[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/ext/fts3/fts3_expr.c

Index: third_party/sqlite/sqlite-src-3080704/ext/fts3/fts3_expr.c
diff --git a/third_party/sqlite/sqlite-src-3080704/ext/fts3/fts3_expr.c b/third_party/sqlite/sqlite-src-3080704/ext/fts3/fts3_expr.c
deleted file mode 100644
index 2ba786ce8092147b9b371b26929dda6f167ef3be..0000000000000000000000000000000000000000
--- a/third_party/sqlite/sqlite-src-3080704/ext/fts3/fts3_expr.c
+++ /dev/null
@@ -1,1283 +0,0 @@
-/*
-** 2008 Nov 28
-**
-** The author disclaims copyright to this source code.  In place of
-** a legal notice, here is a blessing:
-**
-**    May you do good and not evil.
-**    May you find forgiveness for yourself and forgive others.
-**    May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This module contains code that implements a parser for fts3 query strings
-** (the right-hand argument to the MATCH operator). Because the supported 
-** syntax is relatively simple, the whole tokenizer/parser system is
-** hand-coded. 
-*/
-#include "fts3Int.h"
-#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3)
-
-/*
-** By default, this module parses the legacy syntax that has been 
-** traditionally used by fts3. Or, if SQLITE_ENABLE_FTS3_PARENTHESIS
-** is defined, then it uses the new syntax. The differences between
-** the new and the old syntaxes are:
-**
-**  a) The new syntax supports parenthesis. The old does not.
-**
-**  b) The new syntax supports the AND and NOT operators. The old does not.
-**
-**  c) The old syntax supports the "-" token qualifier. This is not 
-**     supported by the new syntax (it is replaced by the NOT operator).
-**
-**  d) When using the old syntax, the OR operator has a greater precedence
-**     than an implicit AND. When using the new, both implicity and explicit
-**     AND operators have a higher precedence than OR.
-**
-** If compiled with SQLITE_TEST defined, then this module exports the
-** symbol "int sqlite3_fts3_enable_parentheses". Setting this variable
-** to zero causes the module to use the old syntax. If it is set to 
-** non-zero the new syntax is activated. This is so both syntaxes can
-** be tested using a single build of testfixture.
-**
-** The following describes the syntax supported by the fts3 MATCH
-** operator in a similar format to that used by the lemon parser
-** generator. This module does not use actually lemon, it uses a
-** custom parser.
-**
-**   query ::= andexpr (OR andexpr)*.
-**
-**   andexpr ::= notexpr (AND? notexpr)*.
-**
-**   notexpr ::= nearexpr (NOT nearexpr|-TOKEN)*.
-**   notexpr ::= LP query RP.
-**
-**   nearexpr ::= phrase (NEAR distance_opt nearexpr)*.
-**
-**   distance_opt ::= .
-**   distance_opt ::= / INTEGER.
-**
-**   phrase ::= TOKEN.
-**   phrase ::= COLUMN:TOKEN.
-**   phrase ::= "TOKEN TOKEN TOKEN...".
-*/
-
-#ifdef SQLITE_TEST
-int sqlite3_fts3_enable_parentheses = 0;
-#else
-# ifdef SQLITE_ENABLE_FTS3_PARENTHESIS 
-#  define sqlite3_fts3_enable_parentheses 1
-# else
-#  define sqlite3_fts3_enable_parentheses 0
-# endif
-#endif
-
-/*
-** Default span for NEAR operators.
-*/
-#define SQLITE_FTS3_DEFAULT_NEAR_PARAM 10
-
-#include <string.h>
-#include <assert.h>
-
-/*
-** isNot:
-**   This variable is used by function getNextNode(). When getNextNode() is
-**   called, it sets ParseContext.isNot to true if the 'next node' is a 
-**   FTSQUERY_PHRASE with a unary "-" attached to it. i.e. "mysql" in the
-**   FTS3 query "sqlite -mysql". Otherwise, ParseContext.isNot is set to
-**   zero.
-*/
-typedef struct ParseContext ParseContext;
-struct ParseContext {
-  sqlite3_tokenizer *pTokenizer;      /* Tokenizer module */
-  int iLangid;                        /* Language id used with tokenizer */
-  const char **azCol;                 /* Array of column names for fts3 table */
-  int bFts4;                          /* True to allow FTS4-only syntax */
-  int nCol;                           /* Number of entries in azCol[] */
-  int iDefaultCol;                    /* Default column to query */
-  int isNot;                          /* True if getNextNode() sees a unary - */
-  sqlite3_context *pCtx;              /* Write error message here */
-  int nNest;                          /* Number of nested brackets */
-};
-
-/*
-** This function is equivalent to the standard isspace() function. 
-**
-** The standard isspace() can be awkward to use safely, because although it
-** is defined to accept an argument of type int, its behavior when passed
-** an integer that falls outside of the range of the unsigned char type
-** is undefined (and sometimes, "undefined" means segfault). This wrapper
-** is defined to accept an argument of type char, and always returns 0 for
-** any values that fall outside of the range of the unsigned char type (i.e.
-** negative values).
-*/
-static int fts3isspace(char c){
-  return c==' ' || c=='\t' || c=='\n' || c=='\r' || c=='\v' || c=='\f';
-}
-
-/*
-** Allocate nByte bytes of memory using sqlite3_malloc(). If successful,
-** zero the memory before returning a pointer to it. If unsuccessful, 
-** return NULL.
-*/
-static void *fts3MallocZero(int nByte){
-  void *pRet = sqlite3_malloc(nByte);
-  if( pRet ) memset(pRet, 0, nByte);
-  return pRet;
-}
-
-int sqlite3Fts3OpenTokenizer(
-  sqlite3_tokenizer *pTokenizer,
-  int iLangid,
-  const char *z,
-  int n,
-  sqlite3_tokenizer_cursor **ppCsr
-){
-  sqlite3_tokenizer_module const *pModule = pTokenizer->pModule;
-  sqlite3_tokenizer_cursor *pCsr = 0;
-  int rc;
-
-  rc = pModule->xOpen(pTokenizer, z, n, &pCsr);
-  assert( rc==SQLITE_OK || pCsr==0 );
-  if( rc==SQLITE_OK ){
-    pCsr->pTokenizer = pTokenizer;
-    if( pModule->iVersion>=1 ){
-      rc = pModule->xLanguageid(pCsr, iLangid);
-      if( rc!=SQLITE_OK ){
-        pModule->xClose(pCsr);
-        pCsr = 0;
-      }
-    }
-  }
-  *ppCsr = pCsr;
-  return rc;
-}
-
-/*
-** Function getNextNode(), which is called by fts3ExprParse(), may itself
-** call fts3ExprParse(). So this forward declaration is required.
