Version 1.8 of gecko-sdk. Downloaded from here:...

gecko-sdk/include/prnetdb.h

Index: gecko-sdk/include/prnetdb.h
===================================================================
--- gecko-sdk/include/prnetdb.h	(revision 0)
+++ gecko-sdk/include/prnetdb.h	(revision 0)
@@ -0,0 +1,499 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef prnetdb_h___
+#define prnetdb_h___
+
+#include "prtypes.h"
+#include "prio.h"
+
+PR_BEGIN_EXTERN_C
+
+
+/*
+ *********************************************************************
+ *  Translate an Internet address to/from a character string
+ *********************************************************************
+ */
+NSPR_API(PRStatus) PR_StringToNetAddr(
+    const char *string, PRNetAddr *addr);
+
+NSPR_API(PRStatus) PR_NetAddrToString(
+    const PRNetAddr *addr, char *string, PRUint32 size);
+
+/*
+** Structures returned by network data base library.  All addresses are
+** supplied in host order, and returned in network order (suitable for
+** use in system calls).
+*/
+/*
+** Beware that WINSOCK.H defines h_addrtype and h_length as short.
+** Client code does direct struct copies of hostent to PRHostEnt and
+** hence the ifdef.
+*/
+typedef struct PRHostEnt {
+    char *h_name;       /* official name of host */
+    char **h_aliases;   /* alias list */
+#if defined(WIN32) || defined(WIN16)
+    PRInt16 h_addrtype; /* host address type */
+    PRInt16 h_length;   /* length of address */
+#else
+    PRInt32 h_addrtype; /* host address type */
+    PRInt32 h_length;   /* length of address */
+#endif
+    char **h_addr_list; /* list of addresses from name server */
+} PRHostEnt;
+
+/* A safe size to use that will mostly work... */
+#if (defined(AIX) && defined(_THREAD_SAFE)) || defined(OSF1)
+#define PR_NETDB_BUF_SIZE sizeof(struct protoent_data)
+#else
+#define PR_NETDB_BUF_SIZE 1024
+#endif
+
+/***********************************************************************
+** FUNCTION:	
+** DESCRIPTION:	PR_GetHostByName()
+** Lookup a host by name.
+**
+** INPUTS:
+**  char *hostname      Character string defining the host name of interest
+**  char *buf           A scratch buffer for the runtime to return result.
+**                      This buffer is allocated by the caller.
+**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
+**                      use is PR_NETDB_BUF_SIZE.
+** OUTPUTS:
+**  PRHostEnt *hostentry
+**                      This structure is filled in by the runtime if
+**                      the function returns PR_SUCCESS. This structure
+**                      is allocated by the caller.
+** RETURN:
+**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
+**                      the result will be PR_FAILURE and the reason
+**                      for the failure can be retrieved by PR_GetError().
+***********************************************************************/
+NSPR_API(PRStatus) PR_GetHostByName(
+    const char *hostname, char *buf, PRIntn bufsize, PRHostEnt *hostentry);
+
+/***********************************************************************
+** FUNCTION:	
+** DESCRIPTION:	PR_GetIPNodeByName()
+** Lookup a host by name. Equivalent to getipnodebyname(AI_DEFAULT)
+** of RFC 2553.
+**
+** INPUTS:
+**  char *hostname      Character string defining the host name of interest
+**  PRUint16 af         Address family (either PR_AF_INET or PR_AF_INET6)
+**  PRIntn flags        Specifies the types of addresses that are searched
+**                      for and the types of addresses that are returned.
+**                      The only supported flag is PR_AI_DEFAULT.
+**  char *buf           A scratch buffer for the runtime to return result.
+**                      This buffer is allocated by the caller.
+**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
+**                      use is PR_NETDB_BUF_SIZE.
+** OUTPUTS:
+**  PRHostEnt *hostentry
+**                      This structure is filled in by the runtime if
+**                      the function returns PR_SUCCESS. This structure
+**                      is allocated by the caller.
