Remove directories in mojo/public/third_party that just mirrored third_party.

mojo/public/third_party/ply/README

Index: mojo/public/third_party/ply/README
diff --git a/mojo/public/third_party/ply/README b/mojo/public/third_party/ply/README
deleted file mode 100644
index f384d1a9385314ea66369ebac4b65102291e1ffb..0000000000000000000000000000000000000000
--- a/mojo/public/third_party/ply/README
+++ /dev/null
@@ -1,271 +0,0 @@
-PLY (Python Lex-Yacc)                   Version 3.4
-
-Copyright (C) 2001-2011,
-David M. Beazley (Dabeaz LLC)
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-* Redistributions of source code must retain the above copyright notice,
-  this list of conditions and the following disclaimer.  
-* Redistributions in binary form must reproduce the above copyright notice, 
-  this list of conditions and the following disclaimer in the documentation
-  and/or other materials provided with the distribution.  
-* Neither the name of the David Beazley or Dabeaz LLC may be used to
-  endorse or promote products derived from this software without
-  specific prior written permission. 
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-Introduction
-============
-
-PLY is a 100% Python implementation of the common parsing tools lex
-and yacc. Here are a few highlights:
-
- -  PLY is very closely modeled after traditional lex/yacc.
-    If you know how to use these tools in C, you will find PLY
-    to be similar.
-
- -  PLY provides *very* extensive error reporting and diagnostic 
-    information to assist in parser construction.  The original
-    implementation was developed for instructional purposes.  As
-    a result, the system tries to identify the most common types
-    of errors made by novice users.  
-
- -  PLY provides full support for empty productions, error recovery,
-    precedence specifiers, and moderately ambiguous grammars.
-
- -  Parsing is based on LR-parsing which is fast, memory efficient, 
-    better suited to large grammars, and which has a number of nice
-    properties when dealing with syntax errors and other parsing problems.
-    Currently, PLY builds its parsing tables using the LALR(1)
-    algorithm used in yacc.
-
- -  PLY uses Python introspection features to build lexers and parsers.  
-    This greatly simplifies the task of parser construction since it reduces 
-    the number of files and eliminates the need to run a separate lex/yacc 
-    tool before running your program.
-
- -  PLY can be used to build parsers for "real" programming languages.
-    Although it is not ultra-fast due to its Python implementation,
-    PLY can be used to parse grammars consisting of several hundred
-    rules (as might be found for a language like C).  The lexer and LR 
-    parser are also reasonably efficient when parsing typically
-    sized programs.  People have used PLY to build parsers for
-    C, C++, ADA, and other real programming languages.
-
-How to Use
-==========
-
-PLY consists of two files : lex.py and yacc.py.  These are contained
-within the 'ply' directory which may also be used as a Python package.
-To use PLY, simply copy the 'ply' directory to your project and import
-lex and yacc from the associated 'ply' package.  For example:
-
-     import ply.lex as lex
-     import ply.yacc as yacc
-
-Alternatively, you can copy just the files lex.py and yacc.py
-individually and use them as modules.  For example:
-
-     import lex
-     import yacc
-
-The file setup.py can be used to install ply using distutils.
-
-The file doc/ply.html contains complete documentation on how to use
-the system.
-
-The example directory contains several different examples including a
-PLY specification for ANSI C as given in K&R 2nd Ed.   
-
-A simple example is found at the end of this document
-
-Requirements
-============
-PLY requires the use of Python 2.2 or greater.  However, you should
-use the latest Python release if possible.  It should work on just
-about any platform.  PLY has been tested with both CPython and Jython.
-It also seems to work with IronPython.
-
-Resources
-=========
-More information about PLY can be obtained on the PLY webpage at:
-
-     http://www.dabeaz.com/ply
-
-For a detailed overview of parsing theory, consult the excellent
-book "Compilers : Principles, Techniques, and Tools" by Aho, Sethi, and
-Ullman.  The topics found in "Lex & Yacc" by Levine, Mason, and Brown
-may also be useful.
-
-A Google group for PLY can be found at
-
-     http://groups.google.com/group/ply-hack
-
-Acknowledgments
-===============
-A special thanks is in order for all of the students in CS326 who
-suffered through about 25 different versions of these tools :-).
-
-The CHANGES file acknowledges those who have contributed patches.
