| Index: platforms/stm/disco_fletch/generated/Src/stm32f7xx_hal_msp.c
|
| diff --git a/platforms/stm/disco_fletch/generated/Src/stm32f7xx_hal_msp.c b/platforms/stm/disco_fletch/generated/Src/stm32f7xx_hal_msp.c
|
| deleted file mode 100755
|
| index 01e2dc64b00ba29e65cdbf9743a92b2d67eae663..0000000000000000000000000000000000000000
|
| --- a/platforms/stm/disco_fletch/generated/Src/stm32f7xx_hal_msp.c
|
| +++ /dev/null
|
| @@ -1,997 +0,0 @@
|
| -/**
|
| - ******************************************************************************
|
| - * File Name : stm32f7xx_hal_msp.c
|
| - * Description : This file provides code for the MSP Initialization
|
| - * and de-Initialization codes.
|
| - ******************************************************************************
|
| - *
|
| - * COPYRIGHT(c) 2016 STMicroelectronics
|
| - *
|
| - * Redistribution and use in source and binary forms, with or without modification,
|
| - * are permitted provided that the following conditions are met:
|
| - * 1. Redistributions of source code must retain the above copyright notice,
|
| - * this list of conditions and the following disclaimer.
|
| - * 2. Redistributions in binary form must reproduce the above copyright notice,
|
| - * this list of conditions and the following disclaimer in the documentation
|
| - * and/or other materials provided with the distribution.
|
| - * 3. Neither the name of STMicroelectronics nor the names of its contributors
|
| - * may be used to endorse or promote products derived from this software
|
| - * without specific prior written permission.
|
| - *
|
| - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
| - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
| - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
| - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
| - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
| - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
| - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
| - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
| - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
| - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
| - *
|
| - ******************************************************************************
|
| - */
|
| -/* Includes ------------------------------------------------------------------*/
|
| -#include "stm32f7xx_hal.h"
|
| -
|
| -/* USER CODE BEGIN 0 */
|
| -
|
| -/* USER CODE END 0 */
|
| -
|
| -/**
|
| - * Initializes the Global MSP.
|
| - */
|
| -void HAL_MspInit(void)
|
| -{
|
| - /* USER CODE BEGIN MspInit 0 */
|
| -
|
| - /* USER CODE END MspInit 0 */
|
| -
|
| - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
|
| -
|
| - /* System interrupt init*/
|
| - /* SysTick_IRQn interrupt configuration */
|
| - HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
|
| -
|
| - /* USER CODE BEGIN MspInit 1 */
|
| -
|
| - /* USER CODE END MspInit 1 */
|
| -}
|
| -
|
| -void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(hdcmi->Instance==DCMI)
|
| - {
|
| - /* USER CODE BEGIN DCMI_MspInit 0 */
|
| -
|
| - /* USER CODE END DCMI_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __DCMI_CLK_ENABLE();
|
| -
|
| - /**DCMI GPIO Configuration
|
| - PE5 ------> DCMI_D6
|