+** RETURN:
+**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
+**                      the result will be PR_FAILURE and the reason
+**                      for the failure can be retrieved by PR_GetError().
+***********************************************************************/
+
+
+#define PR_AI_ALL         0x08
+#define PR_AI_V4MAPPED    0x10
+#define PR_AI_ADDRCONFIG  0x20
+#define PR_AI_NOCANONNAME 0x8000
+#define PR_AI_DEFAULT     (PR_AI_V4MAPPED | PR_AI_ADDRCONFIG)
+
+NSPR_API(PRStatus) PR_GetIPNodeByName(
+    const char *hostname,
+    PRUint16 af,
+    PRIntn flags,
+    char *buf,
+    PRIntn bufsize,
+    PRHostEnt *hostentry);
+
+/***********************************************************************
+** FUNCTION:	
+** DESCRIPTION:	PR_GetHostByAddr()
+** Lookup a host entry by its network address.
+**
+** INPUTS:
+**  char *hostaddr      IP address of host in question
+**  char *buf           A scratch buffer for the runtime to return result.
+**                      This buffer is allocated by the caller.
+**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
+**                      use is PR_NETDB_BUF_SIZE.
+** OUTPUTS:
+**  PRHostEnt *hostentry
+**                      This structure is filled in by the runtime if
+**                      the function returns PR_SUCCESS. This structure
+**                      is allocated by the caller.
+** RETURN:
+**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
+**                      the result will be PR_FAILURE and the reason
+**                      for the failure can be retrieved by PR_GetError().
+***********************************************************************/
+NSPR_API(PRStatus) PR_GetHostByAddr(
+    const PRNetAddr *hostaddr, char *buf, PRIntn bufsize, PRHostEnt *hostentry);
+
+/***********************************************************************
+** FUNCTION:	PR_EnumerateHostEnt()	
+** DESCRIPTION:
+**  A stateless enumerator over a PRHostEnt structure acquired from
+**  PR_GetHostByName() PR_GetHostByAddr() to evaluate the possible
+**  network addresses.
+**
+** INPUTS:
+**  PRIntn  enumIndex   Index of the enumeration. The enumeration starts
+**                      and ends with a value of zero.
+**
+**  PRHostEnt *hostEnt  A pointer to a host entry struct that was
+**                      previously returned by PR_GetHostByName() or
+**                      PR_GetHostByAddr().
+**
+**  PRUint16 port       The port number to be assigned as part of the
+**                      PRNetAddr.
+**
+** OUTPUTS:
+**  PRNetAddr *address  A pointer to an address structure that will be
+**                      filled in by the call to the enumeration if the
+**                      result of the call is greater than zero.
+**
+** RETURN:
+**  PRIntn              The value that should be used for the next call
+**                      of the enumerator ('enumIndex'). The enumeration
+**                      is ended if this value is returned zero.
+**                      If a value of -1 is returned, the enumeration
+**                      has failed. The reason for the failure can be
+**                      retrieved by calling PR_GetError().
+***********************************************************************/
+NSPR_API(PRIntn) PR_EnumerateHostEnt(
+    PRIntn enumIndex, const PRHostEnt *hostEnt, PRUint16 port, PRNetAddr *address);
+
+/***********************************************************************
+** FUNCTION: PR_InitializeNetAddr(), 
+** DESCRIPTION:
+**  Initialize the fields of a PRNetAddr, assigning well known values as
+**  appropriate.
+**
+** INPUTS
+**  PRNetAddrValue val  The value to be assigned to the IP Address portion
+**                      of the network address. This can only specify the
+**                      special well known values that are equivalent to
+**                      INADDR_ANY and INADDR_LOOPBACK.
+**
+**  PRUint16 port       The port number to be assigned in the structure.
+**
+** OUTPUTS:
+**  PRNetAddr *addr     The address to be manipulated.
