[sql] Import SQLite 3.17.0.

third_party/sqlite/amalgamation/sqlite3.h

 /*
 ** 2001 September 15
 **
 ** The author disclaims copyright to this source code.  In place of
 ** a legal notice, here is a blessing:
 **
 **    May you do good and not evil.
 **    May you find forgiveness for yourself and forgive others.
 **    May you share freely, never taking more than you give.
 **
@@ skipping 12 matching lines @@
 **
 ** The official C-language API documentation for SQLite is derived
 ** from comments in this file.  This file is the authoritative source
 ** on how SQLite interfaces are supposed to operate.
 **
 ** The name of this file under configuration management is "sqlite.h.in".
 ** The makefile makes some minor changes to this file (such as inserting
 ** the version number) and changes its name to "sqlite3.h" as
 ** part of the build process.
 */
-#ifndef _SQLITE3_H_
-#define _SQLITE3_H_
+#ifndef SQLITE3_H
+#define SQLITE3_H
 #include <stdarg.h>     /* Needed for the definition of va_list */
 
 /*
 ** Make sure we can call this stuff from C++.
 */
 #ifdef __cplusplus
 extern "C" {
 #endif
 
 
 /*
 ** Provide the ability to override linkage features of the interface.
 */
 #ifndef SQLITE_EXTERN
 # define SQLITE_EXTERN extern
 #endif
 #ifndef SQLITE_API
 # define SQLITE_API
 #endif
 #ifndef SQLITE_CDECL
 # define SQLITE_CDECL
 #endif
+#ifndef SQLITE_APICALL
+# define SQLITE_APICALL
+#endif
 #ifndef SQLITE_STDCALL
-# define SQLITE_STDCALL
+# define SQLITE_STDCALL SQLITE_APICALL
+#endif
+#ifndef SQLITE_CALLBACK
+# define SQLITE_CALLBACK
+#endif
+#ifndef SQLITE_SYSAPI
+# define SQLITE_SYSAPI
 #endif
 
 /*
 ** These no-op macros are used in front of interfaces to mark those
 ** interfaces as either deprecated or experimental.  New applications
 ** should not use deprecated interfaces - they are supported for backwards
 ** compatibility only.  Application writers should be aware that
 ** experimental interfaces are subject to change in point releases.
 **
 ** These macros used to resolve to various kinds of compiler magic that
@@ skipping 23 matching lines @@
 ** format "X.Y.Z" where X is the major version number (always 3 for
 ** SQLite3) and Y is the minor version number and Z is the release number.)^
 ** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer
 ** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same
 ** numbers used in [SQLITE_VERSION].)^
 ** The SQLITE_VERSION_NUMBER for any given release of SQLite will also
 ** be larger than the release from which it is derived.  Either Y will
 ** be held constant and Z will be incremented or else Y will be incremented
 ** and Z will be reset to zero.
 **
-** Since version 3.6.18, SQLite source code has been stored in the
+** Since [version 3.6.18] ([dateof:3.6.18]), 
+** SQLite source code has been stored in the
 ** <a href="http://www.fossil-scm.org/">Fossil configuration management
 ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
 ** a string which identifies a particular check-in of SQLite
 ** within its configuration management system.  ^The SQLITE_SOURCE_ID
 ** string contains the date and time of the check-in (UTC) and an SHA1
 ** hash of the entire source tree.
 **
 ** See also: [sqlite3_libversion()],
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.10.2"
-#define SQLITE_VERSION_NUMBER 3010002
-#define SQLITE_SOURCE_ID      "2016-01-20 15:27:19 17efb4209f97fb4971656086b138599a91a75ff9"
+#define SQLITE_VERSION        "3.17.0"
+#define SQLITE_VERSION_NUMBER 3017000
+#define SQLITE_SOURCE_ID      "2017-02-13 16:02:40 ada05cfa86ad7f5645450ac7a2a21c9aa6e57d2c"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
-** KEYWORDS: sqlite3_version, sqlite3_sourceid
+** KEYWORDS: sqlite3_version sqlite3_sourceid
 **
 ** These interfaces provide the same information as the [SQLITE_VERSION],
 ** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
 ** but are associated with the library instead of the header file.  ^(Cautious
 ** programmers might include assert() statements in their application to
 ** verify that values returned by these interfaces match the macros in
 ** the header, and thus ensure that the application is
 ** compiled with matching library and header files.
 **
 ** <blockquote><pre>
 ** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
 ** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
 ** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
 ** </pre></blockquote>)^
 **
 ** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION]
 ** macro.  ^The sqlite3_libversion() function returns a pointer to the
 ** to the sqlite3_version[] string constant.  The sqlite3_libversion()
 ** function is provided for use in DLLs since DLL users usually do not have
 ** direct access to string constants within the DLL.  ^The
 ** sqlite3_libversion_number() function returns an integer equal to
 ** [SQLITE_VERSION_NUMBER].  ^The sqlite3_sourceid() function returns 
 ** a pointer to a string constant whose value is the same as the 
 ** [SQLITE_SOURCE_ID] C preprocessor macro.
 **
 ** See also: [sqlite_version()] and [sqlite_source_id()].
 */
 SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
 
 /*
 ** CAPI3REF: Run-Time Library Compilation Options Diagnostics
 **
 ** ^The sqlite3_compileoption_used() function returns 0 or 1 
 ** indicating whether the specified option was defined at 
 ** compile time.  ^The SQLITE_ prefix may be omitted from the 
 ** option name passed to sqlite3_compileoption_used().  
 **
 ** ^The sqlite3_compileoption_get() function allows iterating
 ** over the list of options that were defined at compile time by
 ** returning the N-th compile time option string.  ^If N is out of range,
 ** sqlite3_compileoption_get() returns a NULL pointer.  ^The SQLITE_ 
 ** prefix is omitted from any strings returned by 
 ** sqlite3_compileoption_get().
 **
 ** ^Support for the diagnostic functions sqlite3_compileoption_used()
 ** and sqlite3_compileoption_get() may be omitted by specifying the 
 ** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
 **
 ** See also: SQL functions [sqlite_compileoption_used()] and
 ** [sqlite_compileoption_get()] and the [compile_options pragma].
 */
 #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *sqlite3_compileoption_get(int N);
 #endif
 
 /*
 ** CAPI3REF: Test To See If The Library Is Threadsafe
 **
 ** ^The sqlite3_threadsafe() function returns zero if and only if
 ** SQLite was compiled with mutexing code omitted due to the
 ** [SQLITE_THREADSAFE] compile-time option being set to 0.
 **
 ** SQLite can be compiled with or without mutexes.  When
@@ skipping 18 matching lines @@
 ** can be fully or partially disabled using a call to [sqlite3_config()]
 ** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
 ** or [SQLITE_CONFIG_SERIALIZED].  ^(The return value of the
 ** sqlite3_threadsafe() function shows only the compile-time setting of
 ** thread safety, not any run-time changes to that setting made by
 ** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()
 ** is unchanged by calls to sqlite3_config().)^
 **
 ** See the [threading mode] documentation for additional information.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);
+SQLITE_API int sqlite3_threadsafe(void);
 
 /*
 ** CAPI3REF: Database Connection Handle
 ** KEYWORDS: {database connection} {database connections}
 **
 ** Each open SQLite database is represented by a pointer to an instance of
 ** the opaque structure named "sqlite3".  It is useful to think of an sqlite3
 ** pointer as an object.  The [sqlite3_open()], [sqlite3_open16()], and
 ** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
 ** and [sqlite3_close_v2()] are its destructors.  There are many other
@@ skipping 15 matching lines @@
 ** The sqlite_int64 and sqlite_uint64 types are supported for backwards
 ** compatibility only.
 **
 ** ^The sqlite3_int64 and sqlite_int64 types can store integer values
 ** between -9223372036854775808 and +9223372036854775807 inclusive.  ^The
 ** sqlite3_uint64 and sqlite_uint64 types can store integer values 
 ** between 0 and +18446744073709551615 inclusive.
 */
 #ifdef SQLITE_INT64_TYPE
   typedef SQLITE_INT64_TYPE sqlite_int64;
-  typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# ifdef SQLITE_UINT64_TYPE
+    typedef SQLITE_UINT64_TYPE sqlite_uint64;
+# else  
+    typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# endif
 #elif defined(_MSC_VER) || defined(__BORLANDC__)
   typedef __int64 sqlite_int64;
   typedef unsigned __int64 sqlite_uint64;
 #else
   typedef long long int sqlite_int64;
   typedef unsigned long long int sqlite_uint64;
 #endif
 typedef sqlite_int64 sqlite3_int64;
 typedef sqlite_uint64 sqlite3_uint64;
 
@@ skipping 40 matching lines @@
 ** the transaction is automatically rolled back.
 **
 ** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)]
 ** must be either a NULL
 ** pointer or an [sqlite3] object pointer obtained
 ** from [sqlite3_open()], [sqlite3_open16()], or
 ** [sqlite3_open_v2()], and not previously closed.
 ** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
 ** argument is a harmless no-op.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
 
 /*
 ** The type for a callback function.
 ** This is legacy and deprecated.  It is included for historical
 ** compatibility and is not documented.
 */
 typedef int (*sqlite3_callback)(void*,int,char**, char**);
 
 /*
 ** CAPI3REF: One-Step Query Execution Interface
@@ skipping 15 matching lines @@
 ** is NULL, then no callback is ever invoked and result rows are
 ** ignored.
 **
 ** ^If an error occurs while evaluating the SQL statements passed into
 ** sqlite3_exec(), then execution of the current statement stops and
 ** subsequent statements are skipped.  ^If the 5th parameter to sqlite3_exec()
 ** is not NULL then any error message is written into memory obtained
 ** from [sqlite3_malloc()] and passed back through the 5th parameter.
 ** To avoid memory leaks, the application should invoke [sqlite3_free()]
 ** on error message strings returned through the 5th parameter of
-** of sqlite3_exec() after the error message string is no longer needed.
+** sqlite3_exec() after the error message string is no longer needed.
 ** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
 ** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
 ** NULL before returning.
 **
 ** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec()
 ** routine returns SQLITE_ABORT without invoking the callback again and
 ** without running any subsequent SQL statements.
 **
 ** ^The 2nd argument to the sqlite3_exec() callback function is the
 ** number of columns in the result.  ^The 3rd argument to the sqlite3_exec()
@@ skipping 14 matching lines @@
 **
 ** <ul>
 ** <li> The application must ensure that the 1st parameter to sqlite3_exec()
 **      is a valid and open [database connection].
 ** <li> The application must not close the [database connection] specified by
 **      the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
 ** <li> The application must not modify the SQL statement text passed into
 **      the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
 ** </ul>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
   sqlite3*,                                  /* An open database */
   const char *sql,                           /* SQL to be evaluated */
   int (*callback)(void*,int,char**,char**),  /* Callback function */
   void *,                                    /* 1st argument to callback */
   char **errmsg                              /* Error msg written here */
 );
 
 /*
 ** CAPI3REF: Result Codes
 ** KEYWORDS: {result code definitions}
@@ skipping 40 matching lines @@
 /* end-of-error-codes */
 
 /*
 ** CAPI3REF: Extended Result Codes
 ** KEYWORDS: {extended result code definitions}
 **
 ** In its default configuration, SQLite API routines return one of 30 integer
 ** [result codes].  However, experience has shown that many of
 ** these result codes are too coarse-grained.  They do not provide as
 ** much information about problems as programmers might like.  In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
+** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8]
+** and later) include
 ** support for additional result codes that provide more detailed information
 ** about errors. These [extended result codes] are enabled or disabled
 ** on a per database connection basis using the
 ** [sqlite3_extended_result_codes()] API.  Or, the extended code for
 ** the most recent error can be obtained using
 ** [sqlite3_extended_errcode()].
 */
 #define SQLITE_IOERR_READ              (SQLITE_IOERR | (1<<8))
 #define SQLITE_IOERR_SHORT_READ        (SQLITE_IOERR | (2<<8))
 #define SQLITE_IOERR_WRITE             (SQLITE_IOERR | (3<<8))
@@ skipping 42 matching lines @@
 #define SQLITE_CONSTRAINT_NOTNULL      (SQLITE_CONSTRAINT | (5<<8))
 #define SQLITE_CONSTRAINT_PRIMARYKEY   (SQLITE_CONSTRAINT | (6<<8))
 #define SQLITE_CONSTRAINT_TRIGGER      (SQLITE_CONSTRAINT | (7<<8))
 #define SQLITE_CONSTRAINT_UNIQUE       (SQLITE_CONSTRAINT | (8<<8))
 #define SQLITE_CONSTRAINT_VTAB         (SQLITE_CONSTRAINT | (9<<8))
 #define SQLITE_CONSTRAINT_ROWID        (SQLITE_CONSTRAINT |(10<<8))
 #define SQLITE_NOTICE_RECOVER_WAL      (SQLITE_NOTICE | (1<<8))
 #define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
 #define SQLITE_WARNING_AUTOINDEX       (SQLITE_WARNING | (1<<8))
 #define SQLITE_AUTH_USER               (SQLITE_AUTH | (1<<8))
+#define SQLITE_OK_LOAD_PERMANENTLY     (SQLITE_OK | (1<<8))
 
 /*
 ** CAPI3REF: Flags For File Open Operations
 **
 ** These bit values are intended for use in the
 ** 3rd parameter to the [sqlite3_open_v2()] interface and
 ** in the 4th parameter to the [sqlite3_vfs.xOpen] method.
 */
 #define SQLITE_OPEN_READONLY         0x00000001  /* Ok for sqlite3_open_v2() */
 #define SQLITE_OPEN_READWRITE        0x00000002  /* Ok for sqlite3_open_v2() */
@@ skipping 34 matching lines @@
 ** nnn are atomic.  The SQLITE_IOCAP_SAFE_APPEND value means
 ** that when data is appended to a file, the data is appended
 ** first then the size of the file is extended, never the other
 ** way around.  The SQLITE_IOCAP_SEQUENTIAL property means that
 ** information is written to disk in the same order as calls
 ** to xWrite().  The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that
 ** after reboot following a crash or power loss, the only bytes in a
 ** file that were written at the application level might have changed
 ** and that adjacent bytes, even bytes within the same sector are
 ** guaranteed to be unchanged.  The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
-** flag indicate that a file cannot be deleted when open.  The
+** flag indicates that a file cannot be deleted when open.  The
 ** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
 ** read-only media and cannot be changed even by processes with
 ** elevated privileges.
 */
 #define SQLITE_IOCAP_ATOMIC                 0x00000001
 #define SQLITE_IOCAP_ATOMIC512              0x00000002
 #define SQLITE_IOCAP_ATOMIC1K               0x00000004
 #define SQLITE_IOCAP_ATOMIC2K               0x00000008
 #define SQLITE_IOCAP_ATOMIC4K               0x00000010
 #define SQLITE_IOCAP_ATOMIC8K               0x00000020
@@ skipping 129 matching lines @@
 ** <li> [SQLITE_IOCAP_ATOMIC512]
 ** <li> [SQLITE_IOCAP_ATOMIC1K]
 ** <li> [SQLITE_IOCAP_ATOMIC2K]
 ** <li> [SQLITE_IOCAP_ATOMIC4K]
 ** <li> [SQLITE_IOCAP_ATOMIC8K]
 ** <li> [SQLITE_IOCAP_ATOMIC16K]
 ** <li> [SQLITE_IOCAP_ATOMIC32K]
 ** <li> [SQLITE_IOCAP_ATOMIC64K]
 ** <li> [SQLITE_IOCAP_SAFE_APPEND]
 ** <li> [SQLITE_IOCAP_SEQUENTIAL]
+** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
+** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
+** <li> [SQLITE_IOCAP_IMMUTABLE]
 ** </ul>
 **
 ** The SQLITE_IOCAP_ATOMIC property means that all writes of
 ** any size are atomic.  The SQLITE_IOCAP_ATOMICnnn values
 ** mean that writes of blocks that are nnn bytes in size and
 ** are aligned to an address which is an integer multiple of
 ** nnn are atomic.  The SQLITE_IOCAP_SAFE_APPEND value means
 ** that when data is appended to a file, the data is appended
 ** first then the size of the file is extended, never the other
 ** way around.  The SQLITE_IOCAP_SEQUENTIAL property means that
@@ skipping 236 matching lines @@
 ** The argument is a zero-terminated string.  Higher layers in the
 ** SQLite stack may generate instances of this file control if
 ** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled.
 **
 ** <li>[[SQLITE_FCNTL_HAS_MOVED]]
 ** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a
 ** pointer to an integer and it writes a boolean into that integer depending
 ** on whether or not the file has been renamed, moved, or deleted since it
 ** was first opened.
 **
+** <li>[[SQLITE_FCNTL_WIN32_GET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_GET_HANDLE] opcode can be used to obtain the
+** underlying native file handle associated with a file handle.  This file
+** control interprets its argument as a pointer to a native file handle and
+** writes the resulting value there.
+**
 ** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
 ** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging.  This
 ** opcode causes the xFileControl method to swap the file handle with the one
 ** pointed to by the pArg argument.  This capability is used during testing
 ** and only needs to be supported when SQLITE_TEST is defined.
 **
 ** <li>[[SQLITE_FCNTL_WAL_BLOCK]]
 ** The [SQLITE_FCNTL_WAL_BLOCK] is a signal to the VFS layer that it might
 ** be advantageous to block on the next WAL lock if the lock is not immediately
 ** available.  The WAL subsystem issues this signal during rare
@@ skipping 30 matching lines @@
 #define SQLITE_FCNTL_TRACE                  19
 #define SQLITE_FCNTL_HAS_MOVED              20
 #define SQLITE_FCNTL_SYNC                   21
 #define SQLITE_FCNTL_COMMIT_PHASETWO        22
 #define SQLITE_FCNTL_WIN32_SET_HANDLE       23
 #define SQLITE_FCNTL_WAL_BLOCK              24
 #define SQLITE_FCNTL_ZIPVFS                 25
 #define SQLITE_FCNTL_RBU                    26
 #define SQLITE_FCNTL_VFS_POINTER            27
 #define SQLITE_FCNTL_JOURNAL_POINTER        28
+#define SQLITE_FCNTL_WIN32_GET_HANDLE       29
+#define SQLITE_FCNTL_PDB                    30
 
 /* deprecated names */
 #define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
 #define SQLITE_SET_LOCKPROXYFILE      SQLITE_FCNTL_SET_LOCKPROXYFILE
 #define SQLITE_LAST_ERRNO             SQLITE_FCNTL_LAST_ERRNO
 
 
 /*
 ** CAPI3REF: Mutex Handle
 **
 ** The mutex module within SQLite defines [sqlite3_mutex] to be an
 ** abstract type for a mutex object.  The SQLite core never looks
 ** at the internal representation of an [sqlite3_mutex].  It only
 ** deals with pointers to the [sqlite3_mutex] object.
 **
 ** Mutexes are created using [sqlite3_mutex_alloc()].
 */
 typedef struct sqlite3_mutex sqlite3_mutex;
 
 /*
+** CAPI3REF: Loadable Extension Thunk
+**
+** A pointer to the opaque sqlite3_api_routines structure is passed as
+** the third parameter to entry points of [loadable extensions].  This
+** structure must be typedefed in order to work around compiler warnings
+** on some platforms.
+*/
+typedef struct sqlite3_api_routines sqlite3_api_routines;
+
+/*
 ** CAPI3REF: OS Interface Object
 **
 ** An instance of the sqlite3_vfs object defines the interface between
 ** the SQLite core and the underlying operating system.  The "vfs"
 ** in the name of the object stands for "virtual file system".  See
 ** the [VFS | VFS documentation] for further information.
 **
 ** The value of the iVersion field is initially 1 but may be larger in
 ** future versions of SQLite.  Additional fields may be appended to this
 ** object when the iVersion value is increased.  Note that the structure
@@ skipping 172 matching lines @@
   int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
   /*
   ** The methods above are in versions 1 and 2 of the sqlite_vfs object.
   ** Those below are for version 3 and greater.
   */
   int (*xSetSystemCall)(sqlite3_vfs*, const char *zName, sqlite3_syscall_ptr);
   sqlite3_syscall_ptr (*xGetSystemCall)(sqlite3_vfs*, const char *zName);
   const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
   /*
   ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
-  ** New fields may be appended in figure versions.  The iVersion
+  ** New fields may be appended in future versions.  The iVersion
   ** value will increment whenever this happens. 
   */
 };
 
 /*
 ** CAPI3REF: Flags for the xAccess VFS method
 **
 ** These integer constants can be used as the third parameter to
 ** the xAccess method of an [sqlite3_vfs] object.  They determine
 ** what kind of permissions the xAccess method is looking for.
@@ skipping 121 matching lines @@
 ** implementations for sqlite3_os_init() and sqlite3_os_end()
 ** are built into SQLite when it is compiled for Unix, Windows, or OS/2.
 ** When [custom builds | built for other platforms]
 ** (using the [SQLITE_OS_OTHER=1] compile-time
 ** option) the application must supply a suitable implementation for
 ** sqlite3_os_init() and sqlite3_os_end().  An application-supplied
 ** implementation of sqlite3_os_init() or sqlite3_os_end()
 ** must return [SQLITE_OK] on success and some other [error code] upon
 ** failure.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
 
 /*
 ** CAPI3REF: Configuring The SQLite Library
 **
 ** The sqlite3_config() interface is used to make global configuration
 ** changes to SQLite in order to tune SQLite to the specific needs of
 ** the application.  The default configuration is recommended for most
 ** applications and so this routine is usually not necessary.  It is
 ** provided to support rare applications with unusual needs.
 **
@@ skipping 12 matching lines @@
 ** The first argument to sqlite3_config() is an integer
 ** [configuration option] that determines
 ** what property of SQLite is to be configured.  Subsequent arguments
 ** vary depending on the [configuration option]
 ** in the first argument.
 **
 ** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
 ** ^If the option is unknown or SQLite is unable to set the option
 ** then this routine returns a non-zero [error code].
 */
-SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
+SQLITE_API int sqlite3_config(int, ...);
 
 /*
 ** CAPI3REF: Configure database connections
 ** METHOD: sqlite3
 **
 ** The sqlite3_db_config() interface is used to make configuration
 ** changes to a [database connection].  The interface is similar to
 ** [sqlite3_config()] except that the changes apply to a single
 ** [database connection] (specified in the first argument).
 **
 ** The second argument to sqlite3_db_config(D,V,...)  is the
 ** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code 
 ** that indicates what aspect of the [database connection] is being configured.
 ** Subsequent arguments vary depending on the configuration verb.
 **
 ** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
 ** the call is considered successful.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Memory Allocation Routines
 **
 ** An instance of this object defines the interface between SQLite
 ** and low-level memory allocation routines.
 **
 ** This object is used in only one place in the SQLite interface.
 ** A pointer to an instance of this object is the argument to
 ** [sqlite3_config()] when the configuration option is
@@ skipping 374 matching lines @@
 ** [[SQLITE_CONFIG_PMASZ]]
 ** <dt>SQLITE_CONFIG_PMASZ
 ** <dd>^The SQLITE_CONFIG_PMASZ option takes a single parameter which
 ** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded
 ** sorter to that integer.  The default minimum PMA Size is set by the
 ** [SQLITE_SORTER_PMASZ] compile-time option.  New threads are launched
 ** to help with sort operations when multithreaded sorting
 ** is enabled (using the [PRAGMA threads] command) and the amount of content
 ** to be sorted exceeds the page size times the minimum of the
 ** [PRAGMA cache_size] setting and this value.
+**
+** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
+** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
+** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
+** becomes the [statement journal] spill-to-disk threshold.  
+** [Statement journals] are held in memory until their size (in bytes)
+** exceeds this threshold, at which point they are written to disk.
+** Or if the threshold is -1, statement journals are always held
+** exclusively in memory.
+** Since many statement journals never become large, setting the spill
+** threshold to a value such as 64KiB can greatly reduce the amount of
+** I/O required to support statement rollback.
+** The default value for this setting is controlled by the
+** [SQLITE_STMTJRNL_SPILL] compile-time option.
 ** </dl>
 */
 #define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
 #define SQLITE_CONFIG_MULTITHREAD   2  /* nil */
 #define SQLITE_CONFIG_SERIALIZED    3  /* nil */
 #define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
 #define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
 #define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
 #define SQLITE_CONFIG_PAGECACHE     7  /* void*, int sz, int N */
 #define SQLITE_CONFIG_HEAP          8  /* void*, int nByte, int min */
 #define SQLITE_CONFIG_MEMSTATUS     9  /* boolean */
 #define SQLITE_CONFIG_MUTEX        10  /* sqlite3_mutex_methods* */
 #define SQLITE_CONFIG_GETMUTEX     11  /* sqlite3_mutex_methods* */
 /* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */ 
 #define SQLITE_CONFIG_LOOKASIDE    13  /* int int */
 #define SQLITE_CONFIG_PCACHE       14  /* no-op */
 #define SQLITE_CONFIG_GETPCACHE    15  /* no-op */
 #define SQLITE_CONFIG_LOG          16  /* xFunc, void* */
 #define SQLITE_CONFIG_URI          17  /* int */
 #define SQLITE_CONFIG_PCACHE2      18  /* sqlite3_pcache_methods2* */
 #define SQLITE_CONFIG_GETPCACHE2   19  /* sqlite3_pcache_methods2* */
 #define SQLITE_CONFIG_COVERING_INDEX_SCAN 20  /* int */
 #define SQLITE_CONFIG_SQLLOG       21  /* xSqllog, void* */
 #define SQLITE_CONFIG_MMAP_SIZE    22  /* sqlite3_int64, sqlite3_int64 */
 #define SQLITE_CONFIG_WIN32_HEAPSIZE      23  /* int nByte */
 #define SQLITE_CONFIG_PCACHE_HDRSZ        24  /* int *psz */
 #define SQLITE_CONFIG_PMASZ               25  /* unsigned int szPma */
+#define SQLITE_CONFIG_STMTJRNL_SPILL      26  /* int nByte */
 
