Version 1.8 of gecko-sdk. Downloaded from here:...

gecko-sdk/include/prerr.h

+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#ifndef prerr_h___
+#define prerr_h___
+
+/*
+ *
+ * prerr.h
+ * This file is automatically generated; please do not edit it.
+ */
+
+/* Memory allocation attempt failed */
+#define PR_OUT_OF_MEMORY_ERROR                   (-6000L)
+
+/* Invalid file descriptor */
+#define PR_BAD_DESCRIPTOR_ERROR                  (-5999L)
+
+/* The operation would have blocked */
+#define PR_WOULD_BLOCK_ERROR                     (-5998L)
+
+/* Invalid memory address argument */
+#define PR_ACCESS_FAULT_ERROR                    (-5997L)
+
+/* Invalid function for file type */
+#define PR_INVALID_METHOD_ERROR                  (-5996L)
+
+/* Invalid memory address argument */
+#define PR_ILLEGAL_ACCESS_ERROR                  (-5995L)
+
+/* Some unknown error has occurred */
+#define PR_UNKNOWN_ERROR                         (-5994L)
+
+/* Operation interrupted by another thread */
+#define PR_PENDING_INTERRUPT_ERROR               (-5993L)
+
+/* function not implemented */
+#define PR_NOT_IMPLEMENTED_ERROR                 (-5992L)
+
+/* I/O function error */
+#define PR_IO_ERROR                              (-5991L)
+
+/* I/O operation timed out */
+#define PR_IO_TIMEOUT_ERROR                      (-5990L)
+
+/* I/O operation on busy file descriptor */
+#define PR_IO_PENDING_ERROR                      (-5989L)
+
+/* The directory could not be opened */
+#define PR_DIRECTORY_OPEN_ERROR                  (-5988L)
+
+/* Invalid function argument */
+#define PR_INVALID_ARGUMENT_ERROR                (-5987L)
+
+/* Network address not available (in use?) */
+#define PR_ADDRESS_NOT_AVAILABLE_ERROR           (-5986L)
+
+/* Network address type not supported */
+#define PR_ADDRESS_NOT_SUPPORTED_ERROR           (-5985L)
+
+/* Already connected */
+#define PR_IS_CONNECTED_ERROR                    (-5984L)
+
+/* Network address is invalid */
+#define PR_BAD_ADDRESS_ERROR                     (-5983L)
+
+/* Local Network address is in use */
+#define PR_ADDRESS_IN_USE_ERROR                  (-5982L)
+
+/* Connection refused by peer */
+#define PR_CONNECT_REFUSED_ERROR                 (-5981L)
+
+/* Network address is presently unreachable */
+#define PR_NETWORK_UNREACHABLE_ERROR             (-5980L)
+
+/* Connection attempt timed out */
+#define PR_CONNECT_TIMEOUT_ERROR                 (-5979L)
+
+/* Network file descriptor is not connected */
+#define PR_NOT_CONNECTED_ERROR                   (-5978L)
+
+/* Failure to load dynamic library */
+#define PR_LOAD_LIBRARY_ERROR                    (-5977L)
+
+/* Failure to unload dynamic library */
+#define PR_UNLOAD_LIBRARY_ERROR                  (-5976L)
+
+/* Symbol not found in any of the loaded dynamic libraries */
+#define PR_FIND_SYMBOL_ERROR                     (-5975L)
+
+/* Insufficient system resources */
+#define PR_INSUFFICIENT_RESOURCES_ERROR          (-5974L)
+
+/* A directory lookup on a network address has failed */
+#define PR_DIRECTORY_LOOKUP_ERROR                (-5973L)
+
+/* Attempt to access a TPD key that is out of range */
+#define PR_TPD_RANGE_ERROR                       (-5972L)
+
+/* Process open FD table is full */
+#define PR_PROC_DESC_TABLE_FULL_ERROR            (-5971L)
+
+/* System open FD table is full */
+#define PR_SYS_DESC_TABLE_FULL_ERROR             (-5970L)
+
+/* Network operation attempted on non-network file descriptor */
+#define PR_NOT_SOCKET_ERROR                      (-5969L)
+
+/* TCP-specific function attempted on a non-TCP file descriptor */
+#define PR_NOT_TCP_SOCKET_ERROR                  (-5968L)
+
+/* TCP file descriptor is already bound */
+#define PR_SOCKET_ADDRESS_IS_BOUND_ERROR         (-5967L)
+
+/* Access Denied */
+#define PR_NO_ACCESS_RIGHTS_ERROR                (-5966L)
+
+/* The requested operation is not supported by the platform */
+#define PR_OPERATION_NOT_SUPPORTED_ERROR         (-5965L)
+
+/* The host operating system does not support the protocol requested */
+#define PR_PROTOCOL_NOT_SUPPORTED_ERROR          (-5964L)
+
