Create QuicTransportChannel

webrtc/p2p/quic/quictransportchannel.cc

Index: webrtc/p2p/quic/quictransportchannel.cc
diff --git a/webrtc/p2p/quic/quictransportchannel.cc b/webrtc/p2p/quic/quictransportchannel.cc
new file mode 100644
index 0000000000000000000000000000000000000000..f1b1ee95f71bc850d896c0b87442339d23181eef
--- /dev/null
+++ b/webrtc/p2p/quic/quictransportchannel.cc
@@ -0,0 +1,607 @@
+/*
+ *  Copyright 2016 The WebRTC Project Authors. All rights reserved.
+ *
+ *  Use of this source code is governed by a BSD-style license
+ *  that can be found in the LICENSE file in the root of the source
+ *  tree. An additional intellectual property rights grant can be found
+ *  in the file PATENTS.  All contributing project authors may
+ *  be found in the AUTHORS file in the root of the source tree.
+ */
+
+#include "webrtc/p2p/quic/quictransportchannel.h"
+
+#include <utility>
+
+#include "net/quic/crypto/proof_source.h"
+#include "net/quic/crypto/proof_verifier.h"
+#include "net/quic/crypto/quic_crypto_client_config.h"
+#include "net/quic/crypto/quic_crypto_server_config.h"
+#include "net/quic/quic_connection.h"
+#include "net/quic/quic_crypto_client_stream.h"
+#include "net/quic/quic_crypto_server_stream.h"
+#include "net/quic/quic_protocol.h"
+#include "webrtc/base/checks.h"
+#include "webrtc/base/helpers.h"
+#include "webrtc/base/logging.h"
+#include "webrtc/base/socket.h"
+#include "webrtc/base/thread.h"
+#include "webrtc/p2p/base/common.h"
+
+namespace {
+
+// QUIC public header constants for net::QuicConnection. These are arbitrary
+// given that |channel_| only receives packets specific to this channel,
+// in which case we already know the QUIC packets have the correct destination.
+const net::QuicConnectionId kConnectionId = 0;
+const net::IPAddressNumber kConnectionIpAddress(net::kIPv4AddressSize, 0);
+const net::IPEndPoint kConnectionIpEndpoint(kConnectionIpAddress, 0);
+
+// Arbitrary server port number for net::QuicCryptoClientConfig.
+const int kQuicServerPort = 0;
+
+// QUIC connection timeout in seconds. This is large so that |channel_| can
+// be responsible for connection timeout.
+const int kIdleConnectionStateLifetime = 1000;

[pthatcher1, 2016/02/25 08:24:25]

Is this in ms?  If so, I don't think 1000 is long enough.  With ICE, you could
see 10-15 seconds of a disconnected state and then come back.

[mikescarlett, 2016/02/26 00:54:13]

Seconds. This is roughly 16.7 minutes.

[pthatcher1, 2016/02/27 01:14:19]

Ah... that's long enough :).

But can you put a comment?

... = 1000;  // seconds

[mikescarlett, 2016/03/01 00:02:10]

Done.

+
+// Length of HKDF input keying material, equal to its number of bytes.
+const size_t kInputKeyingMaterialLength = 32;

[pthatcher1, 2016/02/25 08:24:25]

Where does this come from?

[mikescarlett, 2016/02/26 00:54:14]

I added the link where HKDF input keying material is described:
https://tools.ietf.org/html/rfc5869#section-2.2.

I made up this value because they only specify that input keying material is for
generating a pseudorandom key, but not how random it needs to be.

