Update libjpeg_turbo to 1.4.90 from https://github.com/libjpeg-turbo/

turbojpeg.h

Index: turbojpeg.h
diff --git a/turbojpeg.h b/turbojpeg.h
index a563c8188125f681edf8353a64079803a4521f14..583029fa7e6a88b58fbbf2b87ba963be92abbb16 100644
--- a/turbojpeg.h
+++ b/turbojpeg.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C)2009-2013 D. R. Commander.  All Rights Reserved.
+ * Copyright (C)2009-2015 D. R. Commander.  All Rights Reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -42,6 +42,35 @@
  * TurboJPEG API.  This API provides an interface for generating, decoding, and
  * transforming planar YUV and JPEG images in memory.
  *
+ * @anchor YUVnotes
+ * YUV Image Format Notes
+ * ----------------------
+ * Technically, the JPEG format uses the YCbCr colorspace (which is technically
+ * not a colorspace but a color transform), but per the convention of the
+ * digital video community, the TurboJPEG API uses "YUV" to refer to an image
+ * format consisting of Y, Cb, and Cr image planes.
+ *
+ * Each plane is simply a 2D array of bytes, each byte representing the value
+ * of one of the components (Y, Cb, or Cr) at a particular location in the
+ * image.  The width and height of each plane are determined by the image
+ * width, height, and level of chrominance subsampling.   The luminance plane
+ * width is the image width padded to the nearest multiple of the horizontal
+ * subsampling factor (2 in the case of 4:2:0 and 4:2:2, 4 in the case of
+ * 4:1:1, 1 in the case of 4:4:4 or grayscale.)  Similarly, the luminance plane
+ * height is the image height padded to the nearest multiple of the vertical
+ * subsampling factor (2 in the case of 4:2:0 or 4:4:0, 1 in the case of 4:4:4
+ * or grayscale.)  This is irrespective of any additional padding that may be
+ * specified as an argument to the various YUV functions.  The chrominance
+ * plane width is equal to the luminance plane width divided by the horizontal
+ * subsampling factor, and the chrominance plane height is equal to the
+ * luminance plane height divided by the vertical subsampling factor.
+ *
+ * For example, if the source image is 35 x 35 pixels and 4:2:2 subsampling is
+ * used, then the luminance plane would be 36 x 35 bytes, and each of the
+ * chrominance planes would be 18 x 35 bytes.  If you specify a line padding of
+ * 4 bytes on top of this, then the luminance plane would be 36 x 35 bytes, and
+ * each of the chrominance planes would be 20 x 35 bytes.
+ *
  * @{
  */
 
@@ -49,20 +78,16 @@
 /**
  * The number of chrominance subsampling options
  */
-#define TJ_NUMSAMP 5
+#define TJ_NUMSAMP 6
 
 /**
  * Chrominance subsampling options.
- * When an image is converted from the RGB to the YCbCr colorspace as part of
- * the JPEG compression process, some of the Cb and Cr (chrominance) components
- * can be discarded or averaged together to produce a smaller image with little
- * perceptible loss of image clarity (the human eye is more sensitive to small
- * changes in brightness than small changes in color.)  This is called
- * "chrominance subsampling".
- * <p>
- * NOTE: Technically, the JPEG format uses the YCbCr colorspace, but per the
- * convention of the digital video community, the TurboJPEG API uses "YUV" to
- * refer to an image format consisting of Y, Cb, and Cr image planes.
+ * When pixels are converted from RGB to YCbCr (see #TJCS_YCbCr) or from CMYK
+ * to YCCK (see #TJCS_YCCK) as part of the JPEG compression process, some of
+ * the Cb and Cr (chrominance) components can be discarded or averaged together
+ * to produce a smaller image with little perceptible loss of image clarity
+ * (the human eye is more sensitive to small changes in brightness than to
+ * small changes in color.)  This is called "chrominance subsampling".
  */
 enum TJSAMP
 {
@@ -89,9 +114,22 @@ enum TJSAMP
   /**
    * 4:4:0 chrominance subsampling.  The JPEG or YUV image will contain one
    * chrominance component for every 1x2 block of pixels in the source image.
-   * Note that 4:4:0 subsampling is not fully accelerated in libjpeg-turbo.
+   *
+   * @note 4:4:0 subsampling is not fully accelerated in libjpeg-turbo.
    */
-  TJSAMP_440
+  TJSAMP_440,
+  /**
+   * 4:1:1 chrominance subsampling.  The JPEG or YUV image will contain one
+   * chrominance component for every 4x1 block of pixels in the source image.
+   * JPEG images compressed with 4:1:1 subsampling will be almost exactly the
+   * same size as those compressed with 4:2:0 subsampling, and in the
+   * aggregate, both subsampling methods produce approximately the same
+   * perceptual quality.  However, 4:1:1 is better able to reproduce sharp
+   * horizontal features.
+   *
+   * @note 4:1:1 subsampling is not fully accelerated in libjpeg-turbo.
+   */
+  TJSAMP_411
 };
 
 /**
@@ -100,9 +138,10 @@ enum TJSAMP
  * - 8x8 for no subsampling or grayscale
  * - 16x8 for 4:2:2
  * - 8x16 for 4:4:0
- * - 16x16 for 4:2:0 
+ * - 16x16 for 4:2:0
+ * - 32x8 for 4:1:1
  */
-static const int tjMCUWidth[TJ_NUMSAMP]  = {8, 16, 16, 8, 8};
+static const int tjMCUWidth[TJ_NUMSAMP]  = {8, 16, 16, 8, 8, 32};
 
 /**
  * MCU block height (in pixels) for a given level of chrominance subsampling.
@@ -110,15 +149,16 @@ static const int tjMCUWidth[TJ_NUMSAMP]  = {8, 16, 16, 8, 8};
  * - 8x8 for no subsampling or grayscale
  * - 16x8 for 4:2:2
  * - 8x16 for 4:4:0
- * - 16x16 for 4:2:0 
+ * - 16x16 for 4:2:0
+ * - 32x8 for 4:1:1
  */
-static const int tjMCUHeight[TJ_NUMSAMP] = {8, 8, 16, 8, 16};
+static const int tjMCUHeight[TJ_NUMSAMP] = {8, 8, 16, 8, 16, 8};
 
 
 /**
  * The number of pixel formats
  */
-#define TJ_NUMPF 11
+#define TJ_NUMPF 12
 
 /**
  * Pixel formats
@@ -193,16 +233,33 @@ enum TJPF
    * decompressing, the X component is guaranteed to be 0xFF, which can be
    * interpreted as an opaque alpha channel.
    */
-  TJPF_ARGB
+  TJPF_ARGB,
+  /**
+   * CMYK pixel format.  Unlike RGB, which is an additive color model used
+   * primarily for display, CMYK (Cyan/Magenta/Yellow/Key) is a subtractive
+   * color model used primarily for printing.  In the CMYK color model, the
+   * value of each color component typically corresponds to an amount of cyan,
+   * magenta, yellow, or black ink that is applied to a white background.  In
+   * order to convert between CMYK and RGB, it is necessary to use a color
+   * management system (CMS.)  A CMS will attempt to map colors within the
+   * printer's gamut to perceptually similar colors in the display's gamut and
+   * vice versa, but the mapping is typically not 1:1 or reversible, nor can it
+   * be defined with a simple formula.  Thus, such a conversion is out of scope
+   * for a codec library.  However, the TurboJPEG API allows for compressing
+   * CMYK pixels into a YCCK JPEG image (see #TJCS_YCCK) and decompressing YCCK
+   * JPEG images into CMYK pixels.
+   */
+  TJPF_CMYK
 };
 
