nByte);
-u32 sqlite3Utf8Read(const u8**);
-LogEst sqlite3LogEst(u64);
-LogEst sqlite3LogEstAdd(LogEst,LogEst);
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-LogEst sqlite3LogEstFromDouble(double);
-#endif
-u64 sqlite3LogEstToInt(LogEst);
-
-/*
-** Routines to read and write variable-length integers.  These used to
-** be defined locally, but now we use the varint routines in the util.c
-** file.
-*/
-int sqlite3PutVarint(unsigned char*, u64);
-u8 sqlite3GetVarint(const unsigned char *, u64 *);
-u8 sqlite3GetVarint32(const unsigned char *, u32 *);
-int sqlite3VarintLen(u64 v);
-
-/*
-** The common case is for a varint to be a single byte.  They following
-** macros handle the common case without a procedure call, but then call
-** the procedure for larger varints.
-*/
-#define getVarint32(A,B)  \
-  (u8)((*(A)<(u8)0x80)?((B)=(u32)*(A)),1:sqlite3GetVarint32((A),(u32 *)&(B)))
-#define putVarint32(A,B)  \
-  (u8)(((u32)(B)<(u32)0x80)?(*(A)=(unsigned char)(B)),1:\
-  sqlite3PutVarint((A),(B)))
-#define getVarint    sqlite3GetVarint
-#define putVarint    sqlite3PutVarint
-
-
-const char *sqlite3IndexAffinityStr(sqlite3*, Index*);
-void sqlite3TableAffinity(Vdbe*, Table*, int);
-char sqlite3CompareAffinity(Expr *pExpr, char aff2);
-int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity);
-char sqlite3ExprAffinity(Expr *pExpr);
-int sqlite3Atoi64(const char*, i64*, int, u8);
-int sqlite3DecOrHexToI64(const char*, i64*);
-void sqlite3ErrorWithMsg(sqlite3*, int, const char*,...);
-void sqlite3Error(sqlite3*,int);
-void *sqlite3HexToBlob(sqlite3*, const char *z, int n);
-u8 sqlite3HexToInt(int h);
-int sqlite3TwoPartName(Parse *, Token *, Token *, Token **);
-
-#if defined(SQLITE_NEED_ERR_NAME)
-const char *sqlite3ErrName(int);
-#endif
-
-const char *sqlite3ErrStr(int);
-int sqlite3ReadSchema(Parse *pParse);
-CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int);
-CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
-CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
-Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int);
-Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*);
-Expr *sqlite3ExprSkipCollate(Expr*);
-int sqlite3CheckCollSeq(Parse *, CollSeq *);
-int sqlite3CheckObjectName(Parse *, const char *);
-void sqlite3VdbeSetChanges(sqlite3 *, int);
-int sqlite3AddInt64(i64*,i64);
-int sqlite3SubInt64(i64*,i64);
-int sqlite3MulInt64(i64*,i64);
-int sqlite3AbsInt32(int);
-#ifdef SQLITE_ENABLE_8_3_NAMES
-void sqlite3FileSuffix3(const char*, char*);
-#else
-# define sqlite3FileSuffix3(X,Y)
-#endif
-u8 sqlite3GetBoolean(const char *z,u8);
-
-const void *sqlite3ValueText(sqlite3_value*, u8);
-int sqlite3ValueBytes(sqlite3_value*, u8);
-void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, 
-                        void(*)(void*));
-void sqlite3ValueSetNull(sqlite3_value*);
-void sqlite3ValueFree(sqlite3_value*);
-sqlite3_value *sqlite3ValueNew(sqlite3 *);
-char *sqlite3Utf16to8(sqlite3 *, const void*, int, u8);
-int sqlite3ValueFromExpr(sqlite3 *, Expr *, u8, u8, sqlite3_value **);
-void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8);
-#ifndef SQLITE_AMALGAMATION
-extern const unsigned char sqlite3OpcodeProperty[];
-extern const char sqlite3StrBINARY[];
-extern const unsigned char sqlite3UpperToLower[];
-extern const unsigned char sqlite3CtypeMap[];
-extern const Token sqlite3IntTokens[];
-extern SQLITE_WSD struct Sqlite3Config sqlite3Config;
