Add AndroidVideoSurfaceChooser to manage overlays.

media/gpu/android_video_decode_accelerator.cc

 // Copyright (c) 2013 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
 #include "media/gpu/android_video_decode_accelerator.h"
 
 #include <stddef.h>
 
 #include <memory>
 
@@ skipping 16 matching lines @@
 #include "gpu/command_buffer/service/mailbox_manager.h"
 #include "gpu/ipc/service/gpu_channel.h"
 #include "media/base/android/media_codec_bridge_impl.h"
 #include "media/base/android/media_codec_util.h"
 #include "media/base/bind_to_current_loop.h"
 #include "media/base/bitstream_buffer.h"
 #include "media/base/limits.h"
 #include "media/base/media.h"
 #include "media/base/timestamp_constants.h"
 #include "media/base/video_decoder_config.h"
+#include "media/gpu/android_video_surface_chooser_impl.h"
 #include "media/gpu/avda_picture_buffer_manager.h"
 #include "media/gpu/content_video_view_overlay.h"
+#include "media/gpu/content_video_view_overlay_factory.h"
 #include "media/gpu/shared_memory_region.h"
 #include "media/video/picture.h"
 #include "ui/gl/android/scoped_java_surface.h"
 #include "ui/gl/android/surface_texture.h"
 #include "ui/gl/gl_bindings.h"
 
 #if defined(ENABLE_MOJO_MEDIA_IN_GPU_PROCESS)
 #include "media/mojo/services/mojo_cdm_service.h"  // nogncheck
 #endif
 
@@ skipping 53 matching lines @@
 constexpr base::TimeDelta DecodePollDelay =
     base::TimeDelta::FromMilliseconds(10);
 
 constexpr base::TimeDelta NoWaitTimeOut = base::TimeDelta::FromMicroseconds(0);
 
 constexpr base::TimeDelta IdleTimerTimeOut = base::TimeDelta::FromSeconds(1);
 
 // On low end devices (< KitKat is always low-end due to buggy MediaCodec),
 // defer the surface creation until the codec is actually used if we know no
 // software fallback exists.
-bool ShouldDeferSurfaceCreation(AVDACodecAllocator* codec_allocator,
-                                int surface_id,
-                                VideoCodec codec) {
-  return surface_id == SurfaceManager::kNoSurfaceID && codec == kCodecH264 &&
-         codec_allocator->IsAnyRegisteredAVDA() &&
-         base::android::BuildInfo::GetInstance()->sdk_int() <= 18;
+bool ShouldDeferSurfaceCreation(
+    AVDACodecAllocator* codec_allocator,
+    int surface_id,
+    VideoCodec codec,
+    const AndroidVideoDecodeAccelerator::PlatformConfig& platform_config) {
+  return platform_config.force_deferred_surface_creation ||
+         (surface_id == SurfaceManager::kNoSurfaceID && codec == kCodecH264 &&
+          codec_allocator->IsAnyRegisteredAVDA() &&
+          platform_config.sdk_int <= 18);
 }
 
 }  // namespace
 
-// AVDAManager manages shared resources for a number of AVDA instances.
-// Its responsibilities include:
-//  - Starting and stopping a shared "construction" thread for instantiating and
-//    releasing MediaCodecs.
-//  - Detecting when a task has hung on the construction thread so AVDAs can
-//    stop using it.
-//  - Running a RepeatingTimer so that AVDAs can get a regular callback to
-//    DoIOTask().
-//  - Tracking the allocation of surfaces to AVDAs and delivering callbacks when
-//    surfaces are released.
+// AVDAManager manages a RepeatingTimer so that AVDAs can get a regular callback
+// to DoIOTask().
 class AVDAManager {
  public:
   AVDAManager() {}
 
   // Request periodic callback of |avda|->DoIOTask(). Does nothing if the
   // instance is already registered and the timer started. The first request
   // will start the repeating timer on an interval of DecodePollDelay.
   void StartTimer(AndroidVideoDecodeAccelerator* avda) {
     DCHECK(thread_checker_.CalledOnValidThread());
 
@@ skipping 62 matching lines @@
   base::ThreadChecker thread_checker_;
 
   DISALLOW_COPY_AND_ASSIGN(AVDAManager);
 };
 
 static AVDAManager* GetManager() {
   static AVDAManager* manager = new AVDAManager();
   return manager;
 }
 
+AndroidVideoDecodeAccelerator::PlatformConfig
+AndroidVideoDecodeAccelerator::PlatformConfig::CreateDefault() {
+  PlatformConfig config;
+
+  config.sdk_int = base::android::BuildInfo::GetInstance()->sdk_int();
+  config.allow_setsurface = MediaCodecUtil::IsSetOutputSurfaceSupported();
+
+  return config;
+}
+
 AndroidVideoDecodeAccelerator::BitstreamRecord::BitstreamRecord(
     const BitstreamBuffer& bitstream_buffer)
     : buffer(bitstream_buffer) {
   if (buffer.id() != -1)
     memory.reset(new SharedMemoryRegion(buffer, true));
 }
 
 AndroidVideoDecodeAccelerator::BitstreamRecord::BitstreamRecord(
     BitstreamRecord&& other)
     : buffer(std::move(other.buffer)), memory(std::move(other.memory)) {}
 
