[sqlite] Remove obsolete reference version 3.8.7.4.

third_party/sqlite/sqlite-src-3080704/test/attach2.test

-# 2003 July 1
-#
-# The author disclaims copyright to this source code.  In place of
-# a legal notice, here is a blessing:
-#
-#    May you do good and not evil.
-#    May you find forgiveness for yourself and forgive others.
-#    May you share freely, never taking more than you give.
-#
-#***********************************************************************
-# This file implements regression tests for SQLite library.  The
-# focus of this script is testing the ATTACH and DETACH commands
-# and related functionality.
-#
-# $Id: attach2.test,v 1.38 2007/12/13 21:54:11 drh Exp $
-#
-
-set testdir [file dirname $argv0]
-source $testdir/tester.tcl
-
-ifcapable !attach {
-  finish_test
-  return
-}
-
-# Ticket #354
-#
-# Databases test.db and test2.db contain identical schemas.  Make
-# sure we can attach test2.db from test.db.
-#
-do_test attach2-1.1 {
-  db eval {
-    CREATE TABLE t1(a,b);
-    CREATE INDEX x1 ON t1(a);
-  }
-  forcedelete test2.db
-  forcedelete test2.db-journal
-  sqlite3 db2 test2.db
-  db2 eval {
-    CREATE TABLE t1(a,b);
-    CREATE INDEX x1 ON t1(a);
-  }
-  catchsql {
-    ATTACH 'test2.db' AS t2;
-  }
-} {0 {}}
-
-# Ticket #514
-#
-proc db_list {db} {
-  set list {}
-  foreach {idx name file} [execsql {PRAGMA database_list} $db] {
-    lappend list $idx $name
-  }
-  return $list
-}
-db eval {DETACH t2}
-do_test attach2-2.1 {
-  # lock test2.db then try to attach it.  This is no longer an error because
-  # db2 just RESERVES the database.  It does not obtain a write-lock until
-  # we COMMIT.
-  db2 eval {BEGIN}
-  db2 eval {UPDATE t1 SET a = 0 WHERE 0}
-  catchsql {
-    ATTACH 'test2.db' AS t2;
-  }
-} {0 {}}
-ifcapable schema_pragmas {
-do_test attach2-2.2 {
-  # make sure test2.db did get attached.
-  db_list db
-} {0 main 2 t2}
-} ;# ifcapable schema_pragmas
-db2 eval {COMMIT}
-
-do_test attach2-2.5 {
-  # Make sure we can read test2.db from db
-  catchsql {
-    SELECT name FROM t2.sqlite_master;
-  }
-} {0 {t1 x1}}
-do_test attach2-2.6 {
-  # lock test2.db and try to read from it.  This should still work because
-  # the lock is only a RESERVED lock which does not prevent reading.
-  #
-  db2 eval BEGIN
-  db2 eval {UPDATE t1 SET a = 0 WHERE 0}
-  catchsql {
-    SELECT name FROM t2.sqlite_master;
-  }
-} {0 {t1 x1}}
-do_test attach2-2.7 {
-  # but we can still read from test1.db even though test2.db is locked.
-  catchsql {
-    SELECT name FROM main.sqlite_master;
-  }
-} {0 {t1 x1}}
-do_test attach2-2.8 {
-  # start a transaction on test.db even though test2.db is locked.
-  catchsql {
-    BEGIN;
-    INSERT INTO t1 VALUES(8,9);
-  }
-} {0 {}}
-do_test attach2-2.9 {
-  execsql {
-    SELECT * FROM t1
-  }
-} {8 9}
-do_test attach2-2.10 {
-  # now try to write to test2.db.  the write should fail
-  catchsql {
-    INSERT INTO t2.t1 VALUES(1,2);
-  }
-} {1 {database is locked}}
-do_test attach2-2.11 {
-  # when the write failed in the previous test, the transaction should
-  # have rolled back.
-  # 
-  # Update for version 3: A transaction is no longer rolled back if a
-  #                       database is found to be busy.
