Substituting legacy protocol with uWeave protocol

components/proximity_auth/ble/bluetooth_low_energy_weave_client_connection.h

 // Copyright 2015 The Chromium Authors. All rights reserved.
 // Use of this source code is governed by a BSD-style license that can be
 // found in the LICENSE file.
 
-#ifndef COMPONENTS_PROXIMITY_AUTH_BLE_BLUETOOTH_LOW_ENERGY_CONNECTION_H_
-#define COMPONENTS_PROXIMITY_AUTH_BLE_BLUETOOTH_LOW_ENERGY_CONNECTION_H_
+#ifndef COMPONENTS_PROXIMITY_AUTH_BLE_BLUETOOTH_LOW_ENERGY_WEAVE_CLIENT_CONNECTION_H_
+#define COMPONENTS_PROXIMITY_AUTH_BLE_BLUETOOTH_LOW_ENERGY_WEAVE_CLIENT_CONNECTION_H_
 
 #include <stddef.h>
 #include <stdint.h>
 
+#include <map>
 #include <memory>
 #include <queue>
 #include <string>
 
 #include "base/macros.h"
 #include "base/memory/ref_counted.h"
 #include "base/memory/weak_ptr.h"
 #include "base/time/time.h"
 #include "components/proximity_auth/ble/bluetooth_low_energy_characteristics_finder.h"
+#include "components/proximity_auth/ble/bluetooth_low_energy_weave_packet_generator.h"
+#include "components/proximity_auth/ble/bluetooth_low_energy_weave_packet_receiver.h"
 #include "components/proximity_auth/ble/fake_wire_message.h"
 #include "components/proximity_auth/ble/remote_attribute.h"
 #include "components/proximity_auth/connection.h"
 #include "device/bluetooth/bluetooth_adapter.h"
 #include "device/bluetooth/bluetooth_device.h"
 #include "device/bluetooth/bluetooth_gatt_notify_session.h"
 #include "device/bluetooth/bluetooth_remote_gatt_characteristic.h"
 #include "device/bluetooth/bluetooth_uuid.h"
 
 namespace base {
 class TaskRunner;
 }
 
 namespace proximity_auth {
-
 class BluetoothThrottler;
 
-// Represents a connection with a remote device over Bluetooth low energy. The
-// connection is a persistent bidirectional channel for sending and receiving
-// wire messages. The remote device is the peripheral mode and the service
-// contains two characteristics: one to send data and another to receive it.
-//
-// The connection flow is described below.
-//
-//          Discover Reader and Writer Characteristics
-//                              |
-//                              |
-//                              |
-//                    Start Notify Session
-//                              |
-//                              |
-//                              |
-//     Write kInviteToConnectSignal to Writer Characteristic
-//                              |
-//                              |
-//                              |
-//    Read kInvitationResponseSignal from Reader Characteristic
-//                              |
-//                              |
-//                              |
-//           Proximity Auth Connection Established
-class BluetoothLowEnergyConnection : public Connection,
-                                     public device::BluetoothAdapter::Observer {
+namespace weave {
+// Creates GATT connection on top of the BLE connection and act as a Client.
+// uWeave communication follows the flow:
+// Client                           | Server
+// ---------------------------------|--------------------------------
+// send connection request          |
+//                                  | receive connection request
+//                                  | send connection response
+// receive connection response      |
+// opt: send data                   | opt: send data
+// receive data                     | receive data
+// opt: close connection            | opt: close connection
+class BluetoothLowEnergyWeaveClientConnection
+    : public Connection,
+      public device::BluetoothAdapter::Observer {
  public:
-  // Signals sent to the remote device to indicate connection related events.
-  enum class ControlSignal : uint32_t {
-    kInviteToConnectSignal = 0,
-    kInvitationResponseSignal = 1,
-    kSendSignal = 2,
-    kDisconnectSignal = 3,
+  class Factory {
+   public:
+    static std::unique_ptr<BluetoothLowEnergyWeaveClientConnection>
+    NewInstance();
+
+    // Exposed for testing.
+    static void SetInstanceForTesting(Factory* factory);
+
+   protected:
+    // Exposed for testing.
+    virtual std::unique_ptr<BluetoothLowEnergyWeaveClientConnection>
+    BuildInstance();
+
+   private:
+    static Factory* factory_instance_;
   };
 
