| OLD | NEW |
|---|
| (Empty) |
| 1 /* | |
| 2 ** 2008 Jan 22 | |
| 3 ** | |
| 4 ** The author disclaims copyright to this source code. In place of | |
| 5 ** a legal notice, here is a blessing: | |
| 6 ** | |
| 7 ** May you do good and not evil. | |
| 8 ** May you find forgiveness for yourself and forgive others. | |
| 9 ** May you share freely, never taking more than you give. | |
| 10 ** | |
| 11 ****************************************************************************** | |
| 12 ** | |
| 13 ** This file contains code for a VFS layer that acts as a wrapper around | |
| 14 ** an existing VFS. The code in this file attempts to verify that SQLite | |
| 15 ** correctly populates and syncs a journal file before writing to a | |
| 16 ** corresponding database file. | |
| 17 ** | |
| 18 ** INTERFACE | |
| 19 ** | |
| 20 ** The public interface to this wrapper VFS is two functions: | |
| 21 ** | |
| 22 ** jt_register() | |
| 23 ** jt_unregister() | |
| 24 ** | |
| 25 ** See header comments associated with those two functions below for | |
| 26 ** details. | |
| 27 ** | |
| 28 ** LIMITATIONS | |
| 29 ** | |
| 30 ** This wrapper will not work if "PRAGMA synchronous = off" is used. | |
| 31 ** | |
| 32 ** OPERATION | |
| 33 ** | |
| 34 ** Starting a Transaction: | |
| 35 ** | |
| 36 ** When a write-transaction is started, the contents of the database is | |
| 37 ** inspected and the following data stored as part of the database file | |
| 38 ** handle (type struct jt_file): | |
| 39 ** | |
| 40 ** a) The page-size of the database file. | |
| 41 ** b) The number of pages that are in the database file. | |
| 42 ** c) The set of page numbers corresponding to free-list leaf pages. | |
| 43 ** d) A check-sum for every page in the database file. | |
| 44 ** | |
| 45 ** The start of a write-transaction is deemed to have occurred when a | |
| 46 ** 28-byte journal header is written to byte offset 0 of the journal | |
| 47 ** file. | |
| 48 ** | |
| 49 ** Syncing the Journal File: | |
| 50 ** | |
| 51 ** Whenever the xSync method is invoked to sync a journal-file, the | |
| 52 ** contents of the journal file are read. For each page written to | |
| 53 ** the journal file, a check-sum is calculated and compared to the | |
| 54 ** check-sum calculated for the corresponding database page when the | |
| 55 ** write-transaction was initialized. The success of the comparison | |
| 56 ** is assert()ed. So if SQLite has written something other than the | |
| 57 ** original content to the database file, an assert() will fail. | |
| 58 ** | |
| 59 ** Additionally, the set of page numbers for which records exist in | |
| 60 ** the journal file is added to (unioned with) the set of page numbers | |
| 61 ** corresponding to free-list leaf pages collected when the | |
| 62 ** write-transaction was initialized. This set comprises the page-numbers | |
| 63 ** corresponding to those pages that SQLite may now safely modify. | |
| 64 ** | |
| 65 ** Writing to the Database File: | |
| 66 ** | |
| 67 ** When a block of data is written to a database file, the following | |
| 68 ** invariants are asserted: | |
| 69 ** | |
| 70 ** a) That the block of data is an aligned block of page-size bytes. | |
| 71 ** | |
| 72 ** b) That if the page being written did not exist when the | |
| 73 ** transaction was started (i.e. the database file is growing), then | |
| 74 ** the journal-file must have been synced at least once since | |
| 75 ** the start of the transaction. | |
| 76 ** | |
| 77 ** c) That if the page being written did exist when the transaction | |
| 78 ** was started, then the page must have either been a free-list | |
| 79 ** leaf page at the start of the transaction, or else must have | |
| 80 ** been stored in the journal file prior to the most recent sync. | |
| 81 ** | |
| 82 ** Closing a Transaction: | |
| 83 ** | |
| 84 ** When a transaction is closed, all data collected at the start of | |
| 85 ** the transaction, or following an xSync of a journal-file, is | |
| 86 ** discarded. The end of a transaction is recognized when any one | |
