Revert of Make SkPngCodec decode progressively.

Revert of Make SkPngCodec decode progressively. (patchset #24 id:480001 of https://codereview.chromium.org/1997703003/ )

Reason for revert:
Still breaking Google3 e.g.:

https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1

https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:BASE:123773415:1464804876959:b0ea9b1c&t=//third_party/skia/HEAD:dm

Original issue's description:
> Make SkPngCodec decode progressively.
> 
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
> 
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
> 
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
> 
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
> 
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
> 
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
> 
> SkCodec:
> - Add new APIs:
>     - startIncrementalDecode
>     - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
> 
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
>   SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
>   initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
>   (It only returned kSuccess or kInvalidInput anyway)
> 
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
> 
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
>   method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
> 
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
>   and compares it to the straightforward method
> 
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
>   sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
>   the new method of scanline decoding, and be explicit about whether an
>   image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
>   non-interlaced (except for an image that is too small - one row), but
>   the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
>   rewinding
> 
> BUG=skia:4211
> 
> The new version was generally faster than the old version (but not significantly so).
> 
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
> 
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
> 
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
> 
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
> 
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965

TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Committed: https://skia.googlesource.com/skia/+/26694c32d2a7a511bb2832204bb7759219b9d7bc

[scroggo, 2016-06-01 19:08:06]

The CQ bit was checked by scroggo@google.com

[scroggo, 2016-06-01 19:08:07]

Created Revert of Make SkPngCodec decode progressively.

[commit-bot: I haz the power, 2016-06-01 19:08:17]

CQ is trying da patch. Follow status at
 https://chromium-cq-status.appspot.com/patch-status/2026383002/1
View timeline at
 https://chromium-cq-status.appspot.com/patch-timeline/2026383002/1

[commit-bot: I haz the power, 2016-06-01 19:08:32]

Description was changed from

==========
Revert of Make SkPngCodec decode progressively. (patchset #24 id:480001 of
https://codereview.chromium.org/1997703003/ )

Reason for revert:
Still breaking Google3 e.g.:

https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c...

https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:...

Original issue's description:
> Make SkPngCodec decode progressively.
> 
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
> 
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
> 
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
> 
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
> 
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
> 
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
> 
> SkCodec:
> - Add new APIs:
>     - startIncrementalDecode
>     - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
> 
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
>   SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
>   initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
>   (It only returned kSuccess or kInvalidInput anyway)
> 
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
> 
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
>   method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
> 
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
>   and compares it to the straightforward method
> 
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
>   sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
>   the new method of scanline decoding, and be explicit about whether an
>   image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
>   non-interlaced (except for an image that is too small - one row), but
>   the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding
without
>   rewinding
> 
> BUG=skia:4211
> 
> The new version was generally faster than the old version (but not
significantly so).
> 
> Some raw performance differences can be found at
https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD...
> 
> Design doc can be found at
https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_...
> 
> GOLD_TRYBOT_URL=
https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&is...
> 
> Committed:
https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
> 
> Committed:
https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965

TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
==========

to

==========
Revert of Make SkPngCodec decode progressively. (patchset #24 id:480001 of
https://codereview.chromium.org/1997703003/ )

Reason for revert:
Still breaking Google3 e.g.:

https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c...

https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:...

Original issue's description:
> Make SkPngCodec decode progressively.
> 
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
> 
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
> 
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
> 
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
> 
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
> 
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
> 
> SkCodec:
> - Add new APIs:
>     - startIncrementalDecode
>     - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
> 
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
>   SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
>   initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
>   (It only returned kSuccess or kInvalidInput anyway)
> 
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
> 
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
>   method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
> 
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
>   and compares it to the straightforward method
> 
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
>   sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
>   the new method of scanline decoding, and be explicit about whether an
>   image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
>   non-interlaced (except for an image that is too small - one row), but
>   the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding
without
>   rewinding
> 
> BUG=skia:4211
> 
> The new version was generally faster than the old version (but not
significantly so).
> 
> Some raw performance differences can be found at
https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD...
> 
> Design doc can be found at
https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_...
> 
> GOLD_TRYBOT_URL=
https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&is...
> 
> Committed:
https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
> 
> Committed:
https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965

TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211

Committed:
https://skia.googlesource.com/skia/+/26694c32d2a7a511bb2832204bb7759219b9d7bc
==========

[commit-bot: I haz the power, 2016-06-01 19:08:33]

Committed patchset #1 (id:1) as
https://skia.googlesource.com/skia/+/26694c32d2a7a511bb2832204bb7759219b9d7bc