 /*
 ** CAPI3REF: Database Connection Configuration Options
 **
 ** These constants are the available integer configuration options that
 ** can be passed as the second argument to the [sqlite3_db_config()] interface.
 **
 ** New configuration options may be added in future releases of SQLite.
 ** Existing configuration options might be discontinued.  Applications
 ** should check the return code from [sqlite3_db_config()] to make sure that
@@ skipping 37 matching lines @@
 ** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt>
 ** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers].
 ** There should be two additional arguments.
 ** The first argument is an integer which is 0 to disable triggers,
 ** positive to enable triggers or negative to leave the setting unchanged.
 ** The second parameter is a pointer to an integer into which
 ** is written 0 or 1 to indicate whether triggers are disabled or enabled
 ** following this call.  The second parameter may be a NULL pointer, in
 ** which case the trigger setting is not reported back. </dd>
 **
+** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
+** <dd> ^This option is used to enable or disable the two-argument
+** version of the [fts3_tokenizer()] function which is part of the
+** [FTS3] full-text search engine extension.
+** There should be two additional arguments.
+** The first argument is an integer which is 0 to disable fts3_tokenizer() or
+** positive to enable fts3_tokenizer() or negative to leave the setting
+** unchanged.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
+** following this call.  The second parameter may be a NULL pointer, in
+** which case the new setting is not reported back. </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
+** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
+** interface independently of the [load_extension()] SQL function.
+** The [sqlite3_enable_load_extension()] API enables or disables both the
+** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
+** There should be two additional arguments.
+** When the first argument to this interface is 1, then only the C-API is
+** enabled and the SQL function remains disabled.  If the first argument to
+** this interface is 0, then both the C-API and the SQL function are disabled.
+** If the first argument is -1, then no changes are made to state of either the
+** C-API or the SQL function.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
+** is disabled or enabled following this call.  The second parameter may
+** be a NULL pointer, in which case the new setting is not reported back.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** <dd> ^This option is used to change the name of the "main" database
+** schema.  ^The sole argument is a pointer to a constant UTF8 string
+** which will become the new schema name in place of "main".  ^SQLite
+** does not make a copy of the new main schema name string, so the application
+** must ensure that the argument passed into this DBCONFIG option is unchanged
+** until after the database connection closes.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt>
+** <dd> Usually, when a database in wal mode is closed or detached from a 
+** database handle, SQLite checks if this will mean that there are now no 
+** connections at all to the database. If so, it performs a checkpoint 
+** operation before closing the connection. This option may be used to
+** override this behaviour. The first parameter passed to this operation
+** is an integer - non-zero to disable checkpoints-on-close, or zero (the
+** default) to enable them. The second parameter is a pointer to an integer
+** into which is written 0 or 1 to indicate whether checkpoints-on-close
+** have been disabled - 0 if they are not disabled, 1 if they are.
+** </dd>
+**
 ** </dl>
 */
-#define SQLITE_DBCONFIG_LOOKASIDE       1001  /* void* int int */
-#define SQLITE_DBCONFIG_ENABLE_FKEY     1002  /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_TRIGGER  1003  /* int int* */
+#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
+#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
+#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
+#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
 
 
 /*
 ** CAPI3REF: Enable Or Disable Extended Result Codes
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_extended_result_codes() routine enables or disables the
 ** [extended result codes] feature of SQLite. ^The extended result
 ** codes are disabled by default for historical compatibility.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
 
 /*
 ** CAPI3REF: Last Insert Rowid
 ** METHOD: sqlite3
 **
 ** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables)
 ** has a unique 64-bit signed
 ** integer key called the [ROWID | "rowid"]. ^The rowid is always available
 ** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
 ** names are not also used by explicitly declared columns. ^If
@@ skipping 31 matching lines @@
 ** This function is accessible to SQL statements via the
 ** [last_insert_rowid() SQL function].
 **
 ** If a separate thread performs a new [INSERT] on the same
 ** database connection while the [sqlite3_last_insert_rowid()]
 ** function is running and thus changes the last insert [rowid],
 ** then the value returned by [sqlite3_last_insert_rowid()] is
 ** unpredictable and might not equal either the old or the new
 ** last insert [rowid].
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
 
 /*
 ** CAPI3REF: Count The Number Of Rows Modified
 ** METHOD: sqlite3
 **
 ** ^This function returns the number of rows modified, inserted or
 ** deleted by the most recently completed INSERT, UPDATE or DELETE
 ** statement on the database connection specified by the only parameter.
 ** ^Executing any other type of SQL statement does not modify the value
 ** returned by this function.
@@ skipping 32 matching lines @@
 ** program, the value returned reflects the number of rows modified by the 
 ** previous INSERT, UPDATE or DELETE statement within the same trigger.
 **
 ** See also the [sqlite3_total_changes()] interface, the
 ** [count_changes pragma], and the [changes() SQL function].
 **
 ** If a separate thread makes changes on the same database connection
 ** while [sqlite3_changes()] is running then the value returned
 ** is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
+SQLITE_API int sqlite3_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Total Number Of Rows Modified
 ** METHOD: sqlite3
 **
 ** ^This function returns the total number of rows inserted, modified or
 ** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed
 ** since the database connection was opened, including those executed as
 ** part of trigger programs. ^Executing any other type of SQL statement
 ** does not affect the value returned by sqlite3_total_changes().
 ** 
 ** ^Changes made as part of [foreign key actions] are included in the
 ** count, but those made as part of REPLACE constraint resolution are
 ** not. ^Changes to a view that are intercepted by INSTEAD OF triggers 
 ** are not counted.
 ** 
 ** See also the [sqlite3_changes()] interface, the
 ** [count_changes pragma], and the [total_changes() SQL function].
 **
 ** If a separate thread makes changes on the same database connection
 ** while [sqlite3_total_changes()] is running then the value
 ** returned is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
+SQLITE_API int sqlite3_total_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Interrupt A Long-Running Query
 ** METHOD: sqlite3
 **
 ** ^This function causes any pending database operation to abort and
 ** return at its earliest opportunity. This routine is typically
 ** called in response to a user action such as pressing "Cancel"
 ** or Ctrl-C where the user wants a long query operation to halt
 ** immediately.
@@ skipping 19 matching lines @@
 ** running prior to the sqlite3_interrupt() call.  ^New SQL statements
 ** that are started after the running statement count reaches zero are
 ** not effected by the sqlite3_interrupt().
 ** ^A call to sqlite3_interrupt(D) that occurs when there are no running
 ** SQL statements is a no-op and has no effect on SQL statements
 ** that are started after the sqlite3_interrupt() call returns.
 **
 ** If the database connection closes while [sqlite3_interrupt()]
 ** is running then bad things will likely happen.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
+SQLITE_API void sqlite3_interrupt(sqlite3*);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Is Complete
 **
 ** These routines are useful during command-line input to determine if the
 ** currently entered text seems to form a complete SQL statement or
 ** if additional input is needed before sending the text into
 ** SQLite for parsing.  ^These routines return 1 if the input string
 ** appears to be a complete SQL statement.  ^A statement is judged to be
 ** complete if it ends with a semicolon token and is not a prefix of a
@@ skipping 14 matching lines @@
 ** automatically by sqlite3_complete16().  If that initialization fails,
 ** then the return value from sqlite3_complete16() will be non-zero
 ** regardless of whether or not the input SQL is complete.)^
 **
 ** The input to [sqlite3_complete()] must be a zero-terminated
 ** UTF-8 string.
 **
 ** The input to [sqlite3_complete16()] must be a zero-terminated
 ** UTF-16 string in native byte order.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
 
 /*
 ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
 ** KEYWORDS: {busy-handler callback} {busy handler}
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
 ** that might be invoked with argument P whenever
 ** an attempt is made to access a database table associated with
 ** [database connection] D when another thread
@@ skipping 40 matching lines @@
 ** busy handler and thus clear any previously set busy handler.
 **
 ** The busy callback should not take any actions which modify the
 ** database connection that invoked the busy handler.  In other words,
 ** the busy handler is not reentrant.  Any such actions
 ** result in undefined behavior.
 ** 
 ** A busy handler must not close the database connection
 ** or [prepared statement] that invoked the busy handler.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
+SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
 
 /*
 ** CAPI3REF: Set A Busy Timeout
 ** METHOD: sqlite3
 **
 ** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
 ** for a specified amount of time when a table is locked.  ^The handler
 ** will sleep multiple times until at least "ms" milliseconds of sleeping
 ** have accumulated.  ^After at least "ms" milliseconds of sleeping,
 ** the handler returns 0 which causes [sqlite3_step()] to return
 ** [SQLITE_BUSY].
 **
 ** ^Calling this routine with an argument less than or equal to zero
 ** turns off all busy handlers.
 **
 ** ^(There can only be a single busy handler for a particular
 ** [database connection] at any given moment.  If another busy handler
 ** was defined  (using [sqlite3_busy_handler()]) prior to calling
 ** this routine, that other busy handler is cleared.)^
 **
 ** See also:  [PRAGMA busy_timeout]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
+SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
 /*
 ** CAPI3REF: Convenience Routines For Running Queries
 ** METHOD: sqlite3
 **
 ** This is a legacy interface that is preserved for backwards compatibility.
 ** Use of this interface is not recommended.
 **
 ** Definition: A <b>result table</b> is memory data structure created by the
 ** [sqlite3_get_table()] interface.  A result table records the
@@ skipping 54 matching lines @@
 ** [sqlite3_free_table()] is able to release the memory properly and safely.
 **
 ** The sqlite3_get_table() interface is implemented as a wrapper around
 ** [sqlite3_exec()].  The sqlite3_get_table() routine does not have access
 ** to any internal data structures of SQLite.  It uses only the public
 ** interface defined here.  As a consequence, errors that occur in the
 ** wrapper layer outside of the internal [sqlite3_exec()] call are not
 ** reflected in subsequent calls to [sqlite3_errcode()] or
 ** [sqlite3_errmsg()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
   sqlite3 *db,          /* An open database */
   const char *zSql,     /* SQL to be evaluated */
   char ***pazResult,    /* Results of the query */
   int *pnRow,           /* Number of result rows written here */
   int *pnColumn,        /* Number of result columns written here */
   char **pzErrmsg       /* Error msg written here */
 );
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
+SQLITE_API void sqlite3_free_table(char **result);
 
 /*
 ** CAPI3REF: Formatted String Printing Functions
 **
 ** These routines are work-alikes of the "printf()" family of functions
 ** from the standard C library.
 ** These routines understand most of the common K&R formatting options,
 ** plus some additional non-standard formats, detailed below.
 ** Note that some of the more obscure formatting options from recent
 ** C-library standards are omitted from this implementation.
@@ skipping 85 matching lines @@
 ** ^(The "%w" formatting option is like "%q" except that it expects to
 ** be contained within double-quotes instead of single quotes, and it
 ** escapes the double-quote character instead of the single-quote
 ** character.)^  The "%w" formatting option is intended for safely inserting
 ** table and column names into a constructed SQL statement.
 **
 ** ^(The "%z" formatting option works like "%s" but with the
 ** addition that after the string has been read and copied into
 ** the result, [sqlite3_free()] is called on the input string.)^
 */
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);
+SQLITE_API char *sqlite3_mprintf(const char*,...);
+SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
+SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
 
 /*
 ** CAPI3REF: Memory Allocation Subsystem
 **
 ** The SQLite core uses these three routines for all of its own
 ** internal memory allocation needs. "Core" in the previous sentence
 ** does not include operating-system specific VFS implementation.  The
 ** Windows VFS uses native malloc() and free() for some operations.
 **
 ** ^The sqlite3_malloc() routine returns a pointer to a block
@@ skipping 69 matching lines @@
 **
 ** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
 ** must be either NULL or else pointers obtained from a prior
 ** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
 ** not yet been released.
 **
 ** The application must not read or write any part of
 ** a block of memory after it has been released using
 ** [sqlite3_free()] or [sqlite3_realloc()].
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
+SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
+SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
+SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
 
 /*
 ** CAPI3REF: Memory Allocator Statistics
 **
 ** SQLite provides these two interfaces for reporting on the status
 ** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
 ** routines, which form the built-in memory allocation subsystem.
 **
 ** ^The [sqlite3_memory_used()] routine returns the number of bytes
 ** of memory currently outstanding (malloced but not freed).
 ** ^The [sqlite3_memory_highwater()] routine returns the maximum
 ** value of [sqlite3_memory_used()] since the high-water mark
 ** was last reset.  ^The values returned by [sqlite3_memory_used()] and
 ** [sqlite3_memory_highwater()] include any overhead
 ** added by SQLite in its implementation of [sqlite3_malloc()],
 ** but not overhead added by the any underlying system library
 ** routines that [sqlite3_malloc()] may call.
 **
 ** ^The memory high-water mark is reset to the current value of
 ** [sqlite3_memory_used()] if and only if the parameter to
 ** [sqlite3_memory_highwater()] is true.  ^The value returned
 ** by [sqlite3_memory_highwater(1)] is the high-water mark
 ** prior to the reset.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
 
 /*
 ** CAPI3REF: Pseudo-Random Number Generator
 **
 ** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
 ** select random [ROWID | ROWIDs] when inserting new records into a table that
 ** already uses the largest possible [ROWID].  The PRNG is also used for
 ** the build-in random() and randomblob() SQL functions.  This interface allows
 ** applications to access the same PRNG for other purposes.
 **
 ** ^A call to this routine stores N bytes of randomness into buffer P.
 ** ^The P parameter can be a NULL pointer.
 **
 ** ^If this routine has not been previously called or if the previous
 ** call had N less than one or a NULL pointer for P, then the PRNG is
 ** seeded using randomness obtained from the xRandomness method of
 ** the default [sqlite3_vfs] object.
 ** ^If the previous call to this routine had an N of 1 or more and a
 ** non-NULL P then the pseudo-randomness is generated
 ** internally and without recourse to the [sqlite3_vfs] xRandomness
 ** method.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
+SQLITE_API void sqlite3_randomness(int N, void *P);
 
 /*
 ** CAPI3REF: Compile-Time Authorization Callbacks
 ** METHOD: sqlite3
 **
 ** ^This routine registers an authorizer callback with a particular
 ** [database connection], supplied in the first argument.
 ** ^The authorizer callback is invoked as SQL statements are being compiled
 ** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
 ** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()].  ^At various
@@ skipping 62 matching lines @@
 ** statement might be re-prepared during [sqlite3_step()] due to a 
 ** schema change.  Hence, the application should ensure that the
 ** correct authorizer callback remains in place during the [sqlite3_step()].
 **
 ** ^Note that the authorizer callback is invoked only during
 ** [sqlite3_prepare()] or its variants.  Authorization is not
 ** performed during statement evaluation in [sqlite3_step()], unless
 ** as stated in the previous paragraph, sqlite3_step() invokes
 ** sqlite3_prepare_v2() to reprepare a statement after a schema change.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
   sqlite3*,
   int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
   void *pUserData
 );
 
 /*
 ** CAPI3REF: Authorizer Return Codes
 **
 ** The [sqlite3_set_authorizer | authorizer callback function] must
 ** return either [SQLITE_OK] or one of these two constants in order
@@ skipping 59 matching lines @@
 #define SQLITE_DROP_VTABLE          30   /* Table Name      Module Name     */
 #define SQLITE_FUNCTION             31   /* NULL            Function Name   */
 #define SQLITE_SAVEPOINT            32   /* Operation       Savepoint Name  */
 #define SQLITE_COPY                  0   /* No longer used */
 #define SQLITE_RECURSIVE            33   /* NULL            NULL            */
 
 /*
 ** CAPI3REF: Tracing And Profiling Functions
 ** METHOD: sqlite3
 **
+** These routines are deprecated. Use the [sqlite3_trace_v2()] interface
+** instead of the routines described here.
+**
 ** These routines register callback functions that can be used for
 ** tracing and profiling the execution of SQL statements.
 **
 ** ^The callback function registered by sqlite3_trace() is invoked at
 ** various times when an SQL statement is being run by [sqlite3_step()].
 ** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the
 ** SQL statement text as the statement first begins executing.
 ** ^(Additional sqlite3_trace() callbacks might occur
 ** as each triggered subprogram is entered.  The callbacks for triggers
 ** contain a UTF-8 SQL comment that identifies the trigger.)^
 **
 ** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit
 ** the length of [bound parameter] expansion in the output of sqlite3_trace().
 **
 ** ^The callback function registered by sqlite3_profile() is invoked
 ** as each SQL statement finishes.  ^The profile callback contains
 ** the original statement text and an estimate of wall-clock time
 ** of how long that statement took to run.  ^The profile callback
 ** time is in units of nanoseconds, however the current implementation
 ** is only capable of millisecond resolution so the six least significant
 ** digits in the time are meaningless.  Future versions of SQLite
 ** might provide greater resolution on the profiler callback.  The
 ** sqlite3_profile() function is considered experimental and is
 ** subject to change in future versions of SQLite.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_trace(sqlite3*,
+   void(*xTrace)(void*,const char*), void*);
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
    void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
 
 /*
+** CAPI3REF: SQL Trace Event Codes
+** KEYWORDS: SQLITE_TRACE
+**
+** These constants identify classes of events that can be monitored
+** using the [sqlite3_trace_v2()] tracing logic.  The third argument
+** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of
+** the following constants.  ^The first argument to the trace callback
+** is one of the following constants.
+**
+** New tracing constants may be added in future releases.
+**
+** ^A trace callback has four arguments: xCallback(T,C,P,X).
+** ^The T argument is one of the integer type codes above.
+** ^The C argument is a copy of the context pointer passed in as the
+** fourth argument to [sqlite3_trace_v2()].
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** <dl>
+** [[SQLITE_TRACE_STMT]] <dt>SQLITE_TRACE_STMT</dt>
+** <dd>^An SQLITE_TRACE_STMT callback is invoked when a prepared statement
+** first begins running and possibly at other times during the
+** execution of the prepared statement, such as at the start of each
+** trigger subprogram. ^The P argument is a pointer to the
+** [prepared statement]. ^The X argument is a pointer to a string which
+** is the unexpanded SQL text of the prepared statement or an SQL comment 
+** that indicates the invocation of a trigger.  ^The callback can compute
+** the same text that would have been returned by the legacy [sqlite3_trace()]
+** interface by using the X argument when X begins with "--" and invoking
+** [sqlite3_expanded_sql(P)] otherwise.
+**
+** [[SQLITE_TRACE_PROFILE]] <dt>SQLITE_TRACE_PROFILE</dt>
+** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same
+** information as is provided by the [sqlite3_profile()] callback.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument points to a 64-bit integer which is the estimated of
+** the number of nanosecond that the prepared statement took to run.
+** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes.
+**
+** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
+** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
+** statement generates a single row of result.  
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument is unused.
+**
+** [[SQLITE_TRACE_CLOSE]] <dt>SQLITE_TRACE_CLOSE</dt>
+** <dd>^An SQLITE_TRACE_CLOSE callback is invoked when a database
+** connection closes.
+** ^The P argument is a pointer to the [database connection] object
+** and the X argument is unused.
+** </dl>
+*/
+#define SQLITE_TRACE_STMT       0x01
+#define SQLITE_TRACE_PROFILE    0x02
+#define SQLITE_TRACE_ROW        0x04
+#define SQLITE_TRACE_CLOSE      0x08
+
+/*
+** CAPI3REF: SQL Trace Hook
+** METHOD: sqlite3
+**
+** ^The sqlite3_trace_v2(D,M,X,P) interface registers a trace callback
+** function X against [database connection] D, using property mask M
+** and context pointer P.  ^If the X callback is
+** NULL or if the M mask is zero, then tracing is disabled.  The
+** M argument should be the bitwise OR-ed combination of
+** zero or more [SQLITE_TRACE] constants.
+**
+** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides 
+** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
+**
+** ^The X callback is invoked whenever any of the events identified by 
+** mask M occur.  ^The integer return value from the callback is currently
+** ignored, though this may change in future releases.  Callback
+** implementations should return zero to ensure future compatibility.
+**
+** ^A trace callback is invoked with four arguments: callback(T,C,P,X).
+** ^The T argument is one of the [SQLITE_TRACE]
+** constants to indicate why the callback was invoked.
+** ^The C argument is a copy of the context pointer.
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** The sqlite3_trace_v2() interface is intended to replace the legacy
+** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
+** are deprecated.
+*/
+SQLITE_API int sqlite3_trace_v2(
+  sqlite3*,
+  unsigned uMask,
+  int(*xCallback)(unsigned,void*,void*,void*),
+  void *pCtx
+);
+
+/*
 ** CAPI3REF: Query Progress Callbacks
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
 ** function X to be invoked periodically during long running calls to
 ** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
 ** database connection D.  An example use for this
 ** interface is to keep a GUI updated during a large query.
 **
 ** ^The parameter P is passed through as the only parameter to the 
@@ skipping 11 matching lines @@
 ** ^If the progress callback returns non-zero, the operation is
 ** interrupted.  This feature can be used to implement a
 ** "Cancel" button on a GUI progress dialog box.
 **
 ** The progress handler callback must not do anything that will modify
 ** the database connection that invoked the progress handler.
 ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
 ** database connections for the meaning of "modify" in this paragraph.
 **
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 
 /*
 ** CAPI3REF: Opening A New Database Connection
 ** CONSTRUCTOR: sqlite3
 **
 ** ^These routines open an SQLite database file as specified by the 
 ** filename argument. ^The filename argument is interpreted as UTF-8 for
 ** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
 ** order for sqlite3_open16(). ^(A [database connection] handle is usually
 ** returned in *ppDb, even if an error occurs.  The only exception is that
@@ skipping 208 matching lines @@
 ** codepage is currently defined.  Filenames containing international
 ** characters must be converted to UTF-8 prior to passing them into
 ** sqlite3_open() or sqlite3_open_v2().
 **
 ** <b>Note to Windows Runtime users:</b>  The temporary directory must be set
 ** prior to calling sqlite3_open() or sqlite3_open_v2().  Otherwise, various
 ** features that require the use of temporary files may fail.
 **
 ** See also: [sqlite3_temp_directory]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
   const void *filename,   /* Database filename (UTF-16) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb,         /* OUT: SQLite db handle */
   int flags,              /* Flags */
   const char *zVfs        /* Name of VFS module to use */
 );
 
 /*
 ** CAPI3REF: Obtain Values For URI Parameters
 **
 ** These are utility routines, useful to VFS implementations, that check
@@ skipping 25 matching lines @@
 ** 64-bit signed integer and returns that integer, or D if P does not
 ** exist.  If the value of P is something other than an integer, then
 ** zero is returned.
 ** 
 ** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and
 ** sqlite3_uri_boolean(F,P,B) returns B.  If F is not a NULL pointer and
 ** is not a database file pathname pointer that SQLite passed into the xOpen
 ** VFS method, then the behavior of this routine is undefined and probably
 ** undesirable.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
 
