Hydrogenisation of binops

src/ia32/code-stubs-ia32.cc

Index: src/ia32/code-stubs-ia32.cc
diff --git a/src/ia32/code-stubs-ia32.cc b/src/ia32/code-stubs-ia32.cc
index 83613ccc86a041c8a360232cacee3c76eee09698..56798d32c1978329060653e49aac8801489de9be 100644
--- a/src/ia32/code-stubs-ia32.cc
+++ b/src/ia32/code-stubs-ia32.cc
@@ -293,6 +293,18 @@ void ElementsTransitionAndStoreStub::InitializeInterfaceDescriptor(
 }
 
 
+void BinaryOpStub::InitializeInterfaceDescriptor(
+    Isolate* isolate,
+    CodeStubInterfaceDescriptor* descriptor) {
+  static Register registers[] = { edx, eax };
+  descriptor->register_param_count_ = 2;
+  descriptor->register_params_ = registers;
+  descriptor->deoptimization_handler_ = FUNCTION_ADDR(BinaryOpIC_Miss);
+  descriptor->SetMissHandler(
+      ExternalReference(IC_Utility(IC::kBinaryOpIC_Miss), isolate));
+}
+
+
 #define __ ACCESS_MASM(masm)
 
 
@@ -480,18 +492,6 @@ class FloatingPointHelper : public AllStatic {
   // on FPU stack.
   static void LoadFloatOperand(MacroAssembler* masm, Register number);
 
-  // Code pattern for loading floating point values. Input values must
-  // be either smi or heap number objects (fp values). Requirements:
-  // operand_1 on TOS+1 or in edx, operand_2 on TOS+2 or in eax.
-  // Returns operands as floating point numbers on FPU stack.
-  static void LoadFloatOperands(MacroAssembler* masm,
-                                Register scratch,
-                                ArgLocation arg_location = ARGS_ON_STACK);
-
-  // Similar to LoadFloatOperand but assumes that both operands are smis.
-  // Expects operands in edx, eax.
-  static void LoadFloatSmis(MacroAssembler* masm, Register scratch);
-
   // Test if operands are smi or number objects (fp). Requirements:
   // operand_1 in eax, operand_2 in edx; falls through on float
   // operands, jumps to the non_float label otherwise.
@@ -499,32 +499,11 @@ class FloatingPointHelper : public AllStatic {
                                  Label* non_float,
                                  Register scratch);
 
-  // Takes the operands in edx and eax and loads them as integers in eax
-  // and ecx.
-  static void LoadUnknownsAsIntegers(MacroAssembler* masm,
-                                     bool use_sse3,
-                                     BinaryOpIC::TypeInfo left_type,
-                                     BinaryOpIC::TypeInfo right_type,
-                                     Label* operand_conversion_failure);
-
   // Test if operands are numbers (smi or HeapNumber objects), and load
   // them into xmm0 and xmm1 if they are.  Jump to label not_numbers if
   // either operand is not a number.  Operands are in edx and eax.
   // Leaves operands unchanged.
   static void LoadSSE2Operands(MacroAssembler* masm, Label* not_numbers);
-
-  // Similar to LoadSSE2Operands but assumes that both operands are smis.
-  // Expects operands in edx, eax.
-  static void LoadSSE2Smis(MacroAssembler* masm, Register scratch);
-
-  // Checks that |operand| has an int32 value. If |int32_result| is different
-  // from |scratch|, it will contain that int32 value.
-  static void CheckSSE2OperandIsInt32(MacroAssembler* masm,
-                                      Label* non_int32,
-                                      XMMRegister operand,
-                                      Register int32_result,
-                                      Register scratch,
-                                      XMMRegister xmm_scratch);
 };
 
 
@@ -668,1259 +647,6 @@ void DoubleToIStub::Generate(MacroAssembler* masm) {
 }
 
 
-void BinaryOpStub::Initialize() {
-  platform_specific_bit_ = CpuFeatures::IsSupported(SSE3);
-}
-
-
-void BinaryOpStub::GenerateTypeTransition(MacroAssembler* masm) {
-  __ pop(ecx);  // Save return address.
-  __ push(edx);
-  __ push(eax);
-  // Left and right arguments are now on top.
-  __ push(Immediate(Smi::FromInt(MinorKey())));
-
-  __ push(ecx);  // Push return address.
-
-  // Patch the caller to an appropriate specialized stub and return the
-  // operation result to the caller of the stub.
-  __ TailCallExternalReference(
-      ExternalReference(IC_Utility(IC::kBinaryOp_Patch),
-                        masm->isolate()),
-      3,
-      1);
-}
-
-
-// Prepare for a type transition runtime call when the args are already on
-// the stack, under the return address.
-void BinaryOpStub::GenerateTypeTransitionWithSavedArgs(MacroAssembler* masm) {
-  __ pop(ecx);  // Save return address.
-  // Left and right arguments are already on top of the stack.
-  __ push(Immediate(Smi::FromInt(MinorKey())));
-
-  __ push(ecx);  // Push return address.
-
-  // Patch the caller to an appropriate specialized stub and return the
-  // operation result to the caller of the stub.
-  __ TailCallExternalReference(
-      ExternalReference(IC_Utility(IC::kBinaryOp_Patch),
-                        masm->isolate()),
-      3,
-      1);
-}
-
-
-static void BinaryOpStub_GenerateRegisterArgsPop(MacroAssembler* masm) {
-  __ pop(ecx);
-  __ pop(eax);
-  __ pop(edx);
-  __ push(ecx);
-}
-
-
-static void BinaryOpStub_GenerateSmiCode(
-    MacroAssembler* masm,
-    Label* slow,
-    BinaryOpStub::SmiCodeGenerateHeapNumberResults allow_heapnumber_results,
-    Token::Value op) {
-  // 1. Move arguments into edx, eax except for DIV and MOD, which need the
-  // dividend in eax and edx free for the division.  Use eax, ebx for those.
-  Comment load_comment(masm, "-- Load arguments");
-  Register left = edx;
-  Register right = eax;
-  if (op == Token::DIV || op == Token::MOD) {
-    left = eax;
-    right = ebx;
-    __ mov(ebx, eax);
-    __ mov(eax, edx);
-  }
-
-
-  // 2. Prepare the smi check of both operands by oring them together.
-  Comment smi_check_comment(masm, "-- Smi check arguments");
-  Label not_smis;
-  Register combined = ecx;
-  ASSERT(!left.is(combined) && !right.is(combined));
-  switch (op) {
-    case Token::BIT_OR:
-      // Perform the operation into eax and smi check the result.  Preserve
-      // eax in case the result is not a smi.
-      ASSERT(!left.is(ecx) && !right.is(ecx));
-      __ mov(ecx, right);
-      __ or_(right, left);  // Bitwise or is commutative.
