Remove libjpeg and libjpeg_turbo.

third_party/libjpeg/jdcolor.c

Index: third_party/libjpeg/jdcolor.c
diff --git a/third_party/libjpeg/jdcolor.c b/third_party/libjpeg/jdcolor.c
deleted file mode 100644
index 6c04dfe8aa1b36e4ab4c9909c77e9cd26b74e9d7..0000000000000000000000000000000000000000
--- a/third_party/libjpeg/jdcolor.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * jdcolor.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains output colorspace conversion routines.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private subobject */
-
-typedef struct {
-  struct jpeg_color_deconverter pub; /* public fields */
-
-  /* Private state for YCC->RGB conversion */
-  int * Cr_r_tab;		/* => table for Cr to R conversion */
-  int * Cb_b_tab;		/* => table for Cb to B conversion */
-  INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
-  INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
-} my_color_deconverter;
-
-typedef my_color_deconverter * my_cconvert_ptr;
-
-
-/**************** YCbCr -> RGB conversion: most common case **************/
-
-/*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- * The conversion equations to be implemented are therefore
- *	R = Y                + 1.40200 * Cr
- *	G = Y - 0.34414 * Cb - 0.71414 * Cr
- *	B = Y + 1.77200 * Cb
- * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
- *
- * To avoid floating-point arithmetic, we represent the fractional constants
- * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
- * the products by 2^16, with appropriate rounding, to get the correct answer.
- * Notice that Y, being an integral input, does not contribute any fraction
- * so it need not participate in the rounding.
- *
- * For even more speed, we avoid doing any multiplications in the inner loop
- * by precalculating the constants times Cb and Cr for all possible values.
- * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable.  It's not very reasonable for
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
- * colorspace anyway.
- * The Cr=>R and Cb=>B values can be rounded to integers in advance; the
- * values for the G calculation are left scaled up, since we must add them
- * together before rounding.
- */
-
-#define SCALEBITS	16	/* speediest right-shift on some machines */
-#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
-#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
-
-
-/*
- * Initialize tables for YCC->RGB colorspace conversion.
- */
-
-LOCAL(void)
-build_ycc_rgb_table (j_decompress_ptr cinfo)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  int i;
-  INT32 x;
-  SHIFT_TEMPS
-
-  cconvert->Cr_r_tab = (int *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(int));
-  cconvert->Cb_b_tab = (int *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(int));
-  cconvert->Cr_g_tab = (INT32 *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(INT32));
-  cconvert->Cb_g_tab = (INT32 *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(MAXJSAMPLE+1) * SIZEOF(INT32));
-
-  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
-    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
-    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
-    /* Cr=>R value is nearest int to 1.40200 * x */
-    cconvert->Cr_r_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
-    /* Cb=>B value is nearest int to 1.77200 * x */
-    cconvert->Cb_b_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
-    /* Cr=>G value is scaled-up -0.71414 * x */
-    cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
-    /* Cb=>G value is scaled-up -0.34414 * x */
-    /* We also add in ONE_HALF so that need not do it in inner loop */
-    cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
-  }
-}
-
-
-/*
- * Convert some rows of samples to the output colorspace.
- *
- * Note that we change from noninterleaved, one-plane-per-component format
- * to interleaved-pixel format.  The output buffer is therefore three times
- * as wide as the input buffer.
- * A starting row offset is provided only for the input buffer.  The caller
- * can easily adjust the passed output_buf value to accommodate any row
- * offset required on that side.