+
+// We don't pull the RTP constants from rtputils.h, to avoid a layer violation.
+const size_t kMinRtpPacketLen = 12;
+
+bool IsRtpPacket(const char* data, size_t len) {
+  const uint8_t* u = reinterpret_cast<const uint8_t*>(data);
+  return (len >= kMinRtpPacketLen && (u[0] & 0xC0) == 0x80);
+}
+
+// Function for detecting QUIC packets based off
+// https://tools.ietf.org/html/draft-tsvwg-quic-protocol-02#section-6.
+const size_t kMinQuicPacketLen = 2;
+
+bool IsQuicPacket(const char* data, size_t len) {
+  const uint8_t* u = reinterpret_cast<const uint8_t*>(data);
+  return (len >= kMinQuicPacketLen && (u[0] & 0x80) == 0);
+}
+
+// Used by QuicCryptoServerConfig to provide dummy proof credentials.
+// TODO(mikescarlett): Remove when secure P2P QUIC handshake is possible.
+class InsecureProofSource : public net::ProofSource {

[pthatcher1, 2016/02/25 08:24:24]

Might as well call this DummyProofSource

[mikescarlett, 2016/02/26 00:54:13]

Done.

+ public:
+  InsecureProofSource() {}
+  ~InsecureProofSource() override {}
+
+  // ProofSource override.
+  bool GetProof(const net::IPAddressNumber& server_ip,
+                const std::string& hostname,
+                const std::string& server_config,
+                bool ecdsa_ok,
+                const std::vector<std::string>** out_certs,
+                std::string* out_signature,
+                std::string* out_leaf_cert_sct) override {
+    LOG(LS_INFO) << "GetProof() providing dummy credentials for insecure QUIC";
+    std::vector<std::string>* certs = new std::vector<std::string>();
+    certs->push_back("Required to establish handshake");

[pthatcher1, 2016/02/25 08:24:24]

And say "Dummy cert"

[mikescarlett, 2016/02/26 00:54:14]

Done.

+    std::string signature("Signature");

[pthatcher1, 2016/02/25 08:24:25]

And "Dummy signature"

[mikescarlett, 2016/02/26 00:54:13]

Done.

+
+    *out_certs = certs;
+    *out_signature = signature;
+
+    return true;
+  }
+};
+
+// Used by QuicCryptoClientConfig to ignore the peer's credentials
+// and establish an insecure QUIC connection.
+// TODO(mikescarlett): Remove when secure P2P QUIC handshake is possible.
+class InsecureProofVerifier : public net::ProofVerifier {
+ public:
+  InsecureProofVerifier() {}
+  ~InsecureProofVerifier() override {}
+
+  // ProofVerifier override.
+  net::QuicAsyncStatus VerifyProof(
+      const std::string& hostname,
+      const std::string& server_config,
+      const std::vector<std::string>& certs,
+      const std::string& cert_sct,
+      const std::string& signature,
+      const net::ProofVerifyContext* verify_context,
+      std::string* error_details,
+      scoped_ptr<net::ProofVerifyDetails>* verify_details,
+      net::ProofVerifierCallback* callback) override {
+    LOG(LS_INFO) << "VerifyProof() ignoring credentials and returning success";
+    return net::QUIC_SUCCESS;
+  }
+};
+
+}  // namespace
+
+namespace cricket {
+
+QuicTransportChannel::QuicTransportChannel(TransportChannelImpl* channel)
+    : TransportChannelImpl(channel->transport_name(), channel->component()),
+      worker_thread_(rtc::Thread::Current()),
+      channel_(channel),
+      helper_(worker_thread_),
+      ssl_role_(rtc::SSL_CLIENT) {
+  channel_->SignalWritableState.connect(this,
+                                        &QuicTransportChannel::OnWritableState);
+  channel_->SignalReadPacket.connect(this, &QuicTransportChannel::OnReadPacket);
+  channel_->SignalSentPacket.connect(this, &QuicTransportChannel::OnSentPacket);
+  channel_->SignalReadyToSend.connect(this,
+                                      &QuicTransportChannel::OnReadyToSend);
+  channel_->SignalGatheringState.connect(
+      this, &QuicTransportChannel::OnGatheringState);
+  channel_->SignalCandidateGathered.connect(
+      this, &QuicTransportChannel::OnCandidateGathered);
+  channel_->SignalRoleConflict.connect(this,
+                                       &QuicTransportChannel::OnRoleConflict);
+  channel_->SignalRouteChange.connect(this,
+                                      &QuicTransportChannel::OnRouteChange);
+  channel_->SignalConnectionRemoved.connect(
+      this, &QuicTransportChannel::OnConnectionRemoved);
+  channel_->SignalReceivingState.connect(
+      this, &QuicTransportChannel::OnReceivingState);
+
+  config_.SetIdleConnectionStateLifetime(
+      net::QuicTime::Delta::FromSeconds(kIdleConnectionStateLifetime),
+      net::QuicTime::Delta::FromSeconds(kIdleConnectionStateLifetime));
+  config_.SetBytesForConnectionIdToSend(0);

[pthatcher1, 2016/02/25 08:24:24]

What's this?