+
 /**
  * Red offset (in bytes) for a given pixel format.  This specifies the number
  * of bytes that the red component is offset from the start of the pixel.  For
  * instance, if a pixel of format TJ_BGRX is stored in <tt>char pixel[]</tt>,
  * then the red component will be <tt>pixel[tjRedOffset[TJ_BGRX]]</tt>.
  */
-static const int tjRedOffset[TJ_NUMPF] = {0, 2, 0, 2, 3, 1, 0, 0, 2, 3, 1};
+static const int tjRedOffset[TJ_NUMPF] = {0, 2, 0, 2, 3, 1, 0, 0, 2, 3, 1, -1};
 /**
  * Green offset (in bytes) for a given pixel format.  This specifies the number
  * of bytes that the green component is offset from the start of the pixel.
@@ -210,46 +267,88 @@ static const int tjRedOffset[TJ_NUMPF] = {0, 2, 0, 2, 3, 1, 0, 0, 2, 3, 1};
  * <tt>char pixel[]</tt>, then the green component will be
  * <tt>pixel[tjGreenOffset[TJ_BGRX]]</tt>.
  */
-static const int tjGreenOffset[TJ_NUMPF] = {1, 1, 1, 1, 2, 2, 0, 1, 1, 2, 2};
+static const int tjGreenOffset[TJ_NUMPF] = {1, 1, 1, 1, 2, 2, 0, 1, 1, 2, 2, -1};
 /**
  * Blue offset (in bytes) for a given pixel format.  This specifies the number
  * of bytes that the Blue component is offset from the start of the pixel.  For
  * instance, if a pixel of format TJ_BGRX is stored in <tt>char pixel[]</tt>,
  * then the blue component will be <tt>pixel[tjBlueOffset[TJ_BGRX]]</tt>.
  */
-static const int tjBlueOffset[TJ_NUMPF] = {2, 0, 2, 0, 1, 3, 0, 2, 0, 1, 3};
+static const int tjBlueOffset[TJ_NUMPF] = {2, 0, 2, 0, 1, 3, 0, 2, 0, 1, 3, -1};
 
 /**
  * Pixel size (in bytes) for a given pixel format.
  */
-static const int tjPixelSize[TJ_NUMPF] = {3, 3, 4, 4, 4, 4, 1, 4, 4, 4, 4};
+static const int tjPixelSize[TJ_NUMPF] = {3, 3, 4, 4, 4, 4, 1, 4, 4, 4, 4, 4};
 
 
 /**
- * The uncompressed source/destination image is stored in bottom-up (Windows,
- * OpenGL) order, not top-down (X11) order.
- */
-#define TJFLAG_BOTTOMUP        2
-/**
- * Turn off CPU auto-detection and force TurboJPEG to use MMX code (if the
- * underlying codec supports it.)
- */
-#define TJFLAG_FORCEMMX        8
-/**
- * Turn off CPU auto-detection and force TurboJPEG to use SSE code (if the
- * underlying codec supports it.)
+ * The number of JPEG colorspaces
  */
-#define TJFLAG_FORCESSE       16
+#define TJ_NUMCS 5
+
 /**
- * Turn off CPU auto-detection and force TurboJPEG to use SSE2 code (if the
- * underlying codec supports it.)
+ * JPEG colorspaces
  */
-#define TJFLAG_FORCESSE2      32
+enum TJCS
+{
+  /**
+   * RGB colorspace.  When compressing the JPEG image, the R, G, and B
+   * components in the source image are reordered into image planes, but no
+   * colorspace conversion or subsampling is performed.  RGB JPEG images can be
+   * decompressed to any of the extended RGB pixel formats or grayscale, but
+   * they cannot be decompressed to YUV images.
+   */
+  TJCS_RGB=0,
+  /**
+   * YCbCr colorspace.  YCbCr is not an absolute colorspace but rather a
+   * mathematical transformation of RGB designed solely for storage and
+   * transmission.  YCbCr images must be converted to RGB before they can
+   * actually be displayed.  In the YCbCr colorspace, the Y (luminance)
+   * component represents the black & white portion of the original image, and
+   * the Cb and Cr (chrominance) components represent the color portion of the
+   * original image.  Originally, the analog equivalent of this transformation
+   * allowed the same signal to drive both black & white and color televisions,
+   * but JPEG images use YCbCr primarily because it allows the color data to be
+   * optionally subsampled for the purposes of reducing bandwidth or disk
+   * space.  YCbCr is the most common JPEG colorspace, and YCbCr JPEG images
+   * can be compressed from and decompressed to any of the extended RGB pixel
+   * formats or grayscale, or they can be decompressed to YUV planar images.
+   */
+  TJCS_YCbCr,
+  /**
+   * Grayscale colorspace.  The JPEG image retains only the luminance data (Y
+   * component), and any color data from the source image is discarded.
+   * Grayscale JPEG images can be compressed from and decompressed to any of
+   * the extended RGB pixel formats or grayscale, or they can be decompressed
+   * to YUV planar images.
+   */
+  TJCS_GRAY,
+  /**
+   * CMYK colorspace.  When compressing the JPEG image, the C, M, Y, and K
+   * components in the source image are reordered into image planes, but no
+   * colorspace conversion or subsampling is performed.  CMYK JPEG images can
+   * only be decompressed to CMYK pixels.
+   */
+  TJCS_CMYK,
+  /**
+   * YCCK colorspace.  YCCK (AKA "YCbCrK") is not an absolute colorspace but
+   * rather a mathematical transformation of CMYK designed solely for storage
+   * and transmission.  It is to CMYK as YCbCr is to RGB.  CMYK pixels can be
+   * reversibly transformed into YCCK, and as with YCbCr, the chrominance
+   * components in the YCCK pixels can be subsampled without incurring major
+   * perceptual loss.  YCCK JPEG images can only be compressed from and
+   * decompressed to CMYK pixels.
+   */
+  TJCS_YCCK
+};
+
+
 /**
- * Turn off CPU auto-detection and force TurboJPEG to use SSE3 code (if the
- * underlying codec supports it.)
+ * The uncompressed source/destination image is stored in bottom-up (Windows,
+ * OpenGL) order, not top-down (X11) order.
  */
-#define TJFLAG_FORCESSE3     128
+#define TJFLAG_BOTTOMUP        2
 /**
  * When decompressing an image that was compressed using chrominance
  * subsampling, use the fastest chrominance upsampling algorithm available in
@@ -449,26 +548,29 @@ typedef struct tjtransform
    * to be applied in the frequency domain.
    *
    * @param coeffs pointer to an array of transformed DCT coefficients.  (NOTE:
-   *        this pointer is not guaranteed to be valid once the callback
-   *        returns, so applications wishing to hand off the DCT coefficients
-   *        to another function or library should make a copy of them within
-   *        the body of the callback.)
+   * this pointer is not guaranteed to be valid once the callback returns, so
+   * applications wishing to hand off the DCT coefficients to another function
+   * or library should make a copy of them within the body of the callback.)
+   *
    * @param arrayRegion #tjregion structure containing the width and height of
-   *        the array pointed to by <tt>coeffs</tt> as well as its offset
-   *        relative to the component plane.  TurboJPEG implementations may
-   *        choose to split each component plane into multiple DCT coefficient
-   *        arrays and call the callback function once for each array.
+   * the array pointed to by <tt>coeffs</tt> as well as its offset relative to
+   * the component plane.  TurboJPEG implementations may choose to split each
+   * component plane into multiple DCT coefficient arrays and call the callback
+   * function once for each array.
+   *
    * @param planeRegion #tjregion structure containing the width and height of
-   *        the component plane to which <tt>coeffs</tt> belongs
+   * the component plane to which <tt>coeffs</tt> belongs
+   *
    * @param componentID ID number of the component plane to which
-   *        <tt>coeffs</tt> belongs (Y, Cb, and Cr have, respectively, ID's of
-   *        0, 1, and 2 in typical JPEG images.)
+   * <tt>coeffs</tt> belongs (Y, Cb, and Cr have, respectively, ID's of 0, 1,
+   * and 2 in typical JPEG images.)
+   *
    * @param transformID ID number of the transformed image to which
-   *        <tt>coeffs</tt> belongs.  This is the same as the index of the
-   *        transform in the <tt>transforms</tt> array that was passed to
-   *        #tjTransform().
+   * <tt>coeffs</tt> belongs.  This is the same as the index of the transform
+   * in the <tt>transforms</tt> array that was passed to #tjTransform().
+   *
    * @param transform a pointer to a #tjtransform structure that specifies the
-   *        parameters and/or cropping region for this transform
+   * parameters and/or cropping region for this transform
    *
    * @return 0 if the callback was successful, or -1 if an error occurred.
    */
@@ -491,7 +593,7 @@ typedef void* tjhandle;
 /**
  * Compute the scaled value of <tt>dimension</tt> using the given scaling
  * factor.  This macro performs the integer equivalent of <tt>ceil(dimension *
- * scalingFactor)</tt>. 
+ * scalingFactor)</tt>.
  */
 #define TJSCALED(dimension, scalingFactor) ((dimension * scalingFactor.num \
   + scalingFactor.denom - 1) / scalingFactor.denom)
@@ -512,58 +614,205 @@ DLLEXPORT tjhandle DLLCALL tjInitCompress(void);
 