-extern SQLITE_WSD FuncDefHash sqlite3GlobalFunctions;
-#ifndef SQLITE_OMIT_WSD
-extern int sqlite3PendingByte;
-#endif
-#endif
-void sqlite3RootPageMoved(sqlite3*, int, int, int);
-void sqlite3Reindex(Parse*, Token*, Token*);
-void sqlite3AlterFunctions(void);
-void sqlite3AlterRenameTable(Parse*, SrcList*, Token*);
-int sqlite3GetToken(const unsigned char *, int *);
-void sqlite3NestedParse(Parse*, const char*, ...);
-void sqlite3ExpirePreparedStatements(sqlite3*);
-int sqlite3CodeSubselect(Parse *, Expr *, int, int);
-void sqlite3SelectPrep(Parse*, Select*, NameContext*);
-void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p);
-int sqlite3MatchSpanName(const char*, const char*, const char*, const char*);
-int sqlite3ResolveExprNames(NameContext*, Expr*);
-int sqlite3ResolveExprListNames(NameContext*, ExprList*);
-void sqlite3ResolveSelectNames(Parse*, Select*, NameContext*);
-void sqlite3ResolveSelfReference(Parse*,Table*,int,Expr*,ExprList*);
-int sqlite3ResolveOrderGroupBy(Parse*, Select*, ExprList*, const char*);
-void sqlite3ColumnDefault(Vdbe *, Table *, int, int);
-void sqlite3AlterFinishAddColumn(Parse *, Token *);
-void sqlite3AlterBeginAddColumn(Parse *, SrcList *);
-CollSeq *sqlite3GetCollSeq(Parse*, u8, CollSeq *, const char*);
-char sqlite3AffinityType(const char*, u8*);
-void sqlite3Analyze(Parse*, Token*, Token*);
-int sqlite3InvokeBusyHandler(BusyHandler*);
-int sqlite3FindDb(sqlite3*, Token*);
-int sqlite3FindDbName(sqlite3 *, const char *);
-int sqlite3AnalysisLoad(sqlite3*,int iDB);
-void sqlite3DeleteIndexSamples(sqlite3*,Index*);
-void sqlite3DefaultRowEst(Index*);
-void sqlite3RegisterLikeFunctions(sqlite3*, int);
-int sqlite3IsLikeFunction(sqlite3*,Expr*,int*,char*);
-void sqlite3MinimumFileFormat(Parse*, int, int);
-void sqlite3SchemaClear(void *);
-Schema *sqlite3SchemaGet(sqlite3 *, Btree *);
-int sqlite3SchemaToIndex(sqlite3 *db, Schema *);
-KeyInfo *sqlite3KeyInfoAlloc(sqlite3*,int,int);
-void sqlite3KeyInfoUnref(KeyInfo*);
-KeyInfo *sqlite3KeyInfoRef(KeyInfo*);
-KeyInfo *sqlite3KeyInfoOfIndex(Parse*, Index*);
-#ifdef SQLITE_DEBUG
-int sqlite3KeyInfoIsWriteable(KeyInfo*);
-#endif
-int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *, 
-  void (*)(sqlite3_context*,int,sqlite3_value **),
-  void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*),
-  FuncDestructor *pDestructor
-);
-int sqlite3ApiExit(sqlite3 *db, int);
-int sqlite3OpenTempDatabase(Parse *);
-
-void sqlite3StrAccumInit(StrAccum*, sqlite3*, char*, int, int);
-void sqlite3StrAccumAppend(StrAccum*,const char*,int);
-void sqlite3StrAccumAppendAll(StrAccum*,const char*);
-void sqlite3AppendChar(StrAccum*,int,char);
-char *sqlite3StrAccumFinish(StrAccum*);
-void sqlite3StrAccumReset(StrAccum*);
-void sqlite3SelectDestInit(SelectDest*,int,int);
-Expr *sqlite3CreateColumnExpr(sqlite3 *, SrcList *, int, int);
-
-void sqlite3BackupRestart(sqlite3_backup *);
-void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *);
-
-#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
-void sqlite3AnalyzeFunctions(void);
-int sqlite3Stat4ProbeSetValue(Parse*,Index*,UnpackedRecord**,Expr*,u8,int,int*);
-int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**);
-void sqlite3Stat4ProbeFree(UnpackedRecord*);
-int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**);
-#endif
-
-/*
-** The interface to the LEMON-generated parser
-*/
-void *sqlite3ParserAlloc(void*(*)(u64));
-void sqlite3ParserFree(void*, void(*)(void*));
