| Index: public/common/unicode/ubidi.h
|
| ===================================================================
|
| --- public/common/unicode/ubidi.h (revision 210659)
|
| +++ public/common/unicode/ubidi.h (working copy)
|
| @@ -1,2096 +0,0 @@
|
| -/*
|
| -******************************************************************************
|
| -*
|
| -* Copyright (C) 1999-2010, International Business Machines
|
| -* Corporation and others. All Rights Reserved.
|
| -*
|
| -******************************************************************************
|
| -* file name: ubidi.h
|
| -* encoding: US-ASCII
|
| -* tab size: 8 (not used)
|
| -* indentation:4
|
| -*
|
| -* created on: 1999jul27
|
| -* created by: Markus W. Scherer, updated by Matitiahu Allouche
|
| -*/
|
| -
|
| -#ifndef UBIDI_H
|
| -#define UBIDI_H
|
| -
|
| -#include "unicode/utypes.h"
|
| -#include "unicode/uchar.h"
|
| -#include "unicode/localpointer.h"
|
| -
|
| -/**
|
| - *\file
|
| - * \brief C API: Bidi algorithm
|
| - *
|
| - * <h2>Bidi algorithm for ICU</h2>
|
| - *
|
| - * This is an implementation of the Unicode Bidirectional Algorithm.
|
| - * The algorithm is defined in the
|
| - * <a href="http://www.unicode.org/unicode/reports/tr9/">Unicode Standard Annex #9</a>.<p>
|
| - *
|
| - * Note: Libraries that perform a bidirectional algorithm and
|
| - * reorder strings accordingly are sometimes called "Storage Layout Engines".
|
| - * ICU's Bidi and shaping (u_shapeArabic()) APIs can be used at the core of such
|
| - * "Storage Layout Engines".
|
| - *
|
| - * <h3>General remarks about the API:</h3>
|
| - *
|
| - * In functions with an error code parameter,
|
| - * the <code>pErrorCode</code> pointer must be valid
|
| - * and the value that it points to must not indicate a failure before
|
| - * the function call. Otherwise, the function returns immediately.
|
| - * After the function call, the value indicates success or failure.<p>
|
| - *
|
| - * The "limit" of a sequence of characters is the position just after their
|
| - * last character, i.e., one more than that position.<p>
|
| - *
|
| - * Some of the API functions provide access to "runs".
|
| - * Such a "run" is defined as a sequence of characters
|
| - * that are at the same embedding level
|
| - * after performing the Bidi algorithm.<p>
|
| - *
|
| - * @author Markus W. Scherer
|
| - * @version 1.0
|
| - *
|
| - *
|
| - * <h4> Sample code for the ICU Bidi API </h4>
|
| - *
|
| - * <h5>Rendering a paragraph with the ICU Bidi API</h5>
|
| - *
|
| - * This is (hypothetical) sample code that illustrates
|
| - * how the ICU Bidi API could be used to render a paragraph of text.
|
| - * Rendering code depends highly on the graphics system,
|
| - * therefore this sample code must make a lot of assumptions,
|
| - * which may or may not match any existing graphics system's properties.
|
| - *
|
| - * <p>The basic assumptions are:</p>
|
| - * <ul>
|
| - * <li>Rendering is done from left to right on a horizontal line.</li>
|
| - * <li>A run of single-style, unidirectional text can be rendered at once.</li>
|
| - * <li>Such a run of text is passed to the graphics system with
|
| - * characters (code units) in logical order.</li>
|
| - * <li>The line-breaking algorithm is very complicated
|
| - * and Locale-dependent -
|
| - * and therefore its implementation omitted from this sample code.</li>
|
| - * </ul>
|
| - *
|
| - * <pre>
|
| - * \code
|
| - *#include "unicode/ubidi.h"
|
| - *
|
| - *typedef enum {
|
| - * styleNormal=0, styleSelected=1,
|
| - * styleBold=2, styleItalics=4,
|
| - * styleSuper=8, styleSub=16
|
| - *} Style;
|
| - *
|
| - *typedef struct { int32_t limit; Style style; } StyleRun;
|
| - *
|
| - *int getTextWidth(const UChar *text, int32_t start, int32_t limit,
|
| - * const StyleRun *styleRuns, int styleRunCount);
|
| - *
|
| - * // set *pLimit and *pStyleRunLimit for a line
|
| - * // from text[start] and from styleRuns[styleRunStart]
|
| - * // using ubidi_getLogicalRun(para, ...)
|
| - *void getLineBreak(const UChar *text, int32_t start, int32_t *pLimit,
|
| - * UBiDi *para,
|
| - * const StyleRun *styleRuns, int styleRunStart, int *pStyleRunLimit,
|
| - * int *pLineWidth);
|
| - *
|
| - * // render runs on a line sequentially, always from left to right
|
| - *
|
| - * // prepare rendering a new line
|
| - * void startLine(UBiDiDirection textDirection, int lineWidth);
|
| - *
|
| - * // render a run of text and advance to the right by the run width
|
| - * // the text[start..limit-1] is always in logical order
|
| - * void renderRun(const UChar *text, int32_t start, int32_t limit,
|
| - * UBiDiDirection textDirection, Style style);
|
| - *
|
| - * // We could compute a cross-product
|
| - * // from the style runs with the directional runs
|
| - * // and then reorder it.
|
| - * // Instead, here we iterate over each run type
|
| - * // and render the intersections -
|
| - * // with shortcuts in simple (and common) cases.
|
| - * // renderParagraph() is the main function.
|
| - *
|
| - * // render a directional run with
|
| - * // (possibly) multiple style runs intersecting with it
|
| - * void renderDirectionalRun(const UChar *text,
|
| - * int32_t start, int32_t limit,
|
| - * UBiDiDirection direction,
|
| - * const StyleRun *styleRuns, int styleRunCount) {
|
| - * int i;
|
| - *
|
| - * // iterate over style runs
|
| - * if(direction==UBIDI_LTR) {
|
| - * int styleLimit;
|
| - *
|
| - * for(i=0; i<styleRunCount; ++i) {
|
| - * styleLimit=styleRun[i].limit;
|
| - * if(start<styleLimit) {
|
| - * if(styleLimit>limit) { styleLimit=limit; }
|
| - * renderRun(text, start, styleLimit,
|
| - * direction, styleRun[i].style);
|
| - * if(styleLimit==limit) { break; }
|
| - * start=styleLimit;
|
| - * }
|
| - * }
|
| - * } else {
|
| - * int styleStart;
|
| - *
|
| - * for(i=styleRunCount-1; i>=0; --i) {
|
| - * if(i>0) {
|
| - * styleStart=styleRun[i-1].limit;
|
| - * } else {
|
| - * styleStart=0;
|
| - * }
|
| - * if(limit>=styleStart) {
|
| - * if(styleStart<start) { styleStart=start; }
|
| - * renderRun(text, styleStart, limit,
|
| - * direction, styleRun[i].style);
|
| - * if(styleStart==start) { break; }
|
| - * limit=styleStart;
|
| - * }
|
| - * }
|
| - * }
|
| - * }
|
| - *
|
| - * // the line object represents text[start..limit-1]
|
| - * void renderLine(UBiDi *line, const UChar *text,
|
| - * int32_t start, int32_t limit,
|
| - * const StyleRun *styleRuns, int styleRunCount) {
|
| - * UBiDiDirection direction=ubidi_getDirection(line);
|
| - * if(direction!=UBIDI_MIXED) {
|
| - * // unidirectional
|
| - * if(styleRunCount<=1) {
|
| - * renderRun(text, start, limit, direction, styleRuns[0].style);
|
| - * } else {
|
| - * renderDirectionalRun(text, start, limit,
|
| - * direction, styleRuns, styleRunCount);
|
| - * }
|
| - * } else {
|
| - * // mixed-directional
|
| - * int32_t count, i, length;
|
| - * UBiDiLevel level;
|
| - *
|
| - * count=ubidi_countRuns(para, pErrorCode);
|
| - * if(U_SUCCESS(*pErrorCode)) {
|
| - * if(styleRunCount<=1) {
|
| - * Style style=styleRuns[0].style;
|
| - *
|
| - * // iterate over directional runs
|
| - * for(i=0; i<count; ++i) {
|
| - * direction=ubidi_getVisualRun(para, i, &start, &length);
|
| - * renderRun(text, start, start+length, direction, style);
|
| - * }
|
| - * } else {
|
| - * int32_t j;
|
| - *
|
| - * // iterate over both directional and style runs
|
| - * for(i=0; i<count; ++i) {
|
| - * direction=ubidi_getVisualRun(line, i, &start, &length);
|
| - * renderDirectionalRun(text, start, start+length,
|
| - * direction, styleRuns, styleRunCount);
|
| - * }
|
| - * }
|
| - * }
|
| - * }
|
| - * }
|
| - *
|
| - *void renderParagraph(const UChar *text, int32_t length,
|
| - * UBiDiDirection textDirection,
|
| - * const StyleRun *styleRuns, int styleRunCount,
|
| - * int lineWidth,
|
| - * UErrorCode *pErrorCode) {
|
| - * UBiDi *para;
|
| - *
|
| - * if(pErrorCode==NULL || U_FAILURE(*pErrorCode) || length<=0) {
|
| - * return;
|
| - * }
|
| - *
|
| - * para=ubidi_openSized(length, 0, pErrorCode);
|
| - * if(para==NULL) { return; }
|
| - *
|
| - * ubidi_setPara(para, text, length,
|
| - * textDirection ? UBIDI_DEFAULT_RTL : UBIDI_DEFAULT_LTR,
|
| - * NULL, pErrorCode);
|
| - * if(U_SUCCESS(*pErrorCode)) {
|
| - * UBiDiLevel paraLevel=1&ubidi_getParaLevel(para);
|
| - * StyleRun styleRun={ length, styleNormal };
|
| - * int width;
|
| - *
|
| - * if(styleRuns==NULL || styleRunCount<=0) {
|
| - * styleRunCount=1;
|
| - * styleRuns=&styleRun;
|
| - * }
|
| - *
|
| - * // assume styleRuns[styleRunCount-1].limit>=length
|
| - *
|
| - * width=getTextWidth(text, 0, length, styleRuns, styleRunCount);
|
| - * if(width<=lineWidth) {
|
| - * // everything fits onto one line
|
| - *
|
| - * // prepare rendering a new line from either left or right
|
| - * startLine(paraLevel, width);
|
| - *
|
| - * renderLine(para, text, 0, length,
|
| - * styleRuns, styleRunCount);
|
| - * } else {
|
| - * UBiDi *line;
|
| - *
|
| - * // we need to render several lines
|
| - * line=ubidi_openSized(length, 0, pErrorCode);
|
| - * if(line!=NULL) {
|
| - * int32_t start=0, limit;
|
| - * int styleRunStart=0, styleRunLimit;
|
| - *
|
| - * for(;;) {
|
| - * limit=length;
|
| - * styleRunLimit=styleRunCount;
|
| - * getLineBreak(text, start, &limit, para,
|
| - * styleRuns, styleRunStart, &styleRunLimit,
|
| - * &width);
|
| - * ubidi_setLine(para, start, limit, line, pErrorCode);
|
| - * if(U_SUCCESS(*pErrorCode)) {
|
| - * // prepare rendering a new line
|
| - * // from either left or right
|
| - * startLine(paraLevel, width);
|
| - *
|
| - * renderLine(line, text, start, limit,
|
| - * styleRuns+styleRunStart,
|
| - * styleRunLimit-styleRunStart);
|
| - * }
|
| - * if(limit==length) { break; }
|
| - * start=limit;
|
| - * styleRunStart=styleRunLimit-1;
|
| - * if(start>=styleRuns[styleRunStart].limit) {
|
| - * ++styleRunStart;
|
| - * }
|
| - * }
|
| - *
|
| - * ubidi_close(line);
|
| - * }
|
| - * }
|
| - * }
|
| - *
|
| - * ubidi_close(para);
|
| - *}
|
| - *\endcode
|
| - * </pre>
|
| - */
|
| -
|
| -/*DOCXX_TAG*/
|
| -/*@{*/
|
| -
|
| -/**
|
| - * UBiDiLevel is the type of the level values in this
|
| - * Bidi implementation.