 
 /**
- * Compress an RGB or grayscale image into a JPEG image.
+ * Compress an RGB, grayscale, or CMYK image into a JPEG image.
  *
  * @param handle a handle to a TurboJPEG compressor or transformer instance
- * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels
- *        to be compressed
+ *
+ * @param srcBuf pointer to an image buffer containing RGB, grayscale, or
+ * CMYK pixels to be compressed
+ *
  * @param width width (in pixels) of the source image
- * @param pitch bytes per line of the source image.  Normally, this should be
- *        <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded,
- *        or <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of
- *        the image is padded to the nearest 32-bit boundary, as is the case
- *        for Windows bitmaps.  You can also be clever and use this parameter
- *        to skip lines, etc.  Setting this parameter to 0 is the equivalent of
- *        setting it to <tt>width * #tjPixelSize[pixelFormat]</tt>.
+ *
+ * @param pitch bytes per line in the source image.  Normally, this should be
+ * <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded, or
+ * <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of the image
+ * is padded to the nearest 32-bit boundary, as is the case for Windows
+ * bitmaps.  You can also be clever and use this parameter to skip lines, etc.
+ * Setting this parameter to 0 is the equivalent of setting it to
+ * <tt>width * #tjPixelSize[pixelFormat]</tt>.
+ *
  * @param height height (in pixels) of the source image
+ *
  * @param pixelFormat pixel format of the source image (see @ref TJPF
- *        "Pixel formats".)
+ * "Pixel formats".)
+ *
  * @param jpegBuf address of a pointer to an image buffer that will receive the
- *        JPEG image.  TurboJPEG has the ability to reallocate the JPEG buffer
- *        to accommodate the size of the JPEG image.  Thus, you can choose to:
- *        -# pre-allocate the JPEG buffer with an arbitrary size using
- *        #tjAlloc() and let TurboJPEG grow the buffer as needed,
- *        -# set <tt>*jpegBuf</tt> to NULL to tell TurboJPEG to allocate the
- *        buffer for you, or
- *        -# pre-allocate the buffer to a "worst case" size determined by
- *        calling #tjBufSize().  This should ensure that the buffer never has
- *        to be re-allocated (setting #TJFLAG_NOREALLOC guarantees this.)
- *        .
- *        If you choose option 1, <tt>*jpegSize</tt> should be set to the
- *        size of your pre-allocated buffer.  In any case, unless you have
- *        set #TJFLAG_NOREALLOC, you should always check <tt>*jpegBuf</tt> upon
- *        return from this function, as it may have changed.
+ * JPEG image.  TurboJPEG has the ability to reallocate the JPEG buffer
+ * to accommodate the size of the JPEG image.  Thus, you can choose to:
+ * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
+ * let TurboJPEG grow the buffer as needed,
+ * -# set <tt>*jpegBuf</tt> to NULL to tell TurboJPEG to allocate the buffer
+ * for you, or
+ * -# pre-allocate the buffer to a "worst case" size determined by calling
+ * #tjBufSize().  This should ensure that the buffer never has to be
+ * re-allocated (setting #TJFLAG_NOREALLOC guarantees this.)
+ * .
+ * If you choose option 1, <tt>*jpegSize</tt> should be set to the size of your
+ * pre-allocated buffer.  In any case, unless you have set #TJFLAG_NOREALLOC,
+ * you should always check <tt>*jpegBuf</tt> upon return from this function, as
+ * it may have changed.
+ *
  * @param jpegSize pointer to an unsigned long variable that holds the size of
- *        the JPEG image buffer.  If <tt>*jpegBuf</tt> points to a
- *        pre-allocated buffer, then <tt>*jpegSize</tt> should be set to the
- *        size of the buffer.  Upon return, <tt>*jpegSize</tt> will contain the
- *        size of the JPEG image (in bytes.)
+ * the JPEG image buffer.  If <tt>*jpegBuf</tt> points to a pre-allocated
+ * buffer, then <tt>*jpegSize</tt> should be set to the size of the buffer.
+ * Upon return, <tt>*jpegSize</tt> will contain the size of the JPEG image (in
+ * bytes.)  If <tt>*jpegBuf</tt> points to a JPEG image buffer that is being
+ * reused from a previous call to one of the JPEG compression functions, then
+ * <tt>*jpegSize</tt> is ignored.
+ *
  * @param jpegSubsamp the level of chrominance subsampling to be used when
- *        generating the JPEG image (see @ref TJSAMP
- *        "Chrominance subsampling options".)
+ * generating the JPEG image (see @ref TJSAMP
+ * "Chrominance subsampling options".)
+ *
  * @param jpegQual the image quality of the generated JPEG image (1 = worst,
-          100 = best)
+ * 100 = best)
+ *
  * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
- *        "flags".
+ * "flags"
  *
  * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
-DLLEXPORT int DLLCALL tjCompress2(tjhandle handle, unsigned char *srcBuf,
+DLLEXPORT int DLLCALL tjCompress2(tjhandle handle, const unsigned char *srcBuf,
   int width, int pitch, int height, int pixelFormat, unsigned char **jpegBuf,
   unsigned long *jpegSize, int jpegSubsamp, int jpegQual, int flags);
 