- */
-
-METHODDEF(void)
-ycc_rgb_convert (j_decompress_ptr cinfo,
-		 JSAMPIMAGE input_buf, JDIMENSION input_row,
-		 JSAMPARRAY output_buf, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int y, cb, cr;
-  register JSAMPROW outptr;
-  register JSAMPROW inptr0, inptr1, inptr2;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->output_width;
-  /* copy these pointers into registers if possible */
-  register JSAMPLE * range_limit = cinfo->sample_range_limit;
-  register int * Crrtab = cconvert->Cr_r_tab;
-  register int * Cbbtab = cconvert->Cb_b_tab;
-  register INT32 * Crgtab = cconvert->Cr_g_tab;
-  register INT32 * Cbgtab = cconvert->Cb_g_tab;
-  SHIFT_TEMPS
-
-  while (--num_rows >= 0) {
-    inptr0 = input_buf[0][input_row];
-    inptr1 = input_buf[1][input_row];
-    inptr2 = input_buf[2][input_row];
-    input_row++;
-    outptr = *output_buf++;
-    for (col = 0; col < num_cols; col++) {
-      y  = GETJSAMPLE(inptr0[col]);
-      cb = GETJSAMPLE(inptr1[col]);
-      cr = GETJSAMPLE(inptr2[col]);
-      /* Range-limiting is essential due to noise introduced by DCT losses. */
-      outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
-      outptr[RGB_GREEN] = range_limit[y +
-			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
-						 SCALEBITS))];
-      outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
-      outptr += RGB_PIXELSIZE;
-    }
-  }
-}
-
-
-/**************** Cases other than YCbCr -> RGB **************/
-
-
-/*
- * Color conversion for no colorspace change: just copy the data,
- * converting from separate-planes to interleaved representation.
- */
-
-METHODDEF(void)
-null_convert (j_decompress_ptr cinfo,
-	      JSAMPIMAGE input_buf, JDIMENSION input_row,
-	      JSAMPARRAY output_buf, int num_rows)
-{
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION count;
-  register int num_components = cinfo->num_components;
-  JDIMENSION num_cols = cinfo->output_width;
-  int ci;
-
-  while (--num_rows >= 0) {
-    for (ci = 0; ci < num_components; ci++) {
-      inptr = input_buf[ci][input_row];
-      outptr = output_buf[0] + ci;
-      for (count = num_cols; count > 0; count--) {
-	*outptr = *inptr++;	/* needn't bother with GETJSAMPLE() here */
-	outptr += num_components;
-      }
-    }
-    input_row++;
-    output_buf++;
-  }
-}
-
-
-/*
- * Color conversion for grayscale: just copy the data.
- * This also works for YCbCr -> grayscale conversion, in which
- * we just copy the Y (luminance) component and ignore chrominance.
- */
-
-METHODDEF(void)
-grayscale_convert (j_decompress_ptr cinfo,
-		   JSAMPIMAGE input_buf, JDIMENSION input_row,
-		   JSAMPARRAY output_buf, int num_rows)
-{
-  jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0,
-		    num_rows, cinfo->output_width);
-}
-
-
-/*
- * Convert grayscale to RGB: just duplicate the graylevel three times.
- * This is provided to support applications that don't want to cope
- * with grayscale as a separate case.
- */
-
-METHODDEF(void)
-gray_rgb_convert (j_decompress_ptr cinfo,
-		  JSAMPIMAGE input_buf, JDIMENSION input_row,
-		  JSAMPARRAY output_buf, int num_rows)
-{
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->output_width;
-
-  while (--num_rows >= 0) {
-    inptr = input_buf[0][input_row++];
-    outptr = *output_buf++;
-    for (col = 0; col < num_cols; col++) {
-      /* We can dispense with GETJSAMPLE() here */
-      outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
-      outptr += RGB_PIXELSIZE;
-    }
-  }
-}
-
-
-/*
- * Adobe-style YCCK->CMYK conversion.
- * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
- * conversion as above, while passing K (black) unchanged.
- * We assume build_ycc_rgb_table has been called.
