Index: src/third_party/libdisasm/ia32_insn.h |
diff --git a/src/third_party/libdisasm/ia32_insn.h b/src/third_party/libdisasm/ia32_insn.h |
deleted file mode 100644 |
index d3f36c3b2058926462cc7e69b21b4f9ee96743f4..0000000000000000000000000000000000000000 |
--- a/src/third_party/libdisasm/ia32_insn.h |
+++ /dev/null |
@@ -1,506 +0,0 @@ |
-#ifndef IA32_INSN_H |
-#define IA32_INSN_H |
-/* this file contains the structure of opcode definitions and the |
- * constants they use */ |
- |
-#include <sys/types.h> |
-#include "libdis.h" |
- |
- |
-#define GET_BYTE( buf, buf_len ) buf_len ? *buf : 0 |
- |
-#define OP_SIZE_16 1 |
-#define OP_SIZE_32 2 |
-#define ADDR_SIZE_16 4 |
-#define ADDR_SIZE_32 8 |
- |
-#define MAX_INSTRUCTION_SIZE 20 |
- |
-/* invalid instructions are handled by returning 0 [error] from the |
- * function, setting the size of the insn to 1 byte, and copying |
- * the byte at the start of the invalid insn into the x86_insn_t. |
- * if the caller is saving the x86_insn_t for invalid instructions, |
- * instead of discarding them, this will maintain a consistent |
- * address space in the x86_insn_ts */ |
- |
-#define INVALID_INSN ((size_t) -1) /* return value for invalid insn */ |
-#define MAKE_INVALID( i, buf ) \ |
- strcpy( i->mnemonic, "invalid" ); \ |
- x86_oplist_free( i ); \ |
- i->size = 1; \ |
- i->group = insn_none; \ |
- i->type = insn_invalid; \ |
- memcpy( i->bytes, buf, 1 ); |
- |
- |
-size_t ia32_disasm_addr( unsigned char * buf, size_t buf_len, |
- x86_insn_t *insn); |
- |
- |
-/* --------------------------------------------------------- Table Lookup */ |
-/* IA32 Instruction defintion for ia32_opcodes.c */ |
-typedef struct { |
- unsigned int table; /* escape to this sub-table */ |
- unsigned int mnem_flag; /* Flags referring to mnemonic */ |
- unsigned int notes; /* Notes for this instruction */ |
- unsigned int dest_flag, src_flag, aux_flag; /* and for specific operands */ |
- unsigned int cpu; /* minimumCPU [AND with clocks?? */ |
- char mnemonic[16]; /* buffers for building instruction */ |
- char mnemonic_att[16]; /* at&t style mnemonic name */ |
- int32_t dest; |
- int32_t src; |
- int32_t aux; |
- unsigned int flags_effected; |
- unsigned int implicit_ops; /* implicit operands */ |
-} ia32_insn_t; |
- |
- |
- |
-/* --------------------------------------------------------- Prefixes */ |
-/* Prefix Flags */ |
-/* Prefixes, same order as in the manual */ |
-/* had to reverse the values of the first three as they were entered into |
- * libdis.h incorrectly. */ |
-#define PREFIX_LOCK 0x0004 |
-#define PREFIX_REPNZ 0x0002 |
-#define PREFIX_REPZ 0x0001 |
-#define PREFIX_OP_SIZE 0x0010 |
-#define PREFIX_ADDR_SIZE 0x0020 |
-#define PREFIX_CS 0x0100 |
-#define PREFIX_SS 0x0200 |
-#define PREFIX_DS 0x0300 |
-#define PREFIX_ES 0x0400 |
-#define PREFIX_FS 0x0500 |
-#define PREFIX_GS 0x0600 |
-#define PREFIX_TAKEN 0x1000 /* branch taken */ |
-#define PREFIX_NOTTAKEN 0x2000 /* branch not taken */ |