| - PE6 ------> DCMI_D7
|
| - PD3 ------> DCMI_D5
|
| - PG9 ------> DCMI_VSYNC
|
| - PH14 ------> DCMI_D4
|
| - PH12 ------> DCMI_D3
|
| - PA4 ------> DCMI_HSYNC
|
| - PH9 ------> DCMI_D0
|
| - PH11 ------> DCMI_D2
|
| - PA6 ------> DCMI_PIXCLK
|
| - PH10 ------> DCMI_D1
|
| - */
|
| - GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF13_DCMI;
|
| - HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_3;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF13_DCMI;
|
| - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_9;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF13_DCMI;
|
| - HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_12|GPIO_PIN_9|GPIO_PIN_11
|
| - |GPIO_PIN_10;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF13_DCMI;
|
| - HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_6;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF13_DCMI;
|
| - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
| -
|
| - /* USER CODE BEGIN DCMI_MspInit 1 */
|
| -
|
| - /* USER CODE END DCMI_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
|
| -{
|
| -
|
| - if(hdcmi->Instance==DCMI)
|
| - {
|
| - /* USER CODE BEGIN DCMI_MspDeInit 0 */
|
| -
|
| - /* USER CODE END DCMI_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __DCMI_CLK_DISABLE();
|
| -
|
| - /**DCMI GPIO Configuration
|
| - PE5 ------> DCMI_D6
|
| - PE6 ------> DCMI_D7
|
| - PD3 ------> DCMI_D5
|
| - PG9 ------> DCMI_VSYNC
|
| - PH14 ------> DCMI_D4
|
| - PH12 ------> DCMI_D3
|
| - PA4 ------> DCMI_HSYNC
|
| - PH9 ------> DCMI_D0
|
| - PH11 ------> DCMI_D2
|
| - PA6 ------> DCMI_PIXCLK
|
| - PH10 ------> DCMI_D1
|
| - */
|
| - HAL_GPIO_DeInit(GPIOE, GPIO_PIN_5|GPIO_PIN_6);
|
| -
|
| - HAL_GPIO_DeInit(GPIOD, GPIO_PIN_3);
|
| -
|
| - HAL_GPIO_DeInit(GPIOG, GPIO_PIN_9);
|
| -
|
| - HAL_GPIO_DeInit(GPIOH, GPIO_PIN_14|GPIO_PIN_12|GPIO_PIN_9|GPIO_PIN_11
|
| - |GPIO_PIN_10);
|
| -
|
| - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4|GPIO_PIN_6);
|
| -
|
| - }
|
| - /* USER CODE BEGIN DCMI_MspDeInit 1 */
|
| -
|
| - /* USER CODE END DCMI_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
|
| -{
|
| -
|
| - if(hdma2d->Instance==DMA2D)
|
| - {
|
| - /* USER CODE BEGIN DMA2D_MspInit 0 */
|
| -
|
| - /* USER CODE END DMA2D_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __DMA2D_CLK_ENABLE();
|
| - /* USER CODE BEGIN DMA2D_MspInit 1 */
|
| -
|
| - /* USER CODE END DMA2D_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
|
| -{
|
| -
|
| - if(hdma2d->Instance==DMA2D)
|
| - {
|
| - /* USER CODE BEGIN DMA2D_MspDeInit 0 */
|
| -
|
| - /* USER CODE END DMA2D_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __DMA2D_CLK_DISABLE();
|
| - }
|
| - /* USER CODE BEGIN DMA2D_MspDeInit 1 */
|
| -
|
| - /* USER CODE END DMA2D_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(heth->Instance==ETH)
|
| - {
|
| - /* USER CODE BEGIN ETH_MspInit 0 */
|
| -
|
| - /* USER CODE END ETH_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __ETH_CLK_ENABLE();
|
| -
|
| - /**ETH GPIO Configuration
|
| - PG14 ------> ETH_TXD1
|
| - PG13 ------> ETH_TXD0
|
| - PG11 ------> ETH_TX_EN
|
| - PC1 ------> ETH_MDC
|
| - PA1 ------> ETH_REF_CLK
|
| - PC4 ------> ETH_RXD0
|
| - PA2 ------> ETH_MDIO
|
| - PC5 ------> ETH_RXD1
