[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/test/indexfault.test

Index: third_party/sqlite/sqlite-src-3080704/test/indexfault.test
diff --git a/third_party/sqlite/sqlite-src-3080704/test/indexfault.test b/third_party/sqlite/sqlite-src-3080704/test/indexfault.test
deleted file mode 100644
index efe493219edc907f8ef895842db7abbb8d2dea5a..0000000000000000000000000000000000000000
--- a/third_party/sqlite/sqlite-src-3080704/test/indexfault.test
+++ /dev/null
@@ -1,342 +0,0 @@
-# 2011 August 08
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-source $testdir/lock_common.tcl
-source $testdir/malloc_common.tcl
-
-ifcapable !mergesort {
-  finish_test
-  return
-}
-
-set testprefix indexfault
-
-# Set up the custom fault-injector. This is further configured by using
-# different values for $::custom_filter and different implementations
-# of Tcl proc [xCustom] for each test case.
-#
-proc install_custom_faultsim {} {
-  set ::FAULTSIM(custom)            [list      \
-    -injectinstall   custom_injectinstall    \
-    -injectstart     custom_injectstart      \
-    -injectstop      custom_injectstop       \
-    -injecterrlist   {{1 {disk I/O error}}}  \
-    -injectuninstall custom_injectuninstall  \
-  ]
-  proc custom_injectinstall {} {
-    testvfs shmfault -default true
-    shmfault filter $::custom_filter
-    shmfault script xCustom
-  }
-  proc custom_injectuninstall {} {
-    catch {db  close}
-    catch {db2 close}
-    shmfault delete
-  }
-  set ::custom_ifail -1
-  set ::custom_nfail -1
-  proc custom_injectstart {iFail} {
-    set ::custom_ifail $iFail
-    set ::custom_nfail 0
-  }
-  proc custom_injectstop {} {
-    set ::custom_ifail -1
-    return $::custom_nfail
-  }
-}
-proc uninstall_custom_faultsim {} {
-  unset -nocomplain ::FAULTSIM(custom)
-}
-
-
-#-------------------------------------------------------------------------
-# These tests - indexfault-1.* - Build an index on a smallish table with
-# all different kinds of fault-injection. The CREATE INDEX is run once
-# with default options and once with a 50KB soft-heap-limit.
-#
-do_execsql_test 1.0 {
-  BEGIN;
-    CREATE TABLE t1(x);
-    INSERT INTO t1 VALUES(randomblob(202));
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --     2
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --     4
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --     8
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --    16
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --    32
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --    64
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --   128
-    INSERT INTO t1 SELECT randomblob(202) FROM t1;     --   256
-  COMMIT;
-}
-faultsim_save_and_close
-
-do_faultsim_test 1.1 -prep {
-  faultsim_restore_and_reopen
-} -body {
-  execsql { CREATE INDEX i1 ON t1(x) }
-  faultsim_test_result {0 {}} 
-  faultsim_integrity_check
-}
-ifcapable memorymanage {
-  set soft_limit [sqlite3_soft_heap_limit 50000]
-  do_faultsim_test 2.1 -prep {
-    faultsim_restore_and_reopen
-  } -body {
-    execsql { CREATE INDEX i1 ON t1(x) }
-    faultsim_test_result {0 {}} 
-  }
-  sqlite3_soft_heap_limit $soft_limit
-}
-
-#-------------------------------------------------------------------------
-# These are similar to the indexfault-1.* tests, except they create an
-# index with more than one column.