[mikescarlett, 2016/02/26 00:54:14]

Added a comment. This should set the bytes reserved for the QUIC connection ID
to zero, which is done since connection IDs are ignored.

+}
+
+QuicTransportChannel::~QuicTransportChannel() {}
+
+void QuicTransportChannel::Connect() {
+  // We should only get a single call to Connect.
+  ASSERT(quic_state() == QUIC_TRANSPORT_NEW);
+  channel_->Connect();
+}
+
+bool QuicTransportChannel::SetLocalCertificate(
+    const rtc::scoped_refptr<rtc::RTCCertificate>& certificate) {
+  if (quic_active_) {
+    if (certificate == local_certificate_) {
+      // This may happen during renegotiation.
+      LOG_J(LS_INFO, this) << "Ignoring identical certificate";

[pthatcher1, 2016/02/25 08:24:24]

Just use INFO (like you do ERROR) with no "LS_".

[mikescarlett, 2016/02/26 00:54:13]

Done.

+      return true;
+    } else {
+      LOG_J(ERROR, this) << "Can't change local certificate in this state";

[pthatcher1, 2016/02/25 08:24:24]

This could be a little more details, perhaps something like "Can't change the
local certificate of a QUIC connection once it's active."

[mikescarlett, 2016/02/26 00:54:14]

Done.

+      return false;
+    }
+  }
+  if (certificate) {
+    local_certificate_ = certificate;
+    quic_active_ = true;
+  } else {
+    LOG_J(LS_INFO, this) << "NULL identity supplied. Not doing QUIC.";

[pthatcher1, 2016/02/25 08:24:25]

Should this be WARN instead of INFO?

And should it return false?

[mikescarlett, 2016/02/26 00:54:13]

Yes it should. I think ERROR seems more appropriate assuming a local certificate
is required for QUIC.

+  }
+  return true;

[pthatcher1, 2016/02/25 08:24:25]

The whole method could be rearranged a bit to be more early-return-friendly:

if (!certificate) {
  LOG ...
  return false;
}
if (!local_certificate_) {
  local_certificate_ = certificate;
  return true;
}
if (local_certificate_ == certificate) {
  LOG ...
  return true;
}
LOG ...
return false;

[mikescarlett, 2016/02/26 00:54:13]

Done.

+}
+
+rtc::scoped_refptr<rtc::RTCCertificate>
+QuicTransportChannel::GetLocalCertificate() const {
+  return local_certificate_;
+}
+
+bool QuicTransportChannel::SetSslRole(rtc::SSLRole role) {
+  if (quic_state() == QUIC_TRANSPORT_CONNECTED) {
+    if (ssl_role_ != role) {
+      LOG_J(LS_ERROR, this)
+          << "SSL Role can't be reversed after the session is setup.";
+      return false;
+    }
+    return true;
+  }
+  ssl_role_ = role;
+  set_ssl_role_ = true;
+  return true;

[pthatcher1, 2016/02/25 08:24:24]

Same here with the early returns:


if (ssl_role_ == role) {
  LOG ...;
  return true;
}
if (quic_state() != QUIC_TRANSPORT_CONNECTED) {
  ssl_role_ = role;
  return true;
}
LOG ...;
return false;

[mikescarlett, 2016/02/26 00:54:13]

Done.

