Add set_autohide_systemui to wayland protocol

third_party/wayland-protocols/include/protocol/remote-shell-unstable-v1-server-protocol.h

 /* Generated by wayland-scanner 1.11.0 */
 
 #ifndef REMOTE_SHELL_UNSTABLE_V1_SERVER_PROTOCOL_H
 #define REMOTE_SHELL_UNSTABLE_V1_SERVER_PROTOCOL_H
 
 #include <stdint.h>
 #include <stddef.h>
 #include "wayland-server.h"
 
 #ifdef  __cplusplus
@@ skipping 214 matching lines @@
          * multiple windows
          */
         ZCR_REMOTE_SHELL_V1_LAYOUT_MODE_WINDOWED = 1,
         /**
          * restricted mode for tablet
          */
         ZCR_REMOTE_SHELL_V1_LAYOUT_MODE_TABLET = 2,
 };
 #endif /* ZCR_REMOTE_SHELL_V1_LAYOUT_MODE_ENUM */
 
+#ifndef ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM
+#define ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM
+/**
+ * @ingroup iface_zcr_remote_surface_v1
+ * systemui visibility behavior
+ *
+ * Determine the visibility of the system UI.
+ */
+enum zcr_remote_surface_v1_systemui_visibility_state {
+  /**
+   * systemui is visible
+   */
+  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_VISIBLE = 1,
+  /**
+   * systemui autohides and is not sticky
+   */
+  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_NON_STICKY = 2,
+  /**
+   * systemui autohides and is sticky
+   */
+  ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_AUTOHIDE_STICKY = 3,
+};
+#endif /* ZCR_REMOTE_SURFACE_V1_SYSTEMUI_VISIBILITY_STATE_ENUM */
+
 /**
  * @ingroup iface_zcr_remote_shell_v1
  * @struct zcr_remote_shell_v1_interface
  */
 struct zcr_remote_shell_v1_interface {
         /**
          * destroy remote_shell
          *
          * Destroy this remote_shell object.
          *
@@ skipping 43 matching lines @@
  * @ingroup iface_zcr_remote_shell_v1
  */
 #define ZCR_REMOTE_SHELL_V1_ACTIVATED_SINCE_VERSION 1
 /**
  * @ingroup iface_zcr_remote_shell_v1
  */
 #define ZCR_REMOTE_SHELL_V1_CONFIGURATION_CHANGED_SINCE_VERSION 1
 /**
  * @ingroup iface_zcr_remote_shell_v1
  */
-#define ZCR_REMOTE_SHELL_V1_WORKSPACE_SINCE_VERSION 3
+#define ZCR_REMOTE_SHELL_V1_WORKSPACE_SINCE_VERSION 4
 /**
  * @ingroup iface_zcr_remote_shell_v1
  */
-#define ZCR_REMOTE_SHELL_V1_CONFIGURE_SINCE_VERSION 3
+#define ZCR_REMOTE_SHELL_V1_CONFIGURE_SINCE_VERSION 4
 
