[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/test/fts3_common.tcl

Index: third_party/sqlite/sqlite-src-3080704/test/fts3_common.tcl
diff --git a/third_party/sqlite/sqlite-src-3080704/test/fts3_common.tcl b/third_party/sqlite/sqlite-src-3080704/test/fts3_common.tcl
deleted file mode 100644
index 2ed1f70bf626bee9781bdba5393c3a004227c841..0000000000000000000000000000000000000000
--- a/third_party/sqlite/sqlite-src-3080704/test/fts3_common.tcl
+++ /dev/null
@@ -1,416 +0,0 @@
-# 2009 November 04
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# This file contains common code used the fts3 tests. At one point
-# equivalent functionality was implemented in C code. But it is easier
-# to use Tcl.
-#
-
-#-------------------------------------------------------------------------
-# INSTRUCTIONS
-#
-# The following commands are available:
-#
-#   fts3_build_db_1 N
-#     Using database handle [db] create an FTS4 table named t1 and populate
-#     it with N rows of data. N must be less than 10,000. Refer to the
-#     header comments above the proc implementation below for details.
-#
-#   fts3_build_db_2 N
-#     Using database handle [db] create an FTS4 table named t2 and populate
-#     it with N rows of data. N must be less than 100,000. Refer to the
-#     header comments above the proc implementation below for details.
-#
-#   fts3_integrity_check TBL
-#     TBL must be an FTS table in the database currently opened by handle
-#     [db]. This proc loads and tokenizes all documents within the table,
-#     then checks that the current contents of the FTS index matches the
-#     results.
-#
-#   fts3_terms TBL WHERE
-#     Todo.
-#
-#   fts3_doclist TBL TERM WHERE
-#     Todo.
-#
-#
-#
-
-#-------------------------------------------------------------------------
-# USAGE: fts3_build_db_1 SWITCHES N
-#
-# Build a sample FTS table in the database opened by database connection 
-# [db]. The name of the new table is "t1".
-#
-proc fts3_build_db_1 {args} {
-
-  set default(-module) fts4
-
-  set nArg [llength $args]
-  if {($nArg%2)==0} {
-    error "wrong # args: should be \"fts3_build_db_1 ?switches? n\""
-  }
-
-  set n [lindex $args [expr $nArg-1]]
-  array set opts [array get default]
-  array set opts [lrange $args 0 [expr $nArg-2]]
-  foreach k [array names opts] {
-    if {0==[info exists default($k)]} { error "unknown option: $k" }
-  }
-
-  if {$n > 10000} {error "n must be <= 10000"}
-  db eval "CREATE VIRTUAL TABLE t1 USING $opts(-module) (x, y)"
-
-  set xwords [list zero one two three four five six seven eight nine ten]
-  set ywords [list alpha beta gamma delta epsilon zeta eta theta iota kappa]
-
-  for {set i 0} {$i < $n} {incr i} {
-    set x ""
-    set y ""
-
-    set x [list]
-    lappend x [lindex $xwords [expr ($i / 1000) % 10]]
-    lappend x [lindex $xwords [expr ($i / 100)  % 10]]
-    lappend x [lindex $xwords [expr ($i / 10)   % 10]]
-    lappend x [lindex $xwords [expr ($i / 1)   % 10]]
-
-    set y [list]
-    lappend y [lindex $ywords [expr ($i / 1000) % 10]]
-    lappend y [lindex $ywords [expr ($i / 100)  % 10]]
-    lappend y [lindex $ywords [expr ($i / 10)   % 10]]
-    lappend y [lindex $ywords [expr ($i / 1)   % 10]]
-
-    db eval { INSERT INTO t1(docid, x, y) VALUES($i, $x, $y) }
-  }
-}
-
-#-------------------------------------------------------------------------
-# USAGE: fts3_build_db_2 N ARGS
-#
-# Build a sample FTS table in the database opened by database connection 
-# [db]. The name of the new table is "t2".
