Remove libjpeg and libjpeg_turbo.

third_party/libjpeg/jdsample.c

Index: third_party/libjpeg/jdsample.c
diff --git a/third_party/libjpeg/jdsample.c b/third_party/libjpeg/jdsample.c
deleted file mode 100644
index 80ffefb2a1ccf5ddc1530b921df0eef6e3e45c18..0000000000000000000000000000000000000000
--- a/third_party/libjpeg/jdsample.c
+++ /dev/null
@@ -1,478 +0,0 @@
-/*
- * jdsample.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains upsampling routines.
- *
- * Upsampling input data is counted in "row groups".  A row group
- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
- * sample rows of each component.  Upsampling will normally produce
- * max_v_samp_factor pixel rows from each row group (but this could vary
- * if the upsampler is applying a scale factor of its own).
- *
- * An excellent reference for image resampling is
- *   Digital Image Warping, George Wolberg, 1990.
- *   Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Pointer to routine to upsample a single component */
-typedef JMETHOD(void, upsample1_ptr,
-		(j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		 JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr));
-
-/* Private subobject */
-
-typedef struct {
-  struct jpeg_upsampler pub;	/* public fields */
-
-  /* Color conversion buffer.  When using separate upsampling and color
-   * conversion steps, this buffer holds one upsampled row group until it
-   * has been color converted and output.
-   * Note: we do not allocate any storage for component(s) which are full-size,
-   * ie do not need rescaling.  The corresponding entry of color_buf[] is
-   * simply set to point to the input data array, thereby avoiding copying.
-   */
-  JSAMPARRAY color_buf[MAX_COMPONENTS];
-
-  /* Per-component upsampling method pointers */
-  upsample1_ptr methods[MAX_COMPONENTS];
-
-  int next_row_out;		/* counts rows emitted from color_buf */
-  JDIMENSION rows_to_go;	/* counts rows remaining in image */
-
-  /* Height of an input row group for each component. */
-  int rowgroup_height[MAX_COMPONENTS];
-
-  /* These arrays save pixel expansion factors so that int_expand need not
-   * recompute them each time.  They are unused for other upsampling methods.
-   */
-  UINT8 h_expand[MAX_COMPONENTS];
-  UINT8 v_expand[MAX_COMPONENTS];
-} my_upsampler;
-
-typedef my_upsampler * my_upsample_ptr;
-
-
-/*
- * Initialize for an upsampling pass.
- */
-
-METHODDEF(void)
-start_pass_upsample (j_decompress_ptr cinfo)
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-
-  /* Mark the conversion buffer empty */
-  upsample->next_row_out = cinfo->max_v_samp_factor;
-  /* Initialize total-height counter for detecting bottom of image */
-  upsample->rows_to_go = cinfo->output_height;
-}
-
-
-/*
- * Control routine to do upsampling (and color conversion).
- *
- * In this version we upsample each component independently.
- * We upsample one row group into the conversion buffer, then apply
- * color conversion a row at a time.
- */
-
-METHODDEF(void)
-sep_upsample (j_decompress_ptr cinfo,
-	      JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr,
-	      JDIMENSION in_row_groups_avail,
-	      JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-	      JDIMENSION out_rows_avail)
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-  int ci;
-  jpeg_component_info * compptr;
-  JDIMENSION num_rows;
-
-  /* Fill the conversion buffer, if it's empty */
-  if (upsample->next_row_out >= cinfo->max_v_samp_factor) {
-    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	 ci++, compptr++) {
-      /* Invoke per-component upsample method.  Notice we pass a POINTER
-       * to color_buf[ci], so that fullsize_upsample can change it.
-       */
-      (*upsample->methods[ci]) (cinfo, compptr,
-	input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]),
-	upsample->color_buf + ci);
-    }
-    upsample->next_row_out = 0;
-  }
-
-  /* Color-convert and emit rows */
-
-  /* How many we have in the buffer: */
-  num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out);
-  /* Not more than the distance to the end of the image.  Need this test
-   * in case the image height is not a multiple of max_v_samp_factor:
-   */
-  if (num_rows > upsample->rows_to_go) 
-    num_rows = upsample->rows_to_go;
-  /* And not more than what the client can accept: */
-  out_rows_avail -= *out_row_ctr;
-  if (num_rows > out_rows_avail)
-    num_rows = out_rows_avail;
-
-  (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf,
-				     (JDIMENSION) upsample->next_row_out,
-				     output_buf + *out_row_ctr,
-				     (int) num_rows);
-
-  /* Adjust counts */
-  *out_row_ctr += num_rows;
-  upsample->rows_to_go -= num_rows;
-  upsample->next_row_out += num_rows;
-  /* When the buffer is emptied, declare this input row group consumed */
-  if (upsample->next_row_out >= cinfo->max_v_samp_factor)
-    (*in_row_group_ctr)++;
-}
-
-
-/*
- * These are the routines invoked by sep_upsample to upsample pixel values
- * of a single component.  One row group is processed per call.