-#define PREFIX_REG_MASK 0x0F00 |
-#define BRANCH_HINT_MASK 0x3000 |
-#define PREFIX_PRINT_MASK 0x000F /* printable prefixes */ |
-#define PREFIX_MASK 0xFFFF |
- |
-/* ---------------------------------------------------------- CPU Type */ |
- |
-#define cpu_8086 0x0001 |
-#define cpu_80286 0x0002 |
-#define cpu_80386 0x0003 |
-#define cpu_80387 0x0004 /* originally these were a co-proc */ |
-#define cpu_80486 0x0005 |
-#define cpu_PENTIUM 0x0006 |
-#define cpu_PENTPRO 0x0007 |
-#define cpu_PENTIUM2 0x0008 |
-#define cpu_PENTIUM3 0x0009 |
-#define cpu_PENTIUM4 0x000A |
-#define cpu_K6 0x0010 |
-#define cpu_K7 0x0020 |
-#define cpu_ATHLON 0x0030 |
-#define CPU_MODEL_MASK 0xFFFF |
-#define CPU_MODEL(cpu) (cpu & CPU_MODEL_MASK) |
-/* intel instruction subsets */ |
-#define isa_GP 0x10000 /* General Purpose Instructions */ |
-#define isa_FPU 0x20000 /* FPU instructions */ |
-#define isa_FPUMGT 0x30000 /* FPU/SIMD Management */ |
-#define isa_MMX 0x40000 /* MMX */ |
-#define isa_SSE1 0x50000 /* SSE */ |
-#define isa_SSE2 0x60000 /* SSE 2 */ |
-#define isa_SSE3 0x70000 /* SSE 3 */ |
-#define isa_3DNOW 0x80000 /* AMD 3d Now */ |
-#define isa_SYS 0x90000 /* System Instructions */ |
-#define ISA_SUBSET_MASK 0xFFFF0000 |
-#define ISA_SUBSET(isa) (isa & ISA_SUBSET_MASK) |
- |
- |
-/* ------------------------------------------------------ Operand Decoding */ |
-#define ARG_NONE 0 |
- |
-/* Using a mask allows us to store info such as OP_SIGNED in the |
- * operand flags field */ |
-#define OPFLAGS_MASK 0x0000FFFF |
- |
-/* Operand Addressing Methods, per intel manual */ |
-#define ADDRMETH_MASK 0x00FF0000 |
- |
-/* note: for instructions with implied operands, use no ADDRMETH */ |
-#define ADDRMETH_A 0x00010000 |
-#define ADDRMETH_C 0x00020000 |
-#define ADDRMETH_D 0x00030000 |
-#define ADDRMETH_E 0x00040000 |
-#define ADDRMETH_F 0x00050000 |
-#define ADDRMETH_G 0x00060000 |
-#define ADDRMETH_I 0x00070000 |
-#define ADDRMETH_J 0x00080000 |
-#define ADDRMETH_M 0x00090000 |
-#define ADDRMETH_O 0x000A0000 |
-#define ADDRMETH_P 0x000B0000 |
-#define ADDRMETH_Q 0x000C0000 |
-#define ADDRMETH_R 0x000D0000 |
-#define ADDRMETH_S 0x000E0000 |
-#define ADDRMETH_T 0x000F0000 |
-#define ADDRMETH_V 0x00100000 |
-#define ADDRMETH_W 0x00110000 |
-#define ADDRMETH_X 0x00120000 |
-#define ADDRMETH_Y 0x00130000 |
-#define ADDRMETH_RR 0x00140000 /* gen reg hard-coded in opcode */ |
-#define ADDRMETH_RS 0x00150000 /* seg reg hard-coded in opcode */ |
-#define ADDRMETH_RT 0x00160000 /* test reg hard-coded in opcode */ |
-#define ADDRMETH_RF 0x00170000 /* fpu reg hard-coded in opcode */ |
-#define ADDRMETH_II 0x00180000 /* immediate hard-coded in opcode */ |
-#define ADDRMETH_PP 0x00190000 /* mm reg ONLY in modr/m field */ |
-#define ADDRMETH_VV 0x001A0000 /* xmm reg ONLY in mod/rm field */ |
- |
-/* Operand Types, per intel manual */ |
-#define OPTYPE_MASK 0xFF000000 |
- |
-#define OPTYPE_a 0x01000000 /* BOUND: h:h or w:w */ |
