[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/test/lastinsert.test

Index: third_party/sqlite/sqlite-src-3080704/test/lastinsert.test
diff --git a/third_party/sqlite/sqlite-src-3080704/test/lastinsert.test b/third_party/sqlite/sqlite-src-3080704/test/lastinsert.test
deleted file mode 100644
index c5bc267d1a23ef5c96970851e32bff53920bad83..0000000000000000000000000000000000000000
--- a/third_party/sqlite/sqlite-src-3080704/test/lastinsert.test
+++ /dev/null
@@ -1,377 +0,0 @@
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# Tests to make sure that value returned by last_insert_rowid() (LIRID)
-# is updated properly, especially inside triggers
-#
-# Note 1: insert into table is now the only statement which changes LIRID
-# Note 2: upon entry into before or instead of triggers,
-#           LIRID is unchanged (rather than -1)
-# Note 3: LIRID is changed within the context of a trigger,
-#           but is restored once the trigger exits
-# Note 4: LIRID is not changed by an insert into a view (since everything
-#           is done within instead of trigger context)
-#
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-# ----------------------------------------------------------------------------
-# 1.x - basic tests (no triggers)
-
-# LIRID changed properly after an insert into a table
-do_test lastinsert-1.1 {
-    catchsql {
-        create table t1 (k integer primary key);
-        insert into t1 values (1);
-        insert into t1 values (NULL);
-        insert into t1 values (NULL);
-        select last_insert_rowid();
-    }
-} {0 3}
-
-# EVIDENCE-OF: R-47220-63683 The sqlite3_last_insert_rowid() function
-# does not work for WITHOUT ROWID tables.
-#
-do_test lastinsert-1.1w {
-    catchsql {
-        create table t1w (k integer primary key) WITHOUT ROWID;
-        insert into t1w values (123456);
-        select last_insert_rowid(); -- returns 3 from above.
-    }
-} {0 3}
-
-# LIRID unchanged after an update on a table
-do_test lastinsert-1.2 {
-    catchsql {
-        update t1 set k=4 where k=2;
-        select last_insert_rowid();
-    }
-} {0 3}
-
-# LIRID unchanged after a delete from a table
-do_test lastinsert-1.3 {
-    catchsql {
-        delete from t1 where k=4;
-        select last_insert_rowid();
-    }
-} {0 3}
-
-# LIRID unchanged after create table/view statements
-do_test lastinsert-1.4.1 {
-    catchsql {
-        create table t2 (k integer primary key, val1, val2, val3);
-        select last_insert_rowid();
-    }
-} {0 3}
-ifcapable view {
-do_test lastinsert-1.4.2 {
-    catchsql {
-        create view v as select * from t1;
-        select last_insert_rowid();
-    }
-} {0 3}
-} ;# ifcapable view
-
-# All remaining tests involve triggers.  Skip them if triggers are not
-# supported in this build.