-*/
-static int fts3ExprParse(ParseContext *, const char *, int, Fts3Expr **, int *);
-
-/*
-** Extract the next token from buffer z (length n) using the tokenizer
-** and other information (column names etc.) in pParse. Create an Fts3Expr
-** structure of type FTSQUERY_PHRASE containing a phrase consisting of this
-** single token and set *ppExpr to point to it. If the end of the buffer is
-** reached before a token is found, set *ppExpr to zero. It is the
-** responsibility of the caller to eventually deallocate the allocated 
-** Fts3Expr structure (if any) by passing it to sqlite3_free().
-**
-** Return SQLITE_OK if successful, or SQLITE_NOMEM if a memory allocation
-** fails.
-*/
-static int getNextToken(
-  ParseContext *pParse,                   /* fts3 query parse context */
-  int iCol,                               /* Value for Fts3Phrase.iColumn */
-  const char *z, int n,                   /* Input string */
-  Fts3Expr **ppExpr,                      /* OUT: expression */
-  int *pnConsumed                         /* OUT: Number of bytes consumed */
-){
-  sqlite3_tokenizer *pTokenizer = pParse->pTokenizer;
-  sqlite3_tokenizer_module const *pModule = pTokenizer->pModule;
-  int rc;
-  sqlite3_tokenizer_cursor *pCursor;
-  Fts3Expr *pRet = 0;
-  int i = 0;
-
-  /* Set variable i to the maximum number of bytes of input to tokenize. */
-  for(i=0; i<n; i++){
-    if( sqlite3_fts3_enable_parentheses && (z[i]=='(' || z[i]==')') ) break;
-    if( z[i]=='"' ) break;
-  }
-
-  *pnConsumed = i;
-  rc = sqlite3Fts3OpenTokenizer(pTokenizer, pParse->iLangid, z, i, &pCursor);
-  if( rc==SQLITE_OK ){
-    const char *zToken;
-    int nToken = 0, iStart = 0, iEnd = 0, iPosition = 0;
-    int nByte;                               /* total space to allocate */
-
-    rc = pModule->xNext(pCursor, &zToken, &nToken, &iStart, &iEnd, &iPosition);
-    if( rc==SQLITE_OK ){
-      nByte = sizeof(Fts3Expr) + sizeof(Fts3Phrase) + nToken;
-      pRet = (Fts3Expr *)fts3MallocZero(nByte);
-      if( !pRet ){
-        rc = SQLITE_NOMEM;
-      }else{
-        pRet->eType = FTSQUERY_PHRASE;
-        pRet->pPhrase = (Fts3Phrase *)&pRet[1];
-        pRet->pPhrase->nToken = 1;
-        pRet->pPhrase->iColumn = iCol;
-        pRet->pPhrase->aToken[0].n = nToken;
-        pRet->pPhrase->aToken[0].z = (char *)&pRet->pPhrase[1];
-        memcpy(pRet->pPhrase->aToken[0].z, zToken, nToken);
-
-        if( iEnd<n && z[iEnd]=='*' ){
-          pRet->pPhrase->aToken[0].isPrefix = 1;
-          iEnd++;
-        }
-
-        while( 1 ){
-          if( !sqlite3_fts3_enable_parentheses 
-           && iStart>0 && z[iStart-1]=='-' 
-          ){
-            pParse->isNot = 1;
-            iStart--;
-          }else if( pParse->bFts4 && iStart>0 && z[iStart-1]=='^' ){
-            pRet->pPhrase->aToken[0].bFirst = 1;
-            iStart--;
-          }else{
-            break;
-          }
-        }
-
-      }
-      *pnConsumed = iEnd;
-    }else if( i && rc==SQLITE_DONE ){
-      rc = SQLITE_OK;
-    }
-
-    pModule->xClose(pCursor);
-  }
-  
-  *ppExpr = pRet;
-  return rc;
-}
-
-
-/*
-** Enlarge a memory allocation.  If an out-of-memory allocation occurs,
-** then free the old allocation.
-*/
-static void *fts3ReallocOrFree(void *pOrig, int nNew){
-  void *pRet = sqlite3_realloc(pOrig, nNew);
-  if( !pRet ){
-    sqlite3_free(pOrig);
-  }
-  return pRet;
-}
-
-/*
-** Buffer zInput, length nInput, contains the contents of a quoted string
-** that appeared as part of an fts3 query expression. Neither quote character
-** is included in the buffer. This function attempts to tokenize the entire
-** input buffer and create an Fts3Expr structure of type FTSQUERY_PHRASE 
-** containing the results.
-**
-** If successful, SQLITE_OK is returned and *ppExpr set to point at the
-** allocated Fts3Expr structure. Otherwise, either SQLITE_NOMEM (out of memory
-** error) or SQLITE_ERROR (tokenization error) is returned and *ppExpr set
-** to 0.
-*/
-static int getNextString(
-  ParseContext *pParse,                   /* fts3 query parse context */
-  const char *zInput, int nInput,         /* Input string */
-  Fts3Expr **ppExpr                       /* OUT: expression */
-){
-  sqlite3_tokenizer *pTokenizer = pParse->pTokenizer;
-  sqlite3_tokenizer_module const *pModule = pTokenizer->pModule;
-  int rc;
-  Fts3Expr *p = 0;
-  sqlite3_tokenizer_cursor *pCursor = 0;
-  char *zTemp = 0;
-  int nTemp = 0;
-
-  const int nSpace = sizeof(Fts3Expr) + sizeof(Fts3Phrase);
-  int nToken = 0;
-
-  /* The final Fts3Expr data structure, including the Fts3Phrase,
-  ** Fts3PhraseToken structures token buffers are all stored as a single 
-  ** allocation so that the expression can be freed with a single call to
-  ** sqlite3_free(). Setting this up requires a two pass approach.
-  **
-  ** The first pass, in the block below, uses a tokenizer cursor to iterate
-  ** through the tokens in the expression. This pass uses fts3ReallocOrFree()
-  ** to assemble data in two dynamic buffers:
-  **
-  **   Buffer p: Points to the Fts3Expr structure, followed by the Fts3Phrase
-  **             structure, followed by the array of Fts3PhraseToken 
-  **             structures. This pass only populates the Fts3PhraseToken array.