-  // The sub-state of a proximity_auth::BluetoothLowEnergyConnection class
+  // The sub-state of a proximity_auth::BluetoothLowEnergyWeaveClientConnection
   // extends the IN_PROGRESS state of proximity_auth::Connection::Status.
-  enum class SubStatus {
+  enum SubStatus {
     DISCONNECTED,
     WAITING_GATT_CONNECTION,
     WAITING_CHARACTERISTICS,
     CHARACTERISTICS_FOUND,
     WAITING_NOTIFY_SESSION,
     NOTIFY_SESSION_READY,
-    WAITING_RESPONSE_SIGNAL,
+    WAITING_CONNECTION_RESPONSE,
     CONNECTED,
   };
 
   // Constructs a Bluetooth low energy connection to the service with
   // |remote_service_| on the |remote_device|. The |adapter| must be already
-  // initaalized and ready. The GATT connection may alreaady be established and
+  // initialized and ready. The GATT connection may alreaady be established and
   // pass through |gatt_connection|. A subsequent call to Connect() must be
   // made.
-  BluetoothLowEnergyConnection(
+  BluetoothLowEnergyWeaveClientConnection(
       const RemoteDevice& remote_device,
       scoped_refptr<device::BluetoothAdapter> adapter,
       const device::BluetoothUUID remote_service_uuid,
       BluetoothThrottler* bluetooth_throttler,
       int max_number_of_write_attempts);
 
-  ~BluetoothLowEnergyConnection() override;
+  ~BluetoothLowEnergyWeaveClientConnection() override;
 
   // proximity_auth::Connection:
   void Connect() override;
   void Disconnect() override;
   std::string GetDeviceAddress() override;
 
  protected:
   // Exposed for testing.
+  void DestroyConnection();
+
+  // Exposed for testing.
   void SetSubStatus(SubStatus status);
   SubStatus sub_status() { return sub_status_; }
 
   // Sets |task_runner_| for testing.
   void SetTaskRunnerForTesting(scoped_refptr<base::TaskRunner> task_runner);
 
   // Virtual for testing.
   virtual BluetoothLowEnergyCharacteristicsFinder* CreateCharacteristicsFinder(
       const BluetoothLowEnergyCharacteristicsFinder::SuccessCallback&
           success_callback,
       const BluetoothLowEnergyCharacteristicsFinder::ErrorCallback&
           error_callback);
 
   // proximity_auth::Connection:
   void SendMessageImpl(std::unique_ptr<WireMessage> message) override;
 
   // device::BluetoothAdapter::Observer:
   void DeviceChanged(device::BluetoothAdapter* adapter,
                      device::BluetoothDevice* device) override;
   void DeviceRemoved(device::BluetoothAdapter* adapter,
                      device::BluetoothDevice* device) override;
   void GattCharacteristicValueChanged(
       device::BluetoothAdapter* adapter,
       device::BluetoothRemoteGattCharacteristic* characteristic,
-      const std::vector<uint8_t>& value) override;
+      const Packet& value) override;
 
  private:
+  enum WriteRequestType { REGULAR, MESSAGE_COMPLETE, CONNECTION_CLOSE };
+
   // Represents a request to write |value| to a some characteristic.
   // |is_last_write_for_wire_messsage| indicates whether this request
   // corresponds to the last write request for some wire message.
-  // A WireMessage corresponds to exactly two WriteRequest: the first containing
-  // a kSendSignal + the size of the WireMessage, and the second containing a
-  // SendStatusSignal + the serialized WireMessage.
   struct WriteRequest {
-    WriteRequest(const std::vector<uint8_t>& val, bool flag);
+    WriteRequest(const Packet& val,
+                 WriteRequestType request_type,
+                 int message_counter);
+    WriteRequest(const Packet& val, WriteRequestType request_type);
     WriteRequest(const WriteRequest& other);
     ~WriteRequest();
 
-    std::vector<uint8_t> value;
-    bool is_last_write_for_wire_message;
+    Packet value;
+    WriteRequestType request_type;
+    int message_counter;
     int number_of_failed_attempts;
   };
 
   // Creates the GATT connection with |remote_device|.
   void CreateGattConnection();
 
   // Called when a GATT connection is created.
   void OnGattConnectionCreated(
       std::unique_ptr<device::BluetoothGattConnection> gatt_connection);
 
   // Callback called when there is an error creating the GATT connection.
   void OnCreateGattConnectionError(
       device::BluetoothDevice::ConnectErrorCode error_code);
 