-      combined = right;
-      break;
-
-    case Token::BIT_XOR:
-    case Token::BIT_AND:
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-    case Token::MOD:
-      __ mov(combined, right);
-      __ or_(combined, left);
-      break;
-
-    case Token::SHL:
-    case Token::SAR:
-    case Token::SHR:
-      // Move the right operand into ecx for the shift operation, use eax
-      // for the smi check register.
-      ASSERT(!left.is(ecx) && !right.is(ecx));
-      __ mov(ecx, right);
-      __ or_(right, left);
-      combined = right;
-      break;
-
-    default:
-      break;
-  }
-
-  // 3. Perform the smi check of the operands.
-  STATIC_ASSERT(kSmiTag == 0);  // Adjust zero check if not the case.
-  __ JumpIfNotSmi(combined, &not_smis);
-
-  // 4. Operands are both smis, perform the operation leaving the result in
-  // eax and check the result if necessary.
-  Comment perform_smi(masm, "-- Perform smi operation");
-  Label use_fp_on_smis;
-  switch (op) {
-    case Token::BIT_OR:
-      // Nothing to do.
-      break;
-
-    case Token::BIT_XOR:
-      ASSERT(right.is(eax));
-      __ xor_(right, left);  // Bitwise xor is commutative.
-      break;
-
-    case Token::BIT_AND:
-      ASSERT(right.is(eax));
-      __ and_(right, left);  // Bitwise and is commutative.
-      break;
-
-    case Token::SHL:
-      // Remove tags from operands (but keep sign).
-      __ SmiUntag(left);
-      __ SmiUntag(ecx);
-      // Perform the operation.
-      __ shl_cl(left);
-      // Check that the *signed* result fits in a smi.
-      __ cmp(left, 0xc0000000);
-      __ j(sign, &use_fp_on_smis);
-      // Tag the result and store it in register eax.
-      __ SmiTag(left);
-      __ mov(eax, left);
-      break;
-
-    case Token::SAR:
-      // Remove tags from operands (but keep sign).
-      __ SmiUntag(left);
-      __ SmiUntag(ecx);
-      // Perform the operation.
-      __ sar_cl(left);
-      // Tag the result and store it in register eax.
-      __ SmiTag(left);
-      __ mov(eax, left);
-      break;
-
-    case Token::SHR:
-      // Remove tags from operands (but keep sign).
-      __ SmiUntag(left);
-      __ SmiUntag(ecx);
-      // Perform the operation.
-      __ shr_cl(left);
-      // Check that the *unsigned* result fits in a smi.
-      // Neither of the two high-order bits can be set:
-      // - 0x80000000: high bit would be lost when smi tagging.
-      // - 0x40000000: this number would convert to negative when
-      // Smi tagging these two cases can only happen with shifts
-      // by 0 or 1 when handed a valid smi.
-      __ test(left, Immediate(0xc0000000));
-      __ j(not_zero, &use_fp_on_smis);
-      // Tag the result and store it in register eax.
-      __ SmiTag(left);
-      __ mov(eax, left);
-      break;
-
-    case Token::ADD:
-      ASSERT(right.is(eax));
-      __ add(right, left);  // Addition is commutative.
-      __ j(overflow, &use_fp_on_smis);
-      break;
-
-    case Token::SUB:
-      __ sub(left, right);
-      __ j(overflow, &use_fp_on_smis);
-      __ mov(eax, left);
-      break;
-
-    case Token::MUL:
-      // If the smi tag is 0 we can just leave the tag on one operand.
-      STATIC_ASSERT(kSmiTag == 0);  // Adjust code below if not the case.
-      // We can't revert the multiplication if the result is not a smi
-      // so save the right operand.
-      __ mov(ebx, right);
-      // Remove tag from one of the operands (but keep sign).
-      __ SmiUntag(right);
-      // Do multiplication.
-      __ imul(right, left);  // Multiplication is commutative.
-      __ j(overflow, &use_fp_on_smis);
-      // Check for negative zero result.  Use combined = left | right.
-      __ NegativeZeroTest(right, combined, &use_fp_on_smis);
-      break;
-
-    case Token::DIV:
-      // We can't revert the division if the result is not a smi so
-      // save the left operand.
-      __ mov(edi, left);
-      // Check for 0 divisor.
-      __ test(right, right);
-      __ j(zero, &use_fp_on_smis);
-      // Sign extend left into edx:eax.
-      ASSERT(left.is(eax));
-      __ cdq();
-      // Divide edx:eax by right.
-      __ idiv(right);
-      // Check for the corner case of dividing the most negative smi by
-      // -1. We cannot use the overflow flag, since it is not set by idiv
-      // instruction.
-      STATIC_ASSERT(kSmiTag == 0 && kSmiTagSize == 1);
-      __ cmp(eax, 0x40000000);
-      __ j(equal, &use_fp_on_smis);
-      // Check for negative zero result.  Use combined = left | right.
-      __ NegativeZeroTest(eax, combined, &use_fp_on_smis);
-      // Check that the remainder is zero.
-      __ test(edx, edx);
-      __ j(not_zero, &use_fp_on_smis);
-      // Tag the result and store it in register eax.
-      __ SmiTag(eax);
-      break;
-
-    case Token::MOD:
-      // Check for 0 divisor.
-      __ test(right, right);
-      __ j(zero, &not_smis);
-
-      // Sign extend left into edx:eax.
-      ASSERT(left.is(eax));
-      __ cdq();
-      // Divide edx:eax by right.
-      __ idiv(right);
-      // Check for negative zero result.  Use combined = left | right.
-      __ NegativeZeroTest(edx, combined, slow);
-      // Move remainder to register eax.
-      __ mov(eax, edx);
-      break;
-
-    default:
-      UNREACHABLE();
-  }
-
-  // 5. Emit return of result in eax.  Some operations have registers pushed.
-  switch (op) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-      __ ret(0);
-      break;
-    case Token::MOD:
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      __ ret(2 * kPointerSize);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  // 6. For some operations emit inline code to perform floating point
-  // operations on known smis (e.g., if the result of the operation
-  // overflowed the smi range).
-  if (allow_heapnumber_results == BinaryOpStub::NO_HEAPNUMBER_RESULTS) {
-    __ bind(&use_fp_on_smis);
-    switch (op) {
-      // Undo the effects of some operations, and some register moves.
-      case Token::SHL:
-        // The arguments are saved on the stack, and only used from there.
-        break;
-      case Token::ADD:
-        // Revert right = right + left.
-        __ sub(right, left);
-        break;
-      case Token::SUB:
-        // Revert left = left - right.
-        __ add(left, right);
-        break;
-      case Token::MUL:
-        // Right was clobbered but a copy is in ebx.
-        __ mov(right, ebx);
-        break;
-      case Token::DIV:
-        // Left was clobbered but a copy is in edi.  Right is in ebx for
-        // division.  They should be in eax, ebx for jump to not_smi.
