Update to libjpeg_turbo 1.4.90

jccoefct.c

 /*
  * jccoefct.c
  *
+ * This file was part of the Independent JPEG Group's software:
  * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
+ * It was modified by The libjpeg-turbo Project to include only code and
+ * information relevant to libjpeg-turbo.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
  *
  * This file contains the coefficient buffer controller for compression.
  * This controller is the top level of the JPEG compressor proper.
  * The coefficient buffer lies between forward-DCT and entropy encoding steps.
  */
 
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
 
@@ skipping 10 matching lines @@
 #define FULL_COEF_BUFFER_SUPPORTED
 #endif
 #endif
 
 
 /* Private buffer controller object */
 
 typedef struct {
   struct jpeg_c_coef_controller pub; /* public fields */
 
-  JDIMENSION iMCU_row_num;      /* iMCU row # within image */
-  JDIMENSION mcu_ctr;           /* counts MCUs processed in current row */
-  int MCU_vert_offset;          /* counts MCU rows within iMCU row */
-  int MCU_rows_per_iMCU_row;    /* number of such rows needed */
+  JDIMENSION iMCU_row_num;      /* iMCU row # within image */
+  JDIMENSION mcu_ctr;           /* counts MCUs processed in current row */
+  int MCU_vert_offset;          /* counts MCU rows within iMCU row */
+  int MCU_rows_per_iMCU_row;    /* number of such rows needed */
 
   /* For single-pass compression, it's sufficient to buffer just one MCU
    * (although this may prove a bit slow in practice).  We allocate a
    * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each
-   * MCU constructed and sent.  (On 80x86, the workspace is FAR even though
-   * it's not really very big; this is to keep the module interfaces unchanged
-   * when a large coefficient buffer is necessary.)
-   * In multi-pass modes, this array points to the current MCU's blocks
-   * within the virtual arrays.
+   * MCU constructed and sent.  In multi-pass modes, this array points to the
+   * current MCU's blocks within the virtual arrays.
    */
   JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
 
   /* In multi-pass modes, we need a virtual block array for each component. */
   jvirt_barray_ptr whole_image[MAX_COMPONENTS];
 } my_coef_controller;
 
-typedef my_coef_controller * my_coef_ptr;
+typedef my_coef_controller *my_coef_ptr;
 
 
 /* Forward declarations */
 METHODDEF(boolean) compress_data
-    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+        (j_compress_ptr cinfo, JSAMPIMAGE input_buf);
 #ifdef FULL_COEF_BUFFER_SUPPORTED
 METHODDEF(boolean) compress_first_pass
-    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+        (j_compress_ptr cinfo, JSAMPIMAGE input_buf);
 METHODDEF(boolean) compress_output
-    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
+        (j_compress_ptr cinfo, JSAMPIMAGE input_buf);
 #endif
 
 
 LOCAL(void)
 start_iMCU_row (j_compress_ptr cinfo)
 /* Reset within-iMCU-row counters for a new row */
 {
   my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
 
   /* In an interleaved scan, an MCU row is the same as an iMCU row.
@@ skipping 58 matching lines @@
  * Returns TRUE if the iMCU row is completed, FALSE if suspended.
  *
  * NB: input_buf contains a plane for each component in image,
  * which we index according to the component's SOF position.
  */
 
 METHODDEF(boolean)
 compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
 {
   my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION MCU_col_num;       /* index of current MCU within row */
+  JDIMENSION MCU_col_num;       /* index of current MCU within row */
   JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
   JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
   int blkn, bi, ci, yindex, yoffset, blockcnt;
   JDIMENSION ypos, xpos;
   jpeg_component_info *compptr;
 
