[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/src/test_mutex.c

Index: third_party/sqlite/sqlite-src-3080704/src/test_mutex.c
diff --git a/third_party/sqlite/sqlite-src-3080704/src/test_mutex.c b/third_party/sqlite/sqlite-src-3080704/src/test_mutex.c
deleted file mode 100644
index c9b4a29ab75c77ea5f36b5193256d70fe6580e95..0000000000000000000000000000000000000000
--- a/third_party/sqlite/sqlite-src-3080704/src/test_mutex.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/*
-** 2008 June 18
-**
-** The author disclaims copyright to this source code.  In place of
-** a legal notice, here is a blessing:
-**
-**    May you do good and not evil.
-**    May you find forgiveness for yourself and forgive others.
-**    May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains test logic for the sqlite3_mutex interfaces.
-*/
-
-#include "tcl.h"
-#include "sqlite3.h"
-#include "sqliteInt.h"
-#include <stdlib.h>
-#include <assert.h>
-#include <string.h>
-
-/* defined in main.c */
-extern const char *sqlite3ErrName(int);
-
-/* A countable mutex */
-struct sqlite3_mutex {
-  sqlite3_mutex *pReal;
-  int eType;
-};
-
-/* State variables */
-static struct test_mutex_globals {
-  int isInstalled;              /* True if installed */
-  int disableInit;              /* True to cause sqlite3_initalize() to fail */
-  int disableTry;               /* True to force sqlite3_mutex_try() to fail */
-  int isInit;                   /* True if initialized */
-  sqlite3_mutex_methods m;      /* Interface to "real" mutex system */
-  int aCounter[8];              /* Number of grabs of each type of mutex */
-  sqlite3_mutex aStatic[6];     /* The six static mutexes */
-} g = {0};
-
-/* Return true if the countable mutex is currently held */
-static int counterMutexHeld(sqlite3_mutex *p){
-  return g.m.xMutexHeld(p->pReal);
-}
-
-/* Return true if the countable mutex is not currently held */
-static int counterMutexNotheld(sqlite3_mutex *p){
-  return g.m.xMutexNotheld(p->pReal);
-}
-
-/* Initialize the countable mutex interface
-** Or, if g.disableInit is non-zero, then do not initialize but instead
-** return the value of g.disableInit as the result code.  This can be used
-** to simulate an initialization failure.
-*/
-static int counterMutexInit(void){ 
-  int rc;
-  if( g.disableInit ) return g.disableInit;
-  rc = g.m.xMutexInit();
-  g.isInit = 1;
-  return rc;
-}
-
-/*
-** Uninitialize the mutex subsystem
-*/
-static int counterMutexEnd(void){ 
-  g.isInit = 0;
-  return g.m.xMutexEnd();
-}
-
-/*
-** Allocate a countable mutex
-*/
-static sqlite3_mutex *counterMutexAlloc(int eType){
-  sqlite3_mutex *pReal;
-  sqlite3_mutex *pRet = 0;
-
-  assert( g.isInit );
-  assert(eType<8 && eType>=0);
-
-  pReal = g.m.xMutexAlloc(eType);
-  if( !pReal ) return 0;
-
-  if( eType==SQLITE_MUTEX_FAST || eType==SQLITE_MUTEX_RECURSIVE ){
-    pRet = (sqlite3_mutex *)malloc(sizeof(sqlite3_mutex));
-  }else{
-    pRet = &g.aStatic[eType-2];
-  }
-
-  pRet->eType = eType;
-  pRet->pReal = pReal;
-  return pRet;
-}
-
-/*
-** Free a countable mutex
-*/
-static void counterMutexFree(sqlite3_mutex *p){
-  assert( g.isInit );
-  g.m.xMutexFree(p->pReal);
-  if( p->eType==SQLITE_MUTEX_FAST || p->eType==SQLITE_MUTEX_RECURSIVE ){
-    free(p);
-  }
-}
-
-/*
-** Enter a countable mutex.  Block until entry is safe.
-*/
-static void counterMutexEnter(sqlite3_mutex *p){
-  assert( g.isInit );
-  g.aCounter[p->eType]++;
-  g.m.xMutexEnter(p->pReal);
-}
-
-/*
-** Try to enter a mutex.  Return true on success.
