| OLD | NEW |
| (Empty) |
| 1 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ | |
| 2 /* This Source Code Form is subject to the terms of the Mozilla Public | |
| 3 * License, v. 2.0. If a copy of the MPL was not distributed with this | |
| 4 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ | |
| 5 | |
| 6 #ifndef prerr_h___ | |
| 7 #define prerr_h___ | |
| 8 | |
| 9 /* | |
| 10 * | |
| 11 * prerr.h | |
| 12 * This file is automatically generated; please do not edit it. | |
| 13 */ | |
| 14 | |
| 15 /* Memory allocation attempt failed */ | |
| 16 #define PR_OUT_OF_MEMORY_ERROR (-6000L) | |
| 17 | |
| 18 /* Invalid file descriptor */ | |
| 19 #define PR_BAD_DESCRIPTOR_ERROR (-5999L) | |
| 20 | |
| 21 /* The operation would have blocked */ | |
| 22 #define PR_WOULD_BLOCK_ERROR (-5998L) | |
| 23 | |
| 24 /* Invalid memory address argument */ | |
| 25 #define PR_ACCESS_FAULT_ERROR (-5997L) | |
| 26 | |
| 27 /* Invalid function for file type */ | |
| 28 #define PR_INVALID_METHOD_ERROR (-5996L) | |
| 29 | |
| 30 /* Invalid memory address argument */ | |
| 31 #define PR_ILLEGAL_ACCESS_ERROR (-5995L) | |
| 32 | |
| 33 /* Some unknown error has occurred */ | |
| 34 #define PR_UNKNOWN_ERROR (-5994L) | |
| 35 | |
| 36 /* Operation interrupted by another thread */ | |
| 37 #define PR_PENDING_INTERRUPT_ERROR (-5993L) | |
| 38 | |
| 39 /* function not implemented */ | |
| 40 #define PR_NOT_IMPLEMENTED_ERROR (-5992L) | |
| 41 | |
| 42 /* I/O function error */ | |
| 43 #define PR_IO_ERROR (-5991L) | |
| 44 | |
| 45 /* I/O operation timed out */ | |
| 46 #define PR_IO_TIMEOUT_ERROR (-5990L) | |
| 47 | |
| 48 /* I/O operation on busy file descriptor */ | |
| 49 #define PR_IO_PENDING_ERROR (-5989L) | |
| 50 | |
| 51 /* The directory could not be opened */ | |
| 52 #define PR_DIRECTORY_OPEN_ERROR (-5988L) | |
| 53 | |
| 54 /* Invalid function argument */ | |
| 55 #define PR_INVALID_ARGUMENT_ERROR (-5987L) | |
| 56 | |
| 57 /* Network address not available (in use?) */ | |
| 58 #define PR_ADDRESS_NOT_AVAILABLE_ERROR (-5986L) | |
| 59 | |
| 60 /* Network address type not supported */ | |
| 61 #define PR_ADDRESS_NOT_SUPPORTED_ERROR (-5985L) | |
| 62 | |
| 63 /* Already connected */ | |
| 64 #define PR_IS_CONNECTED_ERROR (-5984L) | |
| 65 | |
| 66 /* Network address is invalid */ | |
| 67 #define PR_BAD_ADDRESS_ERROR (-5983L) | |
| 68 | |
| 69 /* Local Network address is in use */ | |
| 70 #define PR_ADDRESS_IN_USE_ERROR (-5982L) | |
| 71 | |
| 72 /* Connection refused by peer */ | |
| 73 #define PR_CONNECT_REFUSED_ERROR (-5981L) | |
| 74 | |
| 75 /* Network address is presently unreachable */ | |
| 76 #define PR_NETWORK_UNREACHABLE_ERROR (-5980L) | |
| 77 | |
| 78 /* Connection attempt timed out */ | |
| 79 #define PR_CONNECT_TIMEOUT_ERROR (-5979L) | |
| 80 | |
| 81 /* Network file descriptor is not connected */ | |
| 82 #define PR_NOT_CONNECTED_ERROR (-5978L) | |
| 83 | |
| 84 /* Failure to load dynamic library */ | |
| 85 #define PR_LOAD_LIBRARY_ERROR (-5977L) | |
| 86 | |
| 87 /* Failure to unload dynamic library */ | |
| 88 #define PR_UNLOAD_LIBRARY_ERROR (-5976L) | |