|
| - PA7 ------> ETH_CRS_DV
|
| - */
|
| - GPIO_InitStruct.Pin = RMII_TXD1_Pin|RMII_TXD0_Pin|RMII_TX_EN_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
| - HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
| - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = RMII_REF_CLK_Pin|RMII_MDIO_Pin|RMII_CRS_DV_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
|
| - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
| -
|
| - /* Peripheral interrupt init*/
|
| - HAL_NVIC_SetPriority(ETH_IRQn, 5, 0);
|
| - HAL_NVIC_EnableIRQ(ETH_IRQn);
|
| - /* USER CODE BEGIN ETH_MspInit 1 */
|
| -
|
| - /* USER CODE END ETH_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
|
| -{
|
| -
|
| - if(heth->Instance==ETH)
|
| - {
|
| - /* USER CODE BEGIN ETH_MspDeInit 0 */
|
| -
|
| - /* USER CODE END ETH_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __ETH_CLK_DISABLE();
|
| -
|
| - /**ETH GPIO Configuration
|
| - PG14 ------> ETH_TXD1
|
| - PG13 ------> ETH_TXD0
|
| - PG11 ------> ETH_TX_EN
|
| - PC1 ------> ETH_MDC
|
| - PA1 ------> ETH_REF_CLK
|
| - PC4 ------> ETH_RXD0
|
| - PA2 ------> ETH_MDIO
|
| - PC5 ------> ETH_RXD1
|
| - PA7 ------> ETH_CRS_DV
|
| - */
|
| - HAL_GPIO_DeInit(GPIOG, RMII_TXD1_Pin|RMII_TXD0_Pin|RMII_TX_EN_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOC, RMII_MDC_Pin|RMII_RXD0_Pin|RMII_RXD1_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOA, RMII_REF_CLK_Pin|RMII_MDIO_Pin|RMII_CRS_DV_Pin);
|
| -
|
| - /* Peripheral interrupt DeInit*/
|
| - HAL_NVIC_DisableIRQ(ETH_IRQn);
|
| -
|
| - }
|
| - /* USER CODE BEGIN ETH_MspDeInit 1 */
|
| -
|
| - /* USER CODE END ETH_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(hi2c->Instance==I2C1)
|
| - {
|
| - /* USER CODE BEGIN I2C1_MspInit 0 */
|
| -
|
| - /* USER CODE END I2C1_MspInit 0 */
|
| -
|
| - /**I2C1 GPIO Configuration
|
| - PB8 ------> I2C1_SCL
|
| - PB9 ------> I2C1_SDA
|
| - */
|
| - GPIO_InitStruct.Pin = ARDUINO_SCL_D15_Pin|ARDUINO_SDA_D14_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
|
| - GPIO_InitStruct.Pull = GPIO_PULLUP;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
|
| - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
| -
|
| - /* Peripheral clock enable */
|
| - __HAL_RCC_I2C1_CLK_ENABLE();
|
| - /* USER CODE BEGIN I2C1_MspInit 1 */
|
| -
|
| - /* USER CODE END I2C1_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
|
| -{
|
| -
|
| - if(hi2c->Instance==I2C1)
|
| - {
|
| - /* USER CODE BEGIN I2C1_MspDeInit 0 */
|
| -
|
| - /* USER CODE END I2C1_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __HAL_RCC_I2C1_CLK_DISABLE();
|
| -
|
| - /**I2C1 GPIO Configuration
|
| - PB8 ------> I2C1_SCL
|
| - PB9 ------> I2C1_SDA
|
| - */
|
| - HAL_GPIO_DeInit(GPIOB, ARDUINO_SCL_D15_Pin|ARDUINO_SDA_D14_Pin);
|
| -
|
| - }
|
| - /* USER CODE BEGIN I2C1_MspDeInit 1 */
|
| -
|
| - /* USER CODE END I2C1_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(hltdc->Instance==LTDC)
|
| - {
|
| - /* USER CODE BEGIN LTDC_MspInit 0 */
|
| -
|
| - /* USER CODE END LTDC_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __LTDC_CLK_ENABLE();
|
| -
|
| - /**LTDC GPIO Configuration
|
| - PE4 ------> LTDC_B0
|
| - PJ13 ------> LTDC_B1
|
| - PK7 ------> LTDC_DE
|
| - PK6 ------> LTDC_B7
|