-  **
-  **   Buffer zTemp: Contains copies of all tokens.
-  **
-  ** The second pass, in the block that begins "if( rc==SQLITE_DONE )" below,
-  ** appends buffer zTemp to buffer p, and fills in the Fts3Expr and Fts3Phrase
-  ** structures.
-  */
-  rc = sqlite3Fts3OpenTokenizer(
-      pTokenizer, pParse->iLangid, zInput, nInput, &pCursor);
-  if( rc==SQLITE_OK ){
-    int ii;
-    for(ii=0; rc==SQLITE_OK; ii++){
-      const char *zByte;
-      int nByte = 0, iBegin = 0, iEnd = 0, iPos = 0;
-      rc = pModule->xNext(pCursor, &zByte, &nByte, &iBegin, &iEnd, &iPos);
-      if( rc==SQLITE_OK ){
-        Fts3PhraseToken *pToken;
-
-        p = fts3ReallocOrFree(p, nSpace + ii*sizeof(Fts3PhraseToken));
-        if( !p ) goto no_mem;
-
-        zTemp = fts3ReallocOrFree(zTemp, nTemp + nByte);
-        if( !zTemp ) goto no_mem;
-
-        assert( nToken==ii );
-        pToken = &((Fts3Phrase *)(&p[1]))->aToken[ii];
-        memset(pToken, 0, sizeof(Fts3PhraseToken));
-
-        memcpy(&zTemp[nTemp], zByte, nByte);
-        nTemp += nByte;
-
-        pToken->n = nByte;
-        pToken->isPrefix = (iEnd<nInput && zInput[iEnd]=='*');
-        pToken->bFirst = (iBegin>0 && zInput[iBegin-1]=='^');
-        nToken = ii+1;
-      }
-    }
-
-    pModule->xClose(pCursor);
-    pCursor = 0;
-  }
-
-  if( rc==SQLITE_DONE ){
-    int jj;
-    char *zBuf = 0;
-
-    p = fts3ReallocOrFree(p, nSpace + nToken*sizeof(Fts3PhraseToken) + nTemp);
-    if( !p ) goto no_mem;
-    memset(p, 0, (char *)&(((Fts3Phrase *)&p[1])->aToken[0])-(char *)p);
-    p->eType = FTSQUERY_PHRASE;
-    p->pPhrase = (Fts3Phrase *)&p[1];
-    p->pPhrase->iColumn = pParse->iDefaultCol;
-    p->pPhrase->nToken = nToken;
-
-    zBuf = (char *)&p->pPhrase->aToken[nToken];
-    if( zTemp ){
-      memcpy(zBuf, zTemp, nTemp);
-      sqlite3_free(zTemp);
-    }else{
-      assert( nTemp==0 );
-    }
-
-    for(jj=0; jj<p->pPhrase->nToken; jj++){
-      p->pPhrase->aToken[jj].z = zBuf;
-      zBuf += p->pPhrase->aToken[jj].n;
-    }
-    rc = SQLITE_OK;
-  }
-
-  *ppExpr = p;
-  return rc;
-no_mem:
-
-  if( pCursor ){
-    pModule->xClose(pCursor);
-  }
-  sqlite3_free(zTemp);
-  sqlite3_free(p);
-  *ppExpr = 0;
-  return SQLITE_NOMEM;
-}
-
-/*
-** The output variable *ppExpr is populated with an allocated Fts3Expr 
-** structure, or set to 0 if the end of the input buffer is reached.
-**
-** Returns an SQLite error code. SQLITE_OK if everything works, SQLITE_NOMEM
-** if a malloc failure occurs, or SQLITE_ERROR if a parse error is encountered.
-** If SQLITE_ERROR is returned, pContext is populated with an error message.
-*/
-static int getNextNode(
-  ParseContext *pParse,                   /* fts3 query parse context */
-  const char *z, int n,                   /* Input string */
-  Fts3Expr **ppExpr,                      /* OUT: expression */
-  int *pnConsumed                         /* OUT: Number of bytes consumed */
-){
-  static const struct Fts3Keyword {
-    char *z;                              /* Keyword text */
-    unsigned char n;                      /* Length of the keyword */
-    unsigned char parenOnly;              /* Only valid in paren mode */
-    unsigned char eType;                  /* Keyword code */
-  } aKeyword[] = {
-    { "OR" ,  2, 0, FTSQUERY_OR   },
-    { "AND",  3, 1, FTSQUERY_AND  },
-    { "NOT",  3, 1, FTSQUERY_NOT  },
-    { "NEAR", 4, 0, FTSQUERY_NEAR }
-  };
-  int ii;
-  int iCol;
-  int iColLen;
-  int rc;
-  Fts3Expr *pRet = 0;
-
-  const char *zInput = z;
-  int nInput = n;
-
-  pParse->isNot = 0;
-
-  /* Skip over any whitespace before checking for a keyword, an open or
-  ** close bracket, or a quoted string. 
-  */
-  while( nInput>0 && fts3isspace(*zInput) ){
-    nInput--;
-    zInput++;
-  }
-  if( nInput==0 ){
-    return SQLITE_DONE;
-  }
-
-  /* See if we are dealing with a keyword. */
-  for(ii=0; ii<(int)(sizeof(aKeyword)/sizeof(struct Fts3Keyword)); ii++){
-    const struct Fts3Keyword *pKey = &aKeyword[ii];
-
-    if( (pKey->parenOnly & ~sqlite3_fts3_enable_parentheses)!=0 ){
-      continue;
-    }
-
-    if( nInput>=pKey->n && 0==memcmp(zInput, pKey->z, pKey->n) ){
-      int nNear = SQLITE_FTS3_DEFAULT_NEAR_PARAM;
-      int nKey = pKey->n;
-      char cNext;
-
-      /* If this is a "NEAR" keyword, check for an explicit nearness. */
-      if( pKey->eType==FTSQUERY_NEAR ){
-        assert( nKey==4 );
-        if( zInput[4]=='/' && zInput[5]>='0' && zInput[5]<='9' ){
-          nNear = 0;
-          for(nKey=5; zInput[nKey]>='0' && zInput[nKey]<='9'; nKey++){
-            nNear = nNear * 10 + (zInput[nKey] - '0');
-          }
-        }
-      }
-
-      /* At this point this is probably a keyword. But for that to be true,
-      ** the next byte must contain either whitespace, an open or close
-      ** parenthesis, a quote character, or EOF. 