-        __ mov(eax, edi);
-        break;
-      default:
-        // No other operators jump to use_fp_on_smis.
-        break;
-    }
-    __ jmp(&not_smis);
-  } else {
-    ASSERT(allow_heapnumber_results == BinaryOpStub::ALLOW_HEAPNUMBER_RESULTS);
-    switch (op) {
-      case Token::SHL:
-      case Token::SHR: {
-        Comment perform_float(masm, "-- Perform float operation on smis");
-        __ bind(&use_fp_on_smis);
-        // Result we want is in left == edx, so we can put the allocated heap
-        // number in eax.
-        __ AllocateHeapNumber(eax, ecx, ebx, slow);
-        // Store the result in the HeapNumber and return.
-        // It's OK to overwrite the arguments on the stack because we
-        // are about to return.
-        if (op == Token::SHR) {
-          __ mov(Operand(esp, 1 * kPointerSize), left);
-          __ mov(Operand(esp, 2 * kPointerSize), Immediate(0));
-          __ fild_d(Operand(esp, 1 * kPointerSize));
-          __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-        } else {
-          ASSERT_EQ(Token::SHL, op);
-          if (CpuFeatures::IsSupported(SSE2)) {
-            CpuFeatureScope use_sse2(masm, SSE2);
-            __ Cvtsi2sd(xmm0, left);
-            __ movdbl(FieldOperand(eax, HeapNumber::kValueOffset), xmm0);
-          } else {
-            __ mov(Operand(esp, 1 * kPointerSize), left);
-            __ fild_s(Operand(esp, 1 * kPointerSize));
-            __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-          }
-        }
-        __ ret(2 * kPointerSize);
-        break;
-      }
-
-      case Token::ADD:
-      case Token::SUB:
-      case Token::MUL:
-      case Token::DIV: {
-        Comment perform_float(masm, "-- Perform float operation on smis");
-        __ bind(&use_fp_on_smis);
-        // Restore arguments to edx, eax.
-        switch (op) {
-          case Token::ADD:
-            // Revert right = right + left.
-            __ sub(right, left);
-            break;
-          case Token::SUB:
-            // Revert left = left - right.
-            __ add(left, right);
-            break;
-          case Token::MUL:
-            // Right was clobbered but a copy is in ebx.
-            __ mov(right, ebx);
-            break;
-          case Token::DIV:
-            // Left was clobbered but a copy is in edi.  Right is in ebx for
-            // division.
-            __ mov(edx, edi);
-            __ mov(eax, right);
-            break;
-          default: UNREACHABLE();
-            break;
-        }
-        __ AllocateHeapNumber(ecx, ebx, no_reg, slow);
-        if (CpuFeatures::IsSupported(SSE2)) {
-          CpuFeatureScope use_sse2(masm, SSE2);
-          FloatingPointHelper::LoadSSE2Smis(masm, ebx);
-          switch (op) {
-            case Token::ADD: __ addsd(xmm0, xmm1); break;
-            case Token::SUB: __ subsd(xmm0, xmm1); break;
-            case Token::MUL: __ mulsd(xmm0, xmm1); break;
-            case Token::DIV: __ divsd(xmm0, xmm1); break;
-            default: UNREACHABLE();
-          }
-          __ movdbl(FieldOperand(ecx, HeapNumber::kValueOffset), xmm0);
-        } else {  // SSE2 not available, use FPU.
-          FloatingPointHelper::LoadFloatSmis(masm, ebx);
-          switch (op) {
-            case Token::ADD: __ faddp(1); break;
-            case Token::SUB: __ fsubp(1); break;
-            case Token::MUL: __ fmulp(1); break;
-            case Token::DIV: __ fdivp(1); break;
-            default: UNREACHABLE();
-          }
-          __ fstp_d(FieldOperand(ecx, HeapNumber::kValueOffset));
-        }
-        __ mov(eax, ecx);
-        __ ret(0);
-        break;
-      }
-
-      default:
-        break;
-    }
-  }
-
-  // 7. Non-smi operands, fall out to the non-smi code with the operands in
-  // edx and eax.
-  Comment done_comment(masm, "-- Enter non-smi code");
-  __ bind(&not_smis);
-  switch (op) {
-    case Token::BIT_OR:
-    case Token::SHL:
-    case Token::SAR:
-    case Token::SHR:
-      // Right operand is saved in ecx and eax was destroyed by the smi
-      // check.
-      __ mov(eax, ecx);
-      break;
-
-    case Token::DIV:
-    case Token::MOD:
-      // Operands are in eax, ebx at this point.
-      __ mov(edx, eax);
-      __ mov(eax, ebx);
-      break;
-
-    default:
-      break;
-  }
-}
-
-
-void BinaryOpStub::GenerateSmiStub(MacroAssembler* masm) {
-  Label right_arg_changed, call_runtime;
-
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-      break;
-    case Token::MOD:
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      GenerateRegisterArgsPush(masm);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  if (op_ == Token::MOD && encoded_right_arg_.has_value) {
-    // It is guaranteed that the value will fit into a Smi, because if it
-    // didn't, we wouldn't be here, see BinaryOp_Patch.
-    __ cmp(eax, Immediate(Smi::FromInt(fixed_right_arg_value())));
-    __ j(not_equal, &right_arg_changed);
-  }
-
-  if (result_type_ == BinaryOpIC::UNINITIALIZED ||
-      result_type_ == BinaryOpIC::SMI) {
-    BinaryOpStub_GenerateSmiCode(
-        masm, &call_runtime, NO_HEAPNUMBER_RESULTS, op_);
-  } else {
-    BinaryOpStub_GenerateSmiCode(
-        masm, &call_runtime, ALLOW_HEAPNUMBER_RESULTS, op_);
-  }
-
-  // Code falls through if the result is not returned as either a smi or heap
-  // number.
-  __ bind(&right_arg_changed);
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-      GenerateTypeTransition(masm);
-      break;
-    case Token::MOD:
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      GenerateTypeTransitionWithSavedArgs(masm);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  __ bind(&call_runtime);
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-      break;
-    case Token::MOD:
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      BinaryOpStub_GenerateRegisterArgsPop(masm);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  {
-    FrameScope scope(masm, StackFrame::INTERNAL);
-    __ push(edx);
-    __ push(eax);
-    GenerateCallRuntime(masm);
-  }
-  __ ret(0);
-}
-
-
-void BinaryOpStub::GenerateBothStringStub(MacroAssembler* masm) {
-  Label call_runtime;
-  ASSERT(left_type_ == BinaryOpIC::STRING && right_type_ == BinaryOpIC::STRING);
-  ASSERT(op_ == Token::ADD);
-  // If both arguments are strings, call the string add stub.
-  // Otherwise, do a transition.
-
-  // Registers containing left and right operands respectively.
-  Register left = edx;
-  Register right = eax;
-
-  // Test if left operand is a string.
