Adds an API for setting the stack limit per-thread.

src/execution.cc

 // Copyright 2006-2008 the V8 project authors. All rights reserved.
 // Redistribution and use in source and binary forms, with or without
 // modification, are permitted provided that the following conditions are
 // met:
 //
 //     * Redistributions of source code must retain the above copyright
 //       notice, this list of conditions and the following disclaimer.
 //     * Redistributions in binary form must reproduce the above
 //       copyright notice, this list of conditions and the following
 //       disclaimer in the documentation and/or other materials provided
@@ skipping 204 matching lines @@
 
 // Static state for stack guards.
 StackGuard::ThreadLocal StackGuard::thread_local_;
 
 
 StackGuard::StackGuard() {
   // NOTE: Overall the StackGuard code assumes that the stack grows towards
   // lower addresses.
   ExecutionAccess access;
   if (thread_local_.nesting_++ == 0) {
-    // Initial StackGuard is being set. We will set the stack limits based on
-    // the current stack pointer allowing the stack to grow kLimitSize from
-    // here.
+    // Initial StackGuard is being set.
 
     // Ensure that either the stack limits are unset (kIllegalLimit) or that
     // they indicate a pending interruption. The interrupt limit will be
     // temporarily reset through the code below and reestablished if the
     // interrupt flags indicate that an interrupt is pending.
     ASSERT(thread_local_.jslimit_ == kIllegalLimit ||
            (thread_local_.jslimit_ == kInterruptLimit &&
             thread_local_.interrupt_flags_ != 0));
     ASSERT(thread_local_.climit_ == kIllegalLimit ||
            (thread_local_.climit_ == kInterruptLimit &&
             thread_local_.interrupt_flags_ != 0));
 
-    uintptr_t limit = GENERATED_CODE_STACK_LIMIT(kLimitSize);
-    thread_local_.initial_jslimit_ = thread_local_.jslimit_ = limit;
-    Heap::SetStackLimit(limit);
-    // NOTE: The check for overflow is not safe as there is no guarantee that
-    // the running thread has its stack in all memory up to address 0x00000000.
-    thread_local_.initial_climit_ = thread_local_.climit_ =
-        reinterpret_cast<uintptr_t>(this) >= kLimitSize ?
-            reinterpret_cast<uintptr_t>(this) - kLimitSize : 0;
+    if (thread_local_.initial_jslimit_ == kIllegalLimit ||
+        thread_local_.initial_climit_ == kIllegalLimit) {
+      ASSERT(thread_local_.initial_jslimit_ == kIllegalLimit &&
+             thread_local_.initial_climit_ == kIllegalLimit);
 
-    if (thread_local_.interrupt_flags_ != 0) {
-      set_limits(kInterruptLimit, access);
+      // We will set the stack limits based on the current stack
+      // pointer allowing the stack to grow kLimitSize from here.
+
+      // Compute default limit, checking for underflow.
+      uintptr_t limit =
+          reinterpret_cast<uintptr_t>(this) >= kLimitSize ?
+              reinterpret_cast<uintptr_t>(this) - kLimitSize : 0;
+
+      thread_local_.initial_jslimit_ = GENERATED_CODE_STACK_LIMIT(limit);
+      thread_local_.initial_climit_ = limit;
+    }
+
+    if (thread_local_.interrupt_flags_ == 0) {
+      set_limits(thread_local_.initial_jslimit_, thread_local_.initial_climit_,
+                 access);
     }
   }
   // Ensure that proper limits have been set.
   ASSERT(thread_local_.jslimit_ != kIllegalLimit &&
          thread_local_.climit_ != kIllegalLimit);
   ASSERT(thread_local_.initial_jslimit_ != kIllegalLimit &&
          thread_local_.initial_climit_ != kIllegalLimit);
 }
 
 
 StackGuard::~StackGuard() {
   ExecutionAccess access;
-  if (--thread_local_.nesting_ == 0) {
-    set_limits(kIllegalLimit, access);
+  if (--thread_local_.nesting_ == 0 &&
+      thread_local_.interrupt_flags_ == 0) {
+    set_illegal_limit(access);
   }
 }
 
 
 bool StackGuard::IsStackOverflow() {
   ExecutionAccess access;
   return (thread_local_.jslimit_ != kInterruptLimit &&
           thread_local_.climit_ != kInterruptLimit);
 }
 
 
 void StackGuard::EnableInterrupts() {
   ExecutionAccess access;
   if (IsSet(access)) {
-    set_limits(kInterruptLimit, access);
+    set_interrupt_limit(access);
   }
 }
 
