Update 'requests' lib to v2.0.

third_party/requests/packages/charade/chardistribution.py

Index: third_party/requests/packages/charade/chardistribution.py
diff --git a/third_party/requests/packages/charade/chardistribution.py b/third_party/requests/packages/charade/chardistribution.py
index 4e64a00befb85883ab60e23fe7c630c151149eb1..dfd3355e916661b370ae70fc3735e40c4d3d102e 100644
--- a/third_party/requests/packages/charade/chardistribution.py
+++ b/third_party/requests/packages/charade/chardistribution.py
@@ -1,231 +1,231 @@
-######################## BEGIN LICENSE BLOCK ########################
-# The Original Code is Mozilla Communicator client code.
-#
-# The Initial Developer of the Original Code is
-# Netscape Communications Corporation.
-# Portions created by the Initial Developer are Copyright (C) 1998
-# the Initial Developer. All Rights Reserved.
-#
-# Contributor(s):
-#   Mark Pilgrim - port to Python
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301  USA
-######################### END LICENSE BLOCK #########################
-
-from .euctwfreq import (EUCTWCharToFreqOrder, EUCTW_TABLE_SIZE,
-                        EUCTW_TYPICAL_DISTRIBUTION_RATIO)
-from .euckrfreq import (EUCKRCharToFreqOrder, EUCKR_TABLE_SIZE,
-                        EUCKR_TYPICAL_DISTRIBUTION_RATIO)
-from .gb2312freq import (GB2312CharToFreqOrder, GB2312_TABLE_SIZE,
-                         GB2312_TYPICAL_DISTRIBUTION_RATIO)
-from .big5freq import (Big5CharToFreqOrder, BIG5_TABLE_SIZE,
-                       BIG5_TYPICAL_DISTRIBUTION_RATIO)
-from .jisfreq import (JISCharToFreqOrder, JIS_TABLE_SIZE,
-                      JIS_TYPICAL_DISTRIBUTION_RATIO)
-from .compat import wrap_ord
-
-ENOUGH_DATA_THRESHOLD = 1024
-SURE_YES = 0.99
-SURE_NO = 0.01
-MINIMUM_DATA_THRESHOLD = 3
-
-
-class CharDistributionAnalysis:
-    def __init__(self):
-        # Mapping table to get frequency order from char order (get from
-        # GetOrder())
-        self._mCharToFreqOrder = None
-        self._mTableSize = None  # Size of above table
-        # This is a constant value which varies from language to language,
-        # used in calculating confidence.  See
-        # http://www.mozilla.org/projects/intl/UniversalCharsetDetection.html
-        # for further detail.
-        self._mTypicalDistributionRatio = None
-        self.reset()
-
-    def reset(self):
-        """reset analyser, clear any state"""
-        # If this flag is set to True, detection is done and conclusion has
-        # been made
-        self._mDone = False
-        self._mTotalChars = 0  # Total characters encountered
-        # The number of characters whose frequency order is less than 512
-        self._mFreqChars = 0
-
-    def feed(self, aBuf, aCharLen):
-        """feed a character with known length"""
-        if aCharLen == 2:
-            # we only care about 2-bytes character in our distribution analysis
-            order = self.get_order(aBuf)
-        else:
-            order = -1
-        if order >= 0:
-            self._mTotalChars += 1
-            # order is valid
-            if order < self._mTableSize:
-                if 512 > self._mCharToFreqOrder[order]:
-                    self._mFreqChars += 1
-
-    def get_confidence(self):
-        """return confidence based on existing data"""
-        # if we didn't receive any character in our consideration range,
-        # return negative answer
-        if self._mTotalChars <= 0 or self._mFreqChars <= MINIMUM_DATA_THRESHOLD:
-            return SURE_NO
-
-        if self._mTotalChars != self._mFreqChars:
-            r = (self._mFreqChars / ((self._mTotalChars - self._mFreqChars)
-                 * self._mTypicalDistributionRatio))
-            if r < SURE_YES:
-                return r
-
-        # normalize confidence (we don't want to be 100% sure)
-        return SURE_YES
-
-    def got_enough_data(self):
-        # It is not necessary to receive all data to draw conclusion.