-#
-sqlite3 db test.db
-do_execsql_test 2.0 {
-  BEGIN;
-    DROP TABLE IF EXISTS t1;
-    CREATE TABLE t1(t,u,v,w,x,y,z);
-    INSERT INTO t1 VALUES(
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30)
-    );
-    INSERT INTO t1 SELECT 
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30) FROM t1;         -- 2
-    INSERT INTO t1 SELECT 
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30) FROM t1;         -- 4
-    INSERT INTO t1 SELECT 
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30) FROM t1;         -- 8
-    INSERT INTO t1 SELECT 
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30) FROM t1;         -- 16
-    INSERT INTO t1 SELECT 
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30) FROM t1;         -- 32
-    INSERT INTO t1 SELECT 
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30) FROM t1;         -- 64
-    INSERT INTO t1 SELECT 
-      randomblob(30), randomblob(30), randomblob(30), randomblob(30),
-      randomblob(30), randomblob(30), randomblob(30) FROM t1;         -- 128
-  COMMIT;
-}
-faultsim_save_and_close
-
-do_faultsim_test 2.1 -prep {
-  faultsim_restore_and_reopen
-} -body {
-  execsql { CREATE INDEX i1 ON t1(t,u,v,w,x,y,z) }
-  faultsim_test_result {0 {}} 
-  faultsim_integrity_check
-}
-ifcapable memorymanage {
-  set soft_limit [sqlite3_soft_heap_limit 50000]
-  do_faultsim_test 2.2 -prep {
-    faultsim_restore_and_reopen
-  } -body {
-    execsql { CREATE INDEX i1 ON t1(t,u,v,w,x,y,z) }
-    faultsim_test_result {0 {}} 
-  }
-  sqlite3_soft_heap_limit $soft_limit
-}
-
-#-------------------------------------------------------------------------
-# The following tests - indexfault-2.* - all attempt to build a index
-# on table t1 in the main database with injected IO errors. Individual
-# test cases work as follows:
-#
-#   3.1: IO errors injected into xOpen() calls.
-#   3.2: As 7.1, but with a low (50KB) soft-heap-limit.
-#
-#   3.3: IO errors injected into the first 200 write() calls made on the
-#        second temporary file.
-#   3.4: As 7.3, but with a low (50KB) soft-heap-limit.
-#
-#   3.5: After a certain amount of data has been read from the main database
-#        file (and written into the temporary b-tree), sqlite3_release_memory()
-#        is called to free as much memory as possible. This causes the temp
-#        b-tree to be flushed to disk. So that before its contents can be 
-#        transfered to a PMA they must be read back from disk - creating extra
-#        opportunities for IO errors.
-#
-install_custom_faultsim
-
-# Set up a table to build indexes on. Save the setup using the 
-# [faultsim_save_and_close] mechanism.
-# 
-sqlite3 db test.db
-do_execsql_test 3.0 {
-  BEGIN;
-    DROP TABLE IF EXISTS t1;
-    CREATE TABLE t1(x);
-    INSERT INTO t1 VALUES(randomblob(11000));
-    INSERT INTO t1 SELECT randomblob(11001) FROM t1;     --     2
-    INSERT INTO t1 SELECT randomblob(11002) FROM t1;     --     4
-    INSERT INTO t1 SELECT randomblob(11003) FROM t1;     --     8
-    INSERT INTO t1 SELECT randomblob(11004) FROM t1;     --    16
-    INSERT INTO t1 SELECT randomblob(11005) FROM t1;     --    32
-    INSERT INTO t1 SELECT randomblob(11006) FROM t1;     --    64
-    INSERT INTO t1 SELECT randomblob(11007) FROM t1;     --   128
-    INSERT INTO t1 SELECT randomblob(11008) FROM t1;     --   256
-    INSERT INTO t1 SELECT randomblob(11009) FROM t1;     --   512
-  COMMIT;
-}
-faultsim_save_and_close
-
-set ::custom_filter xOpen
-proc xCustom {args} {
-  incr ::custom_ifail -1
-  if {$::custom_ifail==0} {
-    incr ::custom_nfail
-    return "SQLITE_IOERR"