-#
-ifcapable {!trigger} {
-  finish_test
-  return
-}
-
-# ----------------------------------------------------------------------------
-# 2.x - tests with after insert trigger
-
-# LIRID changed properly after an insert into table containing an after trigger
-do_test lastinsert-2.1 {
-    catchsql {
-        delete from t2;
-        create trigger r1 after insert on t1 for each row begin
-            insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
-            update t2 set k=k+10, val2=100+last_insert_rowid();
-            update t2 set val3=1000+last_insert_rowid();
-        end;
-        insert into t1 values (13);
-        select last_insert_rowid();
-    }
-} {0 13}
-
-# LIRID equals NEW.k upon entry into after insert trigger
-do_test lastinsert-2.2 {
-    catchsql {
-        select val1 from t2;
-    }
-} {0 13}
-
-# LIRID changed properly by insert within context of after insert trigger
-do_test lastinsert-2.3 {
-    catchsql {
-        select val2 from t2;
-    }
-} {0 126}
-
-# LIRID unchanged by update within context of after insert trigger
-do_test lastinsert-2.4 {
-    catchsql {
-        select val3 from t2;
-    }
-} {0 1026}
-
-# ----------------------------------------------------------------------------
-# 3.x - tests with after update trigger
-
-# LIRID not changed after an update onto a table containing an after trigger
-do_test lastinsert-3.1 {
-    catchsql {
-        delete from t2;
-        drop trigger r1;
-        create trigger r1 after update on t1 for each row begin
-            insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
-            update t2 set k=k+10, val2=100+last_insert_rowid();
-            update t2 set val3=1000+last_insert_rowid();
-        end;
-        update t1 set k=14 where k=3;
-        select last_insert_rowid();
-    }
-} {0 13}
-
-# LIRID unchanged upon entry into after update trigger
-do_test lastinsert-3.2 {
-    catchsql {
-        select val1 from t2;
-    }
-} {0 13}
-
-# LIRID changed properly by insert within context of after update trigger
-do_test lastinsert-3.3 {
-    catchsql {
-        select val2 from t2;
-    }
-} {0 128}
-
-# LIRID unchanged by update within context of after update trigger
-do_test lastinsert-3.4 {
-    catchsql {
-        select val3 from t2;
-    }
-} {0 1028}
-
-# ----------------------------------------------------------------------------
-# 4.x - tests with instead of insert trigger
-# These may not be run if either views or triggers were disabled at 
-# compile-time
-
-ifcapable {view && trigger} {
-# LIRID not changed after an insert into view containing an instead of trigger
-do_test lastinsert-4.1 {
-    catchsql {
-        delete from t2;
-        drop trigger r1;
-        create trigger r1 instead of insert on v for each row begin
-            insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
-            update t2 set k=k+10, val2=100+last_insert_rowid();
-            update t2 set val3=1000+last_insert_rowid();
-        end;
-        insert into v values (15);
-        select last_insert_rowid();
-    }
-} {0 13}
-
-# LIRID unchanged upon entry into instead of trigger
-do_test lastinsert-4.2 {
-    catchsql {
-        select val1 from t2;
-    }
-} {0 13}
-
-# LIRID changed properly by insert within context of instead of trigger
-do_test lastinsert-4.3 {
-    catchsql {
-        select val2 from t2;
-    }
-} {0 130}
-
-# LIRID unchanged by update within context of instead of trigger
-do_test lastinsert-4.4 {
-    catchsql {
-        select val3 from t2;
-    }
-} {0 1030}
-} ;# ifcapable (view && trigger)
-
-# ----------------------------------------------------------------------------
-# 5.x - tests with before delete trigger
-
-# LIRID not changed after a delete on a table containing a before trigger
-do_test lastinsert-5.1 {
-    catchsql {
-      drop trigger r1;  -- This was not created if views are disabled.
-    }
-    catchsql {
-        delete from t2;
-        create trigger r1 before delete on t1 for each row begin
-            insert into t2 values (77, last_insert_rowid(), NULL, NULL);
-            update t2 set k=k+10, val2=100+last_insert_rowid();
-            update t2 set val3=1000+last_insert_rowid();
-        end;
-        delete from t1 where k=1;
-        select last_insert_rowid();
-    }
-} {0 13}
-
-# LIRID unchanged upon entry into delete trigger
-do_test lastinsert-5.2 {
-    catchsql {
-        select val1 from t2;
-    }
-} {0 13}
-
-# LIRID changed properly by insert within context of delete trigger
-do_test lastinsert-5.3 {
-    catchsql {
-        select val2 from t2;
-    }
-} {0 177}
-
-# LIRID unchanged by update within context of delete trigger
-do_test lastinsert-5.4 {
-    catchsql {
-        select val3 from t2;
-    }
-} {0 1077}
-
-# ----------------------------------------------------------------------------
-# 6.x - tests with instead of update trigger
-# These tests may not run if either views or triggers are disabled.