-        # For charset detection, certain amount of data is enough
-        return self._mTotalChars > ENOUGH_DATA_THRESHOLD
-
-    def get_order(self, aBuf):
-        # We do not handle characters based on the original encoding string,
-        # but convert this encoding string to a number, here called order.
-        # This allows multiple encodings of a language to share one frequency
-        # table.
-        return -1
-
-
-class EUCTWDistributionAnalysis(CharDistributionAnalysis):
-    def __init__(self):
-        CharDistributionAnalysis.__init__(self)
-        self._mCharToFreqOrder = EUCTWCharToFreqOrder
-        self._mTableSize = EUCTW_TABLE_SIZE
-        self._mTypicalDistributionRatio = EUCTW_TYPICAL_DISTRIBUTION_RATIO
-
-    def get_order(self, aBuf):
-        # for euc-TW encoding, we are interested
-        #   first  byte range: 0xc4 -- 0xfe
-        #   second byte range: 0xa1 -- 0xfe
-        # no validation needed here. State machine has done that
-        first_char = wrap_ord(aBuf[0])
-        if first_char >= 0xC4:
-            return 94 * (first_char - 0xC4) + wrap_ord(aBuf[1]) - 0xA1
-        else:
-            return -1
-
-
-class EUCKRDistributionAnalysis(CharDistributionAnalysis):
-    def __init__(self):
-        CharDistributionAnalysis.__init__(self)
-        self._mCharToFreqOrder = EUCKRCharToFreqOrder
-        self._mTableSize = EUCKR_TABLE_SIZE
-        self._mTypicalDistributionRatio = EUCKR_TYPICAL_DISTRIBUTION_RATIO
-
-    def get_order(self, aBuf):
-        # for euc-KR encoding, we are interested
-        #   first  byte range: 0xb0 -- 0xfe
-        #   second byte range: 0xa1 -- 0xfe
-        # no validation needed here. State machine has done that
-        first_char = wrap_ord(aBuf[0])
-        if first_char >= 0xB0:
-            return 94 * (first_char - 0xB0) + wrap_ord(aBuf[1]) - 0xA1
-        else:
-            return -1
-
-
-class GB2312DistributionAnalysis(CharDistributionAnalysis):
-    def __init__(self):
-        CharDistributionAnalysis.__init__(self)
-        self._mCharToFreqOrder = GB2312CharToFreqOrder
-        self._mTableSize = GB2312_TABLE_SIZE
-        self._mTypicalDistributionRatio = GB2312_TYPICAL_DISTRIBUTION_RATIO
-
-    def get_order(self, aBuf):
-        # for GB2312 encoding, we are interested
-        #  first  byte range: 0xb0 -- 0xfe
-        #  second byte range: 0xa1 -- 0xfe
-        # no validation needed here. State machine has done that
-        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
-        if (first_char >= 0xB0) and (second_char >= 0xA1):
-            return 94 * (first_char - 0xB0) + second_char - 0xA1
-        else:
-            return -1
-
-
-class Big5DistributionAnalysis(CharDistributionAnalysis):
-    def __init__(self):
-        CharDistributionAnalysis.__init__(self)
-        self._mCharToFreqOrder = Big5CharToFreqOrder
-        self._mTableSize = BIG5_TABLE_SIZE
-        self._mTypicalDistributionRatio = BIG5_TYPICAL_DISTRIBUTION_RATIO
-
-    def get_order(self, aBuf):
-        # for big5 encoding, we are interested
-        #   first  byte range: 0xa4 -- 0xfe
-        #   second byte range: 0x40 -- 0x7e , 0xa1 -- 0xfe
-        # no validation needed here. State machine has done that
-        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
-        if first_char >= 0xA4:
-            if second_char >= 0xA1:
-                return 157 * (first_char - 0xA4) + second_char - 0xA1 + 63
-            else:
-                return 157 * (first_char - 0xA4) + second_char - 0x40