|
| - * It holds an embedding level and indicates the visual direction
|
| - * by its bit 0 (even/odd value).<p>
|
| - *
|
| - * It can also hold non-level values for the
|
| - * <code>paraLevel</code> and <code>embeddingLevels</code>
|
| - * arguments of <code>ubidi_setPara()</code>; there:
|
| - * <ul>
|
| - * <li>bit 7 of an <code>embeddingLevels[]</code>
|
| - * value indicates whether the using application is
|
| - * specifying the level of a character to <i>override</i> whatever the
|
| - * Bidi implementation would resolve it to.</li>
|
| - * <li><code>paraLevel</code> can be set to the
|
| - * pseudo-level values <code>UBIDI_DEFAULT_LTR</code>
|
| - * and <code>UBIDI_DEFAULT_RTL</code>.</li>
|
| - * </ul>
|
| - *
|
| - * @see ubidi_setPara
|
| - *
|
| - * <p>The related constants are not real, valid level values.
|
| - * <code>UBIDI_DEFAULT_XXX</code> can be used to specify
|
| - * a default for the paragraph level for
|
| - * when the <code>ubidi_setPara()</code> function
|
| - * shall determine it but there is no
|
| - * strongly typed character in the input.<p>
|
| - *
|
| - * Note that the value for <code>UBIDI_DEFAULT_LTR</code> is even
|
| - * and the one for <code>UBIDI_DEFAULT_RTL</code> is odd,
|
| - * just like with normal LTR and RTL level values -
|
| - * these special values are designed that way. Also, the implementation
|
| - * assumes that UBIDI_MAX_EXPLICIT_LEVEL is odd.
|
| - *
|
| - * @see UBIDI_DEFAULT_LTR
|
| - * @see UBIDI_DEFAULT_RTL
|
| - * @see UBIDI_LEVEL_OVERRIDE
|
| - * @see UBIDI_MAX_EXPLICIT_LEVEL
|
| - * @stable ICU 2.0
|
| - */
|
| -typedef uint8_t UBiDiLevel;
|
| -
|
| -/** Paragraph level setting.<p>
|
| - *
|
| - * Constant indicating that the base direction depends on the first strong
|
| - * directional character in the text according to the Unicode Bidirectional
|
| - * Algorithm. If no strong directional character is present,
|
| - * then set the paragraph level to 0 (left-to-right).<p>
|
| - *
|
| - * If this value is used in conjunction with reordering modes
|
| - * <code>UBIDI_REORDER_INVERSE_LIKE_DIRECT</code> or
|
| - * <code>UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code>, the text to reorder
|
| - * is assumed to be visual LTR, and the text after reordering is required
|
| - * to be the corresponding logical string with appropriate contextual
|
| - * direction. The direction of the result string will be RTL if either
|
| - * the righmost or leftmost strong character of the source text is RTL
|
| - * or Arabic Letter, the direction will be LTR otherwise.<p>
|
| - *
|
| - * If reordering option <code>UBIDI_OPTION_INSERT_MARKS</code> is set, an RLM may
|
| - * be added at the beginning of the result string to ensure round trip
|
| - * (that the result string, when reordered back to visual, will produce
|
| - * the original source text).
|
| - * @see UBIDI_REORDER_INVERSE_LIKE_DIRECT
|
| - * @see UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_DEFAULT_LTR 0xfe
|
| -
|
| -/** Paragraph level setting.<p>
|
| - *
|
| - * Constant indicating that the base direction depends on the first strong
|
| - * directional character in the text according to the Unicode Bidirectional
|
| - * Algorithm. If no strong directional character is present,
|
| - * then set the paragraph level to 1 (right-to-left).<p>
|
| - *
|
| - * If this value is used in conjunction with reordering modes
|
| - * <code>UBIDI_REORDER_INVERSE_LIKE_DIRECT</code> or
|
| - * <code>UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code>, the text to reorder
|
| - * is assumed to be visual LTR, and the text after reordering is required
|
| - * to be the corresponding logical string with appropriate contextual
|
| - * direction. The direction of the result string will be RTL if either
|
| - * the righmost or leftmost strong character of the source text is RTL
|
| - * or Arabic Letter, or if the text contains no strong character;
|
| - * the direction will be LTR otherwise.<p>
|
| - *
|
| - * If reordering option <code>UBIDI_OPTION_INSERT_MARKS</code> is set, an RLM may
|
| - * be added at the beginning of the result string to ensure round trip
|
| - * (that the result string, when reordered back to visual, will produce
|
| - * the original source text).
|
| - * @see UBIDI_REORDER_INVERSE_LIKE_DIRECT
|
| - * @see UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_DEFAULT_RTL 0xff
|
| -
|
| -/**
|
| - * Maximum explicit embedding level.
|
| - * (The maximum resolved level can be up to <code>UBIDI_MAX_EXPLICIT_LEVEL+1</code>).
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_MAX_EXPLICIT_LEVEL 61
|
| -
|
| -/** Bit flag for level input.
|
| - * Overrides directional properties.
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_LEVEL_OVERRIDE 0x80
|
| -
|
| -/**
|
| - * Special value which can be returned by the mapping functions when a logical
|
| - * index has no corresponding visual index or vice-versa. This may happen
|
| - * for the logical-to-visual mapping of a Bidi control when option
|
| - * <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> is specified. This can also happen
|
| - * for the visual-to-logical mapping of a Bidi mark (LRM or RLM) inserted
|
| - * by option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
|
| - * @see ubidi_getVisualIndex
|
| - * @see ubidi_getVisualMap
|
| - * @see ubidi_getLogicalIndex
|
| - * @see ubidi_getLogicalMap
|
| - * @stable ICU 3.6
|
| - */
|
| -#define UBIDI_MAP_NOWHERE (-1)
|
| -
|
| -/**
|
| - * <code>UBiDiDirection</code> values indicate the text direction.
|
| - * @stable ICU 2.0
|
| - */
|
| -enum UBiDiDirection {
|
| - /** Left-to-right text. This is a 0 value.
|
| - * <ul>
|
| - * <li>As return value for <code>ubidi_getDirection()</code>, it means
|
| - * that the source string contains no right-to-left characters, or
|
| - * that the source string is empty and the paragraph level is even.
|
| - * <li> As return value for <code>ubidi_getBaseDirection()</code>, it
|
| - * means that the first strong character of the source string has
|
| - * a left-to-right direction.
|
| - * </ul>
|
| - * @stable ICU 2.0
|
| - */
|
| - UBIDI_LTR,
|
| - /** Right-to-left text. This is a 1 value.
|
| - * <ul>
|
| - * <li>As return value for <code>ubidi_getDirection()</code>, it means
|
| - * that the source string contains no left-to-right characters, or
|
| - * that the source string is empty and the paragraph level is odd.
|
| - * <li> As return value for <code>ubidi_getBaseDirection()</code>, it
|
| - * means that the first strong character of the source string has
|
| - * a right-to-left direction.
|
| - * </ul>
|
| - * @stable ICU 2.0
|
| - */
|
| - UBIDI_RTL,
|
| - /** Mixed-directional text.
|
| - * <p>As return value for <code>ubidi_getDirection()</code>, it means
|
| - * that the source string contains both left-to-right and
|
| - * right-to-left characters.
|
| - * @stable ICU 2.0
|
| - */
|
| - UBIDI_MIXED,
|
| - /** No strongly directional text.
|
| - * <p>As return value for <code>ubidi_getBaseDirection()</code>, it means
|
| - * that the source string is missing or empty, or contains neither left-to-right
|
| - * nor right-to-left characters.
|
| - * @draft ICU 4.6
|
| - */
|
| - UBIDI_NEUTRAL
|
| -};
|
| -
|
| -/** @stable ICU 2.0 */
|
| -typedef enum UBiDiDirection UBiDiDirection;
|
| -
|
| -/**
|
| - * Forward declaration of the <code>UBiDi</code> structure for the declaration of
|
| - * the API functions. Its fields are implementation-specific.<p>
|
| - * This structure holds information about a paragraph (or multiple paragraphs)
|
| - * of text with Bidi-algorithm-related details, or about one line of
|
| - * such a paragraph.<p>
|
| - * Reordering can be done on a line, or on one or more paragraphs which are
|
| - * then interpreted each as one single line.
|
| - * @stable ICU 2.0
|
| - */
|
| -struct UBiDi;
|
| -
|
| -/** @stable ICU 2.0 */
|
| -typedef struct UBiDi UBiDi;
|
| -
|
| -/**
|
| - * Allocate a <code>UBiDi</code> structure.
|
| - * Such an object is initially empty. It is assigned
|
| - * the Bidi properties of a piece of text containing one or more paragraphs
|
| - * by <code>ubidi_setPara()</code>
|
| - * or the Bidi properties of a line within a paragraph by
|
| - * <code>ubidi_setLine()</code>.<p>
|
| - * This object can be reused for as long as it is not deallocated
|
| - * by calling <code>ubidi_close()</code>.<p>
|
| - * <code>ubidi_setPara()</code> and <code>ubidi_setLine()</code> will allocate
|
| - * additional memory for internal structures as necessary.
|
| - *
|
| - * @return An empty <code>UBiDi</code> object.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE UBiDi * U_EXPORT2
|
| -ubidi_open(void);
|
| -
|
| -/**
|
| - * Allocate a <code>UBiDi</code> structure with preallocated memory
|
| - * for internal structures.
|
| - * This function provides a <code>UBiDi</code> object like <code>ubidi_open()</code>
|
| - * with no arguments, but it also preallocates memory for internal structures
|
| - * according to the sizings supplied by the caller.<p>
|
| - * Subsequent functions will not allocate any more memory, and are thus
|
| - * guaranteed not to fail because of lack of memory.<p>
|
| - * The preallocation can be limited to some of the internal memory
|
| - * by setting some values to 0 here. That means that if, e.g.,
|
| - * <code>maxRunCount</code> cannot be reasonably predetermined and should not
|
| - * be set to <code>maxLength</code> (the only failproof value) to avoid
|
| - * wasting memory, then <code>maxRunCount</code> could be set to 0 here
|
| - * and the internal structures that are associated with it will be allocated
|
| - * on demand, just like with <code>ubidi_open()</code>.
|
| - *
|
| - * @param maxLength is the maximum text or line length that internal memory
|
| - * will be preallocated for. An attempt to associate this object with a
|
| - * longer text will fail, unless this value is 0, which leaves the allocation
|
| - * up to the implementation.
|
| - *
|
| - * @param maxRunCount is the maximum anticipated number of same-level runs
|
| - * that internal memory will be preallocated for. An attempt to access
|
| - * visual runs on an object that was not preallocated for as many runs
|
| - * as the text was actually resolved to will fail,
|
| - * unless this value is 0, which leaves the allocation up to the implementation.<br><br>
|
| - * The number of runs depends on the actual text and maybe anywhere between
|
| - * 1 and <code>maxLength</code>. It is typically small.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return An empty <code>UBiDi</code> object with preallocated memory.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE UBiDi * U_EXPORT2
|
| -ubidi_openSized(int32_t maxLength, int32_t maxRunCount, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * <code>ubidi_close()</code> must be called to free the memory
|
| - * associated with a UBiDi object.<p>
|
| - *
|
| - * <strong>Important: </strong>
|
| - * A parent <code>UBiDi</code> object must not be destroyed or reused if
|
| - * it still has children.
|
| - * If a <code>UBiDi</code> object has become the <i>child</i>
|
| - * of another one (its <i>parent</i>) by calling
|
| - * <code>ubidi_setLine()</code>, then the child object must
|
| - * be destroyed (closed) or reused (by calling
|
| - * <code>ubidi_setPara()</code> or <code>ubidi_setLine()</code>)
|
| - * before the parent object.