-*/
-static int counterMutexTry(sqlite3_mutex *p){
-  assert( g.isInit );
-  g.aCounter[p->eType]++;
-  if( g.disableTry ) return SQLITE_BUSY;
-  return g.m.xMutexTry(p->pReal);
-}
-
-/* Leave a mutex
-*/
-static void counterMutexLeave(sqlite3_mutex *p){
-  assert( g.isInit );
-  g.m.xMutexLeave(p->pReal);
-}
-
-/*
-** sqlite3_shutdown
-*/
-static int test_shutdown(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  int rc;
-
-  if( objc!=1 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "");
-    return TCL_ERROR;
-  }
-
-  rc = sqlite3_shutdown();
-  Tcl_SetResult(interp, (char *)sqlite3ErrName(rc), TCL_VOLATILE);
-  return TCL_OK;
-}
-
-/*
-** sqlite3_initialize
-*/
-static int test_initialize(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  int rc;
-
-  if( objc!=1 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "");
-    return TCL_ERROR;
-  }
-
-  rc = sqlite3_initialize();
-  Tcl_SetResult(interp, (char *)sqlite3ErrName(rc), TCL_VOLATILE);
-  return TCL_OK;
-}
-
-/*
-** install_mutex_counters BOOLEAN
-*/
-static int test_install_mutex_counters(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  int rc = SQLITE_OK;
-  int isInstall;
-
-  sqlite3_mutex_methods counter_methods = {
-    counterMutexInit,
-    counterMutexEnd,
-    counterMutexAlloc,
-    counterMutexFree,
-    counterMutexEnter,
-    counterMutexTry,
-    counterMutexLeave,
-    counterMutexHeld,
-    counterMutexNotheld
-  };
-
-  if( objc!=2 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "BOOLEAN");
-    return TCL_ERROR;
-  }
-  if( TCL_OK!=Tcl_GetBooleanFromObj(interp, objv[1], &isInstall) ){
-    return TCL_ERROR;
-  }
-
-  assert(isInstall==0 || isInstall==1);
-  assert(g.isInstalled==0 || g.isInstalled==1);
-  if( isInstall==g.isInstalled ){
-    Tcl_AppendResult(interp, "mutex counters are ", 0);
-    Tcl_AppendResult(interp, isInstall?"already installed":"not installed", 0);
-    return TCL_ERROR;
-  }
-
-  if( isInstall ){
-    assert( g.m.xMutexAlloc==0 );
-    rc = sqlite3_config(SQLITE_CONFIG_GETMUTEX, &g.m);
-    if( rc==SQLITE_OK ){
-      sqlite3_config(SQLITE_CONFIG_MUTEX, &counter_methods);
-    }
-    g.disableTry = 0;
-  }else{
-    assert( g.m.xMutexAlloc );
-    rc = sqlite3_config(SQLITE_CONFIG_MUTEX, &g.m);
-    memset(&g.m, 0, sizeof(sqlite3_mutex_methods));
-  }
-
-  if( rc==SQLITE_OK ){
-    g.isInstalled = isInstall;
-  }
-
-  Tcl_SetResult(interp, (char *)sqlite3ErrName(rc), TCL_VOLATILE);
-  return TCL_OK;
-}
-
-/*
-** read_mutex_counters
-*/
-static int test_read_mutex_counters(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  Tcl_Obj *pRet;
-  int ii;
-  char *aName[8] = {
-    "fast",        "recursive",   "static_master", "static_mem", 
-    "static_open", "static_prng", "static_lru",    "static_pmem"
-  };
-
-  if( objc!=1 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "");
-    return TCL_ERROR;
-  }
-
-  pRet = Tcl_NewObj();
-  Tcl_IncrRefCount(pRet);
-  for(ii=0; ii<8; ii++){
-    Tcl_ListObjAppendElement(interp, pRet, Tcl_NewStringObj(aName[ii], -1));
-    Tcl_ListObjAppendElement(interp, pRet, Tcl_NewIntObj(g.aCounter[ii]));
-  }
-  Tcl_SetObjResult(interp, pRet);
-  Tcl_DecrRefCount(pRet);
-
-  return TCL_OK;
-}
-
-/*
-** clear_mutex_counters
-*/
-static int test_clear_mutex_counters(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  int ii;
-
-  if( objc!=1 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "");
-    return TCL_ERROR;
-  }
-
-  for(ii=0; ii<8; ii++){
-    g.aCounter[ii] = 0;
-  }
-  return TCL_OK;
-}
-
-/*
-** Create and free a mutex.  Return the mutex pointer.  The pointer
-** will be invalid since the mutex has already been freed.  The
-** return pointer just checks to see if the mutex really was allocated.
-*/
-static int test_alloc_mutex(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-#if SQLITE_THREADSAFE
-  sqlite3_mutex *p = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST);
-  char zBuf[100];
-  sqlite3_mutex_free(p);
-  sqlite3_snprintf(sizeof(zBuf), zBuf, "%p", p);
-  Tcl_AppendResult(interp, zBuf, (char*)0);
-#endif
-  return TCL_OK;
-}
-
-/*
-** sqlite3_config OPTION
-**
-** OPTION can be either one of the keywords:
-**
-**            SQLITE_CONFIG_SINGLETHREAD
-**            SQLITE_CONFIG_MULTITHREAD
-**            SQLITE_CONFIG_SERIALIZED
-**
-** Or OPTION can be an raw integer.