-void sqlite3Parser(void*, int, Token, Parse*);
-#ifdef YYTRACKMAXSTACKDEPTH
-  int sqlite3ParserStackPeak(void*);
-#endif
-
-void sqlite3AutoLoadExtensions(sqlite3*);
-#ifndef SQLITE_OMIT_LOAD_EXTENSION
-  void sqlite3CloseExtensions(sqlite3*);
-#else
-# define sqlite3CloseExtensions(X)
-#endif
-
-#ifndef SQLITE_OMIT_SHARED_CACHE
-  void sqlite3TableLock(Parse *, int, int, u8, const char *);
-#else
-  #define sqlite3TableLock(v,w,x,y,z)
-#endif
-
-#ifdef SQLITE_TEST
-  int sqlite3Utf8To8(unsigned char*);
-#endif
-
-#ifdef SQLITE_OMIT_VIRTUALTABLE
-#  define sqlite3VtabClear(Y)
-#  define sqlite3VtabSync(X,Y) SQLITE_OK
-#  define sqlite3VtabRollback(X)
-#  define sqlite3VtabCommit(X)
-#  define sqlite3VtabInSync(db) 0
-#  define sqlite3VtabLock(X) 
-#  define sqlite3VtabUnlock(X)
-#  define sqlite3VtabUnlockList(X)
-#  define sqlite3VtabSavepoint(X, Y, Z) SQLITE_OK
-#  define sqlite3GetVTable(X,Y)  ((VTable*)0)
-#else
-   void sqlite3VtabClear(sqlite3 *db, Table*);
-   void sqlite3VtabDisconnect(sqlite3 *db, Table *p);
-   int sqlite3VtabSync(sqlite3 *db, Vdbe*);
-   int sqlite3VtabRollback(sqlite3 *db);
-   int sqlite3VtabCommit(sqlite3 *db);
-   void sqlite3VtabLock(VTable *);
-   void sqlite3VtabUnlock(VTable *);
-   void sqlite3VtabUnlockList(sqlite3*);
-   int sqlite3VtabSavepoint(sqlite3 *, int, int);
-   void sqlite3VtabImportErrmsg(Vdbe*, sqlite3_vtab*);
-   VTable *sqlite3GetVTable(sqlite3*, Table*);
-#  define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0)
-#endif
-int sqlite3VtabEponymousTableInit(Parse*,Module*);
-void sqlite3VtabEponymousTableClear(sqlite3*,Module*);
-void sqlite3VtabMakeWritable(Parse*,Table*);
-void sqlite3VtabBeginParse(Parse*, Token*, Token*, Token*, int);
-void sqlite3VtabFinishParse(Parse*, Token*);
-void sqlite3VtabArgInit(Parse*);
-void sqlite3VtabArgExtend(Parse*, Token*);
-int sqlite3VtabCallCreate(sqlite3*, int, const char *, char **);
-int sqlite3VtabCallConnect(Parse*, Table*);
-int sqlite3VtabCallDestroy(sqlite3*, int, const char *);
-int sqlite3VtabBegin(sqlite3 *, VTable *);
-FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*);
-void sqlite3InvalidFunction(sqlite3_context*,int,sqlite3_value**);
-sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*);
-int sqlite3VdbeParameterIndex(Vdbe*, const char*, int);
-int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *);
-void sqlite3ParserReset(Parse*);
-int sqlite3Reprepare(Vdbe*);
-void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*);
-CollSeq *sqlite3BinaryCompareCollSeq(Parse *, Expr *, Expr *);
-int sqlite3TempInMemory(const sqlite3*);
-const char *sqlite3JournalModename(int);
-#ifndef SQLITE_OMIT_WAL
-  int sqlite3Checkpoint(sqlite3*, int, int, int*, int*);
-  int sqlite3WalDefaultHook(void*,sqlite3*,const char*,int);
-#endif
-#ifndef SQLITE_OMIT_CTE
-  With *sqlite3WithAdd(Parse*,With*,Token*,ExprList*,Select*);
-  void sqlite3WithDelete(sqlite3*,With*);
-  void sqlite3WithPush(Parse*, With*, u8);
-#else
-#define sqlite3WithPush(x,y,z)
-#define sqlite3WithDelete(x,y)
-#endif
-
-/* Declarations for functions in fkey.c. All of these are replaced by
-** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign
-** key functionality is available. If OMIT_TRIGGER is defined but
-** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In
-** this case foreign keys are parsed, but no other functionality is 
-** provided (enforcement of FK constraints requires the triggers sub-system).