 AndroidVideoDecodeAccelerator::BitstreamRecord::~BitstreamRecord() {}
 
 AndroidVideoDecodeAccelerator::AndroidVideoDecodeAccelerator(
     AVDACodecAllocator* codec_allocator,
+    std::unique_ptr<AndroidVideoSurfaceChooser> surface_chooser,
     const MakeGLContextCurrentCallback& make_context_current_cb,
-    const GetGLES2DecoderCallback& get_gles2_decoder_cb)
+    const GetGLES2DecoderCallback& get_gles2_decoder_cb,
+    const PlatformConfig& platform_config)
     : client_(nullptr),
       codec_allocator_(codec_allocator),
       make_context_current_cb_(make_context_current_cb),
       get_gles2_decoder_cb_(get_gles2_decoder_cb),
-      state_(WAITING_FOR_SURFACE),
+      state_(BEFORE_OVERLAY_INIT),
       picturebuffers_requested_(false),
       picture_buffer_manager_(this),
       media_drm_bridge_cdm_context_(nullptr),
       cdm_registration_id_(0),
       pending_input_buf_index_(-1),
       during_initialize_(false),
       deferred_initialization_pending_(false),
       codec_needs_reset_(false),
       defer_surface_creation_(false),
+      surface_chooser_(std::move(surface_chooser)),
+      platform_config_(platform_config),
       weak_this_factory_(this) {}
 
 AndroidVideoDecodeAccelerator::~AndroidVideoDecodeAccelerator() {
   DCHECK(thread_checker_.CalledOnValidThread());
   GetManager()->StopTimer(this);
   codec_allocator_->StopThread(this);
 
 #if defined(ENABLE_MOJO_MEDIA_IN_GPU_PROCESS)
   if (!media_drm_bridge_cdm_context_)
     return;
@@ skipping 26 matching lines @@
     return false;
   }
 
   DCHECK(client);
   client_ = client;
   config_ = config;
   codec_config_ = new CodecConfig();
   codec_config_->codec = VideoCodecProfileToVideoCodec(config.profile);
   codec_config_->initial_expected_coded_size =
       config.initial_expected_coded_size;
-  incoming_bundle_ = new AVDASurfaceBundle(config_.surface_id);
 
   if (codec_config_->codec != kCodecVP8 && codec_config_->codec != kCodecVP9 &&
 #if BUILDFLAG(ENABLE_HEVC_DEMUXING)
       codec_config_->codec != kCodecHEVC &&
 #endif
       codec_config_->codec != kCodecH264) {
     DLOG(ERROR) << "Unsupported profile: " << GetProfileName(config.profile);
     return false;
   }
 
@@ skipping 21 matching lines @@
   // SetSurface() can't be called before Initialize(), so we pick up our first
   // surface ID from the codec configuration.
   DCHECK(!pending_surface_id_);
 
   // We signaled that we support deferred initialization, so see if the client
   // does also.
   deferred_initialization_pending_ = config.is_deferred_initialization_allowed;
 
   // If we're low on resources, we may decide to defer creation of the surface
   // until the codec is actually used.
-  if (ShouldDeferSurfaceCreation(codec_allocator_, surface_id(),
-                                 codec_config_->codec)) {
+  if (ShouldDeferSurfaceCreation(codec_allocator_, config_.surface_id,
+                                 codec_config_->codec, platform_config_)) {
     // We should never be here if a SurfaceView is required.
-    DCHECK_EQ(surface_id(), SurfaceManager::kNoSurfaceID);
+    // TODO(liberato): This really isn't true with AndroidOverlay.
+    DCHECK_EQ(config_.surface_id, SurfaceManager::kNoSurfaceID);
     defer_surface_creation_ = true;
   }
 
   if (!codec_allocator_->StartThread(this)) {
     LOG(ERROR) << "Unable to start thread";
     return false;
   }
 
   // For encrypted media, start by initializing the CDM.  Otherwise, start with
   // the surface.
   if (config_.is_encrypted()) {
     if (!deferred_initialization_pending_) {
       DLOG(ERROR)
           << "Deferred initialization must be used for encrypted streams";
       return false;
     }
     InitializeCdm();
   } else {
-    StartSurfaceCreation();
+    StartSurfaceChooser();
   }
 
   // Fail / complete / defer initialization.
   return state_ != ERROR;
 }
 
-void AndroidVideoDecodeAccelerator::StartSurfaceCreation() {
-  // We might be called during Initialize, during deferred initialization, or
-  // afterwards (::Decode, for deferred surface init, UpdateSurface).
-  DCHECK(incoming_bundle_);
+void AndroidVideoDecodeAccelerator::StartSurfaceChooser() {
+  DCHECK_EQ(state_, BEFORE_OVERLAY_INIT);
 
-  // We should not yet have an overlay.
-  DCHECK(!incoming_bundle_->overlay);
-
-  // Note that we don't enforce that for any SurfaceTexture or its Surface,
-  // since there might be a codec that's using them.  They'll get cleared
-  // later, in InitializePictureBufferManager.
-
-  // If surface creation is deferred, then do nothing except signal that init
-  // is complete, if needed.  We might still fail to get a surface or codec,
-  // which would normally be an init error.  Since we're deferring init until a
-  // decode to save resources, though, we're signaling success now.  If we're
-  // wrong, then decoding might fail when we might have been able to use a
-  // fallback renderer in WMPI if we failed init.
+  // If we're trying to defer surface creation, then don't notify the helper

[watk, 2017/05/02 22:04:31]

helper

[liberato (no reviews please), 2017/05/02 22:31:37]

Done.