-#define OPTYPE_b 0x02000000 /* byte */ |
-#define OPTYPE_c 0x03000000 /* byte or word */ |
-#define OPTYPE_d 0x04000000 /* word */ |
-#define OPTYPE_dq 0x05000000 /* qword */ |
-#define OPTYPE_p 0x06000000 /* 16:16 or 16:32 pointer */ |
-#define OPTYPE_pi 0x07000000 /* dword MMX reg */ |
-#define OPTYPE_ps 0x08000000 /* 128-bit single fp */ |
-#define OPTYPE_q 0x09000000 /* dword */ |
-#define OPTYPE_s 0x0A000000 /* 6-byte descriptor */ |
-#define OPTYPE_ss 0x0B000000 /* scalar of 128-bit single fp */ |
-#define OPTYPE_si 0x0C000000 /* word general register */ |
-#define OPTYPE_v 0x0D000000 /* hword or word */ |
-#define OPTYPE_w 0x0E000000 /* hword */ |
-#define OPTYPE_m 0x0F000000 /* to handle LEA */ |
-#define OPTYPE_none 0xFF000000 /* no valid operand size, INVLPG */ |
- |
-/* custom ones for FPU instructions */ |
-#define OPTYPE_fs 0x10000000 /* pointer to single-real*/ |
-#define OPTYPE_fd 0x20000000 /* pointer to double real */ |
-#define OPTYPE_fe 0x30000000 /* pointer to extended real */ |
-#define OPTYPE_fb 0x40000000 /* pointer to packed BCD */ |
-#define OPTYPE_fv 0x50000000 /* pointer to FPU env: 14|28-bytes */ |
-#define OPTYPE_ft 0x60000000 /* pointer to FPU state: 94|108-bytes */ |
-#define OPTYPE_fx 0x70000000 /* pointer to FPU regs: 512 bites */ |
-#define OPTYPE_fp 0x80000000 /* general fpu register: dbl ext */ |
- |
-/* SSE2 operand types */ |
-#define OPTYPE_sd 0x90000000 /* scalar of 128-bit double fp */ |
-#define OPTYPE_pd 0xA0000000 /* 128-bit double fp */ |
- |
- |
- |
-/* ---------------------------------------------- Opcode Table Descriptions */ |
-/* the table type describes how to handle byte/size increments before |
- * and after lookup. Some tables re-use the current byte, others |
- * consume a byte only if the ModR/M encodes no operands, etc */ |
-enum ia32_tbl_type_id { |
- tbl_opcode = 0, /* standard opcode table: no surprises */ |
- tbl_prefix, /* Prefix Override, e.g. 66/F2/F3 */ |
- tbl_suffix, /* 3D Now style */ |
- tbl_extension, /* ModR/M extension: 00-FF -> 00-07 */ |
- tbl_ext_ext, /* extension of modr/m using R/M field */ |
- tbl_fpu, /* fpu table: 00-BF -> 00-0F */ |
- tbl_fpu_ext /* fpu extension : C0-FF -> 00-1F */ |
- }; |
- |
-/* How it works: |
- * Bytes are 'consumed' if the next table lookup requires that the byte |
- * pointer be advanced in the instruction stream. 'Does not consume' means |
- * that, when the lookup function recurses, the same byte it re-used in the |
- * new table. It also means that size is not decremented, for example when |
- * a ModR/M byte is used. Note that tbl_extension (ModR/M) instructions that |
- * do not increase the size of an insn with their operands have a forced |
- 3 size increase in the lookup algo. Weird, yes, confusing, yes, welcome |
- * to the Intel ISA. Another note: tbl_prefix is used as an override, so an |
- * empty insn in a prefix table causes the instruction in the original table |