+**
+** RETURN:
+**  PRStatus            To indicate success or failure. If the latter, the
+**                      reason for the failure can be retrieved by calling
+**                      PR_GetError();
+***********************************************************************/
+typedef enum PRNetAddrValue
+{
+    PR_IpAddrNull,      /* do NOT overwrite the IP address */
+    PR_IpAddrAny,       /* assign logical INADDR_ANY to IP address */
+    PR_IpAddrLoopback,  /* assign logical INADDR_LOOPBACK  */
+    PR_IpAddrV4Mapped   /* IPv4 mapped address */
+} PRNetAddrValue;
+
+NSPR_API(PRStatus) PR_InitializeNetAddr(
+    PRNetAddrValue val, PRUint16 port, PRNetAddr *addr);
+
+/***********************************************************************
+** FUNCTION: PR_SetNetAddr(), 
+** DESCRIPTION:
+**  Set the fields of a PRNetAddr, assigning well known values as
+**  appropriate. This function is similar to PR_InitializeNetAddr
+**  but differs in that the address family is specified.
+**
+** INPUTS
+**  PRNetAddrValue val  The value to be assigned to the IP Address portion
+**                      of the network address. This can only specify the
+**                      special well known values that are equivalent to
+**                      INADDR_ANY and INADDR_LOOPBACK.
+**
+**  PRUint16 af         The address family (either PR_AF_INET or PR_AF_INET6)
+**
+**  PRUint16 port       The port number to be assigned in the structure.
+**
+** OUTPUTS:
+**  PRNetAddr *addr     The address to be manipulated.
+**
+** RETURN:
+**  PRStatus            To indicate success or failure. If the latter, the
+**                      reason for the failure can be retrieved by calling
+**                      PR_GetError();
+***********************************************************************/
+NSPR_API(PRStatus) PR_SetNetAddr(
+    PRNetAddrValue val, PRUint16 af, PRUint16 port, PRNetAddr *addr);
+
+/***********************************************************************
+** FUNCTION:	
+** DESCRIPTION:	PR_IsNetAddrType()
+** Determine if the network address is of the specified type.
+**
+** INPUTS:
+**  const PRNetAddr *addr   A network address.
+**  PRNetAddrValue          The type of network address 
+**
+** RETURN:
+**  PRBool                  PR_TRUE if the network address is of the
+**                          specified type, else PR_FALSE.
+***********************************************************************/
+NSPR_API(PRBool) PR_IsNetAddrType(const PRNetAddr *addr, PRNetAddrValue val);
+
+/***********************************************************************
+** FUNCTION:	
+** DESCRIPTION:	PR_ConvertIPv4AddrToIPv6()
+** Convert an IPv4 addr to an (IPv4-mapped) IPv6 addr
+**
+** INPUTS:
+**  PRUint32 	v4addr		IPv4 address
+**
+** OUTPUTS:
+**  PRIPv6Addr *v6addr      The converted IPv6 address
+**
+** RETURN:
+**  void
+**                       
+***********************************************************************/
+NSPR_API(void) PR_ConvertIPv4AddrToIPv6(PRUint32 v4addr, PRIPv6Addr *v6addr);
+
+/***********************************************************************
+** MACRO:	
+** DESCRIPTION:	PR_NetAddrFamily()
+** Get the 'family' field of a PRNetAddr union.
+**
+** INPUTS:
+**  const PRNetAddr *addr   A network address.
+**
+** RETURN:
+**  PRUint16                The 'family' field of 'addr'.
+***********************************************************************/
+#define PR_NetAddrFamily(addr) ((addr)->raw.family)
+
+/***********************************************************************
+** MACRO:	
+** DESCRIPTION:	PR_NetAddrInetPort()
+** Get the 'port' field of a PRNetAddr union.
+**
+** INPUTS:
+**  const PRNetAddr *addr   A network address.