| 89 | |
| 90 /* Symbol not found in any of the loaded dynamic libraries */ | |
| 91 #define PR_FIND_SYMBOL_ERROR (-5975L) | |
| 92 | |
| 93 /* Insufficient system resources */ | |
| 94 #define PR_INSUFFICIENT_RESOURCES_ERROR (-5974L) | |
| 95 | |
| 96 /* A directory lookup on a network address has failed */ | |
| 97 #define PR_DIRECTORY_LOOKUP_ERROR (-5973L) | |
| 98 | |
| 99 /* Attempt to access a TPD key that is out of range */ | |
| 100 #define PR_TPD_RANGE_ERROR (-5972L) | |
| 101 | |
| 102 /* Process open FD table is full */ | |
| 103 #define PR_PROC_DESC_TABLE_FULL_ERROR (-5971L) | |
| 104 | |
| 105 /* System open FD table is full */ | |
| 106 #define PR_SYS_DESC_TABLE_FULL_ERROR (-5970L) | |
| 107 | |
| 108 /* Network operation attempted on non-network file descriptor */ | |
| 109 #define PR_NOT_SOCKET_ERROR (-5969L) | |
| 110 | |
| 111 /* TCP-specific function attempted on a non-TCP file descriptor */ | |
| 112 #define PR_NOT_TCP_SOCKET_ERROR (-5968L) | |
| 113 | |
| 114 /* TCP file descriptor is already bound */ | |
| 115 #define PR_SOCKET_ADDRESS_IS_BOUND_ERROR (-5967L) | |
| 116 | |
| 117 /* Access Denied */ | |
| 118 #define PR_NO_ACCESS_RIGHTS_ERROR (-5966L) | |
| 119 | |
| 120 /* The requested operation is not supported by the platform */ | |
| 121 #define PR_OPERATION_NOT_SUPPORTED_ERROR (-5965L) | |
| 122 | |
| 123 /* The host operating system does not support the protocol requested */ | |
| 124 #define PR_PROTOCOL_NOT_SUPPORTED_ERROR (-5964L) | |
| 125 | |
| 126 /* Access to the remote file has been severed */ | |
| 127 #define PR_REMOTE_FILE_ERROR (-5963L) | |
| 128 | |
| 129 /* The value requested is too large to be stored in the data buffer provided */ | |
| 130 #define PR_BUFFER_OVERFLOW_ERROR (-5962L) | |
| 131 | |
| 132 /* TCP connection reset by peer */ | |
| 133 #define PR_CONNECT_RESET_ERROR (-5961L) | |
| 134 | |
| 135 /* Unused */ | |
| 136 #define PR_RANGE_ERROR (-5960L) | |
| 137 | |
| 138 /* The operation would have deadlocked */ | |
| 139 #define PR_DEADLOCK_ERROR (-5959L) | |
| 140 | |
| 141 /* The file is already locked */ | |
| 142 #define PR_FILE_IS_LOCKED_ERROR (-5958L) | |
| 143 | |
| 144 /* Write would result in file larger than the system allows */ | |
| 145 #define PR_FILE_TOO_BIG_ERROR (-5957L) | |
| 146 | |
| 147 /* The device for storing the file is full */ | |
| 148 #define PR_NO_DEVICE_SPACE_ERROR (-5956L) | |
| 149 | |
| 150 /* Unused */ | |
| 151 #define PR_PIPE_ERROR (-5955L) | |
| 152 | |
| 153 /* Unused */ | |
| 154 #define PR_NO_SEEK_DEVICE_ERROR (-5954L) | |
| 155 | |
| 156 /* Cannot perform a normal file operation on a directory */ | |
| 157 #define PR_IS_DIRECTORY_ERROR (-5953L) | |
| 158 | |
| 159 /* Symbolic link loop */ | |
| 160 #define PR_LOOP_ERROR (-5952L) | |
| 161 | |
| 162 /* File name is too long */ | |
| 163 #define PR_NAME_TOO_LONG_ERROR (-5951L) | |
| 164 | |
| 165 /* File not found */ | |
| 166 #define PR_FILE_NOT_FOUND_ERROR (-5950L) | |
| 167 | |
| 168 /* Cannot perform directory operation on a normal file */ | |
| 169 #define PR_NOT_DIRECTORY_ERROR (-5949L) | |