- * to be used, rather than an invalid insn being generated. |
- * tbl_opcode uses current byte and consumes it |
- * tbl_prefix uses current byte but does not consume it |
- * tbl_suffix uses and consumes last byte in insn |
- * tbl_extension uses current byte but does not consume it |
- * tbl_ext_ext uses current byte but does not consume it |
- * tbl_fpu uses current byte and consumes it |
- * tbl_fpu_ext uses current byte but does not consume it |
- */ |
- |
-/* Convenience struct for opcode tables : these will be stored in a |
- * 'table of tables' so we can use a table index instead of a pointer */ |
-typedef struct { /* Assembly instruction tables */ |
- ia32_insn_t *table; /* Pointer to table of instruction encodings */ |
- enum ia32_tbl_type_id type; |
- unsigned char shift; /* amount to shift modrm byte */ |
- unsigned char mask; /* bit mask for look up */ |
- unsigned char minlim,maxlim; /* limits on min/max entries. */ |
-} ia32_table_desc_t; |
- |
- |
-/* ---------------------------------------------- 'Cooked' Operand Type Info */ |
-/* Permissions: */ |
-#define OP_R 0x001 /* operand is READ */ |
-#define OP_W 0x002 /* operand is WRITTEN */ |
-#define OP_RW 0x003 /* (OP_R|OP_W): convenience macro */ |
-#define OP_X 0x004 /* operand is EXECUTED */ |
- |
-#define OP_PERM_MASK 0x0000007 /* perms are NOT mutually exclusive */ |
-#define OP_PERM( type ) (type & OP_PERM_MASK) |
- |
-/* Flags */ |
-#define OP_SIGNED 0x010 /* operand is signed */ |
- |
-#define OP_FLAG_MASK 0x0F0 /* mods are NOT mutually exclusive */ |
-#define OP_FLAGS( type ) (type & OP_FLAG_MASK) |
- |
-#define OP_REG_MASK 0x0000FFFF /* lower WORD is register ID */ |
-#define OP_REGTBL_MASK 0xFFFF0000 /* higher word is register type [gen/dbg] */ |
-#define OP_REGID( type ) (type & OP_REG_MASK) |
-#define OP_REGTYPE( type ) (type & OP_REGTBL_MASK) |
- |
-/* ------------------------------------------'Cooked' Instruction Type Info */ |
-/* high-bit opcode types/insn meta-types */ |
-#define INS_FLAG_PREFIX 0x10000000 /* insn is a prefix */ |
-#define INS_FLAG_SUFFIX 0x20000000 /* followed by a suffix byte */ |
-#define INS_FLAG_MASK 0xFF000000 |
- |
-/* insn notes */ |
-#define INS_NOTE_RING0 0x00000001 /* insn is privileged */ |
-#define INS_NOTE_SMM 0x00000002 /* Sys Mgt Mode only */ |
-#define INS_NOTE_SERIAL 0x00000004 /* serializes */ |
-#define INS_NOTE_NONSWAP 0x00000008 /* insn is not swapped in att format */ // could be separate field? |
-#define INS_NOTE_NOSUFFIX 0x00000010 /* insn has no size suffix in att format */ // could be separate field? |
-//#define INS_NOTE_NMI |
- |
-#define INS_INVALID 0 |
- |
-/* instruction groups */ |
-#define INS_EXEC 0x1000 |
-#define INS_ARITH 0x2000 |
-#define INS_LOGIC 0x3000 |
-#define INS_STACK 0x4000 |
-#define INS_COND 0x5000 |
-#define INS_LOAD 0x6000 |
-#define INS_ARRAY 0x7000 |
-#define INS_BIT 0x8000 |
-#define INS_FLAG 0x9000 |
-#define INS_FPU 0xA000 |
-#define INS_TRAPS 0xD000 |