-      */
-      cNext = zInput[nKey];
-      if( fts3isspace(cNext) 
-       || cNext=='"' || cNext=='(' || cNext==')' || cNext==0
-      ){
-        pRet = (Fts3Expr *)fts3MallocZero(sizeof(Fts3Expr));
-        if( !pRet ){
-          return SQLITE_NOMEM;
-        }
-        pRet->eType = pKey->eType;
-        pRet->nNear = nNear;
-        *ppExpr = pRet;
-        *pnConsumed = (int)((zInput - z) + nKey);
-        return SQLITE_OK;
-      }
-
-      /* Turns out that wasn't a keyword after all. This happens if the
-      ** user has supplied a token such as "ORacle". Continue.
-      */
-    }
-  }
-
-  /* See if we are dealing with a quoted phrase. If this is the case, then
-  ** search for the closing quote and pass the whole string to getNextString()
-  ** for processing. This is easy to do, as fts3 has no syntax for escaping
-  ** a quote character embedded in a string.
-  */
-  if( *zInput=='"' ){
-    for(ii=1; ii<nInput && zInput[ii]!='"'; ii++);
-    *pnConsumed = (int)((zInput - z) + ii + 1);
-    if( ii==nInput ){
-      return SQLITE_ERROR;
-    }
-    return getNextString(pParse, &zInput[1], ii-1, ppExpr);
-  }
-
-  if( sqlite3_fts3_enable_parentheses ){
-    if( *zInput=='(' ){
-      int nConsumed = 0;
-      pParse->nNest++;
-      rc = fts3ExprParse(pParse, zInput+1, nInput-1, ppExpr, &nConsumed);
-      if( rc==SQLITE_OK && !*ppExpr ){ rc = SQLITE_DONE; }
-      *pnConsumed = (int)(zInput - z) + 1 + nConsumed;
-      return rc;
-    }else if( *zInput==')' ){
-      pParse->nNest--;
-      *pnConsumed = (int)((zInput - z) + 1);
-      *ppExpr = 0;
-      return SQLITE_DONE;
-    }
-  }
-
-  /* If control flows to this point, this must be a regular token, or 
-  ** the end of the input. Read a regular token using the sqlite3_tokenizer
-  ** interface. Before doing so, figure out if there is an explicit
-  ** column specifier for the token. 
-  **
-  ** TODO: Strangely, it is not possible to associate a column specifier
-  ** with a quoted phrase, only with a single token. Not sure if this was
-  ** an implementation artifact or an intentional decision when fts3 was
-  ** first implemented. Whichever it was, this module duplicates the 
-  ** limitation.
-  */
-  iCol = pParse->iDefaultCol;
-  iColLen = 0;
-  for(ii=0; ii<pParse->nCol; ii++){
-    const char *zStr = pParse->azCol[ii];
-    int nStr = (int)strlen(zStr);
-    if( nInput>nStr && zInput[nStr]==':' 
-     && sqlite3_strnicmp(zStr, zInput, nStr)==0 
-    ){
-      iCol = ii;
-      iColLen = (int)((zInput - z) + nStr + 1);
-      break;
-    }
-  }
-  rc = getNextToken(pParse, iCol, &z[iColLen], n-iColLen, ppExpr, pnConsumed);
-  *pnConsumed += iColLen;
-  return rc;
-}
-
-/*
-** The argument is an Fts3Expr structure for a binary operator (any type
-** except an FTSQUERY_PHRASE). Return an integer value representing the
-** precedence of the operator. Lower values have a higher precedence (i.e.
-** group more tightly). For example, in the C language, the == operator
-** groups more tightly than ||, and would therefore have a higher precedence.
-**
-** When using the new fts3 query syntax (when SQLITE_ENABLE_FTS3_PARENTHESIS
-** is defined), the order of the operators in precedence from highest to
-** lowest is:
-**
-**   NEAR
-**   NOT
-**   AND (including implicit ANDs)
-**   OR
-**
-** Note that when using the old query syntax, the OR operator has a higher
-** precedence than the AND operator.
-*/
-static int opPrecedence(Fts3Expr *p){
-  assert( p->eType!=FTSQUERY_PHRASE );
-  if( sqlite3_fts3_enable_parentheses ){
-    return p->eType;
-  }else if( p->eType==FTSQUERY_NEAR ){
-    return 1;
-  }else if( p->eType==FTSQUERY_OR ){
-    return 2;
-  }
-  assert( p->eType==FTSQUERY_AND );
-  return 3;
-}
-
-/*
-** Argument ppHead contains a pointer to the current head of a query 
-** expression tree being parsed. pPrev is the expression node most recently
-** inserted into the tree. This function adds pNew, which is always a binary
-** operator node, into the expression tree based on the relative precedence
-** of pNew and the existing nodes of the tree. This may result in the head
-** of the tree changing, in which case *ppHead is set to the new root node.
-*/
-static void insertBinaryOperator(
-  Fts3Expr **ppHead,       /* Pointer to the root node of a tree */
-  Fts3Expr *pPrev,         /* Node most recently inserted into the tree */
-  Fts3Expr *pNew           /* New binary node to insert into expression tree */
-){
-  Fts3Expr *pSplit = pPrev;
-  while( pSplit->pParent && opPrecedence(pSplit->pParent)<=opPrecedence(pNew) ){
-    pSplit = pSplit->pParent;
-  }
-
-  if( pSplit->pParent ){
-    assert( pSplit->pParent->pRight==pSplit );
-    pSplit->pParent->pRight = pNew;
-    pNew->pParent = pSplit->pParent;
-  }else{
-    *ppHead = pNew;
-  }
-  pNew->pLeft = pSplit;
-  pSplit->pParent = pNew;
-}
-
-/*
-** Parse the fts3 query expression found in buffer z, length n. This function
-** returns either when the end of the buffer is reached or an unmatched 
-** closing bracket - ')' - is encountered.
-**
-** If successful, SQLITE_OK is returned, *ppExpr is set to point to the
-** parsed form of the expression and *pnConsumed is set to the number of
-** bytes read from buffer z. Otherwise, *ppExpr is set to 0 and SQLITE_NOMEM
-** (out of memory error) or SQLITE_ERROR (parse error) is returned.
