Index: third_party/hwcplus/include/hardware/hardware.h |
diff --git a/third_party/hwcplus/include/hardware/hardware.h b/third_party/hwcplus/include/hardware/hardware.h |
deleted file mode 100644 |
index 9466537943e917d322471c0397862cd7b85a299d..0000000000000000000000000000000000000000 |
--- a/third_party/hwcplus/include/hardware/hardware.h |
+++ /dev/null |
@@ -1,236 +0,0 @@ |
-/* |
- * Copyright (C) 2008 The Android Open Source Project |
- * |
- * Licensed under the Apache License, Version 2.0 (the "License"); |
- * you may not use this file except in compliance with the License. |
- * You may obtain a copy of the License at |
- * |
- * http://www.apache.org/licenses/LICENSE-2.0 |
- * |
- * Unless required by applicable law or agreed to in writing, software |
- * distributed under the License is distributed on an "AS IS" BASIS, |
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
- * See the License for the specific language governing permissions and |
- * limitations under the License. |
- */ |
- |
-#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H |
-#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H |
- |
-#include <stdint.h> |
-#include <sys/cdefs.h> |
- |
-#include <cutils/native_handle.h> |
-#include <system/graphics.h> |
- |
-__BEGIN_DECLS |
- |
-/* |
- * Value for the hw_module_t.tag field |
- */ |
- |
-#define MAKE_TAG_CONSTANT(A,B,C,D) (((A) << 24) | ((B) << 16) | ((C) << 8) | (D)) |
- |
-#define HARDWARE_MODULE_TAG MAKE_TAG_CONSTANT('H', 'W', 'M', 'T') |
-#define HARDWARE_DEVICE_TAG MAKE_TAG_CONSTANT('H', 'W', 'D', 'T') |
- |
-#define HARDWARE_MAKE_API_VERSION(maj,min) \ |
- ((((maj) & 0xff) << 8) | ((min) & 0xff)) |
- |
-#define HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) \ |
- ((((maj) & 0xff) << 24) | (((min) & 0xff) << 16) | ((hdr) & 0xffff)) |
-#define HARDWARE_API_VERSION_2_MAJ_MIN_MASK 0xffff0000 |
-#define HARDWARE_API_VERSION_2_HEADER_MASK 0x0000ffff |
- |
- |
-/* |
- * The current HAL API version. |
- * |
- * All module implementations must set the hw_module_t.hal_api_version field |
- * to this value when declaring the module with HAL_MODULE_INFO_SYM. |
- * |
- * Note that previous implementations have always set this field to 0. |
- * Therefore, libhardware HAL API will always consider versions 0.0 and 1.0 |
- * to be 100% binary compatible. |
- * |
- */ |
-#define HARDWARE_HAL_API_VERSION HARDWARE_MAKE_API_VERSION(1, 0) |
- |
-/* |
- * Helper macros for module implementors. |
- * |
- * The derived modules should provide convenience macros for supported |
- * versions so that implementations can explicitly specify module/device |
- * versions at definition time. |
- * |
- * Use this macro to set the hw_module_t.module_api_version field. |
- */ |
-#define HARDWARE_MODULE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min) |
-#define HARDWARE_MODULE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) |
- |
-/* |
- * Use this macro to set the hw_device_t.version field |
- */ |
-#define HARDWARE_DEVICE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min) |
-#define HARDWARE_DEVICE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) |
- |
-struct hw_module_t; |
-struct hw_module_methods_t; |
-struct hw_device_t; |
- |
-/** |
- * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM |
- * and the fields of this data structure must begin with hw_module_t |
- * followed by module specific information. |
- */ |
-typedef struct hw_module_t { |
- /** tag must be initialized to HARDWARE_MODULE_TAG */ |
- uint32_t tag; |
- |
- /** |
- * The API version of the implemented module. The module owner is |
- * responsible for updating the version when a module interface has |
- * changed. |
- * |
- * The derived modules such as gralloc and audio own and manage this field. |
- * The module user must interpret the version field to decide whether or |
- * not to inter-operate with the supplied module implementation. |
- * For example, SurfaceFlinger is responsible for making sure that |
- * it knows how to manage different versions of the gralloc-module API, |
- * and AudioFlinger must know how to do the same for audio-module API. |
- * |
- * The module API version should include a major and a minor component. |
- * For example, version 1.0 could be represented as 0x0100. This format |