- */
-
-
-/*
- * For full-size components, we just make color_buf[ci] point at the
- * input buffer, and thus avoid copying any data.  Note that this is
- * safe only because sep_upsample doesn't declare the input row group
- * "consumed" until we are done color converting and emitting it.
- */
-
-METHODDEF(void)
-fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		   JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  *output_data_ptr = input_data;
-}
-
-
-/*
- * This is a no-op version used for "uninteresting" components.
- * These components will not be referenced by color conversion.
- */
-
-METHODDEF(void)
-noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  *output_data_ptr = NULL;	/* safety check */
-}
-
-
-/*
- * This version handles any integral sampling ratios.
- * This is not used for typical JPEG files, so it need not be fast.
- * Nor, for that matter, is it particularly accurate: the algorithm is
- * simple replication of the input pixel onto the corresponding output
- * pixels.  The hi-falutin sampling literature refers to this as a
- * "box filter".  A box filter tends to introduce visible artifacts,
- * so if you are actually going to use 3:1 or 4:1 sampling ratios
- * you would be well advised to improve this code.
- */
-
-METHODDEF(void)
-int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	      JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr, outptr;
-  register JSAMPLE invalue;
-  register int h;
-  JSAMPROW outend;
-  int h_expand, v_expand;
-  int inrow, outrow;
-
-  h_expand = upsample->h_expand[compptr->component_index];
-  v_expand = upsample->v_expand[compptr->component_index];
-
-  inrow = outrow = 0;
-  while (outrow < cinfo->max_v_samp_factor) {
-    /* Generate one output row with proper horizontal expansion */
-    inptr = input_data[inrow];
-    outptr = output_data[outrow];
-    outend = outptr + cinfo->output_width;
-    while (outptr < outend) {
-      invalue = *inptr++;	/* don't need GETJSAMPLE() here */
-      for (h = h_expand; h > 0; h--) {
-	*outptr++ = invalue;
-      }
-    }
-    /* Generate any additional output rows by duplicating the first one */
-    if (v_expand > 1) {
-      jcopy_sample_rows(output_data, outrow, output_data, outrow+1,
-			v_expand-1, cinfo->output_width);
-    }
-    inrow++;
-    outrow += v_expand;
-  }
-}
-
-
-/*
- * Fast processing for the common case of 2:1 horizontal and 1:1 vertical.
- * It's still a box filter.
- */
-
-METHODDEF(void)
-h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr, outptr;
-  register JSAMPLE invalue;
-  JSAMPROW outend;
-  int inrow;
-
-  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
-    inptr = input_data[inrow];
-    outptr = output_data[inrow];
-    outend = outptr + cinfo->output_width;
-    while (outptr < outend) {
-      invalue = *inptr++;	/* don't need GETJSAMPLE() here */
-      *outptr++ = invalue;
-      *outptr++ = invalue;
-    }
-  }
-}
-
-
-/*
- * Fast processing for the common case of 2:1 horizontal and 2:1 vertical.
- * It's still a box filter.
- */
-
-METHODDEF(void)
-h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr, outptr;
-  register JSAMPLE invalue;
-  JSAMPROW outend;
-  int inrow, outrow;
-
-  inrow = outrow = 0;
-  while (outrow < cinfo->max_v_samp_factor) {
-    inptr = input_data[inrow];
-    outptr = output_data[outrow];
-    outend = outptr + cinfo->output_width;
-    while (outptr < outend) {
-      invalue = *inptr++;	/* don't need GETJSAMPLE() here */
-      *outptr++ = invalue;
-      *outptr++ = invalue;
-    }
-    jcopy_sample_rows(output_data, outrow, output_data, outrow+1,
-		      1, cinfo->output_width);
-    inrow++;
-    outrow += 2;
-  }
-}
-
-
-/*
- * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical.
- *
- * The upsampling algorithm is linear interpolation between pixel centers,
- * also known as a "triangle filter".  This is a good compromise between
- * speed and visual quality.  The centers of the output pixels are 1/4 and 3/4
- * of the way between input pixel centers.
- *
- * A note about the "bias" calculations: when rounding fractional values to
- * integer, we do not want to always round 0.5 up to the next integer.
- * If we did that, we'd introduce a noticeable bias towards larger values.
- * Instead, this code is arranged so that 0.5 will be rounded up or down at
- * alternate pixel locations (a simple ordered dither pattern).
- */
-
-METHODDEF(void)
-h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		     JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr, outptr;
-  register int invalue;
-  register JDIMENSION colctr;
-  int inrow;
-
-  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
-    inptr = input_data[inrow];
-    outptr = output_data[inrow];
-    /* Special case for first column */
-    invalue = GETJSAMPLE(*inptr++);
-    *outptr++ = (JSAMPLE) invalue;
-    *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2);
-
-    for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
-      /* General case: 3/4 * nearer pixel + 1/4 * further pixel */
-      invalue = GETJSAMPLE(*inptr++) * 3;
-      *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2);
-      *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2);
-    }
-
-    /* Special case for last column */
-    invalue = GETJSAMPLE(*inptr);
-    *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2);
-    *outptr++ = (JSAMPLE) invalue;
-  }
-}
-
-
-/*
- * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical.