-  __ JumpIfSmi(left, &call_runtime, Label::kNear);
-  __ CmpObjectType(left, FIRST_NONSTRING_TYPE, ecx);
-  __ j(above_equal, &call_runtime, Label::kNear);
-
-  // Test if right operand is a string.
-  __ JumpIfSmi(right, &call_runtime, Label::kNear);
-  __ CmpObjectType(right, FIRST_NONSTRING_TYPE, ecx);
-  __ j(above_equal, &call_runtime, Label::kNear);
-
-  StringAddStub string_add_stub(
-      (StringAddFlags)(STRING_ADD_CHECK_NONE | STRING_ADD_ERECT_FRAME));
-  GenerateRegisterArgsPush(masm);
-  __ TailCallStub(&string_add_stub);
-
-  __ bind(&call_runtime);
-  GenerateTypeTransition(masm);
-}
-
-
-static void BinaryOpStub_GenerateHeapResultAllocation(MacroAssembler* masm,
-                                                      Label* alloc_failure,
-                                                      OverwriteMode mode);
-
-
-// Input:
-//    edx: left operand (tagged)
-//    eax: right operand (tagged)
-// Output:
-//    eax: result (tagged)
-void BinaryOpStub::GenerateInt32Stub(MacroAssembler* masm) {
-  Label call_runtime;
-  ASSERT(Max(left_type_, right_type_) == BinaryOpIC::INT32);
-
-  // Floating point case.
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-    case Token::MOD: {
-      Label not_floats, not_int32, right_arg_changed;
-      if (CpuFeatures::IsSupported(SSE2)) {
-        CpuFeatureScope use_sse2(masm, SSE2);
-        // It could be that only SMIs have been seen at either the left
-        // or the right operand. For precise type feedback, patch the IC
-        // again if this changes.
-        // In theory, we would need the same check in the non-SSE2 case,
-        // but since we don't support Crankshaft on such hardware we can
-        // afford not to care about precise type feedback.
-        if (left_type_ == BinaryOpIC::SMI) {
-          __ JumpIfNotSmi(edx, &not_int32);
-        }
-        if (right_type_ == BinaryOpIC::SMI) {
-          __ JumpIfNotSmi(eax, &not_int32);
-        }
-        FloatingPointHelper::LoadSSE2Operands(masm, &not_floats);
-        FloatingPointHelper::CheckSSE2OperandIsInt32(
-            masm, &not_int32, xmm0, ebx, ecx, xmm2);
-        FloatingPointHelper::CheckSSE2OperandIsInt32(
-            masm, &not_int32, xmm1, edi, ecx, xmm2);
-        if (op_ == Token::MOD) {
-          if (encoded_right_arg_.has_value) {
-            __ cmp(edi, Immediate(fixed_right_arg_value()));
-            __ j(not_equal, &right_arg_changed);
-          }
-          GenerateRegisterArgsPush(masm);
-          __ InvokeBuiltin(Builtins::MOD, JUMP_FUNCTION);
-        } else {
-          switch (op_) {
-            case Token::ADD: __ addsd(xmm0, xmm1); break;
-            case Token::SUB: __ subsd(xmm0, xmm1); break;
-            case Token::MUL: __ mulsd(xmm0, xmm1); break;
-            case Token::DIV: __ divsd(xmm0, xmm1); break;
-            default: UNREACHABLE();
-          }
-          // Check result type if it is currently Int32.
-          if (result_type_ <= BinaryOpIC::INT32) {
-            FloatingPointHelper::CheckSSE2OperandIsInt32(
-                masm, &not_int32, xmm0, ecx, ecx, xmm2);
-          }
-          BinaryOpStub_GenerateHeapResultAllocation(masm, &call_runtime, mode_);
-          __ movdbl(FieldOperand(eax, HeapNumber::kValueOffset), xmm0);
-          __ ret(0);
-        }
-      } else {  // SSE2 not available, use FPU.
-        FloatingPointHelper::CheckFloatOperands(masm, &not_floats, ebx);
-        FloatingPointHelper::LoadFloatOperands(
-            masm,
-            ecx,
-            FloatingPointHelper::ARGS_IN_REGISTERS);
-        if (op_ == Token::MOD) {
-          // The operands are now on the FPU stack, but we don't need them.
-          __ fstp(0);
-          __ fstp(0);
-          GenerateRegisterArgsPush(masm);
-          __ InvokeBuiltin(Builtins::MOD, JUMP_FUNCTION);
-        } else {
-          switch (op_) {
-            case Token::ADD: __ faddp(1); break;
-            case Token::SUB: __ fsubp(1); break;
-            case Token::MUL: __ fmulp(1); break;
-            case Token::DIV: __ fdivp(1); break;
-            default: UNREACHABLE();
-          }
-          Label after_alloc_failure;
-          BinaryOpStub_GenerateHeapResultAllocation(
-              masm, &after_alloc_failure, mode_);
-          __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-          __ ret(0);
-          __ bind(&after_alloc_failure);
-          __ fstp(0);  // Pop FPU stack before calling runtime.
-          __ jmp(&call_runtime);
-        }
-      }
-
-      __ bind(&not_floats);
-      __ bind(&not_int32);
-      __ bind(&right_arg_changed);
-      GenerateTypeTransition(masm);
-      break;
-    }
-
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR: {
-      GenerateRegisterArgsPush(masm);
-      Label not_floats;
-      Label not_int32;
-      Label non_smi_result;
-      bool use_sse3 = platform_specific_bit_;
-      FloatingPointHelper::LoadUnknownsAsIntegers(
-          masm, use_sse3, left_type_, right_type_, &not_floats);
-      switch (op_) {
-        case Token::BIT_OR:  __ or_(eax, ecx); break;
-        case Token::BIT_AND: __ and_(eax, ecx); break;
-        case Token::BIT_XOR: __ xor_(eax, ecx); break;
-        case Token::SAR: __ sar_cl(eax); break;
-        case Token::SHL: __ shl_cl(eax); break;
-        case Token::SHR: __ shr_cl(eax); break;
-        default: UNREACHABLE();
-      }
-      if (op_ == Token::SHR) {
-        // Check if result is non-negative and fits in a smi.
-        __ test(eax, Immediate(0xc0000000));
-        __ j(not_zero, &call_runtime);
-      } else {
-        // Check if result fits in a smi.
-        __ cmp(eax, 0xc0000000);
-        __ j(negative, &non_smi_result, Label::kNear);
-      }
-      // Tag smi result and return.
-      __ SmiTag(eax);
-      __ ret(2 * kPointerSize);  // Drop two pushed arguments from the stack.
-
-      // All ops except SHR return a signed int32 that we load in
-      // a HeapNumber.
-      if (op_ != Token::SHR) {
-        __ bind(&non_smi_result);
-        // Allocate a heap number if needed.