-*/
-static int fts3ExprParse(
-  ParseContext *pParse,                   /* fts3 query parse context */
-  const char *z, int n,                   /* Text of MATCH query */
-  Fts3Expr **ppExpr,                      /* OUT: Parsed query structure */
-  int *pnConsumed                         /* OUT: Number of bytes consumed */
-){
-  Fts3Expr *pRet = 0;
-  Fts3Expr *pPrev = 0;
-  Fts3Expr *pNotBranch = 0;               /* Only used in legacy parse mode */
-  int nIn = n;
-  const char *zIn = z;
-  int rc = SQLITE_OK;
-  int isRequirePhrase = 1;
-
-  while( rc==SQLITE_OK ){
-    Fts3Expr *p = 0;
-    int nByte = 0;
-
-    rc = getNextNode(pParse, zIn, nIn, &p, &nByte);
-    assert( nByte>0 || (rc!=SQLITE_OK && p==0) );
-    if( rc==SQLITE_OK ){
-      if( p ){
-        int isPhrase;
-
-        if( !sqlite3_fts3_enable_parentheses 
-            && p->eType==FTSQUERY_PHRASE && pParse->isNot 
-        ){
-          /* Create an implicit NOT operator. */
-          Fts3Expr *pNot = fts3MallocZero(sizeof(Fts3Expr));
-          if( !pNot ){
-            sqlite3Fts3ExprFree(p);
-            rc = SQLITE_NOMEM;
-            goto exprparse_out;
-          }
-          pNot->eType = FTSQUERY_NOT;
-          pNot->pRight = p;
-          p->pParent = pNot;
-          if( pNotBranch ){
-            pNot->pLeft = pNotBranch;
-            pNotBranch->pParent = pNot;
-          }
-          pNotBranch = pNot;
-          p = pPrev;
-        }else{
-          int eType = p->eType;
-          isPhrase = (eType==FTSQUERY_PHRASE || p->pLeft);
-
-          /* The isRequirePhrase variable is set to true if a phrase or
-          ** an expression contained in parenthesis is required. If a
-          ** binary operator (AND, OR, NOT or NEAR) is encounted when
-          ** isRequirePhrase is set, this is a syntax error.
-          */
-          if( !isPhrase && isRequirePhrase ){
-            sqlite3Fts3ExprFree(p);
-            rc = SQLITE_ERROR;
-            goto exprparse_out;
-          }
-
-          if( isPhrase && !isRequirePhrase ){
-            /* Insert an implicit AND operator. */
-            Fts3Expr *pAnd;
-            assert( pRet && pPrev );
-            pAnd = fts3MallocZero(sizeof(Fts3Expr));
-            if( !pAnd ){
-              sqlite3Fts3ExprFree(p);
-              rc = SQLITE_NOMEM;
-              goto exprparse_out;
-            }
-            pAnd->eType = FTSQUERY_AND;
-            insertBinaryOperator(&pRet, pPrev, pAnd);
-            pPrev = pAnd;
-          }
-
-          /* This test catches attempts to make either operand of a NEAR
-           ** operator something other than a phrase. For example, either of
-           ** the following:
-           **
-           **    (bracketed expression) NEAR phrase
-           **    phrase NEAR (bracketed expression)
-           **
-           ** Return an error in either case.
-           */
-          if( pPrev && (
-            (eType==FTSQUERY_NEAR && !isPhrase && pPrev->eType!=FTSQUERY_PHRASE)
-         || (eType!=FTSQUERY_PHRASE && isPhrase && pPrev->eType==FTSQUERY_NEAR)
-          )){
-            sqlite3Fts3ExprFree(p);
-            rc = SQLITE_ERROR;
-            goto exprparse_out;
-          }
-
-          if( isPhrase ){
-            if( pRet ){
-              assert( pPrev && pPrev->pLeft && pPrev->pRight==0 );
-              pPrev->pRight = p;
-              p->pParent = pPrev;
-            }else{
-              pRet = p;
-            }
-          }else{
-            insertBinaryOperator(&pRet, pPrev, p);
-          }
-          isRequirePhrase = !isPhrase;
-        }
-        pPrev = p;
-      }
-      assert( nByte>0 );
-    }
-    assert( rc!=SQLITE_OK || (nByte>0 && nByte<=nIn) );
-    nIn -= nByte;
-    zIn += nByte;
-  }
-
-  if( rc==SQLITE_DONE && pRet && isRequirePhrase ){
-    rc = SQLITE_ERROR;
-  }
-
-  if( rc==SQLITE_DONE ){
-    rc = SQLITE_OK;
-    if( !sqlite3_fts3_enable_parentheses && pNotBranch ){
-      if( !pRet ){
-        rc = SQLITE_ERROR;
-      }else{
-        Fts3Expr *pIter = pNotBranch;
-        while( pIter->pLeft ){
-          pIter = pIter->pLeft;
-        }
-        pIter->pLeft = pRet;
-        pRet->pParent = pIter;
-        pRet = pNotBranch;
-      }
-    }
-  }
-  *pnConsumed = n - nIn;
-
-exprparse_out:
-  if( rc!=SQLITE_OK ){
-    sqlite3Fts3ExprFree(pRet);
-    sqlite3Fts3ExprFree(pNotBranch);
-    pRet = 0;
-  }
-  *ppExpr = pRet;
-  return rc;
-}
-
-/*
-** Return SQLITE_ERROR if the maximum depth of the expression tree passed 
-** as the only argument is more than nMaxDepth.
-*/
-static int fts3ExprCheckDepth(Fts3Expr *p, int nMaxDepth){
-  int rc = SQLITE_OK;
-  if( p ){
-    if( nMaxDepth<0 ){ 
-      rc = SQLITE_TOOBIG;
-    }else{
-      rc = fts3ExprCheckDepth(p->pLeft, nMaxDepth-1);
-      if( rc==SQLITE_OK ){
-        rc = fts3ExprCheckDepth(p->pRight, nMaxDepth-1);
-      }
-    }
-  }
-  return rc;
-}
-
-/*
-** This function attempts to transform the expression tree at (*pp) to
-** an equivalent but more balanced form. The tree is modified in place.
-** If successful, SQLITE_OK is returned and (*pp) set to point to the 
-** new root expression node. 
-**
-** nMaxDepth is the maximum allowable depth of the balanced sub-tree.
-**
-** Otherwise, if an error occurs, an SQLite error code is returned and 
-** expression (*pp) freed.
