Delete bundled copy of OpenSSL and replace with README.

openssl/crypto/sha/asm/sha512-ppc.pl

Index: openssl/crypto/sha/asm/sha512-ppc.pl
diff --git a/openssl/crypto/sha/asm/sha512-ppc.pl b/openssl/crypto/sha/asm/sha512-ppc.pl
deleted file mode 100644
index 6b44a68e599e5fcc59876e9be9af73cb1f54094d..0000000000000000000000000000000000000000
--- a/openssl/crypto/sha/asm/sha512-ppc.pl
+++ /dev/null
@@ -1,460 +0,0 @@
-#!/usr/bin/env perl
-
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-# I let hardware handle unaligned input, except on page boundaries
-# (see below for details). Otherwise straightforward implementation
-# with X vector in register bank. The module is big-endian [which is
-# not big deal as there're no little-endian targets left around].
-
-#			sha256		|	sha512
-# 			-m64	-m32	|	-m64	-m32
-# --------------------------------------+-----------------------
-# PPC970,gcc-4.0.0	+50%	+38%	|	+40%	+410%(*)
-# Power6,xlc-7		+150%	+90%	|	+100%	+430%(*)
-#
-# (*)	64-bit code in 32-bit application context, which actually is
-#	on TODO list. It should be noted that for safe deployment in
-#	32-bit *mutli-threaded* context asyncronous signals should be
-#	blocked upon entry to SHA512 block routine. This is because
-#	32-bit signaling procedure invalidates upper halves of GPRs.
-#	Context switch procedure preserves them, but not signaling:-(
-
-# Second version is true multi-thread safe. Trouble with the original
-# version was that it was using thread local storage pointer register.
-# Well, it scrupulously preserved it, but the problem would arise the
-# moment asynchronous signal was delivered and signal handler would
-# dereference the TLS pointer. While it's never the case in openssl
-# application or test suite, we have to respect this scenario and not
-# use TLS pointer register. Alternative would be to require caller to
-# block signals prior calling this routine. For the record, in 32-bit
-# context R2 serves as TLS pointer, while in 64-bit context - R13.
-
-$flavour=shift;
-$output =shift;
-
-if ($flavour =~ /64/) {
-	$SIZE_T=8;
-	$LRSAVE=2*$SIZE_T;
-	$STU="stdu";
-	$UCMP="cmpld";
-	$SHL="sldi";
-	$POP="ld";
-	$PUSH="std";
-} elsif ($flavour =~ /32/) {
-	$SIZE_T=4;
-	$LRSAVE=$SIZE_T;
-	$STU="stwu";
-	$UCMP="cmplw";
-	$SHL="slwi";
-	$POP="lwz";
-	$PUSH="stw";
-} else { die "nonsense $flavour"; }
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
-( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
-die "can't locate ppc-xlate.pl";
-
-open STDOUT,"| $^X $xlate $flavour $output" || die "can't call $xlate: $!";
-
-if ($output =~ /512/) {