-        __ mov(ebx, eax);  // ebx: result
-        Label skip_allocation;
-        switch (mode_) {
-          case OVERWRITE_LEFT:
-          case OVERWRITE_RIGHT:
-            // If the operand was an object, we skip the
-            // allocation of a heap number.
-            __ mov(eax, Operand(esp, mode_ == OVERWRITE_RIGHT ?
-                                1 * kPointerSize : 2 * kPointerSize));
-            __ JumpIfNotSmi(eax, &skip_allocation, Label::kNear);
-            // Fall through!
-          case NO_OVERWRITE:
-            __ AllocateHeapNumber(eax, ecx, edx, &call_runtime);
-            __ bind(&skip_allocation);
-            break;
-          default: UNREACHABLE();
-        }
-        // Store the result in the HeapNumber and return.
-        if (CpuFeatures::IsSupported(SSE2)) {
-          CpuFeatureScope use_sse2(masm, SSE2);
-          __ Cvtsi2sd(xmm0, ebx);
-          __ movdbl(FieldOperand(eax, HeapNumber::kValueOffset), xmm0);
-        } else {
-          __ mov(Operand(esp, 1 * kPointerSize), ebx);
-          __ fild_s(Operand(esp, 1 * kPointerSize));
-          __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-        }
-        __ ret(2 * kPointerSize);  // Drop two pushed arguments from the stack.
-      }
-
-      __ bind(&not_floats);
-      __ bind(&not_int32);
-      GenerateTypeTransitionWithSavedArgs(masm);
-      break;
-    }
-    default: UNREACHABLE(); break;
-  }
-
-  // If an allocation fails, or SHR hits a hard case, use the runtime system to
-  // get the correct result.
-  __ bind(&call_runtime);
-
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-      break;
-    case Token::MOD:
-      return;  // Handled above.
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      BinaryOpStub_GenerateRegisterArgsPop(masm);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  {
-    FrameScope scope(masm, StackFrame::INTERNAL);
-    __ push(edx);
-    __ push(eax);
-    GenerateCallRuntime(masm);
-  }
-  __ ret(0);
-}
-
-
-void BinaryOpStub::GenerateOddballStub(MacroAssembler* masm) {
-  if (op_ == Token::ADD) {
-    // Handle string addition here, because it is the only operation
-    // that does not do a ToNumber conversion on the operands.
-    GenerateAddStrings(masm);
-  }
-
-  Factory* factory = masm->isolate()->factory();
-
-  // Convert odd ball arguments to numbers.
-  Label check, done;
-  __ cmp(edx, factory->undefined_value());
-  __ j(not_equal, &check, Label::kNear);
-  if (Token::IsBitOp(op_)) {
-    __ xor_(edx, edx);
-  } else {
-    __ mov(edx, Immediate(factory->nan_value()));
-  }
-  __ jmp(&done, Label::kNear);
-  __ bind(&check);
-  __ cmp(eax, factory->undefined_value());
-  __ j(not_equal, &done, Label::kNear);
-  if (Token::IsBitOp(op_)) {
-    __ xor_(eax, eax);
-  } else {
-    __ mov(eax, Immediate(factory->nan_value()));
-  }
-  __ bind(&done);
-
-  GenerateNumberStub(masm);
-}
-
-
-void BinaryOpStub::GenerateNumberStub(MacroAssembler* masm) {
-  Label call_runtime;
-
-  // Floating point case.
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV: {
-      Label not_floats;
-      if (CpuFeatures::IsSupported(SSE2)) {
-        CpuFeatureScope use_sse2(masm, SSE2);
-
-        // It could be that only SMIs have been seen at either the left
-        // or the right operand. For precise type feedback, patch the IC
-        // again if this changes.
-        // In theory, we would need the same check in the non-SSE2 case,
-        // but since we don't support Crankshaft on such hardware we can
-        // afford not to care about precise type feedback.
-        if (left_type_ == BinaryOpIC::SMI) {
-          __ JumpIfNotSmi(edx, &not_floats);
-        }
-        if (right_type_ == BinaryOpIC::SMI) {
-          __ JumpIfNotSmi(eax, &not_floats);
-        }
-        FloatingPointHelper::LoadSSE2Operands(masm, &not_floats);
-        if (left_type_ == BinaryOpIC::INT32) {
-          FloatingPointHelper::CheckSSE2OperandIsInt32(
-              masm, &not_floats, xmm0, ecx, ecx, xmm2);
-        }
-        if (right_type_ == BinaryOpIC::INT32) {
-          FloatingPointHelper::CheckSSE2OperandIsInt32(
-              masm, &not_floats, xmm1, ecx, ecx, xmm2);
-        }
-
-        switch (op_) {
-          case Token::ADD: __ addsd(xmm0, xmm1); break;
-          case Token::SUB: __ subsd(xmm0, xmm1); break;
-          case Token::MUL: __ mulsd(xmm0, xmm1); break;
-          case Token::DIV: __ divsd(xmm0, xmm1); break;
-          default: UNREACHABLE();
-        }
-        BinaryOpStub_GenerateHeapResultAllocation(masm, &call_runtime, mode_);
-        __ movdbl(FieldOperand(eax, HeapNumber::kValueOffset), xmm0);
-        __ ret(0);
-      } else {  // SSE2 not available, use FPU.
-        FloatingPointHelper::CheckFloatOperands(masm, &not_floats, ebx);
-        FloatingPointHelper::LoadFloatOperands(
-            masm,
-            ecx,
-            FloatingPointHelper::ARGS_IN_REGISTERS);
-        switch (op_) {
-          case Token::ADD: __ faddp(1); break;
-          case Token::SUB: __ fsubp(1); break;
-          case Token::MUL: __ fmulp(1); break;
-          case Token::DIV: __ fdivp(1); break;
-          default: UNREACHABLE();
-        }
-        Label after_alloc_failure;
-        BinaryOpStub_GenerateHeapResultAllocation(
-            masm, &after_alloc_failure, mode_);
-        __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-        __ ret(0);
-        __ bind(&after_alloc_failure);
-        __ fstp(0);  // Pop FPU stack before calling runtime.
-        __ jmp(&call_runtime);
-      }
-
-      __ bind(&not_floats);
-      GenerateTypeTransition(masm);
-      break;
-    }
-
-    case Token::MOD: {
-      // For MOD we go directly to runtime in the non-smi case.
-      break;
-    }
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR: {
-      GenerateRegisterArgsPush(masm);
-      Label not_floats;
-      Label non_smi_result;
-      // We do not check the input arguments here, as any value is
-      // unconditionally truncated to an int32 anyway. To get the
-      // right optimized code, int32 type feedback is just right.
