| Index: source/libvpx/vp9/encoder/vp9_quantize.c
|
| ===================================================================
|
| --- source/libvpx/vp9/encoder/vp9_quantize.c (revision 251189)
|
| +++ source/libvpx/vp9/encoder/vp9_quantize.c (working copy)
|
| @@ -18,10 +18,6 @@
|
|
|
| #include "vp9/common/vp9_seg_common.h"
|
|
|
| -#ifdef ENC_DEBUG
|
| -extern int enc_debug;
|
| -#endif
|
| -
|
| void vp9_quantize_b_c(const int16_t *coeff_ptr, intptr_t count,
|
| int skip_block,
|
| const int16_t *zbin_ptr, const int16_t *round_ptr,
|
| @@ -83,55 +79,47 @@
|
| const int16_t *dequant_ptr,
|
| int zbin_oq_value, uint16_t *eob_ptr,
|
| const int16_t *scan, const int16_t *iscan) {
|
| - int i, rc, eob;
|
| - int zbins[2], nzbins[2];
|
| - int x, y, z, sz;
|
| + const int zbins[2] = { ROUND_POWER_OF_TWO(zbin_ptr[0] + zbin_oq_value, 1),
|
| + ROUND_POWER_OF_TWO(zbin_ptr[1] + zbin_oq_value, 1) };
|
| + const int nzbins[2] = {zbins[0] * -1, zbins[1] * -1};
|
| +
|
| int idx = 0;
|
| int idx_arr[1024];
|
| + int i, eob = -1;
|
|
|
| - vpx_memset(qcoeff_ptr, 0, n_coeffs*sizeof(int16_t));
|
| - vpx_memset(dqcoeff_ptr, 0, n_coeffs*sizeof(int16_t));
|
| + vpx_memset(qcoeff_ptr, 0, n_coeffs * sizeof(int16_t));
|
| + vpx_memset(dqcoeff_ptr, 0, n_coeffs * sizeof(int16_t));
|
|
|
| - eob = -1;
|
| -
|
| - // Base ZBIN
|
| - zbins[0] = ROUND_POWER_OF_TWO(zbin_ptr[0] + zbin_oq_value, 1);
|
| - zbins[1] = ROUND_POWER_OF_TWO(zbin_ptr[1] + zbin_oq_value, 1);
|
| - nzbins[0] = zbins[0] * -1;
|
| - nzbins[1] = zbins[1] * -1;
|
| -
|
| if (!skip_block) {
|
| // Pre-scan pass
|
| for (i = 0; i < n_coeffs; i++) {
|
| - rc = scan[i];
|
| - z = coeff_ptr[rc];
|
| + const int rc = scan[i];
|
| + const int coeff = coeff_ptr[rc];
|
|
|
| // If the coefficient is out of the base ZBIN range, keep it for
|
| // quantization.
|
| - if (z >= zbins[rc != 0] || z <= nzbins[rc != 0])
|
| + if (coeff >= zbins[rc != 0] || coeff <= nzbins[rc != 0])
|
| idx_arr[idx++] = i;
|
| }
|
|
|
| // Quantization pass: only process the coefficients selected in
|
| // pre-scan pass. Note: idx can be zero.
|
| for (i = 0; i < idx; i++) {
|
| - rc = scan[idx_arr[i]];
|
| + const int rc = scan[idx_arr[i]];
|
| + const int coeff = coeff_ptr[rc];
|
| + const int coeff_sign = (coeff >> 31);
|
| + int tmp;
|
| + int abs_coeff = (coeff ^ coeff_sign) - coeff_sign;
|
| + abs_coeff += ROUND_POWER_OF_TWO(round_ptr[rc != 0], 1);
|
| + abs_coeff = clamp(abs_coeff, INT16_MIN, INT16_MAX);
|
| + tmp = ((((abs_coeff * quant_ptr[rc != 0]) >> 16) + abs_coeff) *
|
| + quant_shift_ptr[rc != 0]) >> 15;
|
|
|
| - z = coeff_ptr[rc];
|
| - sz = (z >> 31); // sign of z
|
| - x = (z ^ sz) - sz; // x = abs(z)
|
| + qcoeff_ptr[rc] = (tmp ^ coeff_sign) - coeff_sign;
|
| + dqcoeff_ptr[rc] = qcoeff_ptr[rc] * dequant_ptr[rc != 0] / 2;
|
|
|
| - x += ROUND_POWER_OF_TWO(round_ptr[rc != 0], 1);
|
| - x = clamp(x, INT16_MIN, INT16_MAX);
|
| - y = ((((x * quant_ptr[rc != 0]) >> 16) + x) *
|
| - quant_shift_ptr[rc != 0]) >> 15; // quantize (x)
|
| -
|
| - x = (y ^ sz) - sz; // get the sign back
|
| - qcoeff_ptr[rc] = x; // write to destination
|
| - dqcoeff_ptr[rc] = x * dequant_ptr[rc != 0] / 2; // dequantized value
|
| -
|
| - if (y)
|
| - eob = idx_arr[i]; // last nonzero coeffs
|
| + if (tmp)
|
| + eob = idx_arr[i];
|
| }
|
| }
|
| *eob_ptr = eob + 1;
|