+}
+
+bool QuicTransportChannel::GetSslRole(rtc::SSLRole* role) const {
+  *role = ssl_role_;
+  return true;
+}
+
+bool QuicTransportChannel::SetRemoteFingerprint(const std::string& digest_alg,
+                                                const uint8_t* digest,
+                                                size_t digest_len) {
+  std::string remote_fingerprint_value(reinterpret_cast<const char*>(digest),
+                                       digest_len);
+
+  // Once we have the local certificate, the same remote fingerprint can be set
+  // multiple times.
+  if (quic_active_ && remote_fingerprint_value_ == remote_fingerprint_value &&
+      !digest_alg.empty()) {

[pthatcher1, 2016/02/25 08:24:24]

Wouldn't we ignore an identical remote_fingerprint_value even if !quic_active_?

And don't we have to check that the algorithms are equal?

[mikescarlett, 2016/02/26 00:54:14]

Yes. Fixed now.

+    // This may happen during renegotiation.
+    LOG_J(LS_INFO, this) << "Ignoring identical remote fingerprint";
+    return true;
+  }
+
+  // If the other side doesn't support digest algorithm, turn off
+  // |quic_active_|.
+  if (digest_alg.empty()) {
+    RTC_DCHECK(!digest_len);
+    LOG_J(LS_INFO, this) << "Other side didn't support digest algorithm.";
+    quic_active_ = false;
+    return true;
+  }

[pthatcher1, 2016/02/25 08:24:25]

I think it would make sense to make this one first.

[mikescarlett, 2016/02/26 00:54:13]

Done. Also I think this should log an error and return false now.

+
+  // At this point we know we are doing QUIC
+  remote_fingerprint_value_ = std::move(remote_fingerprint_value);
+  remote_fingerprint_algorithm_ = digest_alg;
+  set_remote_fingerprint_ = true;
+
+  return true;
+}
+
+bool QuicTransportChannel::ExportKeyingMaterial(const std::string& label,
+                                                const uint8_t* context,
+                                                size_t context_len,
+                                                bool use_context,
+                                                uint8_t* result,
+                                                size_t result_len) {
+  std::string quic_context(reinterpret_cast<const char*>(context), context_len);
+  std::string quic_result;
+  if (!quic_->ExportKeyingMaterial(label, quic_context, result_len,
+                                   &quic_result)) {
+    return false;
+  }
+  quic_result.copy(reinterpret_cast<char*>(result), result_len);
+  return true;
+}
+
+bool QuicTransportChannel::GetSrtpCryptoSuite(int* cipher) {
+  *cipher = rtc::SRTP_AES128_CM_SHA1_80;
+  return true;
+}
+
+// Called from upper layers to send a media packet.
+int QuicTransportChannel::SendPacket(const char* data,
+                                     size_t size,
+                                     const rtc::PacketOptions& options,
+                                     int flags) {
+  if (!quic_active_) {
+    // Not doing QUIC.
+    return channel_->SendPacket(data, size, options);

[pthatcher1, 2016/02/25 08:24:25]

I think we can remove this.

[mikescarlett, 2016/02/26 00:54:13]

Done.

+  }
+
+  switch (quic_state()) {
+    case QUIC_TRANSPORT_NEW:
+      // Can't send data until the connection is active.
+      return -1;
+    case QUIC_TRANSPORT_CONNECTING:
+      // Can't send data until the connection is active.
+      return -1;

[pthatcher1, 2016/02/25 08:24:25]

If it's SRTP_BYPASS, we can, can't we?

I think this whole method could just be:

if (flags & PF_SRTP_BYPASS && IsRtpPacket(data, size)) {
  return channel_->SendPacket(data, size, options);
}
LOG(LS_ERROR) << "...";
return -1;

[mikescarlett, 2016/02/26 00:54:14]

Done. That seems reasonable since SRTP is always encrypted.

