Version 1.8 of gecko-sdk. Downloaded from here:...

gecko-sdk/include/prcountr.h

Index: gecko-sdk/include/prcountr.h
===================================================================
--- gecko-sdk/include/prcountr.h	(revision 0)
+++ gecko-sdk/include/prcountr.h	(revision 0)
@@ -0,0 +1,557 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef prcountr_h___
+#define prcountr_h___
+
+/*----------------------------------------------------------------------------
+** prcountr.h -- NSPR Instrumentation counters
+**
+** The NSPR Counter Feature provides a means to "count
+** something." Counters can be dynamically defined, incremented,
+** decremented, set, and deleted under application program
+** control.
+** 																                   
+** The Counter Feature is intended to be used as instrumentation,                  
+** not as operational data. If you need a counter for operational                  
+** data, use native integral types.                                                
+** 																                   
+** Counters are 32bit unsigned intergers. On overflow, a counter                   
+** will wrap. No exception is recognized or reported.                              
+**                                                                                 
+** A counter can be dynamically created using a two level naming
+** convention. A "handle" is returned when the counter is
+** created. The counter can subsequently be addressed by its
+** handle. An API is provided to get an existing counter's handle
+** given the names with  which it was originally created. 
+** Similarly, a counter's name can be retrieved given its handle.
+** 
+** The counter naming convention is a two-level hierarchy. The
+** QName is the higher level of the hierarchy; RName is the
+** lower level. RNames can be thought of as existing within a
+** QName. The same RName can exist within multiple QNames. QNames
+** are unique. The NSPR Counter is not a near-zero overhead
+** feature. Application designers should be aware of 
+** serialization issues when using the Counter API. Creating a
+** counter locks a large asset, potentially causing a stall. This
+** suggest that applications should create counters at component
+** initialization, for example, and not create and destroy them
+** willy-nilly. ... You have been warned.
+** 
+** Incrementing and Adding to counters uses atomic operations.
+** The performance of these operations will vary from platform
+** to platform. On platforms where atomic operations are not
+** supported the overhead may be substantial.
+** 
+** When traversing the counter database with FindNext functions,
+** the instantaneous values of any given counter is that at the
+** moment of extraction. The state of the entire counter database
+** may not be viewed as atomic.
+** 
+** The counter interface may be disabled (No-Op'd) at compile
+** time. When DEBUG is defined at compile time, the Counter
+** Feature is compiled into NSPR and applications invoking it.
+** When DEBUG is not defined, the counter macros compile to
+** nothing. To force the Counter Feature to be compiled into an
+** optimized build, define FORCE_NSPR_COUNTERS at compile time
+** for both NSPR and the application intending to use it.
+** 
+** Application designers should use the macro form of the Counter
+** Feature methods to minimize performance impact in optimized
+** builds. The macros normally compile to nothing on optimized
+** builds.
+** 
+** Application designers should be aware of the effects of
+** debug and optimized build differences when using result of the
+** Counter Feature macros in expressions.
+** 
+** The Counter Feature is thread-safe and SMP safe.
+** 
+** /lth. 09-Jun-1998.
+*/
+
+#include "prtypes.h"
+
+PR_BEGIN_EXTERN_C
+
+/*
+** Opaque counter handle type.
+** ... don't even think of looking in here.
+**
+*/
+typedef void *  PRCounterHandle;
+
+#define PRCOUNTER_NAME_MAX 31
+#define PRCOUNTER_DESC_MAX 255
+
+
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_DEFINE_COUNTER() -- Define a PRCounterHandle
+** 
+** DESCRIPTION: PR_DEFINE_COUNTER() is used to define a counter
+** handle.
+** 
+*/
+#define PR_DEFINE_COUNTER(name) PRCounterHandle name
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_INIT_COUNTER_HANDLE() -- Set the value of a PRCounterHandle
+** 
+** DESCRIPTION: 
+** PR_INIT_COUNTER_HANDLE() sets the value of a PRCounterHandle
+** to value.
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_INIT_COUNTER_HANDLE(handle,value)\
+    (handle) = (PRCounterHandle)(value)
+#else
+#define PR_INIT_COUNTER_HANDLE(handle,value)
+#endif
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_CreateCounter() -- Create a counter
+** 
+** DESCRIPTION: PR_CreateCounter() creates a counter object and
+** initializes it to zero.
+** 
+** The macro form takes as its first argument the name of the
+** PRCounterHandle to receive the handle returned from
+** PR_CreateCounter().
+** 
+** INPUTS:
+**  qName: The QName for the counter object. The maximum length
+** of qName is defined by PRCOUNTER_NAME_MAX
+** 
+**  rName: The RName for the counter object. The maximum length
+** of qName is defined by PRCOUNTER_NAME_MAX
+** 
+**  descrioption: The description of the counter object. The
+** maximum length of description is defined by
+** PRCOUNTER_DESC_MAX.
+** 
+** OUTPUTS:
+** 
+** RETURNS:
+**  PRCounterHandle.