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - *
|
| - * @see ubidi_setPara
|
| - * @see ubidi_setLine
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_close(UBiDi *pBiDi);
|
| -
|
| -#if U_SHOW_CPLUSPLUS_API
|
| -
|
| -U_NAMESPACE_BEGIN
|
| -
|
| -/**
|
| - * \class LocalUBiDiPointer
|
| - * "Smart pointer" class, closes a UBiDi via ubidi_close().
|
| - * For most methods see the LocalPointerBase base class.
|
| - *
|
| - * @see LocalPointerBase
|
| - * @see LocalPointer
|
| - * @stable ICU 4.4
|
| - */
|
| -U_DEFINE_LOCAL_OPEN_POINTER(LocalUBiDiPointer, UBiDi, ubidi_close);
|
| -
|
| -U_NAMESPACE_END
|
| -
|
| -#endif
|
| -
|
| -/**
|
| - * Modify the operation of the Bidi algorithm such that it
|
| - * approximates an "inverse Bidi" algorithm. This function
|
| - * must be called before <code>ubidi_setPara()</code>.
|
| - *
|
| - * <p>The normal operation of the Bidi algorithm as described
|
| - * in the Unicode Technical Report is to take text stored in logical
|
| - * (keyboard, typing) order and to determine the reordering of it for visual
|
| - * rendering.
|
| - * Some legacy systems store text in visual order, and for operations
|
| - * with standard, Unicode-based algorithms, the text needs to be transformed
|
| - * to logical order. This is effectively the inverse algorithm of the
|
| - * described Bidi algorithm. Note that there is no standard algorithm for
|
| - * this "inverse Bidi" and that the current implementation provides only an
|
| - * approximation of "inverse Bidi".</p>
|
| - *
|
| - * <p>With <code>isInverse</code> set to <code>TRUE</code>,
|
| - * this function changes the behavior of some of the subsequent functions
|
| - * in a way that they can be used for the inverse Bidi algorithm.
|
| - * Specifically, runs of text with numeric characters will be treated in a
|
| - * special way and may need to be surrounded with LRM characters when they are
|
| - * written in reordered sequence.</p>
|
| - *
|
| - * <p>Output runs should be retrieved using <code>ubidi_getVisualRun()</code>.
|
| - * Since the actual input for "inverse Bidi" is visually ordered text and
|
| - * <code>ubidi_getVisualRun()</code> gets the reordered runs, these are actually
|
| - * the runs of the logically ordered output.</p>
|
| - *
|
| - * <p>Calling this function with argument <code>isInverse</code> set to
|
| - * <code>TRUE</code> is equivalent to calling
|
| - * <code>ubidi_setReorderingMode</code> with argument
|
| - * <code>reorderingMode</code>
|
| - * set to <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>.<br>
|
| - * Calling this function with argument <code>isInverse</code> set to
|
| - * <code>FALSE</code> is equivalent to calling
|
| - * <code>ubidi_setReorderingMode</code> with argument
|
| - * <code>reorderingMode</code>
|
| - * set to <code>#UBIDI_REORDER_DEFAULT</code>.
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - *
|
| - * @param isInverse specifies "forward" or "inverse" Bidi operation.
|
| - *
|
| - * @see ubidi_setPara
|
| - * @see ubidi_writeReordered
|
| - * @see ubidi_setReorderingMode
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_setInverse(UBiDi *pBiDi, UBool isInverse);
|
| -
|
| -/**
|
| - * Is this Bidi object set to perform the inverse Bidi algorithm?
|
| - * <p>Note: calling this function after setting the reordering mode with
|
| - * <code>ubidi_setReorderingMode</code> will return <code>TRUE</code> if the
|
| - * reordering mode was set to <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>,
|
| - * <code>FALSE</code> for all other values.</p>
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - * @return TRUE if the Bidi object is set to perform the inverse Bidi algorithm
|
| - * by handling numbers as L.
|
| - *
|
| - * @see ubidi_setInverse
|
| - * @see ubidi_setReorderingMode
|
| - * @stable ICU 2.0
|
| - */
|
| -
|
| -U_STABLE UBool U_EXPORT2
|
| -ubidi_isInverse(UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Specify whether block separators must be allocated level zero,
|
| - * so that successive paragraphs will progress from left to right.
|
| - * This function must be called before <code>ubidi_setPara()</code>.
|
| - * Paragraph separators (B) may appear in the text. Setting them to level zero
|
| - * means that all paragraph separators (including one possibly appearing
|
| - * in the last text position) are kept in the reordered text after the text
|
| - * that they follow in the source text.
|
| - * When this feature is not enabled, a paragraph separator at the last
|
| - * position of the text before reordering will go to the first position
|
| - * of the reordered text when the paragraph level is odd.
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - *
|
| - * @param orderParagraphsLTR specifies whether paragraph separators (B) must
|
| - * receive level 0, so that successive paragraphs progress from left to right.
|
| - *
|
| - * @see ubidi_setPara
|
| - * @stable ICU 3.4
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_orderParagraphsLTR(UBiDi *pBiDi, UBool orderParagraphsLTR);
|
| -
|
| -/**
|
| - * Is this Bidi object set to allocate level 0 to block separators so that
|
| - * successive paragraphs progress from left to right?
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - * @return TRUE if the Bidi object is set to allocate level 0 to block
|
| - * separators.
|
| - *
|
| - * @see ubidi_orderParagraphsLTR
|
| - * @stable ICU 3.4
|
| - */
|
| -U_STABLE UBool U_EXPORT2
|
| -ubidi_isOrderParagraphsLTR(UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * <code>UBiDiReorderingMode</code> values indicate which variant of the Bidi
|
| - * algorithm to use.
|
| - *
|
| - * @see ubidi_setReorderingMode
|
| - * @stable ICU 3.6
|
| - */
|
| -typedef enum UBiDiReorderingMode {
|
| - /** Regular Logical to Visual Bidi algorithm according to Unicode.
|
| - * This is a 0 value.
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_DEFAULT = 0,
|
| - /** Logical to Visual algorithm which handles numbers in a way which
|
| - * mimicks the behavior of Windows XP.
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_NUMBERS_SPECIAL,
|
| - /** Logical to Visual algorithm grouping numbers with adjacent R characters
|
| - * (reversible algorithm).
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_GROUP_NUMBERS_WITH_R,
|
| - /** Reorder runs only to transform a Logical LTR string to the Logical RTL
|
| - * string with the same display, or vice-versa.<br>
|
| - * If this mode is set together with option
|
| - * <code>#UBIDI_OPTION_INSERT_MARKS</code>, some Bidi controls in the source
|
| - * text may be removed and other controls may be added to produce the
|
| - * minimum combination which has the required display.
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_RUNS_ONLY,
|
| - /** Visual to Logical algorithm which handles numbers like L
|
| - * (same algorithm as selected by <code>ubidi_setInverse(TRUE)</code>.
|
| - * @see ubidi_setInverse
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_INVERSE_NUMBERS_AS_L,
|
| - /** Visual to Logical algorithm equivalent to the regular Logical to Visual
|
| - * algorithm.
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_INVERSE_LIKE_DIRECT,
|
| - /** Inverse Bidi (Visual to Logical) algorithm for the
|
| - * <code>UBIDI_REORDER_NUMBERS_SPECIAL</code> Bidi algorithm.
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL,
|
| - /** Number of values for reordering mode.
|
| - * @stable ICU 3.6 */
|
| - UBIDI_REORDER_COUNT
|
| -} UBiDiReorderingMode;
|
| -
|
| -/**
|
| - * Modify the operation of the Bidi algorithm such that it implements some
|
| - * variant to the basic Bidi algorithm or approximates an "inverse Bidi"
|
| - * algorithm, depending on different values of the "reordering mode".
|
| - * This function must be called before <code>ubidi_setPara()</code>, and stays
|
| - * in effect until called again with a different argument.
|
| - *
|
| - * <p>The normal operation of the Bidi algorithm as described
|
| - * in the Unicode Standard Annex #9 is to take text stored in logical
|
| - * (keyboard, typing) order and to determine how to reorder it for visual
|
| - * rendering.</p>
|
| - *
|
| - * <p>With the reordering mode set to a value other than
|
| - * <code>#UBIDI_REORDER_DEFAULT</code>, this function changes the behavior of
|
| - * some of the subsequent functions in a way such that they implement an
|
| - * inverse Bidi algorithm or some other algorithm variants.</p>
|
| - *
|
| - * <p>Some legacy systems store text in visual order, and for operations
|
| - * with standard, Unicode-based algorithms, the text needs to be transformed
|
| - * into logical order. This is effectively the inverse algorithm of the
|
| - * described Bidi algorithm. Note that there is no standard algorithm for
|
| - * this "inverse Bidi", so a number of variants are implemented here.</p>
|
| - *
|
| - * <p>In other cases, it may be desirable to emulate some variant of the
|
| - * Logical to Visual algorithm (e.g. one used in MS Windows), or perform a
|
| - * Logical to Logical transformation.</p>
|
| - *
|
| - * <ul>
|
| - * <li>When the reordering mode is set to <code>#UBIDI_REORDER_DEFAULT</code>,
|
| - * the standard Bidi Logical to Visual algorithm is applied.</li>
|
| - *
|
| - * <li>When the reordering mode is set to
|
| - * <code>#UBIDI_REORDER_NUMBERS_SPECIAL</code>,
|
| - * the algorithm used to perform Bidi transformations when calling
|
| - * <code>ubidi_setPara</code> should approximate the algorithm used in
|
| - * Microsoft Windows XP rather than strictly conform to the Unicode Bidi
|
| - * algorithm.