 
 /**
+ * Compress a YUV planar image into a JPEG image.
+ *
+ * @param handle a handle to a TurboJPEG compressor or transformer instance
+ *
+ * @param srcBuf pointer to an image buffer containing a YUV planar image to be
+ * compressed.  The size of this buffer should match the value returned by
+ * #tjBufSizeYUV2() for the given image width, height, padding, and level of
+ * chrominance subsampling.  The Y, U (Cb), and V (Cr) image planes should be
+ * stored sequentially in the source buffer (refer to @ref YUVnotes
+ * "YUV Image Format Notes".)
+ *
+ * @param width width (in pixels) of the source image.  If the width is not an
+ * even multiple of the MCU block width (see #tjMCUWidth), then an intermediate
+ * buffer copy will be performed within TurboJPEG.
+ *
+ * @param pad the line padding used in the source image.  For instance, if each
+ * line in each plane of the YUV image is padded to the nearest multiple of 4
+ * bytes, then <tt>pad</tt> should be set to 4.
+ *
+ * @param height height (in pixels) of the source image.  If the height is not
+ * an even multiple of the MCU block height (see #tjMCUHeight), then an
+ * intermediate buffer copy will be performed within TurboJPEG.
+ *
+ * @param subsamp the level of chrominance subsampling used in the source
+ * image (see @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @param jpegBuf address of a pointer to an image buffer that will receive the
+ * JPEG image.  TurboJPEG has the ability to reallocate the JPEG buffer to
+ * accommodate the size of the JPEG image.  Thus, you can choose to:
+ * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
+ * let TurboJPEG grow the buffer as needed,
+ * -# set <tt>*jpegBuf</tt> to NULL to tell TurboJPEG to allocate the buffer
+ * for you, or
+ * -# pre-allocate the buffer to a "worst case" size determined by calling
+ * #tjBufSize().  This should ensure that the buffer never has to be
+ * re-allocated (setting #TJFLAG_NOREALLOC guarantees this.)
+ * .
+ * If you choose option 1, <tt>*jpegSize</tt> should be set to the size of your
+ * pre-allocated buffer.  In any case, unless you have set #TJFLAG_NOREALLOC,
+ * you should always check <tt>*jpegBuf</tt> upon return from this function, as
+ * it may have changed.
+ *
+ * @param jpegSize pointer to an unsigned long variable that holds the size of
+ * the JPEG image buffer.  If <tt>*jpegBuf</tt> points to a pre-allocated
+ * buffer, then <tt>*jpegSize</tt> should be set to the size of the buffer.
+ * Upon return, <tt>*jpegSize</tt> will contain the size of the JPEG image (in
+ * bytes.)  If <tt>*jpegBuf</tt> points to a JPEG image buffer that is being
+ * reused from a previous call to one of the JPEG compression functions, then
+ * <tt>*jpegSize</tt> is ignored.
+ *
+ * @param jpegQual the image quality of the generated JPEG image (1 = worst,
+ * 100 = best)
+ *
+ * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
+ * "flags"
+ *
+ * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
+*/
+DLLEXPORT int DLLCALL tjCompressFromYUV(tjhandle handle,
+  const unsigned char *srcBuf, int width, int pad, int height, int subsamp,
+  unsigned char **jpegBuf, unsigned long *jpegSize, int jpegQual, int flags);
+
+
+/**
+ * Compress a set of Y, U (Cb), and V (Cr) image planes into a JPEG image.
+ *
+ * @param handle a handle to a TurboJPEG compressor or transformer instance
+ *
+ * @param srcPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
+ * (or just a Y plane, if compressing a grayscale image) that contain a YUV
+ * image to be compressed.  These planes can be contiguous or non-contiguous in
+ * memory.  The size of each plane should match the value returned by
+ * #tjPlaneSizeYUV() for the given image width, height, strides, and level of
+ * chrominance subsampling.  Refer to @ref YUVnotes "YUV Image Format Notes"
+ * for more details.
+ *
+ * @param width width (in pixels) of the source image.  If the width is not an
+ * even multiple of the MCU block width (see #tjMCUWidth), then an intermediate
+ * buffer copy will be performed within TurboJPEG.
+ *
+ * @param strides an array of integers, each specifying the number of bytes per
+ * line in the corresponding plane of the YUV source image.  Setting the stride
+ * for any plane to 0 is the same as setting it to the plane width (see
+ * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
+ * the strides for all planes will be set to their respective plane widths.
+ * You can adjust the strides in order to specify an arbitrary amount of line
+ * padding in each plane or to create a JPEG image from a subregion of a larger
+ * YUV planar image.
+ *
+ * @param height height (in pixels) of the source image.  If the height is not
+ * an even multiple of the MCU block height (see #tjMCUHeight), then an
+ * intermediate buffer copy will be performed within TurboJPEG.
+ *
+ * @param subsamp the level of chrominance subsampling used in the source
+ * image (see @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @param jpegBuf address of a pointer to an image buffer that will receive the
+ * JPEG image.  TurboJPEG has the ability to reallocate the JPEG buffer to
+ * accommodate the size of the JPEG image.  Thus, you can choose to:
+ * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
+ * let TurboJPEG grow the buffer as needed,
+ * -# set <tt>*jpegBuf</tt> to NULL to tell TurboJPEG to allocate the buffer
+ * for you, or
+ * -# pre-allocate the buffer to a "worst case" size determined by calling
+ * #tjBufSize().  This should ensure that the buffer never has to be
+ * re-allocated (setting #TJFLAG_NOREALLOC guarantees this.)
+ * .
+ * If you choose option 1, <tt>*jpegSize</tt> should be set to the size of your
+ * pre-allocated buffer.  In any case, unless you have set #TJFLAG_NOREALLOC,
+ * you should always check <tt>*jpegBuf</tt> upon return from this function, as
+ * it may have changed.
+ *
+ * @param jpegSize pointer to an unsigned long variable that holds the size of
+ * the JPEG image buffer.  If <tt>*jpegBuf</tt> points to a pre-allocated
+ * buffer, then <tt>*jpegSize</tt> should be set to the size of the buffer.
+ * Upon return, <tt>*jpegSize</tt> will contain the size of the JPEG image (in
+ * bytes.)  If <tt>*jpegBuf</tt> points to a JPEG image buffer that is being
+ * reused from a previous call to one of the JPEG compression functions, then
+ * <tt>*jpegSize</tt> is ignored.
+ *
+ * @param jpegQual the image quality of the generated JPEG image (1 = worst,
+ * 100 = best)
+ *
+ * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
+ * "flags"
+ *
+ * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
+*/
+DLLEXPORT int DLLCALL tjCompressFromYUVPlanes(tjhandle handle,
+  const unsigned char **srcPlanes, int width, const int *strides, int height,
+  int subsamp, unsigned char **jpegBuf, unsigned long *jpegSize, int jpegQual,
+  int flags);
+
+
+/**
  * The maximum size of the buffer (in bytes) required to hold a JPEG image with
  * the given parameters.  The number of bytes returned by this function is
  * larger than the size of the uncompressed source image.  The reason for this
@@ -574,11 +823,13 @@ DLLEXPORT int DLLCALL tjCompress2(tjhandle handle, unsigned char *srcBuf,
  * size of a JPEG image prior to compression, the corner case has to be
  * handled.
  *
- * @param width width of the image (in pixels)
- * @param height height of the image (in pixels)
+ * @param width width (in pixels) of the image
+ *
+ * @param height height (in pixels) of the image
+ *
  * @param jpegSubsamp the level of chrominance subsampling to be used when
- *        generating the JPEG image (see @ref TJSAMP
- *        "Chrominance subsampling options".)
+ * generating the JPEG image (see @ref TJSAMP
+ * "Chrominance subsampling options".)
  *
  * @return the maximum size of the buffer (in bytes) required to hold the
  * image, or -1 if the arguments are out of bounds.
@@ -591,64 +842,192 @@ DLLEXPORT unsigned long DLLCALL tjBufSize(int width, int height,
  * The size of the buffer (in bytes) required to hold a YUV planar image with
  * the given parameters.
  *
- * @param width width of the image (in pixels)
- * @param height height of the image (in pixels)
+ * @param width width (in pixels) of the image
+ *
+ * @param pad the width of each line in each plane of the image is padded to
+ * the nearest multiple of this number of bytes (must be a power of 2.)
+ *
+ * @param height height (in pixels) of the image
+ *
  * @param subsamp level of chrominance subsampling in the image (see
- *        @ref TJSAMP "Chrominance subsampling options".)
+ * @ref TJSAMP "Chrominance subsampling options".)
  *
  * @return the size of the buffer (in bytes) required to hold the image, or
  * -1 if the arguments are out of bounds.
  */
-DLLEXPORT unsigned long DLLCALL tjBufSizeYUV(int width, int height,
+DLLEXPORT unsigned long DLLCALL tjBufSizeYUV2(int width, int pad, int height,
   int subsamp);
 