-#define INS_SYSTEM 0xE000 |
-#define INS_OTHER 0xF000 |
- |
-#define INS_GROUP_MASK 0xF000 |
-#define INS_GROUP( type ) ( type & INS_GROUP_MASK ) |
- |
-/* INS_EXEC group */ |
-#define INS_BRANCH (INS_EXEC | 0x01) /* Unconditional branch */ |
-#define INS_BRANCHCC (INS_EXEC | 0x02) /* Conditional branch */ |
-#define INS_CALL (INS_EXEC | 0x03) /* Jump to subroutine */ |
-#define INS_CALLCC (INS_EXEC | 0x04) /* Jump to subroutine */ |
-#define INS_RET (INS_EXEC | 0x05) /* Return from subroutine */ |
- |
-/* INS_ARITH group */ |
-#define INS_ADD (INS_ARITH | 0x01) |
-#define INS_SUB (INS_ARITH | 0x02) |
-#define INS_MUL (INS_ARITH | 0x03) |
-#define INS_DIV (INS_ARITH | 0x04) |
-#define INS_INC (INS_ARITH | 0x05) /* increment */ |
-#define INS_DEC (INS_ARITH | 0x06) /* decrement */ |
-#define INS_SHL (INS_ARITH | 0x07) /* shift right */ |
-#define INS_SHR (INS_ARITH | 0x08) /* shift left */ |
-#define INS_ROL (INS_ARITH | 0x09) /* rotate left */ |
-#define INS_ROR (INS_ARITH | 0x0A) /* rotate right */ |
-#define INS_MIN (INS_ARITH | 0x0B) /* min func */ |
-#define INS_MAX (INS_ARITH | 0x0C) /* max func */ |
-#define INS_AVG (INS_ARITH | 0x0D) /* avg func */ |
-#define INS_FLR (INS_ARITH | 0x0E) /* floor func */ |
-#define INS_CEIL (INS_ARITH | 0x0F) /* ceiling func */ |
- |
-/* INS_LOGIC group */ |
-#define INS_AND (INS_LOGIC | 0x01) |
-#define INS_OR (INS_LOGIC | 0x02) |
-#define INS_XOR (INS_LOGIC | 0x03) |
-#define INS_NOT (INS_LOGIC | 0x04) |
-#define INS_NEG (INS_LOGIC | 0x05) |
-#define INS_NAND (INS_LOGIC | 0x06) |
- |
-/* INS_STACK group */ |
-#define INS_PUSH (INS_STACK | 0x01) |
-#define INS_POP (INS_STACK | 0x02) |
-#define INS_PUSHREGS (INS_STACK | 0x03) /* push register context */ |
-#define INS_POPREGS (INS_STACK | 0x04) /* pop register context */ |
-#define INS_PUSHFLAGS (INS_STACK | 0x05) /* push all flags */ |
-#define INS_POPFLAGS (INS_STACK | 0x06) /* pop all flags */ |
-#define INS_ENTER (INS_STACK | 0x07) /* enter stack frame */ |
-#define INS_LEAVE (INS_STACK | 0x08) /* leave stack frame */ |
- |
-/* INS_COND group */ |
-#define INS_TEST (INS_COND | 0x01) |
-#define INS_CMP (INS_COND | 0x02) |
- |
-/* INS_LOAD group */ |
-#define INS_MOV (INS_LOAD | 0x01) |
-#define INS_MOVCC (INS_LOAD | 0x02) |
-#define INS_XCHG (INS_LOAD | 0x03) |
-#define INS_XCHGCC (INS_LOAD | 0x04) |
-#define INS_CONV (INS_LOAD | 0x05) /* move and convert type */ |
- |
-/* INS_ARRAY group */ |
-#define INS_STRCMP (INS_ARRAY | 0x01) |
-#define INS_STRLOAD (INS_ARRAY | 0x02) |
-#define INS_STRMOV (INS_ARRAY | 0x03) |
-#define INS_STRSTOR (INS_ARRAY | 0x04) |
-#define INS_XLAT (INS_ARRAY | 0x05) |
- |
-/* INS_BIT group */ |
-#define INS_BITTEST (INS_BIT | 0x01) |
-#define INS_BITSET (INS_BIT | 0x02) |
-#define INS_BITCLR (INS_BIT | 0x03) |
- |
-/* INS_FLAG group */ |
-#define INS_CLEARCF (INS_FLAG | 0x01) /* clear Carry flag */ |
-#define INS_CLEARZF (INS_FLAG | 0x02) /* clear Zero flag */ |