-*/
-#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
-  void sqlite3FkCheck(Parse*, Table*, int, int, int*, int);
-  void sqlite3FkDropTable(Parse*, SrcList *, Table*);
-  void sqlite3FkActions(Parse*, Table*, ExprList*, int, int*, int);
-  int sqlite3FkRequired(Parse*, Table*, int*, int);
-  u32 sqlite3FkOldmask(Parse*, Table*);
-  FKey *sqlite3FkReferences(Table *);
-#else
-  #define sqlite3FkActions(a,b,c,d,e,f)
-  #define sqlite3FkCheck(a,b,c,d,e,f)
-  #define sqlite3FkDropTable(a,b,c)
-  #define sqlite3FkOldmask(a,b)         0
-  #define sqlite3FkRequired(a,b,c,d)    0
-#endif
-#ifndef SQLITE_OMIT_FOREIGN_KEY
-  void sqlite3FkDelete(sqlite3 *, Table*);
-  int sqlite3FkLocateIndex(Parse*,Table*,FKey*,Index**,int**);
-#else
-  #define sqlite3FkDelete(a,b)
-  #define sqlite3FkLocateIndex(a,b,c,d,e)
-#endif
-
-
-/*
-** Available fault injectors.  Should be numbered beginning with 0.
-*/
-#define SQLITE_FAULTINJECTOR_MALLOC     0
-#define SQLITE_FAULTINJECTOR_COUNT      1
-
-/*
-** The interface to the code in fault.c used for identifying "benign"
-** malloc failures. This is only present if SQLITE_OMIT_BUILTIN_TEST
-** is not defined.
-*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-  void sqlite3BeginBenignMalloc(void);
-  void sqlite3EndBenignMalloc(void);
-#else
-  #define sqlite3BeginBenignMalloc()
-  #define sqlite3EndBenignMalloc()
-#endif
-
-/*
-** Allowed return values from sqlite3FindInIndex()
-*/
-#define IN_INDEX_ROWID        1   /* Search the rowid of the table */
-#define IN_INDEX_EPH          2   /* Search an ephemeral b-tree */
-#define IN_INDEX_INDEX_ASC    3   /* Existing index ASCENDING */
-#define IN_INDEX_INDEX_DESC   4   /* Existing index DESCENDING */
-#define IN_INDEX_NOOP         5   /* No table available. Use comparisons */
-/*
-** Allowed flags for the 3rd parameter to sqlite3FindInIndex().
-*/
-#define IN_INDEX_NOOP_OK     0x0001  /* OK to return IN_INDEX_NOOP */
-#define IN_INDEX_MEMBERSHIP  0x0002  /* IN operator used for membership test */
-#define IN_INDEX_LOOP        0x0004  /* IN operator used as a loop */
-int sqlite3FindInIndex(Parse *, Expr *, u32, int*);
-
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
-  int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
-  int sqlite3JournalSize(sqlite3_vfs *);
-  int sqlite3JournalCreate(sqlite3_file *);
-  int sqlite3JournalExists(sqlite3_file *p);
-#else
-  #define sqlite3JournalSize(pVfs) ((pVfs)->szOsFile)
-  #define sqlite3JournalExists(p) 1
-#endif
-
-void sqlite3MemJournalOpen(sqlite3_file *);
-int sqlite3MemJournalSize(void);
-int sqlite3IsMemJournal(sqlite3_file *);
-
-void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p);
-#if SQLITE_MAX_EXPR_DEPTH>0
-  int sqlite3SelectExprHeight(Select *);
-  int sqlite3ExprCheckHeight(Parse*, int);
-#else
-  #define sqlite3SelectExprHeight(x) 0
-  #define sqlite3ExprCheckHeight(x,y)
-#endif
-
-u32 sqlite3Get4byte(const u8*);
-void sqlite3Put4byte(u8*, u32);
-
-#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
-  void sqlite3ConnectionBlocked(sqlite3 *, sqlite3 *);
-  void sqlite3ConnectionUnlocked(sqlite3 *db);
-  void sqlite3ConnectionClosed(sqlite3 *db);
-#else
-  #define sqlite3ConnectionBlocked(x,y)
-  #define sqlite3ConnectionUnlocked(x)
-  #define sqlite3ConnectionClosed(x)
-#endif
-
-#ifdef SQLITE_DEBUG
-  void sqlite3ParserTrace(FILE*, char *);
-#endif
-
-/*
-** If the SQLITE_ENABLE IOTRACE exists then the global variable
-** sqlite3IoTrace is a pointer to a printf-like routine used to
-** print I/O tracing messages. 