|
| - * <br>
|
| - * The differences between the basic algorithm and the algorithm addressed
|
| - * by this option are as follows:
|
| - * <ul>
|
| - * <li>Within text at an even embedding level, the sequence "123AB"
|
| - * (where AB represent R or AL letters) is transformed to "123BA" by the
|
| - * Unicode algorithm and to "BA123" by the Windows algorithm.</li>
|
| - * <li>Arabic-Indic numbers (AN) are handled by the Windows algorithm just
|
| - * like regular numbers (EN).</li>
|
| - * </ul></li>
|
| - *
|
| - * <li>When the reordering mode is set to
|
| - * <code>#UBIDI_REORDER_GROUP_NUMBERS_WITH_R</code>,
|
| - * numbers located between LTR text and RTL text are associated with the RTL
|
| - * text. For instance, an LTR paragraph with content "abc 123 DEF" (where
|
| - * upper case letters represent RTL characters) will be transformed to
|
| - * "abc FED 123" (and not "abc 123 FED"), "DEF 123 abc" will be transformed
|
| - * to "123 FED abc" and "123 FED abc" will be transformed to "DEF 123 abc".
|
| - * This makes the algorithm reversible and makes it useful when round trip
|
| - * (from visual to logical and back to visual) must be achieved without
|
| - * adding LRM characters. However, this is a variation from the standard
|
| - * Unicode Bidi algorithm.<br>
|
| - * The source text should not contain Bidi control characters other than LRM
|
| - * or RLM.</li>
|
| - *
|
| - * <li>When the reordering mode is set to
|
| - * <code>#UBIDI_REORDER_RUNS_ONLY</code>,
|
| - * a "Logical to Logical" transformation must be performed:
|
| - * <ul>
|
| - * <li>If the default text level of the source text (argument <code>paraLevel</code>
|
| - * in <code>ubidi_setPara</code>) is even, the source text will be handled as
|
| - * LTR logical text and will be transformed to the RTL logical text which has
|
| - * the same LTR visual display.</li>
|
| - * <li>If the default level of the source text is odd, the source text
|
| - * will be handled as RTL logical text and will be transformed to the
|
| - * LTR logical text which has the same LTR visual display.</li>
|
| - * </ul>
|
| - * This mode may be needed when logical text which is basically Arabic or
|
| - * Hebrew, with possible included numbers or phrases in English, has to be
|
| - * displayed as if it had an even embedding level (this can happen if the
|
| - * displaying application treats all text as if it was basically LTR).
|
| - * <br>
|
| - * This mode may also be needed in the reverse case, when logical text which is
|
| - * basically English, with possible included phrases in Arabic or Hebrew, has to
|
| - * be displayed as if it had an odd embedding level.
|
| - * <br>
|
| - * Both cases could be handled by adding LRE or RLE at the head of the text,
|
| - * if the display subsystem supports these formatting controls. If it does not,
|
| - * the problem may be handled by transforming the source text in this mode
|
| - * before displaying it, so that it will be displayed properly.<br>
|
| - * The source text should not contain Bidi control characters other than LRM
|
| - * or RLM.</li>
|
| - *
|
| - * <li>When the reordering mode is set to
|
| - * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>, an "inverse Bidi" algorithm
|
| - * is applied.
|
| - * Runs of text with numeric characters will be treated like LTR letters and
|
| - * may need to be surrounded with LRM characters when they are written in
|
| - * reordered sequence (the option <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> can
|
| - * be used with function <code>ubidi_writeReordered</code> to this end. This
|
| - * mode is equivalent to calling <code>ubidi_setInverse()</code> with
|
| - * argument <code>isInverse</code> set to <code>TRUE</code>.</li>
|
| - *
|
| - * <li>When the reordering mode is set to
|
| - * <code>#UBIDI_REORDER_INVERSE_LIKE_DIRECT</code>, the "direct" Logical to Visual
|
| - * Bidi algorithm is used as an approximation of an "inverse Bidi" algorithm.
|
| - * This mode is similar to mode <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>
|
| - * but is closer to the regular Bidi algorithm.
|
| - * <br>
|
| - * For example, an LTR paragraph with the content "FED 123 456 CBA" (where
|
| - * upper case represents RTL characters) will be transformed to
|
| - * "ABC 456 123 DEF", as opposed to "DEF 123 456 ABC"
|
| - * with mode <code>UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>.<br>
|
| - * When used in conjunction with option
|
| - * <code>#UBIDI_OPTION_INSERT_MARKS</code>, this mode generally
|
| - * adds Bidi marks to the output significantly more sparingly than mode
|
| - * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code> with option
|
| - * <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> in calls to
|
| - * <code>ubidi_writeReordered</code>.</li>
|
| - *
|
| - * <li>When the reordering mode is set to
|
| - * <code>#UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code>, the Logical to Visual
|
| - * Bidi algorithm used in Windows XP is used as an approximation of an "inverse Bidi" algorithm.
|
| - * <br>
|
| - * For example, an LTR paragraph with the content "abc FED123" (where
|
| - * upper case represents RTL characters) will be transformed to "abc 123DEF."</li>
|
| - * </ul>
|
| - *
|
| - * <p>In all the reordering modes specifying an "inverse Bidi" algorithm
|
| - * (i.e. those with a name starting with <code>UBIDI_REORDER_INVERSE</code>),
|
| - * output runs should be retrieved using
|
| - * <code>ubidi_getVisualRun()</code>, and the output text with
|
| - * <code>ubidi_writeReordered()</code>. The caller should keep in mind that in
|
| - * "inverse Bidi" modes the input is actually visually ordered text and
|
| - * reordered output returned by <code>ubidi_getVisualRun()</code> or
|
| - * <code>ubidi_writeReordered()</code> are actually runs or character string
|
| - * of logically ordered output.<br>
|
| - * For all the "inverse Bidi" modes, the source text should not contain
|
| - * Bidi control characters other than LRM or RLM.</p>
|
| - *
|
| - * <p>Note that option <code>#UBIDI_OUTPUT_REVERSE</code> of
|
| - * <code>ubidi_writeReordered</code> has no useful meaning and should not be
|
| - * used in conjunction with any value of the reordering mode specifying
|
| - * "inverse Bidi" or with value <code>UBIDI_REORDER_RUNS_ONLY</code>.
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - * @param reorderingMode specifies the required variant of the Bidi algorithm.
|
| - *
|
| - * @see UBiDiReorderingMode
|
| - * @see ubidi_setInverse
|
| - * @see ubidi_setPara
|
| - * @see ubidi_writeReordered
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_setReorderingMode(UBiDi *pBiDi, UBiDiReorderingMode reorderingMode);
|
| -
|
| -/**
|
| - * What is the requested reordering mode for a given Bidi object?
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - * @return the current reordering mode of the Bidi object
|
| - * @see ubidi_setReorderingMode
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE UBiDiReorderingMode U_EXPORT2
|
| -ubidi_getReorderingMode(UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * <code>UBiDiReorderingOption</code> values indicate which options are
|
| - * specified to affect the Bidi algorithm.
|
| - *
|
| - * @see ubidi_setReorderingOptions
|
| - * @stable ICU 3.6
|
| - */
|
| -typedef enum UBiDiReorderingOption {
|
| - /**
|
| - * option value for <code>ubidi_setReorderingOptions</code>:
|
| - * disable all the options which can be set with this function
|
| - * @see ubidi_setReorderingOptions
|
| - * @stable ICU 3.6
|
| - */
|
| - UBIDI_OPTION_DEFAULT = 0,
|
| -
|
| - /**
|
| - * option bit for <code>ubidi_setReorderingOptions</code>:
|
| - * insert Bidi marks (LRM or RLM) when needed to ensure correct result of
|
| - * a reordering to a Logical order
|
| - *
|
| - * <p>This option must be set or reset before calling
|
| - * <code>ubidi_setPara</code>.</p>
|
| - *
|
| - * <p>This option is significant only with reordering modes which generate
|
| - * a result with Logical order, specifically:</p>
|
| - * <ul>
|
| - * <li><code>#UBIDI_REORDER_RUNS_ONLY</code></li>
|
| - * <li><code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code></li>
|
| - * <li><code>#UBIDI_REORDER_INVERSE_LIKE_DIRECT</code></li>
|
| - * <li><code>#UBIDI_REORDER_INVERSE_FOR_NUMBERS_SPECIAL</code></li>
|
| - * </ul>
|
| - *
|
| - * <p>If this option is set in conjunction with reordering mode
|
| - * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code> or with calling
|
| - * <code>ubidi_setInverse(TRUE)</code>, it implies
|
| - * option <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code>
|
| - * in calls to function <code>ubidi_writeReordered()</code>.</p>
|
| - *
|
| - * <p>For other reordering modes, a minimum number of LRM or RLM characters
|
| - * will be added to the source text after reordering it so as to ensure
|
| - * round trip, i.e. when applying the inverse reordering mode on the
|
| - * resulting logical text with removal of Bidi marks
|
| - * (option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> set before calling
|
| - * <code>ubidi_setPara()</code> or option <code>#UBIDI_REMOVE_BIDI_CONTROLS</code>
|
| - * in <code>ubidi_writeReordered</code>), the result will be identical to the
|
| - * source text in the first transformation.
|
| - *
|
| - * <p>This option will be ignored if specified together with option
|
| - * <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>. It inhibits option
|
| - * <code>UBIDI_REMOVE_BIDI_CONTROLS</code> in calls to function
|
| - * <code>ubidi_writeReordered()</code> and it implies option
|
| - * <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> in calls to function
|
| - * <code>ubidi_writeReordered()</code> if the reordering mode is
|
| - * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code>.</p>
|
| - *
|
| - * @see ubidi_setReorderingMode
|
| - * @see ubidi_setReorderingOptions
|
| - * @stable ICU 3.6
|
| - */
|
| - UBIDI_OPTION_INSERT_MARKS = 1,
|
| -
|
| - /**
|
| - * option bit for <code>ubidi_setReorderingOptions</code>:
|
| - * remove Bidi control characters
|
| - *
|
| - * <p>This option must be set or reset before calling
|
| - * <code>ubidi_setPara</code>.</p>
|
| - *
|
| - * <p>This option nullifies option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
|
| - * It inhibits option <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code> in calls
|
| - * to function <code>ubidi_writeReordered()</code> and it implies option
|
| - * <code>#UBIDI_REMOVE_BIDI_CONTROLS</code> in calls to that function.</p>
|
| - *
|
| - * @see ubidi_setReorderingMode
|
| - * @see ubidi_setReorderingOptions
|
| - * @stable ICU 3.6
|
| - */
|
| - UBIDI_OPTION_REMOVE_CONTROLS = 2,
|
| -
|
| - /**
|
| - * option bit for <code>ubidi_setReorderingOptions</code>:
|
| - * process the output as part of a stream to be continued
|
| - *
|
| - * <p>This option must be set or reset before calling
|
| - * <code>ubidi_setPara</code>.</p>
|
| - *
|
| - * <p>This option specifies that the caller is interested in processing large
|
| - * text object in parts.
|
| - * The results of the successive calls are expected to be concatenated by the
|
| - * caller. Only the call for the last part will have this option bit off.</p>
|
| - *
|
| - * <p>When this option bit is on, <code>ubidi_setPara()</code> may process
|
| - * less than the full source text in order to truncate the text at a meaningful
|
| - * boundary. The caller should call <code>ubidi_getProcessedLength()</code>
|
| - * immediately after calling <code>ubidi_setPara()</code> in order to
|
| - * determine how much of the source text has been processed.