| - PK5 ------> LTDC_B6
|
| - PG12 ------> LTDC_B4
|
| - PJ14 ------> LTDC_B2
|
| - PI10 ------> LTDC_HSYNC
|
| - PK4 ------> LTDC_B5
|
| - PJ15 ------> LTDC_B3
|
| - PI9 ------> LTDC_VSYNC
|
| - PK1 ------> LTDC_G6
|
| - PK2 ------> LTDC_G7
|
| - PI15 ------> LTDC_R0
|
| - PJ11 ------> LTDC_G4
|
| - PK0 ------> LTDC_G5
|
| - PI14 ------> LTDC_CLK
|
| - PJ8 ------> LTDC_G1
|
| - PJ10 ------> LTDC_G3
|
| - PJ7 ------> LTDC_G0
|
| - PJ9 ------> LTDC_G2
|
| - PJ6 ------> LTDC_R7
|
| - PJ4 ------> LTDC_R5
|
| - PJ5 ------> LTDC_R6
|
| - PJ3 ------> LTDC_R4
|
| - PJ2 ------> LTDC_R3
|
| - PJ0 ------> LTDC_R1
|
| - PJ1 ------> LTDC_R2
|
| - */
|
| - GPIO_InitStruct.Pin = LCD_B0_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
| - HAL_GPIO_Init(LCD_B0_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = LCD_B1_Pin|LCD_B2_Pin|LCD_B3_Pin|LCD_G4_Pin
|
| - |LCD_G1_Pin|LCD_G3_Pin|LCD_G0_Pin|LCD_G2_Pin
|
| - |LCD_R7_Pin|LCD_R5_Pin|LCD_R6_Pin|LCD_R4_Pin
|
| - |LCD_R3_Pin|LCD_R1_Pin|LCD_R2_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
| - HAL_GPIO_Init(GPIOJ, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = LCD_DE_Pin|LCD_B7_Pin|LCD_B6_Pin|LCD_B5_Pin
|
| - |LCD_G6_Pin|LCD_G7_Pin|LCD_G5_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
| - HAL_GPIO_Init(GPIOK, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = LCD_B4_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF9_LTDC;
|
| - HAL_GPIO_Init(LCD_B4_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = LCD_HSYNC_Pin|LCD_VSYNC_Pin|LCD_R0_Pin|LCD_CLK_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF14_LTDC;
|
| - HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
|
| -
|
| - /* USER CODE BEGIN LTDC_MspInit 1 */
|
| -
|
| - /* USER CODE END LTDC_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
|
| -{
|
| -
|
| - if(hltdc->Instance==LTDC)
|
| - {
|
| - /* USER CODE BEGIN LTDC_MspDeInit 0 */
|
| -
|
| - /* USER CODE END LTDC_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __LTDC_CLK_DISABLE();
|
| -
|
| - /**LTDC GPIO Configuration
|
| - PE4 ------> LTDC_B0
|
| - PJ13 ------> LTDC_B1
|
| - PK7 ------> LTDC_DE
|
| - PK6 ------> LTDC_B7
|
| - PK5 ------> LTDC_B6
|
| - PG12 ------> LTDC_B4
|
| - PJ14 ------> LTDC_B2
|
| - PI10 ------> LTDC_HSYNC
|
| - PK4 ------> LTDC_B5
|
| - PJ15 ------> LTDC_B3
|
| - PI9 ------> LTDC_VSYNC
|
| - PK1 ------> LTDC_G6
|
| - PK2 ------> LTDC_G7
|
| - PI15 ------> LTDC_R0
|
| - PJ11 ------> LTDC_G4
|
| - PK0 ------> LTDC_G5
|
| - PI14 ------> LTDC_CLK
|
| - PJ8 ------> LTDC_G1
|
| - PJ10 ------> LTDC_G3
|
| - PJ7 ------> LTDC_G0
|
| - PJ9 ------> LTDC_G2
|
| - PJ6 ------> LTDC_R7
|
| - PJ4 ------> LTDC_R5
|
| - PJ5 ------> LTDC_R6
|
| - PJ3 ------> LTDC_R4
|
| - PJ2 ------> LTDC_R3
|
| - PJ0 ------> LTDC_R1
|
| - PJ1 ------> LTDC_R2
|
| - */
|
| - HAL_GPIO_DeInit(LCD_B0_GPIO_Port, LCD_B0_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOJ, LCD_B1_Pin|LCD_B2_Pin|LCD_B3_Pin|LCD_G4_Pin
|
| - |LCD_G1_Pin|LCD_G3_Pin|LCD_G0_Pin|LCD_G2_Pin
|
| - |LCD_R7_Pin|LCD_R5_Pin|LCD_R6_Pin|LCD_R4_Pin
|
| - |LCD_R3_Pin|LCD_R1_Pin|LCD_R2_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOK, LCD_DE_Pin|LCD_B7_Pin|LCD_B6_Pin|LCD_B5_Pin
|
| - |LCD_G6_Pin|LCD_G7_Pin|LCD_G5_Pin);
|
| -
|
