| OLD | NEW |
|---|
| (Empty) |
| 1 # This Source Code Form is subject to the terms of the Mozilla Public | |
| 2 # License, v. 2.0. If a copy of the MPL was not distributed with this | |
| 3 # file, You can obtain one at http://mozilla.org/MPL/2.0/. | |
| 4 | |
| 5 SSL's Buffers: enumerated and explained. | |
| 6 | |
| 7 --------------------------------------------------------------------------- | |
| 8 incoming: | |
| 9 | |
| 10 gs = ss->gather | |
| 11 hs = ss->ssl3->hs | |
| 12 | |
| 13 gs->inbuf SSL3 only: incoming (encrypted) ssl records are placed here, | |
| 14 and then decrypted (or copied) to gs->buf. | |
| 15 | |
| 16 gs->buf SSL2: incoming SSL records are put here, and then decrypted | |
| 17 in place. | |
| 18 SSL3: ssl3_HandleHandshake puts decrypted ssl records here. | |
| 19 | |
| 20 hs.msg_body (SSL3 only) When an incoming handshake message spans more | |
| 21 than one ssl record, the first part(s) of it are accumulated | |
| 22 here until it all arrives. | |
| 23 | |
| 24 hs.msgState (SSL3 only) an alternative set of pointers/lengths for gs->buf. | |
| 25 Used only when a handleHandshake function returns SECWouldBlock. | |
| 26 ssl3_HandleHandshake remembers how far it previously got by | |
| 27 using these pointers instead of gs->buf when it is called | |
| 28 after a previous SECWouldBlock return. | |
| 29 | |
| 30 --------------------------------------------------------------------------- | |
| 31 outgoing: | |
| 32 | |
| 33 sec = ss->sec | |
| 34 ci = ss->sec->ci /* connect info */ | |
| 35 | |
| 36 ci->sendBuf Outgoing handshake messages are appended to this buffer. | |
| 37 This buffer will then be sent as a single SSL record. | |
| 38 | |
| 39 sec->writeBuf outgoing ssl records are constructed here and encrypted in | |
| 40 place before being written or copied to pendingBuf. | |
| 41 | |
| 42 ss->pendingBuf contains outgoing ciphertext that was saved after a write | |
| 43 attempt to the socket failed, e.g. EWouldBlock. | |
| 44 Generally empty with blocking sockets (should be no incomplete | |
| 45 writes). | |
| 46 | |
| 47 ss->saveBuf Used only by socks code. Intended to be used to buffer | |
| 48 outgoing data until a socks handshake completes. However, | |
| 49 this buffer is always empty. There is no code to put | |
| 50 anything into it. | |
| 51 | |
| 52 --------------------------------------------------------------------------- | |
| 53 | |
| 54 SECWouldBlock means that the function cannot make progress because it is | |
| 55 waiting for some event OTHER THAN socket I/O completion (e.g. waiting for | |
| 56 user dialog to finish). It is not the same as EWOULDBLOCK. | |
| 57 | |
| 58 --------------------------------------------------------------------------- | |
| 59 | |
| 60 Rank (order) of locks | |
| 61 | |
| 62 recvLock ->\ firstHandshake -> recvbuf -> ssl3Handshake -> xmitbuf -> "spec" | |
| 63 sendLock ->/ | |
| 64 | |
| 65 crypto and hash Data that must be protected while turning plaintext into | |
| 66 ciphertext: | |
| 67 | |
| 68 SSL2: (in ssl2_Send*) | |
| 69 sec->hash* | |
| 70 sec->hashcx (ptr and data) | |
| 71 sec->enc | |
| 72 sec->writecx* (ptr and content) | |
| 73 sec->sendSecret*(ptr and content) | |
| 74 sec->sendSequence locked by xmitBufLock | |
| 75 sec->blockSize | |
| 76 sec->writeBuf* (ptr & content) locked by xmitBufLock | |
| 77 "in" locked by xmitBufLock | |
| 78 | |
| 79 SSl3: (in ssl3_SendPlainText) | |
| 80 ss->ssl3 (the pointer) | |
| 81 ss->ssl3->current_write* (the pointer and the data in the spec | |
| 82 and any data referenced by the spec. | |
| 83 | |
| 84 ss->sec->isServer | |
| 85 ss->sec->writebuf* (ptr & content) locked by xmitBufLock | |
| 86 "buf" locked by xmitBufLock | |
| 87 | |
| 88 crypto and hash data that must be protected while turning ciphertext into | |
| 89 plaintext: | |
| 90 | |
| 91 SSL2: (in ssl2_GatherData) | |
| 92 gs->* (locked by recvBufLock ) | |
| 93 sec->dec | |
| 94 sec->readcx | |
| 95 sec->hash* (ptr and data) | |
| 96 sec->hashcx (ptr and data) | |
| 97 | |
| 98 SSL3: (in ssl3_HandleRecord ) | |
| 99 ssl3->current_read* (the pointer and all data refernced) | |
| 100 ss->sec->isServer | |
| 101 | |
| 102 | |
| 103 Data that must be protected while being used by a "writer": | |
| 104 | |
| 105 ss->pendingBuf.* | |
| 106 ss->saveBuf.* (which is dead) | |
| 107 | |
| 108 in ssl3_sendPlainText | |
| 109 | |
| 110 ss->ssl3->current_write-> (spec) | |
| 111 ss->sec->writeBuf.* | |
| 112 ss->sec->isServer | |
| 113 | |
| 114 in SendBlock | |
| 115 | |
| 116 ss->sec->hash->length | |
| 117 ss->sec->blockSize | |
| 118 ss->sec->writeBuf.* | |
| 119 ss->sec->sendSecret | |
| 120 ss->sec->sendSequence | |
| 121 ss->sec->writecx * | |
| 122 ss->pendingBuf | |
| 123 | |
| 124 -------------------------------------------------------------------------- | |
| 125 | |
| 126 Data variables (not const) protected by the "sslGlobalDataLock". | |
| 127 Note, this really should be a reader/writer lock. | |
| 128 | |
| 129 allowedByPolicy sslcon.c | |
| 130 maybeAllowedByPolicy sslcon.c | |
| 131 chosenPreference sslcon.c | |
| 132 policyWasSet sslcon.c | |
| 133 | |
| 134 cipherSuites[] ssl3con.c | |
| OLD | NEW |
|---|
Chromium Code Reviews
Issue 1882433002:
Removing NSS files and USE_OPENSSL flag (Closed)
Base URL: https://chromium.googlesource.com/chromium/src.git@master