+    case QUIC_TRANSPORT_CONNECTED:
+      if (flags & PF_SRTP_BYPASS) {
+        if (!IsRtpPacket(data, size)) {
+          return -1;
+        }
+        return channel_->SendPacket(data, size, options);
+      }
+      return -1;
+    case QUIC_TRANSPORT_FAILED:
+      // Can't send anything when we're closed.
+      return -1;
+    default:
+      ASSERT(false);
+      return -1;
+  }
+}
+
+// The state transition logic here is as follows:
+// (1) If we're not doing QUIC, then the state is equivalent to the
+//     state of |channel_|.
+// (2) If we're doing QUIC:
+//     - Prior to the QUIC handshake, the state is neither receiving nor
+//       writable.
+//     - When |channel_| goes writable for the first time we
+//       start the QUIC handshake.
+//     - Once the QUIC handshake completes, the state is that of the
+//       |channel_| again.
+void QuicTransportChannel::OnWritableState(TransportChannel* channel) {
+  ASSERT(rtc::Thread::Current() == worker_thread_);
+  ASSERT(channel == channel_);
+  LOG_J(LS_VERBOSE, this)
+      << "QuicTransportChannel: channel writable state changed to "
+      << channel_->writable();
+
+  if (!quic_active_) {
+    // Not doing QUIC.
+    // Note: SignalWritableState fired by set_writable.
+    set_writable(channel_->writable());

[pthatcher1, 2016/02/25 08:24:25]

I think we can remove this.

[mikescarlett, 2016/02/26 00:54:13]

I removed it. So the QUIC channel is not writable until the handshake is
complete. When the channel first becomes writable it will call MaybeStartQuic().

+    return;
+  }
+
+  switch (quic_state()) {
+    case QUIC_TRANSPORT_NEW:
+      // This should never fail:
+      // Because we are operating in a nonblocking mode and all
+      // incoming packets come in via OnReadPacket(), which rejects
+      // packets in this state, the incoming queue must be empty. We
+      // ignore write errors, thus any errors must be because of
+      // configuration and therefore are our fault.
+      // Note that in non-debug configurations, failure in
+      // MaybeStartQuic() changes the state to QUIC_TRANSPORT_FAILED.
+      VERIFY(MaybeStartQuic());
+      break;
+    case QUIC_TRANSPORT_CONNECTED:
+      // Note: SignalWritableState fired by set_writable.
+      set_writable(channel_->writable());
+      break;
+    case QUIC_TRANSPORT_CONNECTING:
+      // This channel is not writable until QUIC handshake finishes. It might
+      // have been write blocked.
+      if (HasDataToWrite()) {
+        OnCanWrite();
+      }

[pthatcher1, 2016/02/25 08:24:25]

Should we do this for QUIC_TRANSPORT_CONNECTED also?

[mikescarlett, 2016/02/26 00:54:14]

Yes. Fixed this.

+      break;
+    case QUIC_TRANSPORT_FAILED:
+      // Should not happen. Do nothing.
+      break;
+  }
+}
+
+void QuicTransportChannel::OnReceivingState(TransportChannel* channel) {
+  ASSERT(rtc::Thread::Current() == worker_thread_);
+  ASSERT(channel == channel_);
+  LOG_J(LS_VERBOSE, this)
+      << "QuicTransportChannel: channel receiving state changed to "
+      << channel_->receiving();
+  if (!quic_active_ || quic_state() == QUIC_TRANSPORT_CONNECTED) {

[pthatcher1, 2016/02/25 08:24:25]

I think we can remove the !quic_active_ part of this.

[mikescarlett, 2016/02/26 00:54:14]

Done. !quic_active_ would essentially be false since we know we're doing QUIC.

+    // Note: SignalReceivingState fired by set_receiving.
+    set_receiving(channel_->receiving());
+  }
+}
+
+void QuicTransportChannel::OnReadPacket(TransportChannel* channel,
+                                        const char* data,
+                                        size_t size,
+                                        const rtc::PacketTime& packet_time,
+                                        int flags) {
+  ASSERT(rtc::Thread::Current() == worker_thread_);
+  ASSERT(channel == channel_);
+  ASSERT(flags == 0);
+
+  if (!quic_active_) {
+    // Not doing QUIC.
+    SignalReadPacket(this, data, size, packet_time, 0);
+    return;
+  }

[pthatcher1, 2016/02/25 08:24:24]

I think we can remove this.

[mikescarlett, 2016/02/26 00:54:14]

Removed.