 
 void StackGuard::SetStackLimit(uintptr_t limit) {
   ExecutionAccess access;
-  // If the current limits are special (eg due to a pending interrupt) then
-  // leave them alone.
-  if (thread_local_.jslimit_ == thread_local_.initial_jslimit_) {
-    thread_local_.jslimit_ = limit;
-    Heap::SetStackLimit(limit);
+  thread_local_.initial_jslimit_ = GENERATED_CODE_STACK_LIMIT(limit);
+  thread_local_.initial_climit_ = limit;
+
+  // If a StackGuard is active (nesting_ > 0) and not interrupted set
+  // the limit directly. Otherwise the limit will be established by
+  // the first StackGuard.
+  if (thread_local_.nesting_ > 0 &&
+      thread_local_.interrupt_flags_ == 0) {
+    set_limits(thread_local_.initial_jslimit_, thread_local_.initial_climit_,
+               access);
   }
-  if (thread_local_.climit_ == thread_local_.initial_climit_) {
-    thread_local_.climit_ = limit;
-  }
-  thread_local_.initial_climit_ = limit;
-  thread_local_.initial_jslimit_ = limit;
 }
 
 
 void StackGuard::DisableInterrupts() {
   ExecutionAccess access;
   reset_limits(access);
 }
 
 
 bool StackGuard::IsSet(const ExecutionAccess& lock) {
   return thread_local_.interrupt_flags_ != 0;
 }
 
 
 bool StackGuard::IsInterrupted() {
   ExecutionAccess access;
   return thread_local_.interrupt_flags_ & INTERRUPT;
 }
 
 
 void StackGuard::Interrupt() {
   ExecutionAccess access;
   thread_local_.interrupt_flags_ |= INTERRUPT;
-  set_limits(kInterruptLimit, access);
+  set_interrupt_limit(access);
 }
 
 
 bool StackGuard::IsPreempted() {
   ExecutionAccess access;
   return thread_local_.interrupt_flags_ & PREEMPT;
 }
 
 
 void StackGuard::Preempt() {
   ExecutionAccess access;
   thread_local_.interrupt_flags_ |= PREEMPT;
-  set_limits(kInterruptLimit, access);
+  set_interrupt_limit(access);
 }
 
 
 bool StackGuard::IsTerminateExecution() {
   ExecutionAccess access;
   return thread_local_.interrupt_flags_ & TERMINATE;
 }
 
 
 void StackGuard::TerminateExecution() {
   ExecutionAccess access;
   thread_local_.interrupt_flags_ |= TERMINATE;
-  set_limits(kInterruptLimit, access);
+  set_interrupt_limit(access);
 }
 
 
 #ifdef ENABLE_DEBUGGER_SUPPORT
 bool StackGuard::IsDebugBreak() {
   ExecutionAccess access;
   return thread_local_.interrupt_flags_ & DEBUGBREAK;
 }
 
 
 void StackGuard::DebugBreak() {
   ExecutionAccess access;
   thread_local_.interrupt_flags_ |= DEBUGBREAK;
-  set_limits(kInterruptLimit, access);
+  set_interrupt_limit(access);
 }
 
 
 bool StackGuard::IsDebugCommand() {
   ExecutionAccess access;
   return thread_local_.interrupt_flags_ & DEBUGCOMMAND;
 }
 
 
 void StackGuard::DebugCommand() {
   if (FLAG_debugger_auto_break) {
     ExecutionAccess access;
     thread_local_.interrupt_flags_ |= DEBUGCOMMAND;
-    set_limits(kInterruptLimit, access);
+    set_interrupt_limit(access);
   }
 }
 #endif
 
 void StackGuard::Continue(InterruptFlag after_what) {
   ExecutionAccess access;
   thread_local_.interrupt_flags_ &= ~static_cast<int>(after_what);
   if (thread_local_.interrupt_flags_ == 0) {
     reset_limits(access);
   }
@@ skipping 15 matching lines @@
 
 
 char* StackGuard::RestoreStackGuard(char* from) {
   ExecutionAccess access;
   memcpy(reinterpret_cast<char*>(&thread_local_), from, sizeof(ThreadLocal));
   Heap::SetStackLimit(thread_local_.jslimit_);
   return from + sizeof(ThreadLocal);
 }
 
 
+void StackGuard::InitThread(const ExecutionAccess& lock) {
+  // new threads should configure their own stack limits
+  ThreadLocal blank;
+  thread_local_ = blank;
+}
+
+
 // --- C a l l s   t o   n a t i v e s ---
 
 #define RETURN_NATIVE_CALL(name, argc, argv, has_pending_exception) \
   do {                                                              \
     Object** args[argc] = argv;                                     \
     ASSERT(has_pending_exception != NULL);                          \
     return Call(Top::name##_fun(), Top::builtins(), argc, args,     \
                 has_pending_exception);                             \
   } while (false)
 
@@ skipping 265 matching lines @@
   // All allocation spaces other than NEW_SPACE have the same effect.
   Heap::CollectAllGarbage(false);
   return v8::Undefined();
 }
 
 
 static GCExtension kGCExtension;
 v8::DeclareExtension kGCExtensionDeclaration(&kGCExtension);
 
 } }  // namespace v8::internal