 
 /*
 ** CAPI3REF: Error Codes And Messages
 ** METHOD: sqlite3
 **
 ** ^If the most recent sqlite3_* API call associated with 
 ** [database connection] D failed, then the sqlite3_errcode(D) interface
 ** returns the numeric [result code] or [extended result code] for that
 ** API call.
@@ skipping 23 matching lines @@
 ** interfaces always report the most recent result.  To avoid
 ** this, each thread can obtain exclusive use of the [database connection] D
 ** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning
 ** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after
 ** all calls to the interfaces listed here are completed.
 **
 ** If an interface fails with SQLITE_MISUSE, that means the interface
 ** was invoked incorrectly by the application.  In that case, the
 ** error code and message may or may not be set.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);
+SQLITE_API int sqlite3_errcode(sqlite3 *db);
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
 
 /*
 ** CAPI3REF: Prepared Statement Object
 ** KEYWORDS: {prepared statement} {prepared statements}
 **
 ** An instance of this object represents a single SQL statement that
 ** has been compiled into binary form and is ready to be evaluated.
 **
 ** Think of each SQL statement as a separate computer program.  The
 ** original SQL text is source code.  A prepared statement object 
@@ skipping 47 matching lines @@
 ** off the Internet.  The internal databases can be given the
 ** large, default limits.  Databases managed by external sources can
 ** be given much smaller limits designed to prevent a denial of service
 ** attack.  Developers might also want to use the [sqlite3_set_authorizer()]
 ** interface to further control untrusted SQL.  The size of the database
 ** created by an untrusted script can be contained using the
 ** [max_page_count] [PRAGMA].
 **
 ** New run-time limit categories may be added in future releases.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
+SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
 
 /*
 ** CAPI3REF: Run-Time Limit Categories
 ** KEYWORDS: {limit category} {*limit categories}
 **
 ** These constants define various performance limits
 ** that can be lowered at run-time using [sqlite3_limit()].
 ** The synopsis of the meanings of the various limits is shown below.
 ** Additional information is available at [limits | Limits in SQLite].
 **
@@ skipping 131 matching lines @@
 ** then the statement will be automatically recompiled, as if there had been 
 ** a schema change, on the first  [sqlite3_step()] call following any change
 ** to the [sqlite3_bind_text | bindings] of that [parameter]. 
 ** ^The specific value of WHERE-clause [parameter] might influence the 
 ** choice of query plan if the parameter is the left-hand side of a [LIKE]
 ** or [GLOB] operator or if the parameter is compared to an indexed column
 ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
 ** </li>
 ** </ol>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v2(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare16(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const void **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v2(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const void **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
 
 /*
 ** CAPI3REF: Retrieving Statement SQL
 ** METHOD: sqlite3_stmt
 **
-** ^This interface can be used to retrieve a saved copy of the original
-** SQL text used to create a [prepared statement] if that statement was
-** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8
+** SQL text used to create [prepared statement] P if P was
+** created by either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
+** string containing the SQL text of prepared statement P with
+** [bound parameters] expanded.
+**
+** ^(For example, if a prepared statement is created using the SQL
+** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
+** and parameter :xyz is unbound, then sqlite3_sql() will return
+** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql()
+** will return "SELECT 2345,NULL".)^
+**
+** ^The sqlite3_expanded_sql() interface returns NULL if insufficient memory
+** is available to hold the result, or if the result would exceed the
+** the maximum string length determined by the [SQLITE_LIMIT_LENGTH].
+**
+** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of
+** bound parameter expansions.  ^The [SQLITE_OMIT_TRACE] compile-time
+** option causes sqlite3_expanded_sql() to always return NULL.
+**
+** ^The string returned by sqlite3_sql(P) is managed by SQLite and is
+** automatically freed when the prepared statement is finalized.
+** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
+** is obtained from [sqlite3_malloc()] and must be free by the application
+** by passing it to [sqlite3_free()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Writes The Database
 ** METHOD: sqlite3_stmt
 **
 ** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if
 ** and only if the [prepared statement] X makes no direct changes to
 ** the content of the database file.
 **
 ** Note that [application-defined SQL functions] or
@@ skipping 10 matching lines @@
 ** directly, sqlite3_stmt_readonly() would still return true.)^
 **
 ** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK],
 ** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true,
 ** since the statements themselves do not actually modify the database but
 ** rather they control the timing of when other statements modify the 
 ** database.  ^The [ATTACH] and [DETACH] statements also cause
 ** sqlite3_stmt_readonly() to return true since, while those statements
 ** change the configuration of a database connection, they do not make 
 ** changes to the content of the database files on disk.
+** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since
+** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and
+** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so
+** sqlite3_stmt_readonly() returns false for those commands.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If A Prepared Statement Has Been Reset
 ** METHOD: sqlite3_stmt
 **
 ** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
 ** [prepared statement] S has been stepped at least once using 
 ** [sqlite3_step(S)] but has neither run to completion (returned
 ** [SQLITE_DONE] from [sqlite3_step(S)]) nor
 ** been reset using [sqlite3_reset(S)].  ^The sqlite3_stmt_busy(S)
 ** interface returns false if S is a NULL pointer.  If S is not a 
 ** NULL pointer and is not a pointer to a valid [prepared statement]
 ** object, then the behavior is undefined and probably undesirable.
 **
 ** This interface can be used in combination [sqlite3_next_stmt()]
 ** to locate all prepared statements associated with a database 
 ** connection that are in need of being reset.  This can be used,
 ** for example, in diagnostic routines to search for prepared 
 ** statements that are holding a transaction open.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Dynamically Typed Value Object
 ** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
 **
 ** SQLite uses the sqlite3_value object to represent all values
 ** that can be stored in a database table. SQLite uses dynamic typing
 ** for the values it stores.  ^Values stored in sqlite3_value objects
 ** can be integers, floating point values, strings, BLOBs, or NULL.
 **
@@ skipping 143 matching lines @@
 ** [error code] if anything goes wrong.
 ** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB
 ** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or
 ** [SQLITE_MAX_LENGTH].
 ** ^[SQLITE_RANGE] is returned if the parameter
 ** index is out of range.  ^[SQLITE_NOMEM] is returned if malloc() fails.
 **
 ** See also: [sqlite3_bind_parameter_count()],
 ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
                         void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
+SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
                          void(*)(void*), unsigned char encoding);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
 
 /*
 ** CAPI3REF: Number Of SQL Parameters
 ** METHOD: sqlite3_stmt
 **
 ** ^This routine can be used to find the number of [SQL parameters]
 ** in a [prepared statement].  SQL parameters are tokens of the
 ** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
 ** placeholders for values that are [sqlite3_bind_blob | bound]
 ** to the parameters at a later time.
 **
 ** ^(This routine actually returns the index of the largest (rightmost)
 ** parameter. For all forms except ?NNN, this will correspond to the
 ** number of unique parameters.  If parameters of the ?NNN form are used,
 ** there may be gaps in the list.)^
 **
 ** See also: [sqlite3_bind_blob|sqlite3_bind()],
 ** [sqlite3_bind_parameter_name()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Name Of A Host Parameter
 ** METHOD: sqlite3_stmt
 **
 ** ^The sqlite3_bind_parameter_name(P,N) interface returns
 ** the name of the N-th [SQL parameter] in the [prepared statement] P.
 ** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
 ** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA"
 ** respectively.
 ** In other words, the initial ":" or "$" or "@" or "?"
 ** is included as part of the name.)^
 ** ^Parameters of the form "?" without a following integer have no name
 ** and are referred to as "nameless" or "anonymous parameters".
 **
 ** ^The first host parameter has an index of 1, not 0.
 **
 ** ^If the value N is out of range or if the N-th parameter is
 ** nameless, then NULL is returned.  ^The returned string is
 ** always in UTF-8 encoding even if the named parameter was
 ** originally specified as UTF-16 in [sqlite3_prepare16()] or
 ** [sqlite3_prepare16_v2()].
 **
 ** See also: [sqlite3_bind_blob|sqlite3_bind()],
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
 
 /*
 ** CAPI3REF: Index Of A Parameter With A Given Name
 ** METHOD: sqlite3_stmt
 **
 ** ^Return the index of an SQL parameter given its name.  ^The
 ** index value returned is suitable for use as the second
 ** parameter to [sqlite3_bind_blob|sqlite3_bind()].  ^A zero
 ** is returned if no matching parameter is found.  ^The parameter
 ** name must be given in UTF-8 even if the original statement
 ** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
 **
 ** See also: [sqlite3_bind_blob|sqlite3_bind()],
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_name()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
 
 /*
 ** CAPI3REF: Reset All Bindings On A Prepared Statement
 ** METHOD: sqlite3_stmt
 **
 ** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset
 ** the [sqlite3_bind_blob | bindings] on a [prepared statement].
 ** ^Use this routine to reset all host parameters to NULL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number Of Columns In A Result Set
 ** METHOD: sqlite3_stmt
 **
 ** ^Return the number of columns in the result set returned by the
-** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
-** statement that does not return data (for example an [UPDATE]).
+** [prepared statement]. ^If this routine returns 0, that means the 
+** [prepared statement] returns no data (for example an [UPDATE]).
+** ^However, just because this routine returns a positive number does not
+** mean that one or more rows of data will be returned.  ^A SELECT statement
+** will always have a positive sqlite3_column_count() but depending on the
+** WHERE clause constraints and the table content, it might return no rows.
 **
 ** See also: [sqlite3_data_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Column Names In A Result Set
 ** METHOD: sqlite3_stmt
 **
 ** ^These routines return the name assigned to a particular column
 ** in the result set of a [SELECT] statement.  ^The sqlite3_column_name()
 ** interface returns a pointer to a zero-terminated UTF-8 string
 ** and sqlite3_column_name16() returns a pointer to a zero-terminated
 ** UTF-16 string.  ^The first parameter is the [prepared statement]
 ** that implements the [SELECT] statement. ^The second parameter is the
 ** column number.  ^The leftmost column is number 0.
 **
 ** ^The returned string pointer is valid until either the [prepared statement]
 ** is destroyed by [sqlite3_finalize()] or until the statement is automatically
 ** reprepared by the first call to [sqlite3_step()] for a particular run
 ** or until the next call to
 ** sqlite3_column_name() or sqlite3_column_name16() on the same column.
 **
 ** ^If sqlite3_malloc() fails during the processing of either routine
 ** (for example during a conversion from UTF-8 to UTF-16) then a
 ** NULL pointer is returned.
 **
 ** ^The name of a result column is the value of the "AS" clause for
 ** that column, if there is an AS clause.  If there is no AS clause
 ** then the name of the column is unspecified and may change from
 ** one release of SQLite to the next.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
 
 /*
 ** CAPI3REF: Source Of Data In A Query Result
 ** METHOD: sqlite3_stmt
 **
 ** ^These routines provide a means to determine the database, table, and
 ** table column that is the origin of a particular result column in
 ** [SELECT] statement.
 ** ^The name of the database or table or column can be returned as
 ** either a UTF-8 or UTF-16 string.  ^The _database_ routines return
@@ skipping 27 matching lines @@
 **
 ** If two or more threads call one or more of these routines against the same
 ** prepared statement and column at the same time then the results are
 ** undefined.
 **
 ** If two or more threads call one or more
 ** [sqlite3_column_database_name | column metadata interfaces]
 ** for the same [prepared statement] and result column
 ** at the same time then the results are undefined.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Declared Datatype Of A Query Result
 ** METHOD: sqlite3_stmt
 **
 ** ^(The first parameter is a [prepared statement].
 ** If this statement is a [SELECT] statement and the Nth column of the
 ** returned result set of that [SELECT] is a table column (not an
 ** expression or subquery) then the declared type of the table
 ** column is returned.)^  ^If the Nth column of the result set is an
@@ skipping 11 matching lines @@
 ** this routine would return the string "VARIANT" for the second result
 ** column (i==1), and a NULL pointer for the first result column (i==0).)^
 **
 ** ^SQLite uses dynamic run-time typing.  ^So just because a column
 ** is declared to contain a particular type does not mean that the
 ** data stored in that column is of the declared type.  SQLite is
 ** strongly typed, but the typing is dynamic not static.  ^Type
 ** is associated with individual values, not with the containers
 ** used to hold those values.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Evaluate An SQL Statement
 ** METHOD: sqlite3_stmt
 **
 ** After a [prepared statement] has been prepared using either
 ** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
 ** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
 ** must be called one or more times to evaluate the statement.
 **
@@ skipping 40 matching lines @@
 ** already been [sqlite3_finalize | finalized] or on one that had
 ** previously returned [SQLITE_ERROR] or [SQLITE_DONE].  Or it could
 ** be the case that the same database connection is being used by two or
 ** more threads at the same moment in time.
 **
 ** For all versions of SQLite up to and including 3.6.23.1, a call to
 ** [sqlite3_reset()] was required after sqlite3_step() returned anything
 ** other than [SQLITE_ROW] before any subsequent invocation of
 ** sqlite3_step().  Failure to reset the prepared statement using 
 ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step().  But after version 3.6.23.1, sqlite3_step() began
+** sqlite3_step().  But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step() began
 ** calling [sqlite3_reset()] automatically in this circumstance rather
 ** than returning [SQLITE_MISUSE].  This is not considered a compatibility
 ** break because any application that ever receives an SQLITE_MISUSE error
 ** is broken by definition.  The [SQLITE_OMIT_AUTORESET] compile-time option
 ** can be used to restore the legacy behavior.
 **
 ** <b>Goofy Interface Alert:</b> In the legacy interface, the sqlite3_step()
 ** API always returns a generic error code, [SQLITE_ERROR], following any
 ** error other than [SQLITE_BUSY] and [SQLITE_MISUSE].  You must call
 ** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the
 ** specific [error codes] that better describes the error.
 ** We admit that this is a goofy design.  The problem has been fixed
 ** with the "v2" interface.  If you prepare all of your SQL statements
 ** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
 ** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
 ** then the more specific [error codes] are returned directly
 ** by sqlite3_step().  The use of the "v2" interface is recommended.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
+SQLITE_API int sqlite3_step(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number of columns in a result set
 ** METHOD: sqlite3_stmt
 **
 ** ^The sqlite3_data_count(P) interface returns the number of columns in the
 ** current row of the result set of [prepared statement] P.
 ** ^If prepared statement P does not have results ready to return
 ** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of
 ** interfaces) then sqlite3_data_count(P) returns 0.
 ** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer.
 ** ^The sqlite3_data_count(P) routine returns 0 if the previous call to
 ** [sqlite3_step](P) returned [SQLITE_DONE].  ^The sqlite3_data_count(P)
 ** will return non-zero if previous call to [sqlite3_step](P) returned
 ** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum]
 ** where it always returns zero since each step of that multi-step
 ** pragma returns 0 columns of data.
 **
 ** See also: [sqlite3_column_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Fundamental Datatypes
 ** KEYWORDS: SQLITE_TEXT
 **
 ** ^(Every value in SQLite has one of five fundamental datatypes:
 **
 ** <ul>
 ** <li> 64-bit signed integer
 ** <li> 64-bit IEEE floating point number
@@ skipping 169 matching lines @@
 ** and BLOBs is freed automatically.  Do <em>not</em> pass the pointers returned
 ** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
 ** [sqlite3_free()].
 **
 ** ^(If a memory allocation error occurs during the evaluation of any
 ** of these routines, a default value is returned.  The default value
 ** is either the integer 0, the floating point number 0.0, or a NULL
 ** pointer.  Subsequent calls to [sqlite3_errcode()] will return
 ** [SQLITE_NOMEM].)^
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
+SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
 
 /*
 ** CAPI3REF: Destroy A Prepared Statement Object
 ** DESTRUCTOR: sqlite3_stmt
 **
 ** ^The sqlite3_finalize() function is called to delete a [prepared statement].
 ** ^If the most recent evaluation of the statement encountered no errors
 ** or if the statement is never been evaluated, then sqlite3_finalize() returns
 ** SQLITE_OK.  ^If the most recent evaluation of statement S failed, then
 ** sqlite3_finalize(S) returns the appropriate [error code] or
 ** [extended error code].
 **
 ** ^The sqlite3_finalize(S) routine can be called at any point during
 ** the life cycle of [prepared statement] S:
 ** before statement S is ever evaluated, after
 ** one or more calls to [sqlite3_reset()], or after any call
 ** to [sqlite3_step()] regardless of whether or not the statement has
 ** completed execution.
 **
 ** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op.
 **
 ** The application must finalize every [prepared statement] in order to avoid
 ** resource leaks.  It is a grievous error for the application to try to use
 ** a prepared statement after it has been finalized.  Any use of a prepared
 ** statement after it has been finalized can result in undefined and
 ** undesirable behavior such as segfaults and heap corruption.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Reset A Prepared Statement Object
 ** METHOD: sqlite3_stmt
 **
 ** The sqlite3_reset() function is called to reset a [prepared statement]
 ** object back to its initial state, ready to be re-executed.
 ** ^Any SQL statement variables that had values bound to them using
 ** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
 ** Use [sqlite3_clear_bindings()] to reset the bindings.
 **
 ** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S
 ** back to the beginning of its program.
 **
 ** ^If the most recent call to [sqlite3_step(S)] for the
 ** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
 ** or if [sqlite3_step(S)] has never before been called on S,
 ** then [sqlite3_reset(S)] returns [SQLITE_OK].
 **
 ** ^If the most recent call to [sqlite3_step(S)] for the
 ** [prepared statement] S indicated an error, then
 ** [sqlite3_reset(S)] returns an appropriate [error code].
 **
 ** ^The [sqlite3_reset(S)] interface does not change the values
 ** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Create Or Redefine SQL Functions
 ** KEYWORDS: {function creation routines}
 ** KEYWORDS: {application-defined SQL function}
 ** KEYWORDS: {application-defined SQL functions}
 ** METHOD: sqlite3
 **
 ** ^These functions (collectively known as "function creation routines")
 ** are used to add SQL functions or aggregates or to redefine the behavior
@@ skipping 79 matching lines @@
 ** is a closer match than a function where the encoding difference is
 ** between UTF8 and UTF16.
 **
 ** ^Built-in functions may be overloaded by new application-defined functions.
 **
 ** ^An application-defined function is permitted to call other
 ** SQLite interfaces.  However, such calls must not
 ** close the database connection nor finalize or reset the prepared
 ** statement in which the function is running.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
   int eTextRep,
   void *pApp,
   void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
   sqlite3 *db,
   const void *zFunctionName,
   int nArg,
   int eTextRep,
   void *pApp,
   void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
   int eTextRep,
   void *pApp,
   void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*),
   void(*xDestroy)(void*)
 );
@@ skipping 25 matching lines @@
 ** CAPI3REF: Deprecated Functions
 ** DEPRECATED
 **
 ** These functions are [deprecated].  In order to maintain
 ** backwards compatibility with older code, these functions continue 
 ** to be supported.  However, new applications should avoid
 ** the use of these functions.  To encourage programmers to avoid
 ** these functions, we will not explain what they do.
 */
 #ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
                       void*,sqlite3_int64);
 #endif
 
 /*
 ** CAPI3REF: Obtaining SQL Values
 ** METHOD: sqlite3_value
 **
 ** The C-language implementation of SQL functions and aggregates uses
 ** this set of interface routines to access the parameter values on
 ** the function or aggregate.  
@@ skipping 29 matching lines @@
 **
 ** Please pay particular attention to the fact that the pointer returned
 ** from [sqlite3_value_blob()], [sqlite3_value_text()], or
 ** [sqlite3_value_text16()] can be invalidated by a subsequent call to
 ** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()],
 ** or [sqlite3_value_text16()].
 **
 ** These routines must be called from the same thread as
 ** the SQL function that supplied the [sqlite3_value*] parameters.
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
+SQLITE_API double sqlite3_value_double(sqlite3_value*);
+SQLITE_API int sqlite3_value_int(sqlite3_value*);
+SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
+SQLITE_API int sqlite3_value_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
 
 /*
 ** CAPI3REF: Finding The Subtype Of SQL Values
 ** METHOD: sqlite3_value
 **
 ** The sqlite3_value_subtype(V) function returns the subtype for
 ** an [application-defined SQL function] argument V.  The subtype
 ** information can be used to pass a limited amount of context from
 ** one SQL function to another.  Use the [sqlite3_result_subtype()]
 ** routine to set the subtype for the return value of an SQL function.
 **
 ** SQLite makes no use of subtype itself.  It merely passes the subtype
 ** from the result of one [application-defined SQL function] into the
 ** input of another.
 */
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);
 
 /*
 ** CAPI3REF: Copy And Free SQL Values
 ** METHOD: sqlite3_value
 **
 ** ^The sqlite3_value_dup(V) interface makes a copy of the [sqlite3_value]
 ** object D and returns a pointer to that copy.  ^The [sqlite3_value] returned
 ** is a [protected sqlite3_value] object even if the input is not.
 ** ^The sqlite3_value_dup(V) interface returns NULL if V is NULL or if a
 ** memory allocation fails.
 **
 ** ^The sqlite3_value_free(V) interface frees an [sqlite3_value] object
 ** previously obtained from [sqlite3_value_dup()].  ^If V is a NULL pointer
 ** then sqlite3_value_free(V) is a harmless no-op.
 */
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void sqlite3_value_free(sqlite3_value*);
 
 /*
 ** CAPI3REF: Obtain Aggregate Function Context
 ** METHOD: sqlite3_context
 **
 ** Implementations of aggregate SQL functions use this
 ** routine to allocate memory for storing their state.
 **
 ** ^The first time the sqlite3_aggregate_context(C,N) routine is called 
 ** for a particular aggregate function, SQLite
@@ skipping 24 matching lines @@
 ** sqlite3_aggregate_context() when the aggregate query concludes.
 **
 ** The first parameter must be a copy of the
 ** [sqlite3_context | SQL function context] that is the first parameter
 ** to the xStep or xFinal callback routine that implements the aggregate
 ** function.
 **
 ** This routine must be called from the same thread in which
 ** the aggregate SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
 
 /*
 ** CAPI3REF: User Data For Functions
 ** METHOD: sqlite3_context
 **
 ** ^The sqlite3_user_data() interface returns a copy of
 ** the pointer that was the pUserData parameter (the 5th parameter)
 ** of the [sqlite3_create_function()]
 ** and [sqlite3_create_function16()] routines that originally
 ** registered the application defined function.
 **
 ** This routine must be called from the same thread in which
 ** the application-defined function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
+SQLITE_API void *sqlite3_user_data(sqlite3_context*);
 
 /*
 ** CAPI3REF: Database Connection For Functions
 ** METHOD: sqlite3_context
 **
 ** ^The sqlite3_context_db_handle() interface returns a copy of
 ** the pointer to the [database connection] (the 1st parameter)
 ** of the [sqlite3_create_function()]
 ** and [sqlite3_create_function16()] routines that originally
 ** registered the application defined function.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
 
 /*
 ** CAPI3REF: Function Auxiliary Data
 ** METHOD: sqlite3_context
 **
 ** These functions may be used by (non-aggregate) SQL functions to
 ** associate metadata with argument values. If the same value is passed to
 ** multiple invocations of the same SQL function during query execution, under
 ** some circumstances the associated metadata may be preserved.  An example
 ** of where this might be useful is in a regular-expression matching
@@ skipping 11 matching lines @@
 **
 ** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
 ** argument of the application-defined function.  ^Subsequent
 ** calls to sqlite3_get_auxdata(C,N) return P from the most recent
 ** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or
 ** NULL if the metadata has been discarded.
 ** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL,
 ** SQLite will invoke the destructor function X with parameter P exactly
 ** once, when the metadata is discarded.
 ** SQLite is free to discard the metadata at any time, including: <ul>
-** <li> when the corresponding function parameter changes, or
-** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
-**      SQL statement, or
-** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or
-** <li> during the original sqlite3_set_auxdata() call when a memory 
-**      allocation error occurs. </ul>)^
+** <li> ^(when the corresponding function parameter changes)^, or
+** <li> ^(when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
+**      SQL statement)^, or
+** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
+**       parameter)^, or
+** <li> ^(during the original sqlite3_set_auxdata() call when a memory 
+**      allocation error occurs.)^ </ul>
 **
 ** Note the last bullet in particular.  The destructor X in 
 ** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
 ** sqlite3_set_auxdata() interface even returns.  Hence sqlite3_set_auxdata()
 ** should be called near the end of the function implementation and the
 ** function implementation should not make any use of P after
 ** sqlite3_set_auxdata() has been called.
 **
 ** ^(In practice, metadata is preserved between function calls for
 ** function parameters that are compile-time constants, including literal
 ** values and [parameters] and expressions composed from the same.)^
 **
 ** These routines must be called from the same thread in which
 ** the SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
+SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
 