-      bool use_sse3 = platform_specific_bit_;
-      FloatingPointHelper::LoadUnknownsAsIntegers(
-                masm, use_sse3, left_type_, right_type_, &not_floats);
-      switch (op_) {
-        case Token::BIT_OR:  __ or_(eax, ecx); break;
-        case Token::BIT_AND: __ and_(eax, ecx); break;
-        case Token::BIT_XOR: __ xor_(eax, ecx); break;
-        case Token::SAR: __ sar_cl(eax); break;
-        case Token::SHL: __ shl_cl(eax); break;
-        case Token::SHR: __ shr_cl(eax); break;
-        default: UNREACHABLE();
-      }
-      if (op_ == Token::SHR) {
-        // Check if result is non-negative and fits in a smi.
-        __ test(eax, Immediate(0xc0000000));
-        __ j(not_zero, &call_runtime);
-      } else {
-        // Check if result fits in a smi.
-        __ cmp(eax, 0xc0000000);
-        __ j(negative, &non_smi_result, Label::kNear);
-      }
-      // Tag smi result and return.
-      __ SmiTag(eax);
-      __ ret(2 * kPointerSize);  // Drop two pushed arguments from the stack.
-
-      // All ops except SHR return a signed int32 that we load in
-      // a HeapNumber.
-      if (op_ != Token::SHR) {
-        __ bind(&non_smi_result);
-        // Allocate a heap number if needed.
-        __ mov(ebx, eax);  // ebx: result
-        Label skip_allocation;
-        switch (mode_) {
-          case OVERWRITE_LEFT:
-          case OVERWRITE_RIGHT:
-            // If the operand was an object, we skip the
-            // allocation of a heap number.
-            __ mov(eax, Operand(esp, mode_ == OVERWRITE_RIGHT ?
-                                1 * kPointerSize : 2 * kPointerSize));
-            __ JumpIfNotSmi(eax, &skip_allocation, Label::kNear);
-            // Fall through!
-          case NO_OVERWRITE:
-            __ AllocateHeapNumber(eax, ecx, edx, &call_runtime);
-            __ bind(&skip_allocation);
-            break;
-          default: UNREACHABLE();
-        }
-        // Store the result in the HeapNumber and return.
-        if (CpuFeatures::IsSupported(SSE2)) {
-          CpuFeatureScope use_sse2(masm, SSE2);
-          __ Cvtsi2sd(xmm0, ebx);
-          __ movdbl(FieldOperand(eax, HeapNumber::kValueOffset), xmm0);
-        } else {
-          __ mov(Operand(esp, 1 * kPointerSize), ebx);
-          __ fild_s(Operand(esp, 1 * kPointerSize));
-          __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-        }
-        __ ret(2 * kPointerSize);  // Drop two pushed arguments from the stack.
-      }
-
-      __ bind(&not_floats);
-      GenerateTypeTransitionWithSavedArgs(masm);
-      break;
-    }
-    default: UNREACHABLE(); break;
-  }
-
-  // If an allocation fails, or SHR or MOD hit a hard case,
-  // use the runtime system to get the correct result.
-  __ bind(&call_runtime);
-
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-    case Token::MOD:
-      break;
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      BinaryOpStub_GenerateRegisterArgsPop(masm);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  {
-    FrameScope scope(masm, StackFrame::INTERNAL);
-    __ push(edx);
-    __ push(eax);
-    GenerateCallRuntime(masm);
-  }
-  __ ret(0);
-}
-
-
-void BinaryOpStub::GenerateGeneric(MacroAssembler* masm) {
-  Label call_runtime;
-
-  Counters* counters = masm->isolate()->counters();
-  __ IncrementCounter(counters->generic_binary_stub_calls(), 1);
-
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-      break;
-    case Token::MOD:
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      GenerateRegisterArgsPush(masm);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  BinaryOpStub_GenerateSmiCode(
-      masm, &call_runtime, ALLOW_HEAPNUMBER_RESULTS, op_);
-
-  // Floating point case.
-  switch (op_) {
-    case Token::ADD:
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV: {
-      Label not_floats;
-      if (CpuFeatures::IsSupported(SSE2)) {
-        CpuFeatureScope use_sse2(masm, SSE2);
-        FloatingPointHelper::LoadSSE2Operands(masm, &not_floats);
-
-        switch (op_) {
-          case Token::ADD: __ addsd(xmm0, xmm1); break;
-          case Token::SUB: __ subsd(xmm0, xmm1); break;
-          case Token::MUL: __ mulsd(xmm0, xmm1); break;
-          case Token::DIV: __ divsd(xmm0, xmm1); break;
-          default: UNREACHABLE();
-        }
-        BinaryOpStub_GenerateHeapResultAllocation(masm, &call_runtime, mode_);
-        __ movdbl(FieldOperand(eax, HeapNumber::kValueOffset), xmm0);
-        __ ret(0);
-      } else {  // SSE2 not available, use FPU.
-        FloatingPointHelper::CheckFloatOperands(masm, &not_floats, ebx);
-        FloatingPointHelper::LoadFloatOperands(
-            masm,
-            ecx,
-            FloatingPointHelper::ARGS_IN_REGISTERS);
-        switch (op_) {
-          case Token::ADD: __ faddp(1); break;
-          case Token::SUB: __ fsubp(1); break;
-          case Token::MUL: __ fmulp(1); break;
-          case Token::DIV: __ fdivp(1); break;
-          default: UNREACHABLE();
-        }
-        Label after_alloc_failure;
-        BinaryOpStub_GenerateHeapResultAllocation(
-            masm, &after_alloc_failure, mode_);
-        __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-        __ ret(0);
-        __ bind(&after_alloc_failure);
-        __ fstp(0);  // Pop FPU stack before calling runtime.
-        __ jmp(&call_runtime);
-      }
-        __ bind(&not_floats);
-        break;
-      }
-    case Token::MOD: {
-      // For MOD we go directly to runtime in the non-smi case.
-      break;
-    }
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-      case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR: {
-      Label non_smi_result;
-      bool use_sse3 = platform_specific_bit_;
-      FloatingPointHelper::LoadUnknownsAsIntegers(masm,
-                                                  use_sse3,
-                                                  BinaryOpIC::GENERIC,
-                                                  BinaryOpIC::GENERIC,
-                                                  &call_runtime);
-      switch (op_) {
-        case Token::BIT_OR:  __ or_(eax, ecx); break;
-        case Token::BIT_AND: __ and_(eax, ecx); break;
-        case Token::BIT_XOR: __ xor_(eax, ecx); break;
-        case Token::SAR: __ sar_cl(eax); break;
-        case Token::SHL: __ shl_cl(eax); break;
-        case Token::SHR: __ shr_cl(eax); break;
-        default: UNREACHABLE();
-      }
-      if (op_ == Token::SHR) {
-        // Check if result is non-negative and fits in a smi.
-        __ test(eax, Immediate(0xc0000000));
-        __ j(not_zero, &call_runtime);
-      } else {
-        // Check if result fits in a smi.