| 170 | |
| 171 /* Cannot write to a read-only file system */ | |
| 172 #define PR_READ_ONLY_FILESYSTEM_ERROR (-5948L) | |
| 173 | |
| 174 /* Cannot delete a directory that is not empty */ | |
| 175 #define PR_DIRECTORY_NOT_EMPTY_ERROR (-5947L) | |
| 176 | |
| 177 /* Cannot delete or rename a file object while the file system is busy */ | |
| 178 #define PR_FILESYSTEM_MOUNTED_ERROR (-5946L) | |
| 179 | |
| 180 /* Cannot rename a file to a file system on another device */ | |
| 181 #define PR_NOT_SAME_DEVICE_ERROR (-5945L) | |
| 182 | |
| 183 /* The directory object in the file system is corrupted */ | |
| 184 #define PR_DIRECTORY_CORRUPTED_ERROR (-5944L) | |
| 185 | |
| 186 /* Cannot create or rename a filename that already exists */ | |
| 187 #define PR_FILE_EXISTS_ERROR (-5943L) | |
| 188 | |
| 189 /* Directory is full. No additional filenames may be added */ | |
| 190 #define PR_MAX_DIRECTORY_ENTRIES_ERROR (-5942L) | |
| 191 | |
| 192 /* The required device was in an invalid state */ | |
| 193 #define PR_INVALID_DEVICE_STATE_ERROR (-5941L) | |
| 194 | |
| 195 /* The device is locked */ | |
| 196 #define PR_DEVICE_IS_LOCKED_ERROR (-5940L) | |
| 197 | |
| 198 /* No more entries in the directory */ | |
| 199 #define PR_NO_MORE_FILES_ERROR (-5939L) | |
| 200 | |
| 201 /* Encountered end of file */ | |
| 202 #define PR_END_OF_FILE_ERROR (-5938L) | |
| 203 | |
| 204 /* Seek error */ | |
| 205 #define PR_FILE_SEEK_ERROR (-5937L) | |
| 206 | |
| 207 /* The file is busy */ | |
| 208 #define PR_FILE_IS_BUSY_ERROR (-5936L) | |
| 209 | |
| 210 /* The I/O operation was aborted */ | |
| 211 #define PR_OPERATION_ABORTED_ERROR (-5935L) | |
| 212 | |
| 213 /* Operation is still in progress (probably a non-blocking connect) */ | |
| 214 #define PR_IN_PROGRESS_ERROR (-5934L) | |
| 215 | |
| 216 /* Operation has already been initiated (probably a non-blocking connect) */ | |
| 217 #define PR_ALREADY_INITIATED_ERROR (-5933L) | |
| 218 | |
| 219 /* The wait group is empty */ | |
| 220 #define PR_GROUP_EMPTY_ERROR (-5932L) | |
| 221 | |
| 222 /* Object state improper for request */ | |
| 223 #define PR_INVALID_STATE_ERROR (-5931L) | |
| 224 | |
| 225 /* Network is down */ | |
| 226 #define PR_NETWORK_DOWN_ERROR (-5930L) | |
| 227 | |
| 228 /* Socket shutdown */ | |
| 229 #define PR_SOCKET_SHUTDOWN_ERROR (-5929L) | |
| 230 | |
| 231 /* Connection aborted */ | |
| 232 #define PR_CONNECT_ABORTED_ERROR (-5928L) | |
| 233 | |
| 234 /* Host is unreachable */ | |
| 235 #define PR_HOST_UNREACHABLE_ERROR (-5927L) | |
| 236 | |
| 237 /* The library is not loaded */ | |
| 238 #define PR_LIBRARY_NOT_LOADED_ERROR (-5926L) | |
| 239 | |
| 240 /* The one-time function was previously called and failed. Its error code is no
longer available */ | |
| 241 #define PR_CALL_ONCE_ERROR (-5925L) | |
| 242 | |
| 243 /* Placeholder for the end of the list */ | |
| 244 #define PR_MAX_ERROR (-5924L) | |
| 245 | |
| 246 extern void nspr_InitializePRErrorTable(void); | |
| 247 #define ERROR_TABLE_BASE_nspr (-6000L) | |
| 248 | |
| 249 #endif /* prerr_h___ */ | |
| OLD | NEW |