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_CREATE_COUNTER(handle,qName,rName,description)\
+   (handle) = PR_CreateCounter((qName),(rName),(description))
+#else
+#define PR_CREATE_COUNTER(handle,qName,rName,description)
+#endif
+
+NSPR_API(PRCounterHandle) 
+	PR_CreateCounter( 
+		const char *qName, 
+    	const char *rName, 
+        const char *description 
+);
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_DestroyCounter() -- Destroy a counter object.
+** 
+** DESCRIPTION: PR_DestroyCounter() removes a counter and
+** unregisters its handle from the counter database.
+** 
+** INPUTS:
+**  handle: the PRCounterHandle of the counter to be destroyed.
+** 
+** OUTPUTS: 
+**  The counter is destroyed.
+** 
+** RETURNS: void
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_DESTROY_COUNTER(handle) PR_DestroyCounter((handle))
+#else
+#define PR_DESTROY_COUNTER(handle)
+#endif
+
+NSPR_API(void) 
+	PR_DestroyCounter( 
+		PRCounterHandle handle 
+);
+
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_GetCounterHandleFromName() -- Retreive a
+** counter's handle give its name.
+** 
+** DESCRIPTION: PR_GetCounterHandleFromName() retreives a
+** counter's handle from the counter database, given the name
+** the counter was originally created with.
+** 
+** INPUTS:
+**  qName: Counter's original QName.
+**  rName: Counter's original RName.
+** 
+** OUTPUTS:
+** 
+** RETURNS: 
+**  PRCounterHandle or PRCounterError.
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_GET_COUNTER_HANDLE_FROM_NAME(handle,qName,rName)\
+    (handle) = PR_GetCounterHandleFromName((qName),(rName))
+#else
+#define PR_GET_COUNTER_HANDLE_FROM_NAME(handle,qName,rName)
+#endif
+
+NSPR_API(PRCounterHandle) 
+	PR_GetCounterHandleFromName( 
+    	const char *qName, 
+    	const char *rName 
+);
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_GetCounterNameFromHandle() -- Retreive a
+** counter's name, given its handle.
+** 
+** DESCRIPTION: PR_GetCounterNameFromHandle() retreives a
+** counter's name given its handle.
+** 
+** INPUTS:
+**  qName: Where to store a pointer to qName.
+**  rName: Where to store a pointer to rName.
+**  description: Where to store a pointer to description.
+** 
+** OUTPUTS: Pointers to the Counter Feature's copies of the names
+** used when the counters were created.
+** 
+** RETURNS: void
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_GET_COUNTER_NAME_FROM_HANDLE(handle,qName,rName,description)\
+    PR_GetCounterNameFromHandle((handle),(qName),(rName),(description))
+#else
+#define PR_GET_COUNTER_NAME_FROM_HANDLE(handle,qName,rName,description )
+#endif
+
+NSPR_API(void) 
+	PR_GetCounterNameFromHandle( 
+    	PRCounterHandle handle,  
+	    const char **qName, 
+	    const char **rName, 
+		const char **description 
+);
+
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_IncrementCounter() -- Add one to the referenced
+** counter.
+** 
+** DESCRIPTION: Add one to the referenced counter.
+** 
+** INPUTS:
+**  handle: The PRCounterHandle of the counter to be incremented
+** 
+** OUTPUTS: The counter is incrementd.
+** 
+** RETURNS: void
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_INCREMENT_COUNTER(handle) PR_IncrementCounter(handle)
+#else
+#define PR_INCREMENT_COUNTER(handle)
+#endif
+
+NSPR_API(void) 
+	PR_IncrementCounter( 
+		PRCounterHandle handle
+);
+
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_DecrementCounter() -- Subtract one from the
+** referenced counter
+** 
+** DESCRIPTION: Subtract one from the referenced counter.
+** 
+** INPUTS: 
+**  handle: The PRCounterHandle of the coutner to be
+** decremented.
+** 
+** OUTPUTS: the counter is decremented.
+** 
+** RETURNS: void
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_DECREMENT_COUNTER(handle) PR_DecrementCounter(handle)
+#else
+#define PR_DECREMENT_COUNTER(handle)
+#endif
+
+NSPR_API(void) 
+	PR_DecrementCounter( 
+		PRCounterHandle handle
+);
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_AddToCounter() -- Add a value to a counter.
+** 
+** DESCRIPTION: Add value to the counter referenced by handle.
+** 
+** INPUTS:
+**  handle: the PRCounterHandle of the counter to be added to.
+** 
+**  value: the value to be added to the counter.
+** 
+** OUTPUTS: new value for counter.
+** 
+** RETURNS: void
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_ADD_TO_COUNTER(handle,value)\
+    PR_AddToCounter((handle),(value))
+#else
+#define PR_ADD_TO_COUNTER(handle,value)
+#endif
+
+NSPR_API(void) 
+	PR_AddToCounter( 
+    	PRCounterHandle handle, 
+	    PRUint32 value 
+);
+
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_SubtractFromCounter() -- A value is subtracted
+** from a counter.
+** 
+** DESCRIPTION:
+** Subtract a value from a counter.
+** 
+** INPUTS:
+**  handle: the PRCounterHandle of the counter to be subtracted
+** from.
+** 
+**  value: the value to be subtracted from the counter.