 
 /*
 ** CAPI3REF: Constants Defining Special Destructor Behavior
 **
 ** These are special values for the destructor that is passed in as the
 ** final argument to routines like [sqlite3_result_blob()].  ^If the destructor
 ** argument is SQLITE_STATIC, it means that the content pointer is constant
 ** and will never change.  It does not need to be destroyed.  ^The
 ** SQLITE_TRANSIENT value means that the content will likely change in
@@ skipping 115 matching lines @@
 ** so that the [sqlite3_value] specified in the parameter may change or
 ** be deallocated after sqlite3_result_value() returns without harm.
 ** ^A [protected sqlite3_value] object may always be used where an
 ** [unprotected sqlite3_value] object is required, so either
 ** kind of [sqlite3_value] object can be used with this interface.
 **
 ** If these routines are called from within the different thread
 ** than the one containing the application-defined function that received
 ** the [sqlite3_context] pointer, the results are undefined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
+SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,
                            sqlite3_uint64,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
+SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
+SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
+SQLITE_API void sqlite3_result_null(sqlite3_context*);
+SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
                            void(*)(void*), unsigned char encoding);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
+SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
 
 
 /*
 ** CAPI3REF: Setting The Subtype Of An SQL Function
 ** METHOD: sqlite3_context
 **
 ** The sqlite3_result_subtype(C,T) function causes the subtype of
 ** the result from the [application-defined SQL function] with 
 ** [sqlite3_context] C to be the value T.  Only the lower 8 bits 
 ** of the subtype T are preserved in current versions of SQLite;
 ** higher order bits are discarded.
 ** The number of subtype bytes preserved by SQLite might increase
 ** in future releases of SQLite.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
+SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);
 
 /*
 ** CAPI3REF: Define New Collating Sequences
 ** METHOD: sqlite3
 **
 ** ^These functions add, remove, or modify a [collation] associated
 ** with the [database connection] specified as the first argument.
 **
 ** ^The name of the collation is a UTF-8 string
 ** for sqlite3_create_collation() and sqlite3_create_collation_v2()
@@ skipping 61 matching lines @@
 ** sqlite3_create_collation_v2() function fails.  Applications that invoke
 ** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should 
 ** check the return code and dispose of the application data pointer
 ** themselves rather than expecting SQLite to deal with it for them.
 ** This is different from every other SQLite interface.  The inconsistency 
 ** is unfortunate but cannot be changed without breaking backwards 
 ** compatibility.
 **
 ** See also:  [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*),
   void(*xDestroy)(void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
   sqlite3*, 
   const void *zName,
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*)
 );
 
 /*
 ** CAPI3REF: Collation Needed Callbacks
 ** METHOD: sqlite3
@@ skipping 14 matching lines @@
 ** sqlite3_collation_needed16().  The second argument is the database
 ** connection.  The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE],
 ** or [SQLITE_UTF16LE], indicating the most desirable form of the collation
 ** sequence function required.  The fourth parameter is the name of the
 ** required collation sequence.)^
 **
 ** The callback function should register the desired collation using
 ** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
 ** [sqlite3_create_collation_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
   sqlite3*, 
   void*, 
   void(*)(void*,sqlite3*,int eTextRep,const char*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
   sqlite3*, 
   void*,
   void(*)(void*,sqlite3*,int eTextRep,const void*)
 );
 
 #ifdef SQLITE_HAS_CODEC
 /*
 ** Specify the key for an encrypted database.  This routine should be
 ** called right after sqlite3_open().
 **
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_key(
+SQLITE_API int sqlite3_key(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
+SQLITE_API int sqlite3_key_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The key */
 );
 
 /*
 ** Change the key on an open database.  If the current database is not
 ** encrypted, this routine will encrypt it.  If pNew==0 or nNew==0, the
 ** database is decrypted.
 **
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
+SQLITE_API int sqlite3_rekey(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The new key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
+SQLITE_API int sqlite3_rekey_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The new key */
 );
 
 /*
 ** Specify the activation key for a SEE database.  Unless 
 ** activated, none of the SEE routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
+SQLITE_API void sqlite3_activate_see(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
 
 #ifdef SQLITE_ENABLE_CEROD
 /*
 ** Specify the activation key for a CEROD database.  Unless 
 ** activated, none of the CEROD routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
+SQLITE_API void sqlite3_activate_cerod(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
 
 /*
 ** CAPI3REF: Suspend Execution For A Short Time
 **
 ** The sqlite3_sleep() function causes the current thread to suspend execution
 ** for at least a number of milliseconds specified in its parameter.
 **
 ** If the operating system does not support sleep requests with
 ** millisecond time resolution, then the time will be rounded up to
 ** the nearest second. The number of milliseconds of sleep actually
 ** requested from the operating system is returned.
 **
 ** ^SQLite implements this interface by calling the xSleep()
 ** method of the default [sqlite3_vfs] object.  If the xSleep() method
 ** of the default VFS is not implemented correctly, or not implemented at
 ** all, then the behavior of sqlite3_sleep() may deviate from the description
 ** in the previous paragraphs.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);
+SQLITE_API int sqlite3_sleep(int);
 
 /*
 ** CAPI3REF: Name Of The Folder Holding Temporary Files
 **
 ** ^(If this global variable is made to point to a string which is
 ** the name of a folder (a.k.a. directory), then all temporary files
 ** created by SQLite when using a built-in [sqlite3_vfs | VFS]
 ** will be placed in that directory.)^  ^If this variable
 ** is a NULL pointer, then SQLite performs a search for an appropriate
 ** temporary file directory.
@@ skipping 98 matching lines @@
 ** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR],
 ** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the
 ** transaction might be rolled back automatically.  The only way to
 ** find out whether SQLite automatically rolled back the transaction after
 ** an error is to use this function.
 **
 ** If another thread changes the autocommit status of the database
 ** connection while this routine is running, then the return value
 ** is undefined.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
+SQLITE_API int sqlite3_get_autocommit(sqlite3*);
 
 /*
 ** CAPI3REF: Find The Database Handle Of A Prepared Statement
 ** METHOD: sqlite3_stmt
 **
 ** ^The sqlite3_db_handle interface returns the [database connection] handle
 ** to which a [prepared statement] belongs.  ^The [database connection]
 ** returned by sqlite3_db_handle is the same [database connection]
 ** that was the first argument
 ** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
 ** create the statement in the first place.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Return The Filename For A Database Connection
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
 ** associated with database N of connection D.  ^The main database file
 ** has the name "main".  If there is no attached database N on the database
 ** connection D, or if database N is a temporary or in-memory database, then
 ** a NULL pointer is returned.
 **
 ** ^The filename returned by this function is the output of the
 ** xFullPathname method of the [VFS].  ^In other words, the filename
 ** will be an absolute pathname, even if the filename used
 ** to open the database originally was a URI or relative pathname.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Determine if a database is read-only
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
 ** of connection D is read-only, 0 if it is read/write, or -1 if N is not
 ** the name of a database on connection D.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Find the next prepared statement
 ** METHOD: sqlite3
 **
 ** ^This interface returns a pointer to the next [prepared statement] after
 ** pStmt associated with the [database connection] pDb.  ^If pStmt is NULL
 ** then this interface returns a pointer to the first prepared statement
 ** associated with the database connection pDb.  ^If no prepared statement
 ** satisfies the conditions of this routine, it returns NULL.
 **
 ** The [database connection] pointer D in a call to
 ** [sqlite3_next_stmt(D,S)] must refer to an open database
 ** connection and in particular must not be a NULL pointer.
 */
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Commit And Rollback Notification Callbacks
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_commit_hook() interface registers a callback
 ** function to be invoked whenever a transaction is [COMMIT | committed].
 ** ^Any callback set by a previous call to sqlite3_commit_hook()
 ** for the same database connection is overridden.
 ** ^The sqlite3_rollback_hook() interface registers a callback
@@ skipping 28 matching lines @@
 ** hook returning non-zero, just as it would be with any other rollback.
 **
 ** ^For the purposes of this API, a transaction is said to have been
 ** rolled back if an explicit "ROLLBACK" statement is executed, or
 ** an error or constraint causes an implicit rollback to occur.
 ** ^The rollback callback is not invoked if a transaction is
 ** automatically rolled back because the database connection is closed.
 **
 ** See also the [sqlite3_update_hook()] interface.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
 
 /*
 ** CAPI3REF: Data Change Notification Callbacks
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_update_hook() interface registers a callback function
 ** with the [database connection] identified by the first argument
 ** to be invoked whenever a row is updated, inserted or deleted in
-** a rowid table.
+** a [rowid table].
 ** ^Any callback set by a previous call to this function
 ** for the same database connection is overridden.
 **
 ** ^The second argument is a pointer to the function to invoke when a
 ** row is updated, inserted or deleted in a rowid table.
 ** ^The first argument to the callback is a copy of the third argument
 ** to sqlite3_update_hook().
 ** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
 ** or [SQLITE_UPDATE], depending on the operation that caused the callback
 ** to be invoked.
 ** ^The third and fourth arguments to the callback contain pointers to the
 ** database and table name containing the affected row.
 ** ^The final callback parameter is the [rowid] of the row.
 ** ^In the case of an update, this is the [rowid] after the update takes place.
 **
 ** ^(The update hook is not invoked when internal system tables are
 ** modified (i.e. sqlite_master and sqlite_sequence).)^
 ** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
 **
 ** ^In the current implementation, the update hook
-** is not invoked when duplication rows are deleted because of an
+** is not invoked when conflicting rows are deleted because of an
 ** [ON CONFLICT | ON CONFLICT REPLACE] clause.  ^Nor is the update hook
 ** invoked when rows are deleted using the [truncate optimization].
 ** The exceptions defined in this paragraph might change in a future
 ** release of SQLite.
 **
 ** The update hook implementation must not do anything that will modify
 ** the database connection that invoked the update hook.  Any actions
 ** to modify the database connection must be deferred until after the
 ** completion of the [sqlite3_step()] call that triggered the update hook.
 ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
 ** database connections for the meaning of "modify" in this paragraph.
 **
 ** ^The sqlite3_update_hook(D,C,P) function
 ** returns the P argument from the previous call
 ** on the same [database connection] D, or NULL for
 ** the first call on D.
 **
-** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]
-** interfaces.
+** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
+** and [sqlite3_preupdate_hook()] interfaces.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
   sqlite3*, 
   void(*)(void *,int ,char const *,char const *,sqlite3_int64),
   void*
 );
 
 /*
 ** CAPI3REF: Enable Or Disable Shared Pager Cache
 **
 ** ^(This routine enables or disables the sharing of the database cache
 ** and schema data structures between [database connection | connections]
 ** to the same database. Sharing is enabled if the argument is true
 ** and disabled if the argument is false.)^
 **
 ** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]). 
+** In prior versions of SQLite,
 ** sharing was enabled or disabled for each thread separately.
 **
 ** ^(The cache sharing mode set by this interface effects all subsequent
 ** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
 ** Existing database connections continue use the sharing mode
 ** that was in effect at the time they were opened.)^
 **
 ** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled
 ** successfully.  An [error code] is returned otherwise.)^
 **
 ** ^Shared cache is disabled by default. But this might change in
 ** future releases of SQLite.  Applications that care about shared
 ** cache setting should set it explicitly.
 **
 ** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0
 ** and will always return SQLITE_MISUSE. On those systems, 
 ** shared cache mode should be enabled per-database connection via 
 ** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE].
 **
 ** This interface is threadsafe on processors where writing a
 ** 32-bit integer is atomic.
 **
 ** See Also:  [SQLite Shared-Cache Mode]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
+SQLITE_API int sqlite3_enable_shared_cache(int);
 
 /*
 ** CAPI3REF: Attempt To Free Heap Memory
 **
 ** ^The sqlite3_release_memory() interface attempts to free N bytes
 ** of heap memory by deallocating non-essential memory allocations
 ** held by the database library.   Memory used to cache database
 ** pages to improve performance is an example of non-essential memory.
 ** ^sqlite3_release_memory() returns the number of bytes actually freed,
 ** which might be more or less than the amount requested.
 ** ^The sqlite3_release_memory() routine is a no-op returning zero
 ** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT].
 **
 ** See also: [sqlite3_db_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
+SQLITE_API int sqlite3_release_memory(int);
 
 /*
 ** CAPI3REF: Free Memory Used By A Database Connection
 ** METHOD: sqlite3
 **
 ** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap
 ** memory as possible from database connection D. Unlike the
 ** [sqlite3_release_memory()] interface, this interface is in effect even
 ** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is
 ** omitted.
 **
 ** See also: [sqlite3_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
 
 /*
 ** CAPI3REF: Impose A Limit On Heap Size
 **
 ** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the
 ** soft limit on the amount of heap memory that may be allocated by SQLite.
 ** ^SQLite strives to keep heap memory utilization below the soft heap
 ** limit by reducing the number of pages held in the page cache
 ** as heap memory usages approaches the limit.
 ** ^The soft heap limit is "soft" because even though SQLite strives to stay
@@ skipping 18 matching lines @@
 ** <li> Memory accounting is disabled using a combination of the
 **      [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and
 **      the [SQLITE_DEFAULT_MEMSTATUS] compile-time option.
 ** <li> An alternative page cache implementation is specified using
 **      [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...).
 ** <li> The page cache allocates from its own memory pool supplied
 **      by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than
 **      from the heap.
 ** </ul>)^
 **
-** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]), 
+** the soft heap limit is enforced
 ** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
 ** compile-time option is invoked.  With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
 ** the soft heap limit is enforced on every memory allocation.  Without
 ** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced
 ** when memory is allocated by the page cache.  Testing suggests that because
 ** the page cache is the predominate memory user in SQLite, most
 ** applications will achieve adequate soft heap limit enforcement without
 ** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT].
 **
 ** The circumstances under which SQLite will enforce the soft heap limit may
 ** changes in future releases of SQLite.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
 
 /*
 ** CAPI3REF: Deprecated Soft Heap Limit Interface
 ** DEPRECATED
 **
 ** This is a deprecated version of the [sqlite3_soft_heap_limit64()]
 ** interface.  This routine is provided for historical compatibility
 ** only.  All new applications should use the
 ** [sqlite3_soft_heap_limit64()] interface rather than this one.
 */
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
 
 
 /*
 ** CAPI3REF: Extract Metadata About A Column Of A Table
 ** METHOD: sqlite3
 **
 ** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns
 ** information about column C of table T in database D
 ** on [database connection] X.)^  ^The sqlite3_table_column_metadata()
 ** interface returns SQLITE_OK and fills in the non-NULL pointers in
 ** the final five arguments with appropriate values if the specified
 ** column exists.  ^The sqlite3_table_column_metadata() interface returns
 ** SQLITE_ERROR and if the specified column does not exist.
 ** ^If the column-name parameter to sqlite3_table_column_metadata() is a
-** NULL pointer, then this routine simply checks for the existance of the
+** NULL pointer, then this routine simply checks for the existence of the
 ** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
 ** does not.
 **
 ** ^The column is identified by the second, third and fourth parameters to
 ** this function. ^(The second parameter is either the name of the database
 ** (i.e. "main", "temp", or an attached database) containing the specified
 ** table or NULL.)^ ^If it is NULL, then all attached databases are searched
 ** for the table using the same algorithm used by the database engine to
 ** resolve unqualified table references.
 **
@@ skipping 34 matching lines @@
 **     collation sequence: "BINARY"
 **     not null: 0
 **     primary key: 1
 **     auto increment: 0
 ** </pre>)^
 **
 ** ^This function causes all database schemas to be read from disk and
 ** parsed, if that has not already been done, and returns an error if
 ** any errors are encountered while loading the schema.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
   sqlite3 *db,                /* Connection handle */
   const char *zDbName,        /* Database name or NULL */
   const char *zTableName,     /* Table name */
   const char *zColumnName,    /* Column name */
   char const **pzDataType,    /* OUTPUT: Declared data type */
   char const **pzCollSeq,     /* OUTPUT: Collation sequence name */
   int *pNotNull,              /* OUTPUT: True if NOT NULL constraint exists */
   int *pPrimaryKey,           /* OUTPUT: True if column part of PK */
   int *pAutoinc               /* OUTPUT: True if column is auto-increment */
 );
@@ skipping 21 matching lines @@
 ** "." and omitting any initial "lib".)^
 ** ^The sqlite3_load_extension() interface returns
 ** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
 ** ^If an error occurs and pzErrMsg is not 0, then the
 ** [sqlite3_load_extension()] interface shall attempt to
 ** fill *pzErrMsg with error message text stored in memory
 ** obtained from [sqlite3_malloc()]. The calling function
 ** should free this memory by calling [sqlite3_free()].
 **
 ** ^Extension loading must be enabled using
-** [sqlite3_enable_load_extension()] prior to calling this API,
+** [sqlite3_enable_load_extension()] or
+** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL)
+** prior to calling this API,
 ** otherwise an error will be returned.
 **
+** <b>Security warning:</b> It is recommended that the 
+** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
+** interface.  The use of the [sqlite3_enable_load_extension()] interface
+** should be avoided.  This will keep the SQL function [load_extension()]
+** disabled and prevent SQL injections from giving attackers
+** access to extension loading capabilities.
+**
 ** See also the [load_extension() SQL function].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
   sqlite3 *db,          /* Load the extension into this database connection */
   const char *zFile,    /* Name of the shared library containing extension */
   const char *zProc,    /* Entry point.  Derived from zFile if 0 */
   char **pzErrMsg       /* Put error message here if not 0 */
 );
 
 /*
 ** CAPI3REF: Enable Or Disable Extension Loading
 ** METHOD: sqlite3
 **
 ** ^So as not to open security holes in older applications that are
 ** unprepared to deal with [extension loading], and as a means of disabling
 ** [extension loading] while evaluating user-entered SQL, the following API
 ** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
 **
 ** ^Extension loading is off by default.
 ** ^Call the sqlite3_enable_load_extension() routine with onoff==1
 ** to turn extension loading on and call it with onoff==0 to turn
 ** it back off again.
+**
+** ^This interface enables or disables both the C-API
+** [sqlite3_load_extension()] and the SQL function [load_extension()].
+** ^(Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..)
+** to enable or disable only the C-API.)^
+**
+** <b>Security warning:</b> It is recommended that extension loading
+** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method
+** rather than this interface, so the [load_extension()] SQL function
+** remains disabled. This will prevent SQL injections from giving attackers
+** access to extension loading capabilities.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
 
 /*
 ** CAPI3REF: Automatically Load Statically Linked Extensions
 **
 ** ^This interface causes the xEntryPoint() function to be invoked for
 ** each new [database connection] that is created.  The idea here is that
 ** xEntryPoint() is the entry point for a statically linked [SQLite extension]
 ** that is to be automatically loaded into all new database connections.
 **
 ** ^(Even though the function prototype shows that xEntryPoint() takes
 ** no arguments and returns void, SQLite invokes xEntryPoint() with three
-** arguments and expects and integer result as if the signature of the
+** arguments and expects an integer result as if the signature of the
 ** entry point where as follows:
 **
 ** <blockquote><pre>
 ** &nbsp;  int xEntryPoint(
 ** &nbsp;    sqlite3 *db,
 ** &nbsp;    const char **pzErrMsg,
 ** &nbsp;    const struct sqlite3_api_routines *pThunk
 ** &nbsp;  );
 ** </pre></blockquote>)^
 **
 ** If the xEntryPoint routine encounters an error, it should make *pzErrMsg
 ** point to an appropriate error message (obtained from [sqlite3_mprintf()])
 ** and return an appropriate [error code].  ^SQLite ensures that *pzErrMsg
 ** is NULL before calling the xEntryPoint().  ^SQLite will invoke
 ** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns.  ^If any
 ** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()],
 ** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail.
 **
 ** ^Calling sqlite3_auto_extension(X) with an entry point X that is already
 ** on the list of automatic extensions is a harmless no-op. ^No entry point
 ** will be called more than once for each database connection that is opened.
 **
 ** See also: [sqlite3_reset_auto_extension()]
 ** and [sqlite3_cancel_auto_extension()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Cancel Automatic Extension Loading
 **
 ** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
 ** initialization routine X that was registered using a prior call to
 ** [sqlite3_auto_extension(X)].  ^The [sqlite3_cancel_auto_extension(X)]
 ** routine returns 1 if initialization routine X was successfully 
 ** unregistered and it returns 0 if X was not on the list of initialization
 ** routines.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Reset Automatic Extension Loading
 **
 ** ^This interface disables all automatic extensions previously
 ** registered using [sqlite3_auto_extension()].
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);
+SQLITE_API void sqlite3_reset_auto_extension(void);
 
 /*
 ** The interface to the virtual-table mechanism is currently considered
 ** to be experimental.  The interface might change in incompatible ways.
 ** If this is a problem for you, do not use the interface at this time.
 **
 ** When the virtual-table mechanism stabilizes, we will declare the
 ** interface fixed, support it indefinitely, and remove this comment.
 */
 
@@ skipping 133 matching lines @@
 ** SQLite also assumes that if a call to the xUpdate() method is made as
 ** part of the same statement to delete or update a virtual table row and the
 ** implementation returns SQLITE_CONSTRAINT, then there is no need to rollback
 ** any database changes. In other words, if the xUpdate() returns
 ** SQLITE_CONSTRAINT, the database contents must be exactly as they were
 ** before xUpdate was called. By contrast, if SQLITE_INDEX_SCAN_UNIQUE is not
 ** set and xUpdate returns SQLITE_CONSTRAINT, any database changes made by
 ** the xUpdate method are automatically rolled back by SQLite.
 **
 ** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite version 3.8.2. If a virtual table extension is
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]). 
+** If a virtual table extension is
 ** used with an SQLite version earlier than 3.8.2, the results of attempting 
 ** to read or write the estimatedRows field are undefined (but are likely 
 ** to included crashing the application). The estimatedRows field should
 ** therefore only be used if [sqlite3_libversion_number()] returns a
 ** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for version 3.9.0. It may therefore only be used if
+** was added for [version 3.9.0] ([dateof:3.9.0]). 
+** It may therefore only be used if
 ** sqlite3_libversion_number() returns a value greater than or equal to
 ** 3009000.
 */
 struct sqlite3_index_info {
   /* Inputs */
   int nConstraint;           /* Number of entries in aConstraint */
   struct sqlite3_index_constraint {
-     int iColumn;              /* Column on left-hand side of constraint */
+     int iColumn;              /* Column constrained.  -1 for ROWID */
      unsigned char op;         /* Constraint operator */
      unsigned char usable;     /* True if this constraint is usable */
      int iTermOffset;          /* Used internally - xBestIndex should ignore */
   } *aConstraint;            /* Table of WHERE clause constraints */
   int nOrderBy;              /* Number of terms in the ORDER BY clause */
   struct sqlite3_index_orderby {
      int iColumn;              /* Column number */
      unsigned char desc;       /* True for DESC.  False for ASC. */
   } *aOrderBy;               /* The ORDER BY clause */
   /* Outputs */
@@ skipping 56 matching lines @@
 **
 ** ^The sqlite3_create_module_v2() interface has a fifth parameter which
 ** is a pointer to a destructor for the pClientData.  ^SQLite will
 ** invoke the destructor function (if it is not NULL) when SQLite
 ** no longer needs the pClientData pointer.  ^The destructor will also
 ** be invoked if the call to sqlite3_create_module_v2() fails.
 ** ^The sqlite3_create_module()
 ** interface is equivalent to sqlite3_create_module_v2() with a NULL
 ** destructor.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
   void *pClientData          /* Client data for xCreate/xConnect */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
   void *pClientData,         /* Client data for xCreate/xConnect */
   void(*xDestroy)(void*)     /* Module destructor function */
 );
 
 /*
 ** CAPI3REF: Virtual Table Instance Object
 ** KEYWORDS: sqlite3_vtab
@@ skipping 42 matching lines @@
 };
 
 /*
 ** CAPI3REF: Declare The Schema Of A Virtual Table
 **
 ** ^The [xCreate] and [xConnect] methods of a
 ** [virtual table module] call this interface
 ** to declare the format (the names and datatypes of the columns) of
 ** the virtual tables they implement.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
+SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
 
 /*
 ** CAPI3REF: Overload A Function For A Virtual Table
 ** METHOD: sqlite3
 **
 ** ^(Virtual tables can provide alternative implementations of functions
 ** using the [xFindFunction] method of the [virtual table module].  
 ** But global versions of those functions
 ** must exist in order to be overloaded.)^
 **
 ** ^(This API makes sure a global version of a function with a particular
 ** name and number of parameters exists.  If no such function exists
 ** before this API is called, a new function is created.)^  ^The implementation
 ** of the new function always causes an exception to be thrown.  So
 ** the new function is not good for anything by itself.  Its only
 ** purpose is to be a placeholder function that can be overloaded
 ** by a [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
 