-        __ cmp(eax, 0xc0000000);
-        __ j(negative, &non_smi_result, Label::kNear);
-      }
-      // Tag smi result and return.
-      __ SmiTag(eax);
-      __ ret(2 * kPointerSize);  // Drop the arguments from the stack.
-
-      // All ops except SHR return a signed int32 that we load in
-      // a HeapNumber.
-      if (op_ != Token::SHR) {
-        __ bind(&non_smi_result);
-        // Allocate a heap number if needed.
-        __ mov(ebx, eax);  // ebx: result
-        Label skip_allocation;
-        switch (mode_) {
-          case OVERWRITE_LEFT:
-          case OVERWRITE_RIGHT:
-            // If the operand was an object, we skip the
-              // allocation of a heap number.
-            __ mov(eax, Operand(esp, mode_ == OVERWRITE_RIGHT ?
-                                1 * kPointerSize : 2 * kPointerSize));
-            __ JumpIfNotSmi(eax, &skip_allocation, Label::kNear);
-            // Fall through!
-          case NO_OVERWRITE:
-            __ AllocateHeapNumber(eax, ecx, edx, &call_runtime);
-            __ bind(&skip_allocation);
-            break;
-          default: UNREACHABLE();
-        }
-        // Store the result in the HeapNumber and return.
-        if (CpuFeatures::IsSupported(SSE2)) {
-          CpuFeatureScope use_sse2(masm, SSE2);
-          __ Cvtsi2sd(xmm0, ebx);
-          __ movdbl(FieldOperand(eax, HeapNumber::kValueOffset), xmm0);
-        } else {
-          __ mov(Operand(esp, 1 * kPointerSize), ebx);
-          __ fild_s(Operand(esp, 1 * kPointerSize));
-          __ fstp_d(FieldOperand(eax, HeapNumber::kValueOffset));
-        }
-        __ ret(2 * kPointerSize);
-      }
-      break;
-    }
-    default: UNREACHABLE(); break;
-  }
-
-  // If all else fails, use the runtime system to get the correct
-  // result.
-  __ bind(&call_runtime);
-  switch (op_) {
-    case Token::ADD:
-      GenerateAddStrings(masm);
-      // Fall through.
-    case Token::SUB:
-    case Token::MUL:
-    case Token::DIV:
-      break;
-    case Token::MOD:
-    case Token::BIT_OR:
-    case Token::BIT_AND:
-    case Token::BIT_XOR:
-    case Token::SAR:
-    case Token::SHL:
-    case Token::SHR:
-      BinaryOpStub_GenerateRegisterArgsPop(masm);
-      break;
-    default:
-      UNREACHABLE();
-  }
-
-  {
-    FrameScope scope(masm, StackFrame::INTERNAL);
-    __ push(edx);
-    __ push(eax);
-    GenerateCallRuntime(masm);
-  }
-  __ ret(0);
-}
-
-
-void BinaryOpStub::GenerateAddStrings(MacroAssembler* masm) {
-  ASSERT(op_ == Token::ADD);
-  Label left_not_string, call_runtime;
-
-  // Registers containing left and right operands respectively.
-  Register left = edx;
-  Register right = eax;
-
-  // Test if left operand is a string.
-  __ JumpIfSmi(left, &left_not_string, Label::kNear);
-  __ CmpObjectType(left, FIRST_NONSTRING_TYPE, ecx);
-  __ j(above_equal, &left_not_string, Label::kNear);
-
-  StringAddStub string_add_left_stub(
-      (StringAddFlags)(STRING_ADD_CHECK_RIGHT | STRING_ADD_ERECT_FRAME));
-  GenerateRegisterArgsPush(masm);
-  __ TailCallStub(&string_add_left_stub);
-
-  // Left operand is not a string, test right.
-  __ bind(&left_not_string);
-  __ JumpIfSmi(right, &call_runtime, Label::kNear);
-  __ CmpObjectType(right, FIRST_NONSTRING_TYPE, ecx);
-  __ j(above_equal, &call_runtime, Label::kNear);
-
-  StringAddStub string_add_right_stub(
-      (StringAddFlags)(STRING_ADD_CHECK_LEFT | STRING_ADD_ERECT_FRAME));
-  GenerateRegisterArgsPush(masm);
-  __ TailCallStub(&string_add_right_stub);
-
-  // Neither argument is a string.
-  __ bind(&call_runtime);
-}
-
-
-static void BinaryOpStub_GenerateHeapResultAllocation(MacroAssembler* masm,
-                                                      Label* alloc_failure,
-                                                      OverwriteMode mode) {
-  Label skip_allocation;
-  switch (mode) {
-    case OVERWRITE_LEFT: {
-      // If the argument in edx is already an object, we skip the
-      // allocation of a heap number.
-      __ JumpIfNotSmi(edx, &skip_allocation, Label::kNear);
-      // Allocate a heap number for the result. Keep eax and edx intact
-      // for the possible runtime call.
-      __ AllocateHeapNumber(ebx, ecx, no_reg, alloc_failure);
-      // Now edx can be overwritten losing one of the arguments as we are
-      // now done and will not need it any more.
-      __ mov(edx, ebx);
-      __ bind(&skip_allocation);
-      // Use object in edx as a result holder
-      __ mov(eax, edx);
-      break;
-    }
-    case OVERWRITE_RIGHT:
-      // If the argument in eax is already an object, we skip the
-      // allocation of a heap number.
-      __ JumpIfNotSmi(eax, &skip_allocation, Label::kNear);
-      // Fall through!
-    case NO_OVERWRITE:
-      // Allocate a heap number for the result. Keep eax and edx intact
-      // for the possible runtime call.
-      __ AllocateHeapNumber(ebx, ecx, no_reg, alloc_failure);
-      // Now eax can be overwritten losing one of the arguments as we are
-      // now done and will not need it any more.
-      __ mov(eax, ebx);
-      __ bind(&skip_allocation);
-      break;
-    default: UNREACHABLE();
-  }
-}
-
-
-void BinaryOpStub::GenerateRegisterArgsPush(MacroAssembler* masm) {
-  __ pop(ecx);
-  __ push(edx);
-  __ push(eax);
-  __ push(ecx);
-}
-
-
 void TranscendentalCacheStub::Generate(MacroAssembler* masm) {
   // TAGGED case:
   //   Input:
@@ -2231,79 +957,6 @@ void TranscendentalCacheStub::GenerateOperation(
 }
 
 
-// Input: edx, eax are the left and right objects of a bit op.
-// Output: eax, ecx are left and right integers for a bit op.
-// Warning: can clobber inputs even when it jumps to |conversion_failure|!
-void FloatingPointHelper::LoadUnknownsAsIntegers(
-    MacroAssembler* masm,
-    bool use_sse3,
-    BinaryOpIC::TypeInfo left_type,
-    BinaryOpIC::TypeInfo right_type,
-    Label* conversion_failure) {
-  // Check float operands.