-  execsql {rollback}
-  db2 eval ROLLBACK
-  execsql {
-    SELECT * FROM t1
-  }
-} {}
-do_test attach2-2.12 {
-  catchsql {
-    COMMIT
-  }
-} {1 {cannot commit - no transaction is active}}
-
-# Ticket #574:  Make sure it works using the non-callback API
-#
-do_test attach2-3.1 {
-  set DB [sqlite3_connection_pointer db]
-  set rc [catch {sqlite3_prepare $DB "ATTACH 'test2.db' AS t2" -1 TAIL} VM]
-  if {$rc} {lappend rc $VM}
-  sqlite3_step $VM
-  sqlite3_finalize $VM
-  set rc
-} {0}
-do_test attach2-3.2 {
-  set rc [catch {sqlite3_prepare $DB "DETACH t2" -1 TAIL} VM]
-  if {$rc} {lappend rc $VM}
-  sqlite3_step $VM
-  sqlite3_finalize $VM
-  set rc
-} {0}
-
-db close
-for {set i 2} {$i<=15} {incr i} {
-  catch {db$i close}
-}
-
-# A procedure to verify the status of locks on a database.
-#
-proc lock_status {testnum db expected_result} {
-  # If the database was compiled with OMIT_TEMPDB set, then 
-  # the lock_status list will not contain an entry for the temp
-  # db. But the test code doesn't know this, so its easiest 
-  # to filter it out of the $expected_result list here.
-  ifcapable !tempdb {
-    set expected_result [concat \
-        [lrange $expected_result 0 1] \
-        [lrange $expected_result 4 end] \
-    ]
-  }
-  do_test attach2-$testnum [subst {
-    $db cache flush  ;# The lock_status pragma should not be cached
-    execsql {PRAGMA lock_status} $db
-  }] $expected_result
-}
-set sqlite_os_trace 0
-
-# Tests attach2-4.* test that read-locks work correctly with attached
-# databases.
-do_test attach2-4.1 {
-  sqlite3 db test.db
-  sqlite3 db2 test.db
-  execsql {ATTACH 'test2.db' as file2}
-  execsql {ATTACH 'test2.db' as file2} db2
-} {}
-
-lock_status 4.1.1 db {main unlocked temp closed file2 unlocked}
-lock_status 4.1.2 db2 {main unlocked temp closed file2 unlocked}
-
-do_test attach2-4.2 {
-  # Handle 'db' read-locks test.db
-  execsql {BEGIN}
-  execsql {SELECT * FROM t1}
-  # Lock status:
-  #    db  - shared(main)
-  #    db2 -
-} {}
-
-lock_status 4.2.1 db {main shared temp closed file2 unlocked}
-lock_status 4.2.2 db2 {main unlocked temp closed file2 unlocked}
-
-do_test attach2-4.3 {
-  # The read lock held by db does not prevent db2 from reading test.db
-  execsql {SELECT * FROM t1} db2
-} {}
-
-lock_status 4.3.1 db {main shared temp closed file2 unlocked}
-lock_status 4.3.2 db2 {main unlocked temp closed file2 unlocked}
-
-do_test attach2-4.4 {
-  # db is holding a read lock on test.db, so we should not be able
-  # to commit a write to test.db from db2
-  catchsql {
-    INSERT INTO t1 VALUES(1, 2)
-  } db2 
-} {1 {database is locked}}
-
-lock_status 4.4.1 db {main shared temp closed file2 unlocked}
-lock_status 4.4.2 db2 {main unlocked temp closed file2 unlocked}
-
-# We have to make sure that the cache_size and the soft_heap_limit
-# are large enough to hold the entire change in memory.  If either
-# is set too small, then changes will spill to the database, forcing
-# a reserved lock to promote to exclusive.  That will mess up our
-# test results. 
-
-set soft_limit [sqlite3_soft_heap_limit 0]
-
-
-do_test attach2-4.5 {
-  # Handle 'db2' reserves file2.
-  execsql {BEGIN} db2
-  execsql {INSERT INTO file2.t1 VALUES(1, 2)} db2
-  # Lock status:
-  #    db  - shared(main)
-  #    db2 - reserved(file2)
-} {}
-
-lock_status 4.5.1 db {main shared temp closed file2 unlocked}
-lock_status 4.5.2 db2 {main unlocked temp closed file2 reserved}
-
-do_test attach2-4.6.1 {
-  # Reads are allowed against a reserved database.
-  catchsql {
-    SELECT * FROM file2.t1;
-  }
-  # Lock status:
-  #    db  - shared(main), shared(file2)
-  #    db2 - reserved(file2)
-} {0 {}}
-
-lock_status 4.6.1.1 db {main shared temp closed file2 shared}
-lock_status 4.6.1.2 db2 {main unlocked temp closed file2 reserved}
-
-do_test attach2-4.6.2 {
-  # Writes against a reserved database are not allowed.