+  // that it may start getting surfaces yet.  We'll do that later.
   if (defer_surface_creation_) {
     if (deferred_initialization_pending_)
       NotifyInitializationSucceeded();
-
     return;
   }
 
-  if (incoming_bundle_->surface_id != SurfaceManager::kNoSurfaceID) {
-    // Create the overlay.  Note that it will never call us back immediately.
-    // It will post when the surface is available.
-    AndroidOverlay::Config overlay_config;
-    // We use weak ptrs here since |overlay| can outlive us, if we send it for
-    // async codec config.
-    overlay_config.ready_cb =
-        base::Bind(&AndroidVideoDecodeAccelerator::OnOverlayReady,
-                   weak_this_factory_.GetWeakPtr());
-    overlay_config.failed_cb =
-        base::Bind(&AndroidVideoDecodeAccelerator::OnOverlayFailed,
-                   weak_this_factory_.GetWeakPtr());
-    overlay_config.destroyed_cb =
-        base::Bind(&AndroidVideoDecodeAccelerator::OnSurfaceDestroyed,
-                   weak_this_factory_.GetWeakPtr());
-    // TODO(liberato): make |surface_id| the overlay config token.  If we're
-    // using CVV, then we'll need a CVV factory impl that understands it.
-    incoming_bundle_->overlay = base::MakeUnique<ContentVideoViewOverlay>(
-        incoming_bundle_->surface_id, overlay_config);
-    // We have to wait for some other AVDA instance to free up the surface.
-    // OnOverlayReady will be called when it's available.
-    // Note that if we aren't deferring init, then we'll signal success, and
-    // if we fail later then it will fail decoding instead.  However, since
-    // nobody that provides a SurfaceView requires sync init, it doesn't matter.
-    // Also remember that ContentVideoViewOverlay will not call OnOverlayReady
-    // before it returns.
-    state_ = WAITING_FOR_SURFACE;
+  // Handle the sync path, which must use SurfaceTexture anyway.  Note that we
+  // check both |during_initialize_| and |deferred_initialization_pending_|,
+  // since we might get here during deferred surface creation.  In that case,
+  // Decode will call us (after clearing |defer_surface_creation_|), but
+  // deferred init will have already been signaled optimistically as success.
+  //
+  // Also note that we might choose to defer surface creation for the sync path,
+  // which won't get here.  We'll exit above, successfully, during init, and
+  // will fall through to the below when Decode calls us back.  That's okay.
+  // We only handle this case specially since |surface_chooser_| is allowed to
+  // post callbacks to us.  Here, we guarantee that the sync case is actually
+  // resolved synchronously.  The only exception will be if we need to defer
+  // surface creation for other reasons, in which case the sync path with just
+  // signal success optimistically.
+  if (during_initialize_ && !deferred_initialization_pending_) {
+    DCHECK_EQ(config_.surface_id, SurfaceManager::kNoSurfaceID);
+    OnSurfaceTransition(nullptr);
     return;
   }
 
-  // We're creating a SurfaceTexture.
-  InitializePictureBufferManager();
+  // If we have a surface, then notify |surface_chooser_| about it.
+  std::unique_ptr<AndroidOverlayFactory> factory;
+  if (config_.surface_id != SurfaceManager::kNoSurfaceID) {
+    factory =
+        base::MakeUnique<ContentVideoViewOverlayFactory>(config_.surface_id);
+  }
+
+  // Notify |surface_chooser_| that we've started.  This guarantees that we'll
+  // get a callback.  It might not be a synchronous callback, but we're not in
+  // the synchronous case.  It will be soon, though.  For pre-M, we rely on the
+  // fact that |surface_chooser_| won't tell us to use a SurfaceTexture while
+  // waiting for an overlay to become ready, for example.
+  surface_chooser_->Initialize(
+      base::Bind(&AndroidVideoDecodeAccelerator::OnSurfaceTransition,
+                 weak_this_factory_.GetWeakPtr()),
+      base::Bind(&AndroidVideoDecodeAccelerator::OnSurfaceTransition,
+                 weak_this_factory_.GetWeakPtr(), nullptr),
+      base::Bind(&AndroidVideoDecodeAccelerator::OnStopUsingOverlayImmediately,
+                 weak_this_factory_.GetWeakPtr()),
+      std::move(factory));
 }
 
-void AndroidVideoDecodeAccelerator::OnOverlayReady(AndroidOverlay* overlay) {
-  DCHECK(!defer_surface_creation_);
-  DCHECK_EQ(state_, WAITING_FOR_SURFACE);
-  DCHECK(incoming_bundle_);
+void AndroidVideoDecodeAccelerator::OnSurfaceTransition(
+    std::unique_ptr<AndroidOverlay> overlay) {
+  // If we're waiting for a surface (e.g., during startup), then proceed
+  // immediately.  Otherwise, wait for Dequeue to handle it.  This can probably
+  // be merged with UpdateSurface.
+  if (state_ == BEFORE_OVERLAY_INIT) {
+    DCHECK(!incoming_overlay_);
+    incoming_bundle_ = new AVDASurfaceBundle(std::move(overlay));
+    InitializePictureBufferManager();
+    return;
+  }
 
-  InitializePictureBufferManager();
-}
+  // If, for some reason, |surface_chooser_| decides that we really should
+  // change our output surface pre-M, ignore it.  For example, if the
+  // compositor tells us that it can't use an overlay, well, there's not much
+  // that we can do here unless we start falling forward to keyframes.
+  if (!platform_config_.allow_setsurface)
+    return;
 