-  Label arg1_is_object, check_undefined_arg1;
-  Label arg2_is_object, check_undefined_arg2;
-  Label load_arg2, done;
-
-  // Test if arg1 is a Smi.
-  if (left_type == BinaryOpIC::SMI) {
-    __ JumpIfNotSmi(edx, conversion_failure);
-  } else {
-    __ JumpIfNotSmi(edx, &arg1_is_object, Label::kNear);
-  }
-
-  __ SmiUntag(edx);
-  __ jmp(&load_arg2);
-
-  // If the argument is undefined it converts to zero (ECMA-262, section 9.5).
-  __ bind(&check_undefined_arg1);
-  Factory* factory = masm->isolate()->factory();
-  __ cmp(edx, factory->undefined_value());
-  __ j(not_equal, conversion_failure);
-  __ mov(edx, Immediate(0));
-  __ jmp(&load_arg2);
-
-  __ bind(&arg1_is_object);
-  __ mov(ebx, FieldOperand(edx, HeapObject::kMapOffset));
-  __ cmp(ebx, factory->heap_number_map());
-  __ j(not_equal, &check_undefined_arg1);
-
-  __ TruncateHeapNumberToI(edx, edx);
-
-  // Here edx has the untagged integer, eax has a Smi or a heap number.
-  __ bind(&load_arg2);
-
-  // Test if arg2 is a Smi.
-  if (right_type == BinaryOpIC::SMI) {
-    __ JumpIfNotSmi(eax, conversion_failure);
-  } else {
-    __ JumpIfNotSmi(eax, &arg2_is_object, Label::kNear);
-  }
-
-  __ SmiUntag(eax);
-  __ mov(ecx, eax);
-  __ jmp(&done);
-
-  // If the argument is undefined it converts to zero (ECMA-262, section 9.5).
-  __ bind(&check_undefined_arg2);
-  __ cmp(eax, factory->undefined_value());
-  __ j(not_equal, conversion_failure);
-  __ mov(ecx, Immediate(0));
-  __ jmp(&done);
-
-  __ bind(&arg2_is_object);
-  __ mov(ebx, FieldOperand(eax, HeapObject::kMapOffset));
-  __ cmp(ebx, factory->heap_number_map());
-  __ j(not_equal, &check_undefined_arg2);
-  // Get the untagged integer version of the eax heap number in ecx.
-
-  __ TruncateHeapNumberToI(ecx, eax);
-
-  __ bind(&done);
-  __ mov(eax, edx);
-}
-
-
 void FloatingPointHelper::LoadFloatOperand(MacroAssembler* masm,
                                            Register number) {
   Label load_smi, done;
@@ -2353,95 +1006,6 @@ void FloatingPointHelper::LoadSSE2Operands(MacroAssembler* masm,
 }
 
 
-void FloatingPointHelper::LoadSSE2Smis(MacroAssembler* masm,
-                                       Register scratch) {
-  const Register left = edx;
-  const Register right = eax;
-  __ mov(scratch, left);
-  ASSERT(!scratch.is(right));  // We're about to clobber scratch.
-  __ SmiUntag(scratch);
-  __ Cvtsi2sd(xmm0, scratch);
-
-  __ mov(scratch, right);
-  __ SmiUntag(scratch);
-  __ Cvtsi2sd(xmm1, scratch);
-}
-
-
-void FloatingPointHelper::CheckSSE2OperandIsInt32(MacroAssembler* masm,
-                                                  Label* non_int32,
-                                                  XMMRegister operand,
-                                                  Register int32_result,
-                                                  Register scratch,
-                                                  XMMRegister xmm_scratch) {
-  __ cvttsd2si(int32_result, Operand(operand));
-  __ Cvtsi2sd(xmm_scratch, int32_result);
-  __ pcmpeqd(xmm_scratch, operand);
-  __ movmskps(scratch, xmm_scratch);
-  // Two least significant bits should be both set.
-  __ not_(scratch);
-  __ test(scratch, Immediate(3));
-  __ j(not_zero, non_int32);
-}
-
-
-void FloatingPointHelper::LoadFloatOperands(MacroAssembler* masm,
-                                            Register scratch,
-                                            ArgLocation arg_location) {
-  Label load_smi_1, load_smi_2, done_load_1, done;
-  if (arg_location == ARGS_IN_REGISTERS) {
-    __ mov(scratch, edx);
-  } else {
-    __ mov(scratch, Operand(esp, 2 * kPointerSize));
-  }
-  __ JumpIfSmi(scratch, &load_smi_1, Label::kNear);
-  __ fld_d(FieldOperand(scratch, HeapNumber::kValueOffset));
-  __ bind(&done_load_1);
-
-  if (arg_location == ARGS_IN_REGISTERS) {
-    __ mov(scratch, eax);
-  } else {
-    __ mov(scratch, Operand(esp, 1 * kPointerSize));
-  }
-  __ JumpIfSmi(scratch, &load_smi_2, Label::kNear);
-  __ fld_d(FieldOperand(scratch, HeapNumber::kValueOffset));
-  __ jmp(&done, Label::kNear);
-
-  __ bind(&load_smi_1);
-  __ SmiUntag(scratch);
-  __ push(scratch);
-  __ fild_s(Operand(esp, 0));
-  __ pop(scratch);
-  __ jmp(&done_load_1);
-
-  __ bind(&load_smi_2);
-  __ SmiUntag(scratch);
-  __ push(scratch);
-  __ fild_s(Operand(esp, 0));
-  __ pop(scratch);
-
-  __ bind(&done);
-}
-
-
-void FloatingPointHelper::LoadFloatSmis(MacroAssembler* masm,
-                                        Register scratch) {
-  const Register left = edx;
-  const Register right = eax;
-  __ mov(scratch, left);
-  ASSERT(!scratch.is(right));  // We're about to clobber scratch.
-  __ SmiUntag(scratch);
-  __ push(scratch);
-  __ fild_s(Operand(esp, 0));
-
-  __ mov(scratch, right);
-  __ SmiUntag(scratch);
-  __ mov(Operand(esp, 0), scratch);
-  __ fild_s(Operand(esp, 0));
-  __ pop(scratch);
-}
-
-
 void FloatingPointHelper::CheckFloatOperands(MacroAssembler* masm,
                                              Label* non_float,
                                              Register scratch) {
@@ -4354,6 +2918,8 @@ void CodeStub::GenerateStubsAheadOfTime(Isolate* isolate) {
   RecordWriteStub::GenerateFixedRegStubsAheadOfTime(isolate);
   ArrayConstructorStubBase::GenerateStubsAheadOfTime(isolate);
   CreateAllocationSiteStub::GenerateAheadOfTime(isolate);
+  PlatformFeatureScope sse2(SSE2);
+  BinaryOpStub::GenerateAheadOfTime(isolate);
 }