 /**
  * @ingroup iface_zcr_remote_shell_v1
  */
 #define ZCR_REMOTE_SHELL_V1_DESTROY_SINCE_VERSION 1
 /**
  * @ingroup iface_zcr_remote_shell_v1
  */
 #define ZCR_REMOTE_SHELL_V1_GET_REMOTE_SURFACE_SINCE_VERSION 1
 /**
@@ skipping 287 matching lines @@
          * and specifies inner bounds of the shadow. Specifying zero width
          * and height will disable the shadow.
          * @since 2
          */
         void (*set_rectangular_surface_shadow)(struct wl_client *client,
                                                struct wl_resource *resource,
                                                int32_t x,
                                                int32_t y,
                                                int32_t width,
                                                int32_t height);
-        /**
-         * ack a configure event
-         *
-         * When a configure event is received, if a client commits the
-         * surface in response to the configure event, then the client must
-         * make an ack_configure request sometime before the commit
-         * request, passing along the serial of the configure event.
-         *
-         * For instance, the compositor might use this information during
-         * display configuration to change its coordinate space for
-         * set_window_geometry requests only when the client has switched
-         * to the new coordinate space.
-         *
-         * If the client receives multiple configure events before it can
-         * respond to one, it only has to ack the last configure event.
-         *
-         * A client is not required to commit immediately after sending an
-         * ack_configure request - it may even ack_configure several times
-         * before its next surface commit.
-         *
-         * A client may send multiple ack_configure requests before
-         * committing, but only the last request sent before a commit
-         * indicates which configure event the client really is responding
-         * to.
-         * @param serial the serial from the configure event
-         * @since 3
-         */
-        void (*ack_configure)(struct wl_client *client,
-                              struct wl_resource *resource,
-                              uint32_t serial);
-        /**
-         * start an interactive move
-         *
-         * Start an interactive, user-driven move of the surface.
-         *
-         * The compositor responds to this request with a configure event
-         * that transitions to the "moving" state. The client must only
-         * initiate motion after acknowledging the state change. The
-         * compositor can assume that subsequent set_window_geometry
-         * requests are position updates until the next state transition is
-         * acknowledged.
-         *
-         * The compositor may ignore move requests depending on the state
-         * of the surface, e.g. fullscreen or maximized.
-         * @since 3
-         */
-        void (*move)(struct wl_client *client,
-                     struct wl_resource *resource);
+
+        /**
+         * requests the system ui visibility behavior for the surface
+         *
+         * Requests how the surface will change the system UI visibility when it
+         * is made* active.
+         *
+         * @since 3
+         */
+        void (*set_systemui_visibility)(struct wl_client* client,
+                                        struct wl_resource* resource,
+                                        uint32_t visibility);
+
+        /**
+         * ack a configure event
+         *
+         * When a configure event is received, if a client commits the
+         * surface in response to the configure event, then the client must
+         * make an ack_configure request sometime before the commit
+         * request, passing along the serial of the configure event.
+         *
+         * For instance, the compositor might use this information during
+         * display configuration to change its coordinate space for
+         * set_window_geometry requests only when the client has switched
+         * to the new coordinate space.
+         *
+         * If the client receives multiple configure events before it can
+         * respond to one, it only has to ack the last configure event.
+         *
+         * A client is not required to commit immediately after sending an
+         * ack_configure request - it may even ack_configure several times
+         * before its next surface commit.
+         *
+         * A client may send multiple ack_configure requests before
+         * committing, but only the last request sent before a commit
+         * indicates which configure event the client really is responding
+         * to.
+         * @param serial the serial from the configure event
+         * @since 4
+         */
+        void (*ack_configure)(struct wl_client* client,
+                              struct wl_resource* resource,
+                              uint32_t serial);
+        /**
+         * start an interactive move
+         *
+         * Start an interactive, user-driven move of the surface.
+         *
+         * The compositor responds to this request with a configure event
+         * that transitions to the "moving" state. The client must only
+         * initiate motion after acknowledging the state change. The
+         * compositor can assume that subsequent set_window_geometry
+         * requests are position updates until the next state transition is
+         * acknowledged.
+         *
+         * The compositor may ignore move requests depending on the state
+         * of the surface, e.g. fullscreen or maximized.
+         * @since 4
+         */
+        void (*move)(struct wl_client* client, struct wl_resource* resource);
 };
 
 #define ZCR_REMOTE_SURFACE_V1_CLOSE 0
 #define ZCR_REMOTE_SURFACE_V1_STATE_TYPE_CHANGED 1
 #define ZCR_REMOTE_SURFACE_V1_CONFIGURE 2
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
 #define ZCR_REMOTE_SURFACE_V1_CLOSE_SINCE_VERSION 1
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
 #define ZCR_REMOTE_SURFACE_V1_STATE_TYPE_CHANGED_SINCE_VERSION 1
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
-#define ZCR_REMOTE_SURFACE_V1_CONFIGURE_SINCE_VERSION 3
+#define ZCR_REMOTE_SURFACE_V1_CONFIGURE_SINCE_VERSION 4
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
 #define ZCR_REMOTE_SURFACE_V1_DESTROY_SINCE_VERSION 1
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
 #define ZCR_REMOTE_SURFACE_V1_SET_APP_ID_SINCE_VERSION 1
 /**
@@ skipping 60 matching lines @@
  * @ingroup iface_zcr_remote_surface_v1
  */
 #define ZCR_REMOTE_SURFACE_V1_UNSET_SYSTEM_MODAL_SINCE_VERSION 1
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
 #define ZCR_REMOTE_SURFACE_V1_SET_RECTANGULAR_SURFACE_SHADOW_SINCE_VERSION 2
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
-#define ZCR_REMOTE_SURFACE_V1_ACK_CONFIGURE_SINCE_VERSION 3
+#define ZCR_REMOTE_SURFACE_V1_SET_SYSTEMUI_VISIBILITY_SINCE_VERSION 3
 /**
  * @ingroup iface_zcr_remote_surface_v1
  */
-#define ZCR_REMOTE_SURFACE_V1_MOVE_SINCE_VERSION 3
+#define ZCR_REMOTE_SURFACE_V1_ACK_CONFIGURE_SINCE_VERSION 4
+/**
+ * @ingroup iface_zcr_remote_surface_v1
+ */
+#define ZCR_REMOTE_SURFACE_V1_MOVE_SINCE_VERSION 4
 
 /**
  * @ingroup iface_zcr_remote_surface_v1
  * Sends an close event to the client owning the resource.
  * @param resource_ The client's resource
  */
 static inline void
 zcr_remote_surface_v1_send_close(struct wl_resource *resource_)
 {
         wl_resource_post_event(resource_, ZCR_REMOTE_SURFACE_V1_CLOSE);
@@ skipping 39 matching lines @@
 /**
  * @ingroup iface_zcr_notification_surface_v1
  */
 #define ZCR_NOTIFICATION_SURFACE_V1_DESTROY_SINCE_VERSION 1
 
 #ifdef  __cplusplus
 }
 #endif
 
 #endif