   /* Loop to write as much as one whole iMCU row */
   for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
        yoffset++) {
     for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col;
-         MCU_col_num++) {
+         MCU_col_num++) {
       /* Determine where data comes from in input_buf and do the DCT thing.
        * Each call on forward_DCT processes a horizontal row of DCT blocks
        * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks
        * sequentially.  Dummy blocks at the right or bottom edge are filled in
        * specially.  The data in them does not matter for image reconstruction,
        * so we fill them with values that will encode to the smallest amount of
        * data, viz: all zeroes in the AC entries, DC entries equal to previous
        * block's DC value.  (Thanks to Thomas Kinsman for this idea.)
        */
       blkn = 0;
       for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-        compptr = cinfo->cur_comp_info[ci];
-        blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
-                                                : compptr->last_col_width;
-        xpos = MCU_col_num * compptr->MCU_sample_width;
-        ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
-        for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
-          if (coef->iMCU_row_num < last_iMCU_row ||
-              yoffset+yindex < compptr->last_row_height) {
-            (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-                                         input_buf[compptr->component_index],
-                                         coef->MCU_buffer[blkn],
-                                         ypos, xpos, (JDIMENSION) blockcnt);
-            if (blockcnt < compptr->MCU_width) {
-              /* Create some dummy blocks at the right edge of the image. */
-              jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt],
-                        (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
-              for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
-                coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
-              }
-            }
-          } else {
-            /* Create a row of dummy blocks at the bottom of the image. */
-            jzero_far((void FAR *) coef->MCU_buffer[blkn],
-                      compptr->MCU_width * SIZEOF(JBLOCK));
-            for (bi = 0; bi < compptr->MCU_width; bi++) {
-              coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
-            }
-          }
-          blkn += compptr->MCU_width;
-          ypos += DCTSIZE;
-        }
+        compptr = cinfo->cur_comp_info[ci];
+        blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
+                                                : compptr->last_col_width;
+        xpos = MCU_col_num * compptr->MCU_sample_width;
+        ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
+        for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+          if (coef->iMCU_row_num < last_iMCU_row ||
+              yoffset+yindex < compptr->last_row_height) {
+            (*cinfo->fdct->forward_DCT) (cinfo, compptr,
+                                         input_buf[compptr->component_index],
+                                         coef->MCU_buffer[blkn],
+                                         ypos, xpos, (JDIMENSION) blockcnt);
+            if (blockcnt < compptr->MCU_width) {
+              /* Create some dummy blocks at the right edge of the image. */
+              jzero_far((void *) coef->MCU_buffer[blkn + blockcnt],
+                        (compptr->MCU_width - blockcnt) * sizeof(JBLOCK));
+              for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
+                coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
+              }
+            }
+          } else {
+            /* Create a row of dummy blocks at the bottom of the image. */
+            jzero_far((void *) coef->MCU_buffer[blkn],
+                      compptr->MCU_width * sizeof(JBLOCK));
+            for (bi = 0; bi < compptr->MCU_width; bi++) {
+              coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
+            }
+          }
+          blkn += compptr->MCU_width;
+          ypos += DCTSIZE;
+        }
       }