 
 /**
+ * The size of the buffer (in bytes) required to hold a YUV image plane with
+ * the given parameters.
+ *
+ * @param componentID ID number of the image plane (0 = Y, 1 = U/Cb, 2 = V/Cr)
+ *
+ * @param width width (in pixels) of the YUV image.  NOTE: this is the width of
+ * the whole image, not the plane width.
+ *
+ * @param stride bytes per line in the image plane.  Setting this to 0 is the
+ * equivalent of setting it to the plane width.
+ *
+ * @param height height (in pixels) of the YUV image.  NOTE: this is the height
+ * of the whole image, not the plane height.
+ *
+ * @param subsamp level of chrominance subsampling in the image (see
+ * @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @return the size of the buffer (in bytes) required to hold the YUV image
+ * plane, or -1 if the arguments are out of bounds.
+ */
+DLLEXPORT unsigned long DLLCALL tjPlaneSizeYUV(int componentID, int width,
+  int stride, int height, int subsamp);
+
+
+/**
+ * The plane width of a YUV image plane with the given parameters.  Refer to
+ * @ref YUVnotes "YUV Image Format Notes" for a description of plane width.
+ *
+ * @param componentID ID number of the image plane (0 = Y, 1 = U/Cb, 2 = V/Cr)
+ *
+ * @param width width (in pixels) of the YUV image
+ *
+ * @param subsamp level of chrominance subsampling in the image (see
+ * @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @return the plane width of a YUV image plane with the given parameters, or
+ * -1 if the arguments are out of bounds.
+ */
+DLLEXPORT int tjPlaneWidth(int componentID, int width, int subsamp);
+
+
+/**
+ * The plane height of a YUV image plane with the given parameters.  Refer to
+ * @ref YUVnotes "YUV Image Format Notes" for a description of plane height.
+ *
+ * @param componentID ID number of the image plane (0 = Y, 1 = U/Cb, 2 = V/Cr)
+ *
+ * @param height height (in pixels) of the YUV image
+ *
+ * @param subsamp level of chrominance subsampling in the image (see
+ * @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @return the plane height of a YUV image plane with the given parameters, or
+ * -1 if the arguments are out of bounds.
+ */
+DLLEXPORT int tjPlaneHeight(int componentID, int height, int subsamp);
+
+
+/**
  * Encode an RGB or grayscale image into a YUV planar image.  This function
- * uses the accelerated color conversion routines in TurboJPEG's underlying
- * codec to produce a planar YUV image that is suitable for X Video.
- * Specifically, if the chrominance components are subsampled along the
- * horizontal dimension, then the width of the luminance plane is padded to the
- * nearest multiple of 2 in the output image (same goes for the height of the
- * luminance plane, if the chrominance components are subsampled along the
- * vertical dimension.)  Also, each line of each plane in the output image is
- * padded to 4 bytes.  Although this will work with any subsampling option, it
- * is really only useful in combination with TJ_420, which produces an image
- * compatible with the I420 (AKA "YUV420P") format.
- * <p>
- * NOTE: Technically, the JPEG format uses the YCbCr colorspace, but per the
- * convention of the digital video community, the TurboJPEG API uses "YUV" to
- * refer to an image format consisting of Y, Cb, and Cr image planes.
+ * uses the accelerated color conversion routines in the underlying
+ * codec but does not execute any of the other steps in the JPEG compression
+ * process.
  *
  * @param handle a handle to a TurboJPEG compressor or transformer instance
+ *
  * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels
- *        to be encoded
+ * to be encoded
+ *
  * @param width width (in pixels) of the source image
- * @param pitch bytes per line of the source image.  Normally, this should be
- *        <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded,
- *        or <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of
- *        the image is padded to the nearest 32-bit boundary, as is the case
- *        for Windows bitmaps.  You can also be clever and use this parameter
- *        to skip lines, etc.  Setting this parameter to 0 is the equivalent of
- *        setting it to <tt>width * #tjPixelSize[pixelFormat]</tt>.
+ *
+ * @param pitch bytes per line in the source image.  Normally, this should be
+ * <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded, or
+ * <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of the image
+ * is padded to the nearest 32-bit boundary, as is the case for Windows
+ * bitmaps.  You can also be clever and use this parameter to skip lines, etc.
+ * Setting this parameter to 0 is the equivalent of setting it to
+ * <tt>width * #tjPixelSize[pixelFormat]</tt>.
+ *
  * @param height height (in pixels) of the source image
+ *
  * @param pixelFormat pixel format of the source image (see @ref TJPF
- *        "Pixel formats".)
+ * "Pixel formats".)
+ *
  * @param dstBuf pointer to an image buffer that will receive the YUV image.
- *        Use #tjBufSizeYUV() to determine the appropriate size for this buffer
- *        based on the image width, height, and level of chrominance
- *        subsampling.
+ * Use #tjBufSizeYUV2() to determine the appropriate size for this buffer based
+ * on the image width, height, padding, and level of chrominance subsampling.
+ * The Y, U (Cb), and V (Cr) image planes will be stored sequentially in the
+ * buffer (refer to @ref YUVnotes "YUV Image Format Notes".)
+ *
+ * @param pad the width of each line in each plane of the YUV image will be
+ * padded to the nearest multiple of this number of bytes (must be a power of
+ * 2.)  To generate images suitable for X Video, <tt>pad</tt> should be set to
+ * 4.
+ *
  * @param subsamp the level of chrominance subsampling to be used when
- *        generating the YUV image (see @ref TJSAMP
- *        "Chrominance subsampling options".)
+ * generating the YUV image (see @ref TJSAMP
+ * "Chrominance subsampling options".)  To generate images suitable for X
+ * Video, <tt>subsamp</tt> should be set to @ref TJSAMP_420.  This produces an
+ * image compatible with the I420 (AKA "YUV420P") format.
+ *
  * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
- *        "flags".
+ * "flags"
  *
  * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
-DLLEXPORT int DLLCALL tjEncodeYUV2(tjhandle handle,
-  unsigned char *srcBuf, int width, int pitch, int height, int pixelFormat,
-  unsigned char *dstBuf, int subsamp, int flags);
+DLLEXPORT int DLLCALL tjEncodeYUV3(tjhandle handle,
+  const unsigned char *srcBuf, int width, int pitch, int height,
+  int pixelFormat, unsigned char *dstBuf, int pad, int subsamp, int flags);
+
+
+/**
+ * Encode an RGB or grayscale image into separate Y, U (Cb), and V (Cr) image
+ * planes.  This function uses the accelerated color conversion routines in the
+ * underlying codec but does not execute any of the other steps in the JPEG
+ * compression process.
+ *
+ * @param handle a handle to a TurboJPEG compressor or transformer instance
+ *
+ * @param srcBuf pointer to an image buffer containing RGB or grayscale pixels
+ * to be encoded
+ *
+ * @param width width (in pixels) of the source image
+ *
+ * @param pitch bytes per line in the source image.  Normally, this should be
+ * <tt>width * #tjPixelSize[pixelFormat]</tt> if the image is unpadded, or
+ * <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line of the image
+ * is padded to the nearest 32-bit boundary, as is the case for Windows
+ * bitmaps.  You can also be clever and use this parameter to skip lines, etc.
+ * Setting this parameter to 0 is the equivalent of setting it to
+ * <tt>width * #tjPixelSize[pixelFormat]</tt>.
+ *
+ * @param height height (in pixels) of the source image
+ *
+ * @param pixelFormat pixel format of the source image (see @ref TJPF
+ * "Pixel formats".)
+ *
+ * @param dstPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
+ * (or just a Y plane, if generating a grayscale image) that will receive the
+ * encoded image.  These planes can be contiguous or non-contiguous in memory.
+ * Use #tjPlaneSizeYUV() to determine the appropriate size for each plane based
+ * on the image width, height, strides, and level of chrominance subsampling.
+ * Refer to @ref YUVnotes "YUV Image Format Notes" for more details.
+ *
+ * @param strides an array of integers, each specifying the number of bytes per
+ * line in the corresponding plane of the output image.  Setting the stride for
+ * any plane to 0 is the same as setting it to the plane width (see
+ * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
+ * the strides for all planes will be set to their respective plane widths.
+ * You can adjust the strides in order to add an arbitrary amount of line
+ * padding to each plane or to encode an RGB or grayscale image into a
+ * subregion of a larger YUV planar image.
+ *
+ * @param subsamp the level of chrominance subsampling to be used when
+ * generating the YUV image (see @ref TJSAMP
+ * "Chrominance subsampling options".)  To generate images suitable for X
+ * Video, <tt>subsamp</tt> should be set to @ref TJSAMP_420.  This produces an
+ * image compatible with the I420 (AKA "YUV420P") format.
+ *
+ * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
+ * "flags"
+ *
+ * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
+*/
+DLLEXPORT int DLLCALL tjEncodeYUVPlanes(tjhandle handle,
+  const unsigned char *srcBuf, int width, int pitch, int height,
+  int pixelFormat, unsigned char **dstPlanes, int *strides, int subsamp,
+  int flags);
 
 
 /**
@@ -664,21 +1043,30 @@ DLLEXPORT tjhandle DLLCALL tjInitDecompress(void);
  * Retrieve information about a JPEG image without decompressing it.
  *
  * @param handle a handle to a TurboJPEG decompressor or transformer instance
+ *
  * @param jpegBuf pointer to a buffer containing a JPEG image
+ *
  * @param jpegSize size of the JPEG image (in bytes)
+ *
  * @param width pointer to an integer variable that will receive the width (in
- *        pixels) of the JPEG image
+ * pixels) of the JPEG image
+ *
  * @param height pointer to an integer variable that will receive the height
- *        (in pixels) of the JPEG image
+ * (in pixels) of the JPEG image
+ *
  * @param jpegSubsamp pointer to an integer variable that will receive the
- *        level of chrominance subsampling used when compressing the JPEG image
- *        (see @ref TJSAMP "Chrominance subsampling options".)
+ * level of chrominance subsampling used when the JPEG image was compressed
+ * (see @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @param jpegColorspace pointer to an integer variable that will receive one
+ * of the JPEG colorspace constants, indicating the colorspace of the JPEG
+ * image (see @ref TJCS "JPEG colorspaces".)
  *
  * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
 */
-DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle handle,
-  unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height,
-  int *jpegSubsamp);
+DLLEXPORT int DLLCALL tjDecompressHeader3(tjhandle handle,
+  const unsigned char *jpegBuf, unsigned long jpegSize, int *width,
+  int *height, int *jpegSubsamp, int *jpegColorspace);
 
