[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/test/multiplex3.test

Index: third_party/sqlite/sqlite-src-3080704/test/multiplex3.test
diff --git a/third_party/sqlite/sqlite-src-3080704/test/multiplex3.test b/third_party/sqlite/sqlite-src-3080704/test/multiplex3.test
deleted file mode 100644
index c1e741acdb33d6fd864241aecd2029fedb3170bc..0000000000000000000000000000000000000000
--- a/third_party/sqlite/sqlite-src-3080704/test/multiplex3.test
+++ /dev/null
@@ -1,166 +0,0 @@
-
-# 2011 December 13
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-#
-# This file contains tests for error (IO, OOM etc.) handling when using
-# the multiplexor extension with 8.3 filenames.
-#
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-source $testdir/malloc_common.tcl
-set ::testprefix multiplex3
-
-ifcapable !8_3_names {
-  puts -nonewline "SQLite compiled without SQLITE_ENABLE_8_3_NAMES. "
-  puts            "Skipping tests multiplex3-*."
-  finish_test
-  return
-}
-
-db close
-sqlite3_shutdown
-sqlite3_config_uri 1
-autoinstall_test_functions
-
-sqlite3_multiplex_initialize "" 1
-
-proc destroy_vfs_stack {} {
-  generic_unregister stack
-  sqlite3_multiplex_shutdown
-}
-
-proc multiplex_delete_db {} {
-  forcedelete test.db
-  for {set i 1} {$i <= 1000} {incr i} {
-    forcedelete test.[format %03d $i]
-  }
-}
-
-# Procs to save and restore the current muliplexed database.
-#
-proc multiplex_save_db {} {
-  foreach f [glob -nocomplain sv_test.*] { forcedelete $f }
-  foreach f [glob -nocomplain test.*]    { forcecopy $f "sv_$f" }
-}
-proc multiplex_restore_db {} {
-  foreach f [glob -nocomplain test.*]    {forcedelete $f}
-  foreach f [glob -nocomplain sv_test.*] {forcecopy $f [string range $f 3 end]} }
-
-proc setup_and_save_db {} {
-  multiplex_delete_db
-  sqlite3 db file:test.db?8_3_names=1
-  sqlite3_multiplex_control db main chunk_size [expr 256*1024]
-  execsql {
-    CREATE TABLE t1(a PRIMARY KEY, b);
-    INSERT INTO t1 VALUES(randomblob(15), randomblob(2000));
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    --   2
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    --   4
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    --   8
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    --  16
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    --  32
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    --  64
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    -- 128
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    -- 256
-    INSERT INTO t1 SELECT randomblob(15), randomblob(2000) FROM t1;    -- 512
-  }
-  set ::cksum1 [execsql {SELECT md5sum(a, b) FROM t1 ORDER BY a}]
-  db close
-  multiplex_save_db
-}
-
-do_test 1.0 { setup_and_save_db } {}
-do_faultsim_test 1 -prep {
-  multiplex_restore_db
-  sqlite3 db file:test.db?8_3_names=1
-  sqlite3_multiplex_control db main chunk_size [expr 256*1024]
-} -body {
-  execsql {
-    UPDATE t1 SET a=randomblob(12), b=randomblob(1500) WHERE (rowid%32)=0
-  }
-} -test {
-  faultsim_test_result {0 {}}
-  if {$testrc!=0} {
-    set cksum2 [execsql {SELECT md5sum(a, b) FROM t1 ORDER BY a}]
-    if {$cksum2 != $::cksum1} { error "data mismatch" }
-  }
-}
-
-#-------------------------------------------------------------------------
-# The following tests verify that hot-journal rollback works. As follows:
-#
-#   1. Create a large database.
-#   2. Set the pager cache to be very small.
-#   3. Open a transaction. 
-#   4. Run the following 100 times:
-#      a. Update a row.
-#      b. Copy all files on disk to a new db location, including the journal.
-#      c. Verify that the new db can be opened and that the content matches
-#         the database created in step 1 (proving the journal was rolled
-#         back).
-
-do_test 2.0 { 
-  setup_and_save_db
-  multiplex_restore_db
-  sqlite3 db file:test.db?8_3_names=1
-  execsql { PRAGMA cache_size = 10 }
-  execsql { BEGIN }
-} {}
-
-for {set iTest 1} {$iTest<=100} {incr iTest} {
-  do_test 2.$iTest {
-    execsql { 
-      UPDATE t1 SET a=randomblob(12), b=randomblob(1400) WHERE rowid=5*$iTest
-    }
-    foreach f [glob -nocomplain test.*] {forcecopy $f "xx_$f"}
-    sqlite3 db2 file:xx_test.db?8_3_names=1
-    execsql {SELECT md5sum(a, b) FROM t1 ORDER BY a} db2
-  } $::cksum1
-
-  db2 close
-}
-catch { db close }
-
-
-do_test 3.0 { setup_and_save_db } {}
-do_faultsim_test 3 -faults ioerr-trans* -prep {
-
-  forcedelete test2.db
-  set fd [open test2.wal w]
-  seek $fd 4095
-  puts -nonewline $fd x
-  close $fd
-
-  multiplex_restore_db
-  sqlite3 db file:test.db?8_3_names=1
-  sqlite3 db2 file:test2.db?8_3_names=1
-  sqlite3_multiplex_control db main chunk_size [expr 256*1024]
-  sqlite3_multiplex_control db2 main chunk_size [expr 256*1024]
-} -body {
-  sqlite3_backup B db2 main db main
-  B step 100000
-  set rc [B finish]
-  if { [string match SQLITE_IOERR_* $rc] } {error "disk I/O error"}
-  set rc
-} -test {
-  faultsim_test_result {0 SQLITE_OK}
-  if {$testrc==0} {
-    set cksum2 [execsql {SELECT md5sum(a, b) FROM t1 ORDER BY a} db2]
-    if {$cksum2 != $::cksum1} { error "data mismatch" }
-  }
-  catch { B finish }
-  catch { db close }
-  catch { db2 close }
-}
-
-catch { db close }
-sqlite3_multiplex_shutdown
-finish_test