|
| - * Source text beyond that length should be resubmitted in following calls to
|
| - * <code>ubidi_setPara</code>. The processed length may be less than
|
| - * the length of the source text if a character preceding the last character of
|
| - * the source text constitutes a reasonable boundary (like a block separator)
|
| - * for text to be continued.<br>
|
| - * If the last character of the source text constitutes a reasonable
|
| - * boundary, the whole text will be processed at once.<br>
|
| - * If nowhere in the source text there exists
|
| - * such a reasonable boundary, the processed length will be zero.<br>
|
| - * The caller should check for such an occurrence and do one of the following:
|
| - * <ul><li>submit a larger amount of text with a better chance to include
|
| - * a reasonable boundary.</li>
|
| - * <li>resubmit the same text after turning off option
|
| - * <code>UBIDI_OPTION_STREAMING</code>.</li></ul>
|
| - * In all cases, this option should be turned off before processing the last
|
| - * part of the text.</p>
|
| - *
|
| - * <p>When the <code>UBIDI_OPTION_STREAMING</code> option is used,
|
| - * it is recommended to call <code>ubidi_orderParagraphsLTR()</code> with
|
| - * argument <code>orderParagraphsLTR</code> set to <code>TRUE</code> before
|
| - * calling <code>ubidi_setPara</code> so that later paragraphs may be
|
| - * concatenated to previous paragraphs on the right.</p>
|
| - *
|
| - * @see ubidi_setReorderingMode
|
| - * @see ubidi_setReorderingOptions
|
| - * @see ubidi_getProcessedLength
|
| - * @see ubidi_orderParagraphsLTR
|
| - * @stable ICU 3.6
|
| - */
|
| - UBIDI_OPTION_STREAMING = 4
|
| -} UBiDiReorderingOption;
|
| -
|
| -/**
|
| - * Specify which of the reordering options
|
| - * should be applied during Bidi transformations.
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - * @param reorderingOptions is a combination of zero or more of the following
|
| - * options:
|
| - * <code>#UBIDI_OPTION_DEFAULT</code>, <code>#UBIDI_OPTION_INSERT_MARKS</code>,
|
| - * <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>, <code>#UBIDI_OPTION_STREAMING</code>.
|
| - *
|
| - * @see ubidi_getReorderingOptions
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_setReorderingOptions(UBiDi *pBiDi, uint32_t reorderingOptions);
|
| -
|
| -/**
|
| - * What are the reordering options applied to a given Bidi object?
|
| - *
|
| - * @param pBiDi is a <code>UBiDi</code> object.
|
| - * @return the current reordering options of the Bidi object
|
| - * @see ubidi_setReorderingOptions
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE uint32_t U_EXPORT2
|
| -ubidi_getReorderingOptions(UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Perform the Unicode Bidi algorithm. It is defined in the
|
| - * <a href="http://www.unicode.org/unicode/reports/tr9/">Unicode Standard Anned #9</a>,
|
| - * version 13,
|
| - * also described in The Unicode Standard, Version 4.0 .<p>
|
| - *
|
| - * This function takes a piece of plain text containing one or more paragraphs,
|
| - * with or without externally specified embedding levels from <i>styled</i>
|
| - * text and computes the left-right-directionality of each character.<p>
|
| - *
|
| - * If the entire text is all of the same directionality, then
|
| - * the function may not perform all the steps described by the algorithm,
|
| - * i.e., some levels may not be the same as if all steps were performed.
|
| - * This is not relevant for unidirectional text.<br>
|
| - * For example, in pure LTR text with numbers the numbers would get
|
| - * a resolved level of 2 higher than the surrounding text according to
|
| - * the algorithm. This implementation may set all resolved levels to
|
| - * the same value in such a case.<p>
|
| - *
|
| - * The text can be composed of multiple paragraphs. Occurrence of a block
|
| - * separator in the text terminates a paragraph, and whatever comes next starts
|
| - * a new paragraph. The exception to this rule is when a Carriage Return (CR)
|
| - * is followed by a Line Feed (LF). Both CR and LF are block separators, but
|
| - * in that case, the pair of characters is considered as terminating the
|
| - * preceding paragraph, and a new paragraph will be started by a character
|
| - * coming after the LF.
|
| - *
|
| - * @param pBiDi A <code>UBiDi</code> object allocated with <code>ubidi_open()</code>
|
| - * which will be set to contain the reordering information,
|
| - * especially the resolved levels for all the characters in <code>text</code>.
|
| - *
|
| - * @param text is a pointer to the text that the Bidi algorithm will be performed on.
|
| - * This pointer is stored in the UBiDi object and can be retrieved
|
| - * with <code>ubidi_getText()</code>.<br>
|
| - * <strong>Note:</strong> the text must be (at least) <code>length</code> long.
|
| - *
|
| - * @param length is the length of the text; if <code>length==-1</code> then
|
| - * the text must be zero-terminated.
|
| - *
|
| - * @param paraLevel specifies the default level for the text;
|
| - * it is typically 0 (LTR) or 1 (RTL).
|
| - * If the function shall determine the paragraph level from the text,
|
| - * then <code>paraLevel</code> can be set to
|
| - * either <code>#UBIDI_DEFAULT_LTR</code>
|
| - * or <code>#UBIDI_DEFAULT_RTL</code>; if the text contains multiple
|
| - * paragraphs, the paragraph level shall be determined separately for
|
| - * each paragraph; if a paragraph does not include any strongly typed
|
| - * character, then the desired default is used (0 for LTR or 1 for RTL).
|
| - * Any other value between 0 and <code>#UBIDI_MAX_EXPLICIT_LEVEL</code>
|
| - * is also valid, with odd levels indicating RTL.
|
| - *
|
| - * @param embeddingLevels (in) may be used to preset the embedding and override levels,
|
| - * ignoring characters like LRE and PDF in the text.
|
| - * A level overrides the directional property of its corresponding
|
| - * (same index) character if the level has the
|
| - * <code>#UBIDI_LEVEL_OVERRIDE</code> bit set.<br><br>
|
| - * Except for that bit, it must be
|
| - * <code>paraLevel<=embeddingLevels[]<=UBIDI_MAX_EXPLICIT_LEVEL</code>,
|
| - * with one exception: a level of zero may be specified for a paragraph
|
| - * separator even if <code>paraLevel>0</code> when multiple paragraphs
|
| - * are submitted in the same call to <code>ubidi_setPara()</code>.<br><br>
|
| - * <strong>Caution: </strong>A copy of this pointer, not of the levels,
|
| - * will be stored in the <code>UBiDi</code> object;
|
| - * the <code>embeddingLevels</code> array must not be
|
| - * deallocated before the <code>UBiDi</code> structure is destroyed or reused,
|
| - * and the <code>embeddingLevels</code>
|
| - * should not be modified to avoid unexpected results on subsequent Bidi operations.
|
| - * However, the <code>ubidi_setPara()</code> and
|
| - * <code>ubidi_setLine()</code> functions may modify some or all of the levels.<br><br>
|
| - * After the <code>UBiDi</code> object is reused or destroyed, the caller
|
| - * must take care of the deallocation of the <code>embeddingLevels</code> array.<br><br>
|
| - * <strong>Note:</strong> the <code>embeddingLevels</code> array must be
|
| - * at least <code>length</code> long.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_setPara(UBiDi *pBiDi, const UChar *text, int32_t length,
|
| - UBiDiLevel paraLevel, UBiDiLevel *embeddingLevels,
|
| - UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * <code>ubidi_setLine()</code> sets a <code>UBiDi</code> to
|
| - * contain the reordering information, especially the resolved levels,
|
| - * for all the characters in a line of text. This line of text is
|
| - * specified by referring to a <code>UBiDi</code> object representing
|
| - * this information for a piece of text containing one or more paragraphs,
|
| - * and by specifying a range of indexes in this text.<p>
|
| - * In the new line object, the indexes will range from 0 to <code>limit-start-1</code>.<p>
|
| - *
|
| - * This is used after calling <code>ubidi_setPara()</code>
|
| - * for a piece of text, and after line-breaking on that text.
|
| - * It is not necessary if each paragraph is treated as a single line.<p>
|
| - *
|
| - * After line-breaking, rules (L1) and (L2) for the treatment of
|
| - * trailing WS and for reordering are performed on
|
| - * a <code>UBiDi</code> object that represents a line.<p>
|
| - *
|
| - * <strong>Important: </strong><code>pLineBiDi</code> shares data with
|
| - * <code>pParaBiDi</code>.
|
| - * You must destroy or reuse <code>pLineBiDi</code> before <code>pParaBiDi</code>.
|
| - * In other words, you must destroy or reuse the <code>UBiDi</code> object for a line
|
| - * before the object for its parent paragraph.<p>
|
| - *
|
| - * The text pointer that was stored in <code>pParaBiDi</code> is also copied,
|
| - * and <code>start</code> is added to it so that it points to the beginning of the
|
| - * line for this object.
|
| - *
|
| - * @param pParaBiDi is the parent paragraph object. It must have been set
|
| - * by a successful call to ubidi_setPara.
|
| - *
|
| - * @param start is the line's first index into the text.
|
| - *
|
| - * @param limit is just behind the line's last index into the text
|
| - * (its last index +1).<br>
|
| - * It must be <code>0<=start<limit<=</code>containing paragraph limit.
|
| - * If the specified line crosses a paragraph boundary, the function
|
| - * will terminate with error code U_ILLEGAL_ARGUMENT_ERROR.
|
| - *
|
| - * @param pLineBiDi is the object that will now represent a line of the text.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @see ubidi_setPara
|
| - * @see ubidi_getProcessedLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_setLine(const UBiDi *pParaBiDi,
|
| - int32_t start, int32_t limit,
|
| - UBiDi *pLineBiDi,
|
| - UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get the directionality of the text.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @return a value of <code>UBIDI_LTR</code>, <code>UBIDI_RTL</code>
|
| - * or <code>UBIDI_MIXED</code>
|
| - * that indicates if the entire text
|
| - * represented by this object is unidirectional,
|
| - * and which direction, or if it is mixed-directional.
|
| - * Note - The value <code>UBIDI_NEUTRAL</code> is never returned from this method.
|
| - *
|
| - * @see UBiDiDirection
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE UBiDiDirection U_EXPORT2
|
| -ubidi_getDirection(const UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Gets the base direction of the text provided according
|
| - * to the Unicode Bidirectional Algorithm. The base direction
|
| - * is derived from the first character in the string with bidirectional
|
| - * character type L, R, or AL. If the first such character has type L,
|
| - * <code>UBIDI_LTR</code> is returned. If the first such character has
|
| - * type R or AL, <code>UBIDI_RTL</code> is returned. If the string does
|
| - * not contain any character of these types, then
|
| - * <code>UBIDI_NEUTRAL</code> is returned.
|
| - *
|
| - * This is a lightweight function for use when only the base direction
|
| - * is needed and no further bidi processing of the text is needed.
|
| - *
|
| - * @param text is a pointer to the text whose base
|
| - * direction is needed.
|
| - * Note: the text must be (at least) @c length long.
|
| - *
|
| - * @param length is the length of the text;
|
| - * if <code>length==-1</code> then the text
|
| - * must be zero-terminated.