 
 /**
@@ -686,7 +1074,7 @@ DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle handle,
  * this implementation of TurboJPEG supports.
  *
  * @param numscalingfactors pointer to an integer variable that will receive
- *        the number of elements in the list
+ * the number of elements in the list
  *
  * @return a pointer to a list of fractional scaling factors, or NULL if an
  * error is encountered (see #tjGetErrorStr().)
@@ -695,79 +1083,272 @@ DLLEXPORT tjscalingfactor* DLLCALL tjGetScalingFactors(int *numscalingfactors);
 
 
 /**
- * Decompress a JPEG image to an RGB or grayscale image.
+ * Decompress a JPEG image to an RGB, grayscale, or CMYK image.
  *
  * @param handle a handle to a TurboJPEG decompressor or transformer instance
+ *
  * @param jpegBuf pointer to a buffer containing the JPEG image to decompress
+ *
  * @param jpegSize size of the JPEG image (in bytes)
+ *
  * @param dstBuf pointer to an image buffer that will receive the decompressed
- *        image.  This buffer should normally be <tt>pitch * scaledHeight</tt>
- *        bytes in size, where <tt>scaledHeight</tt> can be determined by
- *        calling #TJSCALED() with the JPEG image height and one of the scaling
- *        factors returned by #tjGetScalingFactors().  The <tt>dstBuf</tt>
- *        pointer may also be used to decompress into a specific region of a
- *        larger buffer.
+ * image.  This buffer should normally be <tt>pitch * scaledHeight</tt> bytes
+ * in size, where <tt>scaledHeight</tt> can be determined by calling
+ * #TJSCALED() with the JPEG image height and one of the scaling factors
+ * returned by #tjGetScalingFactors().  The <tt>dstBuf</tt> pointer may also be
+ * used to decompress into a specific region of a larger buffer.
+ *
  * @param width desired width (in pixels) of the destination image.  If this is
- *        different than the width of the JPEG image being decompressed, then
- *        TurboJPEG will use scaling in the JPEG decompressor to generate the
- *        largest possible image that will fit within the desired width.  If
- *        <tt>width</tt> is set to 0, then only the height will be considered
- *        when determining the scaled image size.
- * @param pitch bytes per line of the destination image.  Normally, this is
- *        <tt>scaledWidth * #tjPixelSize[pixelFormat]</tt> if the decompressed
- *        image is unpadded, else <tt>#TJPAD(scaledWidth *
- *        #tjPixelSize[pixelFormat])</tt> if each line of the decompressed
- *        image is padded to the nearest 32-bit boundary, as is the case for
- *        Windows bitmaps.  (NOTE: <tt>scaledWidth</tt> can be determined by
- *        calling #TJSCALED() with the JPEG image width and one of the scaling
- *        factors returned by #tjGetScalingFactors().)  You can also be clever
- *        and use the pitch parameter to skip lines, etc.  Setting this
- *        parameter to 0 is the equivalent of setting it to <tt>scaledWidth
- *        * #tjPixelSize[pixelFormat]</tt>.
+ * different than the width of the JPEG image being decompressed, then
+ * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
+ * possible image that will fit within the desired width.  If <tt>width</tt> is
+ * set to 0, then only the height will be considered when determining the
+ * scaled image size.
+ *
+ * @param pitch bytes per line in the destination image.  Normally, this is
+ * <tt>scaledWidth * #tjPixelSize[pixelFormat]</tt> if the decompressed image
+ * is unpadded, else <tt>#TJPAD(scaledWidth * #tjPixelSize[pixelFormat])</tt>
+ * if each line of the decompressed image is padded to the nearest 32-bit
+ * boundary, as is the case for Windows bitmaps.  (NOTE: <tt>scaledWidth</tt>
+ * can be determined by calling #TJSCALED() with the JPEG image width and one
+ * of the scaling factors returned by #tjGetScalingFactors().)  You can also be
+ * clever and use the pitch parameter to skip lines, etc.  Setting this
+ * parameter to 0 is the equivalent of setting it to
+ * <tt>scaledWidth * #tjPixelSize[pixelFormat]</tt>.
+ *
  * @param height desired height (in pixels) of the destination image.  If this
- *        is different than the height of the JPEG image being decompressed,
- *        then TurboJPEG will use scaling in the JPEG decompressor to generate
- *        the largest possible image that will fit within the desired height.
- *        If <tt>height</tt> is set to 0, then only the width will be
- *        considered when determining the scaled image size.
+ * is different than the height of the JPEG image being decompressed, then
+ * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
+ * possible image that will fit within the desired height.  If <tt>height</tt>
+ * is set to 0, then only the width will be considered when determining the
+ * scaled image size.
+ *
  * @param pixelFormat pixel format of the destination image (see @ref
- *        TJPF "Pixel formats".)
+ * TJPF "Pixel formats".)
+ *
  * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
- *        "flags".
+ * "flags"
  *
  * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
  */
 DLLEXPORT int DLLCALL tjDecompress2(tjhandle handle,
-  unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
+  const unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
   int width, int pitch, int height, int pixelFormat, int flags);
 