+
+  switch (quic_state()) {
+    case QUIC_TRANSPORT_NEW:
+      if (set_remote_fingerprint_) {
+        // This would occur if other peer is ready to start QUIC but this peer
+        // hasn't started QUIC.
+        LOG_J(LS_INFO, this) << "Dropping packet received before QUIC started.";
+      } else {
+        // Currently drop the packet, but we might in future
+        // decide to take this as evidence that the other
+        // side is ready to do QUIC and start the handshake
+        // on our end.
+        LOG_J(LS_WARNING, this) << "Received packet before we know if we are "
+                                << "doing QUIC or not; dropping.";
+      }
+      break;
+    case QUIC_TRANSPORT_CONNECTING:
+    case QUIC_TRANSPORT_CONNECTED:
+      // We should only get QUIC or SRTP packets; STUN's already been demuxed.
+      // Is this potentially a QUIC packet?
+      if (IsQuicPacket(data, size)) {
+        if (!HandleQuicPacket(data, size)) {
+          LOG_J(ERROR, this) << "Failed to handle QUIC packet.";
+          return;
+        }
+      } else {
+        // Not a QUIC packet; our handshake should be complete.
+        if (quic_state() != QUIC_TRANSPORT_CONNECTED) {
+          LOG_J(ERROR, this) << "Received non-QUIC packet before QUIC "
+                             << "complete.";
+          return;
+        }

[pthatcher1, 2016/02/25 08:24:24]

We can probably just pass RTP packet through even if the handshake isn't
complete.

[mikescarlett, 2016/02/26 00:54:13]

True. Removed the extra if statement.

+        // And it had better be a SRTP packet.
+        if (!IsRtpPacket(data, size)) {
+          LOG_J(ERROR, this) << "Received unexpected non-QUIC packet.";

[pthatcher1, 2016/02/25 08:24:24]

non-QUIC, non-RTP packet :).

[mikescarlett, 2016/02/26 00:54:14]

Done.

+          return;
+        }
+        // Signal this upwards as a bypass packet.
+        SignalReadPacket(this, data, size, packet_time, PF_SRTP_BYPASS);
+      }
+      break;
+    case QUIC_TRANSPORT_FAILED:
+      // This shouldn't be happening. Drop the packet.
+      break;
+  }
+}
+
+void QuicTransportChannel::OnSentPacket(TransportChannel* channel,
+                                        const rtc::SentPacket& sent_packet) {
+  ASSERT(rtc::Thread::Current() == worker_thread_);
+  SignalSentPacket(this, sent_packet);
+}
+
+void QuicTransportChannel::OnReadyToSend(TransportChannel* channel) {
+  if (writable()) {
+    SignalReadyToSend(this);
+  }
+}
+
+void QuicTransportChannel::OnGatheringState(TransportChannelImpl* channel) {
+  ASSERT(channel == channel_);
+  SignalGatheringState(this);
+}
+
+void QuicTransportChannel::OnCandidateGathered(TransportChannelImpl* channel,
+                                               const Candidate& c) {
+  ASSERT(channel == channel_);
+  SignalCandidateGathered(this, c);
+}
+
+void QuicTransportChannel::OnRoleConflict(TransportChannelImpl* channel) {
+  ASSERT(channel == channel_);
+  SignalRoleConflict(this);
+}
+
+void QuicTransportChannel::OnRouteChange(TransportChannel* channel,
+                                         const Candidate& candidate) {
+  ASSERT(channel == channel_);
+  SignalRouteChange(this, candidate);
+}
+
+void QuicTransportChannel::OnConnectionRemoved(TransportChannelImpl* channel) {
+  ASSERT(channel == channel_);
+  SignalConnectionRemoved(this);
+}
+
+bool QuicTransportChannel::MaybeStartQuic() {
+  if (!channel_->writable()) {

[pthatcher1, 2016/02/25 08:24:25]

That seems a bit drastic.  Just because we're not writable now doesn't mean we
won't be in the future.  I don't think we need to jump to a terminal state
because of that.

[mikescarlett, 2016/02/26 00:54:13]

Seems fine.