+/* Access to the remote file has been severed */
+#define PR_REMOTE_FILE_ERROR                     (-5963L)
+
+/* The value requested is too large to be stored in the data buffer provided */
+#define PR_BUFFER_OVERFLOW_ERROR                 (-5962L)
+
+/* TCP connection reset by peer */
+#define PR_CONNECT_RESET_ERROR                   (-5961L)
+
+/* Unused */
+#define PR_RANGE_ERROR                           (-5960L)
+
+/* The operation would have deadlocked */
+#define PR_DEADLOCK_ERROR                        (-5959L)
+
+/* The file is already locked */
+#define PR_FILE_IS_LOCKED_ERROR                  (-5958L)
+
+/* Write would result in file larger than the system allows */
+#define PR_FILE_TOO_BIG_ERROR                    (-5957L)
+
+/* The device for storing the file is full */
+#define PR_NO_DEVICE_SPACE_ERROR                 (-5956L)
+
+/* Unused */
+#define PR_PIPE_ERROR                            (-5955L)
+
+/* Unused */
+#define PR_NO_SEEK_DEVICE_ERROR                  (-5954L)
+
+/* Cannot perform a normal file operation on a directory */
+#define PR_IS_DIRECTORY_ERROR                    (-5953L)
+
+/* Symbolic link loop */
+#define PR_LOOP_ERROR                            (-5952L)
+
+/* File name is too long */
+#define PR_NAME_TOO_LONG_ERROR                   (-5951L)
+
+/* File not found */
+#define PR_FILE_NOT_FOUND_ERROR                  (-5950L)
+
+/* Cannot perform directory operation on a normal file */
+#define PR_NOT_DIRECTORY_ERROR                   (-5949L)
+
+/* Cannot write to a read-only file system */
+#define PR_READ_ONLY_FILESYSTEM_ERROR            (-5948L)
+
+/* Cannot delete a directory that is not empty */
+#define PR_DIRECTORY_NOT_EMPTY_ERROR             (-5947L)
+
+/* Cannot delete or rename a file object while the file system is busy */
+#define PR_FILESYSTEM_MOUNTED_ERROR              (-5946L)
+
+/* Cannot rename a file to a file system on another device */
+#define PR_NOT_SAME_DEVICE_ERROR                 (-5945L)
+
+/* The directory object in the file system is corrupted */
+#define PR_DIRECTORY_CORRUPTED_ERROR             (-5944L)
+
+/* Cannot create or rename a filename that already exists */
+#define PR_FILE_EXISTS_ERROR                     (-5943L)
+
+/* Directory is full.  No additional filenames may be added */
+#define PR_MAX_DIRECTORY_ENTRIES_ERROR           (-5942L)
+
+/* The required device was in an invalid state */
+#define PR_INVALID_DEVICE_STATE_ERROR            (-5941L)
+
+/* The device is locked */
+#define PR_DEVICE_IS_LOCKED_ERROR                (-5940L)
+
+/* No more entries in the directory */
+#define PR_NO_MORE_FILES_ERROR                   (-5939L)
+
+/* Encountered end of file */
+#define PR_END_OF_FILE_ERROR                     (-5938L)
+
+/* Seek error */
+#define PR_FILE_SEEK_ERROR                       (-5937L)
+
+/* The file is busy */
+#define PR_FILE_IS_BUSY_ERROR                    (-5936L)
+
+/* The I/O operation was aborted */
+#define PR_OPERATION_ABORTED_ERROR               (-5935L)
+
+/* Operation is still in progress (probably a non-blocking connect) */
+#define PR_IN_PROGRESS_ERROR                     (-5934L)
+
+/* Operation has already been initiated (probably a non-blocking connect) */
+#define PR_ALREADY_INITIATED_ERROR               (-5933L)
+
+/* The wait group is empty */
+#define PR_GROUP_EMPTY_ERROR                     (-5932L)
+
+/* Object state improper for request */
+#define PR_INVALID_STATE_ERROR                   (-5931L)
+
+/* Network is down */
+#define PR_NETWORK_DOWN_ERROR                    (-5930L)
+
+/* Socket shutdown */
+#define PR_SOCKET_SHUTDOWN_ERROR                 (-5929L)
+
+/* Connection aborted */
+#define PR_CONNECT_ABORTED_ERROR                 (-5928L)
+
+/* Host is unreachable */
+#define PR_HOST_UNREACHABLE_ERROR                (-5927L)
+
+/* The library is not loaded */
+#define PR_LIBRARY_NOT_LOADED_ERROR              (-5926L)
+
+/* Placeholder for the end of the list */
+#define PR_MAX_ERROR                             (-5925L)
+
+extern void nspr_InitializePRErrorTable(void);
+#define ERROR_TABLE_BASE_nspr (-6000L)
+
+#endif /* prerr_h___ */