 /*
 ** The interface to the virtual-table mechanism defined above (back up
 ** to a comment remarkably similar to this one) is currently considered
 ** to be experimental.  The interface might change in incompatible ways.
 ** If this is a problem for you, do not use the interface at this time.
 **
 ** When the virtual-table mechanism stabilizes, we will declare the
 ** interface fixed, support it indefinitely, and remove this comment.
 */
@@ skipping 54 matching lines @@
 **         constraint and the blob is being opened for read/write access)^,
 **   <li> ^([foreign key constraints | Foreign key constraints] are enabled, 
 **         column zColumn is part of a [child key] definition and the blob is
 **         being opened for read/write access)^.
 ** </ul>
 **
 ** ^Unless it returns SQLITE_MISUSE, this function sets the 
 ** [database connection] error code and message accessible via 
 ** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. 
 **
+** A BLOB referenced by sqlite3_blob_open() may be read using the
+** [sqlite3_blob_read()] interface and modified by using
+** [sqlite3_blob_write()].  The [BLOB handle] can be moved to a
+** different row of the same table using the [sqlite3_blob_reopen()]
+** interface.  However, the column, table, or database of a [BLOB handle]
+** cannot be changed after the [BLOB handle] is opened.
 **
 ** ^(If the row that a BLOB handle points to is modified by an
 ** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
 ** then the BLOB handle is marked as "expired".
 ** This is true if any column of the row is changed, even a column
 ** other than the one the BLOB handle is open on.)^
 ** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
 ** an expired BLOB handle fail with a return code of [SQLITE_ABORT].
 ** ^(Changes written into a BLOB prior to the BLOB expiring are not
 ** rolled back by the expiration of the BLOB.  Such changes will eventually
 ** commit if the transaction continues to completion.)^
 **
 ** ^Use the [sqlite3_blob_bytes()] interface to determine the size of
 ** the opened blob.  ^The size of a blob may not be changed by this
 ** interface.  Use the [UPDATE] SQL command to change the size of a
 ** blob.
 **
 ** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
 ** and the built-in [zeroblob] SQL function may be used to create a 
 ** zero-filled blob to read or write using the incremental-blob interface.
 **
 ** To avoid a resource leak, every open [BLOB handle] should eventually
 ** be released by a call to [sqlite3_blob_close()].
+**
+** See also: [sqlite3_blob_close()],
+** [sqlite3_blob_reopen()], [sqlite3_blob_read()],
+** [sqlite3_blob_bytes()], [sqlite3_blob_write()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
   sqlite3*,
   const char *zDb,
   const char *zTable,
   const char *zColumn,
   sqlite3_int64 iRow,
   int flags,
   sqlite3_blob **ppBlob
 );
 
 /*
 ** CAPI3REF: Move a BLOB Handle to a New Row
 ** METHOD: sqlite3_blob
 **
-** ^This function is used to move an existing blob handle so that it points
+** ^This function is used to move an existing [BLOB handle] so that it points
 ** to a different row of the same database table. ^The new row is identified
 ** by the rowid value passed as the second argument. Only the row can be
 ** changed. ^The database, table and column on which the blob handle is open
-** remain the same. Moving an existing blob handle to a new row can be
+** remain the same. Moving an existing [BLOB handle] to a new row is
 ** faster than closing the existing handle and opening a new one.
 **
 ** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] -
 ** it must exist and there must be either a blob or text value stored in
 ** the nominated column.)^ ^If the new row is not present in the table, or if
 ** it does not contain a blob or text value, or if another error occurs, an
 ** SQLite error code is returned and the blob handle is considered aborted.
 ** ^All subsequent calls to [sqlite3_blob_read()], [sqlite3_blob_write()] or
 ** [sqlite3_blob_reopen()] on an aborted blob handle immediately return
 ** SQLITE_ABORT. ^Calling [sqlite3_blob_bytes()] on an aborted blob handle
 ** always returns zero.
 **
 ** ^This function sets the database handle error code and message.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
 
 /*
 ** CAPI3REF: Close A BLOB Handle
 ** DESTRUCTOR: sqlite3_blob
 **
 ** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed
 ** unconditionally.  Even if this routine returns an error code, the 
 ** handle is still closed.)^
 **
 ** ^If the blob handle being closed was opened for read-write access, and if
 ** the database is in auto-commit mode and there are no other open read-write
 ** blob handles or active write statements, the current transaction is
 ** committed. ^If an error occurs while committing the transaction, an error
 ** code is returned and the transaction rolled back.
 **
 ** Calling this function with an argument that is not a NULL pointer or an
 ** open blob handle results in undefined behaviour. ^Calling this routine 
 ** with a null pointer (such as would be returned by a failed call to 
 ** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function
 ** is passed a valid open blob handle, the values returned by the 
 ** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Return The Size Of An Open BLOB
 ** METHOD: sqlite3_blob
 **
 ** ^Returns the size in bytes of the BLOB accessible via the 
 ** successfully opened [BLOB handle] in its only argument.  ^The
 ** incremental blob I/O routines can only read or overwriting existing
 ** blob content; they cannot change the size of a blob.
 **
 ** This routine only works on a [BLOB handle] which has been created
 ** by a prior successful call to [sqlite3_blob_open()] and which has not
 ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
 ** to this routine results in undefined and probably undesirable behavior.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Read Data From A BLOB Incrementally
 ** METHOD: sqlite3_blob
 **
 ** ^(This function is used to read data from an open [BLOB handle] into a
 ** caller-supplied buffer. N bytes of data are copied into buffer Z
 ** from the open BLOB, starting at offset iOffset.)^
 **
 ** ^If offset iOffset is less than N bytes from the end of the BLOB,
 ** [SQLITE_ERROR] is returned and no data is read.  ^If N or iOffset is
 ** less than zero, [SQLITE_ERROR] is returned and no data is read.
 ** ^The size of the blob (and hence the maximum value of N+iOffset)
 ** can be determined using the [sqlite3_blob_bytes()] interface.
 **
 ** ^An attempt to read from an expired [BLOB handle] fails with an
 ** error code of [SQLITE_ABORT].
 **
 ** ^(On success, sqlite3_blob_read() returns SQLITE_OK.
 ** Otherwise, an [error code] or an [extended error code] is returned.)^
 **
 ** This routine only works on a [BLOB handle] which has been created
 ** by a prior successful call to [sqlite3_blob_open()] and which has not
 ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
 ** to this routine results in undefined and probably undesirable behavior.
 **
 ** See also: [sqlite3_blob_write()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
 
 /*
 ** CAPI3REF: Write Data Into A BLOB Incrementally
 ** METHOD: sqlite3_blob
 **
 ** ^(This function is used to write data into an open [BLOB handle] from a
 ** caller-supplied buffer. N bytes of data are copied from the buffer Z
 ** into the open BLOB, starting at offset iOffset.)^
 **
 ** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
@@ skipping 21 matching lines @@
 ** have been overwritten by the statement that expired the BLOB handle
 ** or by other independent statements.
 **
 ** This routine only works on a [BLOB handle] which has been created
 ** by a prior successful call to [sqlite3_blob_open()] and which has not
 ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
 ** to this routine results in undefined and probably undesirable behavior.
 **
 ** See also: [sqlite3_blob_read()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
 
 /*
 ** CAPI3REF: Virtual File System Objects
 **
 ** A virtual filesystem (VFS) is an [sqlite3_vfs] object
 ** that SQLite uses to interact
 ** with the underlying operating system.  Most SQLite builds come with a
 ** single default VFS that is appropriate for the host computer.
 ** New VFSes can be registered and existing VFSes can be unregistered.
 ** The following interfaces are provided.
@@ skipping 10 matching lines @@
 ** ^To make an existing VFS into the default VFS, register it again
 ** with the makeDflt flag set.  If two different VFSes with the
 ** same name are registered, the behavior is undefined.  If a
 ** VFS is registered with a name that is NULL or an empty string,
 ** then the behavior is undefined.
 **
 ** ^Unregister a VFS with the sqlite3_vfs_unregister() interface.
 ** ^(If the default VFS is unregistered, another VFS is chosen as
 ** the default.  The choice for the new VFS is arbitrary.)^
 */
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
 
 /*
 ** CAPI3REF: Mutexes
 **
 ** The SQLite core uses these routines for thread
 ** synchronization. Though they are intended for internal
 ** use by SQLite, code that links against SQLite is
 ** permitted to use any of these routines.
 **
 ** The SQLite source code contains multiple implementations
@@ skipping 95 matching lines @@
 ** previously entered by the same thread.   The behavior
 ** is undefined if the mutex is not currently entered by the
 ** calling thread or is not currently allocated.
 **
 ** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
 ** sqlite3_mutex_leave() is a NULL pointer, then all three routines
 ** behave as no-ops.
 **
 ** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
 
 /*
 ** CAPI3REF: Mutex Methods Object
 **
 ** An instance of this structure defines the low-level routines
 ** used to allocate and use mutexes.
 **
 ** Usually, the default mutex implementations provided by SQLite are
 ** sufficient, however the application has the option of substituting a custom
 ** implementation for specialized deployments or systems for which SQLite
@@ skipping 89 matching lines @@
 ** If the argument to sqlite3_mutex_held() is a NULL pointer then
 ** the routine should return 1.   This seems counter-intuitive since
 ** clearly the mutex cannot be held if it does not exist.  But
 ** the reason the mutex does not exist is because the build is not
 ** using mutexes.  And we do not want the assert() containing the
 ** call to sqlite3_mutex_held() to fail, so a non-zero return is
 ** the appropriate thing to do.  The sqlite3_mutex_notheld()
 ** interface should also return 1 when given a NULL pointer.
 */
 #ifndef NDEBUG
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
 #endif
 
 /*
 ** CAPI3REF: Mutex Types
 **
 ** The [sqlite3_mutex_alloc()] interface takes a single argument
 ** which is one of these integer constants.
 **
 ** The set of static mutexes may change from one SQLite release to the
 ** next.  Applications that override the built-in mutex logic must be
 ** prepared to accommodate additional static mutexes.
 */
 #define SQLITE_MUTEX_FAST             0
 #define SQLITE_MUTEX_RECURSIVE        1
 #define SQLITE_MUTEX_STATIC_MASTER    2
 #define SQLITE_MUTEX_STATIC_MEM       3  /* sqlite3_malloc() */
 #define SQLITE_MUTEX_STATIC_MEM2      4  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_OPEN      4  /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_random() */
+#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_randomness() */
 #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
 #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
 #define SQLITE_MUTEX_STATIC_APP1      8  /* For use by application */
 #define SQLITE_MUTEX_STATIC_APP2      9  /* For use by application */
 #define SQLITE_MUTEX_STATIC_APP3     10  /* For use by application */
 #define SQLITE_MUTEX_STATIC_VFS1     11  /* For use by built-in VFS */
 #define SQLITE_MUTEX_STATIC_VFS2     12  /* For use by extension VFS */
 #define SQLITE_MUTEX_STATIC_VFS3     13  /* For use by application VFS */
 
 /*
 ** CAPI3REF: Retrieve the mutex for a database connection
 ** METHOD: sqlite3
 **
 ** ^This interface returns a pointer the [sqlite3_mutex] object that 
 ** serializes access to the [database connection] given in the argument
 ** when the [threading mode] is Serialized.
 ** ^If the [threading mode] is Single-thread or Multi-thread then this
 ** routine returns a NULL pointer.
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
 
 /*
 ** CAPI3REF: Low-Level Control Of Database Files
 ** METHOD: sqlite3
 **
 ** ^The [sqlite3_file_control()] interface makes a direct call to the
 ** xFileControl method for the [sqlite3_io_methods] object associated
 ** with a particular database identified by the second argument. ^The
 ** name of the database is "main" for the main database or "temp" for the
 ** TEMP database, or the name that appears after the AS keyword for
@@ skipping 14 matching lines @@
 ** ^If the second parameter (zDbName) does not match the name of any
 ** open database file, then SQLITE_ERROR is returned.  ^This error
 ** code is not remembered and will not be recalled by [sqlite3_errcode()]
 ** or [sqlite3_errmsg()].  The underlying xFileControl method might
 ** also return SQLITE_ERROR.  There is no way to distinguish between
 ** an incorrect zDbName and an SQLITE_ERROR return from the underlying
 ** xFileControl method.
 **
 ** See also: [SQLITE_FCNTL_LOCKSTATE]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
 
 /*
 ** CAPI3REF: Testing Interface
 **
 ** ^The sqlite3_test_control() interface is used to read out internal
 ** state of SQLite and to inject faults into SQLite for testing
 ** purposes.  ^The first parameter is an operation code that determines
 ** the number, meaning, and operation of all subsequent parameters.
 **
 ** This interface is not for use by applications.  It exists solely
 ** for verifying the correct operation of the SQLite library.  Depending
 ** on how the SQLite library is compiled, this interface might not exist.
 **
 ** The details of the operation codes, their meanings, the parameters
 ** they take, and what they do are all subject to change without notice.
 ** Unlike most of the SQLite API, this function is not guaranteed to
 ** operate consistently from one release to the next.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
+SQLITE_API int sqlite3_test_control(int op, ...);
 
 /*
 ** CAPI3REF: Testing Interface Operation Codes
 **
 ** These constants are the valid operation code parameters used
 ** as the first argument to [sqlite3_test_control()].
 **
 ** These parameters and their meanings are subject to change
 ** without notice.  These values are for testing purposes only.
 ** Applications should not use any of these parameters or the
 ** [sqlite3_test_control()] interface.
 */
 #define SQLITE_TESTCTRL_FIRST                    5
 #define SQLITE_TESTCTRL_PRNG_SAVE                5
 #define SQLITE_TESTCTRL_PRNG_RESTORE             6
 #define SQLITE_TESTCTRL_PRNG_RESET               7
 #define SQLITE_TESTCTRL_BITVEC_TEST              8
 #define SQLITE_TESTCTRL_FAULT_INSTALL            9
 #define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS     10
 #define SQLITE_TESTCTRL_PENDING_BYTE            11
 #define SQLITE_TESTCTRL_ASSERT                  12
 #define SQLITE_TESTCTRL_ALWAYS                  13
 #define SQLITE_TESTCTRL_RESERVE                 14
 #define SQLITE_TESTCTRL_OPTIMIZATIONS           15
 #define SQLITE_TESTCTRL_ISKEYWORD               16
 #define SQLITE_TESTCTRL_SCRATCHMALLOC           17
 #define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
 #define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
+#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD    19
 #define SQLITE_TESTCTRL_NEVER_CORRUPT           20
 #define SQLITE_TESTCTRL_VDBE_COVERAGE           21
 #define SQLITE_TESTCTRL_BYTEORDER               22
 #define SQLITE_TESTCTRL_ISINIT                  23
 #define SQLITE_TESTCTRL_SORTER_MMAP             24
 #define SQLITE_TESTCTRL_IMPOSTER                25
 #define SQLITE_TESTCTRL_LAST                    25
 
 /*
 ** CAPI3REF: SQLite Runtime Status
@@ skipping 14 matching lines @@
 **
 ** ^The sqlite3_status() and sqlite3_status64() routines return
 ** SQLITE_OK on success and a non-zero [error code] on failure.
 **
 ** If either the current value or the highwater mark is too large to
 ** be represented by a 32-bit integer, then the values returned by
 ** sqlite3_status() are undefined.
 **
 ** See also: [sqlite3_db_status()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status64(
   int op,
   sqlite3_int64 *pCurrent,
   sqlite3_int64 *pHighwater,
   int resetFlag
 );
 
 
 /*
 ** CAPI3REF: Status Parameters
 ** KEYWORDS: {status parameters}
@@ skipping 104 matching lines @@
 ** ^The current value of the requested parameter is written into *pCur
 ** and the highest instantaneous value is written into *pHiwtr.  ^If
 ** the resetFlg is true, then the highest instantaneous value is
 ** reset back down to the current value.
 **
 ** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a
 ** non-zero [error code] on failure.
 **
 ** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for database connections
 ** KEYWORDS: {SQLITE_DBSTATUS options}
 **
 ** These constants are the available integer "verbs" that can be passed as
 ** the second argument to the [sqlite3_db_status()] interface.
 **
 ** New verbs may be added in future releases of SQLite. Existing verbs
 ** might be discontinued. Applications should check the return code from
@@ skipping 25 matching lines @@
 ** been satisfied using lookaside memory but failed due to all lookaside
 ** memory already being in use.
 ** Only the high-water value is meaningful;
 ** the current value is always zero.)^
 **
 ** [[SQLITE_DBSTATUS_CACHE_USED]] ^(<dt>SQLITE_DBSTATUS_CACHE_USED</dt>
 ** <dd>This parameter returns the approximate number of bytes of heap
 ** memory used by all pager caches associated with the database connection.)^
 ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
 **
+** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]] 
+** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
+** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
+** pager cache is shared between two or more connections the bytes of heap
+** memory used by that pager cache is divided evenly between the attached
+** connections.)^  In other words, if none of the pager caches associated
+** with the database connection are shared, this request returns the same
+** value as DBSTATUS_CACHE_USED. Or, if one or more or the pager caches are
+** shared, the value returned by this call will be smaller than that returned
+** by DBSTATUS_CACHE_USED. ^The highwater mark associated with
+** SQLITE_DBSTATUS_CACHE_USED_SHARED is always 0.
+**
 ** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
 ** <dd>This parameter returns the approximate number of bytes of heap
 ** memory used to store the schema for all databases associated
 ** with the connection - main, temp, and any [ATTACH]-ed databases.)^ 
 ** ^The full amount of memory used by the schemas is reported, even if the
 ** schema memory is shared with other database connections due to
 ** [shared cache mode] being enabled.
 ** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
 **
 ** [[SQLITE_DBSTATUS_STMT_USED]] ^(<dt>SQLITE_DBSTATUS_STMT_USED</dt>
@@ skipping 37 matching lines @@
 #define SQLITE_DBSTATUS_CACHE_USED           1
 #define SQLITE_DBSTATUS_SCHEMA_USED          2
 #define SQLITE_DBSTATUS_STMT_USED            3
 #define SQLITE_DBSTATUS_LOOKASIDE_HIT        4
 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE  5
 #define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL  6
 #define SQLITE_DBSTATUS_CACHE_HIT            7
 #define SQLITE_DBSTATUS_CACHE_MISS           8
 #define SQLITE_DBSTATUS_CACHE_WRITE          9
 #define SQLITE_DBSTATUS_DEFERRED_FKS        10
-#define SQLITE_DBSTATUS_MAX                 10   /* Largest defined DBSTATUS */
+#define SQLITE_DBSTATUS_CACHE_USED_SHARED   11
+#define SQLITE_DBSTATUS_MAX                 11   /* Largest defined DBSTATUS */
 
 
 /*
 ** CAPI3REF: Prepared Statement Status
 ** METHOD: sqlite3_stmt
 **
 ** ^(Each prepared statement maintains various
 ** [SQLITE_STMTSTATUS counters] that measure the number
 ** of times it has performed specific operations.)^  These counters can
 ** be used to monitor the performance characteristics of the prepared
 ** statements.  For example, if the number of table steps greatly exceeds
 ** the number of table searches or result rows, that would tend to indicate
 ** that the prepared statement is using a full table scan rather than
 ** an index.  
 **
 ** ^(This interface is used to retrieve and reset counter values from
 ** a [prepared statement].  The first argument is the prepared statement
 ** object to be interrogated.  The second argument
 ** is an integer code for a specific [SQLITE_STMTSTATUS counter]
 ** to be interrogated.)^
 ** ^The current value of the requested counter is returned.
 ** ^If the resetFlg is true, then the counter is reset to zero after this
 ** interface call returns.
 **
 ** See also: [sqlite3_status()] and [sqlite3_db_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for prepared statements
 ** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters}
 **
 ** These preprocessor macros define integer codes that name counter
 ** values associated with the [sqlite3_stmt_status()] interface.
 ** The meanings of the various counters are as follows:
 **
 ** <dl>
@@ skipping 306 matching lines @@
 ** ^The database name is "main" for the main database, "temp" for the
 ** temporary database, or the name specified after the AS keyword in
 ** an [ATTACH] statement for an attached database.
 ** ^The S and M arguments passed to 
 ** sqlite3_backup_init(D,N,S,M) identify the [database connection]
 ** and database name of the source database, respectively.
 ** ^The source and destination [database connections] (parameters S and D)
 ** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
 ** an error.
 **
-** ^A call to sqlite3_backup_init() will fail, returning SQLITE_ERROR, if 
+** ^A call to sqlite3_backup_init() will fail, returning NULL, if 
 ** there is already a read or read-write transaction open on the 
 ** destination database.
 **
 ** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
 ** returned and an error code and error message are stored in the
 ** destination [database connection] D.
 ** ^The error code and message for the failed call to sqlite3_backup_init()
 ** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or
 ** [sqlite3_errmsg16()] functions.
 ** ^A successful call to sqlite3_backup_init() returns a pointer to an
@@ skipping 121 matching lines @@
 ** backed up to is not accessed by any connection within the process,
 ** not just the specific connection that was passed to sqlite3_backup_init().
 **
 ** The [sqlite3_backup] object itself is partially threadsafe. Multiple 
 ** threads may safely make multiple concurrent calls to sqlite3_backup_step().
 ** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount()
 ** APIs are not strictly speaking threadsafe. If they are invoked at the
 ** same time as another thread is invoking sqlite3_backup_step() it is
 ** possible that they return invalid values.
 */
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
   sqlite3 *pDest,                        /* Destination database handle */
   const char *zDestName,                 /* Destination database name */
   sqlite3 *pSource,                      /* Source database handle */
   const char *zSourceName                /* Source database name */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
 
 /*
 ** CAPI3REF: Unlock Notification
 ** METHOD: sqlite3
 **
 ** ^When running in shared-cache mode, a database operation may fail with
 ** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
 ** individual tables within the shared-cache cannot be obtained. See
 ** [SQLite Shared-Cache Mode] for a description of shared-cache locking. 
 ** ^This API may be used to register a callback that SQLite will invoke 
@@ skipping 96 matching lines @@
 ** sqlite3_unlock_notify() results in the unlock-notify callback being
 ** invoked immediately. If the application then re-attempts the "DROP TABLE"
 ** or "DROP INDEX" query, an infinite loop might be the result.
 **
 ** One way around this problem is to check the extended error code returned
 ** by an sqlite3_step() call. ^(If there is a blocking connection, then the
 ** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
 ** the special "DROP TABLE/INDEX" case, the extended error code is just 
 ** SQLITE_LOCKED.)^
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
   sqlite3 *pBlocked,                          /* Waiting connection */
   void (*xNotify)(void **apArg, int nArg),    /* Callback function to invoke */
   void *pNotifyArg                            /* Argument to pass to xNotify */
 );
 
 
 /*
 ** CAPI3REF: String Comparison
 **
 ** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications
 ** and extensions to compare the contents of two buffers containing UTF-8
 ** strings in a case-independent fashion, using the same definition of "case
 ** independence" that SQLite uses internally when comparing identifiers.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
+SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
 
 /*
 ** CAPI3REF: String Globbing
 *
 ** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
 ** string X matches the [GLOB] pattern P.
 ** ^The definition of [GLOB] pattern matching used in
 ** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
 ** SQL dialect understood by SQLite.  ^The [sqlite3_strglob(P,X)] function
 ** is case sensitive.
 **
 ** Note that this routine returns zero on a match and non-zero if the strings
 ** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
 **
 ** See also: [sqlite3_strlike()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
 
 /* Begin WebDatabase patch for Chromium */
 /* Expose some SQLite internals for the WebDatabase vfs.
 ** DO NOT EXTEND THE USE OF THIS.
 */
 #ifndef CHROMIUM_SQLITE_API
 #define CHROMIUM_SQLITE_API SQLITE_API
 #endif
 #if defined(CHROMIUM_SQLITE_INTERNALS)
 #ifdef _WIN32
@@ skipping 25 matching lines @@
 ** one another.
 **
 ** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
 ** only ASCII characters are case folded.
 **
 ** Note that this routine returns zero on a match and non-zero if the strings
 ** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
 **
 ** See also: [sqlite3_strglob()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
+SQLITE_API int sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
 
 /*
 ** CAPI3REF: Error Logging Interface
 **
 ** ^The [sqlite3_log()] interface writes a message into the [error log]
 ** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
 ** ^If logging is enabled, the zFormat string and subsequent arguments are
 ** used with [sqlite3_snprintf()] to generate the final output string.
 **
 ** The sqlite3_log() interface is intended for use by extensions such as
 ** virtual tables, collating functions, and SQL functions.  While there is
 ** nothing to prevent an application from calling sqlite3_log(), doing so
 ** is considered bad form.
 **
 ** The zFormat string must not be NULL.
 **
 ** To avoid deadlocks and other threading problems, the sqlite3_log() routine
 ** will not use dynamically allocated memory.  The log message is stored in
 ** a fixed-length buffer on the stack.  If the log message is longer than
 ** a few hundred characters, it will be truncated to the length of the
 ** buffer.
 */
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
 