-  // Callback called when |to_peripheral_char_| and |from_peripheral_char_| were
+  // Callback called when |tx_characteristic_| and |rx_characteristic_| were
   // found.
   void OnCharacteristicsFound(const RemoteAttribute& service,
-                              const RemoteAttribute& to_peripheral_char,
-                              const RemoteAttribute& from_peripheral_char);
+                              const RemoteAttribute& tx_characteristic,
+                              const RemoteAttribute& rx_characteristic);
 
   // Callback called there was an error finding the characteristics.
-  void OnCharacteristicsFinderError(
-      const RemoteAttribute& to_peripheral_char,
-      const RemoteAttribute& from_peripheral_char);
+  void OnCharacteristicsFinderError(const RemoteAttribute& tx_characteristic,
+                                    const RemoteAttribute& rx_characteristic);
 
-  // Starts a notify session for |from_peripheral_char_| when ready
+  // Starts a notify session for |rx_characteristic_| when ready
   // (SubStatus::CHARACTERISTICS_FOUND).
   void StartNotifySession();
 
   // Called when a notification session is successfully started for
-  // |from_peripheral_char_| characteristic.
+  // |rx_characteristic_| characteristic.
   void OnNotifySessionStarted(
       std::unique_ptr<device::BluetoothGattNotifySession> notify_session);
 
   // Called when there is an error starting a notification session for
-  // |from_peripheral_char_| characteristic.
+  // |rx_characteristic_| characteristic.
   void OnNotifySessionError(device::BluetoothGattService::GattErrorCode);
 
   // Stops |notify_session_|.
   void StopNotifySession();
 
-  // Sends an invite to connect signal to the peripheral if when ready
+  // Sends a connection request to server if ready
   // (SubStatus::NOTIFY_SESSION_READY).
-  void SendInviteToConnectSignal();
+  void SendConnectionRequest();
 
   // Completes and updates the status accordingly.
   void CompleteConnection();
 
   // This is the only entry point for WriteRequests, which are processed
   // accordingly the following flow:
   // 1) |request| is enqueued;
   // 2) |request| will be processed by ProcessNextWriteRequest() when there is
   // no pending write request;
   // 3) |request| will be dequeued when it's successfully processed
   // (OnRemoteCharacteristicWritten());
   // 4) |request| is not dequeued if it fails
   // (OnWriteRemoteCharacteristicError()), it remains on the queue and will be
   // retried. |request| will remain on the queue until it succeeds or it
   // triggers a Disconnect() call (after |max_number_of_tries_|).
-  void WriteRemoteCharacteristic(WriteRequest request);
+  void WriteRemoteCharacteristic(const WriteRequest& request);
 
   // Processes the next request in |write_requests_queue_|.
   void ProcessNextWriteRequest();
 
   // Called when the
   // BluetoothRemoteGattCharacteristic::RemoteCharacteristicWrite() is
   // successfully complete.
-  void OnRemoteCharacteristicWritten(bool run_did_send_message_callback);
+  void OnRemoteCharacteristicWritten(WriteRequestType request_type,
+                                     int message_counter);
 
   // Called when there is an error writing to the remote characteristic
-  // |to_peripheral_char_|.
+  // |tx_characteristic_|.
   void OnWriteRemoteCharacteristicError(
-      bool run_did_send_message_callback,
+      WriteRequestType request_type,
+      int message_counter,
       device::BluetoothRemoteGattService::GattErrorCode error);
 
-  // Builds the value to be written on |to_peripheral_char_|. The value
-  // corresponds to |signal| concatenated with |payload|.
-  WriteRequest BuildWriteRequest(const std::vector<uint8_t>& signal,
-                                 const std::vector<uint8_t>& bytes,
-                                 bool is_last_message_for_wire_message);
+  void OnPacketReceiverError();
 
   // Prints the time elapsed since |Connect()| was called.
   void PrintTimeElapsed();
 
   // Returns the device corresponding to |remote_device_address_|.
   device::BluetoothDevice* GetRemoteDevice();
 
   // Returns the service corresponding to |remote_service_| in the current
   // device.
   device::BluetoothRemoteGattService* GetRemoteService();
 
   // Returns the characteristic corresponding to |identifier| in the current
   // service.
   device::BluetoothRemoteGattCharacteristic* GetGattCharacteristic(
       const std::string& identifier);
 
