Delete bundled copy of OpenSSL and replace with README.

openssl/crypto/sha/asm/sha256-586.pl

Index: openssl/crypto/sha/asm/sha256-586.pl
diff --git a/openssl/crypto/sha/asm/sha256-586.pl b/openssl/crypto/sha/asm/sha256-586.pl
deleted file mode 100644
index 52a7c7f8a3b72eba5d4ab227f11c5c368d310acf..0000000000000000000000000000000000000000
--- a/openssl/crypto/sha/asm/sha256-586.pl
+++ /dev/null
@@ -1,249 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# SHA256 block transform for x86. September 2007.
-#
-# Performance in clock cycles per processed byte (less is better):
-#
-#		Pentium	PIII	P4	AMD K8	Core2
-# gcc		46	36	41	27	26
-# icc		57	33	38	25	23	
-# x86 asm	40	30	33	20	18
-# x86_64 asm(*)	-	-	21	16	16
-#
-# (*) x86_64 assembler performance is presented for reference
-#     purposes.
-#
-# Performance improvement over compiler generated code varies from
-# 10% to 40% [see above]. Not very impressive on some µ-archs, but
-# it's 5 times smaller and optimizies amount of writes.
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"sha512-586.pl",$ARGV[$#ARGV] eq "386");
-
-$A="eax";
-$E="edx";
-$T="ebx";
-$Aoff=&DWP(0,"esp");
-$Boff=&DWP(4,"esp");
-$Coff=&DWP(8,"esp");
-$Doff=&DWP(12,"esp");
-$Eoff=&DWP(16,"esp");
-$Foff=&DWP(20,"esp");
-$Goff=&DWP(24,"esp");
-$Hoff=&DWP(28,"esp");
-$Xoff=&DWP(32,"esp");
-$K256="ebp";
-
-sub BODY_00_15() {
-    my $in_16_63=shift;
-
-	&mov	("ecx",$E);
-	 &add	($T,"edi")			if ($in_16_63);	# T += sigma1(X[-2])
-	&ror	("ecx",25-11);
-	 &mov	("esi",$Foff);
-	&xor	("ecx",$E);
-	&ror	("ecx",11-6);
-	 &mov	(&DWP(4*(8+15),"esp"),$T)	if ($in_16_63);	# save X[0]
-	&xor	("ecx",$E);
-	&ror	("ecx",6);	# Sigma1(e)
-	 &mov	("edi",$Goff);
-	&add	($T,"ecx");	# T += Sigma1(e)
-
-	&xor	("esi","edi");
-	 &mov	($Eoff,$E);	# modulo-scheduled
-	 &mov	("ecx",$A);
-	&and	("esi",$E);
-	 &mov	($E,$Doff);	# e becomes d, which is e in next iteration
-	&xor	("esi","edi");	# Ch(e,f,g)
-	 &mov	("edi",$A);
-	&add	($T,"esi");	# T += Ch(e,f,g)
-
-	&ror	("ecx",22-13);
-	 &add	($T,$Hoff);	# T += h
-	&xor	("ecx",$A);
-	&ror	("ecx",13-2);
-	 &mov	("esi",$Boff);
-	&xor	("ecx",$A);
-	&ror	("ecx",2);	# Sigma0(a)
-	 &add	($E,$T);	# d += T
-	 &mov	("edi",$Coff);
-
-	&add	($T,"ecx");	# T += Sigma0(a)
-	 &mov	($Aoff,$A);	# modulo-scheduled
-
-	&mov	("ecx",$A);
-	 &sub	("esp",4);
-	&or	($A,"esi");	# a becomes h, which is a in next iteration
-	&and	("ecx","esi");
-	&and	($A,"edi");
-	 &mov	("esi",&DWP(0,$K256));
-	&or	($A,"ecx");	# h=Maj(a,b,c)
-
-	&add	($K256,4);
-	&add	($A,$T);	# h += T
-	 &mov	($T,&DWP(4*(8+15+16-1),"esp"))	if ($in_16_63);	# preload T
-	&add	($E,"esi");	# d += K256[i]
-	&add	($A,"esi");	# h += K256[i]
-}
-
-&function_begin("sha256_block_data_order");
-	&mov	("esi",wparam(0));	# ctx
-	&mov	("edi",wparam(1));	# inp
-	&mov	("eax",wparam(2));	# num
-	&mov	("ebx","esp");		# saved sp
-
-	&call	(&label("pic_point"));	# make it PIC!