-void AndroidVideoDecodeAccelerator::OnOverlayFailed(AndroidOverlay* overlay) {
-  NOTIFY_ERROR(PLATFORM_FAILURE, "Surface is not available");
+  // If we're using a SurfaceTexture and are told to switch to one, then just
+  // do nothing.  |surface_chooser_| doesn't really know if we've switched to
+  // SurfaceTexture or not.  Note that it can't ask us to switch to the same
+  // overlay we're using, since it's unique_ptr.
+  if (!overlay && codec_config_->surface_bundle &&
+      !codec_config_->surface_bundle->overlay) {
+    // Also stop transitioning to an overlay, if we were doing so.
+    incoming_overlay_.reset();
+    return;
+  }
+
+  incoming_overlay_ = std::move(overlay);
 }
 
 void AndroidVideoDecodeAccelerator::InitializePictureBufferManager() {
   DCHECK(!defer_surface_creation_);
   DCHECK(incoming_bundle_);
 
   if (!make_context_current_cb_.Run()) {
     NOTIFY_ERROR(PLATFORM_FAILURE,
                  "Failed to make this decoder's GL context current");
     incoming_bundle_ = nullptr;
@@ skipping 25 matching lines @@
   // do not try to allocate a new codec; we might not be at a keyframe, etc.
   // If we get here with a codec, then we must setSurface.
   if (media_codec_) {
     // TODO(liberato): fail on api check?
     if (!media_codec_->SetSurface(incoming_bundle_->j_surface().obj())) {
       NOTIFY_ERROR(PLATFORM_FAILURE, "MediaCodec failed to switch surfaces.");
       // We're not going to use |incoming_bundle_|.
     } else {
       // We've switched surfaces, so replace |surface_bundle|.
       codec_config_->surface_bundle = incoming_bundle_;
-      // We could be in WAITING_FOR_SURFACE, but we're not anymore.
+      // We could be in BEFORE_OVERLAY_INIT, but we're not anymore.
       state_ = NO_ERROR;
     }
     incoming_bundle_ = nullptr;
     return;
   }
 
   // We're going to create a codec with |incoming_bundle_|.  It might fail, but
   // either way, we're done with any previous bundle.  Note that, since we
   // never get here after init (i.e., we never change surfaces without using
   // SetSurface), there shouldn't be any previous bundle.  However, this is the
   // right thing to do even if we can switch.
   codec_config_->surface_bundle = incoming_bundle_;
   incoming_bundle_ = nullptr;
 
   // If the client doesn't support deferred initialization (WebRTC), then we
   // should complete it now and return a meaningful result.  Note that it would
   // be nice if we didn't have to worry about starting codec configuration at
   // all (::Initialize or the wrapper can do it), but then they have to remember
   // not to start codec config if we have to wait for the cdm.  It's somewhat
   // clearer for us to handle both cases.
   // For this to be a case for sync configuration, we must be called from
   // Initialize(), and the client must not want deferred init.  Note that having
   // |deferred_initialization_pending_| false by itself isn't enough; if we're
   // deferring surface creation, then we'll finish deferred init before asking
-  // for the surface.  We'll be called via ::Decode.
+  // for the surface.  We'll be called via Decode.
   if (during_initialize_ && !deferred_initialization_pending_) {
     ConfigureMediaCodecSynchronously();
     return;
   }
 
   // In all other cases, we don't have to wait for the codec.
   ConfigureMediaCodecAsynchronously();
 }
 
 void AndroidVideoDecodeAccelerator::DoIOTask(bool start_timer) {
   DCHECK(thread_checker_.CalledOnValidThread());
   TRACE_EVENT0("media", "AVDA::DoIOTask");
   if (state_ == ERROR || state_ == WAITING_FOR_CODEC ||
-      state_ == SURFACE_DESTROYED || state_ == WAITING_FOR_SURFACE) {
+      state_ == SURFACE_DESTROYED || state_ == BEFORE_OVERLAY_INIT) {
     return;
   }
 
   picture_buffer_manager_.MaybeRenderEarly();
   bool did_work = false, did_input = false, did_output = false;
   do {
     did_input = QueueInput();
     did_output = DequeueOutput();
     if (did_input || did_output)
       did_work = true;
   } while (did_input || did_output);
 
   ManageTimer(did_work || start_timer);
 }
 
 bool AndroidVideoDecodeAccelerator::QueueInput() {
   DCHECK(thread_checker_.CalledOnValidThread());
   TRACE_EVENT0("media", "AVDA::QueueInput");
   if (state_ == ERROR || state_ == WAITING_FOR_CODEC ||
-      state_ == WAITING_FOR_KEY || state_ == WAITING_FOR_SURFACE) {
+      state_ == WAITING_FOR_KEY || state_ == BEFORE_OVERLAY_INIT) {
     return false;
   }
   if (bitstreams_notified_in_advance_.size() > kMaxBitstreamsNotifiedInAdvance)
     return false;
   if (pending_bitstream_records_.empty())
     return false;
 
   int input_buf_index = pending_input_buf_index_;
 
   // Do not dequeue a new input buffer if we failed with MEDIA_CODEC_NO_KEY.
@@ skipping 110 matching lines @@
     return false;
   }
 
   return true;
 }
 
 bool AndroidVideoDecodeAccelerator::DequeueOutput() {
   DCHECK(thread_checker_.CalledOnValidThread());
   TRACE_EVENT0("media", "AVDA::DequeueOutput");
   if (state_ == ERROR || state_ == WAITING_FOR_CODEC ||
-      state_ == WAITING_FOR_SURFACE) {
+      state_ == BEFORE_OVERLAY_INIT) {
     return false;
   }
   // If we're draining for reset or destroy, then we don't need picture buffers
   // since we won't send any decoded frames anyway.  There might not be any,
   // since the pipeline might not be sending them back and / or they don't
   // exist anymore.  From the pipeline's point of view, for Destroy at least,
   // the VDA is already gone.
   if (picturebuffers_requested_ && output_picture_buffers_.empty() &&
       !IsDrainingForResetOrDestroy()) {
     return false;
   }
   if (!output_picture_buffers_.empty() && free_picture_ids_.empty() &&
       !IsDrainingForResetOrDestroy()) {
     // Don't have any picture buffer to send. Need to wait.
     return false;
   }
 