|
| - *
|
| - * @return <code>UBIDI_LTR</code>, <code>UBIDI_RTL</code>,
|
| - * <code>UBIDI_NEUTRAL</code>
|
| - *
|
| - * @see UBiDiDirection
|
| - * @draft ICU 4.6
|
| - */
|
| -U_DRAFT UBiDiDirection U_EXPORT2
|
| -ubidi_getBaseDirection(const UChar *text, int32_t length );
|
| -
|
| -/**
|
| - * Get the pointer to the text.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @return The pointer to the text that the UBiDi object was created for.
|
| - *
|
| - * @see ubidi_setPara
|
| - * @see ubidi_setLine
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE const UChar * U_EXPORT2
|
| -ubidi_getText(const UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Get the length of the text.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @return The length of the text that the UBiDi object was created for.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_getLength(const UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Get the paragraph level of the text.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @return The paragraph level. If there are multiple paragraphs, their
|
| - * level may vary if the required paraLevel is UBIDI_DEFAULT_LTR or
|
| - * UBIDI_DEFAULT_RTL. In that case, the level of the first paragraph
|
| - * is returned.
|
| - *
|
| - * @see UBiDiLevel
|
| - * @see ubidi_getParagraph
|
| - * @see ubidi_getParagraphByIndex
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE UBiDiLevel U_EXPORT2
|
| -ubidi_getParaLevel(const UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Get the number of paragraphs.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @return The number of paragraphs.
|
| - * @stable ICU 3.4
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_countParagraphs(UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Get a paragraph, given a position within the text.
|
| - * This function returns information about a paragraph.<br>
|
| - * Note: if the paragraph index is known, it is more efficient to
|
| - * retrieve the paragraph information using ubidi_getParagraphByIndex().<p>
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param charIndex is the index of a character within the text, in the
|
| - * range <code>[0..ubidi_getProcessedLength(pBiDi)-1]</code>.
|
| - *
|
| - * @param pParaStart will receive the index of the first character of the
|
| - * paragraph in the text.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pParaLimit will receive the limit of the paragraph.
|
| - * The l-value that you point to here may be the
|
| - * same expression (variable) as the one for
|
| - * <code>charIndex</code>.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pParaLevel will receive the level of the paragraph.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return The index of the paragraph containing the specified position.
|
| - *
|
| - * @see ubidi_getProcessedLength
|
| - * @stable ICU 3.4
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_getParagraph(const UBiDi *pBiDi, int32_t charIndex, int32_t *pParaStart,
|
| - int32_t *pParaLimit, UBiDiLevel *pParaLevel,
|
| - UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get a paragraph, given the index of this paragraph.
|
| - *
|
| - * This function returns information about a paragraph.<p>
|
| - *
|
| - * @param pBiDi is the paragraph <code>UBiDi</code> object.
|
| - *
|
| - * @param paraIndex is the number of the paragraph, in the
|
| - * range <code>[0..ubidi_countParagraphs(pBiDi)-1]</code>.
|
| - *
|
| - * @param pParaStart will receive the index of the first character of the
|
| - * paragraph in the text.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pParaLimit will receive the limit of the paragraph.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pParaLevel will receive the level of the paragraph.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @stable ICU 3.4
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_getParagraphByIndex(const UBiDi *pBiDi, int32_t paraIndex,
|
| - int32_t *pParaStart, int32_t *pParaLimit,
|
| - UBiDiLevel *pParaLevel, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get the level for one character.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param charIndex the index of a character. It must be in the range
|
| - * [0..ubidi_getProcessedLength(pBiDi)].
|
| - *
|
| - * @return The level for the character at charIndex (0 if charIndex is not
|
| - * in the valid range).
|
| - *
|
| - * @see UBiDiLevel
|
| - * @see ubidi_getProcessedLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE UBiDiLevel U_EXPORT2
|
| -ubidi_getLevelAt(const UBiDi *pBiDi, int32_t charIndex);
|
| -
|
| -/**
|
| - * Get an array of levels for each character.<p>
|
| - *
|
| - * Note that this function may allocate memory under some
|
| - * circumstances, unlike <code>ubidi_getLevelAt()</code>.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object, whose
|
| - * text length must be strictly positive.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return The levels array for the text,
|
| - * or <code>NULL</code> if an error occurs.
|
| - *
|
| - * @see UBiDiLevel
|
| - * @see ubidi_getProcessedLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE const UBiDiLevel * U_EXPORT2
|
| -ubidi_getLevels(UBiDi *pBiDi, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get a logical run.
|
| - * This function returns information about a run and is used
|
| - * to retrieve runs in logical order.<p>
|
| - * This is especially useful for line-breaking on a paragraph.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param logicalPosition is a logical position within the source text.
|
| - *
|
| - * @param pLogicalLimit will receive the limit of the corresponding run.
|
| - * The l-value that you point to here may be the
|
| - * same expression (variable) as the one for
|
| - * <code>logicalPosition</code>.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @param pLevel will receive the level of the corresponding run.
|
| - * This pointer can be <code>NULL</code> if this
|
| - * value is not necessary.
|
| - *
|
| - * @see ubidi_getProcessedLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_getLogicalRun(const UBiDi *pBiDi, int32_t logicalPosition,
|
| - int32_t *pLogicalLimit, UBiDiLevel *pLevel);
|
| -
|
| -/**
|
| - * Get the number of runs.
|
| - * This function may invoke the actual reordering on the
|
| - * <code>UBiDi</code> object, after <code>ubidi_setPara()</code>
|
| - * may have resolved only the levels of the text. Therefore,
|
| - * <code>ubidi_countRuns()</code> may have to allocate memory,
|
| - * and may fail doing so.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return The number of runs.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_countRuns(UBiDi *pBiDi, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get one run's logical start, length, and directionality,
|
| - * which can be 0 for LTR or 1 for RTL.
|
| - * In an RTL run, the character at the logical start is
|
| - * visually on the right of the displayed run.
|
| - * The length is the number of characters in the run.<p>
|
| - * <code>ubidi_countRuns()</code> should be called
|
| - * before the runs are retrieved.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param runIndex is the number of the run in visual order, in the
|
| - * range <code>[0..ubidi_countRuns(pBiDi)-1]</code>.
|
| - *
|
| - * @param pLogicalStart is the first logical character index in the text.
|
| - * The pointer may be <code>NULL</code> if this index is not needed.
|
| - *
|
| - * @param pLength is the number of characters (at least one) in the run.
|
| - * The pointer may be <code>NULL</code> if this is not needed.
|
| - *
|
| - * @return the directionality of the run,
|
| - * <code>UBIDI_LTR==0</code> or <code>UBIDI_RTL==1</code>,
|
| - * never <code>UBIDI_MIXED</code>,
|
| - * never <code>UBIDI_NEUTRAL</code>.
|
| - *
|
| - * @see ubidi_countRuns
|
| - *
|
| - * Example:
|
| - * <pre>
|
| - * \code
|
| - * int32_t i, count=ubidi_countRuns(pBiDi),
|
| - * logicalStart, visualIndex=0, length;
|
| - * for(i=0; i<count; ++i) {
|
| - * if(UBIDI_LTR==ubidi_getVisualRun(pBiDi, i, &logicalStart, &length)) {
|
| - * do { // LTR
|
| - * show_char(text[logicalStart++], visualIndex++);
|
| - * } while(--length>0);
|
| - * } else {
|
| - * logicalStart+=length; // logicalLimit
|
| - * do { // RTL
|
| - * show_char(text[--logicalStart], visualIndex++);
|
| - * } while(--length>0);
|
| - * }
|
| - * }
|
| - *\endcode
|
| - * </pre>
|
| - *
|
| - * Note that in right-to-left runs, code like this places
|
| - * second surrogates before first ones (which is generally a bad idea)
|
| - * and combining characters before base characters.
|
| - * <p>
|
| - * Use of <code>ubidi_writeReordered()</code>, optionally with the
|
| - * <code>#UBIDI_KEEP_BASE_COMBINING</code> option, can be considered in order
|
| - * to avoid these issues.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE UBiDiDirection U_EXPORT2
|
| -ubidi_getVisualRun(UBiDi *pBiDi, int32_t runIndex,
|
| - int32_t *pLogicalStart, int32_t *pLength);
|
| -
|
| -/**
|
| - * Get the visual position from a logical text position.
|
| - * If such a mapping is used many times on the same
|
| - * <code>UBiDi</code> object, then calling
|
| - * <code>ubidi_getLogicalMap()</code> is more efficient.<p>
|
| - *
|
| - * The value returned may be <code>#UBIDI_MAP_NOWHERE</code> if there is no
|
| - * visual position because the corresponding text character is a Bidi control
|
| - * removed from output by the option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>.
|
| - * <p>
|
| - * When the visual output is altered by using options of
|
| - * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
|
| - * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
|
| - * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the visual position returned may not
|
| - * be correct. It is advised to use, when possible, reordering options
|
| - * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
|
| - * <p>
|
| - * Note that in right-to-left runs, this mapping places
|
| - * second surrogates before first ones (which is generally a bad idea)
|
| - * and combining characters before base characters.
|
| - * Use of <code>ubidi_writeReordered()</code>, optionally with the
|
| - * <code>#UBIDI_KEEP_BASE_COMBINING</code> option can be considered instead
|
| - * of using the mapping, in order to avoid these issues.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param logicalIndex is the index of a character in the text.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return The visual position of this character.
|
| - *
|
| - * @see ubidi_getLogicalMap
|
| - * @see ubidi_getLogicalIndex
|
| - * @see ubidi_getProcessedLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_getVisualIndex(UBiDi *pBiDi, int32_t logicalIndex, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get the logical text position from a visual position.
|
| - * If such a mapping is used many times on the same
|
| - * <code>UBiDi</code> object, then calling
|
| - * <code>ubidi_getVisualMap()</code> is more efficient.<p>
|
| - *
|
| - * The value returned may be <code>#UBIDI_MAP_NOWHERE</code> if there is no
|
| - * logical position because the corresponding text character is a Bidi mark
|
| - * inserted in the output by option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
|
| - * <p>
|
| - * This is the inverse function to <code>ubidi_getVisualIndex()</code>.
|
| - * <p>
|
| - * When the visual output is altered by using options of
|
| - * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
|
| - * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
|
| - * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the logical position returned may not
|
| - * be correct. It is advised to use, when possible, reordering options
|
| - * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param visualIndex is the visual position of a character.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return The index of this character in the text.
|
| - *
|
| - * @see ubidi_getVisualMap
|
| - * @see ubidi_getVisualIndex
|
| - * @see ubidi_getResultLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_getLogicalIndex(UBiDi *pBiDi, int32_t visualIndex, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get a logical-to-visual index map (array) for the characters in the UBiDi
|
| - * (paragraph or line) object.
|
| - * <p>
|
| - * Some values in the map may be <code>#UBIDI_MAP_NOWHERE</code> if the
|
| - * corresponding text characters are Bidi controls removed from the visual
|
| - * output by the option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code>.
|
| - * <p>
|
| - * When the visual output is altered by using options of
|
| - * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
|
| - * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
|
| - * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the visual positions returned may not
|
| - * be correct. It is advised to use, when possible, reordering options
|
| - * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
|
| - * <p>
|
| - * Note that in right-to-left runs, this mapping places
|
| - * second surrogates before first ones (which is generally a bad idea)
|
| - * and combining characters before base characters.