| @@ -140,8 +128,8 @@
|
| void vp9_regular_quantize_b_4x4(MACROBLOCK *x, int plane, int block,
|
| const int16_t *scan, const int16_t *iscan) {
|
| MACROBLOCKD *const xd = &x->e_mbd;
|
| - struct macroblock_plane* p = &x->plane[plane];
|
| - struct macroblockd_plane* pd = &xd->plane[plane];
|
| + struct macroblock_plane *p = &x->plane[plane];
|
| + struct macroblockd_plane *pd = &xd->plane[plane];
|
|
|
| vp9_quantize_b(BLOCK_OFFSET(p->coeff, block),
|
| 16, x->skip_block,
|
| @@ -227,38 +215,30 @@
|
| }
|
|
|
| void vp9_mb_init_quantizer(VP9_COMP *cpi, MACROBLOCK *x) {
|
| - int i;
|
| - VP9_COMMON *const cm = &cpi->common;
|
| + const VP9_COMMON *const cm = &cpi->common;
|
| MACROBLOCKD *xd = &x->e_mbd;
|
| - int zbin_extra;
|
| - int segment_id = xd->mi_8x8[0]->mbmi.segment_id;
|
| - const int qindex = vp9_get_qindex(&cpi->common.seg, segment_id,
|
| - cpi->common.base_qindex);
|
| + const int segment_id = xd->mi_8x8[0]->mbmi.segment_id;
|
| + const int qindex = vp9_get_qindex(&cm->seg, segment_id, cm->base_qindex);
|
| + const int rdmult = vp9_compute_rd_mult(cpi, qindex + cm->y_dc_delta_q);
|
| + const int zbin = cpi->zbin_mode_boost + x->act_zbin_adj;
|
| + int i;
|
|
|
| - int rdmult = vp9_compute_rd_mult(cpi, qindex + cm->y_dc_delta_q);
|
| -
|
| // Y
|
| - zbin_extra = (cpi->common.y_dequant[qindex][1] *
|
| - (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7;
|
| -
|
| x->plane[0].quant = cpi->y_quant[qindex];
|
| x->plane[0].quant_shift = cpi->y_quant_shift[qindex];
|
| x->plane[0].zbin = cpi->y_zbin[qindex];
|
| x->plane[0].round = cpi->y_round[qindex];
|
| - x->plane[0].zbin_extra = (int16_t)zbin_extra;
|
| - x->e_mbd.plane[0].dequant = cpi->common.y_dequant[qindex];
|
| + x->plane[0].zbin_extra = (int16_t)((cm->y_dequant[qindex][1] * zbin) >> 7);
|
| + xd->plane[0].dequant = cm->y_dequant[qindex];
|
|
|
| // UV
|
| - zbin_extra = (cpi->common.uv_dequant[qindex][1] *
|
| - (cpi->zbin_mode_boost + x->act_zbin_adj)) >> 7;
|
| -
|
| for (i = 1; i < 3; i++) {
|
| x->plane[i].quant = cpi->uv_quant[qindex];
|
| x->plane[i].quant_shift = cpi->uv_quant_shift[qindex];
|
| x->plane[i].zbin = cpi->uv_zbin[qindex];
|
| x->plane[i].round = cpi->uv_round[qindex];
|
| - x->plane[i].zbin_extra = (int16_t)zbin_extra;
|
| - x->e_mbd.plane[i].dequant = cpi->common.uv_dequant[qindex];
|
| + x->plane[i].zbin_extra = (int16_t)((cm->uv_dequant[qindex][1] * zbin) >> 7);
|
| + xd->plane[i].dequant = cm->uv_dequant[qindex];
|
| }
|
|
|
| #if CONFIG_ALPHA
|
| @@ -267,18 +247,14 @@
|
| x->plane[3].zbin = cpi->a_zbin[qindex];
|
| x->plane[3].round = cpi->a_round[qindex];
|
| x->plane[3].zbin_extra = (int16_t)zbin_extra;
|
| - x->e_mbd.plane[3].dequant = cpi->common.a_dequant[qindex];
|
| + xd->plane[3].dequant = cm->a_dequant[qindex];
|
| #endif
|
|
|
| - x->skip_block = vp9_segfeature_active(&cpi->common.seg, segment_id,
|
| - SEG_LVL_SKIP);
|
| -
|
| - /* save this macroblock QIndex for vp9_update_zbin_extra() */
|
| + x->skip_block = vp9_segfeature_active(&cm->seg, segment_id, SEG_LVL_SKIP);
|
| x->q_index = qindex;
|
|
|
| - /* R/D setup */
|
| - cpi->mb.errorperbit = rdmult >> 6;
|
| - cpi->mb.errorperbit += (cpi->mb.errorperbit == 0);
|
| + x->errorperbit = rdmult >> 6;
|
| + x->errorperbit += (x->errorperbit == 0);
|
|
|
| vp9_initialize_me_consts(cpi, x->q_index);
|
| }
|
|
|