Update libsrtp to version 2.0

srtp/test/rtpw_test_gcm.sh

Index: srtp/test/rtpw_test_gcm.sh
diff --git a/srtp/test/rtpw_test_gcm.sh b/srtp/test/rtpw_test_gcm.sh
deleted file mode 100755
index 6e58b6c88e44a31ee7b3787041a82d56cb4b4d7a..0000000000000000000000000000000000000000
--- a/srtp/test/rtpw_test_gcm.sh
+++ /dev/null
@@ -1,237 +0,0 @@
-#!/bin/sh
-# 
-# usage: rtpw_test <rtpw_commands>
-# 
-# tests the rtpw sender and receiver functions
-#
-# Copyright (c) 2001-2006, Cisco Systems, Inc.
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 
-#   Redistributions of source code must retain the above copyright
-#   notice, this list of conditions and the following disclaimer.
-# 
-#   Redistributions in binary form must reproduce the above
-#   copyright notice, this list of conditions and the following
-#   disclaimer in the documentation and/or other materials provided
-#   with the distribution.
-# 
-#   Neither the name of the Cisco Systems, Inc. nor the names of its
-#   contributors may be used to endorse or promote products derived
-#   from this software without specific prior written permission.
-# 
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
-# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-# OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-RTPW=./rtpw
-DEST_PORT=9999
-DURATION=3
-
-# First, we run "killall" to get rid of all existing rtpw processes.
-# This step also enables this script to clean up after itself; if this
-# script is interrupted after the rtpw processes are started but before
-# they are killed, those processes will linger.  Re-running the script
-# will get rid of them.
-
-killall rtpw 2>/dev/null
-
-if test -x $RTPW; then
-
-GCMARGS128="-k 01234567890123456789012345678901234567890123456789012345 -g -e 128"
-echo  $0 ": starting GCM mode 128-bit rtpw receiver process... "
-
-exec $RTPW $* $GCMARGS128 -r 127.0.0.1 $DEST_PORT &
-
-receiver_pid=$!
-
-echo $0 ": receiver PID = $receiver_pid"
-
-sleep 1 
-
-# verify that the background job is running
-ps | grep -q $receiver_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 254
-fi
-
-echo  $0 ": starting GCM 128-bit rtpw sender process..."
-
-exec $RTPW $* $GCMARGS128 -s 127.0.0.1 $DEST_PORT  &
-
-sender_pid=$!
-
-echo $0 ": sender PID = $sender_pid"
-
-# verify that the background job is running
-ps | grep -q $sender_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 255
-fi
-
-sleep $DURATION
-
-kill $receiver_pid
-kill $sender_pid
-
-GCMARGS128="-k 01234567890123456789012345678901234567890123456789012345 -g -t 16 -e 128"
-echo  $0 ": starting GCM mode 128-bit (16 byte tag) rtpw receiver process... "
-
-exec $RTPW $* $GCMARGS128 -r 127.0.0.1 $DEST_PORT &
-
-receiver_pid=$!
-
-echo $0 ": receiver PID = $receiver_pid"
-
-sleep 1 
-
-# verify that the background job is running
-ps | grep -q $receiver_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 254
-fi
-
-echo  $0 ": starting GCM 128-bit (16 byte tag) rtpw sender process..."
-
-exec $RTPW $* $GCMARGS128 -s 127.0.0.1 $DEST_PORT  &
-
-sender_pid=$!
-
-echo $0 ": sender PID = $sender_pid"
-
-# verify that the background job is running
-ps | grep -q $sender_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 255
-fi
-
-sleep $DURATION
-
-kill $receiver_pid
-kill $sender_pid
-
-
-
-GCMARGS256="-k 0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567 -g -e 256"
-echo  $0 ": starting GCM mode 256-bit rtpw receiver process... "
-
-exec $RTPW $* $GCMARGS256 -r 127.0.0.1 $DEST_PORT &
-
-receiver_pid=$!
-
-echo $0 ": receiver PID = $receiver_pid"
-
-sleep 1 
-
-# verify that the background job is running
-ps | grep -q $receiver_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 254
-fi
-
-echo  $0 ": starting GCM 256-bit rtpw sender process..."
-
-exec $RTPW $* $GCMARGS256 -s 127.0.0.1 $DEST_PORT  &
-
-sender_pid=$!
-
-echo $0 ": sender PID = $sender_pid"
-
-# verify that the background job is running
-ps | grep -q $sender_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 255
-fi
-
-sleep $DURATION
-
-kill $receiver_pid
-kill $sender_pid
-
-
-GCMARGS256="-k a123456789012345678901234567890123456789012345678901234567890123456789012345678901234567 -g -t 16 -e 256"
-echo  $0 ": starting GCM mode 256-bit (16 byte tag) rtpw receiver process... "
-
-exec $RTPW $* $GCMARGS256 -r 127.0.0.1 $DEST_PORT &
-
-receiver_pid=$!
-
-echo $0 ": receiver PID = $receiver_pid"
-
-sleep 1 
-
-# verify that the background job is running
-ps | grep -q $receiver_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 254
-fi
-
-echo  $0 ": starting GCM 256-bit (16 byte tag) rtpw sender process..."
-
-exec $RTPW $* $GCMARGS256 -s 127.0.0.1 $DEST_PORT  &
-
-sender_pid=$!
-
-echo $0 ": sender PID = $sender_pid"
-
-# verify that the background job is running
-ps | grep -q $sender_pid
-retval=$?
-echo $retval
-if [ $retval != 0 ]; then
-    echo $0 ": error"
-    exit 255
-fi
-
-sleep $DURATION
-
-kill $receiver_pid
-kill $sender_pid
-
-
-echo $0 ": done (test passed)"
-
-else 
-
-echo "error: can't find executable" $RTPW
-exit 1
-
-fi
-
-# EOF
-
-