       /* Try to write the MCU.  In event of a suspension failure, we will
        * re-DCT the MCU on restart (a bit inefficient, could be fixed...)
        */
       if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
-        /* Suspension forced; update state counters and exit */
-        coef->MCU_vert_offset = yoffset;
-        coef->mcu_ctr = MCU_col_num;
-        return FALSE;
+        /* Suspension forced; update state counters and exit */
+        coef->MCU_vert_offset = yoffset;
+        coef->mcu_ctr = MCU_col_num;
+        return FALSE;
       }
     }
     /* Completed an MCU row, but perhaps not an iMCU row */
     coef->mcu_ctr = 0;
   }
   /* Completed the iMCU row, advance counters for next one */
   coef->iMCU_row_num++;
   start_iMCU_row(cinfo);
   return TRUE;
 }
@@ skipping 54 matching lines @@
     /* Count number of dummy blocks to be added at the right margin. */
     ndummy = (int) (blocks_across % h_samp_factor);
     if (ndummy > 0)
       ndummy = h_samp_factor - ndummy;
     /* Perform DCT for all non-dummy blocks in this iMCU row.  Each call
      * on forward_DCT processes a complete horizontal row of DCT blocks.
      */
     for (block_row = 0; block_row < block_rows; block_row++) {
       thisblockrow = buffer[block_row];
       (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-                                   input_buf[ci], thisblockrow,
-                                   (JDIMENSION) (block_row * DCTSIZE),
-                                   (JDIMENSION) 0, blocks_across);
+                                   input_buf[ci], thisblockrow,
+                                   (JDIMENSION) (block_row * DCTSIZE),
+                                   (JDIMENSION) 0, blocks_across);
       if (ndummy > 0) {
-        /* Create dummy blocks at the right edge of the image. */
-        thisblockrow += blocks_across; /* => first dummy block */
-        jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
-        lastDC = thisblockrow[-1][0];
-        for (bi = 0; bi < ndummy; bi++) {
-          thisblockrow[bi][0] = lastDC;
-        }
+        /* Create dummy blocks at the right edge of the image. */
+        thisblockrow += blocks_across; /* => first dummy block */
+        jzero_far((void *) thisblockrow, ndummy * sizeof(JBLOCK));
+        lastDC = thisblockrow[-1][0];
+        for (bi = 0; bi < ndummy; bi++) {
+          thisblockrow[bi][0] = lastDC;
+        }
       }
     }
     /* If at end of image, create dummy block rows as needed.
      * The tricky part here is that within each MCU, we want the DC values
      * of the dummy blocks to match the last real block's DC value.
      * This squeezes a few more bytes out of the resulting file...
      */
     if (coef->iMCU_row_num == last_iMCU_row) {
-      blocks_across += ndummy;  /* include lower right corner */
+      blocks_across += ndummy;  /* include lower right corner */
       MCUs_across = blocks_across / h_samp_factor;
       for (block_row = block_rows; block_row < compptr->v_samp_factor;
-           block_row++) {
-        thisblockrow = buffer[block_row];
-        lastblockrow = buffer[block_row-1];
-        jzero_far((void FAR *) thisblockrow,
-                  (size_t) (blocks_across * SIZEOF(JBLOCK)));
-        for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
-          lastDC = lastblockrow[h_samp_factor-1][0];
-          for (bi = 0; bi < h_samp_factor; bi++) {
-            thisblockrow[bi][0] = lastDC;
-          }
-          thisblockrow += h_samp_factor; /* advance to next MCU in row */
-          lastblockrow += h_samp_factor;
-        }
+           block_row++) {
+        thisblockrow = buffer[block_row];
+        lastblockrow = buffer[block_row-1];
+        jzero_far((void *) thisblockrow,
+                  (size_t) (blocks_across * sizeof(JBLOCK)));
+        for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
+          lastDC = lastblockrow[h_samp_factor-1][0];
+          for (bi = 0; bi < h_samp_factor; bi++) {
+            thisblockrow[bi][0] = lastDC;
+          }
+          thisblockrow += h_samp_factor; /* advance to next MCU in row */
+          lastblockrow += h_samp_factor;
+        }
       }
     }
   }
   /* NB: compress_output will increment iMCU_row_num if successful.
    * A suspension return will result in redoing all the work above next time.
    */
 