-
-Elias Ioup did the first implementation of LALR(1) parsing in PLY-1.x. 
-Andrew Waters and Markus Schoepflin were instrumental in reporting bugs
-and testing a revised LALR(1) implementation for PLY-2.0.
-
-Special Note for PLY-3.0
-========================
-PLY-3.0 the first PLY release to support Python 3. However, backwards
-compatibility with Python 2.2 is still preserved. PLY provides dual
-Python 2/3 compatibility by restricting its implementation to a common
-subset of basic language features. You should not convert PLY using
-2to3--it is not necessary and may in fact break the implementation.
-
-Example
-=======
-
-Here is a simple example showing a PLY implementation of a calculator
-with variables.
-
-# -----------------------------------------------------------------------------
-# calc.py
-#
-# A simple calculator with variables.
-# -----------------------------------------------------------------------------
-
-tokens = (
-    'NAME','NUMBER',
-    'PLUS','MINUS','TIMES','DIVIDE','EQUALS',
-    'LPAREN','RPAREN',
-    )
-
-# Tokens
-
-t_PLUS    = r'\+'
-t_MINUS   = r'-'
-t_TIMES   = r'\*'
-t_DIVIDE  = r'/'
-t_EQUALS  = r'='
-t_LPAREN  = r'\('
-t_RPAREN  = r'\)'
-t_NAME    = r'[a-zA-Z_][a-zA-Z0-9_]*'
-
-def t_NUMBER(t):
-    r'\d+'
-    t.value = int(t.value)
-    return t
-
-# Ignored characters
-t_ignore = " \t"
-
-def t_newline(t):
-    r'\n+'
-    t.lexer.lineno += t.value.count("\n")
-    
-def t_error(t):
-    print("Illegal character '%s'" % t.value[0])
-    t.lexer.skip(1)
-    
-# Build the lexer
-import ply.lex as lex
-lex.lex()
-
-# Precedence rules for the arithmetic operators
-precedence = (
-    ('left','PLUS','MINUS'),
-    ('left','TIMES','DIVIDE'),
-    ('right','UMINUS'),
-    )
-
-# dictionary of names (for storing variables)
-names = { }
-
-def p_statement_assign(p):
-    'statement : NAME EQUALS expression'
-    names[p[1]] = p[3]
-
-def p_statement_expr(p):
-    'statement : expression'
-    print(p[1])
-
-def p_expression_binop(p):
-    '''expression : expression PLUS expression
-                  | expression MINUS expression
-                  | expression TIMES expression
-                  | expression DIVIDE expression'''
-    if p[2] == '+'  : p[0] = p[1] + p[3]
-    elif p[2] == '-': p[0] = p[1] - p[3]
-    elif p[2] == '*': p[0] = p[1] * p[3]
-    elif p[2] == '/': p[0] = p[1] / p[3]
-
-def p_expression_uminus(p):
-    'expression : MINUS expression %prec UMINUS'
-    p[0] = -p[2]
-
-def p_expression_group(p):
-    'expression : LPAREN expression RPAREN'
-    p[0] = p[2]
-
-def p_expression_number(p):
-    'expression : NUMBER'
-    p[0] = p[1]
-
-def p_expression_name(p):
-    'expression : NAME'
-    try:
-        p[0] = names[p[1]]
-    except LookupError:
-        print("Undefined name '%s'" % p[1])
-        p[0] = 0
-
-def p_error(p):
-    print("Syntax error at '%s'" % p.value)
-
-import ply.yacc as yacc
-yacc.yacc()
-
-while 1:
-    try:
-        s = raw_input('calc > ')   # use input() on Python 3
-    except EOFError:
-        break
-    yacc.parse(s)
-
-
-Bug Reports and Patches
-=======================
-My goal with PLY is to simply have a decent lex/yacc implementation
-for Python.  As a general rule, I don't spend huge amounts of time
-working on it unless I receive very specific bug reports and/or
-patches to fix problems. I also try to incorporate submitted feature
-requests and enhancements into each new version.  To contact me about
-bugs and/or new features, please send email to dave@dabeaz.com.
-
-In addition there is a Google group for discussing PLY related issues at
-
-    http://groups.google.com/group/ply-hack
- 
--- Dave
-
-
-
-
-
-
-
-
-