| - HAL_GPIO_DeInit(LCD_B4_GPIO_Port, LCD_B4_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOI, LCD_HSYNC_Pin|LCD_VSYNC_Pin|LCD_R0_Pin|LCD_CLK_Pin);
|
| -
|
| - }
|
| - /* USER CODE BEGIN LTDC_MspDeInit 1 */
|
| -
|
| - /* USER CODE END LTDC_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(hqspi->Instance==QUADSPI)
|
| - {
|
| - /* USER CODE BEGIN QUADSPI_MspInit 0 */
|
| -
|
| - /* USER CODE END QUADSPI_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __HAL_RCC_QSPI_CLK_ENABLE();
|
| -
|
| - /**QUADSPI GPIO Configuration
|
| - PE2 ------> QUADSPI_BK1_IO2
|
| - PB6 ------> QUADSPI_BK1_NCS
|
| - PB2 ------> QUADSPI_CLK
|
| - PD12 ------> QUADSPI_BK1_IO1
|
| - PD13 ------> QUADSPI_BK1_IO3
|
| - PD11 ------> QUADSPI_BK1_IO0
|
| - */
|
| - GPIO_InitStruct.Pin = QSPI_D2_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
|
| - HAL_GPIO_Init(QSPI_D2_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = QSPI_NCS_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI;
|
| - HAL_GPIO_Init(QSPI_NCS_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_2;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
|
| - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = QSPI_D1_Pin|QSPI_D3_Pin|QSPI_D0_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
|
| - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
| -
|
| - /* USER CODE BEGIN QUADSPI_MspInit 1 */
|
| -
|
| - /* USER CODE END QUADSPI_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
|
| -{
|
| -
|
| - if(hqspi->Instance==QUADSPI)
|
| - {
|
| - /* USER CODE BEGIN QUADSPI_MspDeInit 0 */
|
| -
|
| - /* USER CODE END QUADSPI_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __HAL_RCC_QSPI_CLK_DISABLE();
|
| -
|
| - /**QUADSPI GPIO Configuration
|
| - PE2 ------> QUADSPI_BK1_IO2
|
| - PB6 ------> QUADSPI_BK1_NCS
|
| - PB2 ------> QUADSPI_CLK
|
| - PD12 ------> QUADSPI_BK1_IO1
|
| - PD13 ------> QUADSPI_BK1_IO3
|
| - PD11 ------> QUADSPI_BK1_IO0
|
| - */
|
| - HAL_GPIO_DeInit(QSPI_D2_GPIO_Port, QSPI_D2_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOB, QSPI_NCS_Pin|GPIO_PIN_2);
|
| -
|
| - HAL_GPIO_DeInit(GPIOD, QSPI_D1_Pin|QSPI_D3_Pin|QSPI_D0_Pin);
|
| -
|
| - }
|
| - /* USER CODE BEGIN QUADSPI_MspDeInit 1 */
|
| -
|
| - /* USER CODE END QUADSPI_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_SD_MspInit(SD_HandleTypeDef* hsd)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(hsd->Instance==SDMMC1)
|
| - {
|
| - /* USER CODE BEGIN SDMMC1_MspInit 0 */
|
| -
|
| - /* USER CODE END SDMMC1_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __HAL_RCC_SDMMC1_CLK_ENABLE();
|
| -
|
| - /**SDMMC1 GPIO Configuration
|
| - PC12 ------> SDMMC1_CK
|
| - PC11 ------> SDMMC1_D3
|
| - PC10 ------> SDMMC1_D2
|
| - PD2 ------> SDMMC1_CMD
|
| - PC9 ------> SDMMC1_D1
|
| - PC8 ------> SDMMC1_D0
|
| - */
|
| - GPIO_InitStruct.Pin = SDMMC_CK_Pin|SDMMC_D3_Pin|SDMMC_D2_Pin|GPIO_PIN_9
|
| - |GPIO_PIN_8;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_SDMMC;
|
| - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = SDMMC_D0_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_SDMMC;
|
| - HAL_GPIO_Init(SDMMC_D0_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - /* USER CODE BEGIN SDMMC1_MspInit 1 */
|
| -
|