 
 /**
  * Decompress a JPEG image to a YUV planar image.  This function performs JPEG
  * decompression but leaves out the color conversion step, so a planar YUV
- * image is generated instead of an RGB image.  The padding of the planes in
- * this image is the same as in the images generated by #tjEncodeYUV2().  Note
- * that, if the width or height of the image is not an even multiple of the MCU
- * block size (see #tjMCUWidth and #tjMCUHeight), then an intermediate buffer
- * copy will be performed within TurboJPEG.
- * <p>
- * NOTE: Technically, the JPEG format uses the YCbCr colorspace, but per the
- * convention of the digital video community, the TurboJPEG API uses "YUV" to
- * refer to an image format consisting of Y, Cb, and Cr image planes.
+ * image is generated instead of an RGB image.
  *
  * @param handle a handle to a TurboJPEG decompressor or transformer instance
+ *
  * @param jpegBuf pointer to a buffer containing the JPEG image to decompress
+ *
  * @param jpegSize size of the JPEG image (in bytes)
+ *
  * @param dstBuf pointer to an image buffer that will receive the YUV image.
- *        Use #tjBufSizeYUV() to determine the appropriate size for this buffer
- *        based on the image width, height, and level of subsampling.
+ * Use #tjBufSizeYUV2() to determine the appropriate size for this buffer based
+ * on the image width, height, padding, and level of subsampling.  The Y,
+ * U (Cb), and V (Cr) image planes will be stored sequentially in the buffer
+ * (refer to @ref YUVnotes "YUV Image Format Notes".)
+ *
+ * @param width desired width (in pixels) of the YUV image.  If this is
+ * different than the width of the JPEG image being decompressed, then
+ * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
+ * possible image that will fit within the desired width.  If <tt>width</tt> is
+ * set to 0, then only the height will be considered when determining the
+ * scaled image size.  If the scaled width is not an even multiple of the MCU
+ * block width (see #tjMCUWidth), then an intermediate buffer copy will be
+ * performed within TurboJPEG.
+ *
+ * @param pad the width of each line in each plane of the YUV image will be
+ * padded to the nearest multiple of this number of bytes (must be a power of
+ * 2.)  To generate images suitable for X Video, <tt>pad</tt> should be set to
+ * 4.
+ *
+ * @param height desired height (in pixels) of the YUV image.  If this is
+ * different than the height of the JPEG image being decompressed, then
+ * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
+ * possible image that will fit within the desired height.  If <tt>height</tt>
+ * is set to 0, then only the width will be considered when determining the
+ * scaled image size.  If the scaled height is not an even multiple of the MCU
+ * block height (see #tjMCUHeight), then an intermediate buffer copy will be
+ * performed within TurboJPEG.
+ *
  * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
- *        "flags".
+ * "flags"
  *
  * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
  */
-DLLEXPORT int DLLCALL tjDecompressToYUV(tjhandle handle,
-  unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
+DLLEXPORT int DLLCALL tjDecompressToYUV2(tjhandle handle,
+  const unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
+  int width, int pad, int height, int flags);
+
+
+/**
+ * Decompress a JPEG image into separate Y, U (Cb), and V (Cr) image
+ * planes.  This function performs JPEG decompression but leaves out the color
+ * conversion step, so a planar YUV image is generated instead of an RGB image.
+ *
+ * @param handle a handle to a TurboJPEG decompressor or transformer instance
+ *
+ * @param jpegBuf pointer to a buffer containing the JPEG image to decompress
+ *
+ * @param jpegSize size of the JPEG image (in bytes)
+ *
+ * @param dstPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
+ * (or just a Y plane, if decompressing a grayscale image) that will receive
+ * the YUV image.  These planes can be contiguous or non-contiguous in memory.
+ * Use #tjPlaneSizeYUV() to determine the appropriate size for each plane based
+ * on the scaled image width, scaled image height, strides, and level of
+ * chrominance subsampling.  Refer to @ref YUVnotes "YUV Image Format Notes"
+ * for more details.
+ *
+ * @param width desired width (in pixels) of the YUV image.  If this is
+ * different than the width of the JPEG image being decompressed, then
+ * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
+ * possible image that will fit within the desired width.  If <tt>width</tt> is
+ * set to 0, then only the height will be considered when determining the
+ * scaled image size.  If the scaled width is not an even multiple of the MCU
+ * block width (see #tjMCUWidth), then an intermediate buffer copy will be
+ * performed within TurboJPEG.
+ *
+ * @param strides an array of integers, each specifying the number of bytes per
+ * line in the corresponding plane of the output image.  Setting the stride for
+ * any plane to 0 is the same as setting it to the scaled plane width (see
+ * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
+ * the strides for all planes will be set to their respective scaled plane
+ * widths.  You can adjust the strides in order to add an arbitrary amount of
+ * line padding to each plane or to decompress the JPEG image into a subregion
+ * of a larger YUV planar image.
+ *
+ * @param height desired height (in pixels) of the YUV image.  If this is
+ * different than the height of the JPEG image being decompressed, then
+ * TurboJPEG will use scaling in the JPEG decompressor to generate the largest
+ * possible image that will fit within the desired height.  If <tt>height</tt>
+ * is set to 0, then only the width will be considered when determining the
+ * scaled image size.  If the scaled height is not an even multiple of the MCU
+ * block height (see #tjMCUHeight), then an intermediate buffer copy will be
+ * performed within TurboJPEG.
+ *
+ * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
+ * "flags"
+ *
+ * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
+ */
+DLLEXPORT int DLLCALL tjDecompressToYUVPlanes(tjhandle handle,
+  const unsigned char *jpegBuf, unsigned long jpegSize,
+  unsigned char **dstPlanes, int width, int *strides, int height, int flags);
+
+
+/**
+ * Decode a YUV planar image into an RGB or grayscale image.  This function
+ * uses the accelerated color conversion routines in the underlying
+ * codec but does not execute any of the other steps in the JPEG decompression
+ * process.
+ *
+ * @param handle a handle to a TurboJPEG decompressor or transformer instance
+ *
+ * @param srcBuf pointer to an image buffer containing a YUV planar image to be
+ * decoded.  The size of this buffer should match the value returned by
+ * #tjBufSizeYUV2() for the given image width, height, padding, and level of
+ * chrominance subsampling.  The Y, U (Cb), and V (Cr) image planes should be
+ * stored sequentially in the source buffer (refer to @ref YUVnotes
+ * "YUV Image Format Notes".)
+ *
+ * @param pad Use this parameter to specify that the width of each line in each
+ * plane of the YUV source image is padded to the nearest multiple of this
+ * number of bytes (must be a power of 2.)
+ *
+ * @param subsamp the level of chrominance subsampling used in the YUV source
+ * image (see @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @param dstBuf pointer to an image buffer that will receive the decoded
+ * image.  This buffer should normally be <tt>pitch * height</tt> bytes in
+ * size, but the <tt>dstBuf</tt> pointer can also be used to decode into a
+ * specific region of a larger buffer.
+ *
+ * @param width width (in pixels) of the source and destination images
+ *
+ * @param pitch bytes per line in the destination image.  Normally, this should
+ * be <tt>width * #tjPixelSize[pixelFormat]</tt> if the destination image is
+ * unpadded, or <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line
+ * of the destination image should be padded to the nearest 32-bit boundary, as
+ * is the case for Windows bitmaps.  You can also be clever and use the pitch
+ * parameter to skip lines, etc.  Setting this parameter to 0 is the equivalent
+ * of setting it to <tt>width * #tjPixelSize[pixelFormat]</tt>.
+ *
+ * @param height height (in pixels) of the source and destination images
+ *
+ * @param pixelFormat pixel format of the destination image (see @ref TJPF
+ * "Pixel formats".)
+ *
+ * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
+ * "flags"
+ *
+ * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
+ */
+DLLEXPORT int DLLCALL tjDecodeYUV(tjhandle handle, const unsigned char *srcBuf,
+  int pad, int subsamp, unsigned char *dstBuf, int width, int pitch,
+  int height, int pixelFormat, int flags);
+
+
+/**
+ * Decode a set of Y, U (Cb), and V (Cr) image planes into an RGB or grayscale
+ * image.  This function uses the accelerated color conversion routines in the
+ * underlying codec but does not execute any of the other steps in the JPEG
+ * decompression process.
+ *
+ * @param handle a handle to a TurboJPEG decompressor or transformer instance
+ *
+ * @param srcPlanes an array of pointers to Y, U (Cb), and V (Cr) image planes
+ * (or just a Y plane, if decoding a grayscale image) that contain a YUV image
+ * to be decoded.  These planes can be contiguous or non-contiguous in memory.
+ * The size of each plane should match the value returned by #tjPlaneSizeYUV()
+ * for the given image width, height, strides, and level of chrominance
+ * subsampling.  Refer to @ref YUVnotes "YUV Image Format Notes" for more
+ * details.
+ *
+ * @param strides an array of integers, each specifying the number of bytes per
+ * line in the corresponding plane of the YUV source image.  Setting the stride
+ * for any plane to 0 is the same as setting it to the plane width (see
+ * @ref YUVnotes "YUV Image Format Notes".)  If <tt>strides</tt> is NULL, then
+ * the strides for all planes will be set to their respective plane widths.
+ * You can adjust the strides in order to specify an arbitrary amount of line
+ * padding in each plane or to decode a subregion of a larger YUV planar image.
+ *
+ * @param subsamp the level of chrominance subsampling used in the YUV source
+ * image (see @ref TJSAMP "Chrominance subsampling options".)
+ *
+ * @param dstBuf pointer to an image buffer that will receive the decoded
+ * image.  This buffer should normally be <tt>pitch * height</tt> bytes in
+ * size, but the <tt>dstBuf</tt> pointer can also be used to decode into a
+ * specific region of a larger buffer.
+ *
+ * @param width width (in pixels) of the source and destination images
+ *
+ * @param pitch bytes per line in the destination image.  Normally, this should
+ * be <tt>width * #tjPixelSize[pixelFormat]</tt> if the destination image is
+ * unpadded, or <tt>#TJPAD(width * #tjPixelSize[pixelFormat])</tt> if each line
+ * of the destination image should be padded to the nearest 32-bit boundary, as
+ * is the case for Windows bitmaps.  You can also be clever and use the pitch
+ * parameter to skip lines, etc.  Setting this parameter to 0 is the equivalent
+ * of setting it to <tt>width * #tjPixelSize[pixelFormat]</tt>.
+ *
+ * @param height height (in pixels) of the source and destination images
+ *
+ * @param pixelFormat pixel format of the destination image (see @ref TJPF
+ * "Pixel formats".)
+ *
+ * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
+ * "flags"
+ *
+ * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
+ */
+DLLEXPORT int DLLCALL tjDecodeYUVPlanes(tjhandle handle,
+  const unsigned char **srcPlanes, const int *strides, int subsamp,
+  unsigned char *dstBuf, int width, int pitch, int height, int pixelFormat,
   int flags);
 
 
@@ -782,9 +1363,9 @@ DLLEXPORT tjhandle DLLCALL tjInitTransform(void);
 