- * Again a triangle filter; see comments for h2v1 case, above.
- *
- * It is OK for us to reference the adjacent input rows because we demanded
- * context from the main buffer controller (see initialization code).
- */
-
-METHODDEF(void)
-h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		     JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr0, inptr1, outptr;
-#if BITS_IN_JSAMPLE == 8
-  register int thiscolsum, lastcolsum, nextcolsum;
-#else
-  register INT32 thiscolsum, lastcolsum, nextcolsum;
-#endif
-  register JDIMENSION colctr;
-  int inrow, outrow, v;
-
-  inrow = outrow = 0;
-  while (outrow < cinfo->max_v_samp_factor) {
-    for (v = 0; v < 2; v++) {
-      /* inptr0 points to nearest input row, inptr1 points to next nearest */
-      inptr0 = input_data[inrow];
-      if (v == 0)		/* next nearest is row above */
-	inptr1 = input_data[inrow-1];
-      else			/* next nearest is row below */
-	inptr1 = input_data[inrow+1];
-      outptr = output_data[outrow++];
-
-      /* Special case for first column */
-      thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-      nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
-      lastcolsum = thiscolsum; thiscolsum = nextcolsum;
-
-      for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
-	/* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */
-	/* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */
-	nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-	*outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
-	*outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
-	lastcolsum = thiscolsum; thiscolsum = nextcolsum;
-      }
-
-      /* Special case for last column */
-      *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4);
-    }
-    inrow++;
-  }
-}
-
-
-/*
- * Module initialization routine for upsampling.
- */
-
-GLOBAL(void)
-jinit_upsampler (j_decompress_ptr cinfo)
-{
-  my_upsample_ptr upsample;
-  int ci;
-  jpeg_component_info * compptr;
-  boolean need_buffer, do_fancy;
-  int h_in_group, v_in_group, h_out_group, v_out_group;
-
-  upsample = (my_upsample_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_upsampler));
-  cinfo->upsample = (struct jpeg_upsampler *) upsample;
-  upsample->pub.start_pass = start_pass_upsample;
-  upsample->pub.upsample = sep_upsample;
-  upsample->pub.need_context_rows = FALSE; /* until we find out differently */
-
-  if (cinfo->CCIR601_sampling)	/* this isn't supported */
-    ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
-
-  /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1,
-   * so don't ask for it.
-   */
-  do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1;
-
-  /* Verify we can handle the sampling factors, select per-component methods,
-   * and create storage as needed.
-   */
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    /* Compute size of an "input group" after IDCT scaling.  This many samples
-     * are to be converted to max_h_samp_factor * max_v_samp_factor pixels.
-     */
-    h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
-    v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
-    h_out_group = cinfo->max_h_samp_factor;
-    v_out_group = cinfo->max_v_samp_factor;
-    upsample->rowgroup_height[ci] = v_in_group; /* save for use later */
-    need_buffer = TRUE;
-    if (! compptr->component_needed) {
-      /* Don't bother to upsample an uninteresting component. */
-      upsample->methods[ci] = noop_upsample;
-      need_buffer = FALSE;
-    } else if (h_in_group == h_out_group && v_in_group == v_out_group) {
-      /* Fullsize components can be processed without any work. */
-      upsample->methods[ci] = fullsize_upsample;
-      need_buffer = FALSE;
-    } else if (h_in_group * 2 == h_out_group &&
-	       v_in_group == v_out_group) {
-      /* Special cases for 2h1v upsampling */
-      if (do_fancy && compptr->downsampled_width > 2)
-	upsample->methods[ci] = h2v1_fancy_upsample;
-      else
-	upsample->methods[ci] = h2v1_upsample;
-    } else if (h_in_group * 2 == h_out_group &&
-	       v_in_group * 2 == v_out_group) {
-      /* Special cases for 2h2v upsampling */
-      if (do_fancy && compptr->downsampled_width > 2) {
-	upsample->methods[ci] = h2v2_fancy_upsample;
-	upsample->pub.need_context_rows = TRUE;
-      } else
-	upsample->methods[ci] = h2v2_upsample;
-    } else if ((h_out_group % h_in_group) == 0 &&
-	       (v_out_group % v_in_group) == 0) {
-      /* Generic integral-factors upsampling method */
-      upsample->methods[ci] = int_upsample;
-      upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group);
-      upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group);
-    } else
-      ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
-    if (need_buffer) {
-      upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 (JDIMENSION) jround_up((long) cinfo->output_width,
-				(long) cinfo->max_h_samp_factor),
-	 (JDIMENSION) cinfo->max_v_samp_factor);
-    }
-  }
-}