-*/
-static int fts3ExprBalance(Fts3Expr **pp, int nMaxDepth){
-  int rc = SQLITE_OK;             /* Return code */
-  Fts3Expr *pRoot = *pp;          /* Initial root node */
-  Fts3Expr *pFree = 0;            /* List of free nodes. Linked by pParent. */
-  int eType = pRoot->eType;       /* Type of node in this tree */
-
-  if( nMaxDepth==0 ){
-    rc = SQLITE_ERROR;
-  }
-
-  if( rc==SQLITE_OK && (eType==FTSQUERY_AND || eType==FTSQUERY_OR) ){
-    Fts3Expr **apLeaf;
-    apLeaf = (Fts3Expr **)sqlite3_malloc(sizeof(Fts3Expr *) * nMaxDepth);
-    if( 0==apLeaf ){
-      rc = SQLITE_NOMEM;
-    }else{
-      memset(apLeaf, 0, sizeof(Fts3Expr *) * nMaxDepth);
-    }
-
-    if( rc==SQLITE_OK ){
-      int i;
-      Fts3Expr *p;
-
-      /* Set $p to point to the left-most leaf in the tree of eType nodes. */
-      for(p=pRoot; p->eType==eType; p=p->pLeft){
-        assert( p->pParent==0 || p->pParent->pLeft==p );
-        assert( p->pLeft && p->pRight );
-      }
-
-      /* This loop runs once for each leaf in the tree of eType nodes. */
-      while( 1 ){
-        int iLvl;
-        Fts3Expr *pParent = p->pParent;     /* Current parent of p */
-
-        assert( pParent==0 || pParent->pLeft==p );
-        p->pParent = 0;
-        if( pParent ){
-          pParent->pLeft = 0;
-        }else{
-          pRoot = 0;
-        }
-        rc = fts3ExprBalance(&p, nMaxDepth-1);
-        if( rc!=SQLITE_OK ) break;
-
-        for(iLvl=0; p && iLvl<nMaxDepth; iLvl++){
-          if( apLeaf[iLvl]==0 ){
-            apLeaf[iLvl] = p;
-            p = 0;
-          }else{
-            assert( pFree );
-            pFree->pLeft = apLeaf[iLvl];
-            pFree->pRight = p;
-            pFree->pLeft->pParent = pFree;
-            pFree->pRight->pParent = pFree;
-
-            p = pFree;
-            pFree = pFree->pParent;
-            p->pParent = 0;
-            apLeaf[iLvl] = 0;
-          }
-        }
-        if( p ){
-          sqlite3Fts3ExprFree(p);
-          rc = SQLITE_TOOBIG;
-          break;
-        }
-
-        /* If that was the last leaf node, break out of the loop */
-        if( pParent==0 ) break;
-
-        /* Set $p to point to the next leaf in the tree of eType nodes */
-        for(p=pParent->pRight; p->eType==eType; p=p->pLeft);
-
-        /* Remove pParent from the original tree. */
-        assert( pParent->pParent==0 || pParent->pParent->pLeft==pParent );
-        pParent->pRight->pParent = pParent->pParent;
-        if( pParent->pParent ){
-          pParent->pParent->pLeft = pParent->pRight;
-        }else{
-          assert( pParent==pRoot );
-          pRoot = pParent->pRight;
-        }
-
-        /* Link pParent into the free node list. It will be used as an
-        ** internal node of the new tree.  */
-        pParent->pParent = pFree;
-        pFree = pParent;
-      }
-
-      if( rc==SQLITE_OK ){
-        p = 0;
-        for(i=0; i<nMaxDepth; i++){
-          if( apLeaf[i] ){
-            if( p==0 ){
-              p = apLeaf[i];
-              p->pParent = 0;
-            }else{
-              assert( pFree!=0 );
-              pFree->pRight = p;
-              pFree->pLeft = apLeaf[i];
-              pFree->pLeft->pParent = pFree;
-              pFree->pRight->pParent = pFree;
-
-              p = pFree;
-              pFree = pFree->pParent;
-              p->pParent = 0;
-            }
-          }
-        }
-        pRoot = p;
-      }else{
-        /* An error occurred. Delete the contents of the apLeaf[] array 
-        ** and pFree list. Everything else is cleaned up by the call to
-        ** sqlite3Fts3ExprFree(pRoot) below.  */
-        Fts3Expr *pDel;
-        for(i=0; i<nMaxDepth; i++){
-          sqlite3Fts3ExprFree(apLeaf[i]);
-        }
-        while( (pDel=pFree)!=0 ){
-          pFree = pDel->pParent;
-          sqlite3_free(pDel);
-        }
-      }
-
-      assert( pFree==0 );
-      sqlite3_free( apLeaf );
-    }
-  }
-
-  if( rc!=SQLITE_OK ){
-    sqlite3Fts3ExprFree(pRoot);
-    pRoot = 0;
-  }
-  *pp = pRoot;
-  return rc;
-}
-
-/*
-** This function is similar to sqlite3Fts3ExprParse(), with the following
-** differences:
-**
-**   1. It does not do expression rebalancing.
-**   2. It does not check that the expression does not exceed the 
-**      maximum allowable depth.
-**   3. Even if it fails, *ppExpr may still be set to point to an 
-**      expression tree. It should be deleted using sqlite3Fts3ExprFree()
-**      in this case.
-*/
-static int fts3ExprParseUnbalanced(
-  sqlite3_tokenizer *pTokenizer,      /* Tokenizer module */
-  int iLangid,                        /* Language id for tokenizer */
-  char **azCol,                       /* Array of column names for fts3 table */
-  int bFts4,                          /* True to allow FTS4-only syntax */
-  int nCol,                           /* Number of entries in azCol[] */
-  int iDefaultCol,                    /* Default column to query */
-  const char *z, int n,               /* Text of MATCH query */
-  Fts3Expr **ppExpr                   /* OUT: Parsed query structure */
-){
-  int nParsed;
-  int rc;
-  ParseContext sParse;
-
-  memset(&sParse, 0, sizeof(ParseContext));
-  sParse.pTokenizer = pTokenizer;
-  sParse.iLangid = iLangid;
-  sParse.azCol = (const char **)azCol;
-  sParse.nCol = nCol;
-  sParse.iDefaultCol = iDefaultCol;
-  sParse.bFts4 = bFts4;
-  if( z==0 ){
-    *ppExpr = 0;
-    return SQLITE_OK;
-  }
-  if( n<0 ){
-    n = (int)strlen(z);
-  }
-  rc = fts3ExprParse(&sParse, z, n, ppExpr, &nParsed);
-  assert( rc==SQLITE_OK || *ppExpr==0 );
-
-  /* Check for mismatched parenthesis */
-  if( rc==SQLITE_OK && sParse.nNest ){
-    rc = SQLITE_ERROR;
-  }
-  
-  return rc;
-}
-
-/*
-** Parameters z and n contain a pointer to and length of a buffer containing
-** an fts3 query expression, respectively. This function attempts to parse the
-** query expression and create a tree of Fts3Expr structures representing the
-** parsed expression. If successful, *ppExpr is set to point to the head
-** of the parsed expression tree and SQLITE_OK is returned. If an error
-** occurs, either SQLITE_NOMEM (out-of-memory error) or SQLITE_ERROR (parse
-** error) is returned and *ppExpr is set to 0.
