CodeStubs contain their corresponding Isolate* now. (part 1)

src/arm/macro-assembler-arm.cc

 // Copyright 2012 the V8 project authors. All rights reserved.
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are
 // met:
 //
 //     * Redistributions of source code must retain the above copyright
 //       notice, this list of conditions and the following disclaimer.
 //     * Redistributions in binary form must reproduce the above
 //       copyright notice, this list of conditions and the following
 //       disclaimer in the documentation and/or other materials provided
@@ skipping 538 matching lines @@
   CheckPageFlag(object,
                 value,  // Used as scratch.
                 MemoryChunk::kPointersFromHereAreInterestingMask,
                 eq,
                 &done);
 
   // Record the actual write.
   if (lr_status == kLRHasNotBeenSaved) {
     push(lr);
   }
-  RecordWriteStub stub(object, value, address, remembered_set_action, fp_mode);
+  RecordWriteStub stub(isolate(), object, value, address, remembered_set_action,
+                       fp_mode);
   CallStub(&stub);
   if (lr_status == kLRHasNotBeenSaved) {
     pop(lr);
   }
 
   bind(&done);
 
   // Clobber clobbered registers when running with the debug-code flag
   // turned on to provoke errors.
   if (emit_debug_code()) {
@@ skipping 28 matching lines @@
   // Check for end of buffer.
   tst(scratch, Operand(StoreBuffer::kStoreBufferOverflowBit));
   if (and_then == kFallThroughAtEnd) {
     b(eq, &done);
   } else {
     ASSERT(and_then == kReturnAtEnd);
     Ret(eq);
   }
   push(lr);
   StoreBufferOverflowStub store_buffer_overflow =
-      StoreBufferOverflowStub(fp_mode);
+      StoreBufferOverflowStub(isolate(), fp_mode);
   CallStub(&store_buffer_overflow);
   pop(lr);
   bind(&done);
   if (and_then == kReturnAtEnd) {
     Ret();
   }
 }
 
 
 void MacroAssembler::PushFixedFrame(Register marker_reg) {
@@ skipping 713 matching lines @@
   ldrb(scratch, FieldMemOperand(scratch, Map::kInstanceTypeOffset));
   cmp(scratch, Operand(LAST_NAME_TYPE));
   b(hi, fail);
 }
 
 
 #ifdef ENABLE_DEBUGGER_SUPPORT
 void MacroAssembler::DebugBreak() {
   mov(r0, Operand::Zero());
   mov(r1, Operand(ExternalReference(Runtime::kDebugBreak, isolate())));
-  CEntryStub ces(1);
+  CEntryStub ces(isolate(), 1);
   ASSERT(AllowThisStubCall(&ces));
   Call(ces.GetCode(isolate()), RelocInfo::DEBUG_BREAK);
 }
 #endif
 
 
 void MacroAssembler::PushTryHandler(StackHandler::Kind kind,
                                     int handler_index) {
   // Adjust this code if not the case.
   STATIC_ASSERT(StackHandlerConstants::kSize == 5 * kPointerSize);
@@ skipping 1029 matching lines @@
     PushSafepointRegisters();
     PrepareCallCFunction(1, r0);
     mov(r0, Operand(ExternalReference::isolate_address(isolate())));
     CallCFunction(ExternalReference::log_enter_external_function(isolate()), 1);
     PopSafepointRegisters();
   }
 
   // Native call returns to the DirectCEntry stub which redirects to the
   // return address pushed on stack (could have moved after GC).
   // DirectCEntry stub itself is generated early and never moves.
-  DirectCEntryStub stub;
+  DirectCEntryStub stub(isolate());
   stub.GenerateCall(this, r3);
 
   if (FLAG_log_timer_events) {
     FrameScope frame(this, StackFrame::MANUAL);
     PushSafepointRegisters();
     PrepareCallCFunction(1, r0);
     mov(r0, Operand(ExternalReference::isolate_address(isolate())));
     CallCFunction(ExternalReference::log_leave_external_function(isolate()), 1);
     PopSafepointRegisters();
   }
@@ skipping 184 matching lines @@
                                        DwVfpRegister double_input) {
   Label done;
 