 /*
 ** CAPI3REF: Write-Ahead Log Commit Hook
 ** METHOD: sqlite3
 **
 ** ^The [sqlite3_wal_hook()] function is used to register a callback that
 ** is invoked each time data is committed to a database in wal mode.
 **
 ** ^(The callback is invoked by SQLite after the commit has taken place and 
 ** the associated write-lock on the database released)^, so the implementation 
@@ skipping 13 matching lines @@
 ** to report an error, though the commit will have still occurred. If the
 ** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value
 ** that does not correspond to any valid SQLite error code, the results
 ** are undefined.
 **
 ** A single database handle may have at most a single write-ahead log callback 
 ** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any
 ** previously registered write-ahead log callback. ^Note that the
 ** [sqlite3_wal_autocheckpoint()] interface and the
 ** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
-** those overwrite any prior [sqlite3_wal_hook()] settings.
+** overwrite any prior [sqlite3_wal_hook()] settings.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
   sqlite3*, 
   int(*)(void *,sqlite3*,const char*,int),
   void*
 );
 
 /*
 ** CAPI3REF: Configure an auto-checkpoint
 ** METHOD: sqlite3
 **
 ** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around
@@ skipping 14 matching lines @@
 **
 ** ^Checkpoints initiated by this mechanism are
 ** [sqlite3_wal_checkpoint_v2|PASSIVE].
 **
 ** ^Every new [database connection] defaults to having the auto-checkpoint
 ** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
 ** pages.  The use of this interface
 ** is only necessary if the default setting is found to be suboptimal
 ** for a particular application.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 
 /*
 ** CAPI3REF: Checkpoint a database
 ** METHOD: sqlite3
 **
 ** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to
 ** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^
 **
 ** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the 
 ** [write-ahead log] for database X on [database connection] D to be
 ** transferred into the database file and for the write-ahead log to
 ** be reset.  See the [checkpointing] documentation for addition
 ** information.
 **
 ** This interface used to be the only way to cause a checkpoint to
 ** occur.  But then the newer and more powerful [sqlite3_wal_checkpoint_v2()]
 ** interface was added.  This interface is retained for backwards
 ** compatibility and as a convenience for applications that need to manually
 ** start a callback but which do not need the full power (and corresponding
 ** complication) of [sqlite3_wal_checkpoint_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 
 /*
 ** CAPI3REF: Checkpoint a database
 ** METHOD: sqlite3
 **
 ** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint
 ** operation on database X of [database connection] D in mode M.  Status
 ** information is written back into integers pointed to by L and C.)^
 ** ^(The M parameter must be a valid [checkpoint mode]:)^
 **
@@ skipping 73 matching lines @@
 ** attached database, SQLITE_ERROR is returned to the caller.
 **
 ** ^Unless it returns SQLITE_MISUSE,
 ** the sqlite3_wal_checkpoint_v2() interface
 ** sets the error information that is queried by
 ** [sqlite3_errcode()] and [sqlite3_errmsg()].
 **
 ** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
 ** from SQL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
   sqlite3 *db,                    /* Database handle */
   const char *zDb,                /* Name of attached database (or NULL) */
   int eMode,                      /* SQLITE_CHECKPOINT_* value */
   int *pnLog,                     /* OUT: Size of WAL log in frames */
   int *pnCkpt                     /* OUT: Total number of frames checkpointed */
 );
 
 /*
 ** CAPI3REF: Checkpoint Mode Values
 ** KEYWORDS: {checkpoint mode}
@@ skipping 15 matching lines @@
 ** of a [virtual table] implementation to configure
 ** various facets of the virtual table interface.
 **
 ** If this interface is invoked outside the context of an xConnect or
 ** xCreate virtual table method then the behavior is undefined.
 **
 ** At present, there is only one option that may be configured using
 ** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].)  Further options
 ** may be added in the future.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Virtual Table Configuration Options
 **
 ** These macros define the various options to the
 ** [sqlite3_vtab_config()] interface that [virtual table] implementations
 ** can use to customize and optimize their behavior.
 **
 ** <dl>
 ** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT
@@ skipping 32 matching lines @@
 /*
 ** CAPI3REF: Determine The Virtual Table Conflict Policy
 **
 ** This function may only be called from within a call to the [xUpdate] method
 ** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The
 ** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL],
 ** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode
 ** of the SQL statement that triggered the call to the [xUpdate] method of the
 ** [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
 
 /*
 ** CAPI3REF: Conflict resolution modes
 ** KEYWORDS: {conflict resolution mode}
 **
 ** These constants are returned by [sqlite3_vtab_on_conflict()] to
 ** inform a [virtual table] implementation what the [ON CONFLICT] mode
 ** is for the SQL statement being evaluated.
 **
 ** Note that the [SQLITE_IGNORE] constant is also used as a potential
@@ skipping 84 matching lines @@
 ** the statement - a non-zero value is returned and the variable that pOut
 ** points to is unchanged.
 **
 ** ^Statistics might not be available for all loops in all statements. ^In cases
 ** where there exist loops with no available statistics, this function behaves
 ** as if the loop did not exist - it returns non-zero and leave the variable
 ** that pOut points to unchanged.
 **
 ** See also: [sqlite3_stmt_scanstatus_reset()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
   sqlite3_stmt *pStmt,      /* Prepared statement for which info desired */
   int idx,                  /* Index of loop to report on */
   int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
   void *pOut                /* Result written here */
 );     
 
 /*
 ** CAPI3REF: Zero Scan-Status Counters
 ** METHOD: sqlite3_stmt
 **
 ** ^Zero all [sqlite3_stmt_scanstatus()] related event counters.
 **
 ** This API is only available if the library is built with pre-processor
 ** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Flush caches to disk mid-transaction
 **
 ** ^If a write-transaction is open on [database connection] D when the
 ** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
 ** pages in the pager-cache that are not currently in use are written out 
 ** to disk. A dirty page may be in use if a database cursor created by an
 ** active SQL statement is reading from it, or if it is page 1 of a database
 ** file (page 1 is always "in use").  ^The [sqlite3_db_cacheflush(D)]
@@ skipping 11 matching lines @@
 **
 ** ^If any other error occurs while flushing dirty pages to disk (for
 ** example an IO error or out-of-memory condition), then processing is
 ** abandoned and an SQLite [error code] is returned to the caller immediately.
 **
 ** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
 **
 ** ^This function does not set the database handle error code or message
 ** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3*);
+SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
+
+/*
+** CAPI3REF: The pre-update hook.
+**
+** ^These interfaces are only available if SQLite is compiled using the
+** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option.
+**
+** ^The [sqlite3_preupdate_hook()] interface registers a callback function
+** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation
+** on a database table.
+** ^At most one preupdate hook may be registered at a time on a single
+** [database connection]; each call to [sqlite3_preupdate_hook()] overrides
+** the previous setting.
+** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()]
+** with a NULL pointer as the second parameter.
+** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as
+** the first parameter to callbacks.
+**
+** ^The preupdate hook only fires for changes to real database tables; the
+** preupdate hook is not invoked for changes to [virtual tables] or to
+** system tables like sqlite_master or sqlite_stat1.
+**
+** ^The second parameter to the preupdate callback is a pointer to
+** the [database connection] that registered the preupdate hook.
+** ^The third parameter to the preupdate callback is one of the constants
+** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to identify the
+** kind of update operation that is about to occur.
+** ^(The fourth parameter to the preupdate callback is the name of the
+** database within the database connection that is being modified.  This
+** will be "main" for the main database or "temp" for TEMP tables or 
+** the name given after the AS keyword in the [ATTACH] statement for attached
+** databases.)^
+** ^The fifth parameter to the preupdate callback is the name of the
+** table that is being modified.
+**
+** For an UPDATE or DELETE operation on a [rowid table], the sixth
+** parameter passed to the preupdate callback is the initial [rowid] of the 
+** row being modified or deleted. For an INSERT operation on a rowid table,
+** or any operation on a WITHOUT ROWID table, the value of the sixth 
+** parameter is undefined. For an INSERT or UPDATE on a rowid table the
+** seventh parameter is the final rowid value of the row being inserted
+** or updated. The value of the seventh parameter passed to the callback
+** function is not defined for operations on WITHOUT ROWID tables, or for
+** INSERT operations on rowid tables.
+**
+** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
+** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
+** provide additional information about a preupdate event. These routines
+** may only be called from within a preupdate callback.  Invoking any of
+** these routines from outside of a preupdate callback or with a
+** [database connection] pointer that is different from the one supplied
+** to the preupdate callback results in undefined and probably undesirable
+** behavior.
+**
+** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns
+** in the row that is being inserted, updated, or deleted.
+**
+** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row before it is updated.  The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE
+** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the
+** behavior is undefined.  The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row after it is updated.  The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE
+** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the
+** behavior is undefined.  The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
+** callback was invoked as a result of a direct insert, update, or delete
+** operation; or 1 for inserts, updates, or deletes invoked by top-level 
+** triggers; or 2 for changes resulting from triggers called by top-level
+** triggers; and so forth.
+**
+** See also:  [sqlite3_update_hook()]
+*/
+#if defined(SQLITE_ENABLE_PREUPDATE_HOOK)
+SQLITE_API void *sqlite3_preupdate_hook(
+  sqlite3 *db,
+  void(*xPreUpdate)(
+    void *pCtx,                   /* Copy of third arg to preupdate_hook() */
+    sqlite3 *db,                  /* Database handle */
+    int op,                       /* SQLITE_UPDATE, DELETE or INSERT */
+    char const *zDb,              /* Database name */
+    char const *zName,            /* Table name */
+    sqlite3_int64 iKey1,          /* Rowid of row about to be deleted/updated */
+    sqlite3_int64 iKey2           /* New rowid value (for a rowid UPDATE) */
+  ),
+  void*
+);
+SQLITE_API int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
+SQLITE_API int sqlite3_preupdate_count(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_depth(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
+#endif
+
+/*
+** CAPI3REF: Low-level system error code
+**
+** ^Attempt to return the underlying operating system error code or error
+** number that caused the most recent I/O error or failure to open a file.
+** The return value is OS-dependent.  For example, on unix systems, after
+** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
+** called to get back the underlying "errno" that caused the problem, such
+** as ENOSPC, EAUTH, EISDIR, and so forth.  
+*/
+SQLITE_API int sqlite3_system_errno(sqlite3*);
 
 /*
 ** CAPI3REF: Database Snapshot
-** KEYWORDS: {snapshot}
+** KEYWORDS: {snapshot} {sqlite3_snapshot}
 ** EXPERIMENTAL
 **
 ** An instance of the snapshot object records the state of a [WAL mode]
 ** database for some specific point in history.
 **
 ** In [WAL mode], multiple [database connections] that are open on the
 ** same database file can each be reading a different historical version
 ** of the database file.  When a [database connection] begins a read
 ** transaction, that connection sees an unchanging copy of the database
 ** as it existed for the point in time when the transaction first started.
 ** Subsequent changes to the database from other connections are not seen
 ** by the reader until a new read transaction is started.
 **
 ** The sqlite3_snapshot object records state information about an historical
 ** version of the database file so that it is possible to later open a new read
 ** transaction that sees that historical version of the database rather than
 ** the most recent version.
 **
 ** The constructor for this object is [sqlite3_snapshot_get()].  The
 ** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
 ** to an historical snapshot (if possible).  The destructor for 
 ** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
 */
-typedef struct sqlite3_snapshot sqlite3_snapshot;
+typedef struct sqlite3_snapshot {
+  unsigned char hidden[48];
+} sqlite3_snapshot;
 
 /*
 ** CAPI3REF: Record A Database Snapshot
 ** EXPERIMENTAL
 **
 ** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
 ** new [sqlite3_snapshot] object that records the current state of
 ** schema S in database connection D.  ^On success, the
 ** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
 ** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
-** ^If schema S of [database connection] D is not a [WAL mode] database
-** that is in a read transaction, then [sqlite3_snapshot_get(D,S,P)]
-** leaves the *P value unchanged and returns an appropriate [error code].
+** If there is not already a read-transaction open on schema S when
+** this function is called, one is opened automatically. 
+**
+** The following must be true for this function to succeed. If any of
+** the following statements are false when sqlite3_snapshot_get() is
+** called, SQLITE_ERROR is returned. The final value of *P is undefined
+** in this case. 
+**
+** <ul>
+**   <li> The database handle must be in [autocommit mode].
+**
+**   <li> Schema S of [database connection] D must be a [WAL mode] database.
+**
+**   <li> There must not be a write transaction open on schema S of database
+**        connection D.
+**
+**   <li> One or more transactions must have been written to the current wal
+**        file since it was created on disk (by any connection). This means
+**        that a snapshot cannot be taken on a wal mode database with no wal 
+**        file immediately after it is first opened. At least one transaction
+**        must be written to it first.
+** </ul>
+**
+** This function may also return SQLITE_NOMEM.  If it is called with the
+** database handle in autocommit mode but fails for some other reason, 
+** whether or not a read transaction is opened on schema S is undefined.
 **
 ** The [sqlite3_snapshot] object returned from a successful call to
 ** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
 ** to avoid a memory leak.
 **
 ** The [sqlite3_snapshot_get()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_get(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
   sqlite3 *db,
   const char *zSchema,
   sqlite3_snapshot **ppSnapshot
 );
 
 /*
 ** CAPI3REF: Start a read transaction on an historical snapshot
 ** EXPERIMENTAL
 **
-** ^The [sqlite3_snapshot_open(D,S,P)] interface attempts to move the
-** read transaction that is currently open on schema S of
-** [database connection] D so that it refers to historical [snapshot] P.
+** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
+** read transaction for schema S of
+** [database connection] D such that the read transaction
+** refers to historical [snapshot] P, rather than the most
+** recent change to the database.
 ** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
 ** or an appropriate [error code] if it fails.
 **
 ** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
-** the first operation, apart from other sqlite3_snapshot_open() calls,
-** following the [BEGIN] that starts a new read transaction.
-** ^A [snapshot] will fail to open if it has been overwritten by a 
-** [checkpoint].  
+** the first operation following the [BEGIN] that takes the schema S
+** out of [autocommit mode].
+** ^In other words, schema S must not currently be in
+** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
+** database connection D must be out of [autocommit mode].
+** ^A [snapshot] will fail to open if it has been overwritten by a
+** [checkpoint].
+** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
+** database connection D does not know that the database file for
+** schema S is in [WAL mode].  A database connection might not know
+** that the database file is in [WAL mode] if there has been no prior
+** I/O on that database connection, or if the database entered [WAL mode] 
+** after the most recent I/O on the database connection.)^
+** (Hint: Run "[PRAGMA application_id]" against a newly opened
+** database connection in order to make it ready to use snapshots.)
 **
 ** The [sqlite3_snapshot_open()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_open(
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
   sqlite3 *db,
   const char *zSchema,
   sqlite3_snapshot *pSnapshot
 );
 
 /*
 ** CAPI3REF: Destroy a snapshot
 ** EXPERIMENTAL
 **
 ** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
 ** The application must eventually free every [sqlite3_snapshot] object
 ** using this routine to avoid a memory leak.
 **
 ** The [sqlite3_snapshot_free()] interface is only available when the
 ** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
 */
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot*);
+SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
+
+/*
+** CAPI3REF: Compare the ages of two snapshot handles.
+** EXPERIMENTAL
+**
+** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
+** of two valid snapshot handles. 
+**
+** If the two snapshot handles are not associated with the same database 
+** file, the result of the comparison is undefined. 
+**
+** Additionally, the result of the comparison is only valid if both of the
+** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
+** last time the wal file was deleted. The wal file is deleted when the
+** database is changed back to rollback mode or when the number of database
+** clients drops to zero. If either snapshot handle was obtained before the 
+** wal file was last deleted, the value returned by this function 
+** is undefined.
+**
+** Otherwise, this API returns a negative value if P1 refers to an older
+** snapshot than P2, zero if the two handles refer to the same database
+** snapshot, and a positive value if P1 is a newer snapshot than P2.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
+  sqlite3_snapshot *p1,
+  sqlite3_snapshot *p2
+);
+
+/*
+** CAPI3REF: Recover snapshots from a wal file
+** EXPERIMENTAL
+**
+** If all connections disconnect from a database file but do not perform
+** a checkpoint, the existing wal file is opened along with the database
+** file the next time the database is opened. At this point it is only
+** possible to successfully call sqlite3_snapshot_open() to open the most
+** recent snapshot of the database (the one at the head of the wal file),
+** even though the wal file may contain other valid snapshots for which
+** clients have sqlite3_snapshot handles.
+**
+** This function attempts to scan the wal file associated with database zDb
+** of database handle db and make all valid snapshots available to
+** sqlite3_snapshot_open(). It is an error if there is already a read
+** transaction open on the database, or if the database is not a wal mode
+** database.
+**
+** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb);
 
 /*
 ** Undo the hack that converts floating point types to integer for
 ** builds on processors without floating point support.
 */
 #ifdef SQLITE_OMIT_FLOATING_POINT
 # undef double
 #endif
 
 #ifdef __cplusplus
 }  /* End of the 'extern "C"' block */
 #endif
-#endif /* _SQLITE3_H_ */
+#endif /* SQLITE3_H */
 
+/******** Begin file sqlite3rtree.h *********/
 /*
 ** 2010 August 30
 **
 ** The author disclaims copyright to this source code.  In place of
 ** a legal notice, here is a blessing:
 **
 **    May you do good and not evil.
 **    May you find forgiveness for yourself and forgive others.
 **    May you share freely, never taking more than you give.
 **
@@ skipping 19 matching lines @@
 #else
   typedef double sqlite3_rtree_dbl;
 #endif
 
 /*
 ** Register a geometry callback named zGeom that can be used as part of an
 ** R-Tree geometry query as follows:
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,
   const char *zGeom,
   int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
   void *pContext
 );
 
 
 /*
 ** A pointer to a structure of the following type is passed as the first
 ** argument to callbacks registered using rtree_geometry_callback().
 */
 struct sqlite3_rtree_geometry {
   void *pContext;                 /* Copy of pContext passed to s_r_g_c() */
   int nParam;                     /* Size of array aParam[] */
   sqlite3_rtree_dbl *aParam;      /* Parameters passed to SQL geom function */
   void *pUser;                    /* Callback implementation user data */
   void (*xDelUser)(void *);       /* Called by SQLite to clean up pUser */
 };
 
 /*
 ** Register a 2nd-generation geometry callback named zScore that can be 
 ** used as part of an R-Tree geometry query as follows:
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
   sqlite3 *db,
   const char *zQueryFunc,
   int (*xQueryFunc)(sqlite3_rtree_query_info*),
   void *pContext,
   void (*xDestructor)(void*)
 );
 
 
 /*
 ** A pointer to a structure of the following type is passed as the 
@@ skipping 31 matching lines @@
 #define PARTLY_WITHIN    1   /* Object partially overlaps query region */
 #define FULLY_WITHIN     2   /* Object fully contained within query region */
 