| 87 ** of the following occur: | |
| 88 ** | |
| 89 ** a) A block of zeroes (or anything else that is not a valid | |
| 90 ** journal-header) is written to the start of the journal file. | |
| 91 ** | |
| 92 ** b) A journal file is truncated to zero bytes in size using xTruncate. | |
| 93 ** | |
| 94 ** c) The journal file is deleted using xDelete. | |
| 95 */ | |
| 96 #if SQLITE_TEST /* This file is used for testing only */ | |
| 97 | |
| 98 #include "sqlite3.h" | |
| 99 #include "sqliteInt.h" | |
| 100 | |
| 101 /* | |
| 102 ** Maximum pathname length supported by the jt backend. | |
| 103 */ | |
| 104 #define JT_MAX_PATHNAME 512 | |
| 105 | |
| 106 /* | |
| 107 ** Name used to identify this VFS. | |
| 108 */ | |
| 109 #define JT_VFS_NAME "jt" | |
| 110 | |
| 111 typedef struct jt_file jt_file; | |
| 112 struct jt_file { | |
| 113 sqlite3_file base; | |
| 114 const char *zName; /* Name of open file */ | |
| 115 int flags; /* Flags the file was opened with */ | |
| 116 | |
| 117 /* The following are only used by database file file handles */ | |
| 118 int eLock; /* Current lock held on the file */ | |
| 119 u32 nPage; /* Size of file in pages when transaction started */ | |
| 120 u32 nPagesize; /* Page size when transaction started */ | |
| 121 Bitvec *pWritable; /* Bitvec of pages that may be written to the file */ | |
| 122 u32 *aCksum; /* Checksum for first nPage pages */ | |
| 123 int nSync; /* Number of times journal file has been synced */ | |
| 124 | |
| 125 /* Only used by journal file-handles */ | |
| 126 sqlite3_int64 iMaxOff; /* Maximum offset written to this transaction */ | |
| 127 | |
| 128 jt_file *pNext; /* All files are stored in a linked list */ | |
| 129 sqlite3_file *pReal; /* The file handle for the underlying vfs */ | |
| 130 }; | |
| 131 | |
| 132 /* | |
| 133 ** Method declarations for jt_file. | |
| 134 */ | |
| 135 static int jtClose(sqlite3_file*); | |
| 136 static int jtRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); | |
| 137 static int jtWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst); | |
| 138 static int jtTruncate(sqlite3_file*, sqlite3_int64 size); | |
| 139 static int jtSync(sqlite3_file*, int flags); | |
| 140 static int jtFileSize(sqlite3_file*, sqlite3_int64 *pSize); | |
| 141 static int jtLock(sqlite3_file*, int); | |
| 142 static int jtUnlock(sqlite3_file*, int); | |
| 143 static int jtCheckReservedLock(sqlite3_file*, int *); | |
| 144 static int jtFileControl(sqlite3_file*, int op, void *pArg); | |
| 145 static int jtSectorSize(sqlite3_file*); | |
| 146 static int jtDeviceCharacteristics(sqlite3_file*); | |
| 147 | |
| 148 /* | |
| 149 ** Method declarations for jt_vfs. | |
| 150 */ | |
| 151 static int jtOpen(sqlite3_vfs*, const char *, sqlite3_file*, int , int *); | |
| 152 static int jtDelete(sqlite3_vfs*, const char *zName, int syncDir); | |
| 153 static int jtAccess(sqlite3_vfs*, const char *zName, int flags, int *); | |
| 154 static int jtFullPathname(sqlite3_vfs*, const char *zName, int, char *zOut); | |
| 155 static void *jtDlOpen(sqlite3_vfs*, const char *zFilename); | |
| 156 static void jtDlError(sqlite3_vfs*, int nByte, char *zErrMsg); | |
| 157 static void (*jtDlSym(sqlite3_vfs*,void*, const char *zSymbol))(void); | |
| 158 static void jtDlClose(sqlite3_vfs*, void*); | |
| 159 static int jtRandomness(sqlite3_vfs*, int nByte, char *zOut); | |
| 160 static int jtSleep(sqlite3_vfs*, int microseconds); | |
| 161 static int jtCurrentTime(sqlite3_vfs*, double*); | |
| 162 static int jtCurrentTimeInt64(sqlite3_vfs*, sqlite3_int64*); | |
| 163 | |
| 164 static sqlite3_vfs jt_vfs = { | |
| 165 2, /* iVersion */ | |
| 166 sizeof(jt_file), /* szOsFile */ | |
| 167 JT_MAX_PATHNAME, /* mxPathname */ | |
| 168 0, /* pNext */ | |
| 169 JT_VFS_NAME, /* zName */ | |
| 170 0, /* pAppData */ | |
| 171 jtOpen, /* xOpen */ | |
| 172 jtDelete, /* xDelete */ | |
| 173 jtAccess, /* xAccess */ | |
| 174 jtFullPathname, /* xFullPathname */ | |
| 175 jtDlOpen, /* xDlOpen */ | |
| 176 jtDlError, /* xDlError */ | |
| 177 jtDlSym, /* xDlSym */ | |
| 178 jtDlClose, /* xDlClose */ | |
| 179 jtRandomness, /* xRandomness */ | |
| 180 jtSleep, /* xSleep */ | |
| 181 jtCurrentTime, /* xCurrentTime */ | |
| 182 0, /* xGetLastError */ | |
| 183 jtCurrentTimeInt64 /* xCurrentTimeInt64 */ | |
| 184 }; | |
| 185 | |
| 186 static sqlite3_io_methods jt_io_methods = { | |
| 187 1, /* iVersion */ | |
| 188 jtClose, /* xClose */ | |
| 189 jtRead, /* xRead */ | |
| 190 jtWrite, /* xWrite */ | |
| 191 jtTruncate, /* xTruncate */ | |
| 192 jtSync, /* xSync */ | |
| 193 jtFileSize, /* xFileSize */ | |
| 194 jtLock, /* xLock */ | |
| 195 jtUnlock, /* xUnlock */ | |
| 196 jtCheckReservedLock, /* xCheckReservedLock */ | |
| 197 jtFileControl, /* xFileControl */ | |
| 198 jtSectorSize, /* xSectorSize */ | |
| 199 jtDeviceCharacteristics /* xDeviceCharacteristics */ | |
| 200 }; | |
| 201 | |
| 202 struct JtGlobal { | |
| 203 sqlite3_vfs *pVfs; /* Parent VFS */ | |
| 204 jt_file *pList; /* List of all open files */ | |
| 205 }; | |
| 206 static struct JtGlobal g = {0, 0}; | |
| 207 | |
| 208 /* | |
| 209 ** Functions to obtain and relinquish a mutex to protect g.pList. The | |
| 210 ** STATIC_PRNG mutex is reused, purely for the sake of convenience. | |
| 211 */ | |
| 212 static void enterJtMutex(void){ | |
| 213 sqlite3_mutex_enter(sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_PRNG)); | |
| 214 } | |
| 215 static void leaveJtMutex(void){ | |
| 216 sqlite3_mutex_leave(sqlite3_mutex_alloc(SQLITE_MUTEX_STATIC_PRNG)); | |
| 217 } | |
| 218 | |
| 219 extern int sqlite3_io_error_pending; | |
| 220 extern int sqlite3_io_error_hit; | |
| 221 static void stop_ioerr_simulation(int *piSave, int *piSave2){ | |
| 222 *piSave = sqlite3_io_error_pending; | |
| 223 *piSave2 = sqlite3_io_error_hit; | |
| 224 sqlite3_io_error_pending = -1; | |
| 225 sqlite3_io_error_hit = 0; | |
| 226 } | |
| 227 static void start_ioerr_simulation(int iSave, int iSave2){ | |
| 228 sqlite3_io_error_pending = iSave; | |
| 229 sqlite3_io_error_hit = iSave2; | |
| 230 } | |
| 231 | |
| 232 /* | |
| 233 ** The jt_file pointed to by the argument may or may not be a file-handle | |
| 234 ** open on a main database file. If it is, and a transaction is currently | |
| 235 ** opened on the file, then discard all transaction related data. | |
| 236 */ | |
| 237 static void closeTransaction(jt_file *p){ | |
| 238 sqlite3BitvecDestroy(p->pWritable); | |
| 239 sqlite3_free(p->aCksum); | |
| 240 p->pWritable = 0; | |
| 241 p->aCksum = 0; | |
| 242 p->nSync = 0; | |
| 243 } | |
| 244 | |
| 245 /* | |
| 246 ** Close an jt-file. | |
| 247 */ | |
| 248 static int jtClose(sqlite3_file *pFile){ | |
| 249 jt_file **pp; | |
| 250 jt_file *p = (jt_file *)pFile; | |
| 251 | |
| 252 closeTransaction(p); | |
| 253 enterJtMutex(); | |
| 254 if( p->zName ){ | |
| 255 for(pp=&g.pList; *pp!=p; pp=&(*pp)->pNext); | |
| 256 *pp = p->pNext; | |
| 257 } | |
| 258 leaveJtMutex(); | |
| 259 return sqlite3OsClose(p->pReal); | |
| 260 } | |
| 261 | |
| 262 /* | |
| 263 ** Read data from an jt-file. | |
| 264 */ | |
| 265 static int jtRead( | |
| 266 sqlite3_file *pFile, | |
| 267 void *zBuf, | |
| 268 int iAmt, | |
| 269 sqlite_int64 iOfst | |
| 270 ){ | |
| 271 jt_file *p = (jt_file *)pFile; | |
| 272 return sqlite3OsRead(p->pReal, zBuf, iAmt, iOfst); | |
| 273 } | |
| 274 | |
| 275 /* | |
| 276 ** Parameter zJournal is the name of a journal file that is currently | |
| 277 ** open. This function locates and returns the handle opened on the | |
| 278 ** corresponding database file by the pager that currently has the | |
| 279 ** journal file opened. This file-handle is identified by the | |
| 280 ** following properties: | |
| 281 ** | |
| 282 ** a) SQLITE_OPEN_MAIN_DB was specified when the file was opened. | |
| 283 ** | |
| 284 ** b) The file-name specified when the file was opened matches | |
| 285 ** all but the final 8 characters of the journal file name. | |
| 286 ** | |
| 287 ** c) There is currently a reserved lock on the file. | |
| 288 **/ | |
| 289 static jt_file *locateDatabaseHandle(const char *zJournal){ | |
| 290 jt_file *pMain = 0; | |
| 291 enterJtMutex(); | |
| 292 for(pMain=g.pList; pMain; pMain=pMain->pNext){ | |
| 293 int nName = (int)(strlen(zJournal) - strlen("-journal")); | |
| 294 if( (pMain->flags&SQLITE_OPEN_MAIN_DB) | |
| 295 && ((int)strlen(pMain->zName)==nName) | |
| 296 && 0==memcmp(pMain->zName, zJournal, nName) | |
| 297 && (pMain->eLock>=SQLITE_LOCK_RESERVED) | |
| 298 ){ | |
| 299 break; | |
| 300 } | |
| 301 } | |
| 302 leaveJtMutex(); | |
| 303 return pMain; | |
| 304 } | |
| 305 | |
| 306 /* | |
| 307 ** Parameter z points to a buffer of 4 bytes in size containing a | |
| 308 ** unsigned 32-bit integer stored in big-endian format. Decode the | |
| 309 ** integer and return its value. | |
| 310 */ | |
| 311 static u32 decodeUint32(const unsigned char *z){ | |
| 312 return (z[0]<<24) + (z[1]<<16) + (z[2]<<8) + z[3]; | |
| 313 } | |
| 314 | |
| 315 /* | |
| 316 ** Calculate a checksum from the buffer of length n bytes pointed to | |
| 317 ** by parameter z. | |
| 318 */ | |
| 319 static u32 genCksum(const unsigned char *z, int n){ | |
| 320 int i; | |
| 321 u32 cksum = 0; | |
| 322 for(i=0; i<n; i++){ | |
| 323 cksum = cksum + z[i] + (cksum<<3); | |
| 324 } | |
| 325 return cksum; | |
| 326 } | |
| 327 | |
| 328 /* | |
| 329 ** The first argument, zBuf, points to a buffer containing a 28 byte | |
| 330 ** serialized journal header. This function deserializes four of the | |
| 331 ** integer fields contained in the journal header and writes their | |
| 332 ** values to the output variables. | |
| 333 ** | |
| 334 ** SQLITE_OK is returned if the journal-header is successfully | |
| 335 ** decoded. Otherwise, SQLITE_ERROR. | |
| 336 */ | |
| 337 static int decodeJournalHdr( | |
| 338 const unsigned char *zBuf, /* Input: 28 byte journal header */ | |
| 339 u32 *pnRec, /* Out: Number of journalled records */ | |
| 340 u32 *pnPage, /* Out: Original database page count */ | |
| 341 u32 *pnSector, /* Out: Sector size in bytes */ | |
| 342 u32 *pnPagesize /* Out: Page size in bytes */ | |
| 343 ){ | |
| 344 unsigned char aMagic[] = { 0xd9, 0xd5, 0x05, 0xf9, 0x20, 0xa1, 0x63, 0xd7 }; | |
| 345 if( memcmp(aMagic, zBuf, 8) ) return SQLITE_ERROR; | |
| 346 if( pnRec ) *pnRec = decodeUint32(&zBuf[8]); | |
| 347 if( pnPage ) *pnPage = decodeUint32(&zBuf[16]); | |
| 348 if( pnSector ) *pnSector = decodeUint32(&zBuf[20]); | |
| 349 if( pnPagesize ) *pnPagesize = decodeUint32(&zBuf[24]); | |
| 350 return SQLITE_OK; | |
| 351 } | |
| 352 | |
| 353 /* | |
| 354 ** This function is called when a new transaction is opened, just after | |
| 355 ** the first journal-header is written to the journal file. | |
| 356 */ | |
| 357 static int openTransaction(jt_file *pMain, jt_file *pJournal){ | |
| 358 unsigned char *aData; | |
| 359 sqlite3_file *p = pMain->pReal; | |
| 360 int rc = SQLITE_OK; | |
| 361 | |
| 362 closeTransaction(pMain); | |
| 363 aData = sqlite3_malloc(pMain->nPagesize); | |
| 364 pMain->pWritable = sqlite3BitvecCreate(pMain->nPage); | |
| 365 pMain->aCksum = sqlite3_malloc(sizeof(u32) * (pMain->nPage + 1)); | |
| 366 pJournal->iMaxOff = 0; | |
| 367 | |
| 368 if( !pMain->pWritable || !pMain->aCksum || !aData ){ | |
| 369 rc = SQLITE_IOERR_NOMEM; | |
| 370 }else if( pMain->nPage>0 ){ | |
| 371 u32 iTrunk; | |
| 372 int iSave; | |
| 373 int iSave2; | |
| 374 | |
| 375 stop_ioerr_simulation(&iSave, &iSave2); | |
| 376 | |
| 377 /* Read the database free-list. Add the page-number for each free-list | |
| 378 ** leaf to the jt_file.pWritable bitvec. | |
| 379 */ | |
| 380 rc = sqlite3OsRead(p, aData, pMain->nPagesize, 0); | |
| 381 if( rc==SQLITE_OK ){ | |
| 382 u32 nDbsize = decodeUint32(&aData[28]); | |
| 383 if( nDbsize>0 && memcmp(&aData[24], &aData[92], 4)==0 ){ | |
| 384 u32 iPg; | |
| 385 for(iPg=nDbsize+1; iPg<=pMain->nPage; iPg++){ | |
| 386 sqlite3BitvecSet(pMain->pWritable, iPg); | |
| 387 } | |
| 388 } | |
| 389 } | |
| 390 iTrunk = decodeUint32(&aData[32]); | |
| 391 while( rc==SQLITE_OK && iTrunk>0 ){ | |
| 392 u32 nLeaf; | |
| 393 u32 iLeaf; | |
| 394 sqlite3_int64 iOff = (i64)(iTrunk-1)*pMain->nPagesize; | |
| 395 rc = sqlite3OsRead(p, aData, pMain->nPagesize, iOff); | |
| 396 nLeaf = decodeUint32(&aData[4]); | |
| 397 for(iLeaf=0; rc==SQLITE_OK && iLeaf<nLeaf; iLeaf++){ | |
| 398 u32 pgno = decodeUint32(&aData[8+4*iLeaf]); | |
| 399 sqlite3BitvecSet(pMain->pWritable, pgno); | |
| 400 } | |
| 401 iTrunk = decodeUint32(aData); | |
| 402 } | |
| 403 | |
| 404 /* Calculate and store a checksum for each page in the database file. */ | |
| 405 if( rc==SQLITE_OK ){ | |
| 406 int ii; | |
| 407 for(ii=0; rc==SQLITE_OK && ii<(int)pMain->nPage; ii++){ | |
| 408 i64 iOff = (i64)(pMain->nPagesize) * (i64)ii; | |
| 409 if( iOff==PENDING_BYTE ) continue; | |
| 410 rc = sqlite3OsRead(pMain->pReal, aData, pMain->nPagesize, iOff); | |
| 411 pMain->aCksum[ii] = genCksum(aData, pMain->nPagesize); | |
| 412 if( ii+1==pMain->nPage && rc==SQLITE_IOERR_SHORT_READ ) rc = SQLITE_OK; | |
| 413 } | |
| 414 } | |
| 415 | |
| 416 start_ioerr_simulation(iSave, iSave2); | |
| 417 } | |
| 418 | |
| 419 sqlite3_free(aData); | |
| 420 return rc; | |
| 421 } | |
| 422 | |
| 423 /* | |
| 424 ** The first argument to this function is a handle open on a journal file. | |
| 425 ** This function reads the journal file and adds the page number for each | |
| 426 ** page in the journal to the Bitvec object passed as the second argument. | |
| 427 */ | |
| 428 static int readJournalFile(jt_file *p, jt_file *pMain){ | |
| 429 int rc = SQLITE_OK; | |
| 430 unsigned char zBuf[28]; | |
| 431 sqlite3_file *pReal = p->pReal; | |
| 432 sqlite3_int64 iOff = 0; | |
| 433 sqlite3_int64 iSize = p->iMaxOff; | |
| 434 unsigned char *aPage; | |
| 435 int iSave; | |
| 436 int iSave2; | |
| 437 | |
| 438 aPage = sqlite3_malloc(pMain->nPagesize); | |
| 439 if( !aPage ){ | |
| 440 return SQLITE_IOERR_NOMEM; | |
| 441 } | |
| 442 | |
| 443 stop_ioerr_simulation(&iSave, &iSave2); | |
| 444 | |
| 445 while( rc==SQLITE_OK && iOff<iSize ){ | |
| 446 u32 nRec, nPage, nSector, nPagesize; | |
| 447 u32 ii; | |
| 448 | |
| 449 /* Read and decode the next journal-header from the journal file. */ | |
| 450 rc = sqlite3OsRead(pReal, zBuf, 28, iOff); | |
| 451 if( rc!=SQLITE_OK | |
| 452 || decodeJournalHdr(zBuf, &nRec, &nPage, &nSector, &nPagesize) | |
| 453 ){ | |
| 454 goto finish_rjf; | |
| 455 } | |
| 456 iOff += nSector; | |
| 457 | |
| 458 if( nRec==0 ){ | |
| 459 /* A trick. There might be another journal-header immediately | |
| 460 ** following this one. In this case, 0 records means 0 records, | |
| 461 ** not "read until the end of the file". See also ticket #2565. | |
| 462 */ | |
| 463 if( iSize>=(iOff+nSector) ){ | |
| 464 rc = sqlite3OsRead(pReal, zBuf, 28, iOff); | |
| 465 if( rc!=SQLITE_OK || 0==decodeJournalHdr(zBuf, 0, 0, 0, 0) ){ | |
| 466 continue; | |
| 467 } | |
| 468 } | |
| 469 nRec = (u32)((iSize-iOff) / (pMain->nPagesize+8)); | |
| 470 } | |
| 471 | |
| 472 /* Read all the records that follow the journal-header just read. */ | |
| 473 for(ii=0; rc==SQLITE_OK && ii<nRec && iOff<iSize; ii++){ | |
| 474 u32 pgno; | |
| 475 rc = sqlite3OsRead(pReal, zBuf, 4, iOff); | |
| 476 if( rc==SQLITE_OK ){ | |
| 477 pgno = decodeUint32(zBuf); | |
| 478 if( pgno>0 && pgno<=pMain->nPage ){ | |
| 479 if( 0==sqlite3BitvecTest(pMain->pWritable, pgno) ){ | |
| 480 rc = sqlite3OsRead(pReal, aPage, pMain->nPagesize, iOff+4); | |
| 481 if( rc==SQLITE_OK ){ | |
| 482 u32 cksum = genCksum(aPage, pMain->nPagesize); | |
| 483 assert( cksum==pMain->aCksum[pgno-1] ); | |
| 484 } | |
| 485 } | |
| 486 sqlite3BitvecSet(pMain->pWritable, pgno); | |
| 487 } | |
| 488 iOff += (8 + pMain->nPagesize); | |
| 489 } | |
| 490 } | |
| 491 | |
| 492 iOff = ((iOff + (nSector-1)) / nSector) * nSector; | |
| 493 } | |
| 494 | |
| 495 finish_rjf: | |
| 496 start_ioerr_simulation(iSave, iSave2); | |
| 497 sqlite3_free(aPage); | |
| 498 if( rc==SQLITE_IOERR_SHORT_READ ){ | |
| 499 rc = SQLITE_OK; | |
| 500 } | |
| 501 return rc; | |
| 502 } | |
| 503 | |
| 504 /* | |
| 505 ** Write data to an jt-file. | |
| 506 */ | |
| 507 static int jtWrite( | |
| 508 sqlite3_file *pFile, | |
| 509 const void *zBuf, | |
| 510 int iAmt, | |
| 511 sqlite_int64 iOfst | |
| 512 ){ | |
| 513 int rc; | |
| 514 jt_file *p = (jt_file *)pFile; | |
| 515 if( p->flags&SQLITE_OPEN_MAIN_JOURNAL ){ | |
| 516 if( iOfst==0 ){ | |
| 517 jt_file *pMain = locateDatabaseHandle(p->zName); | |
| 518 assert( pMain ); | |
| 519 | |
| 520 if( iAmt==28 ){ | |
| 521 /* Zeroing the first journal-file header. This is the end of a | |
| 522 ** transaction. */ | |
| 523 closeTransaction(pMain); | |
| 524 }else if( iAmt!=12 ){ | |
| 525 /* Writing the first journal header to a journal file. This happens | |
| 526 ** when a transaction is first started. */ | |
| 527 u8 *z = (u8 *)zBuf; | |
| 528 pMain->nPage = decodeUint32(&z[16]); | |
| 529 pMain->nPagesize = decodeUint32(&z[24]); | |
| 530 if( SQLITE_OK!=(rc=openTransaction(pMain, p)) ){ | |
| 531 return rc; | |
| 532 } | |
| 533 } | |
| 534 } | |
| 535 if( p->iMaxOff<(iOfst + iAmt) ){ | |
| 536 p->iMaxOff = iOfst + iAmt; | |
| 537 } | |
| 538 } | |
| 539 | |
| 540 if( p->flags&SQLITE_OPEN_MAIN_DB && p->pWritable ){ | |
| 541 if( iAmt<(int)p->nPagesize | |
| 542 && p->nPagesize%iAmt==0 | |
| 543 && iOfst>=(PENDING_BYTE+512) | |
| 544 && iOfst+iAmt<=PENDING_BYTE+p->nPagesize | |
| 545 ){ | |
| 546 /* No-op. This special case is hit when the backup code is copying a | |
| 547 ** to a database with a larger page-size than the source database and | |
| 548 ** it needs to fill in the non-locking-region part of the original | |
| 549 ** pending-byte page. | |
| 550 */ | |
| 551 }else{ | |
| 552 u32 pgno = (u32)(iOfst/p->nPagesize + 1); | |
| 553 assert( (iAmt==1||iAmt==p->nPagesize) && ((iOfst+iAmt)%p->nPagesize)==0 ); | |
| 554 assert( pgno<=p->nPage || p->nSync>0 ); | |
| 555 assert( pgno>p->nPage || sqlite3BitvecTest(p->pWritable, pgno) ); | |
| 556 } | |
| 557 } | |
| 558 | |
| 559 rc = sqlite3OsWrite(p->pReal, zBuf, iAmt, iOfst); | |
| 560 if( (p->flags&SQLITE_OPEN_MAIN_JOURNAL) && iAmt==12 ){ | |
| 561 jt_file *pMain = locateDatabaseHandle(p->zName); | |
| 562 int rc2 = readJournalFile(p, pMain); | |
| 563 if( rc==SQLITE_OK ) rc = rc2; | |
| 564 } | |
| 565 return rc; | |
| 566 } | |
| 567 | |
| 568 /* | |
| 569 ** Truncate an jt-file. | |
| 570 */ | |
| 571 static int jtTruncate(sqlite3_file *pFile, sqlite_int64 size){ | |
| 572 jt_file *p = (jt_file *)pFile; | |
| 573 if( p->flags&SQLITE_OPEN_MAIN_JOURNAL && size==0 ){ | |
| 574 /* Truncating a journal file. This is the end of a transaction. */ | |
| 575 jt_file *pMain = locateDatabaseHandle(p->zName); | |
| 576 closeTransaction(pMain); | |
| 577 } | |
| 578 if( p->flags&SQLITE_OPEN_MAIN_DB && p->pWritable ){ | |
| 579 u32 pgno; | |
| 580 u32 locking_page = (u32)(PENDING_BYTE/p->nPagesize+1); | |
| 581 for(pgno=(u32)(size/p->nPagesize+1); pgno<=p->nPage; pgno++){ | |
| 582 assert( pgno==locking_page || sqlite3BitvecTest(p->pWritable, pgno) ); | |
| 583 } | |
| 584 } | |
| 585 return sqlite3OsTruncate(p->pReal, size); | |
| 586 } | |
| 587 | |
| 588 /* | |
| 589 ** Sync an jt-file. | |
| 590 */ | |
| 591 static int jtSync(sqlite3_file *pFile, int flags){ | |
| 592 jt_file *p = (jt_file *)pFile; | |
| 593 | |
| 594 if( p->flags&SQLITE_OPEN_MAIN_JOURNAL ){ | |
| 595 int rc; | |
| 596 jt_file *pMain; /* The associated database file */ | |
| 597 | |
| 598 /* The journal file is being synced. At this point, we inspect the | |
| 599 ** contents of the file up to this point and set each bit in the | |
| 600 ** jt_file.pWritable bitvec of the main database file associated with | |
| 601 ** this journal file. | |
| 602 */ | |
| 603 pMain = locateDatabaseHandle(p->zName); | |
| 604 assert(pMain); | |
| 605 | |
| 606 /* Set the bitvec values */ | |
| 607 if( pMain->pWritable ){ | |
| 608 pMain->nSync++; | |
| 609 rc = readJournalFile(p, pMain); | |
| 610 if( rc!=SQLITE_OK ){ | |
| 611 return rc; | |
| 612 } | |
| 613 } | |
| 614 } | |
| 615 | |
| 616 return sqlite3OsSync(p->pReal, flags); | |
| 617 } | |
| 618 | |
| 619 /* | |
| 620 ** Return the current file-size of an jt-file. | |
| 621 */ | |
| 622 static int jtFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){ | |
| 623 jt_file *p = (jt_file *)pFile; | |
| 624 return sqlite3OsFileSize(p->pReal, pSize); | |
| 625 } | |
| 626 | |
| 627 /* | |
| 628 ** Lock an jt-file. | |
| 629 */ | |
| 630 static int jtLock(sqlite3_file *pFile, int eLock){ | |
| 631 int rc; | |
| 632 jt_file *p = (jt_file *)pFile; | |
| 633 rc = sqlite3OsLock(p->pReal, eLock); | |
| 634 if( rc==SQLITE_OK && eLock>p->eLock ){ | |
| 635 p->eLock = eLock; | |
| 636 } | |
| 637 return rc; | |
| 638 } | |
| 639 | |
| 640 /* | |
| 641 ** Unlock an jt-file. | |
| 642 */ | |
| 643 static int jtUnlock(sqlite3_file *pFile, int eLock){ | |
| 644 int rc; | |
| 645 jt_file *p = (jt_file *)pFile; | |
| 646 rc = sqlite3OsUnlock(p->pReal, eLock); | |
| 647 if( rc==SQLITE_OK && eLock<p->eLock ){ | |
| 648 p->eLock = eLock; | |
| 649 } | |
| 650 return rc; | |
| 651 } | |
| 652 | |
| 653 /* | |
| 654 ** Check if another file-handle holds a RESERVED lock on an jt-file. | |
| 655 */ | |
| 656 static int jtCheckReservedLock(sqlite3_file *pFile, int *pResOut){ | |
| 657 jt_file *p = (jt_file *)pFile; | |
| 658 return sqlite3OsCheckReservedLock(p->pReal, pResOut); | |
| 659 } | |
| 660 | |
| 661 /* | |
| 662 ** File control method. For custom operations on an jt-file. | |
| 663 */ | |
| 664 static int jtFileControl(sqlite3_file *pFile, int op, void *pArg){ | |
| 665 jt_file *p = (jt_file *)pFile; | |
| 666 return p->pReal->pMethods->xFileControl(p->pReal, op, pArg); | |
| 667 } | |
| 668 | |
| 669 /* | |
| 670 ** Return the sector-size in bytes for an jt-file. | |
| 671 */ | |
| 672 static int jtSectorSize(sqlite3_file *pFile){ | |
| 673 jt_file *p = (jt_file *)pFile; | |
| 674 return sqlite3OsSectorSize(p->pReal); | |
| 675 } | |
| 676 | |
| 677 /* | |
| 678 ** Return the device characteristic flags supported by an jt-file. | |
| 679 */ | |
| 680 static int jtDeviceCharacteristics(sqlite3_file *pFile){ | |
| 681 jt_file *p = (jt_file *)pFile; | |
| 682 return sqlite3OsDeviceCharacteristics(p->pReal); | |
| 683 } | |
| 684 | |
| 685 /* | |
| 686 ** Open an jt file handle. | |
| 687 */ | |
| 688 static int jtOpen( | |
| 689 sqlite3_vfs *pVfs, | |
| 690 const char *zName, | |
| 691 sqlite3_file *pFile, | |
| 692 int flags, | |
| 693 int *pOutFlags | |
| 694 ){ | |
| 695 int rc; | |
| 696 jt_file *p = (jt_file *)pFile; | |
| 697 pFile->pMethods = 0; | |
| 698 p->pReal = (sqlite3_file *)&p[1]; | |
| 699 p->pReal->pMethods = 0; | |
| 700 rc = sqlite3OsOpen(g.pVfs, zName, p->pReal, flags, pOutFlags); | |
| 701 assert( rc==SQLITE_OK || p->pReal->pMethods==0 ); | |
| 702 if( rc==SQLITE_OK ){ | |
| 703 pFile->pMethods = &jt_io_methods; | |
| 704 p->eLock = 0; | |
| 705 p->zName = zName; | |
| 706 p->flags = flags; | |
| 707 p->pNext = 0; | |
| 708 p->pWritable = 0; | |
| 709 p->aCksum = 0; | |
| 710 enterJtMutex(); | |
| 711 if( zName ){ | |
| 712 p->pNext = g.pList; | |
| 713 g.pList = p; | |
| 714 } | |
| 715 leaveJtMutex(); | |
| 716 } | |
| 717 return rc; | |
| 718 } | |
| 719 | |
| 720 /* | |
| 721 ** Delete the file located at zPath. If the dirSync argument is true, | |
| 722 ** ensure the file-system modifications are synced to disk before | |
| 723 ** returning. | |
| 724 */ | |
| 725 static int jtDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){ | |
| 726 int nPath = (int)strlen(zPath); | |
| 727 if( nPath>8 && 0==strcmp("-journal", &zPath[nPath-8]) ){ | |
| 728 /* Deleting a journal file. The end of a transaction. */ | |
| 729 jt_file *pMain = locateDatabaseHandle(zPath); | |
| 730 if( pMain ){ | |
| 731 closeTransaction(pMain); | |
| 732 } | |
| 733 } | |
| 734 | |
| 735 return sqlite3OsDelete(g.pVfs, zPath, dirSync); | |
| 736 } | |
| 737 | |
| 738 /* | |
| 739 ** Test for access permissions. Return true if the requested permission | |
| 740 ** is available, or false otherwise. | |
| 741 */ | |
| 742 static int jtAccess( | |
| 743 sqlite3_vfs *pVfs, | |
| 744 const char *zPath, | |
| 745 int flags, | |
| 746 int *pResOut | |
| 747 ){ | |
| 748 return sqlite3OsAccess(g.pVfs, zPath, flags, pResOut); | |
| 749 } | |
| 750 | |
| 751 /* | |
| 752 ** Populate buffer zOut with the full canonical pathname corresponding | |
| 753 ** to the pathname in zPath. zOut is guaranteed to point to a buffer | |
| 754 ** of at least (JT_MAX_PATHNAME+1) bytes. | |
| 755 */ | |
| 756 static int jtFullPathname( | |
| 757 sqlite3_vfs *pVfs, | |
| 758 const char *zPath, | |
| 759 int nOut, | |
| 760 char *zOut | |
| 761 ){ | |
| 762 return sqlite3OsFullPathname(g.pVfs, zPath, nOut, zOut); | |
| 763 } | |
| 764 | |
| 765 /* | |
| 766 ** Open the dynamic library located at zPath and return a handle. | |
| 767 */ | |
| 768 static void *jtDlOpen(sqlite3_vfs *pVfs, const char *zPath){ | |
| 769 return g.pVfs->xDlOpen(g.pVfs, zPath); | |
| 770 } | |
| 771 | |
| 772 /* | |
| 773 ** Populate the buffer zErrMsg (size nByte bytes) with a human readable | |
| 774 ** utf-8 string describing the most recent error encountered associated | |
| 775 ** with dynamic libraries. | |
| 776 */ | |
| 777 static void jtDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){ | |
| 778 g.pVfs->xDlError(g.pVfs, nByte, zErrMsg); | |
| 779 } | |
| 780 | |
| 781 /* | |
| 782 ** Return a pointer to the symbol zSymbol in the dynamic library pHandle. | |
| 783 */ | |
| 784 static void (*jtDlSym(sqlite3_vfs *pVfs, void *p, const char *zSym))(void){ | |
| 785 return g.pVfs->xDlSym(g.pVfs, p, zSym); | |
| 786 } | |
| 787 | |
| 788 /* | |
| 789 ** Close the dynamic library handle pHandle. | |
| 790 */ | |
| 791 static void jtDlClose(sqlite3_vfs *pVfs, void *pHandle){ | |
| 792 g.pVfs->xDlClose(g.pVfs, pHandle); | |
| 793 } | |
| 794 | |
| 795 /* | |
| 796 ** Populate the buffer pointed to by zBufOut with nByte bytes of | |
| 797 ** random data. | |
| 798 */ | |
| 799 static int jtRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){ | |
| 800 return sqlite3OsRandomness(g.pVfs, nByte, zBufOut); | |
| 801 } | |
| 802 | |
| 803 /* | |
| 804 ** Sleep for nMicro microseconds. Return the number of microseconds | |
| 805 ** actually slept. | |
| 806 */ | |
| 807 static int jtSleep(sqlite3_vfs *pVfs, int nMicro){ | |
| 808 return sqlite3OsSleep(g.pVfs, nMicro); | |
| 809 } | |
| 810 | |
| 811 /* | |
| 812 ** Return the current time as a Julian Day number in *pTimeOut. | |
| 813 */ | |
| 814 static int jtCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){ | |
| 815 return g.pVfs->xCurrentTime(g.pVfs, pTimeOut); | |
| 816 } | |
| 817 /* | |
| 818 ** Return the current time as a Julian Day number in *pTimeOut. | |
| 819 */ | |
| 820 static int jtCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *pTimeOut){ | |
| 821 return g.pVfs->xCurrentTimeInt64(g.pVfs, pTimeOut); | |
| 822 } | |
| 823 | |
| 824 /************************************************************************** | |
| 825 ** Start of public API. | |
| 826 */ | |
| 827 | |
| 828 /* | |
| 829 ** Configure the jt VFS as a wrapper around the VFS named by parameter | |
| 830 ** zWrap. If the isDefault parameter is true, then the jt VFS is installed | |
| 831 ** as the new default VFS for SQLite connections. If isDefault is not | |
| 832 ** true, then the jt VFS is installed as non-default. In this case it | |
| 833 ** is available via its name, "jt". | |
| 834 */ | |
| 835 int jt_register(char *zWrap, int isDefault){ | |
| 836 g.pVfs = sqlite3_vfs_find(zWrap); | |
| 837 if( g.pVfs==0 ){ | |
| 838 return SQLITE_ERROR; | |
| 839 } | |
| 840 jt_vfs.szOsFile = sizeof(jt_file) + g.pVfs->szOsFile; | |
| 841 if( g.pVfs->iVersion==1 ){ | |
| 842 jt_vfs.iVersion = 1; | |
| 843 }else if( g.pVfs->xCurrentTimeInt64==0 ){ | |
| 844 jt_vfs.xCurrentTimeInt64 = 0; | |
| 845 } | |
| 846 sqlite3_vfs_register(&jt_vfs, isDefault); | |
| 847 return SQLITE_OK; | |
| 848 } | |
| 849 | |
| 850 /* | |
| 851 ** Uninstall the jt VFS, if it is installed. | |
| 852 */ | |
| 853 void jt_unregister(void){ | |
| 854 sqlite3_vfs_unregister(&jt_vfs); | |
| 855 } | |
| 856 | |
| 857 #endif | |
| OLD | NEW |
|---|
Chromium Code Reviews
Issue 2363173002:
[sqlite] Remove obsolete reference version 3.8.7.4. (Closed)