   // If we're waiting to switch surfaces pause output release until we have all
   // picture buffers returned. This is so we can ensure the right flags are set
   // on the picture buffers returned to the client.
-  if (pending_surface_id_) {
+  if (incoming_overlay_) {
     if (picture_buffer_manager_.HasUnrenderedPictures())
       return false;
     if (!UpdateSurface())
       return false;
-    // If we can't allocate the incoming surface yet, then stop here.
-    if (state_ != NO_ERROR)
-      return false;
+
+    // UpdateSurface should fail if we've transitioned to the error state.
+    DCHECK(state_ == NO_ERROR);
   }
 
   bool eos = false;
   base::TimeDelta presentation_timestamp;
   int32_t buf_index = 0;
   do {
     size_t offset = 0;
     size_t size = 0;
 
     TRACE_EVENT_BEGIN0("media", "AVDA::DequeueOutput");
@@ skipping 172 matching lines @@
   picture_buffer_manager_.UseCodecBufferForPictureBuffer(codec_buffer_index,
                                                          picture_buffer);
 }
 
 void AndroidVideoDecodeAccelerator::Decode(
     const BitstreamBuffer& bitstream_buffer) {
   DCHECK(thread_checker_.CalledOnValidThread());
 
   // If we deferred getting a surface, then start getting one now.
   if (defer_surface_creation_) {
-    // This is a little strange in that we're not really waiting for a surface
-    // yet -- we haven't requested one.  We're still in WAITING_FOR_SURFACE as
-    // the initial state set during construction.
-    DCHECK_EQ(state_, WAITING_FOR_SURFACE);
+    // We should still be in BEFORE_OVERLAY_INIT, since we've deferred doing it
+    // until now.
+    DCHECK_EQ(state_, BEFORE_OVERLAY_INIT);
     defer_surface_creation_ = false;
-    StartSurfaceCreation();
+    StartSurfaceChooser();
     if (state_ == ERROR) {
       DLOG(ERROR) << "Failed deferred surface and MediaCodec initialization.";
       return;
     }
   }
 
   // If we previously deferred a codec restart, take care of it now. This can
   // happen on older devices where configuration changes require a codec reset.
   if (codec_needs_reset_) {
     DCHECK(!drain_type_);
@@ skipping 87 matching lines @@
 }
 
 void AndroidVideoDecodeAccelerator::Flush() {
   DVLOG(1) << __func__;
   DCHECK(thread_checker_.CalledOnValidThread());
   StartCodecDrain(DRAIN_FOR_FLUSH);
 }
 
 void AndroidVideoDecodeAccelerator::ConfigureMediaCodecAsynchronously() {
   DCHECK(thread_checker_.CalledOnValidThread());
+  DCHECK(!media_codec_);
 
   DCHECK_NE(state_, WAITING_FOR_CODEC);
   state_ = WAITING_FOR_CODEC;
 
-  ReleaseCodec();
-
   base::Optional<TaskType> task_type =
       codec_allocator_->TaskTypeForAllocation();
   if (!task_type) {
     // If there is no free thread, then just fail.
     OnCodecConfigured(nullptr);
     return;
   }
 
   // If autodetection is disallowed, fall back to Chrome's software decoders
   // instead of using the software decoders provided by MediaCodec.
@@ skipping 17 matching lines @@
   base::Optional<TaskType> task_type =
       codec_allocator_->TaskTypeForAllocation();
   if (!task_type) {
     // If there is no free thread, then just fail.
     OnCodecConfigured(nullptr);
     return;
   }
 
   codec_config_->task_type = task_type.value();
   std::unique_ptr<MediaCodecBridge> media_codec =
-      AVDACodecAllocator::GetInstance()->CreateMediaCodecSync(codec_config_);
+      codec_allocator_->CreateMediaCodecSync(codec_config_);
   // Note that |media_codec| might be null, which will NotifyError.
   OnCodecConfigured(std::move(media_codec));
 }
 
 void AndroidVideoDecodeAccelerator::OnCodecConfigured(
     std::unique_ptr<MediaCodecBridge> media_codec) {
   DCHECK(thread_checker_.CalledOnValidThread());
   DCHECK(state_ == WAITING_FOR_CODEC || state_ == SURFACE_DESTROYED);
   // If we are supposed to notify that initialization is complete, then do so
   // before returning.  Otherwise, this is a reconfiguration.
 