+** 
+** OUTPUTS: new value for counter
+** 
+** RETURNS: void
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_SUBTRACT_FROM_COUNTER(handle,value)\
+    PR_SubtractFromCounter((handle),(value))
+#else
+#define PR_SUBTRACT_FROM_COUNTER(handle,value)
+#endif
+
+NSPR_API(void) 
+	PR_SubtractFromCounter( 
+    	PRCounterHandle handle, 
+	    PRUint32 value 
+);
+
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_GetCounter() -- Retreive the value of a counter
+** 
+** DESCRIPTION:
+** Retreive the value of a counter.
+** 
+** INPUTS:
+**  handle: the PR_CounterHandle of the counter to be retreived
+** 
+** OUTPUTS:
+** 
+** RETURNS: The value of the referenced counter
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_GET_COUNTER(counter,handle)\
+    (counter) = PR_GetCounter((handle))
+#else
+#define PR_GET_COUNTER(counter,handle) 0
+#endif
+
+NSPR_API(PRUint32) 
+	PR_GetCounter( 
+		PRCounterHandle handle 
+);
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_SetCounter() -- Replace the content of counter
+** with value.
+** 
+** DESCRIPTION: The contents of the referenced counter are
+** replaced by value.
+** 
+** INPUTS:
+**  handle: the PRCounterHandle of the counter whose contents
+** are to be replaced.
+** 
+**  value: the new value of the counter.
+** 
+** OUTPUTS:
+** 
+** RETURNS: void
+** 
+** RESTRICTIONS:
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_SET_COUNTER(handle,value) PR_SetCounter((handle),(value))
+#else
+#define PR_SET_COUNTER(handle,value)
+#endif
+
+NSPR_API(void) 
+	PR_SetCounter( 
+		PRCounterHandle handle, 
+		PRUint32 value 
+);
+
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_FindNextCounterQname() -- Retreive the next QName counter
+** handle iterator
+** 
+** DESCRIPTION:
+** PR_FindNextCounterQname() retreives the first or next Qname
+** the counter data base, depending on the value of handle. When
+** handle is NULL, the function attempts to retreive the first
+** QName handle in the database. When handle is a handle previosly
+** retreived QName handle, then the function attempts to retreive
+** the next QName handle.
+** 
+** INPUTS: 
+**  handle: PRCounterHandle or NULL.
+** 
+** OUTPUTS: returned
+** 
+** RETURNS: PRCounterHandle or NULL when no more QName counter
+** handles are present.
+** 
+** RESTRICTIONS:
+**  A concurrent PR_CreateCounter() or PR_DestroyCounter() may
+** cause unpredictable results.
+** 
+** A PRCounterHandle returned from this function may only be used
+** in another PR_FindNextCounterQname() function call; other
+** operations may cause unpredictable results.
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_FIND_NEXT_COUNTER_QNAME(next,handle)\
+    (next) = PR_FindNextCounterQname((handle))
+#else
+#define PR_FIND_NEXT_COUNTER_QNAME(next,handle) NULL
+#endif
+
+NSPR_API(PRCounterHandle) 
+	PR_FindNextCounterQname( 
+        PRCounterHandle handle
+);
+
+/* -----------------------------------------------------------------------
+** FUNCTION: PR_FindNextCounterRname() -- Retreive the next RName counter
+** handle iterator
+** 
+** DESCRIPTION:
+** PR_FindNextCounterRname() retreives the first or next RNname
+** handle from the counter data base, depending on the
+** value of handle. When handle is NULL, the function attempts to
+** retreive the first RName handle in the database. When handle is
+** a handle previosly retreived RName handle, then the function
+** attempts to retreive the next RName handle.
+** 
+** INPUTS:
+**  handle: PRCounterHandle or NULL.
+**  qhandle: PRCounterHandle of a previously aquired via
+** PR_FIND_NEXT_QNAME_HANDLE()
+** 
+** OUTPUTS: returned
+** 
+** RETURNS: PRCounterHandle or NULL when no more RName counter
+** handles are present.
+** 
+** RESTRICTIONS:
+**  A concurrent PR_CreateCounter() or PR_DestroyCounter() may
+** cause unpredictable results.
+** 
+** A PRCounterHandle returned from this function may only be used
+** in another PR_FindNextCounterRname() function call; other
+** operations may cause unpredictable results.
+** 
+*/
+#if defined(DEBUG) || defined(FORCE_NSPR_COUNTERS)
+#define PR_FIND_NEXT_COUNTER_RNAME(next,rhandle,qhandle)\
+    (next) = PR_FindNextCounterRname((rhandle),(qhandle))
+#else
+#define PR_FIND_NEXT_COUNTER_RNAME(next,rhandle,qhandle)
+#endif
+
+NSPR_API(PRCounterHandle) 
+	PR_FindNextCounterRname( 
+        PRCounterHandle rhandle,
+        PRCounterHandle qhandle
+);
+
+PR_END_EXTERN_C
+
+#endif /* prcountr_h___ */
Property changes on: gecko-sdk\include\prcountr.h
___________________________________________________________________
Added: svn:eol-style
   + LF