+    LOG_J(ERROR, this) << "Couldn't start QUIC handshake";
+    set_quic_state(QUIC_TRANSPORT_FAILED);
+    return false;
+  }
+  if (!CreateQuicSession() || !StartQuicHandshake()) {

[pthatcher1, 2016/02/25 08:24:25]

This could use a LOG_J(ERROR) or LOG_J(WARN).

[mikescarlett, 2016/02/26 00:54:13]

Done. I agree.

+    return false;
+  }
+  // Verify connection is not closed due to QUIC bug or network failure.
+  // A closed connection should not happen since |channel_| is writable.
+  RTC_DCHECK(quic_->connection()->connected());

[pthatcher1, 2016/02/25 08:24:25]

It seems like it would be a good idea to just log it and return false rather
than crashing in debug builds.

[mikescarlett, 2016/02/26 00:54:14]

Ok I'll do that so QUIC bugs don't crash everything.

+  // Indicate that |quic_| is ready to receive QUIC packets.
+  set_quic_state(QUIC_TRANSPORT_CONNECTING);
+  return true;
+}
+
+bool QuicTransportChannel::CreateQuicSession() {
+  if (!set_ssl_role_) {
+    return false;
+  }
+  net::Perspective perspective = (ssl_role_ == rtc::SSL_CLIENT)
+                                     ? net::Perspective::IS_CLIENT
+                                     : net::Perspective::IS_SERVER;
+  bool owns_writer = false;
+  scoped_ptr<net::QuicConnection> connection(new net::QuicConnection(
+      kConnectionId, kConnectionIpEndpoint, &helper_, this, owns_writer,
+      perspective, net::QuicSupportedVersions()));
+  quic_.reset(new QuicSession(std::move(connection), config_));
+  quic_->SignalHandshakeComplete.connect(
+      this, &QuicTransportChannel::OnHandshakeComplete);
+  quic_->SignalConnectionClosed.connect(
+      this, &QuicTransportChannel::OnConnectionClosed);
+  return true;
+}
+
+bool QuicTransportChannel::StartQuicHandshake() {
+  if (ssl_role_ == rtc::SSL_CLIENT) {
+    // Unique identifier for remote peer.
+    net::QuicServerId server_id(remote_fingerprint_value_, kQuicServerPort);
+    // Performs authentication of remote peer; owned by QuicCryptoClientConfig.
+    // TODO(mikescarlett): Actually verify proof.
+    net::ProofVerifier* proof_verifier = new InsecureProofVerifier();
+    quic_crypto_client_config_.reset(
+        new net::QuicCryptoClientConfig(proof_verifier));
+    net::QuicCryptoClientStream* crypto_stream =
+        new net::QuicCryptoClientStream(server_id, quic_.get(),
+                                        new net::ProofVerifyContext(),
+                                        quic_crypto_client_config_.get(), this);
+    quic_->StartClientHandshake(crypto_stream);
+    LOG_J(LS_INFO, this) << "QuicTransportChannel: Started client handshake.";
+  } else {
+    RTC_DCHECK_EQ(ssl_role_, rtc::SSL_SERVER);
+    // Provides credentials to remote peer; owned by QuicCryptoServerConfig.
+    // TODO(mikescarlett): Actually provide credentials.
+    net::ProofSource* proof_source = new InsecureProofSource();
+    // Input keying material to HKDF, per http://tools.ietf.org/html/rfc5869.
+    // This is pseudorandom so that HKDF-Extract outputs a pseudorandom key,
+    // since QuicCryptoServerConfig does not use a salt value.
+    std::string source_address_token_secret;
+    if (!rtc::CreateRandomString(kInputKeyingMaterialLength,
+                                 &source_address_token_secret)) {
+      LOG_J(ERROR, this) << "Error generating input keying material for HKDF.";
+      return false;
+    }
+    quic_crypto_server_config_.reset(new net::QuicCryptoServerConfig(
+        source_address_token_secret, helper_.GetRandomGenerator(),
+        proof_source));
+    // Provides server with serialized config string to prove ownership.
+    net::QuicCryptoServerConfig::ConfigOptions options;
+    quic_crypto_server_config_->AddDefaultConfig(helper_.GetRandomGenerator(),
+                                                 helper_.GetClock(), options);
+    net::QuicCryptoServerStream* crypto_stream =
+        new net::QuicCryptoServerStream(quic_crypto_server_config_.get(),
+                                        quic_.get());
+    quic_->StartServerHandshake(crypto_stream);
+    LOG_J(LS_INFO, this) << "QuicTransportChannel: Started server handshake.";
+  }
+  return true;
+}
+
+bool QuicTransportChannel::HandleQuicPacket(const char* data, size_t size) {
+  ASSERT(rtc::Thread::Current() == worker_thread_);
+  return quic_->OnReadPacket(data, size);
+}
+
+net::WriteResult QuicTransportChannel::WritePacket(
+    const char* buffer,
+    size_t buf_len,
+    const net::IPAddressNumber& self_address,
+    const net::IPEndPoint& peer_address) {
+  int sent = channel_->SendPacket(buffer, buf_len, rtc::PacketOptions());
+  if (sent <= 0) {
+    int error = GetError();
+    LOG_J(LS_WARNING, this) << "Write failed with socket error " << error;
+    // Since net::WRITE_STATUS_ERROR irreversibly shuts down the QUIC
+    // connection, write status is net::WRITE_STATUS_BLOCKED so that QUIC
+    // packets are queued.
+    return net::WriteResult(net::WRITE_STATUS_BLOCKED, error);