+  DCHECK(!media_codec_);
+  media_codec_ = std::move(media_codec);
+
   // If |state_| changed to SURFACE_DESTROYED while we were configuring a codec,
   // then the codec is already invalid so we return early and drop it.
-  // TODO(liberato): We're going to drop the codec when |media_codec| goes out
-  // of scope, on this thread.  We really should post it to the proper thread
-  // to avoid potentially hanging.
   if (state_ == SURFACE_DESTROYED) {
     if (deferred_initialization_pending_) {
       // Losing the output surface is not considered an error state, so notify
-      // success. The client will destroy this soon.
+      // success. The client will destroy |this| soon.
       NotifyInitializationSucceeded();
     }
+
+    // Post it to the right thread.
+    ReleaseCodecAndBundle();
     return;
   }
 
-  DCHECK(!media_codec_);
-  media_codec_ = std::move(media_codec);
   picture_buffer_manager_.CodecChanged(media_codec_.get());
   if (!media_codec_) {
     NOTIFY_ERROR(PLATFORM_FAILURE, "Failed to create MediaCodec");
     return;
   }
 
   if (deferred_initialization_pending_)
     NotifyInitializationSucceeded();
 
   state_ = NO_ERROR;
@@ skipping 69 matching lines @@
   }
   drain_type_.reset();
 }
 
 void AndroidVideoDecodeAccelerator::ResetCodecState() {
   DCHECK(thread_checker_.CalledOnValidThread());
 
   // If there is already a reset in flight, then that counts.  This can really
   // only happen if somebody calls Reset.
   // If the surface is destroyed or we're in an error state there's nothing to
-  // do. Note that WAITING_FOR_SURFACE implies that we have no codec, but it's
+  // do. Note that BEFORE_OVERLAY_INIT implies that we have no codec, but it's
   // included for completeness.
   if (state_ == WAITING_FOR_CODEC || state_ == SURFACE_DESTROYED ||
-      state_ == WAITING_FOR_SURFACE || state_ == ERROR || !media_codec_) {
+      state_ == BEFORE_OVERLAY_INIT || state_ == ERROR || !media_codec_) {
     return;
   }
 
   bitstream_buffers_in_decoder_.clear();
 
   if (pending_input_buf_index_ != -1) {
     // The data for that index exists in the input buffer, but corresponding
     // shm block been deleted. Check that it is safe to flush the codec, i.e.
     // |pending_bitstream_records_| is empty.
     // TODO(timav): keep shm block for that buffer and remove this restriction.
@@ skipping 12 matching lines @@
   // Flush the codec if possible, or create a new one if not.
   if (!MediaCodecUtil::CodecNeedsFlushWorkaround(media_codec_.get())) {
     DVLOG(3) << __func__ << " Flushing MediaCodec.";
     media_codec_->Flush();
     // Since we just flushed all the output buffers, make sure that nothing is
     // using them.
     picture_buffer_manager_.CodecChanged(media_codec_.get());
   } else {
     DVLOG(3) << __func__ << " Deleting the MediaCodec and creating a new one.";
     GetManager()->StopTimer(this);
-    // Note that this will release the codec, then allocate a new one.  It will
-    // not wait for the old one to finish up with the surface, which is bad.
-    // It works (usually) because it ends up allocating the codec on the same
+    // Release the codec, retain the bundle, and allocate a new codec.  It will
+    // not wait for the old one to finish up with the bundle, which is bad.  It
+    // works (usually) because it ends up allocating the codec on the same
     // thread as is used to release the old one, so it's serialized anyway.
+    ReleaseCodec();
     ConfigureMediaCodecAsynchronously();
   }
 }
 
 void AndroidVideoDecodeAccelerator::Reset() {
   DVLOG(1) << __func__;
   DCHECK(thread_checker_.CalledOnValidThread());
   TRACE_EVENT0("media", "AVDA::Reset");
 
   if (defer_surface_creation_) {
     DCHECK(!media_codec_);
     DCHECK(pending_bitstream_records_.empty());
-    DCHECK_EQ(state_, WAITING_FOR_SURFACE);
+    DCHECK_EQ(state_, BEFORE_OVERLAY_INIT);
     base::ThreadTaskRunnerHandle::Get()->PostTask(
         FROM_HERE, base::Bind(&AndroidVideoDecodeAccelerator::NotifyResetDone,
                               weak_this_factory_.GetWeakPtr()));
     return;
   }
 
   while (!pending_bitstream_records_.empty()) {
     int32_t bitstream_buffer_id =
         pending_bitstream_records_.front().buffer.id();
     pending_bitstream_records_.pop();
 
     if (bitstream_buffer_id != -1) {
       base::ThreadTaskRunnerHandle::Get()->PostTask(
           FROM_HERE,
           base::Bind(&AndroidVideoDecodeAccelerator::NotifyEndOfBitstreamBuffer,
                      weak_this_factory_.GetWeakPtr(), bitstream_buffer_id));
     }
   }
   TRACE_COUNTER1("media", "AVDA::PendingBitstreamBufferCount", 0);
   bitstreams_notified_in_advance_.clear();
 
   picture_buffer_manager_.ReleaseCodecBuffers(output_picture_buffers_);
   StartCodecDrain(DRAIN_FOR_RESET);
 }
 
 void AndroidVideoDecodeAccelerator::SetSurface(int32_t surface_id) {
   DVLOG(1) << __func__;
   DCHECK(thread_checker_.CalledOnValidThread());
 
-  if (surface_id == this->surface_id()) {
-    pending_surface_id_.reset();
+  // It's possible that we'll receive a SetSurface before initializing the
+  // overlay helper.  For example, if we defer surface creation, then we'll

[watk, 2017/05/02 22:04:31]

overlay helper

[liberato (no reviews please), 2017/05/02 22:31:37]

Done.