- */
-
-METHODDEF(void)
-ycck_cmyk_convert (j_decompress_ptr cinfo,
-		   JSAMPIMAGE input_buf, JDIMENSION input_row,
-		   JSAMPARRAY output_buf, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int y, cb, cr;
-  register JSAMPROW outptr;
-  register JSAMPROW inptr0, inptr1, inptr2, inptr3;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->output_width;
-  /* copy these pointers into registers if possible */
-  register JSAMPLE * range_limit = cinfo->sample_range_limit;
-  register int * Crrtab = cconvert->Cr_r_tab;
-  register int * Cbbtab = cconvert->Cb_b_tab;
-  register INT32 * Crgtab = cconvert->Cr_g_tab;
-  register INT32 * Cbgtab = cconvert->Cb_g_tab;
-  SHIFT_TEMPS
-
-  while (--num_rows >= 0) {
-    inptr0 = input_buf[0][input_row];
-    inptr1 = input_buf[1][input_row];
-    inptr2 = input_buf[2][input_row];
-    inptr3 = input_buf[3][input_row];
-    input_row++;
-    outptr = *output_buf++;
-    for (col = 0; col < num_cols; col++) {
-      y  = GETJSAMPLE(inptr0[col]);
-      cb = GETJSAMPLE(inptr1[col]);
-      cr = GETJSAMPLE(inptr2[col]);
-      /* Range-limiting is essential due to noise introduced by DCT losses. */
-      outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];	/* red */
-      outptr[1] = range_limit[MAXJSAMPLE - (y +			/* green */
-			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
-						 SCALEBITS)))];
-      outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])];	/* blue */
-      /* K passes through unchanged */
-      outptr[3] = inptr3[col];	/* don't need GETJSAMPLE here */
-      outptr += 4;
-    }
-  }
-}
-
-
-/*
- * Empty method for start_pass.
- */
-
-METHODDEF(void)
-start_pass_dcolor (j_decompress_ptr cinfo)
-{
-  /* no work needed */
-}
-
-
-/*
- * Module initialization routine for output colorspace conversion.
- */
-
-GLOBAL(void)
-jinit_color_deconverter (j_decompress_ptr cinfo)
-{
-  my_cconvert_ptr cconvert;
-  int ci;
-
-  cconvert = (my_cconvert_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_color_deconverter));
-  cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
-  cconvert->pub.start_pass = start_pass_dcolor;
-
-  /* Make sure num_components agrees with jpeg_color_space */
-  switch (cinfo->jpeg_color_space) {
-  case JCS_GRAYSCALE:
-    if (cinfo->num_components != 1)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    break;
-
-  case JCS_RGB:
-  case JCS_YCbCr:
-    if (cinfo->num_components != 3)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    break;
-
-  case JCS_CMYK:
-  case JCS_YCCK:
-    if (cinfo->num_components != 4)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    break;
-
-  default:			/* JCS_UNKNOWN can be anything */
-    if (cinfo->num_components < 1)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    break;
-  }
-
-  /* Set out_color_components and conversion method based on requested space.
-   * Also clear the component_needed flags for any unused components,
-   * so that earlier pipeline stages can avoid useless computation.
-   */
-
-  switch (cinfo->out_color_space) {
-  case JCS_GRAYSCALE:
-    cinfo->out_color_components = 1;
-    if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
-	cinfo->jpeg_color_space == JCS_YCbCr) {
-      cconvert->pub.color_convert = grayscale_convert;
-      /* For color->grayscale conversion, only the Y (0) component is needed */
-      for (ci = 1; ci < cinfo->num_components; ci++)
-	cinfo->comp_info[ci].component_needed = FALSE;
-    } else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_RGB:
-    cinfo->out_color_components = RGB_PIXELSIZE;
-    if (cinfo->jpeg_color_space == JCS_YCbCr) {
-      cconvert->pub.color_convert = ycc_rgb_convert;
-      build_ycc_rgb_table(cinfo);
-    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
-      cconvert->pub.color_convert = gray_rgb_convert;
-    } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
-      cconvert->pub.color_convert = null_convert;
-    } else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_CMYK:
-    cinfo->out_color_components = 4;
-    if (cinfo->jpeg_color_space == JCS_YCCK) {
-      cconvert->pub.color_convert = ycck_cmyk_convert;
-      build_ycc_rgb_table(cinfo);
-    } else if (cinfo->jpeg_color_space == JCS_CMYK) {
-      cconvert->pub.color_convert = null_convert;
-    } else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  default:
-    /* Permit null conversion to same output space */
-    if (cinfo->out_color_space == cinfo->jpeg_color_space) {
-      cinfo->out_color_components = cinfo->num_components;
-      cconvert->pub.color_convert = null_convert;
-    } else			/* unsupported non-null conversion */
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-  }
-
-  if (cinfo->quantize_colors)
-    cinfo->output_components = 1; /* single colormapped output component */
-  else
-    cinfo->output_components = cinfo->out_color_components;
-}