-        else:
-            return -1
-
-
-class SJISDistributionAnalysis(CharDistributionAnalysis):
-    def __init__(self):
-        CharDistributionAnalysis.__init__(self)
-        self._mCharToFreqOrder = JISCharToFreqOrder
-        self._mTableSize = JIS_TABLE_SIZE
-        self._mTypicalDistributionRatio = JIS_TYPICAL_DISTRIBUTION_RATIO
-
-    def get_order(self, aBuf):
-        # for sjis encoding, we are interested
-        #   first  byte range: 0x81 -- 0x9f , 0xe0 -- 0xfe
-        #   second byte range: 0x40 -- 0x7e,  0x81 -- oxfe
-        # no validation needed here. State machine has done that
-        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
-        if (first_char >= 0x81) and (first_char <= 0x9F):
-            order = 188 * (first_char - 0x81)
-        elif (first_char >= 0xE0) and (first_char <= 0xEF):
-            order = 188 * (first_char - 0xE0 + 31)
-        else:
-            return -1
-        order = order + second_char - 0x40
-        if second_char > 0x7F:
-            order = -1
-        return order
-
-
-class EUCJPDistributionAnalysis(CharDistributionAnalysis):
-    def __init__(self):
-        CharDistributionAnalysis.__init__(self)
-        self._mCharToFreqOrder = JISCharToFreqOrder
-        self._mTableSize = JIS_TABLE_SIZE
-        self._mTypicalDistributionRatio = JIS_TYPICAL_DISTRIBUTION_RATIO
-
-    def get_order(self, aBuf):
-        # for euc-JP encoding, we are interested
-        #   first  byte range: 0xa0 -- 0xfe
-        #   second byte range: 0xa1 -- 0xfe
-        # no validation needed here. State machine has done that
-        char = wrap_ord(aBuf[0])
-        if char >= 0xA0:
-            return 94 * (char - 0xA1) + wrap_ord(aBuf[1]) - 0xa1
-        else:
-            return -1
+######################## BEGIN LICENSE BLOCK ########################
+# The Original Code is Mozilla Communicator client code.
+#
+# The Initial Developer of the Original Code is
+# Netscape Communications Corporation.
+# Portions created by the Initial Developer are Copyright (C) 1998
+# the Initial Developer. All Rights Reserved.
+#
+# Contributor(s):
+#   Mark Pilgrim - port to Python
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301  USA
+######################### END LICENSE BLOCK #########################
+
+from .euctwfreq import (EUCTWCharToFreqOrder, EUCTW_TABLE_SIZE,
+                        EUCTW_TYPICAL_DISTRIBUTION_RATIO)
+from .euckrfreq import (EUCKRCharToFreqOrder, EUCKR_TABLE_SIZE,
+                        EUCKR_TYPICAL_DISTRIBUTION_RATIO)
+from .gb2312freq import (GB2312CharToFreqOrder, GB2312_TABLE_SIZE,
+                         GB2312_TYPICAL_DISTRIBUTION_RATIO)
+from .big5freq import (Big5CharToFreqOrder, BIG5_TABLE_SIZE,
+                       BIG5_TYPICAL_DISTRIBUTION_RATIO)
+from .jisfreq import (JISCharToFreqOrder, JIS_TABLE_SIZE,
+                      JIS_TYPICAL_DISTRIBUTION_RATIO)
+from .compat import wrap_ord
+
+ENOUGH_DATA_THRESHOLD = 1024
+SURE_YES = 0.99
+SURE_NO = 0.01
+MINIMUM_DATA_THRESHOLD = 3
+
+
+class CharDistributionAnalysis:
+    def __init__(self):
+        # Mapping table to get frequency order from char order (get from
+        # GetOrder())
+        self._mCharToFreqOrder = None
+        self._mTableSize = None  # Size of above table
+        # This is a constant value which varies from language to language,
+        # used in calculating confidence.  See
+        # http://www.mozilla.org/projects/intl/UniversalCharsetDetection.html
+        # for further detail.
