[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/test/exclusive2.test

Index: third_party/sqlite/sqlite-src-3080704/test/exclusive2.test
diff --git a/third_party/sqlite/sqlite-src-3080704/test/exclusive2.test b/third_party/sqlite/sqlite-src-3080704/test/exclusive2.test
deleted file mode 100644
index 712363e7620fd357e40dfd3c39fae86c574c138e..0000000000000000000000000000000000000000
--- a/third_party/sqlite/sqlite-src-3080704/test/exclusive2.test
+++ /dev/null
@@ -1,324 +0,0 @@
-# 2007 March 24
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-# This file implements regression tests for SQLite library.
-#
-# $Id: exclusive2.test,v 1.10 2008/11/27 02:22:11 drh Exp $
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-# Do not use a codec for tests in this file, as the database file is
-# manipulated directly using tcl scripts (using the [hexio_write] command).
-#
-do_not_use_codec
-
-ifcapable {!pager_pragmas} {
-  finish_test
-  return
-}
-
-# Tests in this file verify that locking_mode=exclusive causes SQLite to
-# use cached pages even if the database is changed on disk. This doesn't
-# work with mmap.
-if {[permutation]=="mmap"} {
-  finish_test
-  return
-}
-
-# This module does not work right if the cache spills at unexpected
-# moments.  So disable the soft-heap-limit.
-#
-sqlite3_soft_heap_limit 0
-
-proc pagerChangeCounter {filename new {fd ""}} {
-  if {$fd==""} {
-    set fd [open $filename RDWR]
-    fconfigure $fd -translation binary -encoding binary
-    set needClose 1
-  } else {
-    set needClose 0
-  }
-  if {$new ne ""} {
-    seek $fd 24
-    set a [expr {($new&0xFF000000)>>24}]
-    set b [expr {($new&0x00FF0000)>>16}]
-    set c [expr {($new&0x0000FF00)>>8}]
-    set d [expr {($new&0x000000FF)}]
-    puts -nonewline $fd [binary format cccc $a $b $c $d]
-    flush $fd
-  }
-
-  seek $fd 24
-  foreach {a b c d} [list 0 0 0 0] {}
-  binary scan [read $fd 4] cccc a b c d
-  set  ret [expr ($a&0x000000FF)<<24]
-  incr ret [expr ($b&0x000000FF)<<16]
-  incr ret [expr ($c&0x000000FF)<<8]
-  incr ret [expr ($d&0x000000FF)<<0]
-
-  if {$needClose} {close $fd}
-  return $ret
-}
-
-proc readPagerChangeCounter {filename} {
-  set fd [open $filename RDONLY]
-  fconfigure $fd -translation binary -encoding binary
-
-  seek $fd 24
-  foreach {a b c d} [list 0 0 0 0] {}
-  binary scan [read $fd 4] cccc a b c d
-  set  ret [expr ($a&0x000000FF)<<24]
-  incr ret [expr ($b&0x000000FF)<<16]
-  incr ret [expr ($c&0x000000FF)<<8]
-  incr ret [expr ($d&0x000000FF)<<0]
-
-  close $fd
-  return $ret
-}
-
-
-proc t1sig {{db db}} {
-  execsql {SELECT count(*), md5sum(a) FROM t1} $db
-}
-do_test exclusive2-1.0 {
-  readPagerChangeCounter test.db
-} {0}
-
-#-----------------------------------------------------------------------
-# The following tests - exclusive2-1.X - check that:
-#
-# 1-3:   Build a database with connection 1, calculate a signature.
-# 4-7:   Modify the database using a second connection in a way that
-#        does not modify the freelist, then reset the pager change-counter
-#        to the value it had before the modifications.
-# 8:     Check that using the first connection, the database signature
-#        is still the same. This is because it uses the in-memory cache.
-#        It can't tell the db has changed because we reset the change-counter.
-# 9:     Increment the change-counter.
-# 10:    Ensure that the first connection now sees the updated database. It
-#        sees the change-counter has been incremented and discards the 
-#        invalid in-memory cache.
-#
-# This will only work if the database cache is large enough to hold 
-# the entire database. In the case of 1024 byte pages, this means
-# the cache size must be at least 17. Otherwise, some pages will be
-# loaded from the database file in step 8.
-#
-# For similar reasons, this test does not work with the memsubsys1 permutation.
-# Permutation memsubsys1 configures the pcache subsystem to use a static
-# allocation of 24 pages (shared between all pagers). This is not enough for
-# this test.
-#
-do_test exclusive2-1.1 {
-  execsql {
-    BEGIN;
-    CREATE TABLE t1(a, b);
-    INSERT INTO t1(a) VALUES(randstr(10, 400));
-    INSERT INTO t1(a) VALUES(randstr(10, 400));
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    COMMIT;
-    SELECT count(*) FROM t1;
-  }
-} {64}
-do_test exclusive2-1.2.1 {
-  # Make sure the pager cache is large enough to store the 
-  # entire database.