| - /* USER CODE END SDMMC1_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_SD_MspDeInit(SD_HandleTypeDef* hsd)
|
| -{
|
| -
|
| - if(hsd->Instance==SDMMC1)
|
| - {
|
| - /* USER CODE BEGIN SDMMC1_MspDeInit 0 */
|
| -
|
| - /* USER CODE END SDMMC1_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __HAL_RCC_SDMMC1_CLK_DISABLE();
|
| -
|
| - /**SDMMC1 GPIO Configuration
|
| - PC12 ------> SDMMC1_CK
|
| - PC11 ------> SDMMC1_D3
|
| - PC10 ------> SDMMC1_D2
|
| - PD2 ------> SDMMC1_CMD
|
| - PC9 ------> SDMMC1_D1
|
| - PC8 ------> SDMMC1_D0
|
| - */
|
| - HAL_GPIO_DeInit(GPIOC, SDMMC_CK_Pin|SDMMC_D3_Pin|SDMMC_D2_Pin|GPIO_PIN_9
|
| - |GPIO_PIN_8);
|
| -
|
| - HAL_GPIO_DeInit(SDMMC_D0_GPIO_Port, SDMMC_D0_Pin);
|
| -
|
| - }
|
| - /* USER CODE BEGIN SDMMC1_MspDeInit 1 */
|
| -
|
| - /* USER CODE END SDMMC1_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef* hspdifrx)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(hspdifrx->Instance==SPDIFRX)
|
| - {
|
| - /* USER CODE BEGIN SPDIFRX_MspInit 0 */
|
| -
|
| - /* USER CODE END SPDIFRX_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __HAL_RCC_SPDIFRX_CLK_ENABLE();
|
| -
|
| - /**SPDIFRX GPIO Configuration
|
| - PD7 ------> SPDIFRX_IN0
|
| - */
|
| - GPIO_InitStruct.Pin = SPDIF_RX0_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF8_SPDIFRX;
|
| - HAL_GPIO_Init(SPDIF_RX0_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - /* USER CODE BEGIN SPDIFRX_MspInit 1 */
|
| -
|
| - /* USER CODE END SPDIFRX_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef* hspdifrx)
|
| -{
|
| -
|
| - if(hspdifrx->Instance==SPDIFRX)
|
| - {
|
| - /* USER CODE BEGIN SPDIFRX_MspDeInit 0 */
|
| -
|
| - /* USER CODE END SPDIFRX_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __HAL_RCC_SPDIFRX_CLK_DISABLE();
|
| -
|
| - /**SPDIFRX GPIO Configuration
|
| - PD7 ------> SPDIFRX_IN0
|
| - */
|
| - HAL_GPIO_DeInit(SPDIF_RX0_GPIO_Port, SPDIF_RX0_Pin);
|
| -
|
| - }
|
| - /* USER CODE BEGIN SPDIFRX_MspDeInit 1 */
|
| -
|
| - /* USER CODE END SPDIFRX_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
| -{
|
| -
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if(huart->Instance==USART1)
|
| - {
|
| - /* USER CODE BEGIN USART1_MspInit 0 */
|
| -
|
| - /* USER CODE END USART1_MspInit 0 */
|
| - /* Peripheral clock enable */
|
| - __USART1_CLK_ENABLE();
|
| -
|
| - /**USART1 GPIO Configuration
|
| - PB7 ------> USART1_RX
|
| - PA9 ------> USART1_TX
|
| - */
|
| - GPIO_InitStruct.Pin = VCP_RX_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
| - HAL_GPIO_Init(VCP_RX_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = VCP_TX_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
|
| - GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
| - HAL_GPIO_Init(VCP_TX_GPIO_Port, &GPIO_InitStruct);
|
| -
|
| - /* Peripheral interrupt init*/
|
| - HAL_NVIC_SetPriority(USART1_IRQn, 5, 0);
|
| - HAL_NVIC_EnableIRQ(USART1_IRQn);
|
| - /* USER CODE BEGIN USART1_MspInit 1 */
|
| -
|
| - /* USER CODE END USART1_MspInit 1 */
|
| - }
|
| -
|
| -}
|
| -
|
| -void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
| -{
|
| -
|
| - if(huart->Instance==USART1)
|
| - {
|
| - /* USER CODE BEGIN USART1_MspDeInit 0 */
|
| -
|
| - /* USER CODE END USART1_MspDeInit 0 */
|
| - /* Peripheral clock disable */