+        self._mTypicalDistributionRatio = None
+        self.reset()
+
+    def reset(self):
+        """reset analyser, clear any state"""
+        # If this flag is set to True, detection is done and conclusion has
+        # been made
+        self._mDone = False
+        self._mTotalChars = 0  # Total characters encountered
+        # The number of characters whose frequency order is less than 512
+        self._mFreqChars = 0
+
+    def feed(self, aBuf, aCharLen):
+        """feed a character with known length"""
+        if aCharLen == 2:
+            # we only care about 2-bytes character in our distribution analysis
+            order = self.get_order(aBuf)
+        else:
+            order = -1
+        if order >= 0:
+            self._mTotalChars += 1
+            # order is valid
+            if order < self._mTableSize:
+                if 512 > self._mCharToFreqOrder[order]:
+                    self._mFreqChars += 1
+
+    def get_confidence(self):
+        """return confidence based on existing data"""
+        # if we didn't receive any character in our consideration range,
+        # return negative answer
+        if self._mTotalChars <= 0 or self._mFreqChars <= MINIMUM_DATA_THRESHOLD:
+            return SURE_NO
+
+        if self._mTotalChars != self._mFreqChars:
+            r = (self._mFreqChars / ((self._mTotalChars - self._mFreqChars)
+                 * self._mTypicalDistributionRatio))
+            if r < SURE_YES:
+                return r
+
+        # normalize confidence (we don't want to be 100% sure)
+        return SURE_YES
+
+    def got_enough_data(self):
+        # It is not necessary to receive all data to draw conclusion.
+        # For charset detection, certain amount of data is enough
+        return self._mTotalChars > ENOUGH_DATA_THRESHOLD
+
+    def get_order(self, aBuf):
+        # We do not handle characters based on the original encoding string,
+        # but convert this encoding string to a number, here called order.
+        # This allows multiple encodings of a language to share one frequency
+        # table.
+        return -1
+
+
+class EUCTWDistributionAnalysis(CharDistributionAnalysis):
+    def __init__(self):
+        CharDistributionAnalysis.__init__(self)
+        self._mCharToFreqOrder = EUCTWCharToFreqOrder
+        self._mTableSize = EUCTW_TABLE_SIZE
+        self._mTypicalDistributionRatio = EUCTW_TYPICAL_DISTRIBUTION_RATIO
+
+    def get_order(self, aBuf):
+        # for euc-TW encoding, we are interested
+        #   first  byte range: 0xc4 -- 0xfe
+        #   second byte range: 0xa1 -- 0xfe
+        # no validation needed here. State machine has done that
+        first_char = wrap_ord(aBuf[0])
+        if first_char >= 0xC4:
+            return 94 * (first_char - 0xC4) + wrap_ord(aBuf[1]) - 0xA1
+        else:
+            return -1
+
+
+class EUCKRDistributionAnalysis(CharDistributionAnalysis):
+    def __init__(self):
+        CharDistributionAnalysis.__init__(self)
+        self._mCharToFreqOrder = EUCKRCharToFreqOrder
+        self._mTableSize = EUCKR_TABLE_SIZE
+        self._mTypicalDistributionRatio = EUCKR_TYPICAL_DISTRIBUTION_RATIO
+
+    def get_order(self, aBuf):
+        # for euc-KR encoding, we are interested
+        #   first  byte range: 0xb0 -- 0xfe
+        #   second byte range: 0xa1 -- 0xfe
+        # no validation needed here. State machine has done that
+        first_char = wrap_ord(aBuf[0])
+        if first_char >= 0xB0:
+            return 94 * (first_char - 0xB0) + wrap_ord(aBuf[1]) - 0xA1
+        else:
+            return -1
+
+
+class GB2312DistributionAnalysis(CharDistributionAnalysis):
+    def __init__(self):
+        CharDistributionAnalysis.__init__(self)
+        self._mCharToFreqOrder = GB2312CharToFreqOrder
+        self._mTableSize = GB2312_TABLE_SIZE
+        self._mTypicalDistributionRatio = GB2312_TYPICAL_DISTRIBUTION_RATIO
+
+    def get_order(self, aBuf):
+        # for GB2312 encoding, we are interested
+        #  first  byte range: 0xb0 -- 0xfe
+        #  second byte range: 0xa1 -- 0xfe
+        # no validation needed here. State machine has done that
+        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
+        if (first_char >= 0xB0) and (second_char >= 0xA1):
+            return 94 * (first_char - 0xB0) + second_char - 0xA1
+        else:
+            return -1
+
+
+class Big5DistributionAnalysis(CharDistributionAnalysis):
+    def __init__(self):
+        CharDistributionAnalysis.__init__(self)
+        self._mCharToFreqOrder = Big5CharToFreqOrder
+        self._mTableSize = BIG5_TABLE_SIZE
+        self._mTypicalDistributionRatio = BIG5_TYPICAL_DISTRIBUTION_RATIO
+
+    def get_order(self, aBuf):
+        # for big5 encoding, we are interested
+        #   first  byte range: 0xa4 -- 0xfe
+        #   second byte range: 0x40 -- 0x7e , 0xa1 -- 0xfe
+        # no validation needed here. State machine has done that
+        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
+        if first_char >= 0xA4:
+            if second_char >= 0xA1:
+                return 157 * (first_char - 0xA4) + second_char - 0xA1 + 63
+            else:
+                return 157 * (first_char - 0xA4) + second_char - 0x40
+        else:
+            return -1
+
+
+class SJISDistributionAnalysis(CharDistributionAnalysis):
+    def __init__(self):
+        CharDistributionAnalysis.__init__(self)
+        self._mCharToFreqOrder = JISCharToFreqOrder
+        self._mTableSize = JIS_TABLE_SIZE
+        self._mTypicalDistributionRatio = JIS_TYPICAL_DISTRIBUTION_RATIO
+
+    def get_order(self, aBuf):
+        # for sjis encoding, we are interested
+        #   first  byte range: 0x81 -- 0x9f , 0xe0 -- 0xfe
+        #   second byte range: 0x40 -- 0x7e,  0x81 -- oxfe
+        # no validation needed here. State machine has done that
+        first_char, second_char = wrap_ord(aBuf[0]), wrap_ord(aBuf[1])
+        if (first_char >= 0x81) and (first_char <= 0x9F):
+            order = 188 * (first_char - 0x81)
+        elif (first_char >= 0xE0) and (first_char <= 0xEF):
+            order = 188 * (first_char - 0xE0 + 31)
+        else:
+            return -1
+        order = order + second_char - 0x40
+        if second_char > 0x7F:
+            order = -1
+        return order
+
+
+class EUCJPDistributionAnalysis(CharDistributionAnalysis):
+    def __init__(self):
+        CharDistributionAnalysis.__init__(self)
+        self._mCharToFreqOrder = JISCharToFreqOrder
+        self._mTableSize = JIS_TABLE_SIZE
+        self._mTypicalDistributionRatio = JIS_TYPICAL_DISTRIBUTION_RATIO
+
+    def get_order(self, aBuf):
+        # for euc-JP encoding, we are interested
+        #   first  byte range: 0xa0 -- 0xfe
+        #   second byte range: 0xa1 -- 0xfe
+        # no validation needed here. State machine has done that
+        char = wrap_ord(aBuf[0])
+        if char >= 0xA0:
+            return 94 * (char - 0xA1) + wrap_ord(aBuf[1]) - 0xa1
+        else:
+            return -1