-#
-proc fts3_build_db_2 {args} {
-
-  set default(-module) fts4
-  set default(-extra)   ""
-
-  set nArg [llength $args]
-  if {($nArg%2)==0} {
-    error "wrong # args: should be \"fts3_build_db_1 ?switches? n\""
-  }
-
-  set n [lindex $args [expr $nArg-1]]
-  array set opts [array get default]
-  array set opts [lrange $args 0 [expr $nArg-2]]
-  foreach k [array names opts] {
-    if {0==[info exists default($k)]} { error "unknown option: $k" }
-  }
-
-  if {$n > 100000} {error "n must be <= 100000"}
-
-  set sql "CREATE VIRTUAL TABLE t2 USING $opts(-module) (content"
-  if {$opts(-extra) != ""} {
-    append sql ", " $opts(-extra)
-  }
-  append sql ")"
-  db eval $sql
-
-  set chars [list a b c d e f g h  i j k l m n o p  q r s t u v w x  y z ""]
-
-  for {set i 0} {$i < $n} {incr i} {
-    set word ""
-    set nChar [llength $chars]
-    append word [lindex $chars [expr {($i / 1)   % $nChar}]]
-    append word [lindex $chars [expr {($i / $nChar)  % $nChar}]]
-    append word [lindex $chars [expr {($i / ($nChar*$nChar)) % $nChar}]]
-
-    db eval { INSERT INTO t2(docid, content) VALUES($i, $word) }
-  }
-}
-
-#-------------------------------------------------------------------------
-# USAGE: fts3_integrity_check TBL
-#
-# This proc is used to verify that the full-text index is consistent with
-# the contents of the fts3 table. In other words, it checks that the
-# data in the %_contents table matches that in the %_segdir and %_segments 
-# tables.
-#
-# This is not an efficient procedure. It uses a lot of memory and a lot
-# of CPU. But it is better than not checking at all.
-#
-# The procedure is:
-#
-#   1) Read the entire full-text index from the %_segdir and %_segments
-#      tables into memory. For each entry in the index, the following is
-#      done:
-#
-#          set C($iDocid,$iCol,$iPosition) $zTerm
-#
-#   2) Iterate through each column of each row of the %_content table. 
-#      Tokenize all documents, and check that for each token there is
-#      a corresponding entry in the $C array. After checking a token,
-#      [unset] the $C array entry.
-#
-#   3) Check that array $C is now empty.
-#      
-#
-proc fts3_integrity_check {tbl} {
-
-  fts3_read2 $tbl 1 A
-
-  foreach zTerm [array names A] {
-    #puts $zTerm
-    foreach doclist $A($zTerm) {
-      set docid 0
-      while {[string length $doclist]>0} {
-        set iCol 0
-        set iPos 0
-        set lPos [list]
-        set lCol [list]
-
-        # First varint of a doclist-entry is the docid. Delta-compressed
-        # with respect to the docid of the previous entry.
-        #
-        incr docid [gobble_varint doclist]
-        if {[info exists D($zTerm,$docid)]} {
-          while {[set iDelta [gobble_varint doclist]] != 0} {}
-          continue
-        }
-        set D($zTerm,$docid) 1
-
-        # Gobble varints until the 0x00 that terminates the doclist-entry
-        # is found.
-        while {[set iDelta [gobble_varint doclist]] > 0} {
-          if {$iDelta == 1} {
-            set iCol [gobble_varint doclist]
-            set iPos 0
-          } else {
-            incr iPos $iDelta
-            incr iPos -2
-            set C($docid,$iCol,$iPos) $zTerm
-          }
-        }
-      }
-    }
-  }
-
-  foreach key [array names C] {
-    #puts "$key -> $C($key)"
-  }
-
-
-  db eval "SELECT * FROM ${tbl}_content" E {
-    set iCol 0
-    set iDoc $E(docid)
-    foreach col [lrange $E(*) 1 end] {
-      set c $E($col)
-      set sql {SELECT fts3_tokenizer_test('simple', $c)}
-
-      foreach {pos term dummy} [db one $sql] {
-        if {![info exists C($iDoc,$iCol,$pos)]} {
-          set es "Error at docid=$iDoc col=$iCol pos=$pos. Index is missing"
-          lappend errors $es
-        } else {
-          if {[string compare $C($iDoc,$iCol,$pos) $term]} {
-            set    es "Error at docid=$iDoc col=$iCol pos=$pos. Index "
-            append es "has \"$C($iDoc,$iCol,$pos)\", document has \"$term\""
-            lappend errors $es
-          }
-          unset C($iDoc,$iCol,$pos)
-        }
-      }
-      incr iCol
-    }
-  }
-
-  foreach c [array names C] {
-    lappend errors "Bad index entry: $c -> $C($c)"
-  }
-
-  if {[info exists errors]} { return [join $errors "\n"] }
-  return "ok"
-}
-
-# USAGE: fts3_terms TBL WHERE
-#
-# Argument TBL must be the name of an FTS3 table. Argument WHERE is an
-# SQL expression that will be used as the WHERE clause when scanning
-# the %_segdir table. As in the following query:
-#
-#   "SELECT * FROM ${TBL}_segdir WHERE ${WHERE}"
-#
-# This function returns a list of all terms present in the segments
-# selected by the statement above.
-#
-proc fts3_terms {tbl where} {
-  fts3_read $tbl $where a
-  return [lsort [array names a]]
-}
-
-
-# USAGE: fts3_doclist TBL TERM WHERE
-#
-# Argument TBL must be the name of an FTS3 table. TERM is a term that may
-# or may not be present in the table. Argument WHERE is used to select a 
-# subset of the b-tree segments in the associated full-text index as 
-# described above for [fts3_terms].