-**
-** If parameter n is a negative number, then z is assumed to point to a
-** nul-terminated string and the length is determined using strlen().
-**
-** The first parameter, pTokenizer, is passed the fts3 tokenizer module to
-** use to normalize query tokens while parsing the expression. The azCol[]
-** array, which is assumed to contain nCol entries, should contain the names
-** of each column in the target fts3 table, in order from left to right. 
-** Column names must be nul-terminated strings.
-**
-** The iDefaultCol parameter should be passed the index of the table column
-** that appears on the left-hand-side of the MATCH operator (the default
-** column to match against for tokens for which a column name is not explicitly
-** specified as part of the query string), or -1 if tokens may by default
-** match any table column.
-*/
-int sqlite3Fts3ExprParse(
-  sqlite3_tokenizer *pTokenizer,      /* Tokenizer module */
-  int iLangid,                        /* Language id for tokenizer */
-  char **azCol,                       /* Array of column names for fts3 table */
-  int bFts4,                          /* True to allow FTS4-only syntax */
-  int nCol,                           /* Number of entries in azCol[] */
-  int iDefaultCol,                    /* Default column to query */
-  const char *z, int n,               /* Text of MATCH query */
-  Fts3Expr **ppExpr,                  /* OUT: Parsed query structure */
-  char **pzErr                        /* OUT: Error message (sqlite3_malloc) */
-){
-  int rc = fts3ExprParseUnbalanced(
-      pTokenizer, iLangid, azCol, bFts4, nCol, iDefaultCol, z, n, ppExpr
-  );
-  
-  /* Rebalance the expression. And check that its depth does not exceed
-  ** SQLITE_FTS3_MAX_EXPR_DEPTH.  */
-  if( rc==SQLITE_OK && *ppExpr ){
-    rc = fts3ExprBalance(ppExpr, SQLITE_FTS3_MAX_EXPR_DEPTH);
-    if( rc==SQLITE_OK ){
-      rc = fts3ExprCheckDepth(*ppExpr, SQLITE_FTS3_MAX_EXPR_DEPTH);
-    }
-  }
-
-  if( rc!=SQLITE_OK ){
-    sqlite3Fts3ExprFree(*ppExpr);
-    *ppExpr = 0;
-    if( rc==SQLITE_TOOBIG ){
-      *pzErr = sqlite3_mprintf(
-          "FTS expression tree is too large (maximum depth %d)", 
-          SQLITE_FTS3_MAX_EXPR_DEPTH
-      );
-      rc = SQLITE_ERROR;
-    }else if( rc==SQLITE_ERROR ){
-      *pzErr = sqlite3_mprintf("malformed MATCH expression: [%s]", z);
-    }
-  }
-
-  return rc;
-}
-
-/*
-** Free a single node of an expression tree.
-*/
-static void fts3FreeExprNode(Fts3Expr *p){
-  assert( p->eType==FTSQUERY_PHRASE || p->pPhrase==0 );
-  sqlite3Fts3EvalPhraseCleanup(p->pPhrase);
-  sqlite3_free(p->aMI);
-  sqlite3_free(p);
-}
-
-/*
-** Free a parsed fts3 query expression allocated by sqlite3Fts3ExprParse().
-**
-** This function would be simpler if it recursively called itself. But
-** that would mean passing a sufficiently large expression to ExprParse()
-** could cause a stack overflow.
-*/
-void sqlite3Fts3ExprFree(Fts3Expr *pDel){
-  Fts3Expr *p;
-  assert( pDel==0 || pDel->pParent==0 );
-  for(p=pDel; p && (p->pLeft||p->pRight); p=(p->pLeft ? p->pLeft : p->pRight)){
-    assert( p->pParent==0 || p==p->pParent->pRight || p==p->pParent->pLeft );
-  }
-  while( p ){
-    Fts3Expr *pParent = p->pParent;
-    fts3FreeExprNode(p);
-    if( pParent && p==pParent->pLeft && pParent->pRight ){
-      p = pParent->pRight;
-      while( p && (p->pLeft || p->pRight) ){
-        assert( p==p->pParent->pRight || p==p->pParent->pLeft );
-        p = (p->pLeft ? p->pLeft : p->pRight);
-      }
-    }else{
-      p = pParent;
-    }
-  }
-}
-
-/****************************************************************************
-*****************************************************************************
-** Everything after this point is just test code.
-*/
-
-#ifdef SQLITE_TEST
-
-#include <stdio.h>
-
-/*
-** Function to query the hash-table of tokenizers (see README.tokenizers).
-*/
-static int queryTestTokenizer(
-  sqlite3 *db, 
-  const char *zName,  
-  const sqlite3_tokenizer_module **pp
-){
-  int rc;
-  sqlite3_stmt *pStmt;
-  const char zSql[] = "SELECT fts3_tokenizer(?)";
-
-  *pp = 0;
-  rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0);
-  if( rc!=SQLITE_OK ){
-    return rc;
-  }
-
-  sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC);
-  if( SQLITE_ROW==sqlite3_step(pStmt) ){
-    if( sqlite3_column_type(pStmt, 0)==SQLITE_BLOB ){
-      memcpy((void *)pp, sqlite3_column_blob(pStmt, 0), sizeof(*pp));
-    }
-  }
-
-  return sqlite3_finalize(pStmt);
-}
-
-/*
-** Return a pointer to a buffer containing a text representation of the
-** expression passed as the first argument. The buffer is obtained from
-** sqlite3_malloc(). It is the responsibility of the caller to use 
-** sqlite3_free() to release the memory. If an OOM condition is encountered,
-** NULL is returned.
-**
-** If the second argument is not NULL, then its contents are prepended to 
-** the returned expression text and then freed using sqlite3_free().