-#define INS_CLEAROF (INS_FLAG | 0x03) /* clear Overflow flag */ |
-#define INS_CLEARDF (INS_FLAG | 0x04) /* clear Direction flag */ |
-#define INS_CLEARSF (INS_FLAG | 0x05) /* clear Sign flag */ |
-#define INS_CLEARPF (INS_FLAG | 0x06) /* clear Parity flag */ |
-#define INS_SETCF (INS_FLAG | 0x07) |
-#define INS_SETZF (INS_FLAG | 0x08) |
-#define INS_SETOF (INS_FLAG | 0x09) |
-#define INS_SETDF (INS_FLAG | 0x0A) |
-#define INS_SETSF (INS_FLAG | 0x0B) |
-#define INS_SETPF (INS_FLAG | 0x0C) |
-#define INS_TOGCF (INS_FLAG | 0x10) /* toggle */ |
-#define INS_TOGZF (INS_FLAG | 0x20) |
-#define INS_TOGOF (INS_FLAG | 0x30) |
-#define INS_TOGDF (INS_FLAG | 0x40) |
-#define INS_TOGSF (INS_FLAG | 0x50) |
-#define INS_TOGPF (INS_FLAG | 0x60) |
- |
-/* INS_FPU */ |
-#define INS_FMOV (INS_FPU | 0x1) |
-#define INS_FMOVCC (INS_FPU | 0x2) |
-#define INS_FNEG (INS_FPU | 0x3) |
-#define INS_FABS (INS_FPU | 0x4) |
-#define INS_FADD (INS_FPU | 0x5) |
-#define INS_FSUB (INS_FPU | 0x6) |
-#define INS_FMUL (INS_FPU | 0x7) |
-#define INS_FDIV (INS_FPU | 0x8) |
-#define INS_FSQRT (INS_FPU | 0x9) |
-#define INS_FCMP (INS_FPU | 0xA) |
-#define INS_FCOS (INS_FPU | 0xC) /* cosine */ |
-#define INS_FLDPI (INS_FPU | 0xD) /* load pi */ |
-#define INS_FLDZ (INS_FPU | 0xE) /* load 0 */ |
-#define INS_FTAN (INS_FPU | 0xF) /* tanget */ |
-#define INS_FSINE (INS_FPU | 0x10) /* sine */ |
-#define INS_FSYS (INS_FPU | 0x20) /* misc */ |
- |
-/* INS_TRAP */ |
-#define INS_TRAP (INS_TRAPS | 0x01) /* generate trap */ |
-#define INS_TRAPCC (INS_TRAPS | 0x02) /* conditional trap gen */ |
-#define INS_TRET (INS_TRAPS | 0x03) /* return from trap */ |
-#define INS_BOUNDS (INS_TRAPS | 0x04) /* gen bounds trap */ |
-#define INS_DEBUG (INS_TRAPS | 0x05) /* gen breakpoint trap */ |
-#define INS_TRACE (INS_TRAPS | 0x06) /* gen single step trap */ |
-#define INS_INVALIDOP (INS_TRAPS | 0x07) /* gen invalid insn */ |
-#define INS_OFLOW (INS_TRAPS | 0x08) /* gen overflow trap */ |
-#define INS_ICEBP (INS_TRAPS | 0x09) /* ICE breakpoint */ |
- |
-/* INS_SYSTEM */ |
-#define INS_HALT (INS_SYSTEM | 0x01) /* halt machine */ |
-#define INS_IN (INS_SYSTEM | 0x02) /* input form port */ |
-#define INS_OUT (INS_SYSTEM | 0x03) /* output to port */ |
-#define INS_CPUID (INS_SYSTEM | 0x04) /* identify cpu */ |
- |
-/* INS_OTHER */ |
-#define INS_NOP (INS_OTHER | 0x01) |
-#define INS_BCDCONV (INS_OTHER | 0x02) /* convert to/from BCD */ |
-#define INS_SZCONV (INS_OTHER | 0x03) /* convert size of operand */ |
-#define INS_SALC (INS_OTHER | 0x04) /* set %al on carry */ |
-#define INS_UNKNOWN (INS_OTHER | 0x05) |
- |
- |
-#define INS_TYPE_MASK 0xFFFF |
-#define INS_TYPE( type ) ( type & INS_TYPE_MASK ) |
- |
- /* flags effected by instruction */ |
-#define INS_TEST_CARRY 0x01 /* carry */ |
-#define INS_TEST_ZERO 0x02 /* zero/equal */ |
-#define INS_TEST_OFLOW 0x04 /* overflow */ |
-#define INS_TEST_DIR 0x08 /* direction */ |
-#define INS_TEST_SIGN 0x10 /* negative */ |