-
-ifcapable {view && trigger} {
-# LIRID not changed after an update on a view containing an instead of trigger
-do_test lastinsert-6.1 {
-    catchsql {
-        delete from t2;
-        drop trigger r1;
-        create trigger r1 instead of update on v for each row begin
-            insert into t2 values (NEW.k*2, last_insert_rowid(), NULL, NULL);
-            update t2 set k=k+10, val2=100+last_insert_rowid();
-            update t2 set val3=1000+last_insert_rowid();
-        end;
-        update v set k=16 where k=14;
-        select last_insert_rowid();
-    }
-} {0 13}
-
-# LIRID unchanged upon entry into instead of trigger
-do_test lastinsert-6.2 {
-    catchsql {
-        select val1 from t2;
-    }
-} {0 13}
-
-# LIRID changed properly by insert within context of instead of trigger
-do_test lastinsert-6.3 {
-    catchsql {
-        select val2 from t2;
-    }
-} {0 132}
-
-# LIRID unchanged by update within context of instead of trigger
-do_test lastinsert-6.4 {
-    catchsql {
-        select val3 from t2;
-    }
-} {0 1032}
-} ;# ifcapable (view && trigger)
-
-# ----------------------------------------------------------------------------
-# 7.x - complex tests with temporary tables and nested instead of triggers
-# These do not run if views or triggers are disabled.
-
-ifcapable {trigger && view && tempdb} {
-do_test lastinsert-7.1 {
-    catchsql {
-        drop table t1; drop table t2; drop trigger r1;
-        create temp table t1 (k integer primary key);
-        create temp table t2 (k integer primary key);
-        create temp view v1 as select * from t1;
-        create temp view v2 as select * from t2;
-        create temp table rid (k integer primary key, rin, rout);
-        insert into rid values (1, NULL, NULL);
-        insert into rid values (2, NULL, NULL);
-        create temp trigger r1 instead of insert on v1 for each row begin
-            update rid set rin=last_insert_rowid() where k=1;
-            insert into t1 values (100+NEW.k);
-            insert into v2 values (100+last_insert_rowid());
-            update rid set rout=last_insert_rowid() where k=1;
-        end;
-        create temp trigger r2 instead of insert on v2 for each row begin
-            update rid set rin=last_insert_rowid() where k=2;
-            insert into t2 values (1000+NEW.k);
-            update rid set rout=last_insert_rowid() where k=2;
-        end;
-        insert into t1 values (77);
-        select last_insert_rowid();
-    }
-} {0 77}
-
-do_test lastinsert-7.2 {
-    catchsql {
-        insert into v1 values (5);
-        select last_insert_rowid();
-    }
-} {0 77}
-
-do_test lastinsert-7.3 {
-    catchsql {
-        select rin from rid where k=1;
-    }
-} {0 77}
-
-do_test lastinsert-7.4 {
-    catchsql {
-        select rout from rid where k=1;
-    }
-} {0 105}
-
-do_test lastinsert-7.5 {
-    catchsql {
-        select rin from rid where k=2;
-    }
-} {0 105}
-
-do_test lastinsert-7.6 {
-    catchsql {
-        select rout from rid where k=2;
-    }
-} {0 1205}
-
-do_test lastinsert-8.1 {
-  db close
-  sqlite3 db test.db
-  execsql {
-    CREATE TABLE t2(x INTEGER PRIMARY KEY, y);
-    CREATE TABLE t3(a, b);
-    CREATE TRIGGER after_t2 AFTER INSERT ON t2 BEGIN
-      INSERT INTO t3 VALUES(new.x, new.y);
-    END;
-    INSERT INTO t2 VALUES(5000000000, 1);
-    SELECT last_insert_rowid();
-  }
-} 5000000000
-
-do_test lastinsert-9.1 {
-  db eval {INSERT INTO t2 VALUES(123456789012345,0)}
-  db last_insert_rowid
-} {123456789012345}
-
-
-} ;# ifcapable (view && trigger)
-
-finish_test