-	$func="sha512_block_data_order";
-	$SZ=8;
-	@Sigma0=(28,34,39);
-	@Sigma1=(14,18,41);
-	@sigma0=(1,  8, 7);
-	@sigma1=(19,61, 6);
-	$rounds=80;
-	$LD="ld";
-	$ST="std";
-	$ROR="rotrdi";
-	$SHR="srdi";
-} else {
-	$func="sha256_block_data_order";
-	$SZ=4;
-	@Sigma0=( 2,13,22);
-	@Sigma1=( 6,11,25);
-	@sigma0=( 7,18, 3);
-	@sigma1=(17,19,10);
-	$rounds=64;
-	$LD="lwz";
-	$ST="stw";
-	$ROR="rotrwi";
-	$SHR="srwi";
-}
-
-$FRAME=32*$SIZE_T+16*$SZ;
-$LOCALS=6*$SIZE_T;
-
-$sp ="r1";
-$toc="r2";
-$ctx="r3";	# zapped by $a0
-$inp="r4";	# zapped by $a1
-$num="r5";	# zapped by $t0
-
-$T  ="r0";
-$a0 ="r3";
-$a1 ="r4";
-$t0 ="r5";
-$t1 ="r6";
-$Tbl="r7";
-
-$A  ="r8";
-$B  ="r9";
-$C  ="r10";
-$D  ="r11";
-$E  ="r12";
-$F  ="r13";	$F="r2" if ($SIZE_T==8);# reassigned to exempt TLS pointer
-$G  ="r14";
-$H  ="r15";
-
-@V=($A,$B,$C,$D,$E,$F,$G,$H);
-@X=("r16","r17","r18","r19","r20","r21","r22","r23",
-    "r24","r25","r26","r27","r28","r29","r30","r31");
-
-$inp="r31";	# reassigned $inp! aliases with @X[15]
-
-sub ROUND_00_15 {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
-$code.=<<___;
-	$LD	$T,`$i*$SZ`($Tbl)
-	$ROR	$a0,$e,$Sigma1[0]
-	$ROR	$a1,$e,$Sigma1[1]
-	and	$t0,$f,$e
-	andc	$t1,$g,$e
-	add	$T,$T,$h
-	xor	$a0,$a0,$a1
-	$ROR	$a1,$a1,`$Sigma1[2]-$Sigma1[1]`
-	or	$t0,$t0,$t1		; Ch(e,f,g)
-	add	$T,$T,@X[$i]
-	xor	$a0,$a0,$a1		; Sigma1(e)
-	add	$T,$T,$t0
-	add	$T,$T,$a0
-
-	$ROR	$a0,$a,$Sigma0[0]
-	$ROR	$a1,$a,$Sigma0[1]
-	and	$t0,$a,$b
-	and	$t1,$a,$c
-	xor	$a0,$a0,$a1
-	$ROR	$a1,$a1,`$Sigma0[2]-$Sigma0[1]`
-	xor	$t0,$t0,$t1
-	and	$t1,$b,$c
-	xor	$a0,$a0,$a1		; Sigma0(a)
-	add	$d,$d,$T
-	xor	$t0,$t0,$t1		; Maj(a,b,c)
-	add	$h,$T,$a0
-	add	$h,$h,$t0
-
-___
-}
-
-sub ROUND_16_xx {
-my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
-$i-=16;
-$code.=<<___;
-	$ROR	$a0,@X[($i+1)%16],$sigma0[0]
-	$ROR	$a1,@X[($i+1)%16],$sigma0[1]
-	$ROR	$t0,@X[($i+14)%16],$sigma1[0]
-	$ROR	$t1,@X[($i+14)%16],$sigma1[1]
-	xor	$a0,$a0,$a1
-	$SHR	$a1,@X[($i+1)%16],$sigma0[2]
-	xor	$t0,$t0,$t1
-	$SHR	$t1,@X[($i+14)%16],$sigma1[2]
-	add	@X[$i],@X[$i],@X[($i+9)%16]
-	xor	$a0,$a0,$a1		; sigma0(X[(i+1)&0x0f])
-	xor	$t0,$t0,$t1		; sigma1(X[(i+14)&0x0f])
-	add	@X[$i],@X[$i],$a0
-	add	@X[$i],@X[$i],$t0
-___
-&ROUND_00_15($i,$a,$b,$c,$d,$e,$f,$g,$h);
-}
-
-$code=<<___;
-.machine	"any"
-.text
-
-.globl	$func
-.align	6
-$func:
-	$STU	$sp,-$FRAME($sp)
-	mflr	r0
-	$SHL	$num,$num,`log(16*$SZ)/log(2)`
-
-	$PUSH	$ctx,`$FRAME-$SIZE_T*22`($sp)
-
-	$PUSH	$toc,`$FRAME-$SIZE_T*20`($sp)
-	$PUSH	r13,`$FRAME-$SIZE_T*19`($sp)
-	$PUSH	r14,`$FRAME-$SIZE_T*18`($sp)
-	$PUSH	r15,`$FRAME-$SIZE_T*17`($sp)