-#define INS_TEST_PARITY 0x20 /* parity */ |
-#define INS_TEST_OR 0x40 /* used in jle */ |
-#define INS_TEST_NCARRY 0x100 /* ! carry */ |
-#define INS_TEST_NZERO 0x200 /* ! zero */ |
-#define INS_TEST_NOFLOW 0x400 /* ! oflow */ |
-#define INS_TEST_NDIR 0x800 /* ! dir */ |
-#define INS_TEST_NSIGN 0x100 /* ! sign */ |
-#define INS_TEST_NPARITY 0x2000 /* ! parity */ |
-/* SF == OF */ |
-#define INS_TEST_SFEQOF 0x4000 |
-/* SF != OF */ |
-#define INS_TEST_SFNEOF 0x8000 |
- |
-#define INS_TEST_ALL INS_TEST_CARRY | INS_TEST_ZERO | \ |
- INS_TEST_OFLOW | INS_TEST_SIGN | \ |
- INS_TEST_PARITY |
- |
-#define INS_SET_CARRY 0x010000 /* carry */ |
-#define INS_SET_ZERO 0x020000 /* zero/equal */ |
-#define INS_SET_OFLOW 0x040000 /* overflow */ |
-#define INS_SET_DIR 0x080000 /* direction */ |
-#define INS_SET_SIGN 0x100000 /* negative */ |
-#define INS_SET_PARITY 0x200000 /* parity */ |
-#define INS_SET_NCARRY 0x1000000 |
-#define INS_SET_NZERO 0x2000000 |
-#define INS_SET_NOFLOW 0x4000000 |
-#define INS_SET_NDIR 0x8000000 |
-#define INS_SET_NSIGN 0x10000000 |
-#define INS_SET_NPARITY 0x20000000 |
-#define INS_SET_SFEQOF 0x40000000 |
-#define INS_SET_SFNEOF 0x80000000 |
- |
-#define INS_SET_ALL INS_SET_CARRY | INS_SET_ZERO | \ |
- INS_SET_OFLOW | INS_SET_SIGN | \ |
- INS_SET_PARITY |
- |
-#define INS_TEST_MASK 0x0000FFFF |
-#define INS_FLAGS_TEST(x) (x & INS_TEST_MASK) |
-#define INS_SET_MASK 0xFFFF0000 |
-#define INS_FLAGS_SET(x) (x & INS_SET_MASK) |
- |
-#if 0 |
-/* TODO: actually start using these */ |
-#define X86_PAIR_NP 1 /* not pairable; execs in U */ |
-#define X86_PAIR_PU 2 /* pairable in U pipe */ |
-#define X86_PAIR_PV 3 /* pairable in V pipe */ |
-#define X86_PAIR_UV 4 /* pairable in UV pipe */ |
-#define X86_PAIR_FX 5 /* pairable with FXCH */ |
- |
-#define X86_EXEC_PORT_0 1 |
-#define X86_EXEC_PORT_1 2 |
-#define X86_EXEC_PORT_2 4 |
-#define X86_EXEC_PORT_3 8 |
-#define X86_EXEC_PORT_4 16 |
- |
-#define X86_EXEC_UNITS |
- |
-typedef struct { /* representation of an insn during decoding */ |
- uint32_t flags; /* runtime settings */ |
- /* instruction prefixes and other foolishness */ |
- uint32_t prefix; /* encoding of prefix */ |
- char prefix_str[16]; /* mnemonics for prefix */ |
- uint32_t branch_hint; /* gah! */ |
- unsigned int cpu_ver; /* TODO: cpu version */ |
- unsigned int clocks; /* TODO: clock cycles: min/max */ |
- unsigned char last_prefix; |
- /* runtime intruction decoding helpers */ |
- unsigned char mode; /* 16, 32, 64 */ |
- unsigned char gen_regs; /* offset of default general reg set */ |
- unsigned char sz_operand; /* operand size for insn */ |
- unsigned char sz_address; /* address size for insn */ |
- unsigned char uops; /* uops per insn */ |
- unsigned char pairing; /* np,pu,pv.lv */ |
- unsigned char exec_unit; |
- unsigned char exec_port; |
- unsigned char latency; |
-} ia32_info_t; |
-#define MODE_32 0 /* default */ |
-#define MODE_16 1 |
-#define MODE_64 2 |
-#endif |
- |
-#endif |