   TryInlineTruncateDoubleToI(result, double_input, &done);
 
   // If we fell through then inline version didn't succeed - call stub instead.
   push(lr);
   sub(sp, sp, Operand(kDoubleSize));  // Put input on stack.
   vstr(double_input, MemOperand(sp, 0));
 
-  DoubleToIStub stub(sp, result, 0, true, true);
+  DoubleToIStub stub(isolate(), sp, result, 0, true, true);
   CallStub(&stub);
 
   add(sp, sp, Operand(kDoubleSize));
   pop(lr);
 
   bind(&done);
 }
 
 
 void MacroAssembler::TruncateHeapNumberToI(Register result,
                                            Register object) {
   Label done;
   LowDwVfpRegister double_scratch = kScratchDoubleReg;
   ASSERT(!result.is(object));
 
   vldr(double_scratch,
        MemOperand(object, HeapNumber::kValueOffset - kHeapObjectTag));
   TryInlineTruncateDoubleToI(result, double_scratch, &done);
 
   // If we fell through then inline version didn't succeed - call stub instead.
   push(lr);
-  DoubleToIStub stub(object,
+  DoubleToIStub stub(isolate(),
+                     object,
                      result,
                      HeapNumber::kValueOffset - kHeapObjectTag,
                      true,
                      true);
   CallStub(&stub);
   pop(lr);
 
   bind(&done);
 }
 
@@ skipping 45 matching lines @@
     IllegalOperation(num_arguments);
     return;
   }
 
   // TODO(1236192): Most runtime routines don't need the number of
   // arguments passed in because it is constant. At some point we
   // should remove this need and make the runtime routine entry code
   // smarter.
   mov(r0, Operand(num_arguments));
   mov(r1, Operand(ExternalReference(f, isolate())));
-  CEntryStub stub(1, save_doubles);
+  CEntryStub stub(isolate(), 1, save_doubles);
   CallStub(&stub);
 }
 
 
 void MacroAssembler::CallExternalReference(const ExternalReference& ext,
                                            int num_arguments) {
   mov(r0, Operand(num_arguments));
   mov(r1, Operand(ext));
 
-  CEntryStub stub(1);
+  CEntryStub stub(isolate(), 1);
   CallStub(&stub);
 }
 
 
 void MacroAssembler::TailCallExternalReference(const ExternalReference& ext,
                                                int num_arguments,
                                                int result_size) {
   // TODO(1236192): Most runtime routines don't need the number of
   // arguments passed in because it is constant. At some point we
   // should remove this need and make the runtime routine entry code
@@ skipping 11 matching lines @@
                             result_size);
 }
 
 
 void MacroAssembler::JumpToExternalReference(const ExternalReference& builtin) {
 #if defined(__thumb__)
   // Thumb mode builtin.
   ASSERT((reinterpret_cast<intptr_t>(builtin.address()) & 1) == 1);
 #endif
   mov(r1, Operand(builtin));
-  CEntryStub stub(1);
+  CEntryStub stub(isolate(), 1);
   Jump(stub.GetCode(isolate()), RelocInfo::CODE_TARGET);
 }
 
 
 void MacroAssembler::InvokeBuiltin(Builtins::JavaScript id,
                                    InvokeFlag flag,
                                    const CallWrapper& call_wrapper) {
   // You can't call a builtin without a valid frame.
   ASSERT(flag == JUMP_FUNCTION || has_frame());
 
@@ skipping 1351 matching lines @@
     sub(result, result, Operand(dividend));
   }
   if (ms.shift() > 0) mov(result, Operand(result, ASR, ms.shift()));
   add(result, result, Operand(dividend, LSR, 31));
 }
 
 
 } }  // namespace v8::internal
 
 #endif  // V8_TARGET_ARCH_ARM