-  }
-  return "SQLITE_OK"
-}
-do_faultsim_test 3.1 -faults custom -prep {
-  faultsim_restore_and_reopen
-} -body {
-  execsql { CREATE INDEX i1 ON t1(x) }
-  faultsim_test_result {0 {}} 
-}
-ifcapable memorymanage {
-  set soft_limit [sqlite3_soft_heap_limit 50000]
-  do_faultsim_test 3.2 -faults custom -prep {
-    faultsim_restore_and_reopen
-  } -body {
-    execsql { CREATE INDEX i1 ON t1(x) }
-    faultsim_test_result {0 {}} 
-  }
-  sqlite3_soft_heap_limit $soft_limit
-}
-
-set ::custom_filter {xOpen xWrite}
-proc xCustom {method args} {
-  if {$method == "xOpen"} {
-    if {[lindex $args 0] == ""} {
-      incr ::nTmpOpen 1
-      if {$::nTmpOpen == 3} { return "failme" }
-    }
-    return "SQLITE_OK"
-  }
-  if {$::custom_ifail<200 && [lindex $args 1] == "failme"} {
-    incr ::custom_ifail -1
-    if {$::custom_ifail==0} {
-      incr ::custom_nfail
-      return "SQLITE_IOERR"
-    }
-  }
-  return "SQLITE_OK"
-}
-
-do_faultsim_test 3.3 -faults custom -prep {
-  faultsim_restore_and_reopen
-  set ::nTmpOpen 0
-} -body {
-  execsql { CREATE INDEX i1 ON t1(x) }
-  faultsim_test_result {0 {}} 
-}
-
-ifcapable memorymanage {
-  set soft_limit [sqlite3_soft_heap_limit 50000]
-  do_faultsim_test 3.4 -faults custom -prep {
-    faultsim_restore_and_reopen
-    set ::nTmpOpen 0
-  } -body {
-    execsql { CREATE INDEX i1 ON t1(x) }
-    faultsim_test_result {0 {}} 
-  }
-  sqlite3_soft_heap_limit $soft_limit
-}
-
-uninstall_custom_faultsim
-
-#-------------------------------------------------------------------------
-# Test 4: After a certain amount of data has been read from the main database
-# file (and written into the temporary b-tree), sqlite3_release_memory() is
-# called to free as much memory as possible. This causes the temp b-tree to be
-# flushed to disk. So that before its contents can be transfered to a PMA they
-# must be read back from disk - creating extra opportunities for IO errors.
-# 
-install_custom_faultsim
-
-catch { db close }
-forcedelete test.db
-sqlite3 db test.db
-
-do_execsql_test 4.0 {
-  BEGIN;
-    DROP TABLE IF EXISTS t1;
-    CREATE TABLE t1(x);
-    INSERT INTO t1 VALUES(randomblob(11000));
-    INSERT INTO t1 SELECT randomblob(11001) FROM t1;     --     2
-    INSERT INTO t1 SELECT randomblob(11002) FROM t1;     --     4
-    INSERT INTO t1 SELECT randomblob(11003) FROM t1;     --     8
-    INSERT INTO t1 SELECT randomblob(11004) FROM t1;     --    16
-    INSERT INTO t1 SELECT randomblob(11005) FROM t1;     --    32
-    INSERT INTO t1 SELECT randomblob(11005) FROM t1;     --    64
-  COMMIT;
-}
-faultsim_save_and_close
-
-testvfs tvfs 
-tvfs script xRead
-tvfs filter xRead
-set ::nRead 0
-proc xRead {method file args} {
-  if {[file tail $file] == "test.db"} { incr ::nRead }
-}
-
-do_test 4.1 {
-  sqlite3 db test.db -vfs tvfs
-  execsql { CREATE INDEX i1 ON t1(x) }
-} {}
-
-db close
-tvfs delete
-
-set ::custom_filter xRead
-proc xCustom {method file args} {
-  incr ::nReadCall
-  if {$::nReadCall >= ($::nRead/5)} {
-    if {$::nReadCall == ($::nRead/5)} {
-      set nByte [sqlite3_release_memory [expr 64*1024*1024]]
-      sqlite3_soft_heap_limit 20000
-    }
-    if {$file == ""} {
-      incr ::custom_ifail -1
-      if {$::custom_ifail==0} {
-        incr ::custom_nfail
-        return "SQLITE_IOERR"
-      }
-    }
-  }
-  return "SQLITE_OK"
-}
-
-do_faultsim_test 4.2 -faults custom -prep {
-  faultsim_restore_and_reopen
-  set ::nReadCall 0
-  sqlite3_soft_heap_limit 0
-} -body {
-  execsql { CREATE INDEX i1 ON t1(x) }
-  faultsim_test_result {0 {}} 
-}
-
-uninstall_custom_faultsim
-
-finish_test