Delete bundled copy of OpenSSL and replace with README.

openssl/crypto/bn/asm/via-mont.pl

Index: openssl/crypto/bn/asm/via-mont.pl
diff --git a/openssl/crypto/bn/asm/via-mont.pl b/openssl/crypto/bn/asm/via-mont.pl
deleted file mode 100644
index c046a514c873fb9e773384b635ac066883f5e565..0000000000000000000000000000000000000000
--- a/openssl/crypto/bn/asm/via-mont.pl
+++ /dev/null
@@ -1,242 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-#
-# Wrapper around 'rep montmul', VIA-specific instruction accessing
-# PadLock Montgomery Multiplier. The wrapper is designed as drop-in
-# replacement for OpenSSL bn_mul_mont [first implemented in 0.9.9].
-#
-# Below are interleaved outputs from 'openssl speed rsa dsa' for 4
-# different software configurations on 1.5GHz VIA Esther processor.
-# Lines marked with "software integer" denote performance of hand-
-# coded integer-only assembler found in OpenSSL 0.9.7. "Software SSE2"
-# refers to hand-coded SSE2 Montgomery multiplication procedure found
-# OpenSSL 0.9.9. "Hardware VIA SDK" refers to padlock_pmm routine from
-# Padlock SDK 2.0.1 available for download from VIA, which naturally
-# utilizes the magic 'repz montmul' instruction. And finally "hardware
-# this" refers to *this* implementation which also uses 'repz montmul'
-#
-#                   sign    verify    sign/s verify/s
-# rsa  512 bits 0.001720s 0.000140s    581.4   7149.7	software integer
-# rsa  512 bits 0.000690s 0.000086s   1450.3  11606.0	software SSE2
-# rsa  512 bits 0.006136s 0.000201s    163.0   4974.5	hardware VIA SDK
-# rsa  512 bits 0.000712s 0.000050s   1404.9  19858.5	hardware this
-#
-# rsa 1024 bits 0.008518s 0.000413s    117.4   2420.8	software integer
-# rsa 1024 bits 0.004275s 0.000277s    233.9   3609.7	software SSE2
-# rsa 1024 bits 0.012136s 0.000260s     82.4   3844.5	hardware VIA SDK
-# rsa 1024 bits 0.002522s 0.000116s    396.5   8650.9	hardware this
-#
-# rsa 2048 bits 0.050101s 0.001371s     20.0    729.6	software integer
-# rsa 2048 bits 0.030273s 0.001008s     33.0    991.9	software SSE2
-# rsa 2048 bits 0.030833s 0.000976s     32.4   1025.1	hardware VIA SDK
-# rsa 2048 bits 0.011879s 0.000342s     84.2   2921.7	hardware this
-#
-# rsa 4096 bits 0.327097s 0.004859s      3.1    205.8	software integer
-# rsa 4096 bits 0.229318s 0.003859s      4.4    259.2	software SSE2
-# rsa 4096 bits 0.233953s 0.003274s      4.3    305.4	hardware VIA SDK
-# rsa 4096 bits 0.070493s 0.001166s     14.2    857.6	hardware this
-#
-# dsa  512 bits 0.001342s 0.001651s    745.2    605.7	software integer
-# dsa  512 bits 0.000844s 0.000987s   1185.3   1013.1	software SSE2
-# dsa  512 bits 0.001902s 0.002247s    525.6    444.9	hardware VIA SDK
-# dsa  512 bits 0.000458s 0.000524s   2182.2   1909.1	hardware this
-#
-# dsa 1024 bits 0.003964s 0.004926s    252.3    203.0	software integer
-# dsa 1024 bits 0.002686s 0.003166s    372.3    315.8	software SSE2
-# dsa 1024 bits 0.002397s 0.002823s    417.1    354.3	hardware VIA SDK
-# dsa 1024 bits 0.000978s 0.001170s   1022.2    855.0	hardware this
-#
-# dsa 2048 bits 0.013280s 0.016518s     75.3     60.5	software integer
-# dsa 2048 bits 0.009911s 0.011522s    100.9     86.8	software SSE2
-# dsa 2048 bits 0.009542s 0.011763s    104.8     85.0	hardware VIA SDK
-# dsa 2048 bits 0.002884s 0.003352s    346.8    298.3	hardware this
-#
-# To give you some other reference point here is output for 2.4GHz P4
-# running hand-coded SSE2 bn_mul_mont found in 0.9.9, i.e. "software
-# SSE2" in above terms.