-	$PUSH	r16,`$FRAME-$SIZE_T*16`($sp)
-	$PUSH	r17,`$FRAME-$SIZE_T*15`($sp)
-	$PUSH	r18,`$FRAME-$SIZE_T*14`($sp)
-	$PUSH	r19,`$FRAME-$SIZE_T*13`($sp)
-	$PUSH	r20,`$FRAME-$SIZE_T*12`($sp)
-	$PUSH	r21,`$FRAME-$SIZE_T*11`($sp)
-	$PUSH	r22,`$FRAME-$SIZE_T*10`($sp)
-	$PUSH	r23,`$FRAME-$SIZE_T*9`($sp)
-	$PUSH	r24,`$FRAME-$SIZE_T*8`($sp)
-	$PUSH	r25,`$FRAME-$SIZE_T*7`($sp)
-	$PUSH	r26,`$FRAME-$SIZE_T*6`($sp)
-	$PUSH	r27,`$FRAME-$SIZE_T*5`($sp)
-	$PUSH	r28,`$FRAME-$SIZE_T*4`($sp)
-	$PUSH	r29,`$FRAME-$SIZE_T*3`($sp)
-	$PUSH	r30,`$FRAME-$SIZE_T*2`($sp)
-	$PUSH	r31,`$FRAME-$SIZE_T*1`($sp)
-	$PUSH	r0,`$FRAME+$LRSAVE`($sp)
-
-	$LD	$A,`0*$SZ`($ctx)
-	mr	$inp,r4				; incarnate $inp
-	$LD	$B,`1*$SZ`($ctx)
-	$LD	$C,`2*$SZ`($ctx)
-	$LD	$D,`3*$SZ`($ctx)
-	$LD	$E,`4*$SZ`($ctx)
-	$LD	$F,`5*$SZ`($ctx)
-	$LD	$G,`6*$SZ`($ctx)
-	$LD	$H,`7*$SZ`($ctx)
-
-	bl	LPICmeup
-LPICedup:
-	andi.	r0,$inp,3
-	bne	Lunaligned
-Laligned:
-	add	$num,$inp,$num
-	$PUSH	$num,`$FRAME-$SIZE_T*24`($sp)	; end pointer
-	$PUSH	$inp,`$FRAME-$SIZE_T*23`($sp)	; inp pointer
-	bl	Lsha2_block_private
-	b	Ldone
-
-; PowerPC specification allows an implementation to be ill-behaved
-; upon unaligned access which crosses page boundary. "Better safe
-; than sorry" principle makes me treat it specially. But I don't
-; look for particular offending word, but rather for the input
-; block which crosses the boundary. Once found that block is aligned
-; and hashed separately...
-.align	4
-Lunaligned:
-	subfic	$t1,$inp,4096
-	andi.	$t1,$t1,`4096-16*$SZ`	; distance to closest page boundary
-	beq	Lcross_page
-	$UCMP	$num,$t1
-	ble-	Laligned		; didn't cross the page boundary
-	subfc	$num,$t1,$num
-	add	$t1,$inp,$t1
-	$PUSH	$num,`$FRAME-$SIZE_T*25`($sp)	; save real remaining num
-	$PUSH	$t1,`$FRAME-$SIZE_T*24`($sp)	; intermediate end pointer
-	$PUSH	$inp,`$FRAME-$SIZE_T*23`($sp)	; inp pointer
-	bl	Lsha2_block_private
-	; $inp equals to the intermediate end pointer here
-	$POP	$num,`$FRAME-$SIZE_T*25`($sp)	; restore real remaining num
-Lcross_page:
-	li	$t1,`16*$SZ/4`
-	mtctr	$t1
-	addi	r20,$sp,$LOCALS			; aligned spot below the frame
-Lmemcpy:
-	lbz	r16,0($inp)
-	lbz	r17,1($inp)
-	lbz	r18,2($inp)
-	lbz	r19,3($inp)
-	addi	$inp,$inp,4
-	stb	r16,0(r20)
-	stb	r17,1(r20)
-	stb	r18,2(r20)
-	stb	r19,3(r20)
-	addi	r20,r20,4
-	bdnz	Lmemcpy
-
-	$PUSH	$inp,`$FRAME-$SIZE_T*26`($sp)	; save real inp
-	addi	$t1,$sp,`$LOCALS+16*$SZ`	; fictitious end pointer
-	addi	$inp,$sp,$LOCALS		; fictitious inp pointer
-	$PUSH	$num,`$FRAME-$SIZE_T*25`($sp)	; save real num
-	$PUSH	$t1,`$FRAME-$SIZE_T*24`($sp)	; end pointer
-	$PUSH	$inp,`$FRAME-$SIZE_T*23`($sp)	; inp pointer