-*/
-static char *exprToString(Fts3Expr *pExpr, char *zBuf){
-  if( pExpr==0 ){
-    return sqlite3_mprintf("");
-  }
-  switch( pExpr->eType ){
-    case FTSQUERY_PHRASE: {
-      Fts3Phrase *pPhrase = pExpr->pPhrase;
-      int i;
-      zBuf = sqlite3_mprintf(
-          "%zPHRASE %d 0", zBuf, pPhrase->iColumn);
-      for(i=0; zBuf && i<pPhrase->nToken; i++){
-        zBuf = sqlite3_mprintf("%z %.*s%s", zBuf, 
-            pPhrase->aToken[i].n, pPhrase->aToken[i].z,
-            (pPhrase->aToken[i].isPrefix?"+":"")
-        );
-      }
-      return zBuf;
-    }
-
-    case FTSQUERY_NEAR:
-      zBuf = sqlite3_mprintf("%zNEAR/%d ", zBuf, pExpr->nNear);
-      break;
-    case FTSQUERY_NOT:
-      zBuf = sqlite3_mprintf("%zNOT ", zBuf);
-      break;
-    case FTSQUERY_AND:
-      zBuf = sqlite3_mprintf("%zAND ", zBuf);
-      break;
-    case FTSQUERY_OR:
-      zBuf = sqlite3_mprintf("%zOR ", zBuf);
-      break;
-  }
-
-  if( zBuf ) zBuf = sqlite3_mprintf("%z{", zBuf);
-  if( zBuf ) zBuf = exprToString(pExpr->pLeft, zBuf);
-  if( zBuf ) zBuf = sqlite3_mprintf("%z} {", zBuf);
-
-  if( zBuf ) zBuf = exprToString(pExpr->pRight, zBuf);
-  if( zBuf ) zBuf = sqlite3_mprintf("%z}", zBuf);
-
-  return zBuf;
-}
-
-/*
-** This is the implementation of a scalar SQL function used to test the 
-** expression parser. It should be called as follows:
-**
-**   fts3_exprtest(<tokenizer>, <expr>, <column 1>, ...);
-**
-** The first argument, <tokenizer>, is the name of the fts3 tokenizer used
-** to parse the query expression (see README.tokenizers). The second argument
-** is the query expression to parse. Each subsequent argument is the name
-** of a column of the fts3 table that the query expression may refer to.
-** For example:
-**
-**   SELECT fts3_exprtest('simple', 'Bill col2:Bloggs', 'col1', 'col2');
-*/
-static void fts3ExprTest(
-  sqlite3_context *context,
-  int argc,
-  sqlite3_value **argv
-){
-  sqlite3_tokenizer_module const *pModule = 0;
-  sqlite3_tokenizer *pTokenizer = 0;
-  int rc;
-  char **azCol = 0;
-  const char *zExpr;
-  int nExpr;
-  int nCol;
-  int ii;
-  Fts3Expr *pExpr;
-  char *zBuf = 0;
-  sqlite3 *db = sqlite3_context_db_handle(context);
-
-  if( argc<3 ){
-    sqlite3_result_error(context, 
-        "Usage: fts3_exprtest(tokenizer, expr, col1, ...", -1
-    );
-    return;
-  }
-
-  rc = queryTestTokenizer(db,
-                          (const char *)sqlite3_value_text(argv[0]), &pModule);
-  if( rc==SQLITE_NOMEM ){
-    sqlite3_result_error_nomem(context);
-    goto exprtest_out;
-  }else if( !pModule ){
-    sqlite3_result_error(context, "No such tokenizer module", -1);
-    goto exprtest_out;
-  }
-
-  rc = pModule->xCreate(0, 0, &pTokenizer);
-  assert( rc==SQLITE_NOMEM || rc==SQLITE_OK );
-  if( rc==SQLITE_NOMEM ){
-    sqlite3_result_error_nomem(context);
-    goto exprtest_out;
-  }
-  pTokenizer->pModule = pModule;
-
-  zExpr = (const char *)sqlite3_value_text(argv[1]);
-  nExpr = sqlite3_value_bytes(argv[1]);
-  nCol = argc-2;
-  azCol = (char **)sqlite3_malloc(nCol*sizeof(char *));
-  if( !azCol ){
-    sqlite3_result_error_nomem(context);
-    goto exprtest_out;
-  }
-  for(ii=0; ii<nCol; ii++){
-    azCol[ii] = (char *)sqlite3_value_text(argv[ii+2]);
-  }
-
-  if( sqlite3_user_data(context) ){
-    char *zDummy = 0;
-    rc = sqlite3Fts3ExprParse(
-        pTokenizer, 0, azCol, 0, nCol, nCol, zExpr, nExpr, &pExpr, &zDummy
-    );
-    assert( rc==SQLITE_OK || pExpr==0 );
-    sqlite3_free(zDummy);
-  }else{
-    rc = fts3ExprParseUnbalanced(
-        pTokenizer, 0, azCol, 0, nCol, nCol, zExpr, nExpr, &pExpr
-    );
-  }
-
-  if( rc!=SQLITE_OK && rc!=SQLITE_NOMEM ){
-    sqlite3Fts3ExprFree(pExpr);
-    sqlite3_result_error(context, "Error parsing expression", -1);
-  }else if( rc==SQLITE_NOMEM || !(zBuf = exprToString(pExpr, 0)) ){
-    sqlite3_result_error_nomem(context);
-  }else{
-    sqlite3_result_text(context, zBuf, -1, SQLITE_TRANSIENT);
-    sqlite3_free(zBuf);
-  }
-
-  sqlite3Fts3ExprFree(pExpr);
-
-exprtest_out:
-  if( pModule && pTokenizer ){
-    rc = pModule->xDestroy(pTokenizer);
-  }
-  sqlite3_free(azCol);
-}
-
-/*
-** Register the query expression parser test function fts3_exprtest() 
-** with database connection db. 
-*/
-int sqlite3Fts3ExprInitTestInterface(sqlite3* db){
-  int rc = sqlite3_create_function(
-      db, "fts3_exprtest", -1, SQLITE_UTF8, 0, fts3ExprTest, 0, 0
-  );
-  if( rc==SQLITE_OK ){
-    rc = sqlite3_create_function(db, "fts3_exprtest_rebalance", 
-        -1, SQLITE_UTF8, (void *)1, fts3ExprTest, 0, 0
-    );
-  }
-  return rc;
-}
-
-#endif
-#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS3) */