-  // Convert the first 4 bytes from a byte vector to a uint32_t.
-  uint32_t ToUint32(const std::vector<uint8_t>& bytes);
-
-  // Convert an uint32_t to a byte vector.
-  const std::vector<uint8_t> ToByteVector(uint32_t value);
+  // Get the reason that the other side of the connection decided to close the
+  // connection.
+  // Will crash if the receiver is not in CONNECTION_CLOSED state.
+  std::string GetReasonForClose();
 
   // The Bluetooth adapter over which the Bluetooth connection will be made.
   scoped_refptr<device::BluetoothAdapter> adapter_;
 
   // Remote service the |gatt_connection_| was established with.
   RemoteAttribute remote_service_;
 
+  // uWeave packet generator.
+  std::unique_ptr<BluetoothLowEnergyWeavePacketGenerator> packet_generator_;
+
+  // uWeave packet receiver.
+  std::unique_ptr<BluetoothLowEnergyWeavePacketReceiver> packet_receiver_;
+
   // Characteristic used to send data to the remote device.
-  RemoteAttribute to_peripheral_char_;
+  RemoteAttribute tx_characteristic_;
 
   // Characteristic used to receive data from the remote device.
-  RemoteAttribute from_peripheral_char_;
+  RemoteAttribute rx_characteristic_;
 
   // Throttles repeated connection attempts to the same device. This is a
   // workaround for crbug.com/508919. Not owned, must outlive this instance.
   BluetoothThrottler* bluetooth_throttler_;
 
   scoped_refptr<base::TaskRunner> task_runner_;
 
   // The GATT connection with the remote device.
   std::unique_ptr<device::BluetoothGattConnection> gatt_connection_;
 
   // The characteristics finder for remote device.
   std::unique_ptr<BluetoothLowEnergyCharacteristicsFinder>
       characteristic_finder_;
 
-  // The notify session for |from_peripheral_char|.
+  // The notify session for |rx_characteristic|.
   std::unique_ptr<device::BluetoothGattNotifySession> notify_session_;
 
   // Internal connection status
   SubStatus sub_status_;
 
-  // Indicates a receiving operation is in progress. This is set after a
-  // ControlSignal::kSendSignal was received from the remote device.
-  bool receiving_bytes_;
-
-  // Total number of bytes expected for the current receive operation.
-  std::size_t expected_number_of_incoming_bytes_;
-
   // Bytes already received for the current receive operation.
   std::string incoming_bytes_buffer_;
 
   // Indicates there is a
   // BluetoothRemoteGattCharacteristic::WriteRemoteCharacteristic
   // operation pending.
   bool write_remote_characteristic_pending_;
 
   std::queue<WriteRequest> write_requests_queue_;
 
+  // Counter indicate which message the packet is from.

[Kyle Horimoto, 2016/07/12 01:03:15]

s/indicate/indicating/

[jingxuy, 2016/07/15 18:24:59]

Done.

+  int message_counter_;

[Kyle Horimoto, 2016/07/12 01:03:15]

next_message_counter_to_use_

[jingxuy, 2016/07/15 18:24:59]

Done.

+
+  // Map of the message_counter_ to it's corresponding message.
+  std::map<int, std::unique_ptr<WireMessage>> map_to_message_;
+
   // Maximum number of tries to send any write request.
   int max_number_of_write_attempts_;
 
-  // Maximum number of bytes that fit in a single chunk to be written in
-  // |to_peripheral_char_|. Ideally, this should be the maximum value the
-  // peripheral supports and it should be agreed when the GATT connection is
-  // created. Currently, there is no API to find this value. The implementation
-  // uses a hard-coded constant.
-  int max_chunk_size_;
-
   // Stores when the instace was created.
   base::TimeTicks start_time_;
 
-  base::WeakPtrFactory<BluetoothLowEnergyConnection> weak_ptr_factory_;
+  base::WeakPtrFactory<BluetoothLowEnergyWeaveClientConnection>
+      weak_ptr_factory_;
 
-  DISALLOW_COPY_AND_ASSIGN(BluetoothLowEnergyConnection);
+  DISALLOW_COPY_AND_ASSIGN(BluetoothLowEnergyWeaveClientConnection);
 };
 
+}  // namespace weave
+
 }  // namespace proximity_auth
 
-#endif  // COMPONENTS_PROXIMITY_AUTH_BLE_BLUETOOTH_LOW_ENERGY_CONNECTION_H_
+#endif  // COMPONENTS_PROXIMITY_AUTH_BLE_BLUETOOTH_LOW_ENERGY_WEAVE_CLIENT_CONNECTION_H_