 
 #ifdef __cplusplus
 }  /* end of the 'extern "C"' block */
 #endif
 
 #endif  /* ifndef _SQLITE3RTREE_H_ */
 
+/******** End of sqlite3rtree.h *********/
+/******** Begin file sqlite3session.h *********/
+
+#if !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION)
+#define __SQLITESESSION_H_ 1
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+** CAPI3REF: Session Object Handle
+*/
+typedef struct sqlite3_session sqlite3_session;
+
+/*
+** CAPI3REF: Changeset Iterator Handle
+*/
+typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
+
+/*
+** CAPI3REF: Create A New Session Object
+**
+** Create a new session object attached to database handle db. If successful,
+** a pointer to the new object is written to *ppSession and SQLITE_OK is
+** returned. If an error occurs, *ppSession is set to NULL and an SQLite
+** error code (e.g. SQLITE_NOMEM) is returned.
+**
+** It is possible to create multiple session objects attached to a single
+** database handle.
+**
+** Session objects created using this function should be deleted using the
+** [sqlite3session_delete()] function before the database handle that they
+** are attached to is itself closed. If the database handle is closed before
+** the session object is deleted, then the results of calling any session
+** module function, including [sqlite3session_delete()] on the session object
+** are undefined.
+**
+** Because the session module uses the [sqlite3_preupdate_hook()] API, it
+** is not possible for an application to register a pre-update hook on a
+** database handle that has one or more session objects attached. Nor is
+** it possible to create a session object attached to a database handle for
+** which a pre-update hook is already defined. The results of attempting 
+** either of these things are undefined.
+**
+** The session object will be used to create changesets for tables in
+** database zDb, where zDb is either "main", or "temp", or the name of an
+** attached database. It is not an error if database zDb is not attached
+** to the database when the session object is created.
+*/
+SQLITE_API int sqlite3session_create(
+  sqlite3 *db,                    /* Database handle */
+  const char *zDb,                /* Name of db (e.g. "main") */
+  sqlite3_session **ppSession     /* OUT: New session object */
+);
+
+/*
+** CAPI3REF: Delete A Session Object
+**
+** Delete a session object previously allocated using 
+** [sqlite3session_create()]. Once a session object has been deleted, the
+** results of attempting to use pSession with any other session module
+** function are undefined.
+**
+** Session objects must be deleted before the database handle to which they
+** are attached is closed. Refer to the documentation for 
+** [sqlite3session_create()] for details.
+*/
+SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
+
+
+/*
+** CAPI3REF: Enable Or Disable A Session Object
+**
+** Enable or disable the recording of changes by a session object. When
+** enabled, a session object records changes made to the database. When
+** disabled - it does not. A newly created session object is enabled.
+** Refer to the documentation for [sqlite3session_changeset()] for further
+** details regarding how enabling and disabling a session object affects
+** the eventual changesets.
+**
+** Passing zero to this function disables the session. Passing a value
+** greater than zero enables it. Passing a value less than zero is a 
+** no-op, and may be used to query the current state of the session.
+**
+** The return value indicates the final state of the session object: 0 if 
+** the session is disabled, or 1 if it is enabled.
+*/
+SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
+
+/*
+** CAPI3REF: Set Or Clear the Indirect Change Flag
+**
+** Each change recorded by a session object is marked as either direct or
+** indirect. A change is marked as indirect if either:
+**
+** <ul>
+**   <li> The session object "indirect" flag is set when the change is
+**        made, or
+**   <li> The change is made by an SQL trigger or foreign key action 
+**        instead of directly as a result of a users SQL statement.
+** </ul>
+**
+** If a single row is affected by more than one operation within a session,
+** then the change is considered indirect if all operations meet the criteria
+** for an indirect change above, or direct otherwise.
+**
+** This function is used to set, clear or query the session object indirect
+** flag.  If the second argument passed to this function is zero, then the
+** indirect flag is cleared. If it is greater than zero, the indirect flag
+** is set. Passing a value less than zero does not modify the current value
+** of the indirect flag, and may be used to query the current state of the 
+** indirect flag for the specified session object.
+**
+** The return value indicates the final state of the indirect flag: 0 if 
+** it is clear, or 1 if it is set.
+*/
+SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
+
+/*
+** CAPI3REF: Attach A Table To A Session Object
+**
+** If argument zTab is not NULL, then it is the name of a table to attach
+** to the session object passed as the first argument. All subsequent changes 
+** made to the table while the session object is enabled will be recorded. See 
+** documentation for [sqlite3session_changeset()] for further details.
+**
+** Or, if argument zTab is NULL, then changes are recorded for all tables
+** in the database. If additional tables are added to the database (by 
+** executing "CREATE TABLE" statements) after this call is made, changes for 
+** the new tables are also recorded.
+**
+** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
+** defined as part of their CREATE TABLE statement. It does not matter if the 
+** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
+** KEY may consist of a single column, or may be a composite key.
+** 
+** It is not an error if the named table does not exist in the database. Nor
+** is it an error if the named table does not have a PRIMARY KEY. However,
+** no changes will be recorded in either of these scenarios.
+**
+** Changes are not recorded for individual rows that have NULL values stored
+** in one or more of their PRIMARY KEY columns.
+**
+** SQLITE_OK is returned if the call completes without error. Or, if an error 
+** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+*/
+SQLITE_API int sqlite3session_attach(
+  sqlite3_session *pSession,      /* Session object */
+  const char *zTab                /* Table name */
+);
+
+/*
+** CAPI3REF: Set a table filter on a Session Object.
+**
+** The second argument (xFilter) is the "filter callback". For changes to rows 
+** in tables that are not attached to the Session object, the filter is called
+** to determine whether changes to the table's rows should be tracked or not. 
+** If xFilter returns 0, changes is not tracked. Note that once a table is 
+** attached, xFilter will not be called again.
+*/
+SQLITE_API void sqlite3session_table_filter(
+  sqlite3_session *pSession,      /* Session object */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of third arg to _filter_table() */
+    const char *zTab              /* Table name */
+  ),
+  void *pCtx                      /* First argument passed to xFilter */
+);
+
+/*
+** CAPI3REF: Generate A Changeset From A Session Object
+**
+** Obtain a changeset containing changes to the tables attached to the 
+** session object passed as the first argument. If successful, 
+** set *ppChangeset to point to a buffer containing the changeset 
+** and *pnChangeset to the size of the changeset in bytes before returning
+** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
+** zero and return an SQLite error code.
+**
+** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes,
+** each representing a change to a single row of an attached table. An INSERT
+** change contains the values of each field of a new database row. A DELETE
+** contains the original values of each field of a deleted database row. An
+** UPDATE change contains the original values of each field of an updated
+** database row along with the updated values for each updated non-primary-key
+** column. It is not possible for an UPDATE change to represent a change that
+** modifies the values of primary key columns. If such a change is made, it
+** is represented in a changeset as a DELETE followed by an INSERT.
+**
+** Changes are not recorded for rows that have NULL values stored in one or 
+** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
+** no corresponding change is present in the changesets returned by this
+** function. If an existing row with one or more NULL values stored in
+** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL,
+** only an INSERT is appears in the changeset. Similarly, if an existing row
+** with non-NULL PRIMARY KEY values is updated so that one or more of its
+** PRIMARY KEY columns are set to NULL, the resulting changeset contains a
+** DELETE change only.
+**
+** The contents of a changeset may be traversed using an iterator created
+** using the [sqlite3changeset_start()] API. A changeset may be applied to
+** a database with a compatible schema using the [sqlite3changeset_apply()]
+** API.
+**
+** Within a changeset generated by this function, all changes related to a
+** single table are grouped together. In other words, when iterating through
+** a changeset or when applying a changeset to a database, all changes related
+** to a single table are processed before moving on to the next table. Tables
+** are sorted in the same order in which they were attached (or auto-attached)
+** to the sqlite3_session object. The order in which the changes related to
+** a single table are stored is undefined.
+**
+** Following a successful call to this function, it is the responsibility of
+** the caller to eventually free the buffer that *ppChangeset points to using
+** [sqlite3_free()].
+**
+** <h3>Changeset Generation</h3>
+**
+** Once a table has been attached to a session object, the session object
+** records the primary key values of all new rows inserted into the table.
+** It also records the original primary key and other column values of any
+** deleted or updated rows. For each unique primary key value, data is only
+** recorded once - the first time a row with said primary key is inserted,
+** updated or deleted in the lifetime of the session.
+**
+** There is one exception to the previous paragraph: when a row is inserted,
+** updated or deleted, if one or more of its primary key columns contain a
+** NULL value, no record of the change is made.
+**
+** The session object therefore accumulates two types of records - those
+** that consist of primary key values only (created when the user inserts
+** a new record) and those that consist of the primary key values and the
+** original values of other table columns (created when the users deletes
+** or updates a record).
+**
+** When this function is called, the requested changeset is created using
+** both the accumulated records and the current contents of the database
+** file. Specifically:
+**
+** <ul>
+**   <li> For each record generated by an insert, the database is queried
+**        for a row with a matching primary key. If one is found, an INSERT
+**        change is added to the changeset. If no such row is found, no change 
+**        is added to the changeset.
+**
+**   <li> For each record generated by an update or delete, the database is 
+**        queried for a row with a matching primary key. If such a row is
+**        found and one or more of the non-primary key fields have been
+**        modified from their original values, an UPDATE change is added to 
+**        the changeset. Or, if no such row is found in the table, a DELETE 
+**        change is added to the changeset. If there is a row with a matching
+**        primary key in the database, but all fields contain their original
+**        values, no change is added to the changeset.
+** </ul>
+**
+** This means, amongst other things, that if a row is inserted and then later
+** deleted while a session object is active, neither the insert nor the delete
+** will be present in the changeset. Or if a row is deleted and then later a 
+** row with the same primary key values inserted while a session object is
+** active, the resulting changeset will contain an UPDATE change instead of
+** a DELETE and an INSERT.
+**
+** When a session object is disabled (see the [sqlite3session_enable()] API),
+** it does not accumulate records when rows are inserted, updated or deleted.
+** This may appear to have some counter-intuitive effects if a single row
+** is written to more than once during a session. For example, if a row
+** is inserted while a session object is enabled, then later deleted while 
+** the same session object is disabled, no INSERT record will appear in the
+** changeset, even though the delete took place while the session was disabled.
+** Or, if one field of a row is updated while a session is disabled, and 
+** another field of the same row is updated while the session is enabled, the
+** resulting changeset will contain an UPDATE change that updates both fields.
+*/
+SQLITE_API int sqlite3session_changeset(
+  sqlite3_session *pSession,      /* Session object */
+  int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
+  void **ppChangeset              /* OUT: Buffer containing changeset */
+);
+
+/*
+** CAPI3REF: Load The Difference Between Tables Into A Session 
+**
+** If it is not already attached to the session object passed as the first
+** argument, this function attaches table zTbl in the same manner as the
+** [sqlite3session_attach()] function. If zTbl does not exist, or if it
+** does not have a primary key, this function is a no-op (but does not return
+** an error).
+**
+** Argument zFromDb must be the name of a database ("main", "temp" etc.)
+** attached to the same database handle as the session object that contains 
+** a table compatible with the table attached to the session by this function.
+** A table is considered compatible if it:
+**
+** <ul>
+**   <li> Has the same name,
+**   <li> Has the same set of columns declared in the same order, and
+**   <li> Has the same PRIMARY KEY definition.
+** </ul>
+**
+** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables
+** are compatible but do not have any PRIMARY KEY columns, it is not an error
+** but no changes are added to the session object. As with other session
+** APIs, tables without PRIMARY KEYs are simply ignored.
+**
+** This function adds a set of changes to the session object that could be
+** used to update the table in database zFrom (call this the "from-table") 
+** so that its content is the same as the table attached to the session 
+** object (call this the "to-table"). Specifically:
+**
+** <ul>
+**   <li> For each row (primary key) that exists in the to-table but not in 
+**     the from-table, an INSERT record is added to the session object.
+**
+**   <li> For each row (primary key) that exists in the to-table but not in 
+**     the from-table, a DELETE record is added to the session object.
+**
+**   <li> For each row (primary key) that exists in both tables, but features 
+**     different non-PK values in each, an UPDATE record is added to the
+**     session.  
+** </ul>
+**
+** To clarify, if this function is called and then a changeset constructed
+** using [sqlite3session_changeset()], then after applying that changeset to 
+** database zFrom the contents of the two compatible tables would be 
+** identical.
+**
+** It an error if database zFrom does not exist or does not contain the
+** required compatible table.
+**
+** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
+** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
+** may be set to point to a buffer containing an English language error 
+** message. It is the responsibility of the caller to free this buffer using
+** sqlite3_free().
+*/
+SQLITE_API int sqlite3session_diff(
+  sqlite3_session *pSession,
+  const char *zFromDb,
+  const char *zTbl,
+  char **pzErrMsg
+);
+
+
+/*
+** CAPI3REF: Generate A Patchset From A Session Object
+**
+** The differences between a patchset and a changeset are that:
+**
+** <ul>
+**   <li> DELETE records consist of the primary key fields only. The 
+**        original values of other fields are omitted.
+**   <li> The original values of any modified fields are omitted from 
+**        UPDATE records.
+** </ul>
+**
+** A patchset blob may be used with up to date versions of all 
+** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(), 
+** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
+** attempting to use a patchset blob with old versions of the
+** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error. 
+**
+** Because the non-primary key "old.*" fields are omitted, no 
+** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
+** is passed to the sqlite3changeset_apply() API. Other conflict types work
+** in the same way as for changesets.
+**
+** Changes within a patchset are ordered in the same way as for changesets
+** generated by the sqlite3session_changeset() function (i.e. all changes for
+** a single table are grouped together, tables appear in the order in which
+** they were attached to the session object).
+*/
+SQLITE_API int sqlite3session_patchset(
+  sqlite3_session *pSession,      /* Session object */
+  int *pnPatchset,                /* OUT: Size of buffer at *ppChangeset */
+  void **ppPatchset               /* OUT: Buffer containing changeset */
+);
+
+/*
+** CAPI3REF: Test if a changeset has recorded any changes.
+**
+** Return non-zero if no changes to attached tables have been recorded by 
+** the session object passed as the first argument. Otherwise, if one or 
+** more changes have been recorded, return zero.
+**
+** Even if this function returns zero, it is possible that calling
+** [sqlite3session_changeset()] on the session handle may still return a
+** changeset that contains no changes. This can happen when a row in 
+** an attached table is modified and then later on the original values 
+** are restored. However, if this function returns non-zero, then it is
+** guaranteed that a call to sqlite3session_changeset() will return a 
+** changeset containing zero changes.
+*/
+SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
+
+/*
+** CAPI3REF: Create An Iterator To Traverse A Changeset 
+**
+** Create an iterator used to iterate through the contents of a changeset.
+** If successful, *pp is set to point to the iterator handle and SQLITE_OK
+** is returned. Otherwise, if an error occurs, *pp is set to zero and an
+** SQLite error code is returned.
+**
+** The following functions can be used to advance and query a changeset 
+** iterator created by this function:
+**
+** <ul>
+**   <li> [sqlite3changeset_next()]
+**   <li> [sqlite3changeset_op()]
+**   <li> [sqlite3changeset_new()]
+**   <li> [sqlite3changeset_old()]
+** </ul>
+**
+** It is the responsibility of the caller to eventually destroy the iterator
+** by passing it to [sqlite3changeset_finalize()]. The buffer containing the
+** changeset (pChangeset) must remain valid until after the iterator is
+** destroyed.
+**
+** Assuming the changeset blob was created by one of the
+** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
+** [sqlite3changeset_invert()] functions, all changes within the changeset 
+** that apply to a single table are grouped together. This means that when 
+** an application iterates through a changeset using an iterator created by 
+** this function, all changes that relate to a single table are visited 
+** consecutively. There is no chance that the iterator will visit a change 
+** the applies to table X, then one for table Y, and then later on visit 
+** another change for table X.
+*/
+SQLITE_API int sqlite3changeset_start(
+  sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
+  int nChangeset,                 /* Size of changeset blob in bytes */
+  void *pChangeset                /* Pointer to blob containing changeset */
+);
+
+
+/*
+** CAPI3REF: Advance A Changeset Iterator
+**
+** This function may only be used with iterators created by function
+** [sqlite3changeset_start()]. If it is called on an iterator passed to
+** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE
+** is returned and the call has no effect.
+**
+** Immediately after an iterator is created by sqlite3changeset_start(), it
+** does not point to any change in the changeset. Assuming the changeset
+** is not empty, the first call to this function advances the iterator to
+** point to the first change in the changeset. Each subsequent call advances
+** the iterator to point to the next change in the changeset (if any). If
+** no error occurs and the iterator points to a valid change after a call
+** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned. 
+** Otherwise, if all changes in the changeset have already been visited,
+** SQLITE_DONE is returned.
+**
+** If an error occurs, an SQLite error code is returned. Possible error 
+** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or 
+** SQLITE_NOMEM.
+*/
+SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this
+** is not the case, this function returns [SQLITE_MISUSE].
+**
+** If argument pzTab is not NULL, then *pzTab is set to point to a
+** nul-terminated utf-8 encoded string containing the name of the table
+** affected by the current change. The buffer remains valid until either
+** sqlite3changeset_next() is called on the iterator or until the 
+** conflict-handler function returns. If pnCol is not NULL, then *pnCol is 
+** set to the number of columns in the table affected by the change. If
+** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
+** is an indirect change, or false (0) otherwise. See the documentation for
+** [sqlite3session_indirect()] for a description of direct and indirect
+** changes. Finally, if pOp is not NULL, then *pOp is set to one of 
+** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the 
+** type of change that the iterator currently points to.
+**
+** If no error occurs, SQLITE_OK is returned. If an error does occur, an
+** SQLite error code is returned. The values of the output variables may not
+** be trusted in this case.
+*/
+SQLITE_API int sqlite3changeset_op(
+  sqlite3_changeset_iter *pIter,  /* Iterator object */
+  const char **pzTab,             /* OUT: Pointer to table name */
+  int *pnCol,                     /* OUT: Number of columns in table */
+  int *pOp,                       /* OUT: SQLITE_INSERT, DELETE or UPDATE */
+  int *pbIndirect                 /* OUT: True for an 'indirect' change */
+);
+
+/*
+** CAPI3REF: Obtain The Primary Key Definition Of A Table
+**
+** For each modified table, a changeset includes the following:
+**
+** <ul>
+**   <li> The number of columns in the table, and
+**   <li> Which of those columns make up the tables PRIMARY KEY.
+** </ul>
+**
+** This function is used to find which columns comprise the PRIMARY KEY of
+** the table modified by the change that iterator pIter currently points to.
+** If successful, *pabPK is set to point to an array of nCol entries, where
+** nCol is the number of columns in the table. Elements of *pabPK are set to
+** 0x01 if the corresponding column is part of the tables primary key, or
+** 0x00 if it is not.
+**
+** If argument pnCol is not NULL, then *pnCol is set to the number of columns
+** in the table.
+**
+** If this function is called when the iterator does not point to a valid
+** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise,
+** SQLITE_OK is returned and the output variables populated as described
+** above.
+*/
+SQLITE_API int sqlite3changeset_pk(
+  sqlite3_changeset_iter *pIter,  /* Iterator object */
+  unsigned char **pabPK,          /* OUT: Array of boolean - true for PK cols */
+  int *pnCol                      /* OUT: Number of entries in output array */
+);
+
+/*
+** CAPI3REF: Obtain old.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW. 
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of 
+** original row values stored as part of the UPDATE or DELETE change and
+** returns SQLITE_OK. The name of the function comes from the fact that this 
+** is similar to the "old.*" columns available to update or delete triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_old(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int iVal,                       /* Column number */
+  sqlite3_value **ppValue         /* OUT: Old value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain new.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW. 
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of 
+** new row values stored as part of the UPDATE or INSERT change and
+** returns SQLITE_OK. If the change is an UPDATE and does not include
+** a new value for the requested column, *ppValue is set to NULL and 
+** SQLITE_OK returned. The name of the function comes from the fact that 
+** this is similar to the "new.*" columns available to update or delete 
+** triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_new(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int iVal,                       /* Column number */
+  sqlite3_value **ppValue         /* OUT: New value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
+**
+** This function should only be used with iterator objects passed to a
+** conflict-handler callback by [sqlite3changeset_apply()] with either
+** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function
+** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue
+** is set to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the 
+** "conflicting row" associated with the current conflict-handler callback
+** and returns SQLITE_OK.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_conflict(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int iVal,                       /* Column number */
+  sqlite3_value **ppValue         /* OUT: Value from conflicting row */
+);
+
+/*
+** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
+**
+** This function may only be called with an iterator passed to an
+** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
+** it sets the output variable to the total number of known foreign key
+** violations in the destination database and returns SQLITE_OK.
+**
+** In all other cases this function returns SQLITE_MISUSE.
+*/
+SQLITE_API int sqlite3changeset_fk_conflicts(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int *pnOut                      /* OUT: Number of FK violations */
+);
+
+
+/*
+** CAPI3REF: Finalize A Changeset Iterator
+**
+** This function is used to finalize an iterator allocated with
+** [sqlite3changeset_start()].
+**
+** This function should only be called on iterators created using the
+** [sqlite3changeset_start()] function. If an application calls this
+** function with an iterator passed to a conflict-handler by
+** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the
+** call has no effect.
+**
+** If an error was encountered within a call to an sqlite3changeset_xxx()
+** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an 
+** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
+** to that error is returned by this function. Otherwise, SQLITE_OK is
+** returned. This is to allow the following pattern (pseudo-code):
+**
+**   sqlite3changeset_start();
+**   while( SQLITE_ROW==sqlite3changeset_next() ){
+**     // Do something with change.
+**   }
+**   rc = sqlite3changeset_finalize();
+**   if( rc!=SQLITE_OK ){
+**     // An error has occurred 
+**   }
+*/
+SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Invert A Changeset
+**
+** This function is used to "invert" a changeset object. Applying an inverted
+** changeset to a database reverses the effects of applying the uninverted
+** changeset. Specifically:
+**
+** <ul>
+**   <li> Each DELETE change is changed to an INSERT, and
+**   <li> Each INSERT change is changed to a DELETE, and
+**   <li> For each UPDATE change, the old.* and new.* values are exchanged.
+** </ul>
+**
+** This function does not change the order in which changes appear within
+** the changeset. It merely reverses the sense of each individual change.
+**
+** If successful, a pointer to a buffer containing the inverted changeset
+** is stored in *ppOut, the size of the same buffer is stored in *pnOut, and
+** SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are
+** zeroed and an SQLite error code returned.
+**
+** It is the responsibility of the caller to eventually call sqlite3_free()
+** on the *ppOut pointer to free the buffer allocation following a successful 
+** call to this function.
+**
+** WARNING/TODO: This function currently assumes that the input is a valid
+** changeset. If it is not, the results are undefined.
+*/
+SQLITE_API int sqlite3changeset_invert(
+  int nIn, const void *pIn,       /* Input changeset */
+  int *pnOut, void **ppOut        /* OUT: Inverse of input */
+);
+
+/*
+** CAPI3REF: Concatenate Two Changeset Objects
+**
+** This function is used to concatenate two changesets, A and B, into a 
+** single changeset. The result is a changeset equivalent to applying
+** changeset A followed by changeset B. 
+**
+** This function combines the two input changesets using an 
+** sqlite3_changegroup object. Calling it produces similar results as the
+** following code fragment:
+**
+**   sqlite3_changegroup *pGrp;
+**   rc = sqlite3_changegroup_new(&pGrp);
+**   if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
+**   if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
+**   if( rc==SQLITE_OK ){
+**     rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
+**   }else{
+**     *ppOut = 0;
+**     *pnOut = 0;
+**   }
+**
+** Refer to the sqlite3_changegroup documentation below for details.
+*/
+SQLITE_API int sqlite3changeset_concat(
+  int nA,                         /* Number of bytes in buffer pA */
+  void *pA,                       /* Pointer to buffer containing changeset A */
+  int nB,                         /* Number of bytes in buffer pB */
+  void *pB,                       /* Pointer to buffer containing changeset B */
+  int *pnOut,                     /* OUT: Number of bytes in output changeset */
+  void **ppOut                    /* OUT: Buffer containing output changeset */
+);
+
+
+/*
+** CAPI3REF: Changegroup Handle
+*/
+typedef struct sqlite3_changegroup sqlite3_changegroup;
+
+/*
+** CAPI3REF: Create A New Changegroup Object
+**
+** An sqlite3_changegroup object is used to combine two or more changesets
+** (or patchsets) into a single changeset (or patchset). A single changegroup
+** object may combine changesets or patchsets, but not both. The output is
+** always in the same format as the input.
+**
+** If successful, this function returns SQLITE_OK and populates (*pp) with
+** a pointer to a new sqlite3_changegroup object before returning. The caller
+** should eventually free the returned object using a call to 
+** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
+** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
+**
+** The usual usage pattern for an sqlite3_changegroup object is as follows:
+**
+** <ul>
+**   <li> It is created using a call to sqlite3changegroup_new().
+**
+**   <li> Zero or more changesets (or patchsets) are added to the object
+**        by calling sqlite3changegroup_add().
+**
+**   <li> The result of combining all input changesets together is obtained 
+**        by the application via a call to sqlite3changegroup_output().
+**
+**   <li> The object is deleted using a call to sqlite3changegroup_delete().
+** </ul>
+**
+** Any number of calls to add() and output() may be made between the calls to
+** new() and delete(), and in any order.
+**
+** As well as the regular sqlite3changegroup_add() and 
+** sqlite3changegroup_output() functions, also available are the streaming
+** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
+*/
+int sqlite3changegroup_new(sqlite3_changegroup **pp);
+
+/*
+** CAPI3REF: Add A Changeset To A Changegroup
+**
+** Add all changes within the changeset (or patchset) in buffer pData (size
+** nData bytes) to the changegroup. 
+**
+** If the buffer contains a patchset, then all prior calls to this function
+** on the same changegroup object must also have specified patchsets. Or, if
+** the buffer contains a changeset, so must have the earlier calls to this
+** function. Otherwise, SQLITE_ERROR is returned and no changes are added
+** to the changegroup.
+**
+** Rows within the changeset and changegroup are identified by the values in
+** their PRIMARY KEY columns. A change in the changeset is considered to
+** apply to the same row as a change already present in the changegroup if
+** the two rows have the same primary key.
+**
+** Changes to rows that do not already appear in the changegroup are
+** simply copied into it. Or, if both the new changeset and the changegroup
+** contain changes that apply to a single row, the final contents of the
+** changegroup depends on the type of each change, as follows:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+**   <tr><th style="white-space:pre">Existing Change  </th>
+**       <th style="white-space:pre">New Change       </th>
+**       <th>Output Change
+**   <tr><td>INSERT <td>INSERT <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+**   <tr><td>INSERT <td>UPDATE <td>
+**       The INSERT change remains in the changegroup. The values in the 
+**       INSERT change are modified as if the row was inserted by the
+**       existing change and then updated according to the new change.
+**   <tr><td>INSERT <td>DELETE <td>
+**       The existing INSERT is removed from the changegroup. The DELETE is
+**       not added.
+**   <tr><td>UPDATE <td>INSERT <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+**   <tr><td>UPDATE <td>UPDATE <td>
+**       The existing UPDATE remains within the changegroup. It is amended 
+**       so that the accompanying values are as if the row was updated once 
+**       by the existing change and then again by the new change.
+**   <tr><td>UPDATE <td>DELETE <td>
+**       The existing UPDATE is replaced by the new DELETE within the
+**       changegroup.
+**   <tr><td>DELETE <td>INSERT <td>
+**       If one or more of the column values in the row inserted by the
+**       new change differ from those in the row deleted by the existing 
+**       change, the existing DELETE is replaced by an UPDATE within the
+**       changegroup. Otherwise, if the inserted row is exactly the same 
+**       as the deleted row, the existing DELETE is simply discarded.
+**   <tr><td>DELETE <td>UPDATE <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+**   <tr><td>DELETE <td>DELETE <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+** </table>
+**
+** If the new changeset contains changes to a table that is already present
+** in the changegroup, then the number of columns and the position of the
+** primary key columns for the table must be consistent. If this is not the
+** case, this function fails with SQLITE_SCHEMA. If the input changeset
+** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is
+** returned. Or, if an out-of-memory condition occurs during processing, this
+** function returns SQLITE_NOMEM. In all cases, if an error occurs the
+** final contents of the changegroup is undefined.
+**
+** If no error occurs, SQLITE_OK is returned.
+*/
+int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
+
+/*
+** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+**
+** Obtain a buffer containing a changeset (or patchset) representing the
+** current contents of the changegroup. If the inputs to the changegroup
+** were themselves changesets, the output is a changeset. Or, if the
+** inputs were patchsets, the output is also a patchset.
+**
+** As with the output of the sqlite3session_changeset() and
+** sqlite3session_patchset() functions, all changes related to a single
+** table are grouped together in the output of this function. Tables appear
+** in the same order as for the very first changeset added to the changegroup.
+** If the second or subsequent changesets added to the changegroup contain
+** changes for tables that do not appear in the first changeset, they are
+** appended onto the end of the output changeset, again in the order in
+** which they are first encountered.
+**
+** If an error occurs, an SQLite error code is returned and the output
+** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
+** is returned and the output variables are set to the size of and a 
+** pointer to the output buffer, respectively. In this case it is the
+** responsibility of the caller to eventually free the buffer using a
+** call to sqlite3_free().
+*/
+int sqlite3changegroup_output(
+  sqlite3_changegroup*,
+  int *pnData,                    /* OUT: Size of output buffer in bytes */
+  void **ppData                   /* OUT: Pointer to output buffer */
+);
+
+/*
+** CAPI3REF: Delete A Changegroup Object
+*/
+void sqlite3changegroup_delete(sqlite3_changegroup*);
+
+/*
+** CAPI3REF: Apply A Changeset To A Database
+**
+** Apply a changeset to a database. This function attempts to update the
+** "main" database attached to handle db with the changes found in the
+** changeset passed via the second and third arguments.
+**
+** The fourth argument (xFilter) passed to this function is the "filter
+** callback". If it is not NULL, then for each table affected by at least one
+** change in the changeset, the filter callback is invoked with
+** the table name as the second argument, and a copy of the context pointer
+** passed as the sixth argument to this function as the first. If the "filter
+** callback" returns zero, then no attempt is made to apply any changes to 
+** the table. Otherwise, if the return value is non-zero or the xFilter
+** argument to this function is NULL, all changes related to the table are
+** attempted.
+**
+** For each table that is not excluded by the filter callback, this function 
+** tests that the target database contains a compatible table. A table is 
+** considered compatible if all of the following are true:
+**
+** <ul>
+**   <li> The table has the same name as the name recorded in the 
+**        changeset, and
+**   <li> The table has at least as many columns as recorded in the 
+**        changeset, and
+**   <li> The table has primary key columns in the same position as 
+**        recorded in the changeset.
+** </ul>
+**
+** If there is no compatible table, it is not an error, but none of the
+** changes associated with the table are applied. A warning message is issued
+** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
+** one such warning is issued for each table in the changeset.
+**
+** For each change for which there is a compatible table, an attempt is made 
+** to modify the table contents according to the UPDATE, INSERT or DELETE 
+** change. If a change cannot be applied cleanly, the conflict handler 
+** function passed as the fifth argument to sqlite3changeset_apply() may be 
+** invoked. A description of exactly when the conflict handler is invoked for 
+** each type of change is below.
+**
+** Unlike the xFilter argument, xConflict may not be passed NULL. The results
+** of passing anything other than a valid function pointer as the xConflict
+** argument are undefined.
+**
+** Each time the conflict handler function is invoked, it must return one
+** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or 
+** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
+** if the second argument passed to the conflict handler is either
+** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
+** returns an illegal value, any changes already made are rolled back and
+** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different 
+** actions are taken by sqlite3changeset_apply() depending on the value
+** returned by each invocation of the conflict-handler function. Refer to
+** the documentation for the three 
+** [SQLITE_CHANGESET_OMIT|available return values] for details.
+**
+** <dl>
+** <dt>DELETE Changes<dd>
+**   For each DELETE change, this function checks if the target database 
+**   contains a row with the same primary key value (or values) as the 
+**   original row values stored in the changeset. If it does, and the values 
+**   stored in all non-primary key columns also match the values stored in 
+**   the changeset the row is deleted from the target database.
+**
+**   If a row with matching primary key values is found, but one or more of
+**   the non-primary key fields contains a value different from the original
+**   row value stored in the changeset, the conflict-handler function is
+**   invoked with [SQLITE_CHANGESET_DATA] as the second argument. If the
+**   database table has more columns than are recorded in the changeset,
+**   only the values of those non-primary key fields are compared against
+**   the current database contents - any trailing database table columns
+**   are ignored.
+**
+**   If no row with matching primary key values is found in the database,
+**   the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+**   passed as the second argument.
+**
+**   If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT
+**   (which can only happen if a foreign key constraint is violated), the
+**   conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT]
+**   passed as the second argument. This includes the case where the DELETE
+**   operation is attempted because an earlier call to the conflict handler
+**   function returned [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>INSERT Changes<dd>
+**   For each INSERT change, an attempt is made to insert the new row into
+**   the database. If the changeset row contains fewer fields than the
+**   database table, the trailing fields are populated with their default
+**   values.
+**
+**   If the attempt to insert the row fails because the database already 
+**   contains a row with the same primary key values, the conflict handler
+**   function is invoked with the second argument set to 
+**   [SQLITE_CHANGESET_CONFLICT].
+**
+**   If the attempt to insert the row fails because of some other constraint
+**   violation (e.g. NOT NULL or UNIQUE), the conflict handler function is 
+**   invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
+**   This includes the case where the INSERT operation is re-attempted because 
+**   an earlier call to the conflict handler function returned 
+**   [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>UPDATE Changes<dd>
+**   For each UPDATE change, this function checks if the target database 
+**   contains a row with the same primary key value (or values) as the 
+**   original row values stored in the changeset. If it does, and the values 
+**   stored in all modified non-primary key columns also match the values
+**   stored in the changeset the row is updated within the target database.
+**
+**   If a row with matching primary key values is found, but one or more of
+**   the modified non-primary key fields contains a value different from an
+**   original row value stored in the changeset, the conflict-handler function
+**   is invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since
+**   UPDATE changes only contain values for non-primary key fields that are
+**   to be modified, only those fields need to match the original values to
+**   avoid the SQLITE_CHANGESET_DATA conflict-handler callback.
+**
+**   If no row with matching primary key values is found in the database,
+**   the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+**   passed as the second argument.
+**
+**   If the UPDATE operation is attempted, but SQLite returns 
+**   SQLITE_CONSTRAINT, the conflict-handler function is invoked with 
+**   [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
+**   This includes the case where the UPDATE operation is attempted after 
+**   an earlier call to the conflict handler function returned
+**   [SQLITE_CHANGESET_REPLACE].  
+** </dl>
+**
+** It is safe to execute SQL statements, including those that write to the
+** table that the callback related to, from within the xConflict callback.
+** This can be used to further customize the applications conflict
+** resolution strategy.
+**
+** All changes made by this function are enclosed in a savepoint transaction.
+** If any other error (aside from a constraint failure when attempting to
+** write to the target database) occurs, then the savepoint transaction is
+** rolled back, restoring the target database to its original state, and an 
+** SQLite error code returned.
+*/
+SQLITE_API int sqlite3changeset_apply(
+  sqlite3 *db,                    /* Apply change to "main" db of this handle */
+  int nChangeset,                 /* Size of changeset in bytes */
+  void *pChangeset,               /* Changeset blob */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    const char *zTab              /* Table name */
+  ),
+  int(*xConflict)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
+    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
+  ),
+  void *pCtx                      /* First argument passed to xConflict */
+);
+
+/* 
+** CAPI3REF: Constants Passed To The Conflict Handler
+**
+** Values that may be passed as the second argument to a conflict-handler.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_DATA<dd>
+**   The conflict handler is invoked with CHANGESET_DATA as the second argument
+**   when processing a DELETE or UPDATE change if a row with the required
+**   PRIMARY KEY fields is present in the database, but one or more other 
+**   (non primary-key) fields modified by the update do not contain the 
+**   expected "before" values.
+** 
+**   The conflicting row, in this case, is the database row with the matching
+**   primary key.
+** 
+** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
+**   The conflict handler is invoked with CHANGESET_NOTFOUND as the second
+**   argument when processing a DELETE or UPDATE change if a row with the
+**   required PRIMARY KEY fields is not present in the database.
+** 
+**   There is no conflicting row in this case. The results of invoking the
+**   sqlite3changeset_conflict() API are undefined.
+** 
+** <dt>SQLITE_CHANGESET_CONFLICT<dd>
+**   CHANGESET_CONFLICT is passed as the second argument to the conflict
+**   handler while processing an INSERT change if the operation would result 
+**   in duplicate primary key values.
+** 
+**   The conflicting row in this case is the database row with the matching
+**   primary key.
+**
+** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
+**   If foreign key handling is enabled, and applying a changeset leaves the
+**   database in a state containing foreign key violations, the conflict 
+**   handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
+**   exactly once before the changeset is committed. If the conflict handler
+**   returns CHANGESET_OMIT, the changes, including those that caused the
+**   foreign key constraint violation, are committed. Or, if it returns
+**   CHANGESET_ABORT, the changeset is rolled back.
+**
+**   No current or conflicting row information is provided. The only function
+**   it is possible to call on the supplied sqlite3_changeset_iter handle
+**   is sqlite3changeset_fk_conflicts().
+** 
+** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
+**   If any other constraint violation occurs while applying a change (i.e. 
+**   a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is 
+**   invoked with CHANGESET_CONSTRAINT as the second argument.
+** 
+**   There is no conflicting row in this case. The results of invoking the
+**   sqlite3changeset_conflict() API are undefined.
+**
+** </dl>
+*/
+#define SQLITE_CHANGESET_DATA        1
+#define SQLITE_CHANGESET_NOTFOUND    2
+#define SQLITE_CHANGESET_CONFLICT    3
+#define SQLITE_CHANGESET_CONSTRAINT  4
+#define SQLITE_CHANGESET_FOREIGN_KEY 5
+
+/* 
+** CAPI3REF: Constants Returned By The Conflict Handler
+**
+** A conflict handler callback must return one of the following three values.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_OMIT<dd>
+**   If a conflict handler returns this value no special action is taken. The
+**   change that caused the conflict is not applied. The session module 
+**   continues to the next change in the changeset.
+**
+** <dt>SQLITE_CHANGESET_REPLACE<dd>
+**   This value may only be returned if the second argument to the conflict
+**   handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
+**   is not the case, any changes applied so far are rolled back and the 
+**   call to sqlite3changeset_apply() returns SQLITE_MISUSE.
+**
+**   If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
+**   handler, then the conflicting row is either updated or deleted, depending
+**   on the type of change.
+**
+**   If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict
+**   handler, then the conflicting row is removed from the database and a
+**   second attempt to apply the change is made. If this second attempt fails,
+**   the original row is restored to the database before continuing.
+**
+** <dt>SQLITE_CHANGESET_ABORT<dd>
+**   If this value is returned, any changes applied so far are rolled back 
+**   and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
+** </dl>
+*/
+#define SQLITE_CHANGESET_OMIT       0
+#define SQLITE_CHANGESET_REPLACE    1
+#define SQLITE_CHANGESET_ABORT      2
+
+/*
+** CAPI3REF: Streaming Versions of API functions.
+**
+** The six streaming API xxx_strm() functions serve similar purposes to the 
+** corresponding non-streaming API functions:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+**   <tr><th>Streaming function<th>Non-streaming equivalent</th>
+**   <tr><td>sqlite3changeset_apply_str<td>[sqlite3changeset_apply] 
+**   <tr><td>sqlite3changeset_concat_str<td>[sqlite3changeset_concat] 
+**   <tr><td>sqlite3changeset_invert_str<td>[sqlite3changeset_invert] 
+**   <tr><td>sqlite3changeset_start_str<td>[sqlite3changeset_start] 
+**   <tr><td>sqlite3session_changeset_str<td>[sqlite3session_changeset] 
+**   <tr><td>sqlite3session_patchset_str<td>[sqlite3session_patchset] 
+** </table>
+**
+** Non-streaming functions that accept changesets (or patchsets) as input
+** require that the entire changeset be stored in a single buffer in memory. 
+** Similarly, those that return a changeset or patchset do so by returning 
+** a pointer to a single large buffer allocated using sqlite3_malloc(). 
+** Normally this is convenient. However, if an application running in a 
+** low-memory environment is required to handle very large changesets, the
+** large contiguous memory allocations required can become onerous.
+**
+** In order to avoid this problem, instead of a single large buffer, input
+** is passed to a streaming API functions by way of a callback function that
+** the sessions module invokes to incrementally request input data as it is
+** required. In all cases, a pair of API function parameters such as
+**
+**  <pre>
+**  &nbsp;     int nChangeset,
+**  &nbsp;     void *pChangeset,
+**  </pre>
+**
+** Is replaced by:
+**
+**  <pre>
+**  &nbsp;     int (*xInput)(void *pIn, void *pData, int *pnData),
+**  &nbsp;     void *pIn,
+**  </pre>
+**
+** Each time the xInput callback is invoked by the sessions module, the first
+** argument passed is a copy of the supplied pIn context pointer. The second 
+** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no 
+** error occurs the xInput method should copy up to (*pnData) bytes of data 
+** into the buffer and set (*pnData) to the actual number of bytes copied 
+** before returning SQLITE_OK. If the input is completely exhausted, (*pnData) 
+** should be set to zero to indicate this. Or, if an error occurs, an SQLite 
+** error code should be returned. In all cases, if an xInput callback returns
+** an error, all processing is abandoned and the streaming API function
+** returns a copy of the error code to the caller.
+**
+** In the case of sqlite3changeset_start_strm(), the xInput callback may be
+** invoked by the sessions module at any point during the lifetime of the
+** iterator. If such an xInput callback returns an error, the iterator enters
+** an error state, whereby all subsequent calls to iterator functions 
+** immediately fail with the same error code as returned by xInput.
+**
+** Similarly, streaming API functions that return changesets (or patchsets)
+** return them in chunks by way of a callback function instead of via a
+** pointer to a single large buffer. In this case, a pair of parameters such
+** as:
+**
+**  <pre>
+**  &nbsp;     int *pnChangeset,
+**  &nbsp;     void **ppChangeset,
+**  </pre>
+**
+** Is replaced by:
+**
+**  <pre>
+**  &nbsp;     int (*xOutput)(void *pOut, const void *pData, int nData),
+**  &nbsp;     void *pOut
+**  </pre>
+**
+** The xOutput callback is invoked zero or more times to return data to
+** the application. The first parameter passed to each call is a copy of the
+** pOut pointer supplied by the application. The second parameter, pData,
+** points to a buffer nData bytes in size containing the chunk of output
+** data being returned. If the xOutput callback successfully processes the
+** supplied data, it should return SQLITE_OK to indicate success. Otherwise,
+** it should return some other SQLite error code. In this case processing
+** is immediately abandoned and the streaming API function returns a copy
+** of the xOutput error code to the application.
+**
+** The sessions module never invokes an xOutput callback with the third 
+** parameter set to a value less than or equal to zero. Other than this,
+** no guarantees are made as to the size of the chunks of data returned.
+*/
+SQLITE_API int sqlite3changeset_apply_strm(
+  sqlite3 *db,                    /* Apply change to "main" db of this handle */
+  int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+  void *pIn,                                          /* First arg for xInput */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    const char *zTab              /* Table name */
+  ),
+  int(*xConflict)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
+    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
+  ),
+  void *pCtx                      /* First argument passed to xConflict */
+);
+SQLITE_API int sqlite3changeset_concat_strm(
+  int (*xInputA)(void *pIn, void *pData, int *pnData),
+  void *pInA,
+  int (*xInputB)(void *pIn, void *pData, int *pnData),
+  void *pInB,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+SQLITE_API int sqlite3changeset_invert_strm(
+  int (*xInput)(void *pIn, void *pData, int *pnData),
+  void *pIn,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+SQLITE_API int sqlite3changeset_start_strm(
+  sqlite3_changeset_iter **pp,
+  int (*xInput)(void *pIn, void *pData, int *pnData),
+  void *pIn
+);
+SQLITE_API int sqlite3session_changeset_strm(
+  sqlite3_session *pSession,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+SQLITE_API int sqlite3session_patchset_strm(
+  sqlite3_session *pSession,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+int sqlite3changegroup_add_strm(sqlite3_changegroup*, 
+    int (*xInput)(void *pIn, void *pData, int *pnData),
+    void *pIn
+);
+int sqlite3changegroup_output_strm(sqlite3_changegroup*,
+    int (*xOutput)(void *pOut, const void *pData, int nData), 
+    void *pOut
+);
+
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */
+
+/******** End of sqlite3session.h *********/
+/******** Begin file fts5.h *********/
 /*
 ** 2014 May 31
 **
 ** The author disclaims copyright to this source code.  In place of
 ** a legal notice, here is a blessing:
 **
 **    May you do good and not evil.
 **    May you find forgiveness for yourself and forgive others.
 **    May you share freely, never taking more than you give.
 **
@@ skipping 65 matching lines @@
 **   If parameter iCol is less than zero, set output variable *pnToken
 **   to the total number of tokens in the current row. Or, if iCol is
 **   non-negative but less than the number of columns in the table, set
 **   *pnToken to the number of tokens in column iCol of the current row.
 **
 **   If parameter iCol is greater than or equal to the number of columns
 **   in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
 **   an OOM condition or IO error), an appropriate SQLite error code is 
 **   returned.
 **
+**   This function may be quite inefficient if used with an FTS5 table
+**   created with the "columnsize=0" option.
+**
 ** xColumnText:
 **   This function attempts to retrieve the text of column iCol of the
 **   current document. If successful, (*pz) is set to point to a buffer
 **   containing the text in utf-8 encoding, (*pn) is set to the size in bytes
 **   (not characters) of the buffer and SQLITE_OK is returned. Otherwise,
 **   if an error occurs, an SQLite error code is returned and the final values
 **   of (*pz) and (*pn) are undefined.
 **
 ** xPhraseCount:
 **   Returns the number of phrases in the current query expression.
 **
 ** xPhraseSize:
 **   Returns the number of tokens in phrase iPhrase of the query. Phrases
 **   are numbered starting from zero.
 **
 ** xInstCount:
 **   Set *pnInst to the total number of occurrences of all phrases within
 **   the query within the current row. Return SQLITE_OK if successful, or
 **   an error code (i.e. SQLITE_NOMEM) if an error occurs.
 **
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. If the FTS5 table is created 
+**   with either "detail=none" or "detail=column" and "content=" option 
+**   (i.e. if it is a contentless table), then this API always returns 0.
+**
 ** xInst:
 **   Query for the details of phrase match iIdx within the current row.
 **   Phrase matches are numbered starting from zero, so the iIdx argument
 **   should be greater than or equal to zero and smaller than the value
 **   output by xInstCount().
 **
+**   Usually, output parameter *piPhrase is set to the phrase number, *piCol
+**   to the column in which it occurs and *piOff the token offset of the
+**   first token of the phrase. The exception is if the table was created
+**   with the offsets=0 option specified. In this case *piOff is always
+**   set to -1.
+**
 **   Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM) 
 **   if an error occurs.
 **
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. 
+**
 ** xRowid:
 **   Returns the rowid of the current row.
 **
 ** xTokenize:
 **   Tokenize text using the tokenizer belonging to the FTS5 table.
 **
 ** xQueryPhrase(pFts5, iPhrase, pUserData, xCallback):
 **   This API function is used to query the FTS table for phrase iPhrase
 **   of the current query. Specifically, a query equivalent to:
 **
 **       ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
 **
 **   with $p set to a phrase equivalent to the phrase iPhrase of the
-**   current query is executed. For each row visited, the callback function
-**   passed as the fourth argument is invoked. The context and API objects 
-**   passed to the callback function may be used to access the properties of
-**   each matched row. Invoking Api.xUserData() returns a copy of the pointer
-**   passed as the third argument to pUserData.
+**   current query is executed. Any column filter that applies to
+**   phrase iPhrase of the current query is included in $p. For each 
+**   row visited, the callback function passed as the fourth argument 
+**   is invoked. The context and API objects passed to the callback 
+**   function may be used to access the properties of each matched row.
+**   Invoking Api.xUserData() returns a copy of the pointer passed as 
+**   the third argument to pUserData.
 **
 **   If the callback function returns any value other than SQLITE_OK, the
 **   query is abandoned and the xQueryPhrase function returns immediately.
 **   If the returned value is SQLITE_DONE, xQueryPhrase returns SQLITE_OK.
 **   Otherwise, the error code is propagated upwards.
 **
 **   If the query runs to completion without incident, SQLITE_OK is returned.
 **   Or, if some error occurs before the query completes or is aborted by
 **   the callback, an SQLite error code is returned.
 **
@@ skipping 45 matching lines @@
 **   This function is used, along with type Fts5PhraseIter and the xPhraseNext
 **   method, to iterate through all instances of a single query phrase within
 **   the current row. This is the same information as is accessible via the
 **   xInstCount/xInst APIs. While the xInstCount/xInst APIs are more convenient
 **   to use, this API may be faster under some circumstances. To iterate 
 **   through instances of phrase iPhrase, use the following code:
 **
 **       Fts5PhraseIter iter;
 **       int iCol, iOff;
 **       for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
-**           iOff>=0;
+**           iCol>=0;
 **           pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
 **       ){
 **         // An instance of phrase iPhrase at offset iOff of column iCol
 **       }
 **
 **   The Fts5PhraseIter structure is defined above. Applications should not
 **   modify this structure directly - it should only be used as shown above
-**   with the xPhraseFirst() and xPhraseNext() API methods.
+**   with the xPhraseFirst() and xPhraseNext() API methods (and by
+**   xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. If the FTS5 table is created 
+**   with either "detail=none" or "detail=column" and "content=" option 
+**   (i.e. if it is a contentless table), then this API always iterates
+**   through an empty set (all calls to xPhraseFirst() set iCol to -1).
 **
 ** xPhraseNext()
 **   See xPhraseFirst above.
+**
+** xPhraseFirstColumn()
+**   This function and xPhraseNextColumn() are similar to the xPhraseFirst()
+**   and xPhraseNext() APIs described above. The difference is that instead
+**   of iterating through all instances of a phrase in the current row, these
+**   APIs are used to iterate through the set of columns in the current row
+**   that contain one or more instances of a specified phrase. For example:
+**
+**       Fts5PhraseIter iter;
+**       int iCol;
+**       for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
+**           iCol>=0;
+**           pApi->xPhraseNextColumn(pFts, &iter, &iCol)
+**       ){
+**         // Column iCol contains at least one instance of phrase iPhrase
+**       }
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" option. If the FTS5 table is created with either 
+**   "detail=none" "content=" option (i.e. if it is a contentless table), 
+**   then this API always iterates through an empty set (all calls to 
+**   xPhraseFirstColumn() set iCol to -1).
+**
+**   The information accessed using this API and its companion
+**   xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
+**   (or xInst/xInstCount). The chief advantage of this API is that it is
+**   significantly more efficient than those alternatives when used with
+**   "detail=column" tables.  
+**
+** xPhraseNextColumn()
+**   See xPhraseFirstColumn above.
 */
 struct Fts5ExtensionApi {
-  int iVersion;                   /* Currently always set to 1 */
+  int iVersion;                   /* Currently always set to 3 */
 