-#
-# rsa  512 bits 0.000407s 0.000047s   2454.2  21137.0
-# rsa 1024 bits 0.002426s 0.000141s    412.1   7100.0
-# rsa 2048 bits 0.015046s 0.000491s     66.5   2034.9
-# rsa 4096 bits 0.109770s 0.002379s      9.1    420.3
-# dsa  512 bits 0.000438s 0.000525s   2281.1   1904.1
-# dsa 1024 bits 0.001346s 0.001595s    742.7    627.0
-# dsa 2048 bits 0.004745s 0.005582s    210.7    179.1
-#
-# Conclusions: 
-# - VIA SDK leaves a *lot* of room for improvement (which this
-#   implementation successfully fills:-);
-# - 'rep montmul' gives up to >3x performance improvement depending on
-#   key length;
-# - in terms of absolute performance it delivers approximately as much
-#   as modern out-of-order 32-bit cores [again, for longer keys].
-
-$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
-push(@INC,"${dir}","${dir}../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"via-mont.pl");
-
-# int bn_mul_mont(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp, const BN_ULONG *np,const BN_ULONG *n0, int num);
-$func="bn_mul_mont_padlock";
-
-$pad=16*1;	# amount of reserved bytes on top of every vector
-
-# stack layout
-$mZeroPrime=&DWP(0,"esp");		# these are specified by VIA
-$A=&DWP(4,"esp");
-$B=&DWP(8,"esp");
-$T=&DWP(12,"esp");
-$M=&DWP(16,"esp");
-$scratch=&DWP(20,"esp");
-$rp=&DWP(24,"esp");			# these are mine
-$sp=&DWP(28,"esp");
-# &DWP(32,"esp")			# 32 byte scratch area
-# &DWP(64+(4*$num+$pad)*0,"esp")	# padded tp[num]
-# &DWP(64+(4*$num+$pad)*1,"esp")	# padded copy of ap[num]
-# &DWP(64+(4*$num+$pad)*2,"esp")	# padded copy of bp[num]
-# &DWP(64+(4*$num+$pad)*3,"esp")	# padded copy of np[num]
-# Note that SDK suggests to unconditionally allocate 2K per vector. This
-# has quite an impact on performance. It naturally depends on key length,
-# but to give an example 1024 bit private RSA key operations suffer >30%
-# penalty. I allocate only as much as actually required...
-
-&function_begin($func);
-	&xor	("eax","eax");
-	&mov	("ecx",&wparam(5));	# num
-	# meet VIA's limitations for num [note that the specification
-	# expresses them in bits, while we work with amount of 32-bit words]
-	&test	("ecx",3);
-	&jnz	(&label("leave"));	# num % 4 != 0
-	&cmp	("ecx",8);
-	&jb	(&label("leave"));	# num < 8
-	&cmp	("ecx",1024);
-	&ja	(&label("leave"));	# num > 1024
-
-	&pushf	();
-	&cld	();
-
-	&mov	("edi",&wparam(0));	# rp
-	&mov	("eax",&wparam(1));	# ap
-	&mov	("ebx",&wparam(2));	# bp
-	&mov	("edx",&wparam(3));	# np
-	&mov	("esi",&wparam(4));	# n0
-	&mov	("esi",&DWP(0,"esi"));	# *n0
-
-	&lea	("ecx",&DWP($pad,"","ecx",4));	# ecx becomes vector size in bytes
-	&lea	("ebp",&DWP(64,"","ecx",4));	# allocate 4 vectors + 64 bytes
-	&neg	("ebp");
-	&add	("ebp","esp");
-	&and	("ebp",-64);		# align to cache-line
-	&xchg	("ebp","esp");		# alloca
-
-	&mov	($rp,"edi");		# save rp
-	&mov	($sp,"ebp");		# save esp
-
-	&mov	($mZeroPrime,"esi");
-	&lea	("esi",&DWP(64,"esp"));	# tp
-	&mov	($T,"esi");
-	&lea	("edi",&DWP(32,"esp"));	# scratch area
-	&mov	($scratch,"edi");
-	&mov	("esi","eax");
-
-	&lea	("ebp",&DWP(-$pad,"ecx"));
-	&shr	("ebp",2);		# restore original num value in ebp
-
-	&xor	("eax","eax");
-
-	&mov	("ecx","ebp");
-	&lea	("ecx",&DWP((32+$pad)/4,"ecx"));# padded tp + scratch
-	&data_byte(0xf3,0xab);		# rep stosl, bzero
-
-	&mov	("ecx","ebp");
-	&lea	("edi",&DWP(64+$pad,"esp","ecx",4));# pointer to ap copy
-	&mov	($A,"edi");
-	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
-	&mov	("ecx",$pad/4);
-	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
-	# edi points at the end of padded ap copy...