+  // signal success to WMPI before initializing it.  WMPI is free to change the
+  // surface.  In this case, just pretend that |surface_id| is the initial one.
+  if (state_ == BEFORE_OVERLAY_INIT) {
+    config_.surface_id = surface_id;
     return;
   }
 
-  // Surface changes never take effect immediately, they will be handled during
-  // DequeOutput() once we get to a good switch point or immediately during an
-  // OnSurfaceDestroyed() call.
-  pending_surface_id_ = surface_id;
+  std::unique_ptr<AndroidOverlayFactory> factory;
+  if (surface_id != SurfaceManager::kNoSurfaceID)
+    factory = base::MakeUnique<ContentVideoViewOverlayFactory>(surface_id);
+
+  surface_chooser_->ReplaceOverlayFactory(std::move(factory));
 }
 
 void AndroidVideoDecodeAccelerator::Destroy() {
   DVLOG(1) << __func__;
   DCHECK(thread_checker_.CalledOnValidThread());
 
   picture_buffer_manager_.Destroy(output_picture_buffers_);
   client_ = nullptr;
 
   // We don't want to queue more inputs while draining.
   std::queue<BitstreamRecord>().swap(pending_bitstream_records_);
   StartCodecDrain(DRAIN_FOR_DESTROY);
 }
 
 void AndroidVideoDecodeAccelerator::ActualDestroy() {
   DVLOG(1) << __func__;
   DCHECK(thread_checker_.CalledOnValidThread());
 
   // Note that async codec construction might still be in progress.  In that
   // case, the codec will be deleted when it completes once we invalidate all
   // our weak refs.
   weak_this_factory_.InvalidateWeakPtrs();
   GetManager()->StopTimer(this);
-  ReleaseCodec();
+  ReleaseCodecAndBundle();
 
   delete this;
 }
 
 bool AndroidVideoDecodeAccelerator::TryToSetupDecodeOnSeparateThread(
     const base::WeakPtr<Client>& decode_client,
     const scoped_refptr<base::SingleThreadTaskRunner>& decode_task_runner) {
   return false;
 }
 
 const gfx::Size& AndroidVideoDecodeAccelerator::GetSize() const {
   return size_;
 }
 
 base::WeakPtr<gpu::gles2::GLES2Decoder>
 AndroidVideoDecodeAccelerator::GetGlDecoder() const {
   return get_gles2_decoder_cb_.Run();
 }
 
-void AndroidVideoDecodeAccelerator::OnSurfaceDestroyed(
+void AndroidVideoDecodeAccelerator::OnStopUsingOverlayImmediately(
     AndroidOverlay* overlay) {
   DVLOG(1) << __func__;
-  TRACE_EVENT0("media", "AVDA::OnSurfaceDestroyed");
+  TRACE_EVENT0("media", "AVDA::OnStopUsingOverlayImmediately");
   DCHECK(thread_checker_.CalledOnValidThread());
 
   // We cannot get here if we're before surface allocation, since we transition
   // to WAITING_FOR_CODEC (or NO_ERROR, if sync) when we get the surface without
   // posting.  If we do ever lose the surface before starting codec allocation,
   // then we could just update the config to use a SurfaceTexture and return
   // without changing state.
-  DCHECK_NE(state_, WAITING_FOR_SURFACE);
+  DCHECK_NE(state_, BEFORE_OVERLAY_INIT);
+
+  // If we're transitioning to |overlay|, then just stop here.  We're not also
+  // using the overlay if we're transitioning to it.
+  if (incoming_overlay_->get() == overlay) {
+    incoming_overlay_.reset();
+    return;
+  }
+
+  // If we have no codec, or if our current config doesn't refer to |overlay|,
+  // then do nothing.  |overlay| might be for some overlay that's waiting for
+  // codec destruction on some other thread.
+  if (!codec_config_->surface_bundle ||
+      codec_config_->surface_bundle->overlay.get() != overlay) {
+    return;
+  }
+
+  // If we have a codec, or if codec allocation is in flight, then it's using an
+  // overlay that was destroyed.
+  if (state_ == WAITING_FOR_CODEC) {
+    // What we should do here is to set |incoming_overlay_| to nullptr, to start
+    // a transistion to SurfaceTexture.  OnCodecConfigured could notice that
+    // there's an incoming overlay, and then immediately transition the codec /
+    // drop and re-allocate the codec using it.  However, for CVV, that won't
+    // work, since CVV-based overlays block the main thread waiting for the
+    // overlay to be dropped, so OnCodecConfigured won't run.  For DS, it's the
+    // right thing.
+    // So, for now, we just fail, and let OnCodecConfigured drop the codec.
+    // Note that this case really can only happen on pre-M anyway, unless it's
+    // during initial construction.  This will result in the overlay being
+    // destroyed after timeout, since OnCodecConfigured can't run until the
+    // synchronous CVV destruction quits.
+    state_ = SURFACE_DESTROYED;
+    return;
+  }
 
   // If the API is available avoid having to restart the decoder in order to
   // leave fullscreen. If we don't clear the surface immediately during this
   // callback, the MediaCodec will throw an error as the surface is destroyed.
-  if (base::android::BuildInfo::GetInstance()->sdk_int() >= 23) {
+  if (platform_config_.allow_setsurface) {
     // Since we can't wait for a transition, we must invalidate all outstanding
     // picture buffers to avoid putting the GL system in a broken state.
     picture_buffer_manager_.ReleaseCodecBuffers(output_picture_buffers_);
 