   /* Emit data to the entropy encoder, sharing code with subsequent passes */
   return compress_output(cinfo, input_buf);
 }
 
 
 /*
  * Process some data in subsequent passes of a multi-pass case.
  * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
  * per call, ie, v_samp_factor block rows for each component in the scan.
  * The data is obtained from the virtual arrays and fed to the entropy coder.
  * Returns TRUE if the iMCU row is completed, FALSE if suspended.
  *
  * NB: input_buf is ignored; it is likely to be a NULL pointer.
  */
 
 METHODDEF(boolean)
 compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
 {
   my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION MCU_col_num;       /* index of current MCU within row */
+  JDIMENSION MCU_col_num;       /* index of current MCU within row */
   int blkn, ci, xindex, yindex, yoffset;
   JDIMENSION start_col;
   JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
   JBLOCKROW buffer_ptr;
   jpeg_component_info *compptr;
 
   /* Align the virtual buffers for the components used in this scan.
    * NB: during first pass, this is safe only because the buffers will
    * already be aligned properly, so jmemmgr.c won't need to do any I/O.
    */
   for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
     compptr = cinfo->cur_comp_info[ci];
     buffer[ci] = (*cinfo->mem->access_virt_barray)
       ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
        coef->iMCU_row_num * compptr->v_samp_factor,
        (JDIMENSION) compptr->v_samp_factor, FALSE);
   }
 
   /* Loop to process one whole iMCU row */
   for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
        yoffset++) {
     for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
-         MCU_col_num++) {
+         MCU_col_num++) {
       /* Construct list of pointers to DCT blocks belonging to this MCU */
-      blkn = 0;                 /* index of current DCT block within MCU */
+      blkn = 0;                 /* index of current DCT block within MCU */
       for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-        compptr = cinfo->cur_comp_info[ci];
-        start_col = MCU_col_num * compptr->MCU_width;
-        for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
-          buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
-          for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
-            coef->MCU_buffer[blkn++] = buffer_ptr++;
-          }
-        }
+        compptr = cinfo->cur_comp_info[ci];
+        start_col = MCU_col_num * compptr->MCU_width;
+        for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
+          buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
+          for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
+            coef->MCU_buffer[blkn++] = buffer_ptr++;
+          }
+        }
       }
       /* Try to write the MCU. */
       if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
-        /* Suspension forced; update state counters and exit */
-        coef->MCU_vert_offset = yoffset;
-        coef->mcu_ctr = MCU_col_num;
-        return FALSE;
+        /* Suspension forced; update state counters and exit */
+        coef->MCU_vert_offset = yoffset;
+        coef->mcu_ctr = MCU_col_num;
+        return FALSE;
       }
     }
     /* Completed an MCU row, but perhaps not an iMCU row */
     coef->mcu_ctr = 0;
   }
   /* Completed the iMCU row, advance counters for next one */
   coef->iMCU_row_num++;
   start_iMCU_row(cinfo);
   return TRUE;
 }
 
 #endif /* FULL_COEF_BUFFER_SUPPORTED */
 
 
 /*
  * Initialize coefficient buffer controller.
  */
 
 GLOBAL(void)
 jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer)
 {
   my_coef_ptr coef;
 
   coef = (my_coef_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-                                SIZEOF(my_coef_controller));
+                                sizeof(my_coef_controller));
   cinfo->coef = (struct jpeg_c_coef_controller *) coef;
   coef->pub.start_pass = start_pass_coef;
 
   /* Create the coefficient buffer. */
   if (need_full_buffer) {
 #ifdef FULL_COEF_BUFFER_SUPPORTED
     /* Allocate a full-image virtual array for each component, */
     /* padded to a multiple of samp_factor DCT blocks in each direction. */
     int ci;
     jpeg_component_info *compptr;
 
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-         ci++, compptr++) {
+         ci++, compptr++) {
       coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
-        ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-         (JDIMENSION) jround_up((long) compptr->width_in_blocks,
-                                (long) compptr->h_samp_factor),
-         (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-                                (long) compptr->v_samp_factor),
-         (JDIMENSION) compptr->v_samp_factor);
+        ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+         (JDIMENSION) jround_up((long) compptr->width_in_blocks,
+                                (long) compptr->h_samp_factor),
+         (JDIMENSION) jround_up((long) compptr->height_in_blocks,
+                                (long) compptr->v_samp_factor),
+         (JDIMENSION) compptr->v_samp_factor);
     }
 #else
     ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
 #endif
   } else {
     /* We only need a single-MCU buffer. */
     JBLOCKROW buffer;
     int i;
 
     buffer = (JBLOCKROW)
       (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-                                  C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+                                  C_MAX_BLOCKS_IN_MCU * sizeof(JBLOCK));
     for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
       coef->MCU_buffer[i] = buffer + i;
     }
     coef->whole_image[0] = NULL; /* flag for no virtual arrays */
   }
 }