   void *(*xUserData)(Fts5Context*);
 
   int (*xColumnCount)(Fts5Context*);
   int (*xRowCount)(Fts5Context*, sqlite3_int64 *pnRow);
   int (*xColumnTotalSize)(Fts5Context*, int iCol, sqlite3_int64 *pnToken);
 
   int (*xTokenize)(Fts5Context*, 
     const char *pText, int nText, /* Text to tokenize */
     void *pCtx,                   /* Context passed to xToken() */
     int (*xToken)(void*, int, const char*, int, int, int)       /* Callback */
   );
 
   int (*xPhraseCount)(Fts5Context*);
   int (*xPhraseSize)(Fts5Context*, int iPhrase);
 
   int (*xInstCount)(Fts5Context*, int *pnInst);
   int (*xInst)(Fts5Context*, int iIdx, int *piPhrase, int *piCol, int *piOff);
 
   sqlite3_int64 (*xRowid)(Fts5Context*);
   int (*xColumnText)(Fts5Context*, int iCol, const char **pz, int *pn);
   int (*xColumnSize)(Fts5Context*, int iCol, int *pnToken);
 
   int (*xQueryPhrase)(Fts5Context*, int iPhrase, void *pUserData,
     int(*)(const Fts5ExtensionApi*,Fts5Context*,void*)
   );
   int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
   void *(*xGetAuxdata)(Fts5Context*, int bClear);
 
-  void (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
+  int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
   void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
+
+  int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
+  void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
 };
 
 /* 
 ** CUSTOM AUXILIARY FUNCTIONS
 *************************************************************************/
 
 /*************************************************************************
 ** CUSTOM TOKENIZERS
 **
 ** Applications may also register custom tokenizer types. A tokenizer 
 ** is registered by providing fts5 with a populated instance of the 
 ** following structure. All structure methods must be defined, setting
 ** any member of the fts5_tokenizer struct to NULL leads to undefined
 ** behaviour. The structure methods are expected to function as follows:
 **
 ** xCreate:
-**   This function is used to allocate and inititalize a tokenizer instance.
+**   This function is used to allocate and initialize a tokenizer instance.
 **   A tokenizer instance is required to actually tokenize text.
 **
 **   The first argument passed to this function is a copy of the (void*)
 **   pointer provided by the application when the fts5_tokenizer object
 **   was registered with FTS5 (the third argument to xCreateTokenizer()). 
 **   The second and third arguments are an array of nul-terminated strings
 **   containing the tokenizer arguments, if any, specified following the
 **   tokenizer name as part of the CREATE VIRTUAL TABLE statement used
 **   to create the FTS5 table.
 **
@@ skipping 239 matching lines @@
 /*
 ** END OF REGISTRATION API
 *************************************************************************/
 
 #ifdef __cplusplus
 }  /* end of the 'extern "C"' block */
 #endif
 
 #endif /* _FTS5_H */
 
-
+/******** End of fts5.h *********/