-    // Switch away from the surface being destroyed to a surface texture.
-    DCHECK_NE(surface_id(), SurfaceManager::kNoSurfaceID);
+    // If we aren't transitioning to some other surface, then transition to a
+    // SurfaceTexture.  Remember that, if |incoming_overlay_| is an overlay,
+    // then it's already ready and can be transitioned to immediately.  We were
+    // just waiting for codec buffers to come back, but we just dropped them.
+    // Note that we want |incoming_overlay_| to has_value(), but that value
+    // should be a nullptr to indicate that we should switch to SurfaceTexture.
+    if (!incoming_overlay_)
+      incoming_overlay_ = std::unique_ptr<AndroidOverlay>();
 
-    // The leaving fullscreen notification may come in before this point.
-    if (pending_surface_id_)
-      DCHECK_EQ(pending_surface_id_.value(), SurfaceManager::kNoSurfaceID);
-
-    pending_surface_id_ = SurfaceManager::kNoSurfaceID;
     UpdateSurface();
     // Switching to a SurfaceTexture should never need to wait.  If it does,
     // then the codec might still be using the destroyed surface, which is bad.
-    DCHECK_NE(state_, WAITING_FOR_SURFACE);
     return;
   }
 
   // If we're currently asynchronously configuring a codec, it will be destroyed
   // when configuration completes and it notices that |state_| has changed to
   // SURFACE_DESTROYED.
   state_ = SURFACE_DESTROYED;
-  ReleaseCodec();
+  ReleaseCodecAndBundle();
 
   // If we're draining, signal completion now because the drain can no longer
   // proceed.
   if (drain_type_)
     OnDrainCompleted();
 }
 
 void AndroidVideoDecodeAccelerator::InitializeCdm() {
   DVLOG(2) << __func__ << ": " << config_.cdm_id;
 
@@ skipping 48 matching lines @@
 
   // We assume this is a part of the initialization process, thus MediaCodec
   // is not created yet.
   DCHECK(!media_codec_);
   DCHECK(deferred_initialization_pending_);
 
   codec_config_->media_crypto = std::move(media_crypto);
   codec_config_->needs_protected_surface = needs_protected_surface;
 
   // After receiving |media_crypto_| we can start with surface creation.
-  StartSurfaceCreation();
+  StartSurfaceChooser();
 }
 
 void AndroidVideoDecodeAccelerator::OnKeyAdded() {
   DVLOG(1) << __func__;
 
   // This can also be called before initial surface allocation has completed,
   // so we might not have a surface / codec yet.  In that case, we'll never
   // transition to WAITING_FOR_KEY, which is fine.
   if (state_ == WAITING_FOR_KEY)
     state_ = NO_ERROR;
@@ skipping 169 matching lines @@
 
 bool AndroidVideoDecodeAccelerator::IsMediaCodecSoftwareDecodingForbidden()
     const {
   // Prevent MediaCodec from using its internal software decoders when we have
   // more secure and up to date versions in the renderer process.
   return !config_.is_encrypted() && (codec_config_->codec == kCodecVP8 ||
                                      codec_config_->codec == kCodecVP9);
 }
 
 bool AndroidVideoDecodeAccelerator::UpdateSurface() {
-  DCHECK(pending_surface_id_);
-  DCHECK_NE(surface_id(), pending_surface_id_.value());
-  DCHECK(surface_id() == SurfaceManager::kNoSurfaceID ||
-         pending_surface_id_.value() == SurfaceManager::kNoSurfaceID);
-
-  const int new_surface_id = pending_surface_id_.value();
-  pending_surface_id_.reset();
+  DCHECK(incoming_overlay_);
 
   // Start surface creation.  Note that if we're called via surfaceDestroyed,
   // then this must complete synchronously or it will DCHECK.  Otherwise, we
   // might still be using the destroyed surface.  We don't enforce this, but
   // it's worth remembering that there are cases where it's required.
   // Note that we don't re-use |surface_bundle|, since the codec is using it!
-  incoming_bundle_ = new AVDASurfaceBundle(new_surface_id);
-  StartSurfaceCreation();
+  incoming_bundle_ =
+      new AVDASurfaceBundle(std::move(incoming_overlay_.value()));
+  incoming_overlay_.reset();
+  InitializePictureBufferManager();
   if (state_ == ERROR) {
     // This might be called from OnSurfaceDestroyed(), so we have to release the
     // MediaCodec if we failed to switch the surface.  We reset the surface ID
     // to the previous one, since failures never result in the codec using the
     // new surface.  This is only guaranteed because of how OnCodecConfigured
     // works.  If it could fail after getting a codec, then this assumption
     // wouldn't be necessarily true anymore.
     // Also note that we might not have switched surfaces yet, which is also bad
-    // for OnSurfaceDestroyed, because of WAITING_FOR_SURFACE.  Shouldn't
+    // for OnSurfaceDestroyed, because of BEFORE_OVERLAY_INIT.  Shouldn't
     // happen with SurfaceTexture, and OnSurfaceDestroyed checks for it.  In
     // either case, we definitely should not still have an incoming bundle; it
     // should have been dropped.
     DCHECK(!incoming_bundle_);
-    ReleaseCodec();
+    ReleaseCodecAndBundle();
   }
 
   return state_ != ERROR;
 }
 
 void AndroidVideoDecodeAccelerator::ReleaseCodec() {
   if (!media_codec_)
     return;
 
   picture_buffer_manager_.CodecChanged(nullptr);
   codec_allocator_->ReleaseMediaCodec(std::move(media_codec_),
                                       codec_config_->task_type,
                                       codec_config_->surface_bundle);
 }
 
+void AndroidVideoDecodeAccelerator::ReleaseCodecAndBundle() {
+  ReleaseCodec();
+  codec_config_->surface_bundle = nullptr;
+}
+
 }  // namespace media