-*/
-static int test_config(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  struct ConfigOption {
-    const char *zName;
-    int iValue;
-  } aOpt[] = {
-    {"singlethread", SQLITE_CONFIG_SINGLETHREAD},
-    {"multithread",  SQLITE_CONFIG_MULTITHREAD},
-    {"serialized",   SQLITE_CONFIG_SERIALIZED},
-    {0, 0}
-  };
-  int s = sizeof(struct ConfigOption);
-  int i;
-  int rc;
-
-  if( objc!=2 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "");
-    return TCL_ERROR;
-  }
-
-  if( Tcl_GetIndexFromObjStruct(interp, objv[1], aOpt, s, "flag", 0, &i) ){
-    if( Tcl_GetIntFromObj(interp, objv[1], &i) ){
-      return TCL_ERROR;
-    }
-  }else{
-    i = aOpt[i].iValue;
-  }
-
-  rc = sqlite3_config(i);
-  Tcl_SetResult(interp, (char *)sqlite3ErrName(rc), TCL_VOLATILE);
-  return TCL_OK;
-}
-
-static sqlite3 *getDbPointer(Tcl_Interp *pInterp, Tcl_Obj *pObj){
-  sqlite3 *db;
-  Tcl_CmdInfo info;
-  char *zCmd = Tcl_GetString(pObj);
-  if( Tcl_GetCommandInfo(pInterp, zCmd, &info) ){
-    db = *((sqlite3 **)info.objClientData);
-  }else{
-    db = (sqlite3*)sqlite3TestTextToPtr(zCmd);
-  }
-  assert( db );
-  return db;
-}
-
-static int test_enter_db_mutex(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  sqlite3 *db;
-  if( objc!=2 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "DB");
-    return TCL_ERROR;
-  }
-  db = getDbPointer(interp, objv[1]);
-  if( !db ){
-    return TCL_ERROR;
-  }
-  sqlite3_mutex_enter(sqlite3_db_mutex(db));
-  return TCL_OK;
-}
-
-static int test_leave_db_mutex(
-  void * clientData,
-  Tcl_Interp *interp,
-  int objc,
-  Tcl_Obj *CONST objv[]
-){
-  sqlite3 *db;
-  if( objc!=2 ){
-    Tcl_WrongNumArgs(interp, 1, objv, "DB");
-    return TCL_ERROR;
-  }
-  db = getDbPointer(interp, objv[1]);
-  if( !db ){
-    return TCL_ERROR;
-  }
-  sqlite3_mutex_leave(sqlite3_db_mutex(db));
-  return TCL_OK;
-}
-
-int Sqlitetest_mutex_Init(Tcl_Interp *interp){
-  static struct {
-    char *zName;
-    Tcl_ObjCmdProc *xProc;
-  } aCmd[] = {
-    { "sqlite3_shutdown",        (Tcl_ObjCmdProc*)test_shutdown },
-    { "sqlite3_initialize",      (Tcl_ObjCmdProc*)test_initialize },
-    { "sqlite3_config",          (Tcl_ObjCmdProc*)test_config },
-
-    { "enter_db_mutex",          (Tcl_ObjCmdProc*)test_enter_db_mutex },
-    { "leave_db_mutex",          (Tcl_ObjCmdProc*)test_leave_db_mutex },
-
-    { "alloc_dealloc_mutex",     (Tcl_ObjCmdProc*)test_alloc_mutex },
-    { "install_mutex_counters",  (Tcl_ObjCmdProc*)test_install_mutex_counters },
-    { "read_mutex_counters",     (Tcl_ObjCmdProc*)test_read_mutex_counters },
-    { "clear_mutex_counters",    (Tcl_ObjCmdProc*)test_clear_mutex_counters },
-  };
-  int i;
-  for(i=0; i<sizeof(aCmd)/sizeof(aCmd[0]); i++){
-    Tcl_CreateObjCommand(interp, aCmd[i].zName, aCmd[i].xProc, 0, 0);
-  }
-
-  Tcl_LinkVar(interp, "disable_mutex_init", 
-              (char*)&g.disableInit, TCL_LINK_INT);
-  Tcl_LinkVar(interp, "disable_mutex_try", 
-              (char*)&g.disableTry, TCL_LINK_INT);
-  return SQLITE_OK;
-}