Make the fuchsia mojo/public repo the source of truth.

mojo/public/js/core.js

Index: mojo/public/js/core.js
diff --git a/mojo/public/js/core.js b/mojo/public/js/core.js
deleted file mode 100644
index 424e3ecb723f2f9826b52a82624a63b59840ba27..0000000000000000000000000000000000000000
--- a/mojo/public/js/core.js
+++ /dev/null
@@ -1,239 +0,0 @@
-// Copyright 2014 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-// Module "mojo/public/js/core"
-//
-// Note: This file is for documentation purposes only. The code here is not
-// actually executed. The real module is implemented natively in Mojo.
-//
-// This module provides the JavaScript bindings for
-// mojo/public/c/include/mojo/system/*.h. Refer to those files for more detailed
-// documentation for equivalent methods.
-
-while (1);
-
-/**
- * MojoHandle: An opaque handles to a Mojo object (e.g. a message pipe).
- */
-var kInvalidHandle;
-
-/**
- * MojoResult {number}: Result codes for Mojo operations.
- * See core.h for more information.
- */
-var RESULT_OK;
-var RESULT_CANCELLED;
-var RESULT_UNKNOWN;
-var RESULT_INVALID_ARGUMENT;
-var RESULT_DEADLINE_EXCEEDED;
-var RESULT_NOT_FOUND;
-var RESULT_ALREADY_EXISTS;
-var RESULT_PERMISSION_DENIED;
-var RESULT_RESOURCE_EXHAUSTED;
-var RESULT_FAILED_PRECONDITION;
-var RESULT_ABORTED;
-var RESULT_OUT_OF_RANGE;
-var RESULT_UNIMPLEMENTED;
-var RESULT_INTERNAL;
-var RESULT_UNAVAILABLE;
-var RESULT_DATA_LOSS;
-var RESULT_BUSY;
-var RESULT_SHOULD_WAIT;
-
-/**
- * MojoDeadline {number}: Used to specify deadlines (timeouts), in microseconds.
- * See core.h for more information.
- */
-var DEADLINE_INDEFINITE;
-
-/**
- * MojoHandleSignals: Used to specify signals that can be waited on for a handle
- *(and which can be triggered), e.g., the ability to read or write to
- * the handle.
- * See core.h for more information.
- */
-var HANDLE_SIGNAL_NONE;
-var HANDLE_SIGNAL_READABLE;
-var HANDLE_SIGNAL_WRITABLE;
-var HANDLE_SIGNAL_PEER_CLOSED;
-
-/**
- * MojoCreateDataMessageOptions: Used to specify creation parameters for a data
- * pipe to |createDataMessage()|.
- * See core.h for more information.
- */
-dictionary MojoCreateDataMessageOptions {
-  MojoCreateDataMessageOptionsFlags flags;  // See below.
-};
-
-// MojoCreateDataMessageOptionsFlags
-var CREATE_MESSAGE_PIPE_OPTIONS_FLAG_NONE;
-
-/*
- * MojoWriteMessageFlags: Used to specify different modes to |writeMessage()|.
- * See core.h for more information.
- */
-var WRITE_MESSAGE_FLAG_NONE;
-
-/**
- * MojoReadMessageFlags: Used to specify different modes to |readMessage()|.
- * See core.h for more information.
- */
-var READ_MESSAGE_FLAG_NONE;
-var READ_MESSAGE_FLAG_MAY_DISCARD;
-
-/**
- * MojoCreateDataPipeOptions: Used to specify creation parameters for a data
- * pipe to |createDataPipe()|.
- * See core.h for more information.
- */
-dictionary MojoCreateDataPipeOptions {
-  MojoCreateDataPipeOptionsFlags flags;  // See below.
-  int32 elementNumBytes;  // The size of an element, in bytes.
-  int32 capacityNumBytes;  // The capacity of the data pipe, in bytes.
-};
-
-// MojoCreateDataPipeOptionsFlags
-var CREATE_DATA_PIPE_OPTIONS_FLAG_NONE;
-
-/*
- * MojoWriteDataFlags: Used to specify different modes to |writeData()|.
- * See core.h for more information.
- */
-var WRITE_DATA_FLAG_NONE;
-var WRITE_DATA_FLAG_ALL_OR_NONE;
-
-/**
- * MojoReadDataFlags: Used to specify different modes to |readData()|.
- * See core.h for more information.
- */
-var READ_DATA_FLAG_NONE;
-var READ_DATA_FLAG_ALL_OR_NONE;
-var READ_DATA_FLAG_DISCARD;
-var READ_DATA_FLAG_QUERY;
-var READ_DATA_FLAG_PEEK;
-
-/**
- * Closes the given |handle|. See MojoClose for more info.
- * @param {MojoHandle} Handle to close.