-	bl	Lsha2_block_private
-	$POP	$inp,`$FRAME-$SIZE_T*26`($sp)	; restore real inp
-	$POP	$num,`$FRAME-$SIZE_T*25`($sp)	; restore real num
-	addic.	$num,$num,`-16*$SZ`		; num--
-	bne-	Lunaligned
-
-Ldone:
-	$POP	r0,`$FRAME+$LRSAVE`($sp)
-	$POP	$toc,`$FRAME-$SIZE_T*20`($sp)
-	$POP	r13,`$FRAME-$SIZE_T*19`($sp)
-	$POP	r14,`$FRAME-$SIZE_T*18`($sp)
-	$POP	r15,`$FRAME-$SIZE_T*17`($sp)
-	$POP	r16,`$FRAME-$SIZE_T*16`($sp)
-	$POP	r17,`$FRAME-$SIZE_T*15`($sp)
-	$POP	r18,`$FRAME-$SIZE_T*14`($sp)
-	$POP	r19,`$FRAME-$SIZE_T*13`($sp)
-	$POP	r20,`$FRAME-$SIZE_T*12`($sp)
-	$POP	r21,`$FRAME-$SIZE_T*11`($sp)
-	$POP	r22,`$FRAME-$SIZE_T*10`($sp)
-	$POP	r23,`$FRAME-$SIZE_T*9`($sp)
-	$POP	r24,`$FRAME-$SIZE_T*8`($sp)
-	$POP	r25,`$FRAME-$SIZE_T*7`($sp)
-	$POP	r26,`$FRAME-$SIZE_T*6`($sp)
-	$POP	r27,`$FRAME-$SIZE_T*5`($sp)
-	$POP	r28,`$FRAME-$SIZE_T*4`($sp)
-	$POP	r29,`$FRAME-$SIZE_T*3`($sp)
-	$POP	r30,`$FRAME-$SIZE_T*2`($sp)
-	$POP	r31,`$FRAME-$SIZE_T*1`($sp)
-	mtlr	r0
-	addi	$sp,$sp,$FRAME
-	blr
-	.long	0
-	.byte	0,12,4,1,0x80,18,3,0
-	.long	0
-
-.align	4
-Lsha2_block_private:
-___
-for($i=0;$i<16;$i++) {
-$code.=<<___ if ($SZ==4);
-	lwz	@X[$i],`$i*$SZ`($inp)
-___
-# 64-bit loads are split to 2x32-bit ones, as CPU can't handle
-# unaligned 64-bit loads, only 32-bit ones...
-$code.=<<___ if ($SZ==8);
-	lwz	$t0,`$i*$SZ`($inp)
-	lwz	@X[$i],`$i*$SZ+4`($inp)
-	insrdi	@X[$i],$t0,32,0
-___
-	&ROUND_00_15($i,@V);
-	unshift(@V,pop(@V));
-}
-$code.=<<___;
-	li	$T,`$rounds/16-1`
-	mtctr	$T
-.align	4
-Lrounds:
-	addi	$Tbl,$Tbl,`16*$SZ`
-___
-for(;$i<32;$i++) {
-	&ROUND_16_xx($i,@V);
-	unshift(@V,pop(@V));
-}
-$code.=<<___;
-	bdnz-	Lrounds
-
-	$POP	$ctx,`$FRAME-$SIZE_T*22`($sp)
-	$POP	$inp,`$FRAME-$SIZE_T*23`($sp)	; inp pointer
-	$POP	$num,`$FRAME-$SIZE_T*24`($sp)	; end pointer
-	subi	$Tbl,$Tbl,`($rounds-16)*$SZ`	; rewind Tbl
-
-	$LD	r16,`0*$SZ`($ctx)
-	$LD	r17,`1*$SZ`($ctx)
-	$LD	r18,`2*$SZ`($ctx)
-	$LD	r19,`3*$SZ`($ctx)
-	$LD	r20,`4*$SZ`($ctx)
-	$LD	r21,`5*$SZ`($ctx)
-	$LD	r22,`6*$SZ`($ctx)
-	addi	$inp,$inp,`16*$SZ`		; advance inp
-	$LD	r23,`7*$SZ`($ctx)
-	add	$A,$A,r16
-	add	$B,$B,r17
-	$PUSH	$inp,`$FRAME-$SIZE_T*23`($sp)
-	add	$C,$C,r18
-	$ST	$A,`0*$SZ`($ctx)
-	add	$D,$D,r19
-	$ST	$B,`1*$SZ`($ctx)
-	add	$E,$E,r20
-	$ST	$C,`2*$SZ`($ctx)
-	add	$F,$F,r21
-	$ST	$D,`3*$SZ`($ctx)
-	add	$G,$G,r22
-	$ST	$E,`4*$SZ`($ctx)
-	add	$H,$H,r23
-	$ST	$F,`5*$SZ`($ctx)
-	$ST	$G,`6*$SZ`($ctx)
-	$UCMP	$inp,$num
-	$ST	$H,`7*$SZ`($ctx)
-	bne	Lsha2_block_private
-	blr
-	.long	0
-	.byte	0,12,0x14,0,0,0,0,0
-___
-
-# Ugly hack here, because PPC assembler syntax seem to vary too
-# much from platforms to platform...
