tests_lit/llvm2ice_tests/select-opt.ll - Issue 2433243003: Subzero, MIPS32: Remove --skip-unimplemented from lit tests

Side by Side Diff: tests_lit/llvm2ice_tests/select-opt.ll

Issue 2433243003: Subzero, MIPS32: Remove --skip-unimplemented from lit tests (Closed)

Patch Set: Created 4 years, 2 months ago

Use n/p to move between diff chunks; N/P to move between comments. Draft comments are only viewable by you.

Jump to:

« tests_lit/llvm2ice_tests/nacl-other-intrinsics.ll ('K') | « tests_lit/llvm2ice_tests/return_immediates.ll ('k') | tests_lit/llvm2ice_tests/shift.ll » ('j') | no next file with comments »

OLD	NEW
1 ; Simple test of the select instruction. The CHECK lines are only	1 ; Simple test of the select instruction. The CHECK lines are only

2 ; checking for basic instruction patterns that should be present	2 ; checking for basic instruction patterns that should be present

3 ; regardless of the optimization level, so there are no special OPTM1	3 ; regardless of the optimization level, so there are no special OPTM1

4 ; match lines.	4 ; match lines.

5	5

6 ; RUN: %if --need=target_X8632 --command %p2i --filetype=obj --disassemble \	6 ; RUN: %if --need=target_X8632 --command %p2i --filetype=obj --disassemble \

7 ; RUN: --target x8632 -i %s --args -O2 -allow-externally-defined-symbols \	7 ; RUN: --target x8632 -i %s --args -O2 -allow-externally-defined-symbols \

8 ; RUN: \| %if --need=target_X8632 --command FileCheck %s	8 ; RUN: \| %if --need=target_X8632 --command FileCheck %s

9 ; RUN: %if --need=target_X8632 --command %p2i --filetype=obj --disassemble \	9 ; RUN: %if --need=target_X8632 --command %p2i --filetype=obj --disassemble \

10 ; RUN: --target x8632 -i %s --args -Om1 -allow-externally-defined-symbols \	10 ; RUN: --target x8632 -i %s --args -Om1 -allow-externally-defined-symbols \

11 ; RUN: \| %if --need=target_X8632 --command FileCheck %s	11 ; RUN: \| %if --need=target_X8632 --command FileCheck %s

12	12

13 ; RUN: %if --need=target_ARM32 \	13 ; RUN: %if --need=target_ARM32 \

14 ; RUN: --command %p2i --filetype=obj \	14 ; RUN: --command %p2i --filetype=obj \

15 ; RUN: --disassemble --target arm32 -i %s --args -O2 \	15 ; RUN: --disassemble --target arm32 -i %s --args -O2 \

16 ; RUN: -allow-externally-defined-symbols \	16 ; RUN: -allow-externally-defined-symbols \

17 ; RUN: \| %if --need=target_ARM32 \	17 ; RUN: \| %if --need=target_ARM32 \

18 ; RUN: --command FileCheck --check-prefix ARM32 --check-prefix ARM32-O2 %s	18 ; RUN: --command FileCheck --check-prefix ARM32 --check-prefix ARM32-O2 %s

19 ; RUN: %if --need=target_ARM32 \	19 ; RUN: %if --need=target_ARM32 \

20 ; RUN: --command %p2i --filetype=obj \	20 ; RUN: --command %p2i --filetype=obj \

21 ; RUN: --disassemble --target arm32 -i %s --args -Om1 \	21 ; RUN: --disassemble --target arm32 -i %s --args -Om1 \

22 ; RUN: -allow-externally-defined-symbols \	22 ; RUN: -allow-externally-defined-symbols \

23 ; RUN: \| %if --need=target_ARM32 \	23 ; RUN: \| %if --need=target_ARM32 \

24 ; RUN: --command FileCheck --check-prefix ARM32 --check-prefix ARM32-OM1 %s	24 ; RUN: --command FileCheck --check-prefix ARM32 --check-prefix ARM32-OM1 %s

25	25

26 ; RUN: %if --need=target_MIPS32 --need=allow_dump \	26 ; RUN: %if --need=target_MIPS32 --need=allow_dump \

27 ; RUN: --command %p2i --filetype=asm --assemble \	27 ; RUN: --command %p2i --filetype=asm --assemble \

28 ; RUN: --disassemble --target mips32 -i %s --args -Om1 \	28 ; RUN: --disassemble --target mips32 -i %s --args -Om1 \

29 ; RUN: -allow-externally-defined-symbols -skip-unimplemented \	29 ; RUN: -allow-externally-defined-symbols \

30 ; RUN: \| %if --need=target_MIPS32 --need=allow_dump \	30 ; RUN: \| %if --need=target_MIPS32 --need=allow_dump \

31 ; RUN: --command FileCheck --check-prefix MIPS32 %s	31 ; RUN: --command FileCheck --check-prefix MIPS32 %s

32	32

33 ; RUN: %if --need=target_MIPS32 --need=allow_dump \	33 ; RUN: %if --need=target_MIPS32 --need=allow_dump \

34 ; RUN: --command %p2i --filetype=asm --assemble \	34 ; RUN: --command %p2i --filetype=asm --assemble \

35 ; RUN: --disassemble --target mips32 -i %s --args -O2 \	35 ; RUN: --disassemble --target mips32 -i %s --args -O2 \

36 ; RUN: -allow-externally-defined-symbols -skip-unimplemented \	36 ; RUN: -allow-externally-defined-symbols \

37 ; RUN: \| %if --need=target_MIPS32 --need=allow_dump \	37 ; RUN: \| %if --need=target_MIPS32 --need=allow_dump \

38 ; RUN: --command FileCheck --check-prefix MIPS32 %s	38 ; RUN: --command FileCheck --check-prefix MIPS32 %s

39	39

40 define internal void @testSelect(i32 %a, i32 %b) {	40 define internal void @testSelect(i32 %a, i32 %b) {

41 entry:	41 entry:

42 %cmp = icmp slt i32 %a, %b	42 %cmp = icmp slt i32 %a, %b

43 %cond = select i1 %cmp, i32 %a, i32 %b	43 %cond = select i1 %cmp, i32 %a, i32 %b

44 tail call void @useInt(i32 %cond)	44 tail call void @useInt(i32 %cond)

45 %cmp1 = icmp sgt i32 %a, %b	45 %cmp1 = icmp sgt i32 %a, %b

46 %cond2 = select i1 %cmp1, i32 10, i32 20	46 %cond2 = select i1 %cmp1, i32 10, i32 20

(...skipping 54 matching lines...) Expand 10 before \| Expand all \| Expand 10 after Loading...
101 %cond = select i1 true, i64 %a, i64 %b	101 %cond = select i1 true, i64 %a, i64 %b

102 ret i64 %cond	102 ret i64 %cond

103 }	103 }

104 ; CHECK-LABEL: testSelectImm64	104 ; CHECK-LABEL: testSelectImm64

105 ; CHECK-NOT: cmp 0x{{[0-9a-f]+}},	105 ; CHECK-NOT: cmp 0x{{[0-9a-f]+}},

106 ; ARM32-LABEL: testSelectImm64	106 ; ARM32-LABEL: testSelectImm64

107 ; ARM32-NOT: cmp #{{.*}},	107 ; ARM32-NOT: cmp #{{.*}},

108 ; MIPS32-LABEL: testSelectImm64	108 ; MIPS32-LABEL: testSelectImm64

109 ; MIPS32: movn	109 ; MIPS32: movn

110 ; MIPS32: movn	110 ; MIPS32: movn

OLD	NEW