-  catchsql {
-    UPDATE file2.t1 SET a=0;
-  }
-} {1 {database is locked}}
-
-lock_status 4.6.2.1 db {main shared temp closed file2 shared}
-lock_status 4.6.2.2 db2 {main unlocked temp closed file2 reserved}
-
-do_test attach2-4.7 {
-  # Ensure handle 'db' retains the lock on the main file after
-  # failing to obtain a write-lock on file2.
-  catchsql {
-    INSERT INTO t1 VALUES(1, 2)
-  } db2 
-} {0 {}}
-
-lock_status 4.7.1 db {main shared temp closed file2 shared}
-lock_status 4.7.2 db2 {main reserved temp closed file2 reserved}
-
-do_test attach2-4.8 {
-  # We should still be able to read test.db from db2
-  execsql {SELECT * FROM t1} db2
-} {1 2}
-
-lock_status 4.8.1 db {main shared temp closed file2 shared}
-lock_status 4.8.2 db2 {main reserved temp closed file2 reserved}
-
-do_test attach2-4.9 {
-  # Try to upgrade the handle 'db' lock.
-  catchsql {
-    INSERT INTO t1 VALUES(1, 2)
-  }
-} {1 {database is locked}}
-
-lock_status 4.9.1 db {main shared temp closed file2 shared}
-lock_status 4.9.2 db2 {main reserved temp closed file2 reserved}
-
-do_test attach2-4.10 {
-  # We cannot commit db2 while db is holding a read-lock
-  catchsql {COMMIT} db2
-} {1 {database is locked}}
-
-lock_status 4.10.1 db {main shared temp closed file2 shared}
-lock_status 4.10.2 db2 {main pending temp closed file2 reserved}
-
-set sqlite_os_trace 0
-do_test attach2-4.11 {
-  # db is able to commit.
-  catchsql {COMMIT}
-} {0 {}}
-
-lock_status 4.11.1 db {main unlocked temp closed file2 unlocked}
-lock_status 4.11.2 db2 {main pending temp closed file2 reserved}
-
-do_test attach2-4.12 {
-  # Now we can commit db2
-  catchsql {COMMIT} db2
-} {0 {}}
-
-lock_status 4.12.1 db {main unlocked temp closed file2 unlocked}
-lock_status 4.12.2 db2 {main unlocked temp closed file2 unlocked}
-
-do_test attach2-4.13 {
-  execsql {SELECT * FROM file2.t1}
-} {1 2}
-do_test attach2-4.14 {
-  execsql {INSERT INTO t1 VALUES(1, 2)}
-} {}
-do_test attach2-4.15 {
-  execsql {SELECT * FROM t1} db2
-} {1 2 1 2}
-
-db close
-db2 close
-forcedelete test2.db
-sqlite3_soft_heap_limit $soft_limit
-
-# These tests - attach2-5.* - check that the master journal file is deleted
-# correctly when a multi-file transaction is committed or rolled back.
-#
-# Update: It's not actually created if a rollback occurs, so that test
-# doesn't really prove too much.
-foreach f [glob test.db*] {forcedelete $f}
-do_test attach2-5.1 {
-  sqlite3 db test.db
-  execsql {
-    ATTACH 'test.db2' AS aux;
-  }
-} {}
-do_test attach2-5.2 {
-  execsql {
-    BEGIN;
-    CREATE TABLE tbl(a, b, c);
-    CREATE TABLE aux.tbl(a, b, c);
-    COMMIT;
-  }
-} {}
-do_test attach2-5.3 {
-  lsort [glob test.db*]
-} {test.db test.db2}
-do_test attach2-5.4 {
-  execsql {
-    BEGIN;
-    DROP TABLE aux.tbl;
-    DROP TABLE tbl;
-    ROLLBACK;
-  }
-} {}
-do_test attach2-5.5 {
-  lsort [glob test.db*]
-} {test.db test.db2}
-
-# Check that a database cannot be ATTACHed or DETACHed during a transaction.
-do_test attach2-6.1 {
-  execsql {
-    BEGIN;
-  }
-} {}
-do_test attach2-6.2 {
-  catchsql {
-    ATTACH 'test3.db' as aux2;
-  }
-} {1 {cannot ATTACH database within transaction}}
-
-# EVIDENCE-OF: R-59740-55581 This statement will fail if SQLite is in
-# the middle of a transaction.
-#
-do_test attach2-6.3 {
-  catchsql {
-    DETACH aux;
-  }
-} {1 {cannot DETACH database within transaction}}
-do_test attach2-6.4 {
-  execsql {
-    COMMIT;
-    DETACH aux;
-  }
-} {}
-
-db close
-
-finish_test