-&set_label("pic_point");
-	&blindpop($K256);
-	&lea	($K256,&DWP(&label("K256")."-".&label("pic_point"),$K256));
-
-	&sub	("esp",16);
-	&and	("esp",-64);
-
-	&shl	("eax",6);
-	&add	("eax","edi");
-	&mov	(&DWP(0,"esp"),"esi");	# ctx
-	&mov	(&DWP(4,"esp"),"edi");	# inp
-	&mov	(&DWP(8,"esp"),"eax");	# inp+num*128
-	&mov	(&DWP(12,"esp"),"ebx");	# saved sp
-
-&set_label("loop",16);
-    # copy input block to stack reversing byte and dword order
-    for($i=0;$i<4;$i++) {
-	&mov	("eax",&DWP($i*16+0,"edi"));
-	&mov	("ebx",&DWP($i*16+4,"edi"));
-	&mov	("ecx",&DWP($i*16+8,"edi"));
-	&mov	("edx",&DWP($i*16+12,"edi"));
-	&bswap	("eax");
-	&bswap	("ebx");
-	&bswap	("ecx");
-	&bswap	("edx");
-	&push	("eax");
-	&push	("ebx");
-	&push	("ecx");
-	&push	("edx");
-    }
-	&add	("edi",64);
-	&sub	("esp",4*8);		# place for A,B,C,D,E,F,G,H
-	&mov	(&DWP(4*(8+16)+4,"esp"),"edi");
-
-	# copy ctx->h[0-7] to A,B,C,D,E,F,G,H on stack
-	&mov	($A,&DWP(0,"esi"));
-	&mov	("ebx",&DWP(4,"esi"));
-	&mov	("ecx",&DWP(8,"esi"));
-	&mov	("edi",&DWP(12,"esi"));
-	# &mov	($Aoff,$A);
-	&mov	($Boff,"ebx");
-	&mov	($Coff,"ecx");
-	&mov	($Doff,"edi");
-	&mov	($E,&DWP(16,"esi"));	
-	&mov	("ebx",&DWP(20,"esi"));
-	&mov	("ecx",&DWP(24,"esi"));
-	&mov	("edi",&DWP(28,"esi"));
-	# &mov	($Eoff,$E);
-	&mov	($Foff,"ebx");
-	&mov	($Goff,"ecx");
-	&mov	($Hoff,"edi");
-
-&set_label("00_15",16);
-	&mov	($T,&DWP(4*(8+15),"esp"));
-
-	&BODY_00_15();
-
-	&cmp	("esi",0xc19bf174);
-	&jne	(&label("00_15"));
-
-	&mov	($T,&DWP(4*(8+15+16-1),"esp"));	# preloaded in BODY_00_15(1)
-&set_label("16_63",16);
-	&mov	("esi",$T);
-	 &mov	("ecx",&DWP(4*(8+15+16-14),"esp"));
-	&ror	("esi",18-7);
-	 &mov	("edi","ecx");
-	&xor	("esi",$T);
-	&ror	("esi",7);
-	&shr	($T,3);
-
-	&ror	("edi",19-17);
-	 &xor	($T,"esi");			# T = sigma0(X[-15])
-	&xor	("edi","ecx");
-	&ror	("edi",17);
-	&shr	("ecx",10);
-	 &add	($T,&DWP(4*(8+15+16),"esp"));	# T += X[-16]
-	&xor	("edi","ecx");			# sigma1(X[-2])
-
-	 &add	($T,&DWP(4*(8+15+16-9),"esp"));	# T += X[-7]
-	# &add	($T,"edi");			# T += sigma1(X[-2])
-	# &mov	(&DWP(4*(8+15),"esp"),$T);	# save X[0]
-
-	&BODY_00_15(1);
-
-	&cmp	("esi",0xc67178f2);
-	&jne	(&label("16_63"));
-
-	&mov	("esi",&DWP(4*(8+16+64)+0,"esp"));#ctx
-	# &mov	($A,$Aoff);
-	&mov	("ebx",$Boff);
-	&mov	("ecx",$Coff);
-	&mov	("edi",$Doff);
-	&add	($A,&DWP(0,"esi"));
-	&add	("ebx",&DWP(4,"esi"));
-	&add	("ecx",&DWP(8,"esi"));
-	&add	("edi",&DWP(12,"esi"));
-	&mov	(&DWP(0,"esi"),$A);
-	&mov	(&DWP(4,"esi"),"ebx");
-	&mov	(&DWP(8,"esi"),"ecx");
-	&mov	(&DWP(12,"esi"),"edi");
-	# &mov	($E,$Eoff);
-	&mov	("eax",$Foff);
-	&mov	("ebx",$Goff);
-	&mov	("ecx",$Hoff);
-	&mov	("edi",&DWP(4*(8+16+64)+4,"esp"));#inp
-	&add	($E,&DWP(16,"esi"));
-	&add	("eax",&DWP(20,"esi"));
-	&add	("ebx",&DWP(24,"esi"));
-	&add	("ecx",&DWP(28,"esi"));
-	&mov	(&DWP(16,"esi"),$E);
-	&mov	(&DWP(20,"esi"),"eax");
-	&mov	(&DWP(24,"esi"),"ebx");
-	&mov	(&DWP(28,"esi"),"ecx");
-
-	&add	("esp",4*(8+16+64));		# destroy frame
-	&sub	($K256,4*64);			# rewind K
-
-	&cmp	("edi",&DWP(8,"esp"));		# are we done yet?
-	&jb	(&label("loop"));
-
-	&mov	("esp",&DWP(12,"esp"));		# restore sp
-&function_end_A();
-
-&set_label("K256",64);	# Yes! I keep it in the code segment!
-	&data_word(0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5);
-	&data_word(0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5);
-	&data_word(0xd807aa98,0x12835b01,0x243185be,0x550c7dc3);
-	&data_word(0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174);
-	&data_word(0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc);
-	&data_word(0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da);
-	&data_word(0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7);
-	&data_word(0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967);
-	&data_word(0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13);
-	&data_word(0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85);
-	&data_word(0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3);
-	&data_word(0xd192e819,0xd6990624,0xf40e3585,0x106aa070);
-	&data_word(0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5);
-	&data_word(0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3);
-	&data_word(0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208);
-	&data_word(0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2);
-&function_end_B("sha256_block_data_order");
-&asciz("SHA256 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>");
-
-&asm_finish();