[pthatcher1, 2016/02/25 08:24:24]

There error is only blocking if IsBlockingError(error) is true (see
webrtc/base/socket.h).

However, I'm not sure if we should tear down the whole thing because of a
transient error of any other sort.

Any idea what the QUIC library does when a normal socket gives an error other
than those in IsBlockingError?

[mikescarlett, 2016/02/26 00:54:13]

I believe net::WRITE_STATUS_ERROR was closing the QUIC connection. I will
provide an update regarding this.

[mikescarlett, 2016/02/26 16:52:36]

Strangely the QuicSession gets torn down on net::WRITE_STATUS_ERROR (by calling
QuicConnection::OnError(...)). Everything would have to be reinitialized because
closed connections cannot be reopened.

+  }
+  return net::WriteResult(net::WRITE_STATUS_OK, sent);
+}
+
+// TODO(mikescarlett): |channel_| can be writable but write blocked. Since
+// channel_->GetError() is not updated when there is no error, the only option
+// seems to be writing the packet anyway in this case.
+bool QuicTransportChannel::IsWriteBlocked() const {
+  return !channel_->writable();
+}
+
+void QuicTransportChannel::OnHandshakeComplete() {
+  set_quic_state(QUIC_TRANSPORT_CONNECTED);
+  set_writable(true);
+}
+
+void QuicTransportChannel::OnConnectionClosed(net::QuicErrorCode error,
+                                              bool from_peer) {
+  LOG_J(LS_INFO, this) << "Connection closed by "
+                       << (from_peer ? "other" : "this") << " peer "
+                       << "with QUIC error " << error;
+  set_quic_state(QUIC_TRANSPORT_FAILED);
+  set_writable(false);
+}
+
+void QuicTransportChannel::OnProofValid(
+    const net::QuicCryptoClientConfig::CachedState& cached) {
+  LOG_J(LS_INFO, this) << "Cached proof marked valid";
+}
+
+void QuicTransportChannel::OnProofVerifyDetailsAvailable(
+    const net::ProofVerifyDetails& verify_details) {
+  LOG_J(LS_INFO, this) << "Proof verify details available from"
+                       << " QuicCryptoClientStream";
+}
+
+bool QuicTransportChannel::HasDataToWrite() const {
+  return quic_ && quic_->HasDataToWrite();
+}
+
+void QuicTransportChannel::OnCanWrite() {
+  RTC_DCHECK(quic_ != nullptr);
+  quic_->connection()->OnCanWrite();
+}
+
+void QuicTransportChannel::set_quic_state(QuicTransportState state) {
+  LOG_J(LS_VERBOSE, this) << "set_quic_state from:" << quic_state_ << " to "
+                          << state;
+  quic_state_ = state;
+}
+
+}  // namespace cricket