-  set nPage [expr [file size test.db]/1024]
-  if {$::SQLITE_DEFAULT_CACHE_SIZE < $nPage} {
-    execsql "PRAGMA cache_size = $nPage"
-  }
-  expr {[execsql {PRAGMA cache_size}] >= $nPage}
-} {1}
-do_test exclusive2-1.2 {
-  set ::sig [t1sig]
-  readPagerChangeCounter test.db
-} {1}
-do_test exclusive2-1.3 {
-  t1sig
-} $::sig
-do_test exclusive2-1.4 {
-  sqlite3 db2 test.db
-  t1sig db2
-} $::sig
-do_test exclusive2-1.5 {
-  execsql {
-    UPDATE t1 SET b=a, a=NULL;
-  } db2
-  expr {[t1sig db2] eq $::sig}
-} 0
-do_test exclusive2-1.6 {
-  readPagerChangeCounter test.db
-} {2}
-do_test exclusive2-1.7 {
-  pagerChangeCounter test.db 1
-} {1}
-if {[permutation] != "memsubsys1"} {
-  do_test exclusive2-1.9 {
-    t1sig
-    expr {[t1sig] eq $::sig}
-  } {1}
-}
-do_test exclusive2-1.10 {
-  pagerChangeCounter test.db 2
-} {2}
-do_test exclusive2-1.11 {
-  expr {[t1sig] eq $::sig}
-} {0}
-db2 close
-
-#--------------------------------------------------------------------
-# These tests - exclusive2-2.X - are similar to exclusive2-1.X, 
-# except that they are run with locking_mode=EXCLUSIVE.
-#
-# 1-3:   Build a database with exclusive-access connection 1, 
-#        calculate a signature.
-# 4:     Corrupt the database by writing 10000 bytes of garbage
-#        starting at the beginning of page 2. Check that connection 1
-#        still works. It should be accessing the in-memory cache.
-# 5-6:   Modify the dataase change-counter. Connection 1 still works
-#        entirely from in-memory cache, because it doesn't check the
-#        change-counter.
-# 7-8    Set the locking-mode back to normal. After the db is unlocked,
-#        SQLite detects the modified change-counter and discards the
-#        in-memory cache. Then it finds the corruption caused in step 4....
-#
-# As above, this test is only applicable if the pager cache is
-# large enough to hold the entire database. With 1024 byte pages,
-# this means 19 pages.  We also need to disable the soft-heap-limit
-# to prevent memory-induced cache spills.
-#
-do_test exclusive2-2.1 {
-  execsql {PRAGMA cache_size=1000;}
-  execsql {PRAGMA locking_mode = exclusive;}
-  execsql {
-    BEGIN;
-    DELETE FROM t1;
-    INSERT INTO t1(a) VALUES(randstr(10, 400));
-    INSERT INTO t1(a) VALUES(randstr(10, 400));
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    INSERT INTO t1(a) SELECT randstr(10, 400) FROM t1;
-    COMMIT;
-    SELECT count(*) FROM t1;
-  }
-} {64}
-do_test exclusive2-2.2.1 {
-  # Make sure the pager cache is large enough to store the 
-  # entire database.
-  set nPage [expr [file size test.db]/1024]
-  if {$::SQLITE_DEFAULT_CACHE_SIZE < $nPage} {
-    execsql "PRAGMA cache_size = $nPage"
-  }
-  expr {[execsql {PRAGMA cache_size}] >= $nPage}
-} {1}
-do_test exclusive2-2.2 {
-  set ::sig [t1sig]
-  readPagerChangeCounter test.db
-} {3}
-do_test exclusive2-2.3 {
-  t1sig
-} $::sig
-
-do_test exclusive2-2.4 {
-  set ::fd [open test.db RDWR]
-  fconfigure $::fd -translation binary
-  seek $::fd 1024
-  puts -nonewline $::fd [string repeat [binary format c 0] 10000]
-  flush $::fd
-  t1sig
-} $::sig
-
-do_test exclusive2-2.5 {
-  pagerChangeCounter test.db 5 $::fd
-} {5}
-do_test exclusive2-2.6 {
-  t1sig
-} $::sig
-do_test exclusive2-2.7 {
-  execsql {PRAGMA locking_mode = normal}
-  t1sig
-} $::sig
-
-do_test exclusive2-2.8 {
-  set rc [catch {t1sig} msg]
-  list $rc $msg
-} {1 {database disk image is malformed}}
-
-#--------------------------------------------------------------------
-# These tests - exclusive2-3.X - verify that the pager change-counter
-# is only incremented by the first change when in exclusive access
-# mode. In normal mode, the change-counter is incremented once
-# per write-transaction.
-#
-
-db close
-catch {close $::fd}
-forcedelete test.db
-forcedelete test.db-journal
-
-do_test exclusive2-3.0 {
-  sqlite3 db test.db
-  execsql {
-    BEGIN;
-    CREATE TABLE t1(a UNIQUE);
-    INSERT INTO t1 VALUES(randstr(200, 200));
-    INSERT INTO t1 VALUES(randstr(200, 200));
-    COMMIT;
-  }
-  readPagerChangeCounter test.db
-} {1}
-do_test exclusive2-3.1 {
-  execsql {
-    INSERT INTO t1 VALUES(randstr(200, 200));
-  }
-  readPagerChangeCounter test.db
-} {2}
-do_test exclusive2-3.2 {
-  execsql {
-    INSERT INTO t1 VALUES(randstr(200, 200));
-  }
-  readPagerChangeCounter test.db
-} {3}
-do_test exclusive2-3.3 {
-  execsql {
-    PRAGMA locking_mode = exclusive;
-    INSERT INTO t1 VALUES(randstr(200, 200));
-  }
-  readPagerChangeCounter test.db
-} {4}
-do_test exclusive2-3.4 {
-  execsql {
-    INSERT INTO t1 VALUES(randstr(200, 200));
-  }
-  readPagerChangeCounter test.db
-} {4}
-do_test exclusive2-3.5 {
-  execsql {
-    PRAGMA locking_mode = normal;
-    INSERT INTO t1 VALUES(randstr(200, 200));
-  }
-  readPagerChangeCounter test.db
-} {4}
-do_test exclusive2-3.6 {
-  execsql {
-    INSERT INTO t1 VALUES(randstr(200, 200));
-  }
-  readPagerChangeCounter test.db
-} {5}
-sqlite3_soft_heap_limit $cmdlinearg(soft-heap-limit)
-
-finish_test