|
| - * Use of <code>ubidi_writeReordered()</code>, optionally with the
|
| - * <code>#UBIDI_KEEP_BASE_COMBINING</code> option can be considered instead
|
| - * of using the mapping, in order to avoid these issues.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param indexMap is a pointer to an array of <code>ubidi_getProcessedLength()</code>
|
| - * indexes which will reflect the reordering of the characters.
|
| - * If option <code>#UBIDI_OPTION_INSERT_MARKS</code> is set, the number
|
| - * of elements allocated in <code>indexMap</code> must be no less than
|
| - * <code>ubidi_getResultLength()</code>.
|
| - * The array does not need to be initialized.<br><br>
|
| - * The index map will result in <code>indexMap[logicalIndex]==visualIndex</code>.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @see ubidi_getVisualMap
|
| - * @see ubidi_getVisualIndex
|
| - * @see ubidi_getProcessedLength
|
| - * @see ubidi_getResultLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_getLogicalMap(UBiDi *pBiDi, int32_t *indexMap, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get a visual-to-logical index map (array) for the characters in the UBiDi
|
| - * (paragraph or line) object.
|
| - * <p>
|
| - * Some values in the map may be <code>#UBIDI_MAP_NOWHERE</code> if the
|
| - * corresponding text characters are Bidi marks inserted in the visual output
|
| - * by the option <code>#UBIDI_OPTION_INSERT_MARKS</code>.
|
| - * <p>
|
| - * When the visual output is altered by using options of
|
| - * <code>ubidi_writeReordered()</code> such as <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
|
| - * <code>UBIDI_KEEP_BASE_COMBINING</code>, <code>UBIDI_OUTPUT_REVERSE</code>,
|
| - * <code>UBIDI_REMOVE_BIDI_CONTROLS</code>, the logical positions returned may not
|
| - * be correct. It is advised to use, when possible, reordering options
|
| - * such as <code>UBIDI_OPTION_INSERT_MARKS</code> and <code>UBIDI_OPTION_REMOVE_CONTROLS</code>.
|
| - *
|
| - * @param pBiDi is the paragraph or line <code>UBiDi</code> object.
|
| - *
|
| - * @param indexMap is a pointer to an array of <code>ubidi_getResultLength()</code>
|
| - * indexes which will reflect the reordering of the characters.
|
| - * If option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> is set, the number
|
| - * of elements allocated in <code>indexMap</code> must be no less than
|
| - * <code>ubidi_getProcessedLength()</code>.
|
| - * The array does not need to be initialized.<br><br>
|
| - * The index map will result in <code>indexMap[visualIndex]==logicalIndex</code>.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @see ubidi_getLogicalMap
|
| - * @see ubidi_getLogicalIndex
|
| - * @see ubidi_getProcessedLength
|
| - * @see ubidi_getResultLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_getVisualMap(UBiDi *pBiDi, int32_t *indexMap, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * This is a convenience function that does not use a UBiDi object.
|
| - * It is intended to be used for when an application has determined the levels
|
| - * of objects (character sequences) and just needs to have them reordered (L2).
|
| - * This is equivalent to using <code>ubidi_getLogicalMap()</code> on a
|
| - * <code>UBiDi</code> object.
|
| - *
|
| - * @param levels is an array with <code>length</code> levels that have been determined by
|
| - * the application.
|
| - *
|
| - * @param length is the number of levels in the array, or, semantically,
|
| - * the number of objects to be reordered.
|
| - * It must be <code>length>0</code>.
|
| - *
|
| - * @param indexMap is a pointer to an array of <code>length</code>
|
| - * indexes which will reflect the reordering of the characters.
|
| - * The array does not need to be initialized.<p>
|
| - * The index map will result in <code>indexMap[logicalIndex]==visualIndex</code>.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_reorderLogical(const UBiDiLevel *levels, int32_t length, int32_t *indexMap);
|
| -
|
| -/**
|
| - * This is a convenience function that does not use a UBiDi object.
|
| - * It is intended to be used for when an application has determined the levels
|
| - * of objects (character sequences) and just needs to have them reordered (L2).
|
| - * This is equivalent to using <code>ubidi_getVisualMap()</code> on a
|
| - * <code>UBiDi</code> object.
|
| - *
|
| - * @param levels is an array with <code>length</code> levels that have been determined by
|
| - * the application.
|
| - *
|
| - * @param length is the number of levels in the array, or, semantically,
|
| - * the number of objects to be reordered.
|
| - * It must be <code>length>0</code>.
|
| - *
|
| - * @param indexMap is a pointer to an array of <code>length</code>
|
| - * indexes which will reflect the reordering of the characters.
|
| - * The array does not need to be initialized.<p>
|
| - * The index map will result in <code>indexMap[visualIndex]==logicalIndex</code>.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_reorderVisual(const UBiDiLevel *levels, int32_t length, int32_t *indexMap);
|
| -
|
| -/**
|
| - * Invert an index map.
|
| - * The index mapping of the first map is inverted and written to
|
| - * the second one.
|
| - *
|
| - * @param srcMap is an array with <code>length</code> elements
|
| - * which defines the original mapping from a source array containing
|
| - * <code>length</code> elements to a destination array.
|
| - * Some elements of the source array may have no mapping in the
|
| - * destination array. In that case, their value will be
|
| - * the special value <code>UBIDI_MAP_NOWHERE</code>.
|
| - * All elements must be >=0 or equal to <code>UBIDI_MAP_NOWHERE</code>.
|
| - * Some elements may have a value >= <code>length</code>, if the
|
| - * destination array has more elements than the source array.
|
| - * There must be no duplicate indexes (two or more elements with the
|
| - * same value except <code>UBIDI_MAP_NOWHERE</code>).
|
| - *
|
| - * @param destMap is an array with a number of elements equal to 1 + the highest
|
| - * value in <code>srcMap</code>.
|
| - * <code>destMap</code> will be filled with the inverse mapping.
|
| - * If element with index i in <code>srcMap</code> has a value k different
|
| - * from <code>UBIDI_MAP_NOWHERE</code>, this means that element i of
|
| - * the source array maps to element k in the destination array.
|
| - * The inverse map will have value i in its k-th element.
|
| - * For all elements of the destination array which do not map to
|
| - * an element in the source array, the corresponding element in the
|
| - * inverse map will have a value equal to <code>UBIDI_MAP_NOWHERE</code>.
|
| - *
|
| - * @param length is the length of each array.
|
| - * @see UBIDI_MAP_NOWHERE
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_invertMap(const int32_t *srcMap, int32_t *destMap, int32_t length);
|
| -
|
| -/** option flags for ubidi_writeReordered() */
|
| -
|
| -/**
|
| - * option bit for ubidi_writeReordered():
|
| - * keep combining characters after their base characters in RTL runs
|
| - *
|
| - * @see ubidi_writeReordered
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_KEEP_BASE_COMBINING 1
|
| -
|
| -/**
|
| - * option bit for ubidi_writeReordered():
|
| - * replace characters with the "mirrored" property in RTL runs
|
| - * by their mirror-image mappings
|
| - *
|
| - * @see ubidi_writeReordered
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_DO_MIRRORING 2
|
| -
|
| -/**
|
| - * option bit for ubidi_writeReordered():
|
| - * surround the run with LRMs if necessary;
|
| - * this is part of the approximate "inverse Bidi" algorithm
|
| - *
|
| - * <p>This option does not imply corresponding adjustment of the index
|
| - * mappings.</p>
|
| - *
|
| - * @see ubidi_setInverse
|
| - * @see ubidi_writeReordered
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_INSERT_LRM_FOR_NUMERIC 4
|
| -
|
| -/**
|
| - * option bit for ubidi_writeReordered():
|
| - * remove Bidi control characters
|
| - * (this does not affect #UBIDI_INSERT_LRM_FOR_NUMERIC)
|
| - *
|
| - * <p>This option does not imply corresponding adjustment of the index
|
| - * mappings.</p>
|
| - *
|
| - * @see ubidi_writeReordered
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_REMOVE_BIDI_CONTROLS 8
|
| -
|
| -/**
|
| - * option bit for ubidi_writeReordered():
|
| - * write the output in reverse order
|
| - *
|
| - * <p>This has the same effect as calling <code>ubidi_writeReordered()</code>
|
| - * first without this option, and then calling
|
| - * <code>ubidi_writeReverse()</code> without mirroring.
|
| - * Doing this in the same step is faster and avoids a temporary buffer.
|
| - * An example for using this option is output to a character terminal that
|
| - * is designed for RTL scripts and stores text in reverse order.</p>
|
| - *
|
| - * @see ubidi_writeReordered
|
| - * @stable ICU 2.0
|
| - */
|
| -#define UBIDI_OUTPUT_REVERSE 16
|
| -
|
| -/**
|
| - * Get the length of the source text processed by the last call to
|
| - * <code>ubidi_setPara()</code>. This length may be different from the length
|
| - * of the source text if option <code>#UBIDI_OPTION_STREAMING</code>
|
| - * has been set.
|
| - * <br>
|
| - * Note that whenever the length of the text affects the execution or the
|
| - * result of a function, it is the processed length which must be considered,
|
| - * except for <code>ubidi_setPara</code> (which receives unprocessed source
|
| - * text) and <code>ubidi_getLength</code> (which returns the original length
|
| - * of the source text).<br>
|
| - * In particular, the processed length is the one to consider in the following
|
| - * cases:
|
| - * <ul>
|
| - * <li>maximum value of the <code>limit</code> argument of
|
| - * <code>ubidi_setLine</code></li>
|
| - * <li>maximum value of the <code>charIndex</code> argument of
|
| - * <code>ubidi_getParagraph</code></li>
|
| - * <li>maximum value of the <code>charIndex</code> argument of
|
| - * <code>ubidi_getLevelAt</code></li>
|
| - * <li>number of elements in the array returned by <code>ubidi_getLevels</code></li>
|
| - * <li>maximum value of the <code>logicalStart</code> argument of
|
| - * <code>ubidi_getLogicalRun</code></li>
|
| - * <li>maximum value of the <code>logicalIndex</code> argument of
|
| - * <code>ubidi_getVisualIndex</code></li>
|
| - * <li>number of elements filled in the <code>*indexMap</code> argument of
|
| - * <code>ubidi_getLogicalMap</code></li>
|
| - * <li>length of text processed by <code>ubidi_writeReordered</code></li>
|
| - * </ul>
|
| - *
|
| - * @param pBiDi is the paragraph <code>UBiDi</code> object.
|
| - *
|
| - * @return The length of the part of the source text processed by
|
| - * the last call to <code>ubidi_setPara</code>.
|
| - * @see ubidi_setPara
|
| - * @see UBIDI_OPTION_STREAMING
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_getProcessedLength(const UBiDi *pBiDi);
|
| -
|
| -/**
|
| - * Get the length of the reordered text resulting from the last call to
|
| - * <code>ubidi_setPara()</code>. This length may be different from the length
|
| - * of the source text if option <code>#UBIDI_OPTION_INSERT_MARKS</code>
|
| - * or option <code>#UBIDI_OPTION_REMOVE_CONTROLS</code> has been set.