-#
-# This function returns the results of merging the doclists associated
-# with TERM in the selected segments. Each doclist is an element of the
-# returned list. Each doclist is formatted as follows:
-#
-#   [$docid ?$col[$off1 $off2...]?...]
-#
-# The formatting is odd for a Tcl command in order to be compatible with
-# the original C-language implementation. If argument WHERE is "1", then 
-# any empty doclists are omitted from the returned list.
-#
-proc fts3_doclist {tbl term where} {
-  fts3_read $tbl $where a
-
-
-  foreach doclist $a($term) {
-    set docid 0
-
-    while {[string length $doclist]>0} {
-      set iCol 0
-      set iPos 0
-      set lPos [list]
-      set lCol [list]
-      incr docid [gobble_varint doclist]
-  
-      while {[set iDelta [gobble_varint doclist]] > 0} {
-        if {$iDelta == 1} {
-          lappend lCol [list $iCol $lPos]
-          set iPos 0
-          set lPos [list]
-          set iCol [gobble_varint doclist]
-        } else {
-          incr iPos $iDelta
-          incr iPos -2
-          lappend lPos $iPos
-        }
-      }
-  
-      if {[llength $lPos]>0} {
-        lappend lCol [list $iCol $lPos]
-      }
-  
-      if {$where != "1" || [llength $lCol]>0} {
-        set ret($docid) $lCol
-      } else {
-        unset -nocomplain ret($docid)
-      }
-    }
-  }
-
-  set lDoc [list]
-  foreach docid [lsort -integer [array names ret]] {
-    set lCol [list]
-    set cols ""
-    foreach col $ret($docid) {
-      foreach {iCol lPos} $col {}
-      append cols " $iCol\[[join $lPos { }]\]"
-    }
-    lappend lDoc "\[${docid}${cols}\]"
-  }
-
-  join $lDoc " "
-}
-
-###########################################################################
-
-proc gobble_varint {varname} {
-  upvar $varname blob
-  set n [read_fts3varint $blob ret]
-  set blob [string range $blob $n end]
-  return $ret
-}
-proc gobble_string {varname nLength} {
-  upvar $varname blob
-  set ret [string range $blob 0 [expr $nLength-1]]
-  set blob [string range $blob $nLength end]
-  return $ret
-}
-
-# The argument is a blob of data representing an FTS3 segment leaf. 
-# Return a list consisting of alternating terms (strings) and doclists
-# (blobs of data).
-#
-proc fts3_readleaf {blob} {
-  set zPrev ""
-  set terms [list]
-
-  while {[string length $blob] > 0} {
-    set nPrefix [gobble_varint blob]
-    set nSuffix [gobble_varint blob]
-
-    set zTerm [string range $zPrev 0 [expr $nPrefix-1]]
-    append zTerm [gobble_string blob $nSuffix]
-    set nDoclist [gobble_varint blob]
-    set doclist [gobble_string blob $nDoclist]
-
-    lappend terms $zTerm $doclist
-    set zPrev $zTerm
-  }
-
-  return $terms
-}
-
-proc fts3_read2 {tbl where varname} {
-  upvar $varname a
-  array unset a
-  db eval " SELECT start_block, leaves_end_block, root 
-            FROM ${tbl}_segdir WHERE $where
-            ORDER BY level ASC, idx DESC
-  " {
-    set c 0
-    binary scan $root c c
-    if {$c==0} {
-      foreach {t d} [fts3_readleaf $root] { lappend a($t) $d }
-    } else {
-      db eval " SELECT block 
-                FROM ${tbl}_segments 
-                WHERE blockid>=$start_block AND blockid<=$leaves_end_block
-                ORDER BY blockid
-      " {
-        foreach {t d} [fts3_readleaf $block] { lappend a($t) $d }
-      }
-    }
-  }
-}
-
-proc fts3_read {tbl where varname} {
-  upvar $varname a
-  array unset a
-  db eval " SELECT start_block, leaves_end_block, root 
-            FROM ${tbl}_segdir WHERE $where
-            ORDER BY level DESC, idx ASC
-  " {
-    if {$start_block == 0} {
-      foreach {t d} [fts3_readleaf $root] { lappend a($t) $d }
-    } else {
-      db eval " SELECT block 
-                FROM ${tbl}_segments 
-                WHERE blockid>=$start_block AND blockid<$leaves_end_block
-                ORDER BY blockid
-      " {
-        foreach {t d} [fts3_readleaf $block] { lappend a($t) $d }
-
-      }
-    }
-  }
-}
-
-##########################################################################
-