+**
+** RETURN:
+**  PRUint16                The 'port' field of 'addr'.
+***********************************************************************/
+#define PR_NetAddrInetPort(addr) \
+    ((addr)->raw.family == PR_AF_INET6 ? (addr)->ipv6.port : (addr)->inet.port)
+
+/***********************************************************************
+** FUNCTION:	
+** DESCRIPTION:	PR_GetProtoByName()
+** Lookup a protocol entry based on protocol's name
+**
+** INPUTS:
+**  char *protocolname  Character string of the protocol's name.
+**  char *buf           A scratch buffer for the runtime to return result.
+**                      This buffer is allocated by the caller.
+**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
+**                      use is PR_NETDB_BUF_SIZE.
+** OUTPUTS:
+**  PRHostEnt *PRProtoEnt
+**                      This structure is filled in by the runtime if
+**                      the function returns PR_SUCCESS. This structure
+**                      is allocated by the caller.
+** RETURN:
+**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
+**                      the result will be PR_FAILURE and the reason
+**                      for the failure can be retrieved by PR_GetError().
+***********************************************************************/
+
+typedef struct PRProtoEnt {
+    char *p_name;       /* official protocol name */
+    char **p_aliases;   /* alias list */
+#if defined(WIN32) || defined(WIN16)
+    PRInt16 p_num;      /* protocol # */
+#else
+    PRInt32 p_num;      /* protocol # */
+#endif
+} PRProtoEnt;
+
+NSPR_API(PRStatus) PR_GetProtoByName(
+    const char* protocolname, char* buffer, PRInt32 bufsize, PRProtoEnt* result);
+
+/***********************************************************************
+** FUNCTION:	
+** DESCRIPTION:	PR_GetProtoByNumber()
+** Lookup a protocol entry based on protocol's number
+**
+** INPUTS:
+**  PRInt32 protocolnumber
+**                      Number assigned to the protocol.
+**  char *buf           A scratch buffer for the runtime to return result.
+**                      This buffer is allocated by the caller.
+**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
+**                      use is PR_NETDB_BUF_SIZE.
+** OUTPUTS:
+**  PRHostEnt *PRProtoEnt
+**                      This structure is filled in by the runtime if
+**                      the function returns PR_SUCCESS. This structure
+**                      is allocated by the caller.
+** RETURN:
+**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
+**                      the result will be PR_FAILURE and the reason
+**                      for the failure can be retrieved by PR_GetError().
+***********************************************************************/
+NSPR_API(PRStatus) PR_GetProtoByNumber(
+    PRInt32 protocolnumber, char* buffer, PRInt32 bufsize, PRProtoEnt* result);
+
+/***********************************************************************
+** FUNCTION:
+** DESCRIPTION: PR_GetAddrInfoByName()
+**  Lookup a host by name. Equivalent to getaddrinfo(host, NULL, ...) of
+**  RFC 3493.
+**
+** INPUTS:
+**  char *hostname      Character string defining the host name of interest
+**  PRUint16 af         May be PR_AF_UNSPEC or PR_AF_INET.
+**  PRIntn flags        May be either PR_AI_ADDRCONFIG or
+**                      PR_AI_ADDRCONFIG | PR_AI_NOCANONNAME. Include
+**                      PR_AI_NOCANONNAME to suppress the determination of
+**                      the canonical name corresponding to hostname.
+** RETURN:
+**  PRAddrInfo*         Handle to a data structure containing the results
+**                      of the host lookup. Use PR_EnumerateAddrInfo to
+**                      inspect the PRNetAddr values stored in this object.
+**                      When no longer needed, this handle must be destroyed
+**                      with a call to PR_FreeAddrInfo.  If a lookup error
+**                      occurs, then NULL will be returned.