|
| - __USART1_CLK_DISABLE();
|
| -
|
| - /**USART1 GPIO Configuration
|
| - PB7 ------> USART1_RX
|
| - PA9 ------> USART1_TX
|
| - */
|
| - HAL_GPIO_DeInit(VCP_RX_GPIO_Port, VCP_RX_Pin);
|
| -
|
| - HAL_GPIO_DeInit(VCP_TX_GPIO_Port, VCP_TX_Pin);
|
| -
|
| - /* Peripheral interrupt DeInit*/
|
| - HAL_NVIC_DisableIRQ(USART1_IRQn);
|
| -
|
| - }
|
| - /* USER CODE BEGIN USART1_MspDeInit 1 */
|
| -
|
| - /* USER CODE END USART1_MspDeInit 1 */
|
| -
|
| -}
|
| -
|
| -static int FMC_Initialized = 0;
|
| -
|
| -static void HAL_FMC_MspInit(void){
|
| - /* USER CODE BEGIN FMC_MspInit 0 */
|
| -
|
| - /* USER CODE END FMC_MspInit 0 */
|
| - GPIO_InitTypeDef GPIO_InitStruct;
|
| - if (FMC_Initialized) {
|
| - return;
|
| - }
|
| - FMC_Initialized = 1;
|
| - /* Peripheral clock enable */
|
| - __FMC_CLK_ENABLE();
|
| -
|
| - /** FMC GPIO Configuration
|
| - PE1 ------> FMC_NBL1
|
| - PE0 ------> FMC_NBL0
|
| - PG15 ------> FMC_SDNCAS
|
| - PD0 ------> FMC_D2
|
| - PD1 ------> FMC_D3
|
| - PF0 ------> FMC_A0
|
| - PF1 ------> FMC_A1
|
| - PF2 ------> FMC_A2
|
| - PF3 ------> FMC_A3
|
| - PG8 ------> FMC_SDCLK
|
| - PF4 ------> FMC_A4
|
| - PH5 ------> FMC_SDNWE
|
| - PH3 ------> FMC_SDNE0
|
| - PF5 ------> FMC_A5
|
| - PD15 ------> FMC_D1
|
| - PD10 ------> FMC_D15
|
| - PC3 ------> FMC_SDCKE0
|
| - PD14 ------> FMC_D0
|
| - PD9 ------> FMC_D14
|
| - PD8 ------> FMC_D13
|
| - PF12 ------> FMC_A6
|
| - PG1 ------> FMC_A11
|
| - PF15 ------> FMC_A9
|
| - PF13 ------> FMC_A7
|
| - PG0 ------> FMC_A10
|
| - PE8 ------> FMC_D5
|
| - PG5 ------> FMC_BA1
|
| - PG4 ------> FMC_BA0
|
| - PF14 ------> FMC_A8
|
| - PF11 ------> FMC_SDNRAS
|
| - PE9 ------> FMC_D6
|
| - PE11 ------> FMC_D8
|
| - PE14 ------> FMC_D11
|
| - PE7 ------> FMC_D4
|
| - PE10 ------> FMC_D7
|
| - PE12 ------> FMC_D9
|
| - PE15 ------> FMC_D12
|
| - PE13 ------> FMC_D10
|
| - */
|
| - GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_0|FMC_D5_Pin|FMC_D6_Pin
|
| - |FMC_D8_Pin|FMC_D11_Pin|FMC_D4_Pin|FMC_D7_Pin
|
| - |FMC_D9_Pin|FMC_D12_Pin|FMC_D10_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
| - HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_1|GPIO_PIN_0
|
| - |FMC_BA1_Pin|FMC_BA0_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
| - HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = FMC_D2_Pin|FMC_D3_Pin|FMC_D1_Pin|FMC_D15_Pin
|
| - |FMC_D0_Pin|FMC_D14_Pin|FMC_D13_Pin;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
| - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
| - |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15
|
| - |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_11;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
| - HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = FMC_SDNME_Pin|GPIO_PIN_3;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
| - HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
|
| -
|
| - GPIO_InitStruct.Pin = GPIO_PIN_3;
|
| - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
| - GPIO_InitStruct.Pull = GPIO_NOPULL;
|
| - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
|
| - GPIO_InitStruct.Alternate = GPIO_AF12_FMC;
|
| - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
| -
|
| - /* USER CODE BEGIN FMC_MspInit 1 */