- * @return {MojoResult} Result code.
- */
-function close(handle) { [native code] }
-
-/**
- * Waits on the given handle until a signal indicated by |signals| is
- * satisfied or until |deadline| is passed. See MojoWait for more information.
- *
- * @param {MojoHandle} handle Handle to wait on.
- * @param {MojoHandleSignals} signals Specifies the condition to wait for.
- * @param {MojoDeadline} deadline Stops waiting if this is reached.
- * @return {MojoResult} Result code.
- */
-function wait(handle, signals, deadline) { [native code] }
-
-/**
- * Waits on |handles[0]|, ..., |handles[handles.length-1]| for at least one of
- * them to satisfy the state indicated by |flags[0]|, ...,
- * |flags[handles.length-1]|, respectively, or until |deadline| has passed.
- * See MojoWaitMany for more information.
- *
- * @param {Array.MojoHandle} handles Handles to wait on.
- * @param {Array.MojoHandleSignals} signals Specifies the condition to wait for,
- *   for each corresponding handle. Must be the same length as |handles|.
- * @param {MojoDeadline} deadline Stops waiting if this is reached.
- * @return {MojoResult} Result code.
- */
-function waitMany(handles, signals, deadline) { [native code] }
-
-/**
- * Creates a message pipe. This function always succeeds.
- * See MojoCreateMessagePipe for more information on message pipes.
- *
- * @param {MojoCreateMessagePipeOptions} optionsDict Options to control the
- * message pipe parameters. May be null.
- * @return {MessagePipe} An object of the form {
- *     handle0,
- *     handle1,
- *   }
- *   where |handle0| and |handle1| are MojoHandles to each end of the channel.
- */
-function createMessagePipe(optionsDict) { [native code] }
-
-/**
- * Writes a message to the message pipe endpoint given by |handle|. See
- * MojoWriteMessage for more information, including return codes.
- *
- * @param {MojoHandle} handle The endpoint to write to.
- * @param {ArrayBufferView} buffer The message data. May be empty.
- * @param {Array.MojoHandle} handlesArray Any handles to attach. Handles are
- *   transferred on success and will no longer be valid. May be empty.
- * @param {MojoWriteMessageFlags} flags Flags.
- * @return {MojoResult} Result code.
- */
-function writeMessage(handle, buffer, handlesArray, flags) { [native code] }
-
-/**
- * Reads a message from the message pipe endpoint given by |handle|. See
- * MojoReadMessage for more information, including return codes.
- *
- * @param {MojoHandle} handle The endpoint to read from.
- * @param {MojoReadMessageFlags} flags Flags.
- * @return {object} An object of the form {
- *     result,  // |RESULT_OK| on success, error code otherwise.
- *     buffer,  // An ArrayBufferView of the message data (only on success).
- *     handles  // An array of MojoHandles transferred, if any.
- *   }
- */
-function readMessage(handle, flags) { [native code] }
-
-/**
- * Creates a data pipe, which is a unidirectional communication channel for
- * unframed data, with the given options. See MojoCreateDataPipe for more
- * more information, including return codes.
- *
- * @param {MojoCreateDataPipeOptions} optionsDict Options to control the data
- *   pipe parameters. May be null.
- * @return {object} An object of the form {
- *     result,  // |RESULT_OK| on success, error code otherwise.
- *     producerHandle,  // MojoHandle to use with writeData (only on success).
- *     consumerHandle,  // MojoHandle to use with readData (only on success).
- *   }
- */
-function createDataPipe(optionsDict) { [native code] }
-
-/**
- * Writes the given data to the data pipe producer given by |handle|. See
- * MojoWriteData for more information, including return codes.
- *
- * @param {MojoHandle} handle A producerHandle returned by createDataPipe.
- * @param {ArrayBufferView} buffer The data to write.
- * @param {MojoWriteDataFlags} flags Flags.
- * @return {object} An object of the form {
- *     result,  // |RESULT_OK| on success, error code otherwise.
- *     numBytes,  // The number of bytes written.
- *   }
- */
-function writeData(handle, buffer, flags) { [native code] }
-
-/**
- * Reads data from the data pipe consumer given by |handle|. May also
- * be used to discard data. See MojoReadData for more information, including
- * return codes.
- *
- * @param {MojoHandle} handle A consumerHandle returned by createDataPipe.
- * @param {MojoReadDataFlags} flags Flags.
- * @return {object} An object of the form {
- *     result,  // |RESULT_OK| on success, error code otherwise.
- *     buffer,  // An ArrayBufferView of the data read (only on success).
- *   }
- */
-function readData(handle, flags) { [native code] }
-
-/**
- * True if the argument is a message or data pipe handle.
- *
- * @param {value} an arbitrary JS value.
- * @return true or false
- */
-function isHandle(value) { [native code] }