 /**
  * Losslessly transform a JPEG image into another JPEG image.  Lossless
- * transforms work by moving the raw coefficients from one JPEG image structure
- * to another without altering the values of the coefficients.  While this is
- * typically faster than decompressing the image, transforming it, and
+ * transforms work by moving the raw DCT coefficients from one JPEG image
+ * structure to another without altering the values of the coefficients.  While
+ * this is typically faster than decompressing the image, transforming it, and
  * re-compressing it, lossless transforms are not free.  Each lossless
  * transform requires reading and performing Huffman decoding on all of the
  * coefficients in the source image, regardless of the size of the destination
@@ -794,51 +1375,58 @@ DLLEXPORT tjhandle DLLCALL tjInitTransform(void);
  * source coefficients multiple times.
  *
  * @param handle a handle to a TurboJPEG transformer instance
- * @param jpegBuf pointer to a buffer containing the JPEG image to transform
- * @param jpegSize size of the JPEG image (in bytes)
+ *
+ * @param jpegBuf pointer to a buffer containing the JPEG source image to
+ * transform
+ *
+ * @param jpegSize size of the JPEG source image (in bytes)
+ *
  * @param n the number of transformed JPEG images to generate
+ *
  * @param dstBufs pointer to an array of n image buffers.  <tt>dstBufs[i]</tt>
- *        will receive a JPEG image that has been transformed using the
- *        parameters in <tt>transforms[i]</tt>.  TurboJPEG has the ability to
- *        reallocate the JPEG buffer to accommodate the size of the JPEG image.
- *        Thus, you can choose to:
- *        -# pre-allocate the JPEG buffer with an arbitrary size using
- *        #tjAlloc() and let TurboJPEG grow the buffer as needed,
- *        -# set <tt>dstBufs[i]</tt> to NULL to tell TurboJPEG to allocate the
- *        buffer for you, or
- *        -# pre-allocate the buffer to a "worst case" size determined by
- *        calling #tjBufSize() with the transformed or cropped width and
- *        height.  This should ensure that the buffer never has to be
- *        re-allocated (setting #TJFLAG_NOREALLOC guarantees this.)
- *        .
- *        If you choose option 1, <tt>dstSizes[i]</tt> should be set to
- *        the size of your pre-allocated buffer.  In any case, unless you have
- *        set #TJFLAG_NOREALLOC, you should always check <tt>dstBufs[i]</tt>
- *        upon return from this function, as it may have changed.
+ * will receive a JPEG image that has been transformed using the parameters in
+ * <tt>transforms[i]</tt>.  TurboJPEG has the ability to reallocate the JPEG
+ * buffer to accommodate the size of the JPEG image.  Thus, you can choose to:
+ * -# pre-allocate the JPEG buffer with an arbitrary size using #tjAlloc() and
+ * let TurboJPEG grow the buffer as needed,
+ * -# set <tt>dstBufs[i]</tt> to NULL to tell TurboJPEG to allocate the buffer
+ * for you, or
+ * -# pre-allocate the buffer to a "worst case" size determined by calling
+ * #tjBufSize() with the transformed or cropped width and height.  This should
+ * ensure that the buffer never has to be re-allocated (setting
+ * #TJFLAG_NOREALLOC guarantees this.)
+ * .
+ * If you choose option 1, <tt>dstSizes[i]</tt> should be set to the size of
+ * your pre-allocated buffer.  In any case, unless you have set
+ * #TJFLAG_NOREALLOC, you should always check <tt>dstBufs[i]</tt> upon return
+ * from this function, as it may have changed.
+ *
  * @param dstSizes pointer to an array of n unsigned long variables that will
- *        receive the actual sizes (in bytes) of each transformed JPEG image.
- *        If <tt>dstBufs[i]</tt> points to a pre-allocated buffer, then
- *        <tt>dstSizes[i]</tt> should be set to the size of the buffer.  Upon
- *        return, <tt>dstSizes[i]</tt> will contain the size of the JPEG image
- *        (in bytes.)
+ * receive the actual sizes (in bytes) of each transformed JPEG image.  If
+ * <tt>dstBufs[i]</tt> points to a pre-allocated buffer, then
+ * <tt>dstSizes[i]</tt> should be set to the size of the buffer.  Upon return,
+ * <tt>dstSizes[i]</tt> will contain the size of the JPEG image (in bytes.)
+ *
  * @param transforms pointer to an array of n #tjtransform structures, each of
- *        which specifies the transform parameters and/or cropping region for
- *        the corresponding transformed output image.
+ * which specifies the transform parameters and/or cropping region for the
+ * corresponding transformed output image.
+ *
  * @param flags the bitwise OR of one or more of the @ref TJFLAG_BOTTOMUP
- *        "flags".
+ * "flags"
  *
  * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
  */
-DLLEXPORT int DLLCALL tjTransform(tjhandle handle, unsigned char *jpegBuf,
-  unsigned long jpegSize, int n, unsigned char **dstBufs,
-  unsigned long *dstSizes, tjtransform *transforms, int flags);
+DLLEXPORT int DLLCALL tjTransform(tjhandle handle,
+  const unsigned char *jpegBuf, unsigned long jpegSize, int n,
+  unsigned char **dstBufs, unsigned long *dstSizes, tjtransform *transforms,
+  int flags);
 
 
 /**
  * Destroy a TurboJPEG compressor, decompressor, or transformer instance.
  *
  * @param handle a handle to a TurboJPEG compressor, decompressor or
- *        transformer instance
+ * transformer instance
  *
  * @return 0 if successful, or -1 if an error occurred (see #tjGetErrorStr().)
  */
@@ -852,9 +1440,9 @@ DLLEXPORT int DLLCALL tjDestroy(tjhandle handle);
  * (re)allocation (by setting #TJFLAG_NOREALLOC.)
  *
  * @param bytes the number of bytes to allocate
- * 
+ *
  * @return a pointer to a newly-allocated buffer with the specified number of
- *         bytes
+ * bytes.
  *
  * @sa tjFree()
  */
@@ -882,6 +1470,13 @@ DLLEXPORT void DLLCALL tjFree(unsigned char *buffer);
 DLLEXPORT char* DLLCALL tjGetErrorStr(void);
 
 
+/* Deprecated functions and macros */
+#define TJFLAG_FORCEMMX        8
+#define TJFLAG_FORCESSE       16
+#define TJFLAG_FORCESSE2      32
+#define TJFLAG_FORCESSE3     128
+
+
 /* Backward compatibility functions and macros (nothing to see here) */
 #define NUMSUBOPT TJ_NUMSAMP
 #define TJ_444 TJSAMP_444
@@ -905,6 +1500,9 @@ DLLEXPORT unsigned long DLLCALL TJBUFSIZE(int width, int height);
 DLLEXPORT unsigned long DLLCALL TJBUFSIZEYUV(int width, int height,
   int jpegSubsamp);
 
+DLLEXPORT unsigned long DLLCALL tjBufSizeYUV(int width, int height,
+  int subsamp);
+
 DLLEXPORT int DLLCALL tjCompress(tjhandle handle, unsigned char *srcBuf,
   int width, int pitch, int height, int pixelSize, unsigned char *dstBuf,
   unsigned long *compressedSize, int jpegSubsamp, int jpegQual, int flags);
@@ -913,13 +1511,25 @@ DLLEXPORT int DLLCALL tjEncodeYUV(tjhandle handle,
   unsigned char *srcBuf, int width, int pitch, int height, int pixelSize,
   unsigned char *dstBuf, int subsamp, int flags);
 
+DLLEXPORT int DLLCALL tjEncodeYUV2(tjhandle handle,
+  unsigned char *srcBuf, int width, int pitch, int height, int pixelFormat,
+  unsigned char *dstBuf, int subsamp, int flags);
+
 DLLEXPORT int DLLCALL tjDecompressHeader(tjhandle handle,
   unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height);
 
+DLLEXPORT int DLLCALL tjDecompressHeader2(tjhandle handle,
+  unsigned char *jpegBuf, unsigned long jpegSize, int *width, int *height,
+  int *jpegSubsamp);
+
 DLLEXPORT int DLLCALL tjDecompress(tjhandle handle,
   unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
   int width, int pitch, int height, int pixelSize, int flags);
 
+DLLEXPORT int DLLCALL tjDecompressToYUV(tjhandle handle,
+  unsigned char *jpegBuf, unsigned long jpegSize, unsigned char *dstBuf,
+  int flags);
+
 
 /**
  * @}