Version 1.8 of gecko-sdk. Downloaded from here:...

gecko-sdk/include/prprf.h

Index: gecko-sdk/include/prprf.h
===================================================================
--- gecko-sdk/include/prprf.h	(revision 0)
+++ gecko-sdk/include/prprf.h	(revision 0)
@@ -0,0 +1,154 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef prprf_h___
+#define prprf_h___
+
+/*
+** API for PR printf like routines. Supports the following formats
+**	%d - decimal
+**	%u - unsigned decimal
+**	%x - unsigned hex
+**	%X - unsigned uppercase hex
+**	%o - unsigned octal
+**	%hd, %hu, %hx, %hX, %ho - 16-bit versions of above
+**	%ld, %lu, %lx, %lX, %lo - 32-bit versions of above
+**	%lld, %llu, %llx, %llX, %llo - 64 bit versions of above
+**	%s - string
+**	%c - character
+**	%p - pointer (deals with machine dependent pointer size)
+**	%f - float
+**	%g - float
+*/
+#include "prtypes.h"
+#include "prio.h"
+#include <stdio.h>
+#include <stdarg.h>
+
+PR_BEGIN_EXTERN_C
+
+/*
+** sprintf into a fixed size buffer. Guarantees that a NUL is at the end
+** of the buffer. Returns the length of the written output, NOT including
+** the NUL, or (PRUint32)-1 if an error occurs.
+*/
+NSPR_API(PRUint32) PR_snprintf(char *out, PRUint32 outlen, const char *fmt, ...);
+
+/*
+** sprintf into a PR_MALLOC'd buffer. Return a pointer to the malloc'd
+** buffer on success, NULL on failure. Call "PR_smprintf_free" to release
+** the memory returned.
+*/
+NSPR_API(char*) PR_smprintf(const char *fmt, ...);
+
+/*
+** Free the memory allocated, for the caller, by PR_smprintf
+*/
+NSPR_API(void) PR_smprintf_free(char *mem);
+
+/*
+** "append" sprintf into a PR_MALLOC'd buffer. "last" is the last value of
+** the PR_MALLOC'd buffer. sprintf will append data to the end of last,
+** growing it as necessary using realloc. If last is NULL, PR_sprintf_append
+** will allocate the initial string. The return value is the new value of
+** last for subsequent calls, or NULL if there is a malloc failure.
+*/
+NSPR_API(char*) PR_sprintf_append(char *last, const char *fmt, ...);
+
+/*
+** sprintf into a function. The function "f" is called with a string to
+** place into the output. "arg" is an opaque pointer used by the stuff
+** function to hold any state needed to do the storage of the output
+** data. The return value is a count of the number of characters fed to
+** the stuff function, or (PRUint32)-1 if an error occurs.
+*/
+typedef PRIntn (*PRStuffFunc)(void *arg, const char *s, PRUint32 slen);
+
+NSPR_API(PRUint32) PR_sxprintf(PRStuffFunc f, void *arg, const char *fmt, ...);
+
+/*
+** fprintf to a PRFileDesc
+*/
+NSPR_API(PRUint32) PR_fprintf(struct PRFileDesc* fd, const char *fmt, ...);
+
+/*
+** va_list forms of the above.
+*/
+NSPR_API(PRUint32) PR_vsnprintf(char *out, PRUint32 outlen, const char *fmt, va_list ap);
+NSPR_API(char*) PR_vsmprintf(const char *fmt, va_list ap);
+NSPR_API(char*) PR_vsprintf_append(char *last, const char *fmt, va_list ap);
+NSPR_API(PRUint32) PR_vsxprintf(PRStuffFunc f, void *arg, const char *fmt, va_list ap);
+NSPR_API(PRUint32) PR_vfprintf(struct PRFileDesc* fd, const char *fmt, va_list ap);
+
+/*
+***************************************************************************
+** FUNCTION: PR_sscanf
+** DESCRIPTION:
+**     PR_sscanf() scans the input character string, performs data
+**     conversions, and stores the converted values in the data objects
+**     pointed to by its arguments according to the format control
+**     string.
+**
+**     PR_sscanf() behaves the same way as the sscanf() function in the
+**     Standard C Library (stdio.h), with the following exceptions:
+**     - PR_sscanf() handles the NSPR integer and floating point types,
+**       such as PRInt16, PRInt32, PRInt64, and PRFloat64, whereas
+**       sscanf() handles the standard C types like short, int, long,
+**       and double.
+**     - PR_sscanf() has no multibyte character support, while sscanf()
+**       does.
+** INPUTS:
+**     const char *buf
+**         a character string holding the input to scan
+**     const char *fmt
+**         the format control string for the conversions
+**     ...
+**         variable number of arguments, each of them is a pointer to
+**         a data object in which the converted value will be stored
+** OUTPUTS: none
+** RETURNS: PRInt32
+**     The number of values converted and stored.
+** RESTRICTIONS:
+**    Multibyte characters in 'buf' or 'fmt' are not allowed.
+***************************************************************************
+*/
+
+NSPR_API(PRInt32) PR_sscanf(const char *buf, const char *fmt, ...);
+
+PR_END_EXTERN_C
+
+#endif /* prprf_h___ */
Property changes on: gecko-sdk\include\prprf.h
___________________________________________________________________
Added: svn:eol-style
   + LF