- * implies that versions 0x0100-0x01ff are all API-compatible. |
- * |
- * In the future, libhardware will expose a hw_get_module_version() |
- * (or equivalent) function that will take minimum/maximum supported |
- * versions as arguments and would be able to reject modules with |
- * versions outside of the supplied range. |
- */ |
- uint16_t module_api_version; |
-#define version_major module_api_version |
- /** |
- * version_major/version_minor defines are supplied here for temporary |
- * source code compatibility. They will be removed in the next version. |
- * ALL clients must convert to the new version format. |
- */ |
- |
- /** |
- * The API version of the HAL module interface. This is meant to |
- * version the hw_module_t, hw_module_methods_t, and hw_device_t |
- * structures and definitions. |
- * |
- * The HAL interface owns this field. Module users/implementations |
- * must NOT rely on this value for version information. |
- * |
- * Presently, 0 is the only valid value. |
- */ |
- uint16_t hal_api_version; |
-#define version_minor hal_api_version |
- |
- /** Identifier of module */ |
- const char *id; |
- |
- /** Name of this module */ |
- const char *name; |
- |
- /** Author/owner/implementor of the module */ |
- const char *author; |
- |
- /** Modules methods */ |
- struct hw_module_methods_t* methods; |
- |
- /** module's dso */ |
- void* dso; |
- |
- /** padding to 128 bytes, reserved for future use */ |
- uint32_t reserved[32-7]; |
- |
-} hw_module_t; |
- |
-typedef struct hw_module_methods_t { |
- /** Open a specific device */ |
- int (*open)(const struct hw_module_t* module, const char* id, |
- struct hw_device_t** device); |
- |
-} hw_module_methods_t; |
- |
-/** |
- * Every device data structure must begin with hw_device_t |
- * followed by module specific public methods and attributes. |
- */ |
-typedef struct hw_device_t { |
- /** tag must be initialized to HARDWARE_DEVICE_TAG */ |
- uint32_t tag; |
- |
- /** |
- * Version of the module-specific device API. This value is used by |
- * the derived-module user to manage different device implementations. |
- * |
- * The module user is responsible for checking the module_api_version |
- * and device version fields to ensure that the user is capable of |
- * communicating with the specific module implementation. |
- * |
- * One module can support multiple devices with different versions. This |
- * can be useful when a device interface changes in an incompatible way |
- * but it is still necessary to support older implementations at the same |
- * time. One such example is the Camera 2.0 API. |
- * |
- * This field is interpreted by the module user and is ignored by the |
- * HAL interface itself. |
- */ |
- uint32_t version; |
- |
- /** reference to the module this device belongs to */ |
- struct hw_module_t* module; |
- |
- /** padding reserved for future use */ |
- uint32_t reserved[12]; |
- |
- /** Close this device */ |
- int (*close)(struct hw_device_t* device); |
- |
-} hw_device_t; |
- |
-/** |
- * Name of the hal_module_info |
- */ |
-#define HAL_MODULE_INFO_SYM HMI |
- |
-/** |
- * Name of the hal_module_info as a string |
- */ |
-#define HAL_MODULE_INFO_SYM_AS_STR "HMI" |
- |
-/** |
- * Get the module info associated with a module by id. |
- * |
- * @return: 0 == success, <0 == error and *module == NULL |
- */ |
-int hw_get_module(const char *id, const struct hw_module_t **module); |
- |
-/** |
- * Get the module info associated with a module instance by class 'class_id' |
- * and instance 'inst'. |
- * |
- * Some modules types necessitate multiple instances. For example audio supports |
- * multiple concurrent interfaces and thus 'audio' is the module class |
- * and 'primary' or 'a2dp' are module interfaces. This implies that the files |
- * providing these modules would be named audio.primary.<variant>.so and |
- * audio.a2dp.<variant>.so |
- * |
- * @return: 0 == success, <0 == error and *module == NULL |
- */ |
-int hw_get_module_by_class(const char *class_id, const char *inst, |
- const struct hw_module_t **module); |
- |
-/** |
- * Provide a function to handle log messages. |
- */ |
-typedef int (*hwcplus_log_fn_t)(int prio, const char* tag, const char* msg); |
-void hwcplus_set_log_fn(hwcplus_log_fn_t fn); |
- |
-__END_DECLS |
- |
-#endif /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */ |