[tracing] Add filtering mode in TraceLog

base/trace_event/trace_log.cc

Index: base/trace_event/trace_log.cc
diff --git a/base/trace_event/trace_log.cc b/base/trace_event/trace_log.cc
index c56f5c7894cc9df80a22ff10d0b51870e4af10fc..02d4e159c60e728184c266b406daf7658a36f106 100644
--- a/base/trace_event/trace_log.cc
+++ b/base/trace_event/trace_log.cc
@@ -462,7 +462,7 @@ TraceLog* TraceLog::GetInstance() {
 }
 
 TraceLog::TraceLog()
-    : mode_(DISABLED),
+    : enabled_modes_(0),
       num_traces_recorded_(0),
       event_callback_(0),
       dispatching_to_observer_list_(false),
@@ -560,7 +560,7 @@ const char* TraceLog::GetCategoryGroupName(
 void TraceLog::UpdateCategoryGroupEnabledFlag(size_t category_index) {
   unsigned char enabled_flag = 0;
   const char* category_group = g_category_groups[category_index];
-  if (mode_ == RECORDING_MODE &&
+  if (enabled_modes_ & RECORDING_MODE &&
       trace_config_.IsCategoryGroupEnabled(category_group)) {
     enabled_flag |= ENABLED_FOR_RECORDING;
   }
@@ -580,12 +580,12 @@ void TraceLog::UpdateCategoryGroupEnabledFlag(size_t category_index) {
   // TODO(primiano): this is a temporary workaround for catapult:#2341,
   // to guarantee that metadata events are always added even if the category
   // filter is "-*". See crbug.com/618054 for more details and long-term fix.
-  if (mode_ == RECORDING_MODE && !strcmp(category_group, "__metadata"))
+  if (enabled_modes_ & RECORDING_MODE && !strcmp(category_group, "__metadata"))
     enabled_flag |= ENABLED_FOR_RECORDING;
 
   uint32_t enabled_filters_bitmap = 0;
   int index = 0;
-  for (const auto& event_filter : trace_config_.event_filters()) {
+  for (const auto& event_filter : event_filters_enabled_) {
     if (event_filter.IsCategoryGroupEnabled(category_group)) {
       enabled_flag |= ENABLED_FOR_FILTERING;
       DCHECK(g_category_group_filters.Get()[index]);
@@ -609,12 +609,15 @@ void TraceLog::UpdateCategoryGroupEnabledFlags() {
 }
 
 void TraceLog::CreateFiltersForTraceConfig() {
+  if (!(enabled_modes_ & FILTERING_MODE))
+    return;
+
   // Filters were already added and tracing could be enabled. Filters list
   // cannot be changed when trace events are using them.
   if (g_category_group_filters.Get().size())
     return;
 
-  for (auto& event_filter : trace_config_.event_filters()) {
+  for (auto& event_filter : event_filters_enabled_) {
     if (g_category_group_filters.Get().size() >= MAX_TRACE_EVENT_FILTERS) {
       NOTREACHED()
           << "Too many trace event filters installed in the current session";
@@ -727,7 +730,7 @@ void TraceLog::GetKnownCategoryGroups(
     category_groups->push_back(g_category_groups[i]);
 }
 
-void TraceLog::SetEnabled(const TraceConfig& trace_config, Mode mode) {
+void TraceLog::SetEnabled(const TraceConfig& trace_config, uint8_t modes) {
   std::vector<EnabledStateObserver*> observer_list;
   std::map<AsyncEnabledStateObserver*, RegisteredAsyncObserver> observer_map;
   {
@@ -741,32 +744,55 @@ void TraceLog::SetEnabled(const TraceConfig& trace_config, Mode mode) {
 
     InternalTraceOptions old_options = trace_options();
 
-    if (IsEnabled()) {
-      if (new_options != old_options) {
-        DLOG(ERROR) << "Attempting to re-enable tracing with a different "
-                    << "set of options.";
-      }
+    if (dispatching_to_observer_list_) {
+      NOTREACHED()
+          << "Cannot manipulate TraceLog::Enabled state from an observer.";
+      return;
+    }
 
-      if (mode != mode_) {
-        DLOG(ERROR) << "Attempting to re-enable tracing with a different mode.";
+    // Clear all filters from previous tracing session. These filters are not
+    // cleared at the end of tracing because some threads which hit trace event
+    // when disabling, could try to use the filters.
+    if (!enabled_modes_)
+      g_category_group_filters.Get().clear();
+
+    // Update trace config for recording.
+    const bool already_recording = enabled_modes_ & RECORDING_MODE;
+    if (modes & RECORDING_MODE) {
+      if (already_recording) {
+        DCHECK_EQ(new_options, old_options) << "Attempting to re-enable "

[oystein (OOO til 10th of July), 2016/10/13 00:34:30]

Add a TODO to remove this (i.e. changing options run-time), if we can, and move
to a priority system instead.

[ssid, 2016/10/13 17:30:54]

Not sure I understand priority system. Added a todo.

+                                               "tracing with a different set "
+                                               "of options.";
+        trace_config_.Merge(trace_config);
+      } else {
+        trace_config_ = trace_config;
       }
-
-      DCHECK(!trace_config.event_filters().size())
-          << "Adding new filters while tracing was already enabled is not "
-             "supported.";
-
-      trace_config_.Merge(trace_config);
-      UpdateCategoryGroupEnabledFlags();
-      return;
     }
 
-    if (dispatching_to_observer_list_) {
-      DLOG(ERROR)
-          << "Cannot manipulate TraceLog::Enabled state from an observer.";
-      return;
+    // Update event filters.
+    if (modes & FILTERING_MODE) {
+      DCHECK(!trace_config.event_filters().empty())
+          << "Attempting to enable filtering without any filters";
+      DCHECK(event_filters_enabled_.empty()) << "Attempting to re-enable "
+                                                "filtering when filters are "
+                                                "already enabled.";
+
+      // Use the given event filters only if filtering was not enabled.
+      if (event_filters_enabled_.empty())
+        event_filters_enabled_ = trace_config.event_filters();
     }
+    // Keep the |trace_config_| updated with only enabled filters in case anyone
+    // tries to read it using |GetCurrentTraceConfig| (even if filters are
+    // empty).
+    trace_config_.SetEventFilterConfigs(event_filters_enabled_);
+
+    enabled_modes_ |= modes;
+    UpdateCategoryGroupEnabledFlags();
 
-    mode_ = mode;
+    // Do not notify observers or create trace buffer if only enabled for
+    // filtering or if recording was already enabled.
+    if (!(modes & RECORDING_MODE) || already_recording)
+      return;
 
     if (new_options != old_options) {
       subtle::NoBarrier_Store(&trace_options_, new_options);
@@ -775,12 +801,6 @@ void TraceLog::SetEnabled(const TraceConfig& trace_config, Mode mode) {
 
     num_traces_recorded_++;
 
-    // Clear all filters from previous tracing session. These filters are not
-    // cleared at the end of tracing because some threads which hit trace event
-    // when disabling, could try to use the filters.
-    g_category_group_filters.Get().clear();
-
-    trace_config_ = TraceConfig(trace_config);
     UpdateCategoryGroupEnabledFlags();
     UpdateSyntheticDelaysFromTraceConfig();
 
@@ -837,27 +857,44 @@ TraceConfig TraceLog::GetCurrentTraceConfig() const {
 
 void TraceLog::SetDisabled() {
   AutoLock lock(lock_);
-  SetDisabledWhileLocked();
+  SetDisabledWhileLocked(RECORDING_MODE);
 }
 
-void TraceLog::SetDisabledWhileLocked() {
+void TraceLog::SetDisabled(uint8_t modes) {
+  AutoLock lock(lock_);
+  SetDisabledWhileLocked(modes);
+}
+
+void TraceLog::SetDisabledWhileLocked(uint8_t modes) {
   lock_.AssertAcquired();
 
-  if (!IsEnabled())
+  if (!(enabled_modes_ & modes))
     return;
 
   if (dispatching_to_observer_list_) {
-    DLOG(ERROR)
+    NOTREACHED()
         << "Cannot manipulate TraceLog::Enabled state from an observer.";
     return;
   }
 
-  mode_ = DISABLED;
+  enabled_modes_ &= ~modes;
+
+  if (modes & FILTERING_MODE)
+    event_filters_enabled_.clear();
+
+  if (modes & RECORDING_MODE) {
+    trace_config_.Clear();
+
+    subtle::NoBarrier_Store(&watch_category_, 0);
+    watch_event_name_.clear();
+  }
 
-  trace_config_.Clear();
-  subtle::NoBarrier_Store(&watch_category_, 0);
-  watch_event_name_.clear();
   UpdateCategoryGroupEnabledFlags();
+
+  // Skip adding metadata events and notifying observers for filtering mode.
+  if (!(modes & RECORDING_MODE))
+    return;
+
   AddMetadataEventsWhileLocked();
 
   // Remove metadata events so they will not get added to a subsequent trace.
@@ -957,7 +994,7 @@ void TraceLog::CheckIfBufferIsFullWhileLocked() {
     if (buffer_limit_reached_timestamp_.is_null()) {
       buffer_limit_reached_timestamp_ = OffsetNow();
     }
-    SetDisabledWhileLocked();
+    SetDisabledWhileLocked(RECORDING_MODE);
   }
 }
 
@@ -1344,10 +1381,13 @@ TraceEventHandle TraceLog::AddTraceEventWithThreadIdAndTimestamp(
   TimeTicks offset_event_timestamp = OffsetTimestamp(timestamp);
   ThreadTicks thread_now = ThreadNow();
 
-  // |thread_local_event_buffer_| can be null if the current thread doesn't have
-  // a message loop or the message loop is blocked.
-  InitializeThreadLocalEventBufferIfSupported();
-  auto* thread_local_event_buffer = thread_local_event_buffer_.Get();
+  ThreadLocalEventBuffer* thread_local_event_buffer = nullptr;
+  if (enabled_modes_ & RECORDING_MODE) {
+    // |thread_local_event_buffer_| can be null if the current thread doesn't
+    // have a message loop or the message loop is blocked.
+    InitializeThreadLocalEventBufferIfSupported();
+    thread_local_event_buffer = thread_local_event_buffer_.Get();
+  }
 
   // Check and update the current thread name only if the event is for the
   // current thread to avoid locks in most cases.