Remove sandbox on Windows.

sandbox/win/src/sidestep/mini_disassembler.h

Index: sandbox/win/src/sidestep/mini_disassembler.h
diff --git a/sandbox/win/src/sidestep/mini_disassembler.h b/sandbox/win/src/sidestep/mini_disassembler.h
deleted file mode 100644
index 202c4ecc2041c2756ca05c9e9c95af7807d4bf91..0000000000000000000000000000000000000000
--- a/sandbox/win/src/sidestep/mini_disassembler.h
+++ /dev/null
@@ -1,156 +0,0 @@
-// Copyright (c) 2012 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that can be
-// found in the LICENSE file.
-
-// Definition of MiniDisassembler.
-
-#ifndef SANDBOX_SRC_SIDESTEP_MINI_DISASSEMBLER_H__
-#define SANDBOX_SRC_SIDESTEP_MINI_DISASSEMBLER_H__
-
-#include "sandbox/win/src/sidestep/mini_disassembler_types.h"
-
-namespace sidestep {
-
-// This small disassembler is very limited
-// in its functionality, and in fact does only the bare minimum required by the
-// preamble patching utility.  It may be useful for other purposes, however.
-//
-// The limitations include at least the following:
-//  -# No support for coprocessor opcodes, MMX, etc.
-//  -# No machine-readable identification of opcodes or decoding of
-//     assembly parameters. The name of the opcode (as a string) is given,
-//     however, to aid debugging.
-//
-// You may ask what this little disassembler actually does, then?  The answer is
-// that it does the following, which is exactly what the patching utility needs:
-//  -# Indicates if opcode is a jump (any kind) or a return (any kind)
-//     because this is important for the patching utility to determine if
-//     a function is too short or there are jumps too early in it for it
-//     to be preamble patched.
-//  -# The opcode length is always calculated, so that the patching utility
-//     can figure out where the next instruction starts, and whether it
-//     already has enough instructions to replace with the absolute jump
-//     to the patching code.
-//
-// The usage is quite simple; just create a MiniDisassembler and use its
-// Disassemble() method.
-//
-// If you would like to extend this disassembler, please refer to the
-// IA-32 Intel Architecture Software Developer's Manual Volume 2:
-// Instruction Set Reference for information about operand decoding
-// etc.
-class MiniDisassembler {
- public:
-
-  // Creates a new instance and sets defaults.
-  //
-  // operand_default_32_bits: If true, the default operand size is
-  // set to 32 bits, which is the default under Win32. Otherwise it is 16 bits.
-  // address_default_32_bits: If true, the default address size is
-  // set to 32 bits, which is the default under Win32. Otherwise it is 16 bits.
-  MiniDisassembler(bool operand_default_32_bits,
-                   bool address_default_32_bits);
-
-  // Equivalent to MiniDisassembler(true, true);
-  MiniDisassembler();
-
-  // Attempts to disassemble a single instruction starting from the
-  // address in memory it is pointed to.
-  //
-  // start: Address where disassembly should start.
-  // instruction_bytes: Variable that will be incremented by
-  // the length in bytes of the instruction.
-  // Returns enItJump, enItReturn or enItGeneric on success.  enItUnknown
-  // if unable to disassemble, enItUnused if this seems to be an unused
-  // opcode. In the last two (error) cases, cbInstruction will be set
-  // to 0xffffffff.
-  //
-  // Postcondition: This instance of the disassembler is ready to be used again,
-  // with unchanged defaults from creation time.
-  InstructionType Disassemble(unsigned char* start,
-                              unsigned int* instruction_bytes);
-
- private:
-
-  // Makes the disassembler ready for reuse.
-  void Initialize();
-
-  // Sets the flags for address and operand sizes.
-  // Returns Number of prefix bytes.
-  InstructionType ProcessPrefixes(unsigned char* start, unsigned int* size);
-
-  // Sets the flag for whether we have ModR/M, and increments
-  // operand_bytes_ if any are specifies by the opcode directly.
-  // Returns Number of opcode bytes.
-  InstructionType ProcessOpcode(unsigned char* start,
-                                unsigned int table,
-                                unsigned int* size);
-
-  // Checks the type of the supplied operand.  Increments
-  // operand_bytes_ if it directly indicates an immediate etc.
-  // operand.  Asserts have_modrm_ if the operand specifies
-  // a ModR/M byte.
-  bool ProcessOperand(int flag_operand);
-
-  // Increments operand_bytes_ by size specified by ModR/M and
-  // by SIB if present.
-  // Returns 0 in case of error, 1 if there is just a ModR/M byte,
-  // 2 if there is a ModR/M byte and a SIB byte.
-  bool ProcessModrm(unsigned char* start, unsigned int* size);
-
-  // Processes the SIB byte that it is pointed to.
-  // start: Pointer to the SIB byte.
-  // mod: The mod field from the ModR/M byte.
-  // Returns 1 to indicate success (indicates 1 SIB byte)
-  bool ProcessSib(unsigned char* start, unsigned char mod, unsigned int* size);
-
-  // The instruction type we have decoded from the opcode.
-  InstructionType instruction_type_;
-
-  // Counts the number of bytes that is occupied by operands in
-  // the current instruction (note: we don't care about how large
-  // operands stored in registers etc. are).
-  unsigned int operand_bytes_;
-
-  // True iff there is a ModR/M byte in this instruction.
-  bool have_modrm_;
-
-  // True iff we need to decode the ModR/M byte (sometimes it just
-  // points to a register, we can tell by the addressing mode).
-  bool should_decode_modrm_;
-
-  // Current operand size is 32 bits if true, 16 bits if false.
-  bool operand_is_32_bits_;
-
-  // Default operand size is 32 bits if true, 16 bits if false.
-  bool operand_default_is_32_bits_;
-
-  // Current address size is 32 bits if true, 16 bits if false.
-  bool address_is_32_bits_;
-
-  // Default address size is 32 bits if true, 16 bits if false.
-  bool address_default_is_32_bits_;
-
-  // Huge big opcode table based on the IA-32 manual, defined
-  // in Ia32OpcodeMap.cpp
-  static const OpcodeTable s_ia32_opcode_map_[];
-
-  // Somewhat smaller table to help with decoding ModR/M bytes
-  // when 16-bit addressing mode is being used.  Defined in
-  // Ia32ModrmMap.cpp
-  static const ModrmEntry s_ia16_modrm_map_[];
-
-  // Somewhat smaller table to help with decoding ModR/M bytes
-  // when 32-bit addressing mode is being used.  Defined in
-  // Ia32ModrmMap.cpp
-  static const ModrmEntry s_ia32_modrm_map_[];
-
-  // Indicators of whether we got certain prefixes that certain
-  // silly Intel instructions depend on in nonstandard ways for
-  // their behaviors.
-  bool got_f2_prefix_, got_f3_prefix_, got_66_prefix_;
-};
-
-};  // namespace sidestep
-
-#endif  // SANDBOX_SRC_SIDESTEP_MINI_DISASSEMBLER_H__