|
| - * <br>
|
| - * This resulting length is the one to consider in the following cases:
|
| - * <ul>
|
| - * <li>maximum value of the <code>visualIndex</code> argument of
|
| - * <code>ubidi_getLogicalIndex</code></li>
|
| - * <li>number of elements of the <code>*indexMap</code> argument of
|
| - * <code>ubidi_getVisualMap</code></li>
|
| - * </ul>
|
| - * Note that this length stays identical to the source text length if
|
| - * Bidi marks are inserted or removed using option bits of
|
| - * <code>ubidi_writeReordered</code>, or if option
|
| - * <code>#UBIDI_REORDER_INVERSE_NUMBERS_AS_L</code> has been set.
|
| - *
|
| - * @param pBiDi is the paragraph <code>UBiDi</code> object.
|
| - *
|
| - * @return The length of the reordered text resulting from
|
| - * the last call to <code>ubidi_setPara</code>.
|
| - * @see ubidi_setPara
|
| - * @see UBIDI_OPTION_INSERT_MARKS
|
| - * @see UBIDI_OPTION_REMOVE_CONTROLS
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_getResultLength(const UBiDi *pBiDi);
|
| -
|
| -U_CDECL_BEGIN
|
| -/**
|
| - * value returned by <code>UBiDiClassCallback</code> callbacks when
|
| - * there is no need to override the standard Bidi class for a given code point.
|
| - * @see UBiDiClassCallback
|
| - * @stable ICU 3.6
|
| - */
|
| -#define U_BIDI_CLASS_DEFAULT U_CHAR_DIRECTION_COUNT
|
| -
|
| -/**
|
| - * Callback type declaration for overriding default Bidi class values with
|
| - * custom ones.
|
| - * <p>Usually, the function pointer will be propagated to a <code>UBiDi</code>
|
| - * object by calling the <code>ubidi_setClassCallback()</code> function;
|
| - * then the callback will be invoked by the UBA implementation any time the
|
| - * class of a character is to be determined.</p>
|
| - *
|
| - * @param context is a pointer to the callback private data.
|
| - *
|
| - * @param c is the code point to get a Bidi class for.
|
| - *
|
| - * @return The directional property / Bidi class for the given code point
|
| - * <code>c</code> if the default class has been overridden, or
|
| - * <code>#U_BIDI_CLASS_DEFAULT</code> if the standard Bidi class value
|
| - * for <code>c</code> is to be used.
|
| - * @see ubidi_setClassCallback
|
| - * @see ubidi_getClassCallback
|
| - * @stable ICU 3.6
|
| - */
|
| -typedef UCharDirection U_CALLCONV
|
| -UBiDiClassCallback(const void *context, UChar32 c);
|
| -
|
| -U_CDECL_END
|
| -
|
| -/**
|
| - * Retrieve the Bidi class for a given code point.
|
| - * <p>If a <code>#UBiDiClassCallback</code> callback is defined and returns a
|
| - * value other than <code>#U_BIDI_CLASS_DEFAULT</code>, that value is used;
|
| - * otherwise the default class determination mechanism is invoked.</p>
|
| - *
|
| - * @param pBiDi is the paragraph <code>UBiDi</code> object.
|
| - *
|
| - * @param c is the code point whose Bidi class must be retrieved.
|
| - *
|
| - * @return The Bidi class for character <code>c</code> based
|
| - * on the given <code>pBiDi</code> instance.
|
| - * @see UBiDiClassCallback
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE UCharDirection U_EXPORT2
|
| -ubidi_getCustomizedClass(UBiDi *pBiDi, UChar32 c);
|
| -
|
| -/**
|
| - * Set the callback function and callback data used by the UBA
|
| - * implementation for Bidi class determination.
|
| - * <p>This may be useful for assigning Bidi classes to PUA characters, or
|
| - * for special application needs. For instance, an application may want to
|
| - * handle all spaces like L or R characters (according to the base direction)
|
| - * when creating the visual ordering of logical lines which are part of a report
|
| - * organized in columns: there should not be interaction between adjacent
|
| - * cells.<p>
|
| - *
|
| - * @param pBiDi is the paragraph <code>UBiDi</code> object.
|
| - *
|
| - * @param newFn is the new callback function pointer.
|
| - *
|
| - * @param newContext is the new callback context pointer. This can be NULL.
|
| - *
|
| - * @param oldFn fillin: Returns the old callback function pointer. This can be
|
| - * NULL.
|
| - *
|
| - * @param oldContext fillin: Returns the old callback's context. This can be
|
| - * NULL.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @see ubidi_getClassCallback
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_setClassCallback(UBiDi *pBiDi, UBiDiClassCallback *newFn,
|
| - const void *newContext, UBiDiClassCallback **oldFn,
|
| - const void **oldContext, UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Get the current callback function used for Bidi class determination.
|
| - *
|
| - * @param pBiDi is the paragraph <code>UBiDi</code> object.
|
| - *
|
| - * @param fn fillin: Returns the callback function pointer.
|
| - *
|
| - * @param context fillin: Returns the callback's private context.
|
| - *
|
| - * @see ubidi_setClassCallback
|
| - * @stable ICU 3.6
|
| - */
|
| -U_STABLE void U_EXPORT2
|
| -ubidi_getClassCallback(UBiDi *pBiDi, UBiDiClassCallback **fn, const void **context);
|
| -
|
| -/**
|
| - * Take a <code>UBiDi</code> object containing the reordering
|
| - * information for a piece of text (one or more paragraphs) set by
|
| - * <code>ubidi_setPara()</code> or for a line of text set by
|
| - * <code>ubidi_setLine()</code> and write a reordered string to the
|
| - * destination buffer.
|
| - *
|
| - * This function preserves the integrity of characters with multiple
|
| - * code units and (optionally) combining characters.
|
| - * Characters in RTL runs can be replaced by mirror-image characters
|
| - * in the destination buffer. Note that "real" mirroring has
|
| - * to be done in a rendering engine by glyph selection
|
| - * and that for many "mirrored" characters there are no
|
| - * Unicode characters as mirror-image equivalents.
|
| - * There are also options to insert or remove Bidi control
|
| - * characters; see the description of the <code>destSize</code>
|
| - * and <code>options</code> parameters and of the option bit flags.
|
| - *
|
| - * @param pBiDi A pointer to a <code>UBiDi</code> object that
|
| - * is set by <code>ubidi_setPara()</code> or
|
| - * <code>ubidi_setLine()</code> and contains the reordering
|
| - * information for the text that it was defined for,
|
| - * as well as a pointer to that text.<br><br>
|
| - * The text was aliased (only the pointer was stored
|
| - * without copying the contents) and must not have been modified
|
| - * since the <code>ubidi_setPara()</code> call.
|
| - *
|
| - * @param dest A pointer to where the reordered text is to be copied.
|
| - * The source text and <code>dest[destSize]</code>
|
| - * must not overlap.
|
| - *
|
| - * @param destSize The size of the <code>dest</code> buffer,
|
| - * in number of UChars.
|
| - * If the <code>UBIDI_INSERT_LRM_FOR_NUMERIC</code>
|
| - * option is set, then the destination length could be
|
| - * as large as
|
| - * <code>ubidi_getLength(pBiDi)+2*ubidi_countRuns(pBiDi)</code>.
|
| - * If the <code>UBIDI_REMOVE_BIDI_CONTROLS</code> option
|
| - * is set, then the destination length may be less than
|
| - * <code>ubidi_getLength(pBiDi)</code>.
|
| - * If none of these options is set, then the destination length
|
| - * will be exactly <code>ubidi_getProcessedLength(pBiDi)</code>.
|
| - *
|
| - * @param options A bit set of options for the reordering that control
|
| - * how the reordered text is written.
|
| - * The options include mirroring the characters on a code
|
| - * point basis and inserting LRM characters, which is used
|
| - * especially for transforming visually stored text
|
| - * to logically stored text (although this is still an
|
| - * imperfect implementation of an "inverse Bidi" algorithm
|
| - * because it uses the "forward Bidi" algorithm at its core).
|
| - * The available options are:
|
| - * <code>#UBIDI_DO_MIRRORING</code>,
|
| - * <code>#UBIDI_INSERT_LRM_FOR_NUMERIC</code>,
|
| - * <code>#UBIDI_KEEP_BASE_COMBINING</code>,
|
| - * <code>#UBIDI_OUTPUT_REVERSE</code>,
|
| - * <code>#UBIDI_REMOVE_BIDI_CONTROLS</code>
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return The length of the output string.
|
| - *
|
| - * @see ubidi_getProcessedLength
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_writeReordered(UBiDi *pBiDi,
|
| - UChar *dest, int32_t destSize,
|
| - uint16_t options,
|
| - UErrorCode *pErrorCode);
|
| -
|
| -/**
|
| - * Reverse a Right-To-Left run of Unicode text.
|
| - *
|
| - * This function preserves the integrity of characters with multiple
|
| - * code units and (optionally) combining characters.
|
| - * Characters can be replaced by mirror-image characters
|
| - * in the destination buffer. Note that "real" mirroring has
|
| - * to be done in a rendering engine by glyph selection
|
| - * and that for many "mirrored" characters there are no
|
| - * Unicode characters as mirror-image equivalents.
|
| - * There are also options to insert or remove Bidi control
|
| - * characters.
|
| - *
|
| - * This function is the implementation for reversing RTL runs as part
|
| - * of <code>ubidi_writeReordered()</code>. For detailed descriptions
|
| - * of the parameters, see there.
|
| - * Since no Bidi controls are inserted here, the output string length
|
| - * will never exceed <code>srcLength</code>.
|
| - *
|
| - * @see ubidi_writeReordered
|
| - *
|
| - * @param src A pointer to the RTL run text.
|
| - *
|
| - * @param srcLength The length of the RTL run.
|
| - *
|
| - * @param dest A pointer to where the reordered text is to be copied.
|
| - * <code>src[srcLength]</code> and <code>dest[destSize]</code>
|
| - * must not overlap.
|
| - *
|
| - * @param destSize The size of the <code>dest</code> buffer,
|
| - * in number of UChars.
|
| - * If the <code>UBIDI_REMOVE_BIDI_CONTROLS</code> option
|
| - * is set, then the destination length may be less than
|
| - * <code>srcLength</code>.
|
| - * If this option is not set, then the destination length
|
| - * will be exactly <code>srcLength</code>.
|
| - *
|
| - * @param options A bit set of options for the reordering that control
|
| - * how the reordered text is written.
|
| - * See the <code>options</code> parameter in <code>ubidi_writeReordered()</code>.
|
| - *
|
| - * @param pErrorCode must be a valid pointer to an error code value.
|
| - *
|
| - * @return The length of the output string.
|
| - * @stable ICU 2.0
|
| - */
|
| -U_STABLE int32_t U_EXPORT2
|
| -ubidi_writeReverse(const UChar *src, int32_t srcLength,
|
| - UChar *dest, int32_t destSize,
|
| - uint16_t options,
|
| - UErrorCode *pErrorCode);
|
| -
|
| -/*#define BIDI_SAMPLE_CODE*/
|
| -/*@}*/
|
| -
|
| -#endif
|
|
|
Chromium Code Reviews
Issue 19276009:
Move ICU headers part 1 (Closed)
Base URL: svn://chrome-svn/chrome/trunk/deps/third_party/icu46/