|
| -
|
| - /* USER CODE END FMC_MspInit 1 */
|
| -}
|
| -
|
| -void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef* hsdram){
|
| - /* USER CODE BEGIN SDRAM_MspInit 0 */
|
| -
|
| - /* USER CODE END SDRAM_MspInit 0 */
|
| - HAL_FMC_MspInit();
|
| - /* USER CODE BEGIN SDRAM_MspInit 1 */
|
| -
|
| - /* USER CODE END SDRAM_MspInit 1 */
|
| -}
|
| -
|
| -static int FMC_DeInitialized = 0;
|
| -
|
| -static void HAL_FMC_MspDeInit(void){
|
| - /* USER CODE BEGIN FMC_MspDeInit 0 */
|
| -
|
| - /* USER CODE END FMC_MspDeInit 0 */
|
| - if (FMC_DeInitialized) {
|
| - return;
|
| - }
|
| - FMC_DeInitialized = 1;
|
| - /* Peripheral clock enable */
|
| - __FMC_CLK_DISABLE();
|
| -
|
| - /** FMC GPIO Configuration
|
| - PE1 ------> FMC_NBL1
|
| - PE0 ------> FMC_NBL0
|
| - PG15 ------> FMC_SDNCAS
|
| - PD0 ------> FMC_D2
|
| - PD1 ------> FMC_D3
|
| - PF0 ------> FMC_A0
|
| - PF1 ------> FMC_A1
|
| - PF2 ------> FMC_A2
|
| - PF3 ------> FMC_A3
|
| - PG8 ------> FMC_SDCLK
|
| - PF4 ------> FMC_A4
|
| - PH5 ------> FMC_SDNWE
|
| - PH3 ------> FMC_SDNE0
|
| - PF5 ------> FMC_A5
|
| - PD15 ------> FMC_D1
|
| - PD10 ------> FMC_D15
|
| - PC3 ------> FMC_SDCKE0
|
| - PD14 ------> FMC_D0
|
| - PD9 ------> FMC_D14
|
| - PD8 ------> FMC_D13
|
| - PF12 ------> FMC_A6
|
| - PG1 ------> FMC_A11
|
| - PF15 ------> FMC_A9
|
| - PF13 ------> FMC_A7
|
| - PG0 ------> FMC_A10
|
| - PE8 ------> FMC_D5
|
| - PG5 ------> FMC_BA1
|
| - PG4 ------> FMC_BA0
|
| - PF14 ------> FMC_A8
|
| - PF11 ------> FMC_SDNRAS
|
| - PE9 ------> FMC_D6
|
| - PE11 ------> FMC_D8
|
| - PE14 ------> FMC_D11
|
| - PE7 ------> FMC_D4
|
| - PE10 ------> FMC_D7
|
| - PE12 ------> FMC_D9
|
| - PE15 ------> FMC_D12
|
| - PE13 ------> FMC_D10
|
| - */
|
| - HAL_GPIO_DeInit(GPIOE, GPIO_PIN_1|GPIO_PIN_0|FMC_D5_Pin|FMC_D6_Pin
|
| - |FMC_D8_Pin|FMC_D11_Pin|FMC_D4_Pin|FMC_D7_Pin
|
| - |FMC_D9_Pin|FMC_D12_Pin|FMC_D10_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOG, GPIO_PIN_15|GPIO_PIN_8|GPIO_PIN_1|GPIO_PIN_0
|
| - |FMC_BA1_Pin|FMC_BA0_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOD, FMC_D2_Pin|FMC_D3_Pin|FMC_D1_Pin|FMC_D15_Pin
|
| - |FMC_D0_Pin|FMC_D14_Pin|FMC_D13_Pin);
|
| -
|
| - HAL_GPIO_DeInit(GPIOF, GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3
|
| - |GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_15
|
| - |GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_11);
|
| -
|
| - HAL_GPIO_DeInit(GPIOH, FMC_SDNME_Pin|GPIO_PIN_3);
|
| -
|
| - HAL_GPIO_DeInit(GPIOC, GPIO_PIN_3);
|
| -
|
| - /* USER CODE BEGIN FMC_MspDeInit 1 */
|
| -
|
| - /* USER CODE END FMC_MspDeInit 1 */
|
| -}
|
| -
|
| -void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef* hsdram){
|
| - /* USER CODE BEGIN SDRAM_MspDeInit 0 */
|
| -
|
| - /* USER CODE END SDRAM_MspDeInit 0 */
|
| - HAL_FMC_MspDeInit();
|
| - /* USER CODE BEGIN SDRAM_MspDeInit 1 */
|
| -
|
| - /* USER CODE END SDRAM_MspDeInit 1 */
|
| -}
|
| -
|
| -/* USER CODE BEGIN 1 */
|
| -
|
| -/* USER CODE END 1 */
|
| -
|
| -/**
|
| - * @}
|
| - */
|
| -
|
| -/**
|
| - * @}
|
| - */
|
| -
|
| -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
|
|
Chromium Code Reviews
Issue 1659163007:
Rename fletch -> dartino (Closed)
Base URL: https://github.com/dartino/sdk.git@master