-$code.=<<___;
-.align	6
-LPICmeup:
-	mflr	r0
-	bcl	20,31,\$+4
-	mflr	$Tbl	; vvvvvv "distance" between . and 1st data entry
-	addi	$Tbl,$Tbl,`64-8`
-	mtlr	r0
-	blr
-	.long	0
-	.byte	0,12,0x14,0,0,0,0,0
-	.space	`64-9*4`
-___
-$code.=<<___ if ($SZ==8);
-	.long	0x428a2f98,0xd728ae22,0x71374491,0x23ef65cd
-	.long	0xb5c0fbcf,0xec4d3b2f,0xe9b5dba5,0x8189dbbc
-	.long	0x3956c25b,0xf348b538,0x59f111f1,0xb605d019
-	.long	0x923f82a4,0xaf194f9b,0xab1c5ed5,0xda6d8118
-	.long	0xd807aa98,0xa3030242,0x12835b01,0x45706fbe
-	.long	0x243185be,0x4ee4b28c,0x550c7dc3,0xd5ffb4e2
-	.long	0x72be5d74,0xf27b896f,0x80deb1fe,0x3b1696b1
-	.long	0x9bdc06a7,0x25c71235,0xc19bf174,0xcf692694
-	.long	0xe49b69c1,0x9ef14ad2,0xefbe4786,0x384f25e3
-	.long	0x0fc19dc6,0x8b8cd5b5,0x240ca1cc,0x77ac9c65
-	.long	0x2de92c6f,0x592b0275,0x4a7484aa,0x6ea6e483
-	.long	0x5cb0a9dc,0xbd41fbd4,0x76f988da,0x831153b5
-	.long	0x983e5152,0xee66dfab,0xa831c66d,0x2db43210
-	.long	0xb00327c8,0x98fb213f,0xbf597fc7,0xbeef0ee4
-	.long	0xc6e00bf3,0x3da88fc2,0xd5a79147,0x930aa725
-	.long	0x06ca6351,0xe003826f,0x14292967,0x0a0e6e70
-	.long	0x27b70a85,0x46d22ffc,0x2e1b2138,0x5c26c926
-	.long	0x4d2c6dfc,0x5ac42aed,0x53380d13,0x9d95b3df
-	.long	0x650a7354,0x8baf63de,0x766a0abb,0x3c77b2a8
-	.long	0x81c2c92e,0x47edaee6,0x92722c85,0x1482353b
-	.long	0xa2bfe8a1,0x4cf10364,0xa81a664b,0xbc423001
-	.long	0xc24b8b70,0xd0f89791,0xc76c51a3,0x0654be30
-	.long	0xd192e819,0xd6ef5218,0xd6990624,0x5565a910
-	.long	0xf40e3585,0x5771202a,0x106aa070,0x32bbd1b8
-	.long	0x19a4c116,0xb8d2d0c8,0x1e376c08,0x5141ab53
-	.long	0x2748774c,0xdf8eeb99,0x34b0bcb5,0xe19b48a8
-	.long	0x391c0cb3,0xc5c95a63,0x4ed8aa4a,0xe3418acb
-	.long	0x5b9cca4f,0x7763e373,0x682e6ff3,0xd6b2b8a3
-	.long	0x748f82ee,0x5defb2fc,0x78a5636f,0x43172f60
-	.long	0x84c87814,0xa1f0ab72,0x8cc70208,0x1a6439ec
-	.long	0x90befffa,0x23631e28,0xa4506ceb,0xde82bde9
-	.long	0xbef9a3f7,0xb2c67915,0xc67178f2,0xe372532b
-	.long	0xca273ece,0xea26619c,0xd186b8c7,0x21c0c207
-	.long	0xeada7dd6,0xcde0eb1e,0xf57d4f7f,0xee6ed178
-	.long	0x06f067aa,0x72176fba,0x0a637dc5,0xa2c898a6
-	.long	0x113f9804,0xbef90dae,0x1b710b35,0x131c471b
-	.long	0x28db77f5,0x23047d84,0x32caab7b,0x40c72493
-	.long	0x3c9ebe0a,0x15c9bebc,0x431d67c4,0x9c100d4c
-	.long	0x4cc5d4be,0xcb3e42b6,0x597f299c,0xfc657e2a
-	.long	0x5fcb6fab,0x3ad6faec,0x6c44198c,0x4a475817
-___
-$code.=<<___ if ($SZ==4);
-	.long	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
-	.long	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
-	.long	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
-	.long	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
-	.long	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
-	.long	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
-	.long	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
-	.long	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
-	.long	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
-	.long	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
-	.long	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
-	.long	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
-	.long	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
-	.long	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
-	.long	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
-	.long	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
-___
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-print $code;
-close STDOUT;