-
-	&mov	("ecx","ebp");
-	&mov	("esi","ebx");
-	&mov	($B,"edi");
-	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
-	&mov	("ecx",$pad/4);
-	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
-	# edi points at the end of padded bp copy...
-
-	&mov	("ecx","ebp");
-	&mov	("esi","edx");
-	&mov	($M,"edi");
-	&data_byte(0xf3,0xa5);		# rep movsl, memcpy
-	&mov	("ecx",$pad/4);
-	&data_byte(0xf3,0xab);		# rep stosl, bzero pad
-	# edi points at the end of padded np copy...
-
-	# let magic happen...
-	&mov	("ecx","ebp");
-	&mov	("esi","esp");
-	&shl	("ecx",5);		# convert word counter to bit counter
-	&align	(4);
-	&data_byte(0xf3,0x0f,0xa6,0xc0);# rep montmul
-
-	&mov	("ecx","ebp");
-	&lea	("esi",&DWP(64,"esp"));		# tp
-	# edi still points at the end of padded np copy...
-	&neg	("ebp");
-	&lea	("ebp",&DWP(-$pad,"edi","ebp",4));	# so just "rewind"
-	&mov	("edi",$rp);			# restore rp
-	&xor	("edx","edx");			# i=0 and clear CF
-
-&set_label("sub",8);
-	&mov	("eax",&DWP(0,"esi","edx",4));
-	&sbb	("eax",&DWP(0,"ebp","edx",4));
-	&mov	(&DWP(0,"edi","edx",4),"eax");	# rp[i]=tp[i]-np[i]
-	&lea	("edx",&DWP(1,"edx"));		# i++
-	&loop	(&label("sub"));		# doesn't affect CF!
-
-	&mov	("eax",&DWP(0,"esi","edx",4));	# upmost overflow bit
-	&sbb	("eax",0);
-	&and	("esi","eax");
-	&not	("eax");
-	&mov	("ebp","edi");
-	&and	("ebp","eax");
-	&or	("esi","ebp");			# tp=carry?tp:rp
-
-	&mov	("ecx","edx");			# num
-	&xor	("edx","edx");			# i=0
-
-&set_label("copy",8);
-	&mov	("eax",&DWP(0,"esi","edx",4));
-	&mov	(&DWP(64,"esp","edx",4),"ecx");	# zap tp
-	&mov	(&DWP(0,"edi","edx",4),"eax");
-	&lea	("edx",&DWP(1,"edx"));		# i++
-	&loop	(&label("copy"));
-
-	&mov	("ebp",$sp);
-	&xor	("eax","eax");
-
-	&mov	("ecx",64/4);
-	&mov	("edi","esp");		# zap frame including scratch area
-	&data_byte(0xf3,0xab);		# rep stosl, bzero
-
-	# zap copies of ap, bp and np
-	&lea	("edi",&DWP(64+$pad,"esp","edx",4));# pointer to ap
-	&lea	("ecx",&DWP(3*$pad/4,"edx","edx",2));
-	&data_byte(0xf3,0xab);		# rep stosl, bzero
-
-	&mov	("esp","ebp");
-	&inc	("eax");		# signal "done"
-	&popf	();
-&set_label("leave");
-&function_end($func);
-
-&asciz("Padlock Montgomery Multiplication, CRYPTOGAMS by <appro\@openssl.org>");
-
-&asm_finish();