-*/
-#ifdef SQLITE_ENABLE_IOTRACE
-# define IOTRACE(A)  if( sqlite3IoTrace ){ sqlite3IoTrace A; }
-  void sqlite3VdbeIOTraceSql(Vdbe*);
-SQLITE_API SQLITE_EXTERN void (SQLITE_CDECL *sqlite3IoTrace)(const char*,...);
-#else
-# define IOTRACE(A)
-# define sqlite3VdbeIOTraceSql(X)
-#endif
-
-/*
-** These routines are available for the mem2.c debugging memory allocator
-** only.  They are used to verify that different "types" of memory
-** allocations are properly tracked by the system.
-**
-** sqlite3MemdebugSetType() sets the "type" of an allocation to one of
-** the MEMTYPE_* macros defined below.  The type must be a bitmask with
-** a single bit set.
-**
-** sqlite3MemdebugHasType() returns true if any of the bits in its second
-** argument match the type set by the previous sqlite3MemdebugSetType().
-** sqlite3MemdebugHasType() is intended for use inside assert() statements.
-**
-** sqlite3MemdebugNoType() returns true if none of the bits in its second
-** argument match the type set by the previous sqlite3MemdebugSetType().
-**
-** Perhaps the most important point is the difference between MEMTYPE_HEAP
-** and MEMTYPE_LOOKASIDE.  If an allocation is MEMTYPE_LOOKASIDE, that means
-** it might have been allocated by lookaside, except the allocation was
-** too large or lookaside was already full.  It is important to verify
-** that allocations that might have been satisfied by lookaside are not
-** passed back to non-lookaside free() routines.  Asserts such as the
-** example above are placed on the non-lookaside free() routines to verify
-** this constraint. 
-**
-** All of this is no-op for a production build.  It only comes into
-** play when the SQLITE_MEMDEBUG compile-time option is used.
-*/
-#ifdef SQLITE_MEMDEBUG
-  void sqlite3MemdebugSetType(void*,u8);
-  int sqlite3MemdebugHasType(void*,u8);
-  int sqlite3MemdebugNoType(void*,u8);
-#else
-# define sqlite3MemdebugSetType(X,Y)  /* no-op */
-# define sqlite3MemdebugHasType(X,Y)  1
-# define sqlite3MemdebugNoType(X,Y)   1
-#endif
-#define MEMTYPE_HEAP       0x01  /* General heap allocations */
-#define MEMTYPE_LOOKASIDE  0x02  /* Heap that might have been lookaside */
-#define MEMTYPE_SCRATCH    0x04  /* Scratch allocations */
-#define MEMTYPE_PCACHE     0x08  /* Page cache allocations */
-
-/*
-** Threading interface
-*/
-#if SQLITE_MAX_WORKER_THREADS>0
-int sqlite3ThreadCreate(SQLiteThread**,void*(*)(void*),void*);
-int sqlite3ThreadJoin(SQLiteThread*, void**);
-#endif
-
-#if defined(SQLITE_ENABLE_DBSTAT_VTAB) || defined(SQLITE_TEST)
-int sqlite3DbstatRegister(sqlite3*);
-#endif
-
-#endif /* _SQLITEINT_H_ */