+***********************************************************************/
+typedef struct PRAddrInfo PRAddrInfo;
+
+NSPR_API(PRAddrInfo*) PR_GetAddrInfoByName(
+    const char *hostname, PRUint16 af, PRIntn flags);
+
+/***********************************************************************
+** FUNCTION:
+** DESCRIPTION: PR_FreeAddrInfo()
+**  Destroy the PRAddrInfo handle allocated by PR_GetAddrInfoByName().
+**
+** INPUTS:
+**  PRAddrInfo *addrInfo
+**                      The handle resulting from a successful call to
+**                      PR_GetAddrInfoByName().
+** RETURN:
+**  void
+***********************************************************************/
+NSPR_API(void) PR_FreeAddrInfo(PRAddrInfo *addrInfo);
+
+/***********************************************************************
+** FUNCTION:
+** DESCRIPTION: PR_EnumerateAddrInfo()
+**  A stateless enumerator over a PRAddrInfo handle acquired from
+**  PR_GetAddrInfoByName() to inspect the possible network addresses.
+**
+** INPUTS:
+**  void *enumPtr       Index pointer of the enumeration. The enumeration
+**                      starts and ends with a value of NULL.
+**  PRAddrInfo *addrInfo
+**                      The PRAddrInfo handle returned by a successful
+**                      call to PR_GetAddrInfoByName().
+**  PRUint16 port       The port number to be assigned as part of the
+**                      PRNetAddr.
+** OUTPUTS:
+**  PRNetAddr *result   A pointer to an address structure that will be
+**                      filled in by the call to the enumeration if the
+**                      result of the call is greater than zero.
+** RETURN:
+**  void*               The value that should be used for the next call
+**                      of the enumerator ('enumPtr'). The enumeration
+**                      is ended if this value is returned NULL.
+***********************************************************************/
+NSPR_API(void *) PR_EnumerateAddrInfo(
+    void *enumPtr, const PRAddrInfo *addrInfo, PRUint16 port, PRNetAddr *result);
+
+/***********************************************************************
+** FUNCTION:
+** DESCRIPTION: PR_GetCanonNameFromAddrInfo()
+**  Extracts the canonical name of the hostname passed to
+**  PR_GetAddrInfoByName().
+**
+** INPUTS:
+**  PRAddrInfo *addrInfo 
+**                      The PRAddrInfo handle returned by a successful
+**                      call to PR_GetAddrInfoByName().
+** RETURN:
+**  const char *        A const pointer to the canonical hostname stored
+**                      in the given PRAddrInfo handle. This pointer is
+**                      invalidated once the PRAddrInfo handle is destroyed
+**                      by a call to PR_FreeAddrInfo().
+***********************************************************************/
+NSPR_API(const char *) PR_GetCanonNameFromAddrInfo(
+    const PRAddrInfo *addrInfo);
+
+/***********************************************************************
+** FUNCTIONS: PR_ntohs, PR_ntohl, PR_ntohll, PR_htons, PR_htonl, PR_htonll
+**
+** DESCRIPTION: API entries for the common byte ordering routines.
+**
+**      PR_ntohs        16 bit conversion from network to host
+**      PR_ntohl        32 bit conversion from network to host
+**      PR_ntohll       64 bit conversion from network to host
+**      PR_htons        16 bit conversion from host to network
+**      PR_htonl        32 bit conversion from host to network
+**      PR_ntonll       64 bit conversion from host to network
+**
+***********************************************************************/
+NSPR_API(PRUint16) PR_ntohs(PRUint16);
+NSPR_API(PRUint32) PR_ntohl(PRUint32);
+NSPR_API(PRUint64) PR_ntohll(PRUint64);
+NSPR_API(PRUint16) PR_htons(PRUint16);
+NSPR_API(PRUint32) PR_htonl(PRUint32);
+NSPR_API(PRUint64) PR_htonll(PRUint64);
+
+PR_END_EXTERN_C
+
+#endif /* prnetdb_h___ */
Property changes on: gecko-sdk\include\prnetdb.h
___________________________________________________________________
Added: svn:eol-style
   + LF